Commit Graph

24 Commits

Author SHA1 Message Date
Nicholas Bellinger 5b9a4d7280 target: Add MI_REPORT_TARGET_PGS ext. header + implict_trans_secs attribute
This patch adds support for ALUA MI_REPORT_TARGET_PGS extended header
format defined within SPC-4.  It changes target core ALUA emulation logic
within target_emulate_report_target_port_groups() to support both the
extended and original length only header formats.

It includes adding a new 'implict_trans_secs' attribute for each ALUA
target port group to control the value returned to the application client
for an recommended implict translation timeout in seconds.  By default
this value is currently set to zero, and limited up to 255 by virtue of
using a single byte in the extended header format.

This value is used by target_emulate_report_target_port_groups() within
the extended header logic to set IMPLICIT TRANSITION TIME as defined by
spc4r30.

Cc: Hannes Reinecke <hare@suse.de>
Cc: Rob Evers <revers@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-17 00:45:58 -07:00
Nicholas Bellinger ba539743b7 target: Fix MAINTENANCE_IN service action CDB checks to use lower 5 bits
This patch fixes the MAINTENANCE_IN service action type checks to only
look at the proper lower 5 bits of cdb byte 1.  This addresses the case
where MI_REPORT_TARGET_PGS w/ extended header using the upper three bits of
cdb byte 1 was not processed correctly in transport_generic_cmd_sequencer,
as well as the three cases for standby, unavailable, and transition ALUA
primary access state checks.

Also add MAINTENANCE_IN to the excluded list in transport_generic_prepare_cdb()
to prevent the PARAMETER DATA FORMAT bits from being cleared.

Cc: Hannes Reinecke <hare@suse.de>
Cc: Rob Evers <revers@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-17 00:45:58 -07:00
Christoph Hellwig 6bb35e009b target: replace ->execute_task with ->execute_cmd
Make CDB emulation work on commands instead of tasks again as a preparation
of removing tasks completely.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:11:14 -07:00
Roland Dreier 33395fb8a1 target: Fix 16-bit target ports for SET TARGET PORT GROUPS emulation
The old code did (MSB << 8) & 0xff, which always evaluates to 0.  Just use
get_unaligned_be16() so we don't have to worry about whether our open-coded
version is correct or not.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:50 -08:00
Andy Grover 4949314c72 target: Allow control CDBs with data > 1 page
We need to handle >1 page control cdbs, so extend the code to do a vmap
if bigger than 1 page. It seems like kmap() is still preferable if just
a page, fewer TLB shootdowns(?), so keep using that when possible.

Rename function pair for their new scope.

Signed-off-by: Andy Grover <agrover@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-01-18 08:35:58 +00:00
Christoph Hellwig c4795fb20e target: header reshuffle, part2
This reorganized the headers under include/target into:

 - target_core_base.h stays as is with all target-wide data stuctures and defines
 - target_core_backend.h contains the whole interface to I/O backends
 - target_core_fabric.h contains the whole interface to fabric modules

Except for those only the various configfs macro headers stay around.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14 11:26:05 +00:00
Christoph Hellwig e26d99aed4 target: reshuffle headers
Create a new headers, drivers/target/target_core_internal.h that is supposed
to hold all target_core-internal prototypes.  Move all non-exported includes
from include/target to it, and merge the smaller prototype-only includes
inside drivers/target into it as well.  Mark functions that were found to
not be called outside their implementation file static.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14 08:51:12 +00:00
Jörn Engel 5c73b678f7 target: remove unused struct fields
Some are never used, some are set but never read, dev_hoq_count is
incremented and decremented, but never read.

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06 06:00:56 +00:00
Nicholas Bellinger 03e98c9eb9 target: Address legacy PYX_TRANSPORT_* return code breakage
This patch removes legacy usage of PYX_TRANSPORT_* return codes in a number
of locations and addresses cases where transport_generic_request_failure()
was returning the incorrect sense upon CHECK_CONDITION status after the
v3.1 converson to use errno return codes.

This includes the conversion of transport_generic_request_failure() to
process cmd->scsi_sense_reason and handle extra TCM_RESERVATION_CONFLICT
before calling transport_send_check_condition_and_sense() to queue up
response status.  It also drops PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES legacy
usgae, and returns TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE w/ a response
for these cases.

transport_generic_allocate_tasks(), transport_generic_new_cmd(), backend
SCF_SCSI_DATA_SG_IO_CDB ->do_task(), and emulated ->execute_task() have
all been updated to set se_cmd->scsi_sense_reason and return errno codes
universally upon failure.  This includes cmd->scsi_sense_reason assignment
in target_core_alua.c, target_core_pr.c and target_core_cdb.c emulation code.

