Commit Graph

75 Commits

Author SHA1 Message Date
Linus Torvalds b1a808ff43 Merge branch 'for-next' of git://gitorious.org/kernel-hsi/kernel-hsi
Pull HSI (High Speed Synchronous Serial Interface) framework from Carlos Chinea:
 "The High Speed Synchronous Serial Interface (HSI) is a serial
  interface mainly used for connecting application engines (APE) with
  cellular modem engines (CMT) in cellular handsets.

  The framework is currently being used for some people and we would
  like to see it integrated into the kernel for 3.3.  There is no HW
  controller drivers in this pull, but some people have already some of
  them pending which they would like to push as soon as this integrated.
  I am also working on the acceptance for an TI OMAP one, based on a
  compatible legacy version of the interface called SSI."

Ok, so it didn't get into 3.3, but here it is pulled into 3.4.

Several people piped up to say "yeah, we want this".

* 'for-next' of git://gitorious.org/kernel-hsi/kernel-hsi:
  HSI: hsi_char: Update ioctl-number.txt
  HSI: Add HSI API documentation
  HSI: hsi_char: Add HSI char device kernel configuration
  HSI: hsi_char: Add HSI char device driver
  HSI: hsi: Introducing HSI framework
2012-04-02 09:50:40 -07:00
Linus Torvalds 46b407ca4a remoteproc/rpmsg: new subsystem
This new subsystem provides a common way to talk to secondary processors
 on an SoC, e.g. a DSP, GPU or service processor, using virtio as the
 transport. In the long run, it should replace a few dozen vendor
 specific ways to do the same thing, which all never made it into the
 upstream kernel. There is a broad agreement that rpmsg is the way to
 go here and several vendors have started working on replacing their
 own subsystems.
 
 Two branches each add one virtio protocol number. Fortunately the
 numbers were agreed upon in advance, so there are only context changes.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUAT24/OmCrR//JCVInAQJmfQ/+NklCaFIHX5Mbi1ZdeekT1p8l7OVXs1zU
 ygJA86Vlbz3dL7t08HcAqS+C3tGE4iTGp9IJrBQBjZdCuPJujyB+xAYFNU39TZzH
 osdiSSQZapkIzMcviCqQPO70bzUPWtskXmVNmrKiHOM7HLHMWRWUqtfj2wNqqeIa
 l+mCC3q9ZV4JJ9puzW9UMRZKsSUYNJ9q/MfAbBHXJawhKtZWpT5Luwa8s2KTFfz3
 XY6iW+FfY6d6+jU3p9AGxZqT02V9H/mOqP9dyM6wK6BfHrISFYIkN+KAzhMkxY+Z
 p7folq/WipN9XoizWql7QKAa4wKMyhRNmScfCfSdKhSOzWzWMiu9ySLUqx/KEJq7
 OknCtnHNhAp/hcR39f2Nv6mLNxA01WeUvaPTzzjTotpwCEcbcZpsGT/OBN/vZyZ5
 ZAqZlEg/D65ZIU2dESx2U2XMiGTBc7AAgfLj0PjmhsMH3bVlG3IHcnGH6wqwGpvH
 zglaCy67/htEW6jMFjhqginXssPtcaFGz56g+/WkEyvYCJTwdMAiXc05uZS/EeZT
 uF8Vpg3cEFDJUtGrcA9FSKZ/2f6pLKvHY7yYRGwhR7pajQl7I0WDwgCQmy4pE6Ao
 l9MNeoPKQyFmuVhZbQP4QLRRGDD6Hm+qbPRqaRJI2DuM2g8v6Yk3ydd8EOgHm+O3
 n1W0zBfQ2l4=
 =SC55
 -----END PGP SIGNATURE-----

Merge tag 'rpmsg' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "remoteproc/rpmsg: new subsystem" from Arnd Bergmann:
 "This new subsystem provides a common way to talk to secondary
  processors on an SoC, e.g.  a DSP, GPU or service processor, using
  virtio as the transport.  In the long run, it should replace a few
  dozen vendor specific ways to do the same thing, which all never made
  it into the upstream kernel.  There is a broad agreement that rpmsg is
  the way to go here and several vendors have started working on
  replacing their own subsystems.

  Two branches each add one virtio protocol number.  Fortunately the
  numbers were agreed upon in advance, so there are only context
  changes.

  Signed-off-by: Arnd Bergmann <arnd@arndb.de>"

Fixed up trivial protocol number conflict due to the mentioned additions
next to each other.

* tag 'rpmsg' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits)
  remoteproc: cleanup resource table parsing paths
  remoteproc: remove the hardcoded vring alignment
  remoteproc/omap: remove the mbox_callback limitation
  remoteproc: remove the single rpmsg vdev limitation
  remoteproc: safer boot/shutdown order
  remoteproc: remoteproc_rpmsg -> remoteproc_virtio
  remoteproc: resource table overhaul
  rpmsg: fix build warning when dma_addr_t is 64-bit
  rpmsg: fix published buffer length in rpmsg_recv_done
  rpmsg: validate incoming message length before propagating
  rpmsg: fix name service endpoint leak
  remoteproc/omap: two Kconfig fixes
  remoteproc: make sure we're parsing a 32bit firmware
  remoteproc: s/big switch/lookup table/
  remoteproc: bail out if firmware has different endianess
  remoteproc: don't use virtio's weak barriers
  rpmsg: rename virtqueue_add_buf_gfp to virtqueue_add_buf
  rpmsg: depend on EXPERIMENTAL
  remoteproc: depend on EXPERIMENTAL
  rpmsg: add Kconfig menu
  ...

