Commit Graph

27 Commits

Author SHA1 Message Date
Neil Horman 20c2c1fd6c sctp: add sctp/remaddr table to complete RFC remote address table OID
Add support for RFC3873 remote address table OID.

      +--(5) sctpAssocRemAddrTable
      |   |
      |   |--(-) sctpAssocId (shared index)
      |   |
      |   +--(1) sctpAssocRemAddrType (index)
      .   |
      .   +--(2) sctpAssocRemAddr (index)
      .   |
          +--(3) sctpAssocRemAddrActive
          |
          +--(4) sctpAssocRemAddrHBActive
          |
          +--(5) sctpAssocRemAddrRTO
          |
          +--(6) sctpAssocRemAddrMaxPathRtx
          |
          +--(7) sctpAssocRemAddrRtx
          |
          +--(8) sctpAssocRemAddrStartTime

This patch places all the requsite data in /proc/net/sctp/remaddr.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-09 15:14:50 -07:00
Robert P. J. Day 9dbc15f055 [SCTP]: "list_for_each()" -> "list_for_each_entry()" where appropriate.
Replacing (almost) all invocations of list_for_each() with
list_for_each_entry() tightens up the code and allows for the deletion
of numerous list iterator variables that are no longer necessary.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-12 18:54:24 -07:00
Neil Horman 30e9356007 [SCTP]: Correct /proc/net/assocs formatting error
Recently I posted a patch to add some informational items to
/proc/net/sctp/assocs.  All the information is correct, but because
of how the seqfile show operation is laid out, some of the formatting
is backwards.  This patch corrects that formatting, so that the new
information appears at the end of each line, rather than in the middle.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-12 18:53:48 -07:00
David S. Miller 255333c1db Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	net/mac80211/rc80211_pid_algo.c
2008-03-05 12:26:41 -08:00
Denis V. Lunev f0fd56ed40 [SCTP]: seq_printf format warning. (fixed)
sctp_association->hbinterval is unsigned long. Replace %8d with %8lu.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-03 11:55:54 -08:00
Neil Horman 58fbbed4fb [SCTP]: extend exported data in /proc/net/sctp/assoc
RFC 3873 specifies several MIB objects that can't be obtained by the
current data set exported by /proc/sys/net/sctp/assoc.  This patch
adds the missing pieces of data that allow us to compute all the
objects in the sctpAssocTable object.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29 11:40:56 -08:00
Pavel Emelyanov 459eea7410 [SCTP]: Use proc_create to setup de->proc_fops.
In addition to commit 160f17 ("[SCTP]: Use proc_create() to setup
->proc_fops first") use proc_create in two more places.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29 11:24:45 -08:00
Wang Chen 160f17e345 [SCTP]: Use proc_create() to setup ->proc_fops first
Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-28 14:13:16 -08:00
Pavel Emelyanov 3f5340a67e [SCTP]: Use snmp_fold_field instead of a homebrew analogue.
SCPT already depends in INET, so this doesn't create additional
dependencies.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-09 23:23:44 -08:00
Vlad Yasevich 60c778b259 [SCTP]: Stop claiming that this is a "reference implementation"
I was notified by Randy Stewart that lksctp claims to be
"the reference implementation".  First of all, "the
refrence implementation" was the original implementation
of SCTP in usersapce written ty Randy and a few others.
Second, after looking at the definiton of 'reference implementation',
we don't really meet the requirements.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2008-02-05 10:59:07 -05:00
Vlad Yasevich d970dbf845 SCTP: Convert custom hash lists to use hlist.
Convert the custom hash list traversals to use hlist functions.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-11-09 11:43:40 -05:00
Philippe De Muyter 56b3d975bb [NET]: Make all initialized struct seq_operations const.
Make all initialized struct seq_operations in net/ const

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 23:07:31 -07:00
Arjan van de Ven da7071d7e3 [PATCH] mark struct file_operations const 8
Many struct file_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:46 -08:00
YOSHIFUJI Hideaki d808ad9ab8 [NET] SCTP: Fix whitespace errors.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10 23:20:11 -08:00
Al Viro acd2bc96e1 [SCTP]: Switch ->primary_addr to net-endian.
Users adjusted.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02 21:26:34 -08:00
Al Viro 5f242a13e8 [SCTP]: Switch ->cmp_addr() and sctp_cmp_addr_exact() to net-endian.
instances of ->cmp_addr() are fine with switching both arguments
to net-endian; callers other than in sctp_cmp_addr_exact() (both
as ->cmp_addr(...) and direct calls of instances) adjusted;
sctp_cmp_addr_exact() switched to net-endian itself and adjustment
is done in its callers

