Commit Graph

16336 Commits

Author SHA1 Message Date
Mark Brown 6234eabf84 Merge remote-tracking branch 'asoc/topic/adsp' into asoc-next 2013-08-22 14:28:25 +01:00
Mark Brown ece59528fa Merge remote-tracking branch 'asoc/topic/ads711x' into asoc-next 2013-08-22 14:28:24 +01:00
Mark Brown a9bd18201c Merge remote-tracking branch 'asoc/topic/adav80x' into asoc-next 2013-08-22 14:28:24 +01:00
Mark Brown e303c42da9 Merge remote-tracking branch 'asoc/topic/adau1701' into asoc-next 2013-08-22 14:28:23 +01:00
Mark Brown 042c325a5a Merge remote-tracking branch 'asoc/topic/ad73311' into asoc-next 2013-08-22 14:28:23 +01:00
Mark Brown f14c6f97c2 Merge remote-tracking branch 'asoc/topic/ad1980' into asoc-next 2013-08-22 14:28:22 +01:00
Mark Brown dfd18caaf6 Merge remote-tracking branch 'asoc/topic/ac97' into asoc-next 2013-08-22 14:28:22 +01:00
Mark Brown 10c0d7a9f9 Merge remote-tracking branch 'asoc/fix/wm8960' into asoc-linus 2013-08-22 14:28:21 +01:00
Tushar Behera 06b10ff913 ASoC: samsung: Fix build error with dma function rename
commit 85ff3c29d7 ("ASoC: samsung: Rename DMA platform registration
functions") renames the DMA registration functions. Fix the places where
it was left out.

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-22 14:28:00 +01:00
Michael Grzeschik f037708654 ASoC: fsl: disable ssi irq for imx
We have to disable the ssi irq, as it is not safe for all platforms to
write back into the status register. It also runs into non-linefetch
aborts.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-22 11:11:20 +01:00
Michael Grzeschik 9b443e3d89 ASoC: fsl-ssi: imx-pcm-fiq bugfix
imx-pcm-fiq is checking for TE RE bits, so enable them only if
necessary.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-22 11:10:25 +01:00
Steffen Trumtrar f8fdf5375e ASoC: fsl-ssi: add SSIEN errata work around
The chip errata for the i.MX35, Rev.2 has the following errata:

ENGcm06222: SSI:Transmission does not take place in bit length early frame sync
	    configuration

The workaround states, that TX_EN and SSI_EN bits should be set in the same
register write. As the next errata in the document (ENGcm06532) says to always
write RX_EN and TX_EN in the same register write in network mode.

Therefore include the whole write to
	CCSR_SSI_SCR_TE and CCSR_SSI_SCR_RE
into the write to
	CCSR_SSI_SCR_SSIEN

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-22 11:09:52 +01:00
Markus Pargmann cd7f0295aa ASoC: fsl-ssi: ac97-slave support
This patch adds ac97-slave support.

For ac97, the registers have to be setup earlier than for other ssi
modes because there is some communication with the external device
before streaming. So this patch introduces a fsl_ssi_setup function to
setup the registers for different ssi operation modes seperately.

This patch was tested with imx27-pca100.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-22 11:09:10 +01:00
Mark Brown 64393c6e64 Merge remote-tracking branch 'asoc/topic/ac97' into asoc-fsl 2013-08-22 11:09:03 +01:00
Takashi Iwai e58a244ff9 ALSA: rme96: Check the return value of pci_enable_device() in resume callback
Fixing warning message:
  sound/pci/rme96.c: In function ‘snd_rme96_resume’:
  sound/pci/rme96.c:2418:19: warning: ignoring return value of ‘pci_enable_device’, declared with attribute warn_unused_result [-Wunused-result]

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-22 12:04:47 +02:00
Kailang Yang cd217a6395 ALSA: hda - Add workarounds for pop-noise on Chromebook with ALC283
The headphone automute on this machine triggers annoying pop noises.
It seems that only the first DAC can be used, the secondary DAC always
results in this problem.  This patch disables the secondary DAC with
a few additional workarounds.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-22 11:55:33 +02:00
Kailang Yang 2af02be71a ALSA: hda - Fix ALC283 headphone pop-noise better
Fixed ALC283 D3 to D0 and D0 to D3 Headphone pop noise.
The previous fix [c5177c86: ALSA: hda - Fix the noise after suspend on
ALC283 codec] doesn't work sufficiently for some laptops.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-22 11:54:58 +02:00
Knut Petersen 528ba522e1 ALSA: rme96: Add PM support v3
Without proper power management handling, the first use
of a Digi96/8 anytime after a suspend / resume cycle will
start playback with distortions.

v3: Abort if vmalloc() of suspend buffers fail, but do not
leak memory in that case.

[fixed wrong memory leak fix again -- tiwai]

Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-22 11:54:57 +02:00
Nicolin Chen a2388a498a ASoC: fsl: Add S/PDIF CPU DAI driver
This patch implements a device-tree-only CPU DAI driver for Freescale
S/PDIF controller that supports stereo playback and record feature.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-22 10:45:22 +01:00
Sachin Kamat a1ce31388d ASoC: pxa: Remove duplicate inclusion of dmaengine.h
dmaengine.h header file was included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-22 10:43:49 +01:00
Julia Lawall 673c24e957 ASoC: omap: simplify platform_get_resource_byname/devm_ioremap_resource
Remove unneeded error handling on the result of a call to
platform_get_resource_byname when the value is passed to devm_ioremap_resource.

In the case of omap-dmic.c, the error-handling code of
devm_ioremap_resource is also corrected to include releasing the clock.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression pdev,res,e,e1;
expression ret != 0;
identifier l;
@@

  res = platform_get_resource_byname(...);
- if (res == NULL) { ... \(goto l;\|return ret;\) }
  e = devm_ioremap_resource(e1, res);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-20 11:50:58 +01:00
Fabio Estevam 0783e64898 ASoC: fsl: fsl_ssi: Fix the order of resources removal
In fsl_ssi_remove() we need to remove the resources in the opposite order that
they were acquired in probe.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-20 11:47:04 +01:00
Markus Pargmann 741a509f34 ASoC: core: Generic ac97 link reset functions
This patch adds generic ac97 reset functions using pincontrol and gpio
parsed from devicetree.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-20 11:02:00 +01:00
Mark Brown 85ff3c29d7 ASoC: samsung: Rename DMA platform registration functions
The current naming with a simple asoc_ prefix is too generic for use in
multiplatform kernels.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
2013-08-20 10:36:33 +01:00
Mark Brown 37e6071787 ASoC: samsung: Check to see if we managed to allocate a channel
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
2013-08-20 10:36:00 +01:00
Adrian Knoth 1568b88022 ALSA: hdspm - Use enums in hdspm_tco_ltc_frames()
This patch doesn't change functionality, it only improves readability
and fixes a copy&paste error in a comment.

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-19 20:09:03 +02:00
Adrian Knoth 17d2f00836 ALSA: hdspm - Fix default value in SNDRV_HDSPM_IOCTL_GET_LTC
Use enum hdspm_ltc_format's fps_30 (corresponds to 4) instead of 30,
Other case branches return 1, 2 or 3 respectively, so 30 obviously is
wrong.

Since SNDRV_HDSPM_IOCTL_GET_LTC had never been working due to a
copy&paste error in hdspm.h, this change doesn't break userspace.

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-19 20:08:57 +02:00
Takashi Iwai d3d3835ce9 ALSA: hda - Add inverted digital mic fixup for Acer Aspire One
Yet another entry, just use the existing fixup for this machine, too.

Reported-by: "Nathanael D. Noblet" <nathanael@gnat.ca>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-19 20:07:28 +02:00
Tim Gardner 74d779ab7c ALSA: pcm: Use snd_printd_ratelimit()
The use of snd_printd_ratelimit() supresses superfluous output from
printk_ratelimit() when CONFIG_SND_DEBUG is not defined. For example,

[   43.753692] snd_pcm_update_hw_ptr0: 26 callbacks suppressed
[   48.822131] snd_pcm_update_hw_ptr0: 25 callbacks suppressed
[   53.894953] snd_pcm_update_hw_ptr0: 25 callbacks suppressed
[   58.997761] snd_pcm_update_hw_ptr0: 25 callbacks suppressed
[   64.100952] snd_pcm_update_hw_ptr0: 25 callbacks suppressed

fills the log even when no debug output is actually produced.

Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Yacine Belkadi <yacine.belkadi.1@gmail.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-19 15:48:48 +02:00
David Henningsson c841ad2a9b ALSA: hda - Try to allow haswell HDMI audio even without powerwell
If compiled without CONFIG_SND_HDA_I915, the audio driver cannot
request power well. However, if the power well is on for other
reasons, maybe audio can still work. Therefore, do not skip the
card completely if compiled without CONFIG_SND_HDA_I915.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-19 15:46:17 +02:00
David Henningsson cd5302c0d4 ALSA: hda - Limit internal mic boost for a few more Thinkpad machines
The higher mic boosts (on internal mic) are so noisy they're unusable
in practice.

BugLink: https://bugs.launchpad.net/bugs/1213820
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-19 15:45:51 +02:00
Mark Brown 3c1c32d376 ASoC: imx: Add MODULE_LICENSE to DMA drivers
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-19 14:31:02 +01:00
Mark Brown fc60614865 ASoC: spdif: Remove duplicate const
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-19 12:20:53 +01:00
Mark Brown 2f6e3ba0e0 ASoC: spdif: Add stub DAPM widgets for Rx
Ensure that the driver continues to work with mandatory DAPM.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-19 12:20:53 +01:00
Mark Brown 5195ca4902 ASoC: bt-sco: Provide stub DAPM integration
Ensure continued operation with DAPM being mandatory.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-19 12:20:26 +01:00
Mark Brown b9dff9c3d2 ASoC: bt-sco: Add generic compatible string
Provide a common compatible string for device trees to list as a fallback
for simplicity. We don't currently have a binding document but let's not
fix that right now...

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-19 12:20:25 +01:00
Mark Brown c34e51b127 ASoC: hdmi: Provide stub DAPM integration
Ensure continued operation with DAPM being mandatory.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-19 12:19:02 +01:00
Mark Brown d2a369cb53 ASoC: ac97: Provide stub DAPM integration
Ensure continued operation with DAPM being mandatory.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-19 12:18:40 +01:00
Mark Brown c5efb38a13 ASoC: wm8997: Add inputs for noise and mic mixers
The noise and mic mixer inputs were not connected, do so.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-19 11:12:09 +01:00
Mark Brown 66e7aa22c7 ASoC: wm5110: Add inputs for noise and mic mixers
The noise and mic mixer inputs were not connected, do so.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-19 11:12:09 +01:00
Mark Brown 3efd8a6f1a ASoC: wm5102: Add inputs for noise and mic mixers
The noise and mic mixer inputs were not connected, do so.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-19 11:12:08 +01:00
Mark Brown 226059e1cd ASoC: wm8782: Add DAPM support
In order to make the device easier to hook up to external components in
system designs and ensure operation when DAPM support becomes mandatory
add DAPM support.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-18 18:39:49 +01:00
Mark Brown 72a061f763 ASoC: wm8727: Add DAPM support
In order to make the device easier to hook up to external components in
system designs and ensure operation when DAPM support becomes mandatory
add DAPM support.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-18 18:39:27 +01:00
Mark Brown 782fbaba36 ASoC: cs4270: Add DAPM support
This makes it possible to hook the device into a more complex board and
ensures it will continue to work with non-DAPM support removed from the
core.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-18 18:27:40 +01:00
Mark Brown e29deb4818 ASoC: wl1273: Add stub DAPM support
In order to ensure that the device continues to work with DAPM support
being mandatory provide stub DAPM widgets and routes.

Note that the public information on the device appears to make no
mention of the FM support the driver appears to have.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-18 18:27:08 +01:00
Mark Brown 4fc932c6d8 ASoC: pcm3008: Manage DAC and ADC power with DAPM
Rather than leaving the DAC and ADC active whenever the system is running
manage their power with DAPM.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-18 16:40:01 +01:00
Mark Brown faaf36f216 ASoC: pcm3008: Add DAPM support
Make it possible to connect external devices to the CODEC and ensure
continued operation with non-DAPM support removed from the core.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-18 16:40:00 +01:00
Mark Brown ea67afc3fd ASoC: pcm3008: Use gpio_set_value_cansleep()
We don't set the GPIO values from atomic context so support GPIOs that
can't be controlled from atomic context.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-18 16:40:00 +01:00
Mike Dyer 85fa532b6e ASoC: wm8960: Fix PLL register writes
Bit 9 of PLL2,3 and 4 is reserved as '0'. The 24bit fractional part
should be split across each register in 8bit chunks.

Signed-off-by: Mike Dyer <mike.dyer@md-soft.co.uk>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
2013-08-18 16:30:26 +01:00
Fabio Estevam 70a39b930f ASoC: fsl: Drop SND_SOC_FSL_UTILS from i.mx machine code
SND_SOC_FSL_UTILS is only used by PowerPC machines, so let's drop it in the
i.mx case.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-18 16:28:47 +01:00
Mark Brown ac0b82b178 ASoC: si476x: Add DAPM support
This ensures the driver continues to work with DAPM mandatory and makes
it easier to connect the device up to other components in the subsystem.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com>
2013-08-18 16:27:48 +01:00
Ondrej Zary 338c658a64 [media] tea575x: Move from sound to media
Move tea575x from sound/i2c/other to drivers/media/radio
Includes Kconfig changes by Hans Verkuil.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-18 08:09:59 -03:00
Ondrej Zary 59b564599b [media] tea575x: Move header from sound to media
Move include/sound/tea575x-tuner.h to include/media/tea575x.h and update files that include it.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-18 08:08:05 -03:00
David Henningsson aaedfb4761 ALSA: hda - Fix the order of a quirk table (janitorial)
This just cleans up the table, no functional changes.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-16 14:50:00 +02:00
David Henningsson a4a9e08267 ALSA: hda - Fix internal mic boost on three Thinkpad machines
The internal mic boost is so noisy on boosts 2 and 3 so they are
unusable in practice.

BugLink: https://bugs.launchpad.net/bugs/1213055
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-16 14:49:50 +02:00
Mark Brown 4a11bc2fdd ASoC: tlv320aic26: Add basic DAPM support
Provide external widgets for the CODEC to ensure the device continues to
function with DAPM mandatory and to make it easier to hook the device up
to other components.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-16 12:32:44 +01:00
Mark Brown c21bb9b1b7 ASoC: tlv320aic26: Remove noisy print
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-16 12:32:43 +01:00
Mark Brown 12201398fc ASoC: tlv320aic26: Remove direct use of internal I/O functions
Use the core to do I/O rather than directly calling the driver operations
in order to support further refactoring.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-16 12:32:43 +01:00
Markus Pargmann 74b77b1510 ASoC: imx-audmux: Move definitions to dt-bindings
Move imx-audmux macro definitions to include/dt-bindings, so they can be
used for devicetree.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-16 11:05:17 +01:00
Takashi Iwai 1801928e0f ALSA: hda - Add a fixup for Gateway LT27
Gateway LT27 needs a fixup for the inverted digital mic.

Reported-by: "Nathanael D. Noblet" <nathanael@gnat.ca>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-16 08:17:05 +02:00
Takashi Iwai f85a6597a6 ASoC: Fixes for v3.11
A few driver specific fixes here plus one core fix for a memory
 corruption issue in DAPM initialisation which could lead to crashes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSDLDiAAoJELSic+t+oim9K0UP/3JXJsprPlUQ7r4OxoX/eYcq
 AMH3n84uTY1JqP2crTc8FwVtHyqxyj3nnhyPDZYtk9bfuAVpVohdSTuD8Ai+Cv8g
 R46cGqvYXnURl0K8lKlq9zaDXNca0ijbmj0ljQg+gON/Cl8HLDPZ94GgwbzyrBU4
 boGgam7WRJVhAl4Mt6S5wq6HoG6G+StJtjL7/P9LkQGx8USl8/TUZwJw43NnEmNP
 qJRwjY5Zk0jJHRzKFzqTtEmNcy6/zugjK5K6sFLqEwUxmoW4CeSD6eQ21GduQ2Gt
 w1dImWgBO3h0+BLGxy2ukTuTppyfUscliM6ohnZNdWoK5dlt55FXraS9ljQSgsEZ
 xQoXe3yMx1oq/kJriuKmDLD5LtLnidsuhsSEeSjNoq4c6Jt9hEkncYWMEIm2LTpT
 t+UxwqDtw4ZCVAHSX18hPsGq+QG2skxEca/JZ6T31CpmAf1lNA2ddH82XkQB9atK
 REz8+Nt+agBDEuitSmdz5mRuoDmngUm8SSrv5HImtvdVWMr52BKUtzUkjPvoHy/4
 1geIRond5ZLmOxZeo4LTEKC1FIQ9LVKmAoOyJehSAHWno8nQ6jG0gxX73eWCaAg1
 ImxyM2NB4hEm/nQ6r9rddhsrU8YTOrXRcQDw0YhwWMRlIu4KBPSaDgTOZCavPkHO
 iI+8rNQrgOQj/hwcW8IV
 =WWSS
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.11