Conflicts:
	include/linux/virtio_ids.h
2012-03-27 16:30:09 -07:00
Joe Perches 6222d7a177 telephony: Move to staging
This stuff is really old and in quite poor shape.
Does anyone still use it?

If not, I think it's appropriate to let it simmer
in staging for a few releases.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-08 16:58:04 -08:00
Ohad Ben-Cohen bcabbccabf rpmsg: add virtio-based remote processor messaging bus
Add a virtio-based inter-processor communication bus, which enables
kernel drivers to communicate with entities, running on remote
processors, over shared memory using a simple messaging protocol.

Every pair of AMP processors share two vrings, which are used to send
and receive the messages over shared memory.

The header of every message sent on the rpmsg bus contains src and dst
addresses, which make it possible to multiplex several rpmsg channels on
the same vring.

Every rpmsg channel is a device on this bus. When a channel is added,
and an appropriate rpmsg driver is found and probed, it is also assigned
a local rpmsg address, which is then bound to the driver's callback.

When inbound messages carry the local address of a bound driver,
its callback is invoked by the bus.

This patch provides a kernel interface only; user space interfaces
will be later exposed by kernel users of this rpmsg bus.

Designed with Brian Swetland <swetland@google.com>.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au> (virtio_ids.h)
Cc: Brian Swetland <swetland@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
2012-02-08 22:53:58 +02:00
Ohad Ben-Cohen 400e64df6b remoteproc: add framework for controlling remote processors
Modern SoCs typically employ a central symmetric multiprocessing (SMP)
application processor running Linux, with several other asymmetric
multiprocessing (AMP) heterogeneous processors running different instances
of operating system, whether Linux or any other flavor of real-time OS.

Booting a remote processor in an AMP configuration typically involves:
- Loading a firmware which contains the OS image
- Allocating and providing it required system resources (e.g. memory)
- Programming an IOMMU (when relevant)
- Powering on the device

This patch introduces a generic framework that allows drivers to do
that. In the future, this framework will also include runtime power
management and error recovery.

Based on (but now quite far from) work done by Fernando Guzman Lugo
<fernando.lugo@ti.com>.

ELF loader was written by Mark Grosen <mgrosen@ti.com>, based on
msm's Peripheral Image Loader (PIL) by Stephen Boyd <sboyd@codeaurora.org>.

Designed with Brian Swetland <swetland@google.com>.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Brian Swetland <swetland@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
2012-02-08 22:52:56 +02:00
Carlos Chinea a056ab8c7a HSI: hsi: Introducing HSI framework
Adds HSI framework in to the linux kernel.

High Speed Synchronous Serial Interface (HSI) is a
serial interface mainly used for connecting application
engines (APE) with cellular modem engines (CMT) in cellular
handsets.

HSI provides multiplexing for up to 16 logical channels,
low-latency and full duplex communication.

Signed-off-by: Carlos Chinea <carlos.chinea@nokia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-05 15:42:13 +02:00
Bart Van Assche a48b0c4c7d hv: Move Kconfig menu entry
Move the "Device Drivers/Microsoft Hyper-V guest support"
menu entry up such that it appears immediately below virtio
(KVM and lguest guest driver support) instead of after a
hypervisor driver menu entry.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26 17:05:33 -08:00
Linus Torvalds aa77677e0a Merge branch 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1519 commits)
  staging: et131x: Remove redundant check and return statement
  staging: et131x: Mainly whitespace changes to appease checkpatch
  staging: et131x: Remove last of the forward declarations
  staging: et131x: Remove even more forward declarations
  staging: et131x: Remove yet more forward declarations
  staging: et131x: Remove more forward declarations
  staging: et131x: Remove forward declaration of et131x_adapter_setup
  staging: et131x: Remove some forward declarations
  staging: et131x: Remove unused rx_ring.recv_packet_pool
  staging: et131x: Remove call to find pci pm capability
  staging: et131x: Remove redundant et131x_reset_recv() call
  staging: et131x: Remove unused rx_ring.recv_buffer_pool
  Staging: bcm: Fix three initialization errors in InterfaceDld.c
  Staging: bcm: Fix coding style issues in InterfaceDld.c
  staging:iio:dac: Add AD5360 driver
  staging:iio:trigger:bfin-timer: Fix compile error
  Staging: vt6655: add some range checks before memcpy()
  Staging: vt6655: whitespace fixes to iotcl.c
  Staging: vt6656: add some range checks before memcpy()
  Staging: vt6656: whitespace cleanups in ioctl.c
  ...