Finally it updates fabric modules to remove the legacy usage, and for
TFO->new_cmd_map() callers forwards return values outside of fabric code.
iscsi-target has also been updated to remove a handful of special cases
related to the cleanup and signaling QUEUE_FULL handling w/ ft_write_pending()

(v2: Drop extra SCF_SCSI_CDB_EXCEPTION check during failure from
     transport_generic_new_cmd, and re-add missing task->task_error_status
     assignment in transport_complete_task)

Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06 06:00:49 +00:00
Linus Torvalds 32aaeffbd4 Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include <linux/module.h>
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include <linux/module.h>
  net: sch_generic remove redundant use of <linux/module.h>
  net: inet_timewait_sock doesnt need <linux/module.h>
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h
2011-11-06 19:44:47 -08:00
Christoph Hellwig d29a5b6acc target: remove SCF_EMULATE_CDB_ASYNC
All ->execute_task instances now need to complete the I/O explicitly,
which can either happen synchronously or asynchronously.

Note that a lot of the CDB emulations appear to return success even if
some lowlevel operations failed.  Given that this is an existing issue
this patch doesn't change that fact.

(nab: Adding missing switch breaks in PR-IN + PR_OUT)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-04 10:43:35 +00:00
Christoph Hellwig e76a35d6c8 target: pass the se_task to the CDB emulation callback
We want to be able to handle all CDBs through it and remove hacks like
always using the first task in a CDB in target_report_luns.

Also rename the callback to ->execute_task to better describe its use.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-04 08:00:17 +00:00
Paul Gortmaker c53181af83 drivers/target: Add export.h to files as required.
So that they have access to EXPORT_SYMBOL variants and THIS_MODULE.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:58 -04:00
Nicholas Bellinger 6b20fa9aaf target: Fix REPORT TARGET PORT GROUPS handling with small allocation length
This patch fixes a bug with the handling of REPORT TARGET PORT GROUPS
containing a smaller allocation length than the payload requires causing
memory writes beyond the end of the buffer.  This patch checks for the
minimum 4 byte length for the response payload length, and also checks
upon each loop of T10_ALUA(su_dev)->tg_pt_gps_list to ensure the Target
port group and Target port descriptor list is able to fit into the
remaining allocation length.

If the response payload exceeds the allocation length length, then rd_len
is still increments to indicate to the initiator that the payload has
been truncated.

Reported-by: Roland Dreier <roland@purestorage.com>
Cc: stable@kernel.org
Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>
2011-10-24 03:21:19 +00:00
Jesper Juhl 9375b1bfd2 target: Remove unneeded version.h includes
It was pointed out by 'make versioncheck' that some includes of
linux/version.h are not needed in drivers/target/.
This patch removes them.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-10-11 04:10:19 +00:00
Andy Grover 6708bb27bb target: Follow up core updates from AGrover and HCH (round 4)
This patch contains the squashed version of forth round series cleanups
from Andy and Christoph following the post heavy lifting in the preceeding:
'Eliminate usage of struct se_mem' and 'Make all control CDBs scatter-gather'
changes.  This also includes a conversion of target core and the v3.0
mainline fabric modules (loopback and tcm_fc) to use pr_debug and the
CONFIG_DYNAMIC_DEBUG infrastructure!

These have been squashed into this third and final round for v3.1.

target: Remove ifdeffed code in t_g_process_write
target: Remove direct ramdisk code
target: Rename task_sg_num to task_sg_nents
target: Remove custom debug macros for pr_debug. Use pr_err().
target: Remove custom debug macros in mainline fabrics
target: Set WSNZ=1 in block limits VPD. Abort if WRITE_SAME sectors = 0
target: Remove transport do_se_mem_map callback
target: Further simplify transport_free_pages
target: Redo task allocation return value handling
target: Remove extra parentheses
target: change alloc_task call to take *cdb, not *cmd

(nab: Fix bogus struct file assignments in fd_do_readv and fd_do_writev)

Signed-off-by: Andy Grover <agrover@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22 09:37:48 +00:00
Andy Grover 05d1c7c0d0 target: Make all control CDBs scatter-gather
Previously, some control CDBs did not allocate memory in pages for their
data buffer, but just did a kmalloc. This patch makes all cdbs allocate
pages.

This has the benefit of streamlining some paths that had to behave
differently when we used two allocation methods. The downside is that
all accesses to the data buffer need to kmap it before use, and need to
handle data in page-sized chunks if more than a page is needed for a given
command's data buffer.

Finally, note that cdbs with no data buffers are handled a little
differently. Before, SCSI_NON_DATA_CDBs would not call get_mem at all
(they'd be in the final else in transport_allocate_resources) but now
these will make it into generic_get_mem, but just not allocate any
buffers.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22 09:37:48 +00:00
Andy Grover a1d8b49abd target: Updates from AGrover and HCH (round 3)
This patch contains a squashed version of third round series cleanups,
improvements ,and simplfications from Andy and Christoph ahead of the
heavy lifting between round 3 -> 4 for the target core SGL conversion.