A few driver specific fixes here plus one core fix for a memory
corruption issue in DAPM initialisation which could lead to crashes.
2013-08-15 20:43:46 +02:00
Mark Brown 2aca78915e Merge branch 'topic/dma' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-omap 2013-08-15 18:30:29 +01:00
Daniel Mack 903eb3187e ALSA: core: allow SND_DMAENGINE_PCM use from modules
When users of SND_DMAENGINE_PCM are built as module, the config symbol
SND_DMAENGINE_PCM must be tristate, otherwise the linker will fail.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-15 18:28:42 +01:00
Mark Brown 44ffb69ec6 Merge remote-tracking branch 'asoc/fix/tegra' into asoc-linus 2013-08-15 11:37:54 +01:00
Mark Brown f6938bb360 Merge remote-tracking branch 'asoc/fix/sgtl5000' into asoc-linus 2013-08-15 11:37:53 +01:00
Mark Brown 14388a6934 Merge remote-tracking branch 'asoc/fix/dapm' into asoc-linus 2013-08-15 11:37:53 +01:00
Mark Brown c200d88816 Merge remote-tracking branch 'asoc/fix/cs42l52' into asoc-linus 2013-08-15 11:37:52 +01:00
Mark Brown 743c5bb898 Merge branch 'topic/dma' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-omap
Conflicts:
	sound/soc/omap/Kconfig
2013-08-15 11:37:38 +01:00
Mark Brown b9281f99e3 ASoC: pcm1681: Add DAPM support
Provide DAPM for the device, ensuring operation with DAPM required by the
core and making it easier to hook up external hardware to it.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-15 11:35:09 +01:00
Mark Brown e7a5cb4223 ASoC: pcm1792a: Add DAPM support
Provide DAPM for the device, ensuring operation with DAPM required by the
core and making it easier to hook up external hardware to it.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-15 11:33:15 +01:00
Mark Brown 5332e1d26f ASoC: pcm1792a: Remove empty capture DAI stub
These intialisations are just what will be done for static data anyway so
remove them.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-15 11:33:14 +01:00
Daniel Mack c529ca4ab9 ASoC: pxa: add DT bindings for pxa2xx-pcm
The bindings do not carry any resources, as the module only registers
the ASoC platform driver.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-15 11:29:07 +01:00
Daniel Mack a671468d33 ASoC: pxa: pxa-ssp: set dma filter data from startup hook
With the new dmaengine implementation, the filter_data parameter has
to be set earlier, from pxa_ssp_startup().

Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-15 11:29:07 +01:00
Daniel Mack d65a14587a ASoC: pxa: use snd_dmaengine_dai_dma_data
Use snd_dmaengine_dai_dma_data for passing the dma parameters from
clients to the pxa pcm lib. This does no functional change, it's just an
intermedia step to migrate the pxa bits over to dmaengine.

The calculation of dcmd is a transition hack which will be removed again
in a later patch. It's just there to make the transition more readable.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-15 11:29:07 +01:00
Daniel Mack 2023c90c3a ASoC: pxa: pxa-ssp: add DT bindings
The pxa ssp DAI acts as a user of a pxa ssp port, and needs an
appropriate 'port' phandle in DT to reference the upstream.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-15 11:29:07 +01:00
Mark Brown 4210606b19 Merge branch 'topic/dma' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-pxa 2013-08-15 11:19:52 +01:00
Daniel Mack b7ae6f31d8 ALSA: move dmaengine implementation from ASoC to ALSA core
For the PXA DMA rework, we need the generic dmaengine implementation
that currently lives in sound/soc for standalone (non-ASoC) AC'97
support.

Move it to sound/core, and rename the Kconfig symbol.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-15 11:18:09 +01:00
Julia Lawall b434500642 ASoC: tegra20-ac97: simplify use of devm_ioremap_resource
Remove unneeded error handling on the result of a call to
platform_get_resource when the value is passed to devm_ioremap_resource.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression pdev,res,n,e,e1;
expression ret != 0;
identifier l;
@@

- res = platform_get_resource(pdev, IORESOURCE_MEM, n);
  ... when != res
- if (res == NULL) { ... \(goto l;\|return ret;\) }
  ... when != res
+ res = platform_get_resource(pdev, IORESOURCE_MEM, n);
  e = devm_ioremap_resource(e1, res);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-15 11:09:10 +01:00
Stephen Warren 7ac0da8cd3 ASoC: tegra: support a Mic Jack in the Tegra+RT5640 machine driver
Add a Mic Jack widget to the Tegra+RT5640 machine driver, and document
this in the DT binding. This enables the DT to include the Mic Jack in
the audio routing table, and hence enables capture of audio, in addition
to the previously-working playback.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-15 11:08:30 +01:00
Stephen Warren c90c0d7a96 ASoC: tegra: fix Tegra30 I2S capture parameter setup
The Tegra30 I2S driver was writing the AHUB interface parameters to the
playback path register rather than the capture path register. This
caused the capture parameters not to be configured at all, so if
capturing using non-HW-default parameters (e.g. 16-bit stereo rather
than 8-bit mono) the audio would be corrupted.

With this fixed, audio capture from an analog microphone works correctly
on the Cardhu board.

Cc: stable@vger.kernel.org
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-15 11:07:53 +01:00
Julia Lawall 4d8cfa4642 ASoC: mioa701_wm9713: Remove definition of ARRAY_AND_SIZE()
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-14 20:09:38 +01:00
Ma Haijun c324aac01b ASoC: wm8960: Fix ADC volume bits
Signed-off-by: Ma Haijun <mahaijuns@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-14 19:16:29 +01:00
Julia Lawall 64efc5a0f2 ASoC: samsung-ac97: simplify use of devm_ioremap_resource
Remove unneeded error handling on the result of a call to
platform_get_resource when the value is passed to devm_ioremap_resource.

Move the call to platform_get_resource adjacent to the call to
devm_ioremap_resource to make the connection between them more clear.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression pdev,res,n,e,e1;
expression ret != 0;
identifier l;
@@

- res = platform_get_resource(pdev, IORESOURCE_MEM, n);
  ... when != res
- if (res == NULL) { ... \(goto l;\|return ret;\) }
  ... when != res
+ res = platform_get_resource(pdev, IORESOURCE_MEM, n);
  e = devm_ioremap_resource(e1, res);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-14 19:14:36 +01:00
Knut Petersen b892ca1c9f ALSA: rme96: Add pcm stream synchronization
The hardware does support synchronized start/pause/stop of pcm streams,
so there is no reason not to add that feature after more than ten years.

Some minor coding style / white space fixes in the surroundings of the
changes.

Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-14 17:02:36 +02:00
Padmavathi Venna 4ca0c0d478 ASoC: Samsung: I2S: Modify the I2S driver to support I2S on Exynos5420
Exynos5420 added support for I2S TDM mode. For this, there are some
register changes in the I2S controller. This patch adds the relevant
register changes to support I2S in normal mode. This patch adds a
quirk for TDM mode and if TDM mode is present all the relevent changes
will be applied.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-13 13:44:09 +01:00
Padmavathi Venna 7da493e922 ASoC: Samsung: I2S: Add quirks as driver data in I2S
Samsung has different versions of I2S introduced in different
platforms. Each version has some new support added for multichannel,
secondary fifo, s/w reset control and internal mux for rclk src clk.
Each newly added change has a quirk. So this patch adds all the
required quirks as driver data and based on compatible string from
dtsi fetches the quirks.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-13 13:44:06 +01:00
Mark Brown 5cf9da8aac ASoC: max9877: Add basic DAPM support
This does not fully map the power control available within the device
but it provides the hooks for routing signals through the device and
allows automatic management of the device low power mode.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-13 13:40:35 +01:00
Mark Brown d76a96174b ASoC: max9877: Convert to standard CODEC driver
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-13 13:40:34 +01:00
Mark Brown 997288e382 ASoC: max9877: Convert to use regmap API
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-13 13:40:33 +01:00
Mark Brown 4601736a6f ASoC: ak4554: Add DAPM support
This makes it possible to hook the device into a more complex board and
ensures it will continue to work with non-DAPM support removed from the
core.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-13 13:38:36 +01:00
Charles Keepax 40843aea5a ASoC: wm8997: Initial CODEC driver
The wm8997 is a compact, high-performance audio hub CODEC with SLIMbus
interfacing, for smartphones, tablets and other portable audio devices
based on the Arizona platform.