Fix up conflicts in:
 - drivers/{Kconfig,Makefile}, drivers/staging/{Kconfig,Makefile}:
	vg driver movement
 - drivers/staging/brcm80211/brcmfmac/{dhd_linux.c,mac80211_if.c}:
	driver removal vs now stale changes
 - drivers/staging/rtl8192e/r8192E_core.c:
	driver removal vs now stale changes
 - drivers/staging/et131x/et131*:
	driver consolidation into one file, tried to do fixups
2011-10-26 15:39:02 +02:00
Linus Torvalds 7e0bb71e75 Merge branch 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
* 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (63 commits)
  PM / Clocks: Remove redundant NULL checks before kfree()
  PM / Documentation: Update docs about suspend and CPU hotplug
  ACPI / PM: Add Sony VGN-FW21E to nonvs blacklist.
  ARM: mach-shmobile: sh7372 A4R support (v4)
  ARM: mach-shmobile: sh7372 A3SP support (v4)
  PM / Sleep: Mark devices involved in wakeup signaling during suspend
  PM / Hibernate: Improve performance of LZO/plain hibernation, checksum image
  PM / Hibernate: Do not initialize static and extern variables to 0
  PM / Freezer: Make fake_signal_wake_up() wake TASK_KILLABLE tasks too
  PM / Hibernate: Add resumedelay kernel param in addition to resumewait
  MAINTAINERS: Update linux-pm list address
  PM / ACPI: Blacklist Vaio VGN-FW520F machine known to require acpi_sleep=nonvs
  PM / ACPI: Blacklist Sony Vaio known to require acpi_sleep=nonvs
  PM / Hibernate: Add resumewait param to support MMC-like devices as resume file
  PM / Hibernate: Fix typo in a kerneldoc comment
  PM / Hibernate: Freeze kernel threads after preallocating memory
  PM: Update the policy on default wakeup settings
  PM / VT: Cleanup #if defined uglyness and fix compile error
  PM / Suspend: Off by one in pm_suspend()
  PM / Hibernate: Include storage keys in hibernation image on s390
  ...
2011-10-25 15:18:39 +02:00
Linus Walleij 2744e8afb3 drivers: create a pin control subsystem
This creates a subsystem for handling of pin control devices.
These are devices that control different aspects of package
pins.

Currently it handles pinmuxing, i.e. assigning electronic
functions to groups of pins on primarily PGA and BGA type of
chip packages which are common in embedded systems.

The plan is to also handle other I/O pin control aspects
such as biasing, driving, input properties such as
schmitt-triggering, load capacitance etc within this
subsystem, to remove a lot of ARM arch code as well as
feature-creepy GPIO drivers which are implementing the same
thing over and over again.

This is being done to depopulate the arch/arm/* directory
of such custom drivers and try to abstract the infrastructure
they all need. See the Documentation/pinctrl.txt file that is
part of this patch for more details.

ChangeLog v1->v2:

- Various minor fixes from Joe's and Stephens review comments
- Added a pinmux_config() that can invoke custom configuration
  with arbitrary data passed in or out to/from the pinmux driver

ChangeLog v2->v3:

- Renamed subsystem folder to "pinctrl" since we will likely
  want to keep other pin control such as biasing in this
  subsystem too, so let us keep to something generic even though
  we're mainly doing pinmux now.
- As a consequence, register pins as an abstract entity separate
  from the pinmux. The muxing functions will claim pins out of the
  pin pool and make sure they do not collide. Pins can now be
  named by the pinctrl core.
- Converted the pin lookup from a static array into a radix tree,
  I agreed with Grant Likely to try to avoid any static allocation
  (which is crap for device tree stuff) so I just rewrote this
  to be dynamic, just like irq number descriptors. The
  platform-wide definition of number of pins goes away - this is
  now just the sum total of the pins registered to the subsystem.
- Make sure mappings with only a function name and no device
  works properly.

ChangeLog v3->v4:

- Define a number space per controller instead of globally,
  Stephen and Grant requested the same thing so now maps need to
  define target controller, and the radix tree of pin descriptors
  is a property on each pin controller device.
- Add a compulsory pinctrl device entry to the pinctrl mapping
  table. This must match the pinctrl device, like "pinctrl.0"
- Split the file core.c in two: core.c and pinmux.c where the
  latter carry all pinmux stuff, the core is for generic pin
  control, and use local headers to access functionality between
  files. It is now possible to implement a "blank" pin controller
  without pinmux capabilities. This split will make new additions
  like pindrive.c, pinbias.c etc possible for combined drivers
  and chunks of functionality which is a GoodThing(TM).
- Rewrite the interaction with the GPIO subsystem - the pin
  controller descriptor now handles this by defining an offset
  into the GPIO numberspace for its handled pin range. This is
  used to look up the apropriate pin controller for a GPIO pin.
  Then that specific GPIO range is matched 1-1 for the target
  controller instance.
- Fixed a number of review comments from Joe Perches.
- Broke out a header file pinctrl.h for the core pin handling
  stuff that will be reused by other stuff than pinmux.
- Fixed some erroneous EXPORT() stuff.
- Remove mispatched U300 Kconfig and Makefile entries
- Fixed a number of review comments from Stephen Warren, not all
  of them - still WIP. But I think the new mapping that will
  specify which function goes to which pin mux controller address
  50% of your concerns (else beat me up).

ChangeLog v4->v5:

- Defined a "position" for each function, so the pin controller now
  tracks a function in a certain position, and the pinmux maps define
  what position you want the function in. (Feedback from Stephen
  Warren and Sascha Hauer).
- Since we now need to request a combined function+position from
  the machine mapping table that connect mux settings to drivers,
  it was extended with a position field and a name field. The
  name field is now used if you e.g. need to switch between two
  mux map settings at runtime.
- Switched from a class device to using struct bus_type for this
  subsystem. Verified sysfs functionality: seems to work fine.
  (Feedback from Arnd Bergmann and Greg Kroah-Hartman)
- Define a per pincontroller list of GPIO ranges from the GPIO
  pin space that can be handled by the pin controller. These can
  be added one by one at runtime. (Feedback from Barry Song)
- Expanded documentation of regulator_[get|enable|disable|put]
  semantics.
- Fixed a number of review comments from Barry Song. (Thanks!)

