Commit Graph

32 Commits

Author SHA1 Message Date
Eric Anholt 30b2363408 drm: Rip out the racy, unused vblank signal code.
Schedule a vblank signal, kill the process, and we'll go walking over freed
memory.  Given that no open-source userland exists using this, nor have I
ever heard of a consumer, just let this code die.

Signed-off-by: Eric Anholt <eric@anholt.net>
Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-28 07:50:14 -08:00
Jesse Barnes ad2563c2e4 drm: create mode_config idr lock
Create a separate mode_config IDR lock for simplicity.  The core DRM
config structures (connector, mode, etc. lists) are still protected by
the mode_config mutex, but the CRTC IDR (used for the various identifier
IDs) is now protected by the mode_config idr_mutex.  Simplifies the
locking a bit and removes a warning.

All objects are protected by the config mutex, we may in the future,
split the object further to have reference counts.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-01-22 17:53:05 +10:00
Jesse Barnes 40a518d9f1 drm: initial KMS config fixes
When mode setting is first initialized, the driver will call into
drm_helper_initial_config() to set up an initial output and framebuffer
configuration.  This routine is responsible for probing the available
connectors, encoders, and crtcs, looking for modes and putting together
something reasonable (where reasonable is defined as "allows kernel
messages to be visible on as many displays as possible").

However, the code was a bit too aggressive in setting default modes when
none were found on a given connector.  Even if some connectors had modes,
any connectors found lacking modes would have the default 800x600 mode added
to their mode list, which in some cases could cause problems later down the
line.  In my case, the LVDS was perfectly available, but the initial config
code added 800x600 modes to both of the detected but unavailable HDMI
connectors (which are on my non-existent docking station).  This ended up
preventing later code from setting a mode on my LVDS, which is bad.

This patch fixes that behavior by making the initial config code walk
through the connectors first, counting the available modes, before it decides
to add any default modes to a possibly connected output.  It also fixes the
logic in drm_target_preferred() that was causing zeroed out modes to be set
as the preferred mode for a given connector, even if no modes were available.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-01-16 18:40:54 +10:00
Eric Anholt fede5c91c4 drm: Add a debug node for vblank state.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-12-29 17:47:27 +10:00
Kristian Høgsberg 3c4fdcfb29 drm: pin new and unpin old buffer when setting a mode.
This removes the requirement for user space to pin a buffer before
setting a mode that is backed by the pixels from that buffer.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-12-29 17:47:27 +10:00
Eric Anholt 8d391aa410 drm/i915: Add missing userland definitions for gem init/execbuffer.
fdo bug #19132.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:25 +10:00
Dave Airlie dfef245922 i915/drm: provide compat defines for userspace for certain struct members.
Painfully userspace started using new names that were never actually to be
used from the external repo.

Also fill out the gaps in the structure for old/new userspace compat

Add compat defines for these structs.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:25 +10:00
Kristian H�gsberg 0c7c266475 drm: drop DRM_IOCTL_MODE_REPLACEFB, add+remove works just as well.
The replace fb ioctl replaces the backing buffer object for a modesetting
framebuffer object.  This can be acheived by just creating a new
framebuffer backed by the new buffer object, setting that for the crtcs
in question and then removing the old framebuffer object.

Signed-off-by: Kristian Hogsberg <krh@redhat.com>
Acked-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:25 +10:00
Jakob Bornecrantz e0c8463a8b drm: sanitise drm modesetting API + remove unused hotplug
The initially merged modesetting API has some uglies in it, this
cleans up the struct members and ioctl ordering for initial submission.

It also removes the unneeded hotplug infrastructure.

airlied:- I've pulled this patch in from git modesetting-gem tree.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:25 +10:00
Jesse Barnes 79e539453b DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported.  HDMI, DisplayPort and additional SDVO output support will
follow.

Support for the mode setting code is controlled by the new 'modeset'
module option.  A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.

Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing.  So use caution when
enabling this code; be sure your user level code supports the new
interfaces.

A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.

Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:23 +10:00
Dave Airlie f453ba0460 DRM: add mode setting support
Add mode setting support to the DRM layer.