This patch adds the wm8997 CODEC driver.

[Fixed some interface churn from bitrot due to the patch not going via
the MFD tree as expected -- broonie]

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-13 11:31:56 +01:00
Mark Brown 69c2d346e8 ASoC: dapm: Ensure kcontrol list is initialised
Ensure that the recently added path kcontrol list is initialised otherwise
we may crash trying to delete routes that don't have kcontrols.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
2013-08-13 10:19:59 +01:00
Mark Brown 946d92a100 ASoC: dapm: Don't create routes when creating kcontrols
Attempting to create the route as part of adding a mux control causes us
to attempt to add the same route twice since we loop over all sources
for the mux after creating the control. Instead do the addition in the
callers.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
2013-08-13 10:19:57 +01:00
Mark Brown f2e537425a Merge remote-tracking branch 'asoc/fix/dapm' into asoc-dapm 2013-08-13 10:19:52 +01:00
Mark Brown 4bd9334312 Linux 3.11-rc5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJSCDSjAAoJEHm+PkMAQRiGDXMIAI7Loae0Oqb1eoeJkvjyZsBS
 OJDeeEcn+k58VbxVHyRdc7hGo4yI4tUZm172SpnOaM8sZ/ehPU7zBrwJK2lzX334
 /jAM3uvVPfxA2nu0I4paNpkED/NQ8NRRsYE1iTE8dzHXOH6dA3mgp5qfco50rQvx
 rvseXpME4KIAJEq4jnyFZF5+nuHiPueM9JftPmSSmJJ3/KY9kY1LESovyWd7ttg1
 jYSVPFal9J0E+tl2UQY5g9H16GqhhjYn+39Iei6Q5P4bL4ZubQgTRQTN9nyDc06Z
 ezQtGoqZ8kEz/2SyRlkda6PzjSEhgXlc8mCL5J7AW+dMhTHHx2IrosjiCA80kG8=
 =c0rK
 -----END PGP SIGNATURE-----

Merge tag 'v3.11-rc5' into asoc-dapm

Linux 3.11-rc5
2013-08-13 10:19:23 +01:00
Takashi Iwai e80c60f3cb ALSA: hda - Mute the right widget in auto_mute_via_amp mode
The current generic parser code assumes that always a pin widget
controls the mute for an output blindly although it might be a
different widget in the middle.  Instead of the fixed assumption,
check each parsed path and just pick up the right widget that has been
already defined as a mute control.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-13 09:11:04 +02:00
Takashi Iwai bc2eee29fc ALSA: hda - Allow auto_mute_via_amp on bind mute controls
The auto-mute using the amp currently works only for a single amp on a
pin.  Make it working also with HDA_CTL_BIND_MUTE type, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-13 09:10:37 +02:00
Maksim A. Boyko 140d37de62 ALSA: usb-audio: Fix invalid volume resolution for Logitech HD Webcam C525
Add the volume control quirk for avoiding the kernel warning
for the Logitech HD Webcam C525
as in the similar commit 36691e1be6
for the Logitech HD Webcam C310.

Reported-by: Maksim Boyko <maksim.a.boyko@gmail.com>
Tested-by: Maksim Boyko <maksim.a.boyko@gmail.com>
Cc: <stable@vger.kernel.org> # 3.10.5+
Signed-off-by: Maksim Boyko <maksim.a.boyko@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-12 14:55:20 +02:00
Charles Keepax e7edb2731b ASoC: arizona: Add widget<->mux route into mux route macro
The routes linking the widget and the input mux were being added
manually, rather than by the ARIZONA_MUX_ROUTES macro. This patchs adds
the routes to the macro.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-12 11:56:13 +01:00
Mark Brown dcf1439a49 ASoC: ak5386: Add DAPM support
This makes it possible to hook the device into a more complex board and
ensures it will continue to work with non-DAPM support removed from the
core.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-12 11:23:38 +01:00
Mark Brown a5db4d50fa ASoC: ak4104: Manage TXE using DAPM
Saves some code. We should also be able to manage the power up and reset
registers using DAPM but it's probably more trouble than it's worth in
mains powered systems.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-12 11:22:39 +01:00
Mark Brown 2e61926cb4 ASoC: ak4104: Add stub DAPM support
This makes it easer to integrate the device with other on-board components
and ensures correct operation following removal of support for non-DAPM
CODECs.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-12 11:22:39 +01:00
Mark Brown 9190aeb4ec ASoC: adau1701: Use gpio_set_value_cansleep()
The GPIO manipulation done by this driver is never in atomic context so
we can use gpio_set_value_cansleep() and support GPIOs that can't be set
from atomic context.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
2013-08-12 11:07:47 +01:00
Mark Brown 3d24cfe485 ASoC: compress: Use power efficient workqueue
There is no need for the power down work to be done on a per CPU workqueue
especially considering the fairly long delay before powerdown.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
2013-08-12 11:04:54 +01:00
Takashi Iwai f69910ddbd ALSA: hda - Fix missing mute controls for CX5051
We've added a fake mute control (setting the amp volume to zero) for
CX5051 at commit [3868137e: ALSA: hda - Add a fake mute feature], but
this feature was overlooked in the generic parser implementation.  Now
the driver lacks of mute controls on these codecs.

The fix is just to check both AC_AMPCAP_MUTE and AC_AMPCAP_MIN_MUTE
bits in each place checking the amp capabilities.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59001
Cc: <stable@vger.kernel.org> [v3.9+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-12 11:42:39 +02:00
Clemens Ladisch aa773bfe8f ALSA: usb-audio: fix automatic Roland/Yamaha MIDI detection
Commit aafe77cc45 (ALSA: usb-audio: add support for many Roland/Yamaha
devices) had several logic errors that prevented create_auto_midi_quirk
from enumerating any MIDI ports.

Reported-by: Keith A. Milner <maillist@superlative.org>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-12 11:42:28 +02:00
Torsten Schenk 4c2aee0032 ALSA: 6fire: make buffers DMA-able (midi)
Patch makes midi output buffer DMA-able by allocating it separately.

Signed-off-by: Torsten Schenk <torsten.schenk@zoho.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-12 11:42:28 +02:00
Torsten Schenk 5ece263f1d ALSA: 6fire: make buffers DMA-able (pcm)
Patch makes pcm buffers DMA-able by allocating each one separately.

Signed-off-by: Torsten Schenk <torsten.schenk@zoho.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-12 11:42:28 +02:00
Takashi Iwai db8a38e506 ALSA: hda - Add pinfix for LG LW25 laptop
Correct the pins for a line-in and a headphone on LG LW25 laptop with
ALC880 codec.  Other pins seem fine.

Reported-and-tested-by: Joonas Saarinen <jonskunator@gmail.com>
Cc: <stable@vger.kernel.org> [v3.9+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-12 11:04:17 +02:00
Julia Lawall 4edec9eaf4 sound/soc/pxa/mioa701_wm9713.c: Avoid using ARRAY_AND_SIZE(e) as a function argument
Replace ARRAY_AND_SIZE(e) in function argument position to avoid hiding the
arity of the called function.

The semantic match that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e,f;
@@