ChangeLog v5->v6:

- Create an abstract pin group concept that can sort pins into
  named and enumerated groups no matter what the use of these
  groups may be, one possible usecase is a group of pins being
  muxed in or so. The intention is however to also use these
  groups for other pin control activities.
- Make it compulsory for pinmux functions to associate with
  at least one group, so the abstract pin group concept is used
  to define the groups of pins affected by a pinmux function.
  The pinmux driver interface has been altered so as to enforce
  a function to list applicable groups per function.
- Provide an optional .group entry in the pinmux machine map
  so the map can select beteween different available groups
  to be used with a certain function.
- Consequent changes all over the place so that e.g. debugfs
  present reasonable information about the world.
- Drop the per-pin mux (*config) function in the pinmux_ops
  struct - I was afraid that this would start to be used for
  things totally unrelated to muxing, we can introduce that to
  the generic struct pinctrl_ops if needed. I want to keep
  muxing orthogonal to other pin control subjects and not mix
  these things up.

ChangeLog v6->v7:

- Make it possible to have several map entries matching the
  same device, pin controller and function, but using
  a different group, and alter the semantics so that
  pinmux_get() will pick all matching map entries, and
  store the associated groups in a list. The list will
  then be iterated over at pinmux_enable()/pinmux_disable()
  and corresponding driver functions called for each
  defined group. Notice that you're only allowed to map
  multiple *groups* to the same
  { device, pin controller, function } triplet, attempts
  to map the same device to multiple pin controllers will
  for example fail. This is hopefully the crucial feature
  requested by Stephen Warren.
- Add a pinmux hogging field to the pinmux mapping entries,
  and enable the pinmux core to hog pinmux map entries.
  This currently only works for pinmuxes without assigned
  devices as it looks now, but with device trees we can
  look up the corresponding struct device * entries when
  we register the pinmux driver, and have it hog each
  pinmux map in turn, for a simple approach to
  non-dynamic pin muxing. This addresses an issue from
  Grant Likely that the machine should take care of as
  much of the pinmux setup as possible, not the devices.
  By supplying a list of hogs, it can now instruct the
  core to take care of any static mappings.
- Switch pinmux group retrieveal function to grab an
  array of strings representing the groups rather than an
  array of unsigned and rewrite accordingly.
- Alter debugfs to show the grouplist handled by each
  pinmux. Also add a list of hogs.
- Dynamically allocate a struct pinmux at pinmux_get() and
  free it at pinmux_put(), then add these to the global
  list of pinmuxes active as we go along.
- Go over the list of pinmux maps at pinmux_get() time
  and repeatedly apply matches.
- Retrieve applicable groups per function from the driver
  as a string array rather than a unsigned array, then
  lookup the enumerators.
- Make the device to pinmux map a singleton - only allow the
  mapping table to be registered once and even tag the
  registration function with __init so it surely won't be
  abused.
- Create a separate debugfs file to view the pinmux map at
  runtime.
- Introduce a spin lock to the pin descriptor struct, lock it
  when modifying pin status entries. Reported by Stijn Devriendt.
- Fix up the documentation after review from Stephen Warren.
- Let the GPIO ranges give names as const char * instead of some
  fixed-length string.
- add a function to unregister GPIO ranges to mirror the
  registration function.
- Privatized the struct pinctrl_device and removed it from the
  <linux/pinctrl/pinctrl.h> API, the drivers do not need to know
  the members of this struct. It is now in the local header
  "core.h".
- Rename the concept of "anonymous" mux maps to "system" muxes
  and add convenience macros and documentation.

ChangeLog v7->v8:

- Delete the leftover pinmux_config() function from the
 <linux/pinctrl/pinmux.h> header.
- Fix a race condition found by Stijn Devriendt in pin_request()

ChangeLog v8->v9:

- Drop the bus_type and the sysfs attributes and all, we're not on
  the clear about how this should be used for e.g. userspace
  interfaces so let us save this for the future.
- Use the right name in MAINTAINERS, PIN CONTROL rather than
  PINMUX
- Don't kfree() the device state holder, let the .remove() callback
  handle this.
- Fix up numerous kerneldoc headers to have one line for the function
  description and more verbose documentation below the parameters

ChangeLog v9->v10:
- pinctrl: EXPORT_SYMBOL needs export.h, folded in a patch
  from Steven Rothwell
- fix pinctrl_register error handling, folded in a patch from
  Axel Lin
- Various fixes to documentation text so that it's consistent.
- Removed pointless comment from drivers/Kconfig
- Removed dependency on SYSFS since we removed the bus in
  v9.
- Renamed hopelessly abbreviated pctldev_* functions to the
  more verbose pinctrl_dev_*
- Drop mutex properly when looking up GPIO ranges
- Return NULL instead of ERR_PTR() errors on registration of
  pin controllers, using cast pointers is fragile. We can
  live without the detailed error codes for sure.

Cc: Stijn Devriendt <highguy@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-10-13 12:49:17 +02:00
Greg Kroah-Hartman 46a9719136 Staging: hv: move hyperv code out of staging directory
After many years wandering the desert, it is finally time for the
Microsoft HyperV code to move out of the staging directory.  Or at least
the core hyperv bus code, and the utility driver, the rest still have
some review to get through by the various subsystem maintainers.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
2011-10-10 22:52:55 -06:00
MyungJoo Ham a3c98b8b2e PM: Introduce devfreq: generic DVFS framework with device-specific OPPs
With OPPs, a device may have multiple operable frequency and voltage
sets. However, there can be multiple possible operable sets and a system
will need to choose one from them. In order to reduce the power
consumption (by reducing frequency and voltage) without affecting the
performance too much, a Dynamic Voltage and Frequency Scaling (DVFS)
scheme may be used.