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02 21:26:32 -08:00
Al Viro c604e368a4 [SCTP]: Pass net-endian to ->seq_dump_addr()
No actual modifications of method instances are needed -
they don't look at port numbers.  Switch callers...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02 21:26:31 -08:00
Al Viro 09ef7fecea [SCTP]: Beginning of conversion to net-endian for embedded sctp_addr.
Part 1: rename sctp_chunk->source, sctp_sockaddr_entry->a,
sctp_transport->ipaddr and sctp_transport->saddr (to ..._h)

The next patch will reintroduce these fields and keep them as
net-endian mirrors of the original (renamed) ones.  Split in
two patches to make sure that we hadn't forgotten any instanes.

Later in the series we'll eliminate uses of host-endian variants
(basically switching users to net-endian counterparts as we
progress through that mess).  Then host-endian ones will die.

Other embedded host-endian sctp_addr will be easier to switch
directly, so we leave them alone for now.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02 21:26:29 -08:00
Vlad Yasevich 6aa2551cf1 [SCTP]: Fix the RX queue size shown in /proc/net/sctp/assocs output.
Show the true receive buffer usage.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-11 23:59:46 -07:00
Sridhar Samudrala ac0b046272 [SCTP]: Extend /proc/net/sctp/snmp to provide more statistics.
This patch adds more statistics info under /proc/net/sctp/snmp
that should be useful for debugging. The additional events that
are counted now include timer expirations, retransmits, packet
and data chunk discards.

The Data chunk discards include all the cases where a data chunk
is discarded including high tsn, bad stream, dup tsn and the most
useful one(out of receive buffer/rwnd).

Also moved the SCTP MIB data structures from the generic include
directories to include/sctp/sctp.h.

Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 14:55:16 -07:00
KAMEZAWA Hiroyuki 6f91204225 [PATCH] for_each_possible_cpu: network codes
for_each_cpu() actually iterates across all possible CPUs.  We've had mistakes
in the past where people were using for_each_cpu() where they should have been
iterating across only online or present CPUs.  This is inefficient and
possibly buggy.

We're renaming for_each_cpu() to for_each_possible_cpu() to avoid this in the
future.

This patch replaces for_each_cpu with for_each_possible_cpu under /net

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:31 -07:00
Vlad Yasevich 38b0e42aba [SCTP]: Fix sctp_assoc_seq_show() panics on big-endian systems.
This patch corrects the panic by casting the argument to the
pointer of correct size.  On big-endian systems we ended up loading
only 32 bits of data because we are treating the pointer as an int*.
By treating this pointer as loff_t*, we'll load the full 64 bits
and then let regular integer demotion take place which will give us
the correct value.

Signed-off-by: Vlad Yaseivch <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
2006-01-17 11:54:06 -08:00
Vlad Yasevich 49392e5ecf [SCTP]: sctp doesn't show all associations/endpoints in /proc
When creating a very large number of associations (and endpoints),
/proc/assocs and /proc/eps will not show all of them.  As a result
netstat will not show all of the either.  This is particularly evident
when creating 1000+ associations (or endpoints).  As an example with
1500 tcp style associations over loopback, netstat showed 1420 on my
system instead of 3000.

The reason for this is that the seq_operations start method is invoked
multiple times bacause of the amount of data that is provided.  The
start method always increments the position parameter and since we use
the position as the hash bucket id, we end up skipping hash buckets.

This patch corrects this situation and get's rid of the silly hash-1
decrement.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
2006-01-17 11:53:06 -08:00
John Hawkes 670c02c2bf [NET]: Wider use of for_each_*cpu()
In 'net' change the explicit use of for-loops and NR_CPUS into the
general for_each_cpu() or for_each_online_cpu() constructs, as
appropriate.  This widens the scope of potential future optimizations
of the general constructs, as well as takes advantage of the existing
optimizations of first_cpu() and next_cpu(), which is advantageous
when the true CPU count is much smaller than NR_CPUS.

Signed-off-by: John Hawkes <hawkes@sgi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-10-25 23:54:01 -02:00
Vlad Yasevich d2287f8441 [SCTP]: Add SENTINEL to SCTP MIB stats
Add SNMP_MIB_SENTINEL to the definition of the sctp_snmp_list so that
the output routine in proc correctly terminates.  This was causing some
problems running on ia64 systems.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-23 10:12:04 -07:00
Vladislav Yasevich bca735bd0d [SCTP] Extend the info exported via /proc/net/sctp to support netstat for SCTP.
Signed-off-by: Vladislav Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-13 15:11:57 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00