f(...,
- ARRAY_AND_SIZE(e)
+ e,ARRAY_SIZE(e)
  ,...)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-11 19:06:32 +01:00
Mark Brown 2e7fb942a3 ASoC: cs4271: Add DAPM support
This makes it possible to hook the device into a more complex board and
ensures it will continue to work with non-DAPM support removed from the
core.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Alexander Sverdlin <subaparts@yandex.ru>
2013-08-11 18:40:53 +01:00
Mark Brown bad268f350 ASoC: cs4271: Convert to table based control init
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Alexander Sverdlin <subaparts@yandex.ru>
2013-08-11 14:04:19 +01:00
Mark Brown 439fe8a7bb ASoC: max9768: Add DAPM support
This makes it possible to hook the device into a more complex board and
ensures it will continue to work with non-DAPM support removed from the
core.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-11 13:30:17 +01:00
Lars-Peter Clausen 9a953e6f27 ASoC: Use snd_soc_info_enum_double() for SOC_ENUM_EXT controls
snd_soc_info_enum_ext() and snd_soc_info_enum_double() are almost identical. The
only difference is that snd_soc_info_enum_double() is also able to handle stereo
controls. Using snd_soc_info_enum double() instead of snd_soc_info_enum_ext()
for the SOC_ENUM_EXT control's info callback allows us to remove
snd_soc_info_enum_ext().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-11 12:00:27 +01:00
Lars-Peter Clausen c77f872e66 ASoC: Remove unused snd_soc_info_volsw_ext()
The SOC_SINGLE_EXT control has been using snd_soc_info_volsw() for its info
callback since commit 1c433fb ("[ALSA] soc - 0.13 ASoC headers"). The
snd_soc_info_volsw_ext() function has been unused ever since then, so remove it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-11 12:00:26 +01:00
Markus Pargmann 9c0aeaa384 ASoC: imx-audmux: default configuration parser fixups
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-11 11:59:27 +01:00
Lars-Peter Clausen 34d2f1b6fe ASoC: Remove unused soc_pm_waitq
The soc_pm_waitq waitqueue has been around as long as the ASoC framework
existed, but has never been used so far, so remove it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-10 12:12:57 +01:00
Dan Carpenter f5cb0be917 sound: oss/dmabuf: remove an unneeded temporary variable
We don't actually use the "go" variable so it can be removed.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-09 12:38:33 +02:00
Sachin Kamat 74b45231b2 ASoC: s6105-ipcam: Fix incorrect placement of __initdata
__initdata should be placed between the variable name and equal
sign for the variable to be placed in the intended section.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-08 14:27:59 +01:00
Mark Brown 827d22f136 ASoC: ad73311: Add DAPM support
This makes it possible to hook up other devices in boards and is required
by removal of support for non-DAPM CODECs in the core.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
2013-08-08 14:24:30 +01:00
Mark Brown 16695971be ASoC: pcm1681: Staticise DAI driver
It is not exported so doesn't need to be in the global namespace and
sparse warns on this.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-08 12:35:23 +01:00
Andy Shevchenko 663819fb7d ALSA: don't push static constants on stack for %*ph
There is no need to pass constants via stack. The width may be explicitly
specified in the format.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-08 12:04:18 +02:00
Clemens Ladisch 57e6dae108 ALSA: usb-audio: do not trust too-big wMaxPacketSize values
The driver used to assume that the streaming endpoint's wMaxPacketSize
value would be an indication of how much data the endpoint expects or
sends, and compute the number of packets per URB using this value.

However, the Focusrite Scarlett 2i4 declares a value of 1024 bytes,
while only about 88 or 44 bytes are be actually used.  This discrepancy
would result in URBs with far too few packets, which would not work
correctly on the EHCI driver.

To get correct URBs, use wMaxPacketSize only as an upper limit on the
packet size.

Reported-by: James Stone <jamesmstone@gmail.com>
Tested-by: James Stone <jamesmstone@gmail.com>
Cc: <stable@vger.kernel.org> # 2.6.35+
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-08 11:37:34 +02:00
Mark Brown 45a14a8b50 ASoC: ads711x: Add DAPM support
This makes it easier to hook into boards and ensures the driver continues
to work with support for non-DAPM CODECs removed.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-07 19:18:08 +01:00
Jussi Kivilinna ddb6b5a964 ALSA: 6fire: fix DMA issues with URB transfer_buffer usage
Patch fixes 6fire not to use stack as URB transfer_buffer. URB buffers need to
be DMA-able, which stack is not. Furthermore, transfer_buffer should not be
allocated as part of larger device structure because DMA coherency issues and
patch fixes this issue too.

Cc: stable@vger.kernel.org
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Tested-by: Torsten Schenk <torsten.schenk@zoho.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-07 16:04:27 +02:00
Mark Brown 9e7e474c09 ASoC: ad1980: Provide stub DAPM support
Since non-DAPM devices are not going to be supported provide DAPM input
and output widgets and hook them up to the DAIs.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
2013-08-07 10:14:23 +01:00
Fabio Estevam 9f19de649f ASoC: imx-mc13783: Make SND_SOC_IMX_MC13783 visible again
Commit 02502da45 (ASoC: imx-mc13783: Depend on ARCH_ARM) introduced 'ARCH_ARM'
as a dependency for SND_SOC_IMX_MC13783, but this is a non-existent symbol.

This makes the selection of SND_SOC_IMX_MC13783 to be impossible.

Use the correct 'ARM' symbol instead.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06 23:57:06 +01:00
Brian Austin 8806d96db7 ASoC: cs42l52: Add new TLV for Beep Volume
CS42L52 Beep control uses 2dB scale from -56dB

Signed-off-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06 19:38:57 +01:00
Brian Austin e2c98a8bba ASoC: cs42l52: Reorder Min/Max and update to SX_TLV for Beep Volume
Beep Volume Min/Max was backwards.
Change to SOC_SONGLE_SX_TLV for correct volume representation

Signed-off-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@kernel.org
2013-08-06 19:38:19 +01:00
Nicolas Ferre fdbcb3cba5 ASoC: atmel: machine driver for at91sam9x5-wm8731 boards
Description of the Asoc machine driver for an at91sam9x5 based board
with a wm8731 audio DAC. Wm8731 is clocked by a crystal and used as a
master on the SSC/I2S interface. Its connections are a headphone jack
and an Line input jack.

[Richard: this is based on an old patch from Nicolas that I forward
ported and reworked to use only device tree]

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06 18:11:09 +01:00
Markus Pargmann 3a5e517bb2 ASoC: fsl-ssi: Use generic DMA bindings if possible
There may be some platforms using fsl-ssi that do not have a DMA driver
with generic DMA bindings. So this patch adds support for the generic
DMA bindings, while still accepting the old "fsl,dma-events" property if
"dmas" is not found.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06 17:59:29 +01:00
Markus Pargmann de623ece5b ASoC: fsl-ssi: Add support for imx-pcm-fiq
Add support for non-dma pcm for imx platforms with imx-pcm-fiq support.
Instead of imx-pcm-audio, in this case imx-pcm-fiq-audio device is added
and the SIER flags are set differently.

We need imx-pcm-fiq for some boards that use an incompatible codec.
imx-pcm-fiq handles those codecs differently and allows to operate with
them. DMA is not possible because some data sent by the codecs, e.g.
wm9712, is not in the datastream. Also some data is mixed up in the
fifos, so that we need to sort them out manually.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06 17:57:24 +01:00
Markus Pargmann 8548a464b9 ASoC: imx-audmux: Read default configuration from devicetree
Adds a function to parse a default port configuration from devicetree.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06 17:57:24 +01:00
Kuninori Morimoto 2460719c79 ASoC: rsnd: scu: cleanup empty functions
This patch cleanups empty functions on scu

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06 17:56:13 +01:00
Kuninori Morimoto 374a528111 ASoC: rsnd: SSI supports DMA transfer via BUSIF
This patch adds BUSIF support for R-Car sound DMAEngine transfer.
The sound data will be transferred via FIFO which can cover blank time
which will happen when DMA channel is switching.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06 17:56:13 +01:00
Kuninori Morimoto 849fc82a6f ASoC: rsnd: SSI supports DMA transfer
This patch adds DMAEngine transfer on SSI.
But, it transfers sound data from memory to SSI directly
without using HPBIF at this time.
It will be updated soon

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06 17:56:13 +01:00
Kuninori Morimoto 0a4d94c07c ASoC: rsnd: add common DMAEngine method
R-Car Sound driver will support DMA transfer in the future,
then, SSI/SRU/SRC will use it.
Current R-Car can't use soc-dmaengine-pcm.c since its DMAEngine
doesn't support dmaengine_prep_dma_cyclic(),
and SSI needs double plane transfer (which needs special submit) on DMAC.
This patch adds common DMAEngine method for it