This patch introduces the DVFS capability to non-CPU devices with OPPs.
DVFS is a techique whereby the frequency and supplied voltage of a
device is adjusted on-the-fly. DVFS usually sets the frequency as low
as possible with given conditions (such as QoS assurance) and adjusts
voltage according to the chosen frequency in order to reduce power
consumption and heat dissipation.

The generic DVFS for devices, devfreq, may appear quite similar with
/drivers/cpufreq.  However, cpufreq does not allow to have multiple
devices registered and is not suitable to have multiple heterogenous
devices with different (but simple) governors.

Normally, DVFS mechanism controls frequency based on the demand for
the device, and then, chooses voltage based on the chosen frequency.
devfreq also controls the frequency based on the governor's frequency
recommendation and let OPP pick up the pair of frequency and voltage
based on the recommended frequency. Then, the chosen OPP is passed to
device driver's "target" callback.

When PM QoS is going to be used with the devfreq device, the device
driver should enable OPPs that are appropriate with the current PM QoS
requests. In order to do so, the device driver may call opp_enable and
opp_disable at the notifier callback of PM QoS so that PM QoS's
update_target() call enables the appropriate OPPs. Note that at least
one of OPPs should be enabled at any time; be careful when there is a
transition.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Mike Turquette <mturquette@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-02 00:19:15 +02:00
Linus Torvalds 184475029a Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (99 commits)
  drivers/virt: add missing linux/interrupt.h to fsl_hypervisor.c
  powerpc/85xx: fix mpic configuration in CAMP mode
  powerpc: Copy back TIF flags on return from softirq stack
  powerpc/64: Make server perfmon only built on ppc64 server devices
  powerpc/pseries: Fix hvc_vio.c build due to recent changes
  powerpc: Exporting boot_cpuid_phys
  powerpc: Add CFAR to oops output
  hvc_console: Add kdb support
  powerpc/pseries: Fix hvterm_raw_get_chars to accept < 16 chars, fixing xmon
  powerpc/irq: Quieten irq mapping printks
  powerpc: Enable lockup and hung task detectors in pseries and ppc64 defeconfigs
  powerpc: Add mpt2sas driver to pseries and ppc64 defconfig
  powerpc: Disable IRQs off tracer in ppc64 defconfig
  powerpc: Sync pseries and ppc64 defconfigs
  powerpc/pseries/hvconsole: Fix dropped console output
  hvc_console: Improve tty/console put_chars handling
  powerpc/kdump: Fix timeout in crash_kexec_wait_realmode
  powerpc/mm: Fix output of total_ram.
  powerpc/cpufreq: Add cpufreq driver for Momentum Maple boards
  powerpc: Correct annotations of pmu registration functions
  ...

Fix up trivial Kconfig/Makefile conflicts in arch/powerpc, drivers, and
drivers/cpufreq
2011-07-25 22:59:39 -07:00
Ohad Ben-Cohen e72542191c virtio: expose for non-virtualization users too
virtio has been so far used only in the context of virtualization,
and the virtio Kconfig was sourced directly by the relevant arch
Kconfigs when VIRTUALIZATION was selected.

Now that we start using virtio for inter-processor communications,
we need to source the virtio Kconfig outside of the virtualization
scope too.

Moreover, some architectures might use virtio for both virtualization
and inter-processor communications, so directly sourcing virtio
might yield unexpected results due to conflicting selections.

The simple solution offered by this patch is to always source virtio's
Kconfig in drivers/Kconfig, and remove it from the appropriate arch
Kconfigs. Additionally, a virtio menu entry has been added so virtio
drivers don't show up in the general drivers menu.

This way anyone can use virtio, though it's arguably less accessible
(and neat!) for virtualization users now.

Note: some architectures (mips and sh) seem to have a VIRTUALIZATION
menu merely for sourcing virtio's Kconfig, so that menu is removed too.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-07-23 16:20:30 +09:30
Linus Torvalds 6d16d6d9bb Merge branch 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  iommu/core: Fix build with INTR_REMAP=y && CONFIG_DMAR=n
  iommu/amd: Don't use MSI address range for DMA addresses
  iommu/amd: Move missing parts to drivers/iommu
  iommu: Move iommu Kconfig entries to submenu
  x86/ia64: intel-iommu: move to drivers/iommu/
  x86: amd_iommu: move to drivers/iommu/
  msm: iommu: move to drivers/iommu/
  drivers: iommu: move to a dedicated folder
  x86/amd-iommu: Store device alias as dev_data pointer
  x86/amd-iommu: Search for existind dev_data before allocting a new one
  x86/amd-iommu: Allow dev_data->alias to be NULL
  x86/amd-iommu: Use only dev_data in low-level domain attach/detach functions
  x86/amd-iommu: Use only dev_data for dte and iotlb flushing routines
  x86/amd-iommu: Store ATS state in dev_data
  x86/amd-iommu: Store devid in dev_data
  x86/amd-iommu: Introduce global dev_data_list
  x86/amd-iommu: Remove redundant device_flush_dte() calls
  iommu-api: Add missing header file

Fix up trivial conflicts (independent additions close to each other) in
drivers/Makefile and include/linux/pci.h
2011-07-22 16:39:42 -07:00
John W. Linville 204d1641d2 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem 2011-07-08 11:03:36 -04:00
Timur Tabi 6db7199407 drivers/virt: introduce Freescale hypervisor management driver
Add the drivers/virt directory, which houses drivers that support
virtualization environments, and add the Freescale hypervisor management
driver.

