Commit Graph

38 Commits

Author SHA1 Message Date
Darrick J. Wong 1a51e068c9 hwmon: (lm90) Document support for the MAX6648/6692 chips
Update documentation to prevent further confusion/duplication.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-12 13:36:38 +01:00
Jean Delvare 97ae60bb38 hwmon: (lm90) Add support for the LM99 16 degree offset
The LM99 differs from the LM86, LM89 and LM90 in that it reports
remote temperatures (temp2) 16 degrees lower than they really are. So
far we have been cheating and handled this in userspace but it really
should be handled by the driver directly.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
2008-10-26 17:04:39 +01:00
Jean Delvare ec38fa2b35 hwmon: (lm90) Fix handling of hysteresis value
There are several problems in the way the hysteresis value is handled
by the lm90 driver:

* In show_temphyst(), specific handling of the MAX6646 is missing, so
  the hysteresis is reported incorrectly if the critical temperature
  is over 127 degrees C.
* In set_temphyst(), the new hysteresis register value is written to
  the chip but data->temp_hyst isn't updated accordingly, so there is
  a short period of time (up to 2 seconds) where the old hystereris
  value will be returned while the new one is already active.
* In set_temphyst(), the critical temperature which is used as a base
  to compute the value of the hysteresis register lacks
  device-specific handling. As a result, the value of the hysteresis
  register might be incorrect for the ADT7461 and MAX6646 chips.

Fix these 3 bugs.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Cc: Nate Case <ncase@xes-inc.com>
2008-10-26 17:04:39 +01:00
Jean Delvare 4b4e7a72fd hwmon: (lm90) Don't spam the kernel log
Degrade the "Unsupported chip" message from info to debug level.
There's nothing wrong with this, so no need to bother the user.
Also make the message slightly more descriptive.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
2008-10-17 17:51:11 +02:00
Ben Hutchings 271dabf5bb hwmon: (lm90) Support MAX6646, MAX6647 and MAX6649
These Maxim chips are similar to MAX6657 but use unsigned temperature
values to allow for readings up to 145 degrees.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17 17:51:11 +02:00
Ben Hutchings 9d4d383422 hwmon: (lm90) Rename temperature conversion functions to match usage
The encoding of temperatures varies between chips and modes.  So do not
use "temp1" or "temp2" in the names of the conversion functions, but
specify the encoding.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Martyn Welch <martyn.welch@gefanuc.com>
2008-10-17 17:51:10 +02:00
Nate Case 23b2d4778a hwmon: (lm90) Support ADT7461 in extended mode
Support ADT7461 in extended temperature range mode, which will change
the range of readings from 0..127 to -64..191 degC.  Adjust the
register conversion functions accordingly.

Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Martyn Welch <martyn.welch@gefanuc.com>
2008-10-17 17:51:10 +02:00
Nate Case cea50fe2fd hwmon: (lm90) Convert some macros to static functions
Use static functions instead of the TEMPx_FROM_REG* and TEMPx_TO_REG*
macros.  This will ensure type safety and eliminate any side effects
from arguments passed in since the macros referenced 'val' multiple
times.  This change should not affect functionality.

Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Martyn Welch <martyn.welch@gefanuc.com>
2008-10-17 17:51:10 +02:00
Jean Delvare a874a10cf0 hwmon: (lm90) Update datasheet links
Update the links to the datasheet of some of the devices supported by
the lm90 driver. Also remove the links from the driver itself, so that
we don't have to update them twice each time they change.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
2008-10-17 17:51:10 +02:00
Jean Delvare 5f502a834a hwmon: (lm90) Don't access nonexistent registers on Maxim chips
The Maxim chips supported by the lm90 driver have 8-bit high and low
remote limit values, not 11-bit as the other chips have. So stop reading
from and writing to registers that do not exist on these chips. Also
round the limit values set by the user properly.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
2008-10-17 17:51:09 +02:00
Jean Delvare f65e17086f hwmon: (lm90) Support the extra resolution bits of MAX6657
The Maxim MAX6657, MAX6658 and MAX6659 have extra resolution bits for
the local temperature measurement. Let the lm90 driver read them and
export them to user-space.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
2008-10-17 17:51:09 +02:00
Jean Delvare 6388a388ff hwmon: (lm90) Move 16-bit value read to a separate function
Move the code which aggregates two 8-bit register values into a 16-bit
value to a separate function. We'll need to do it a second time soon and
I don't want to duplicate the code.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
2008-10-17 17:51:09 +02:00
Jean Delvare 9b0e852692 hwmon: (lm90) Convert to a new-style i2c driver
The new-style lm90 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16 19:30:15 +02:00
Mark M. Hoffman 25e9c86d5a hwmon: normal_i2c arrays should be const
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-18 21:58:15 -05:00
Jean Delvare 7b501b1f53 hwmon: Discard useless I2C driver IDs
Many I2C hwmon drivers define a driver ID but no other code references
these, meaning that they are useless. Discard them, along with a few
IDs which are defined but never used at all.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:44 -05:00
Jean Delvare e0ae87a49c hwmon: (lm90) Use generic i2c reads during detection
As indirectly reported by Olof Johansson, the lm90 driver uses a
custom i2c read function even during detection, at which point we
don't know yet what device we're talking with. It would make more
sense to only use the generic i2c read function at this point, so
that we don't log irrelevant errors on misdetection.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:41 -05:00
Jean Delvare 69f2f96d9c hwmon: (lm90) Export temperature offset values
Now that we have standard sysfs names to export temperature offset
values, add this feature to the lm90 driver. All supported chips
except the MAX6657, MAX6658 and MAX6659 support it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-10-09 22:56:31 -04:00
Tony Jones 1beeffe433 hwmon: Convert from class_device to device
Convert from class_device to device for hwmon_device_register/unregister