This is a fairly big chunk of work that allows DRM drivers to provide
full output control and configuration capabilities to userspace.  It was
motivated by several factors:
  - the fb layer's APIs aren't suited for anything but simple
    configurations
  - coordination between the fb layer, DRM layer, and various userspace
    drivers is poor to non-existent (radeonfb excepted)
  - user level mode setting drivers makes displaying panic & oops
    messages more difficult
  - suspend/resume of graphics state is possible in many more
    configurations with kernel level support

This commit just adds the core DRM part of the mode setting APIs.
Driver specific commits using these new structure and APIs will follow.

Co-authors: Jesse Barnes <jbarnes@virtuousgeek.org>, Jakob Bornecrantz <jakob@tungstengraphics.com>
Contributors: Alan Hourihane <alanh@tungstengraphics.com>, Maarten Maathuis <madman2003@gmail.com>

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:23 +10:00
Jesse Barnes de151cf67c drm/i915: add GEM GTT mapping support
Use the new core GEM object mapping code to allow GTT mapping of GEM
objects on i915.  The fault handler will make sure a fence register is
allocated too, if the object in question is tiled.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:23 +10:00
Jesse Barnes a2c0a97b78 drm: GEM mmap support
Add core support for mapping of GEM objects.  Drivers should provide a
vm_operations_struct if they want to support page faulting of objects.
The code for handling GEM object offsets was taken from TTM, which was
written by Thomas Hellström.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:22 +10:00
Vegard Nossum 1147c9cdd0 drm: fix leak of uninitialized data to userspace
...so drm_getunique() is trying to copy some uninitialized data to
userspace. The ECX register contains the number of words that are
left to copy -- so there are 5 * 4 = 20 bytes left. The offset of the
first uninitialized byte (counting from the start of the string) is
also 20 (i.e. 0xf65d2294&((1 << 5)-1) == 20). So somebody tried to
copy 40 bytes when the string was only 19 long.

In drm_set_busid() we have this code:

        dev->unique_len = 40;
        dev->unique = drm_alloc(dev->unique_len + 1, DRM_MEM_DRIVER);
      ...
        len = snprintf(dev->unique, dev->unique_len, pci:%04x:%02x:%02x.%d",

...so it seems that dev->unique is never updated to reflect the
actual length of the string. The remaining bytes (20 in this case)
are random uninitialized bytes that are copied into userspace.

This patch fixes the problem by setting dev->unique_len after the
snprintf().

airlied- I've had to fix this up to store the alloced size so
we have it for drm_free later.

Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Vegard Nossum <vegardno@thuin.ifi.uio.no>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:22 +10:00
Dave Airlie 7c1c2871a6 drm: move to kref per-master structures.
This is step one towards having multiple masters sharing a drm
device in order to get fast-user-switching to work.

It splits out the information associated with the drm master
into a separate kref counted structure, and allocates this when
a master opens the device node. It also allows the current master
to abdicate (say while VT switched), and a new master to take over
the hardware.

It moves the Intel and radeon drivers to using the sarea from
within the new master structures.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:22 +10:00
Dave Airlie e7f7ab45eb drm: cleanup exit path for module unload
The current sub-module unload exit path is a mess, it tries
to abuse the idr. Just keep a list of devices per driver struct
and free them in-order on rmmod.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:21 +10:00
Keith Packard 52440211dc drm: move drm vblank initialization/cleanup to driver load/unload
drm vblank initialization keeps track of the changes in driver-supplied
frame counts across vt switch and mode setting, but only if you let it by
not tearing down the drm vblank structure.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-25 09:49:03 +10:00
Dave Airlie afa21e0584 drm/i915: Filter pci devices based on PCI_CLASS_DISPLAY_VGA
This fixes hangs on 855-class hardware by avoiding double attachment of the
driver due to the stub second head device having the same pci id as the real
device.