The Freescale hypervisor management driver provides several services to
drivers and applications related to the Freescale hypervisor:

1. An ioctl interface for querying and managing partitions

2. A file interface to reading incoming doorbells

3. An interrupt handler for shutting down the partition upon receiving the
   shutdown doorbell from a manager partition

4. A kernel interface for receiving callbacks when a managed partition
   shuts down.

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-08 00:21:27 -05:00
Lauro Ramos Venancio 3e256b8f8d NFC: add nfc subsystem core
The NFC subsystem core is responsible for providing the device driver
interface. It is also responsible for providing an interface to the control
operations and data exchange.

Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05 15:26:57 -04:00
Ohad Ben-Cohen ab493a0f0f drivers: iommu: move to a dedicated folder
Create a dedicated folder for iommu drivers, and move the base
iommu implementation over there.

Grouping the various iommu drivers in a single location will help
finding similar problems shared by different platforms, so they
could be solved once, in the iommu framework, instead of solved
differently (or duplicated) in each driver.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2011-06-14 14:47:41 +02:00
Richard Cochran d94ba80ebb ptp: Added a brand new class driver for ptp clocks.
This patch adds an infrastructure for hardware clocks that implement
IEEE 1588, the Precision Time Protocol (PTP). A class driver offers a
registration method to particular hardware clock drivers. Each clock is
presented as a standard POSIX clock.

The ancillary clock features are exposed in two different ways, via
the sysfs and by a character device.

Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-05-23 13:01:00 -07:00
Linus Torvalds 06f4e926d2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1446 commits)
  macvlan: fix panic if lowerdev in a bond
  tg3: Add braces around 5906 workaround.
  tg3: Fix NETIF_F_LOOPBACK error
  macvlan: remove one synchronize_rcu() call
  networking: NET_CLS_ROUTE4 depends on INET
  irda: Fix error propagation in ircomm_lmp_connect_response()
  irda: Kill set but unused variable 'bytes' in irlan_check_command_param()
  irda: Kill set but unused variable 'clen' in ircomm_connect_indication()
  rxrpc: Fix set but unused variable 'usage' in rxrpc_get_transport()
  be2net: Kill set but unused variable 'req' in lancer_fw_download()
  irda: Kill set but unused vars 'saddr' and 'daddr' in irlan_provider_connect_indication()
  atl1c: atl1c_resume() is only used when CONFIG_PM_SLEEP is defined.
  rxrpc: Fix set but unused variable 'usage' in rxrpc_get_peer().
  rxrpc: Kill set but unused variable 'local' in rxrpc_UDP_error_handler()
  rxrpc: Kill set but unused variable 'sp' in rxrpc_process_connection()
  rxrpc: Kill set but unused variable 'sp' in rxrpc_rotate_tx_window()
  pkt_sched: Kill set but unused variable 'protocol' in tc_classify()
  isdn: capi: Use pr_debug() instead of ifdefs.
  tg3: Update version to 3.119
  tg3: Apply rx_discards fix to 5719/5720
  ...

Fix up trivial conflicts in arch/x86/Kconfig and net/mac80211/agg-tx.c
as per Davem.
2011-05-20 13:43:21 -07:00
Russell King 89c0b8e252 clocksource: add common i8253 PIT clocksource
This is based upon both arch/arm/mach-footbridge/isa-timer.c and
arch/x86/kernel/i8253.c.

Acked-by: John Stultz <john.stultz@linaro.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-14 10:29:47 +01:00
Rafał Miłecki 8369ae33b7 bcma: add Broadcom specific AMBA bus driver
Broadcom has released cards based on a new AMBA-based bus type. From a
programming point of view, this new bus type differs from AMBA and does
not use AMBA common registers. It also differs enough from SSB. We
decided that a new bus driver is needed to keep the code clean.

In its current form, the driver detects devices present on the bus and
registers them in the system. It allows registering BCMA drivers for
specified bus devices and provides them basic operations. The bus driver
itself includes two important bus managing drivers: ChipCommon core
driver and PCI(c) core driver. They are early used to allow correct
initialization.

Currently code is limited to supporting buses on PCI(e) devices, however
the driver is designed to be used also on other hosts. The host
abstraction layer is implemented and already used for PCI(e).

Support for PCI(e) hosts is working and seems to be stable (access to
80211 core was tested successfully on a few devices). We can still
optimize it by using some fixed windows, but this can be done later
without affecting any external code. Windows are just ranges in MMIO
used for accessing cores on the bus.

Cc: Greg KH <greg@kroah.com>
Cc: Michael Büsch <mb@bu3sch.de>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: George Kashperko <george@znau.edu.ua>
Cc: Arend van Spriel <arend@broadcom.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Botting <andy@andybotting.com>
Cc: linuxdriverproject <devel@linuxdriverproject.org>
Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10 15:54:54 -04:00
Ohad Ben-Cohen bd9a4c7df2 drivers: hwspinlock: add framework
Add a platform-independent hwspinlock framework.