Signed-off-by: Tony Jones <tonyj@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-10-09 22:56:30 -04:00
Guillaume Chazarain f5744e3775 hwmon: Fix regression caused by typo in lm90.c
The commit http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=32c82a934759b2c9939c9e25865c2d7d1204b9e8
broke lm90 for my (Asus V6VA) laptop.

Before 2.6.23-rc1 and with the following patch, I get:

[g ~]$ sensors
max6657-i2c-0-4c
Adapter: SMBus I801 adapter at 0400
M/B Temp:    +64°C  (low  =    +0°C, high =  +127°C)
CPU Temp:  +78.9°C  (low  = +73.2°C, high = +88.2°C)
M/B Crit:   +105°C  (hyst =   +95°C)
CPU Crit:   +105°C  (hyst =   +95°C)

Which regressed into:

[g ~]$ sensors
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
zsh: 2701 exit 1     sensors

and dmesg contains:

i2c-adapter i2c-0: Unsupported chip (man_id=0x4D, chip_id=0x4D).

It seems to be a typo, as address 0X4F is mentionned nowhere else in the file,
and my chip is actually at 0x4C.

Signed-off-by: Guillaume Chazarain <guichaz@yahoo.fr>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-30 21:10:34 -04:00
Jean Delvare 7817a39e65 hwmon: Fault files naming convention
We have the following naming convention documented in
Documentation/hwmon/sysfs-interface for fault files:

in[0-*]_input_fault
fan[1-*]_input_fault
temp[1-*]_input_fault

Some drivers follow this convention (lm63, lm83, lm90, smsc47m192).
However some drivers omit the "input" part and create files named
fan1_fault (pc87427) or temp1_fault (dme1737). And the new "generic"
libsensors follows this second (non-standard) convention, so it fails
to report fault conditions for drivers which follow the standard.

We want a single naming scheme, and everyone seems to prefer the
shorter variant, so let's go for it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19 14:22:12 -04:00
Rainer Birkenmaier 32c82a9347 hwmon/lm90: Add support for the Maxim MAX6680/MAX6681
Signed-off-by: Rainer Birkenmaier <rainer.birkenmaier@siemens.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19 14:22:12 -04:00
Jean Delvare 0966415d72 hwmon/lm90: Spelling fix: explicitly
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19 14:22:11 -04:00
Jean Delvare 0e39e01c90 hwmon: Fix unchecked return status, batch 4
hwmon: Fix unchecked return status, batch 4

Fix up some hwmon drivers so that they no longer ignore return status
from device_create_file().

Note: f71805f actually checked the status from device_create_file
already. However it did not remove the files on device destruction.
It was also an opportunity to use sysfs_create/remove_group instead
of hand-made loops. This makes the changes much more important but
I think the result is worth it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28 15:31:18 -07:00
Jean Delvare 2d45771e6e hwmon: Add individual alarm files to 4 drivers
hwmon: Add individual alarm files to 4 drivers

Add individual sysfs files for all f71805f, lm63, lm83 and lm90 alarm
and fault conditions. This is a requirement for the planned
chip-independent libsensors. Almost all other hwmon drivers will need
the same improvement.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28 15:31:15 -07:00
Ingo Molnar 9a61bf6300 [PATCH] hwmon: Semaphore to mutex conversions
convert drivers/hwmon/*.c semaphore use to mutexes.

the conversion was generated via scripts, and the result was validated
automatically via a script as well.

all affected hwmon drivers were build-tested.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23 14:21:52 -08:00
Greg Kroah-Hartman 2b48716d1d [PATCH] I2C: Remove .owner setting from i2c_driver as it's no longer needed
Now that i2c_add_driver() doesn't need the module owner to be set by
hand, we can delete it from the drivers.  This patch catches all of the
drivers that I found in the current tree (if a driver sets the .owner by
hand, it's not a problem, just not needed.)

