Commit Graph

15 Commits

Author SHA1 Message Date
Ard Biesheuvel c821f6ab2e crypto: skcipher - introduce walksize attribute for SIMD algos
In some cases, SIMD algorithms can only perform optimally when
allowed to operate on multiple input blocks in parallel. This is
especially true for bit slicing algorithms, which typically take
the same amount of time processing a single block or 8 blocks in
parallel. However, other SIMD algorithms may benefit as well from
bigger strides.

So add a walksize attribute to the skcipher algorithm definition, and
wire it up to the skcipher walk API. To avoid confusion between the
skcipher and AEAD attributes, rename the skcipher_walk chunksize
attribute to 'stride', and set it from the walksize (in the skcipher
case) or from the chunksize (in the AEAD case).

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-30 19:52:47 +08:00
Stephan Mueller 0184cfe72d crypto: doc - fix source comments for Sphinx
Update comments to avoid any complaints from Sphinx during compilation.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-12-13 16:38:05 -07:00
Herbert Xu 5c562338de crypto: skcipher - Add comment for skcipher_alg->base
This patch adds a missing comment for the base parameter in struct
skcipher_alg.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-19 15:42:42 +08:00
Herbert Xu 3a01d0ee2b crypto: skcipher - Remove top-level givcipher interface
This patch removes the old crypto_grab_skcipher helper and replaces
it with crypto_grab_skcipher2.

As this is the final entry point into givcipher this patch also
removes all traces of the top-level givcipher interface, including
all implicit IV generators such as chainiv.

The bottom-level givcipher interface remains until the drivers
using it are converted.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-18 17:35:46 +08:00
Herbert Xu 4e6c3df4d7 crypto: skcipher - Add low-level skcipher interface
This patch allows skcipher algorithms and instances to be created
and registered with the crypto API.  They are accessible through
the top-level skcipher interface, along with ablkcipher/blkcipher
algorithms and instances.

This patch also introduces a new parameter called chunk size
which is meant for ciphers such as CTR and CTS which ostensibly
can handle arbitrary lengths, but still behave like block ciphers
in that you can only process a partial block at the very end.

For these ciphers the block size will continue to be set to 1
as it is now while the chunk size will be set to the underlying
block size.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-18 17:35:36 +08:00
Eric Biggers 6eae29e7e7 crypto: doc - document correct return value for request allocation
Signed-off-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-04-15 22:35:44 +08:00
Herbert Xu 92b3cad3af crypto: skcipher - Fix driver name helper
The helper crypto_skcipher_driver_name was returning the alg
name and not the driver name.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-02-06 15:33:13 +08:00
Herbert Xu a2d382a4f1 crypto: skcipher - Add helper to retrieve driver name
This patch adds the helper crypto_skcipher_driver_name which returns
the driver name of the alg object for a given tfm.  This is needed by
ecryptfs.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-27 20:35:22 +08:00
Herbert Xu 1aaa753d91 crypto: skcipher - Add helper to zero stack request
As the size of an skcipher_request is variable, it's awkward to
zero it explicitly.  This patch adds a helper to do that which
should be used when it is created on the stack.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-25 22:42:12 +08:00
Herbert Xu 973fb3fb50 crypto: skcipher - Add default key size helper
While converting ecryptfs over to skcipher I found that it needs
to pick a default key size if one isn't given.  Rather than having
it poke into the guts of the algorithm to get max_keysize, let's
provide a helper that is meant to give a sane default (just in
case we ever get an algorithm that has no maximum key size).

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-25 22:42:11 +08:00
Herbert Xu a1383cd86a crypto: skcipher - Add crypto_skcipher_has_setkey
This patch adds a way for skcipher users to determine whether a key
is required by a transform.

Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-18 18:16:12 +08:00
Herbert Xu 7a7ffe65c8 crypto: skcipher - Add top-level skcipher interface
This patch introduces the crypto skcipher interface which aims
to replace both blkcipher and ablkcipher.

It's very similar to the existing ablkcipher interface.  The
main difference is the removal of the givcrypt interface.  In
order to make the transition easier for blkcipher users, there
is a helper SKCIPHER_REQUEST_ON_STACK which can be used to place
a request on the stack for synchronous transforms.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-21 22:21:19 +08:00
Mark Rustad 3e3dc25fe7 crypto: Resolve shadow warnings
Change formal parameters to not clash with global names to
eliminate many W=2 warnings.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-08-01 22:35:55 +08:00
Herbert Xu 03bf712fb4 [CRYPTO] skcipher: Add top-level givencrypt/givdecrypt calls
This patch finally makes the givencrypt/givdecrypt operations available
to users by adding crypto_skcipher_givencrypt and crypto_skcipher_givdecrypt.
A suite of helpers to allocate and fill in the request is also available.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:49 +11:00
Herbert Xu 61da88e2b8 [CRYPTO] skcipher: Add givcrypt operations and givcipher type
Different block cipher modes have different requirements for intialisation
vectors.  For example, CBC can use a simple randomly generated IV while
modes such as CTR must use an IV generation mechanisms that give a stronger
guarantee on the lack of collisions.  Furthermore, disk encryption modes
have their own IV generation algorithms.

Up until now IV generation has been left to the users of the symmetric
key cipher API.  This is inconvenient as the number of block cipher modes
increase because the user needs to be aware of which mode is supposed to
be paired with which IV generation algorithm.

Therefore it makes sense to integrate the IV generation into the crypto
API.  This patch takes the first step in that direction by creating two
new ablkcipher operations, givencrypt and givdecrypt that generates an
IV before performing the actual encryption or decryption.

The operations are currently not exposed to the user.  That will be done
once the underlying functionality has actually been implemented.

It also creates the underlying givcipher type.  Algorithms that directly
generate IVs would use it instead of ablkcipher.  All other algorithms
(including all existing ones) would generate a givcipher algorithm upon
registration.  This givcipher algorithm will be constructed from the geniv
string that's stored in every algorithm.  That string will locate a template
which is instantiated by the blkcipher/ablkcipher algorithm in question to
give a givcipher algorithm.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:43 +11:00