Other DRM drivers probably want this treatment as well, but I'm applying it
just to this one for safety. But we should clean up the drm_pciids.h mess
now so that each driver has its own pci id list header in its own directory.
Lets do that in the next release.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-11 18:02:12 +10:00
Eric Anholt 5d8e6bb7a2 drm: Remove infrastructure for supporting i915's vblank swapping.
It's not used in any other drivers, and doesn't look like it will be from
drm.git master.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-11-11 17:44:26 +10:00
Eric Anholt 5a125c3c79 i915: Add GEM ioctl to get available aperture size.
This will let userland know when to submit its batchbuffers, before they get
too big to fit in the aperture.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-03 10:56:49 +10:00
Alex Deucher edc6f389f6 radeon: fix PCI bus mastering support enables.
Someone noticed these registers moved around for later chips,
so we redo the codepaths per-chip. PCIE chips don't appear to
require explicit enables.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18 07:10:54 +10:00
Alex Deucher b2ceddfa52 radeon: add RS400 family support.
This adds support for the RS400 family of IGPs for Intel CPUs.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18 07:10:54 +10:00
Alex Deucher f0738e9240 drm/radeon: add support for RS740 IGP chipsets.
This adds support for the HS2100 IGP chipset.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18 07:10:54 +10:00
Keith Packard ba1eb1d825 i915: Map status page cached for chips with GTT-based HWS location.
This should improve performance by avoiding uncached reads by the CPU (the
point of having a status page), and may improve stability.  This patch only
affects G33, GM45 and G45 chips as those are the only ones using GTT-based
HWS mappings.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18 07:10:53 +10:00
Jesse Barnes 9bfbd5cb72 drm: kill drm_device->irq
Like the last patch but adds a macro to get at the irq value instead of
dereferencing pdev directly.  Should  make things easier for the BSD guys and
if we ever support non-PCI devices.

Signed-off-by:  Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18 07:10:53 +10:00
Kristian Høgsberg dbb19d302b i915 gem: install and uninstall irq handler in entervt and leavevt ioctls.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18 07:10:52 +10:00
Kristian Høgsberg ed4c9c4acf i915: Add chip set ID param.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18 07:10:12 +10:00
Eric Anholt 673a394b1e drm: Add GEM ("graphics execution manager") to i915 driver.
GEM allows the creation of persistent buffer objects accessible by the
graphics device through new ioctls for managing execution of commands on the
device.  The userland API is almost entirely driver-specific to ensure that
any driver building on this model can easily map the interface to individual
driver requirements.

GEM is used by the 2d driver for managing its internal state allocations and
will be used for pixmap storage to reduce memory consumption and enable
zero-copy GLX_EXT_texture_from_pixmap, and in the 3d driver is used to enable
GL_EXT_framebuffer_object and GL_ARB_pixel_buffer_object.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18 07:10:12 +10:00
Jesse Barnes 0a3e67a4ca drm: Rework vblank-wait handling to allow interrupt reduction.
Previously, drivers supporting vblank interrupt waits would run the interrupt
all the time, or all the time that any 3d client was running, preventing the
CPU from sleeping for long when the system was otherwise idle.  Now, interrupts
are disabled any time that no client is waiting on a vblank event. The new
method uses vblank counters on the chipsets when the interrupts are turned
off, rather than counting interrupts, so that we can continue to present
accurate vblank numbers.

Co-author: Michel Dänzer <michel@tungstengraphics.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18 07:10:11 +10:00
Carlos R. Mafra ddb7f4cb81 drm: remove #define's for non-linux systems
There is no point in considering FreeBSD et al.  in the linux kernel
source code.

Signed-off-by: Carlos R. Mafra <crmafra@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18 07:10:09 +10:00
Dave Airlie 242e3df80b drm/radeon: fixup issue with radeon and PAT support.
With new userspace libpciaccess we can get a conflicting mapping
on the PCIE GART table in the video RAM. Always try and map it _wc.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-15 15:48:05 +10:00
Dave Airlie c0e09200dc drm: reorganise drm tree to be more future proof.
With the coming of kernel based modesetting and the memory manager stuff,
the everything in one directory approach was getting very ugly and
starting to be unmanageable.

This restructures the drm along the lines of other kernel components.

It creates a drivers/gpu/drm directory and moves the hw drivers into
subdirectores. It moves the includes into an include/drm, and
sets up the unifdef for the userspace headers we should be exporting.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-14 10:45:01 +10:00