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06 17:56:13 +01:00
Kuninori Morimoto 4b4dab8234 ASoC: rsnd: remove platform dai and add dai_id on platform setting
Current rsnd driver is using struct rsnd_dai_platform_info
so that indicate sound DAI information (playback/capture SSI ID).
But, SSI settings were also required separately.
Thus, platform settings was very un-understandable.
This patch adds dai_id to SSI
settings, and removed rsnd_dai_platform_info.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06 17:56:13 +01:00
Charles Keepax c7f3843575 ASoC: wm5110: Correct input OSR bits for wm5110
The input OSR bits are specified differently for wm5110 than for current
revs of wm5102. This patch corrects support for this on wm5110.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06 17:41:33 +01:00
Lars-Peter Clausen 0d59ff3a24 ASoC: twl4030: Remove embedded snd_soc_codec structs from private data structs
It is unused and a leftover of the pre multi-component era.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06 17:08:24 +01:00
Lars-Peter Clausen 95ad868289 ASoC: mc13783: Remove embedded snd_soc_codec structs from private data structs
It is unused and a leftover of the pre multi-component era.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06 12:43:54 +01:00
Lars-Peter Clausen f8f11795b9 ASoC: tlv320aic26: Fix keyclick feature
The tlv320aic26 contains a embedded snd_soc_codec struct which is referenced in
the keyclick code. That struct is never initialized though, replace the embedded
struct with a pointer and use that in the keyclick code.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06 12:43:05 +01:00
Mark Brown ed6a277239 ASoC: wm8994: Fix class W controls
Commit 6e0650 (ASoC: wm8994: Use SOC_SINGLE_EXT() instead of open-coding
it) went too far and converted a DAPM control to use SOC_SINGLE_EXT()
which crashes.  Revert that portion of the patch.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06 10:52:01 +01:00
Eldad Zack e7e58df8ef ALSA: usb-audio: WARN_ON when alts is passed as NULL
Prevent NULL dereference in snd_usb_add_endpoints(), when
alts is passed as NULL. In this case, WARN (since this is
a non-fatal bug) and return NULL ep. Call sites treat a NULL
return value as an error.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:52:27 +02:00
Eldad Zack 88abb8eff4 ALSA: usb-audio: remove implicit_fb from quirk
Since the quirks all apply to implicit feedback (the source endpoint
is always a data endpoint), there's no need to set and check
a flag for it.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:52:14 +02:00
Eldad Zack 914273c714 ALSA: usb-audio: remove is_playback from implicit feedback quirks
An implicit feedback endpoint can only be a capture source. The
consumer (sink) of the implicit feedback endpoint is therefore limited
to playback EPs.
Check if the target endpoint is a playback first and remove redundant
checks.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:51:48 +02:00
Eldad Zack 95fec88332 ALSA: usb-audio: do not initialize and check implicit_fb
Since implicit_fb is not changed, !implicit_fb will always
be true - it is set only after these checks.
Similarly, there's also no need to set it at the top of the function.

Change the type of implicit_fb to bool (more appropriate).

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:51:11 +02:00
Eldad Zack f34d065013 ALSA: usb-audio: reverse condition logic in set_sync_endpoint
Reverse logic on the conditions required to qualify for a sync endpoint
and remove one level of indendation.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:50:15 +02:00
Eldad Zack a60945fd08 ALSA: usb-audio: move implicit fb quirks to separate function
Separate setting implicit feedback quirks from setting
a sync endpoint (which may also be explicit feedback or async).

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:49:21 +02:00
Eldad Zack 71bb64c56d ALSA: usb-audio: separate sync endpoint setting from set_format
Setting the sync endpoint currently takes up about half of set_format().
Move it to a dedicated function.
No functional change.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:48:34 +02:00
Eldad Zack d133f2c22e ALSA: usb-audio: remove assignment from if condition
Following general kernel style.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:48:22 +02:00
Eldad Zack d833cdb10c ALSA: usb-audio: remove disabled debug code in set_format
Code block does not compile when enabled.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:48:12 +02:00
Lothar Waßmann d66a5b9c82 ASoC: mxs: add some error messages to help identifying problems
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 19:03:19 +01:00
Mark Brown 55af2d23c6 ASoC: pcm1792a: Fix build with !OF
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 18:20:53 +01:00
Mark Brown 6c3137fd01 Merge remote-tracking branch 'asoc/topic/pcm1681' into asoc-new-pcm
Trivial add/add conflicts:
	sound/soc/codecs/Kconfig
	sound/soc/codecs/Makefile
2013-08-05 18:12:39 +01:00
Russell King e4065f3ff1 ASoC: kirkwood: move calculation of max buffer size to kirkwood.h
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 18:06:57 +01:00
Russell King 64ddf1f89c ASoC: kirkwood: combine kirkwood-i2s and kirkwood-dma drivers
These really should be a single driver because they're fully integrated
in hardware.  Make them so.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 18:06:30 +01:00
Russell King db43b16fa0 ASoC: kirkwood: provide KIRKWOOD_PLAYCTL_ENABLE_MASK
Provide a helper macro which includes the sum of all enable bits in
the playback control register.  This simplifies the code a little.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 18:03:23 +01:00
Michael Trimarchi 13b02fa0db ASoC: Add PCM1792A spi mode codec support
Add PCM1792A spi mode codec support. This version implements only
a subset of functionalities. Tested connect to a pandaboard ES
device and based on recently pcm1681 codec.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 18:01:29 +01:00
Russell King 19c2c5f55e ASoC: avoid duplicated DAI routes
ASoC automatically creates snd_soc_dapm_dai_in and snd_soc_dapm_dai_out
widgets for DAI drivers, and adds them to the list.  Later on, ASoC
creates automatic routes between these widgets and a widget with a
stream name.

We look for a snd_soc_dapm_dai_in or snd_soc_dapm_dai_out widget, and
use this to obtain the DAI structure.  We then scan all widgets for
any with a stream name refering to either the capture or the playback
stream, and create routes.

If you have both a snd_soc_dapm_dai_in and a snd_soc_dapm_dai_out
referring to the same DAI structure, this ends up creating one set of
routes for the DAI for the snd_soc_dapm_dai_in widget, and a duplicated
set of routes for the snd_soc_dapm_dai_out widget.

Fix this by checking that the stream name for the widget matches the
DAI widget name.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 17:16:41 +01:00
Russell King af64d7341a ASoC: kirkwood: Free external clock if it is a duplicate of internal
[Remaining patch from "ASoC: kirkwood: use devm_clk_get() for the
external clock" -- broonie]

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 17:11:12 +01:00
Richard Fitzgerald 9d58a07746 ASoC: core: init delayed_work for codec-codec links
We must init the delayed_work for codec-codec links
otherwise shutting down the DAI chain will fault when
calling flush_delayed_work_sync() on the linked DAI.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 17:07:57 +01:00
Oskar Schirmer e06e4c2d53 ASoC: sgtl5000: fix codec clock source transition to avoid clockless moment
Powering down PLL before switching to a mode that does not use it
is a bad idea. It would cause the SGTL5000 be without internal
clock supply, especially on the I2C interface, which would make
subsequent access to it fail.

Thus, in case of not using PLL any longer, first set the mode
control, then power down PLL.

Signed-off-by: Oskar Schirmer <oskar@scara.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 17:03:42 +01:00
Lars-Peter Clausen 57295073b6 ASoC: dapm: Implement mixer input auto-disable
Some devices have the problem that if a internal audio signal source is disabled
the output of the source becomes undefined or goes to a undesired state (E.g.
DAC output goes to ground instead of VMID). In this case it is necessary, in
order to avoid unwanted clicks and pops, to disable any mixer input the signal
feeds into or to active a mute control along the path to the output. Often it is
still desirable to expose the same mixer input control to userspace, so cerain
paths can sill be disabled manually. This means we can not use conventional DAPM
to manage the mixer input control. This patch implements a method for letting
DAPM overwrite the state of a userspace visible control. I.e. DAPM will disable
the control if the path on which the control sits becomes inactive. Userspace
will then only see a cached copy of the controls state. Once DAPM powers the
path up again it will sync the userspace setting with the hardware and give
control back to userspace.

To implement this a new widget type is introduced. One widget of this type will
be created for each DAPM kcontrol which has the auto-disable feature enabled.
For each path that is controlled by the kcontrol the widget will be connected to
the source of that path. The new widget type behaves like a supply widget,
which means it will power up if one of its sinks are powered up and will only
power down if all of its sinks are powered down. In order to only have the mixer
input enabled when the source signal is valid the new widget type will be
disabled before all other widget types and only be enabled after all other
widget types.

E.g. consider the following simplified example. A DAC is connected to a mixer
and the mixer has a control to enable or disable the signal from the DAC.

                     +-------+
  +-----+            |       |
  | DAC |-----[Ctrl]-| Mixer |
  +-----+       :    |       |
     |          :    +-------+
     |          :
    +-------------+
    | Ctrl widget |
    +-------------+

If the control has the auto-disable feature enabled we'll create a widget for
the control. This widget is connected to the DAC as it is the source for the
mixer input. If the DAC powers up the control widget powers up and if the DAC
powers down the control widget is powered down. As long as the control widget
is powered down the hardware input control is kept disabled and if it is enabled
userspace can freely change the control's state.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 15:50:27 +01:00
Russell King a7d0942979 ASoC: kirkwood: merge struct kirkwood_dma_priv with struct kirkwood_dma_data
Merge these two structures together; nothing other than the I2S and
DMA driver makes use of struct kirkwood_dma_data, and it's not like
struct kirkwood_dma_data is really just used to convey DMA specific
data to the backend; it's more a general shared structure between the
two halves.