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Jean Delvare <khali@linux-fr.org>
2006-01-05 22:16:25 -08:00
Laurent Riffard cdaf79349c [PATCH] i2c: Drop i2c_driver.{owner,name}, 3 of 11
We should use the i2c_driver.driver's .name and .owner fields
instead of the i2c_driver's ones.

This patch updates the hwmon drivers.

Signed-off-by: Laurent Riffard <laurent.riffard@free.fr>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-05 22:16:23 -08:00
Jean Delvare 8a9947552d [PATCH] i2c: Drop i2c_driver.flags, 2 of 3
Just about every i2c chip driver sets the I2C_DF_NOTIFY flag, so we
can simply make it the default and drop the flag. If any driver really
doesn't want to be notified when i2c adapters are added, that driver
can simply omit to set .attach_adapter. This approach is also more
robust as it prevents accidental NULL pointer dereferences.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-05 22:16:21 -08:00
Jean Delvare 90209b42d0 [PATCH] hwmon: lm90 documentation update
Update the I2C addresses for the ADM1032 and ADT7461 chips.
Also update the links to the Analog Devices web site.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 14:02:14 -07:00
Jean Delvare c3df5806cd [PATCH] hwmon: Add PEC support to the lm90 driver
Add PEC support to the lm90 driver. Only the ADM1032 chip supports it,
and in a rather tricky way, which is why this patch comes with
documentation reinforcements. At least, this demonstrates that the new
PEC support logic in i2c-core can properly deal with chips with partial
PEC support.

As enabling PEC causes a significant performance drop, it can be
disabled through a sysfs file (unsurprisingly named "pec").

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 14:02:14 -07:00
Jean Delvare 8256fe0f40 [PATCH] hwmon: Separate the lm90 register read function
Preparatory patch to add PEC support to the lm90 driver. We need a
centralized function to read register values, where the PEC code will
be later inserted. A positive side effect is that read errors are now
handled properly.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 14:02:14 -07:00
Deepak Saxena ba9c2e8d15 [PATCH] hwmon: kzalloc conversion
Use kzalloc instead of kmalloc+memset in all hardware monitoring
drivers.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 14:02:12 -07:00
Jean Delvare f4b5026120 [PATCH] hwmon: hwmon vs i2c, second round (06/11)
The only thing left in i2c-sensor.h are module parameter definition
macros. It's only an extension of what i2c.h offers, and this extension
is not sensors-specific. As a matter of fact, a few non-sensors drivers
use them. So we better merge them in i2c.h, and get rid of i2c-sensor.h
altogether.

Signed-off-by: Jean Delvare <khali@linux-fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05 09:14:21 -07:00
Jean Delvare 2ed2dc3c11 [PATCH] hwmon: hwmon vs i2c, second round (04/11)
i2c_probe and i2c_detect now do the exact same thing and operate on
the same data structure, so we can have everyone call i2c_probe.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05 09:14:20 -07:00
Jean Delvare 7bef559455 [PATCH] I2C: refactor message in i2c_detach_client
We could refactor the error message 34 different i2c drivers print if
i2c_detach_client() fails in this function itself. Saves quite a few
lines of code. Documentation is updated to reflect that change.

Note that this patch should be applied after Rudolf Marek's w83792d
patches.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05 09:14:14 -07:00
Jean Delvare 5071860aba [PATCH] I2C: Separate non-i2c hwmon drivers from i2c-core (7/9)
Kill normal_isa in header files, documentation and all chip drivers, as
it is no more used.

normal_i2c could be renamed to normal, but I decided not to do so at the
moment, so as to limit the number of changes. This might be done later
as part of the i2c_probe/i2c_detect merge.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05 09:14:12 -07:00
Mark M. Hoffman 943b0830ce [PATCH] I2C hwmon: add hwmon sysfs class to drivers
This patch modifies sensors chip drivers to make use of the new
sysfs class "hwmon".

Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05 09:14:08 -07:00
Jean Delvare 8d5d45fb14 [PATCH] I2C: Move hwmon drivers (2/3)
Part 2: Move the driver files themselves.

Note that the patch "adds trailing whitespace", because it does move the
files as-is, and some files happen to have trailing whitespace.

From: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-11 14:42:50 -07:00