This include cleanups to the main target I/O path and other miscellaneous
updates.

target: Replace custom sg<->buf functions with lib funcs
target: Simplify sector limiting code
target: get_cdb should never return NULL
target: Simplify transport_memcpy_se_mem_read_contig
target: Use assignment rather than increment for t_task_cdbs
target: Don't pass dma_size to generic_get_mem
target: Pass sg with type scatterlist in transport_map_sg_to_mem
target: Move task_sg_num next to task_sg in struct se_task
target: inline struct se_transport_task into struct se_cmd
target: Change name & semantics of transport_get_sectors()
target: Remove unused members of se_cmd
target: Rename se_cmd.t_task_cdbs to t_task_list_num
target: Fix some spelling
target: Remove unused var from transport_generic_do_tmr
target: map_sg_to_mem: return sg_count in return value
target/pscsi: Use min_t for sector limits
target/pscsi: Unused param for pscsi_get_bio()
target: Rename get_cdb_count to allocate_tasks
target: Make transport_generic_new_cmd() available for iscsi-target
target: Remove fabric callback to allocate iovecs
target: Fix transport_generic_new_cmd WRITE comment

(hch: Use __GFP_ZERO usage for alloc_pages() usage)

Signed-off-by: Andy Grover <agrover@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22 09:37:44 +00:00
Andy Grover 5951146dea target: More core cleanups from AGrover (round 2)
This patch contains the squashed version of second round of target core
cleanups and simplifications and Andy and Co.   It also contains a handful
of fixes to address bugs the original series and other minor cleanups.

Here is the condensed shortlog:

target: Remove unneeded casts to void*
target: Rename get_lun_for_{cmd,tmr} to lookup_{cmd,tmr}_lun
target: Make t_task a member of se_cmd, not a pointer
target: Handle functions returning "-2"
target: Use cmd->se_dev over cmd->se_lun->lun_se_dev
target: Embed qr in struct se_cmd
target: Replace embedded struct se_queue_req with a list_head
target: Rename list_heads that are nodes in struct se_cmd to "*_node"
target: Fold transport_device_setup_cmd() into lookup_{tmr,cmd}_lun()
target: Make t_mem_list and t_mem_list_bidi members of t_task
target: Add comment & cleanup transport_map_sg_to_mem()
target: Remove unneeded checks in transport_free_pages()

(Roland: Fix se_queue_req removal leftovers OOPs)
(nab: Fix transport_lookup_tmr_lun failure case)
(nab: Fix list_empty(&cmd->t_task.t_mem_bidi_list) inversion bugs)

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22 09:37:43 +00:00
Andy Grover e3d6f909ed target: Core cleanups from AGrover (round 1)
This patch contains the squashed version of a number of cleanups and
minor fixes from Andy's initial series (round 1) for target core this
past spring.  The condensed log looks like:

target: use errno values instead of returning -1 for everything
target: Rename transport_calc_sg_num to transport_init_task_sg
target: Fix leak in error path in transport_init_task_sg
target/pscsi: Remove pscsi_get_sh() usage
target: Make two runtime checks into WARN_ONs
target: Remove hba queue depth and convert to spin_lock_irq usage
target: dev->dev_status_queue_obj is unused
target: Make struct se_queue_req.cmd type struct se_cmd *
target: Remove __transport_get_qr_from_queue()
target: Rename se_dev->g_se_dev_list to se_dev_node
target: Remove struct se_global
target: Simplify scsi mib index table code
target: Make dev_queue_obj a member of se_device instead of a pointer
target: remove extraneous returns at end of void functions
target: Ensure transport_dump_vpd_ident_type returns null-terminated str
target: Function pointers don't need to use '&' to be assigned
target: Fix comment in __transport_execute_tasks()
target: Misc style cleanups
target: rename struct pr_reservation_template to pr_reservation
target: Remove #defines that just perform indirection
target: Inline transport_get_task_from_execute_queue()
target: Minor header comment fixes

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22 09:37:43 +00:00
Jiri Kosina 07f9479a40 Merge branch 'master' into for-next
Fast-forwarded to current state of Linus' tree as there are patches to be
applied for files that didn't exist on the old branch.
2011-04-26 10:22:59 +02:00
Justin P. Mattock 6eab04a876 treewide: remove extra semicolons
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-10 17:01:05 +02:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Nicholas Bellinger c66ac9db8d [SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:

High-performance, non-blocking, multithreaded architecture with SIMD
support.

Advanced SCSI feature set:

    * Persistent Reservations (PRs)
    * Asymmetric Logical Unit Assignment (ALUA)
    * Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
    * Full Error Recovery (ERL=0,1,2)
    * Active/active task migration and session continuation (ERL=2)
    * Thin LUN provisioning (UNMAP and WRITE_SAMExx)

Multiprotocol target plugins

Storage media independence:

    * Virtualization of all storage media; transparent mapping of IO to LUNs
    * No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
    * Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.

Standards compliance:

    * Full compliance with IETF (RFC 3720)
    * Full implementation of SPC-4 PRs and ALUA

Significant code cleanups done by Christoph Hellwig.

[jejb: fix up for new block bdev exclusive interface. Minor fixes from
 Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-14 10:12:29 -06:00