This will later allow kirkwood-dma.c and kirkwood-i2s.c to be merged
together.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 15:49:20 +01:00
Russell King 6ad709482e ASoC: spdif_transceiver: add output pin widget
CODECs without any outputs now remain powered down, which means any
paths to these codecs also remain powered down.

Add an always-enabled output pin widget to the spdif transceiver codec.
This enables DAPM to correctly identify that the spdif transceiver is
in use when playback is enabled, which will then allow DAPM to power up
any links from the CPU DAI to the S/PDIF transceiver.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 12:32:40 +01:00
Chih-Chung Chang bde7bc6014 ALSA: hda - Fix jack gating when auto_{mute,mic} is suppressed.
The snd_hda_jack_set_gating_jack() call didn't work when
auto_{mute,mic} is suppressed because (1) am_entry is
not filled with nid of the mic pin. (2) The jacks are not
created (by snd_hda_jack_detect_enable_callback) before the
snd_hda_jack_set_gating_jack call.

Now we use the first input pin nid directly, and create the jack if it
doesn't exist yet.

Signed-off-by: Chih-Chung Chang <chihchung@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-05 11:19:59 +02:00
Takashi Iwai 697aebab78 ALSA: hda - Fix missing fixup for Mac Mini with STAC9221
A fixup for Apple Mac Mini was lost during the adaption to the generic
parser because the fallback for the generic ID 8384:7680 was dropped,
and it resulted in the silence output (and maybe other problems).

Unfortunately, just adding the missing subsystem ID wasn't enough, in
this case.  The subsystem ID of this machine is 0000:0100 (what Apple
thought...?), and since snd_hda_pick_fixup() doesn't take the vendor
id zero into account, the driver ignored this entry.  Now it's fixed
to regard the vendor id zero as a valid value.

Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org> [v3.9+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-02 08:16:52 +02:00
Lars-Peter Clausen fe58139114 ASoC: dapm: Fix empty list check in dapm_new_mux()
list_first_entry() will always return a valid pointer, even if the list is
empty. So the check whether path is NULL will always be false. So we end up
calling dapm_create_or_share_mixmux_kcontrol() with a path struct that points
right in the middle of the widget struct and by trying to modify the path the
widgets memory will become corrupted. Fix this by using list_emtpy() to check if
the widget doesn't have any paths.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
2013-08-01 19:25:16 +01:00
Lars-Peter Clausen 2c75bdf3fd ASoC: dapm: Fix kcontrol path list corruption
When calling krealloc for the kcontrol data the items in the path list that
point back to the head of the list will now point to freed memory, which causes
the list to become corrupted. To fix this, instead of resizing the whole data
struct, only resize the widget list.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-01 19:24:28 +01:00
Lothar Waßmann 65f2b22676 ASoC: sgtl5000: fix buggy 'Capture Attenuate Switch' control
The SGTL5000 Capture Attenuate Switch (or "ADC Volume Range Reduction"
as it is called in the manual) is single bit only.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-01 14:48:20 +01:00
Lothar Waßmann f091f3f073 ASoC: sgtl5000: prevent playback to be muted when terminating concurrent capture
When a sound capture/playback is terminated while a playback/capture
is running, power_vag_event() will clear SGTL5000_CHIP_ANA_POWER in
the SND_SOC_DAPM_PRE_PMD event, thus muting the respective other
channel.

Don't clear SGTL5000_CHIP_ANA_POWER when both DAC and ADC are active
to prevent this.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-01 14:48:17 +01:00
Bard Liao 868ead653e ASoC: rt5640: remove unused mux
Remove unused "INL Mux" and "INR Mux".

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-01 14:45:22 +01:00
Lars-Peter Clausen 9356e9d51c ASoC: dapm: Check return value of snd_soc_cnew()
snd_soc_cnew() can return NULL, so we should check the result before trying to
use it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-01 14:12:59 +01:00
Mark Brown 2f6f0ffb2b ASoC: samsung: Make secondary I2S DAI device a child of primary
More for neatness than for any great utility. Really we shouldn't be
creating the child device at all, refactoring will follow.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-01 12:01:29 +01:00
Dimitris Papastamos 92bb4c3270 ASoC: wm_adsp: Sanitize parameter passing
No need to hold on to the `codec' pointer.  We can use the `dsp'
pointer and grab all the information we need from there.  This
makes the parameters for the functions a bit more sane and idiomatic.

Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-01 11:58:46 +01:00
Marek Belisko 95169d080f ASoC: Add PCM1681 codec driver.
PCM1681 can be controlled via I2C, SPI or in bootstrap mode (no control mode). This code add
support only for I2C mode.

Signed-off-by: Marek Belisko <marek.belisko@streamunlimited.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-01 10:40:02 +01:00
Takashi Iwai 209fb1b7e2 ASoC: Fixes for v3.11
A fix to make sure userspace knows when control writes have caused a
 change in value, fixing some UIs, plus a few few driver fixes mainly
 cleaning up issues from recent refactorings on less mainstream platforms.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJR+iU1AAoJELSic+t+oim9vJcP/Ro/AhPccuGwTa7tyMFSGAYO
 3xQh4REis7TGgCWu018G+zA4bS5Inrqo7B0M61PFxCJoZ3R4QvIgKXHasQ9SNXmW
 +nUYqs05rgzl4U2uyEUNLoVelFa1ZbQLKQxuOUQt0+u9rvtBZczNd85KeNtn3IVp
 38LTc2scrxo2HmU7UE418euPuFYiz7PMWKSMGd/r5Ht2h6Tij8eQ/Vkm8IgKJ7n6
 kfMZCdMgTx0k/JC3Akz2colIIc0I8ioV2FWkZ1XAMaktFR0u585EbqBC2QJhiXRF
 RJREXCxp8SGI4H961m53GICk39xfWLC7d1/sprzWDWZ6XTM5T9rp8x3iJNw74AcG
 2ERMrDjlJKNVpedhnY7KgtegC+qT/9XcLa1qKpAR9Ym61HUvRvUVD9OsEJ4l5ISn
 m+EZFt1Z9BhXU/HlhLN9Nr6mw0A6OnpvyUwR8cR83gz9OHFCmg8MOxVP26sNQSuX
 1Ll7XRikSxC5n4AxG3APE8MLB7bcvUoL7benD4zekXG+pJhoefg5hmL7qvMCv+fy
 bkeFafc3QUSsaiuf2tQjfHF99wvJC/BWt4cx1hdRjLNMxqoJre5hpJE9/l4JLs7X
 Z6j6RTOD7/cXPZNMh67zK2w/V2NzcvK9I4U20HA9+IjfiYYugCc2XzCLaYrp1bwo
 6P8Y8EXhUC3thSti/WUZ
 =WtLE
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.11

A fix to make sure userspace knows when control writes have caused a
change in value, fixing some UIs, plus a few few driver fixes mainly
cleaning up issues from recent refactorings on less mainstream platforms.
2013-08-01 11:12:10 +02:00
Dimitris Papastamos d4780eec77 ASoC: wm0010: Use DMA-safe memory for SPI transfers
We should be allocating our buffers for the SPI transfers
from the DMA zone.

Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-01 10:01:42 +01:00
Mark Brown 3fef7f795f Merge remote-tracking branch 'asoc/fix/wm0010' into asoc-linus 2013-07-31 21:07:23 +01:00
Mark Brown 08d0a9757d Merge remote-tracking branch 'asoc/fix/dapm' into asoc-linus 2013-07-31 21:07:23 +01:00
Mark Brown 0d054318d5 Merge remote-tracking branch 'asoc/fix/blackfin' into asoc-linus 2013-07-31 21:07:22 +01:00
Peter Ujfalusi 8fe120b5a6 ASoC: omap-abe-twl6040: Remove support for pdata (legacy boot)
Just recently OMAP4 legacy boot support has been removed. No reason to keep
the code used by the legacy boot (pdata based) since neither OMAP4 or OMAP5
can boot in this mode.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-31 20:03:00 +01:00
Wei Yongjun 70263cb474 ASoC: rcar: fix return value check in rsnd_gen1_probe()
In case of error, the function devm_ioremap_resource() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR(), and also remove the dev_err call to avoid redundant
error message.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-31 15:00:01 +01:00
Fabio Estevam 3f1a91aa25 ASoC: fsl: Fix module build
Building imx_v6_v7_defconfig with all audio drivers as modules results in
the folowing build error:

ERROR: "imx_pcm_fiq_init" [sound/soc/fsl/snd-soc-imx-ssi.ko] undefined!
ERROR: "imx_pcm_dma_init" [sound/soc/fsl/snd-soc-imx-ssi.ko] undefined!
ERROR: "imx_pcm_fiq_exit" [sound/soc/fsl/snd-soc-imx-ssi.ko] undefined!
ERROR: "imx_pcm_dma_exit" [sound/soc/fsl/snd-soc-imx-ssi.ko] undefined!
ERROR: "imx_pcm_dma_init" [sound/soc/fsl/snd-soc-fsl-ssi.ko] undefined!
ERROR: "imx_pcm_dma_exit" [sound/soc/fsl/snd-soc-fsl-ssi.ko] undefined!