Hardware spinlock devices are needed, e.g., in order to access data
that is shared between remote processors, that otherwise have no
alternative mechanism to accomplish synchronization and mutual exclusion
operations.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Hari Kanigeri <h-kanigeri2@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17 09:52:03 -08:00
Nicholas Bellinger c66ac9db8d [SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:

High-performance, non-blocking, multithreaded architecture with SIMD
support.

Advanced SCSI feature set:

    * Persistent Reservations (PRs)
    * Asymmetric Logical Unit Assignment (ALUA)
    * Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
    * Full Error Recovery (ERL=0,1,2)
    * Active/active task migration and session continuation (ERL=2)
    * Thin LUN provisioning (UNMAP and WRITE_SAMExx)

Multiprotocol target plugins

Storage media independence:

    * Virtualization of all storage media; transparent mapping of IO to LUNs
    * No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
    * Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.

Standards compliance:

    * Full compliance with IETF (RFC 3720)
    * Full implementation of SPC-4 PRs and ALUA

Significant code cleanups done by Christoph Hellwig.

[jejb: fix up for new block bdev exclusive interface. Minor fixes from
 Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-14 10:12:29 -06:00
Matti J. Aaltonen 0329326e85 NFC: Driver for NXP Semiconductors PN544 NFC chip.
Creates a new "Near Field Communication" subsystem in drivers/nfc.
http://en.wikipedia.org/wiki/Near_Field_Communication is useful ;)

This is a driver for the pn544 NFC device. The driver transfers
ETSI messages between the device and the user space.

Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:19 -08:00
Jean-Christop PLAGNIOL-VILLARD 6d803ba736 ARM: 6483/1: arm & sh: factorised duplicated clkdev.c
factorise some generic infrastructure to assist looking up struct clks
for the ARM & SH architecture.

as the code is identical at 99%

put the arch specific code for allocation as example in asm/clkdev.h

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-26 10:51:04 +00:00
Randy Dunlap 9c8f05c283 MFGPT: move clocksource menu
Move the CS5535 MFGPT hrtimer kconfig option to be with the other MFGPT
options.  This makes it easier to find and also removes it from the main
"Device Drivers" menu, where it should not have been.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Andres Salomon <dilinger@collabora.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:28 -08:00
Stefan Richter 5d7db0499e firewire, ieee1394: update Kconfig help
Update the Kconfig help texts of both stacks to encourage a general move
from the older to the newer drivers.  However, do not label ieee1394 as
"Obsolete" yet, as the newer drivers have not been deployed as default
stack in the majority of Linux distributions yet, and those who start
doing so now may still want to install the old drivers as fallback for
unforeseen issues.

Since Linux 2.6.32, FireWire audio devices can be driven by the newer
firewire driver stack too, hence remove an outdated comment about audio
devices.  Also remove comments about library versions since the 2nd
generation of libraw1394 and libdc1394 is now in common use; details on
library versions can be read at the wiki link from the help texts.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-29 19:58:17 +01:00
Andres Salomon c30d7d2b99 cs5535: add a generic clock event MFGPT driver
This is based on the old code in arch/x86/kernel/mfgpt_32.c, but is
modular and not Geode-specific.  There's no reason why the clock event
device needs to be registered so early at boot; the clockevent code is
perfectly capable of dynamic switching.

[akpm@linux-foundation.org: add linux/irq.h include]
Signed-off-by: Andres Salomon <dilinger@collabora.co.uk>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:28 -08:00
Michael Roth fa3012318b Kconfig: Remove useless and sometimes wrong comments
Additionally, some excessive newlines removed.

Signed-off-by: Michael Roth <mroth@nessie.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-09 09:40:56 +01:00
Rodolfo Giometti eae9d2ba0c LinuxPPS: core support
This patch adds the kernel side of the PPS support currently named
"LinuxPPS".

PPS means "pulse per second" and a PPS source is just a device which
provides a high precision signal each second so that an application can
use it to adjust system clock time.

Common use is the combination of the NTPD as userland program with a GPS
receiver as PPS source to obtain a wallclock-time with sub-millisecond
synchronisation to UTC.

To obtain this goal the userland programs shoud use the PPS API
specification (RFC 2783 - Pulse-Per-Second API for UNIX-like Operating
Systems, Version 1.0) which in part is implemented by this patch.  It
provides a set of chars devices, one per PPS source, which can be used to
get the time signal.  The RFC's functions can be implemented by accessing
to these char devices.

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg KH <greg@kroah.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 13:04:04 -07:00
Florian Fainelli 55e331cf7e drivers: add support for the TI VLYNQ bus
Add support for the TI VLYNQ high-speed, serial and packetized bus.

This bus allows external devices to be connected to the System-on-Chip and
appear in the main system memory just like any memory mapped peripheral.
It is widely used in TI's networking and multimedia SoC, including the AR7
SoC.

Signed-off-by: Eugene Konev <ejka@imfi.kspu.ru>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:52 -07:00
Len Brown 41b16dce39 create drivers/platform/x86/ from drivers/misc/
Move x86 platform specific drivers from drivers/misc/
to a new home under drivers/platform/x86/.

The community has been maintaining x86 vendor-specific
platform specific drivers under /drivers/misc/ for a few years.
The oldest ones started life under drivers/acpi.
They moved out of drivers/acpi/ because they don't actually
implement the ACPI specification, but either simply
use ACPI, or implement vendor-specific ACPI extensions.