Fix this by allowing SND_SOC_IMX_PCM_FIQ and SND_SOC_IMX_PCM_DMA to be also
built as modules and by using 'IS_ENABLED' to cover the module case.

Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-31 14:59:11 +01:00
Dimitris Papastamos 4f8b19143d ASoC: wm0010: Fix resource leak
If kzalloc() fails for `img' then we are going to leak the memory
for `out'.  We are freeing the memory of all the tx/rx transfers
but the tx/rx buf pointers will be NULL if we drop out earlier.

Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-31 14:50:34 +01:00
Nicolin Chen db5ff9541b ASoC: spdif: Add S20_3LE and S24_LE support for dummy codec drivers
Generally, S/PDIF supports 20bit and optional 24bit samples. Thus add these
two formats for the dummy codec drivers.

If one S/PDIF controller has its own limitation, its CPU DAI driver should
set the supported format by its own circumstance, since the soc-pcm driver
will use the intersection of cpu_dai's formats and codec_dai's formats.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-31 14:27:48 +01:00
Dan Carpenter 46a02c978f ASoC: dapm: using freed pointer in dapm_kcontrol_add_widget()
There is a typo here so we end up using the old freed pointer instead of
the newly allocated one.  (If the "n" is zero then the code works,
obviously).

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-31 12:19:25 +01:00
Ralf Baechle d2ee88d0aa ASoC: au1x: Fix build
d8b51c11ff [ASoC: ac97c: Use
module_platform_driver()] broke the build:

 CC      sound/soc/au1x/ac97c.o
/home/ralf/src/linux/upstream-sfr/sound/soc/au1x/ac97c.c:344:1: error: expected identifier or ‘(’ before ‘&’ token
/home/ralf/src/linux/upstream-sfr/sound/soc/au1x/ac97c.c:344:1: error: pasting "__initcall_" and "&" does not give a valid preprocessing token
/home/ralf/src/linux/upstream-sfr/sound/soc/au1x/ac97c.c:344:1: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘&’ token
/home/ralf/src/linux/upstream-sfr/sound/soc/au1x/ac97c.c:344:1: error: expected identifier or ‘(’ before ‘&’ token
/home/ralf/src/linux/upstream-sfr/sound/soc/au1x/ac97c.c:344:1: error: pasting "__exitcall_" and "&" does not give a valid preprocessing token
/home/ralf/src/linux/upstream-sfr/sound/soc/au1x/ac97c.c:344:1: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘&’ token
/home/ralf/src/linux/upstream-sfr/sound/soc/au1x/ac97c.c:334:31: warning: ‘au1xac97c_driver’ defined but not used [-Wunused-variable]
make[5]: *** [sound/soc/au1x/ac97c.o] Error 1
make[4]: *** [sound/soc/au1x] Error 2
make[3]: *** [sound/soc] Error 2

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-31 10:06:04 +01:00
Lars-Peter Clausen 50b4dc690a ASoC: bf5xx-ac97: Remove unused extern declaration
The blackfin ac97 driver never defines nor uses a global ac97 struct. So remove
the extern declaration for it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 13:01:09 +01:00
Lars-Peter Clausen 610d80eaa9 ASoC: bf5xx-ac97: Fix compile error with SND_BF5XX_HAVE_COLD_RESET
If CONFIG_SND_BF5XX_HAVE_COLD_RESET is enabled building the blackfin ac97 driver
fails with the following compile error:
	sound/soc/blackfin/bf5xx-ac97.c: In function ‘asoc_bfin_ac97_probe’:
	sound/soc/blackfin/bf5xx-ac97.c:297: error: expected ‘;’ before ‘{’ token
	sound/soc/blackfin/bf5xx-ac97.c:302: error: label ‘gpio_err’ used but not defined

The issue was introduced in commit 6dab2fd7 ("ASoC: bf5xx-ac97: Convert to
devm_gpio_request_one()").

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 12:51:02 +01:00
Richard Genoud 0890c2b7be ASoC: wm8731: add rates constraints
Depending on the mclk (or crystal) selected, the wm8731 codec have some
constraints on its data sampling rates:
e.g. with a 12.288MHz or 18.432MHz crystal, the authorized rates are
8KHz, 32KHz, 48KHz and 96KHz.

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 12:28:01 +01:00
Russell King 113591e477 ASoC: uda134x: fix codec driver by converting to DAPM
For some reason, the DAC/ADCs are not being powered up when I try and
use the UDA1341 driver; this used to work.  Looking back in the git
history, I don't see anything obvious which would cause this
regression.

However, from dumping the register writes, it seems that the codec is
powered down, and nothing calls set_bias_level to wake the codec up.

Moreover, this driver hasn't had DAPM support added to it, which
prevents platform drivers from taking advantage of DAPMs facilities.
So, let's add DAPM support to the driver.

As we move the power control for the DAC/ADC into DAPM, we no longer
need it in set_bias_level() - this function just becomes a way to
manipulate the power control and sync the register cache with the
hardware at the appropriate point.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 12:04:02 +01:00
Lars-Peter Clausen 39eb5fd13d ASoC: dapm: Delay w->power update until the changes are written
Wait with updating the widgets power field until the changes are actually
written to the hardware in dapm_seq_run_coalesced(). This will allow us to query
the current hardware state between calling dapm_power_one_widget() and actually
writing the new power state to hardware.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 18:41:00 +01:00
Lars-Peter Clausen 2553628e19 ASoC: dapm: Add snd_soc_dapm_add_path() helper function
snd_soc_dapm_add_path() is similar to snd_soc_dapm_add_route() except that it
expects the pointer to the source and sink widgets instead of their names. This
allows us to simplify the case where we already have a pointer to widgets. (E.g.
as we have in snd_soc_dapm_link_dai_widgets()). snd_soc_dapm_add_route() will be
updated to just look up the widget and then use snd_soc_dapm_add_path() to
handle everything else.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 18:41:00 +01:00
Lars-Peter Clausen de9ba98b6d ASoC: dapm: Make widget power register settings more flexible
Currently the DAPM code is limited to only setting or clearing a single bit in a
register to power a widget up or down. This patch extends the DAPM code to be
more flexible in that regard and allow widgets to use arbitrary values to be
used to put a widget in either on or off state.

Since the snd_soc_dapm_widget struct already contains a on_val and off_val field
no additional fields need to be added and in fact the invert field can even be
removed. Also the generated code is slightly smaller.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 18:41:00 +01:00
Lars-Peter Clausen 5106b92f80 ASoC: dapm: Keep a list of paths per kcontrol
Currently we store for each path which control (if any at all) is associated
with that control. But we are only ever interested in the reverse relationship,
i.e. we want to know all the paths a certain control is associated with. This is
currently implemented by always iterating over all paths. This patch updates the
code to keep a list for each control which contains all the paths that are
associated with that control. This improves the run time of e.g.
soc_dapm_mixer_update_power() and soc_dapm_mux_update_power() from O(n) (with n
being the number of paths for the card) to O(1).

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 18:41:00 +01:00
Lars-Peter Clausen cf7c1de20c ASoC: dapm: Move 'value' field from widget to control
The 'value' field is really per control and not per widget. Currently it is only
used for virtual MUXes, which only have one control per widget. So in that case
there is not so much of a difference between whether it is stored per widget or
per control. Moving the 'value' field from the widget to the control will allow
us to use it also for cases where we have more than one control per widget. E.g.
for mixers with multiple input controls.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 18:41:00 +01:00
Lars-Peter Clausen e84357f760 ASoC: dapm: Wrap kcontrol widget list access
In preparation for adding additional per control data wrap all access to the
widget list in helper functions.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 18:40:59 +01:00
Lars-Peter Clausen eee5d7f99a ASoC: dapm: Add a helper to get the CODEC for DAPM kcontrol
We use the same 3 lines to get the CODEC for a kcontrol in a quite a few places.
This patch puts them into a common helper function. Having this encapsulated in
a helper function will also make it more easier to eventually change the data
layout of the kcontrol's private data.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 18:40:59 +01:00