In the future we anticipate...
drivers/misc/ will go away.
other architectures will create drivers/platform/<arch>

Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-19 04:42:32 -05:00
Mark Brown f49d81a899 regulator: Build on non-ARM platforms
When the regulator API was merged it was added to the separate Kconfig
which ARM uses for drivers but not the generic one in drivers/.  Since
there is nothing ARM-specific about the API add it there too.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-28 21:47:17 +00:00
David Vrabel 61e0e79ee3 Merge branch 'master' into for-upstream
Conflicts:

	Documentation/ABI/testing/sysfs-bus-usb
	drivers/Makefile
2008-10-20 16:07:19 +01:00
Greg Kroah-Hartman 3504558913 Staging: add Kconfig entries and Makefile infrastructure
This hooks up the drivers/staging directory to the build system

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-10 15:31:06 -07:00
Greg Kroah-Hartman 2f86c3e67d uwb: add the UWB stack (build system)
The Kbuild and Kconfig files.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:25 +01:00
Samuel Thibault f7511d5f66 Basic braille screen reader support
This adds a minimalistic braille screen reader support.  This is meant to
be used by blind people e.g.  on boot failures or when / cannot be mounted
etc and thus the userland screen readers can not work.

[akpm@linux-foundation.org: fix exports]
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Jiri Kosina <jikos@jikos.cz>
Cc: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Alan Cox <alan@redhat.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:52 -07:00
Jeremy Fitzhardinge 1775826cee xen: add balloon driver
The balloon driver allows memory to be dynamically added or removed from the domain,
in order to allow host memory to be balanced between multiple domains.

This patch introduces the Xen balloon driver, though it currently only
allows a domain to be shrunk from its initial size (and re-grown back to
that size).  A later patch will add the ability to grow a domain beyond
its initial size.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24 23:57:33 +02:00
Alex Dubov baf8532a14 memstick: initial commit for Sony MemoryStick support
Sony MemoryStick cards are used in many products manufactured by Sony.
They are available both as storage and as IO expansion cards.  Currently,
only MemoryStick Pro storage cards are supported via TI FlashMedia
MemoryStick interface.

[mboton@gmail.com: biuld fix]
[akpm@linux-foundation.org: build fix]
Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Miguel Boton <mboton@gmail.co>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-09 11:08:34 -08:00
Len Brown 26b6f22366 Merge branches 'release' and 'menlo' into release
Conflicts:

	drivers/acpi/video.c

Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-07 03:18:04 -05:00
David Brownell a9c5fff542 gpiolib: add drivers/gpio directory
Add an empty drivers/gpio directory for gpiolib infrastructure and GPIO
expanders.  It will be populated by later patches.

This won't be the only place to hold such gpio_chip code.  Many external chips
add a few GPIOs as secondary functionality (such as MFD drivers) and platform
code frequently needs to closely integrate GPIO and IRQ support.

This is placed *early* in the build/link sequence since it's common for other
drivers to depend on GPIOs to do their work, so they must be initialized early
in the device_initcall() sequence.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: Eric Miao <eric.miao@marvell.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:12 -08:00
Anthony Liguori 0ad07ec1fd virtio: Put the virtio under the virtualization menu
This patch moves virtio under the virtualization menu and changes virtio
devices to not claim to only be for lguest.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04 23:50:05 +11:00
Zhang Rui 203d3d4aa4 the generic thermal sysfs driver
The Generic Thermal sysfs driver for thermal management.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Thomas Sujith <sujith.thomas@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 23:12:19 -05:00
Avi Kivity edf884172e KVM: Move arch dependent files to new directory arch/x86/kvm/
This paves the way for multiple architecture support.  Note that while
ioapic.c could potentially be shared with ia64, it is also moved.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 18:01:18 +02:00
Rusty Russell ec3d41c4db Virtio interface
This attempts to implement a "virtual I/O" layer which should allow
common drivers to be efficiently used across most virtual I/O
mechanisms.  It will no-doubt need further enhancement.

The virtio drivers add buffers to virtio queues; as the buffers are consumed
the driver "interrupt" callbacks are invoked.

There is also a generic implementation of config space which drivers can query
to get setup information from the host.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Dor Laor <dor.laor@qumranet.com>
Cc: Arnd Bergmann <arnd@arndb.de>
2007-10-23 15:49:54 +10:00
Rusty Russell 9525ca0286 Consolidate host virtualization support under Virtualization menu
Move lguest under the virtualization menu.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Avi Kivity <avi@qumranet.com>
2007-10-23 15:49:47 +10:00
Wim Van Sebroeck b7e04f8c61 mv watchdog tree under drivers
move watchdog tree from drivers/char/watchdog to drivers/watchdog.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-10-18 10:39:03 +00:00
Shannon Nelson 7589670f37 DCA: Add Direct Cache Access driver
Direct Cache Access (DCA) is a method for warming the CPU cache before data
is used, with the intent of lessening the impact of cache misses.  This
patch adds a manager and interface for matching up client requests for DCA
services with devices that offer DCA services.

In order to use DCA, a module must do bus writes with the appropriate tag
bits set to trigger a cache read for a specific CPU.  However, different
CPUs and chipsets can require different sets of tag bits, and the methods
for determining the correct bits may be simple hardcoding or may be a
hardware specific magic incantation.  This interface is a way for DCA
clients to find the correct tag bits for the targeted CPU without needing
to know the specifics.

    [Dave Miller] use DEFINE_SPINLOCK()

Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:09 -07:00