Commit Graph

271 Commits

Author SHA1 Message Date
Parag Warudkar 9883a13c72 [PATCH] selinux: fix selinux_netlbl_inode_permission() locking
do not call a sleeping lock API in an RCU read section.
lock_sock_nested can sleep, its BH counterpart doesn't.
selinux_netlbl_inode_permission() needs to use the BH counterpart
unconditionally.

Compile tested.

From: Ingo Molnar <mingo@elte.hu>

added BH disabling, because this function can be called from non-atomic
contexts too, so a naked bh_lock_sock() would be deadlock-prone.

Boot-tested the resulting kernel.

Signed-off-by: Parag Warudkar <paragw@paragw.zapto.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-02 13:32:21 -08:00
Vadim Lobanov bbea9f6966 [PATCH] fdtable: Make fdarray and fdsets equal in size
Currently, each fdtable supports three dynamically-sized arrays of data: the
fdarray and two fdsets.  The code allows the number of fds supported by the
fdarray (fdtable->max_fds) to differ from the number of fds supported by each
of the fdsets (fdtable->max_fdset).

In practice, it is wasteful for these two sizes to differ: whenever we hit a
limit on the smaller-capacity structure, we will reallocate the entire fdtable
and all the dynamic arrays within it, so any delta in the memory used by the
larger-capacity structure will never be touched at all.

Rather than hogging this excess, we shouldn't even allocate it in the first
place, and keep the capacities of the fdarray and the fdsets equal.  This
patch removes fdtable->max_fdset.  As an added bonus, most of the supporting
code becomes simpler.

Signed-off-by: Vadim Lobanov <vlobanov@speakeasy.net>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:57:22 -08:00
Josef Sipek 3d5ff529ea [PATCH] struct path: convert selinux
Signed-off-by: Josef Sipek <jsipek@fsl.cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:49 -08:00
Peter Zijlstra 24ec839c43 [PATCH] tty: ->signal->tty locking
Fix the locking of signal->tty.

Use ->sighand->siglock to protect ->signal->tty; this lock is already used
by most other members of ->signal/->sighand.  And unless we are 'current'
or the tasklist_lock is held we need ->siglock to access ->signal anyway.

(NOTE: sys_unshare() is broken wrt ->sighand locking rules)

Note that tty_mutex is held over tty destruction, so while holding
tty_mutex any tty pointer remains valid.  Otherwise the lifetime of ttys
are governed by their open file handles.  This leaves some holes for tty
access from signal->tty (or any other non file related tty access).

It solves the tty SLAB scribbles we were seeing.

(NOTE: the change from group_send_sig_info to __group_send_sig_info needs to
       be examined by someone familiar with the security framework, I think
       it is safe given the SEND_SIG_PRIV from other __group_send_sig_info
       invocations)

[schwidefsky@de.ibm.com: 3270 fix]
[akpm@osdl.org: various post-viro fixes]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Alan Cox <alan@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:38 -08:00
Peter Zijlstra 6cfd76a26d [PATCH] lockdep: name some old style locks
Name some of the remaning 'old_style_spin_init' locks

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:36 -08:00
Eric Sesterhenn 48ad504ee7 [PATCH] security/keys/*: user kmemdup()
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:25 -08:00
Christoph Lameter e18b890bb0 [PATCH] slab: remove kmem_cache_t
Replace all uses of kmem_cache_t with struct kmem_cache.

The patch was generated using the following script:

	#!/bin/sh
	#
	# Replace one string by another in all the kernel sources.
	#

	set -e

	for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do
		quilt add $file
		sed -e "1,\$s/$1/$2/g" $file >/tmp/$$
		mv /tmp/$$ $file
		quilt refresh
	done

The script was run like this

	sh replace kmem_cache_t "struct kmem_cache"

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:25 -08:00
Christoph Lameter e94b176609 [PATCH] slab: remove SLAB_KERNEL
SLAB_KERNEL is an alias of GFP_KERNEL.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:24 -08:00
Christoph Lameter 54e6ecb239 [PATCH] slab: remove SLAB_ATOMIC
SLAB_ATOMIC is an alias of GFP_ATOMIC

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:24 -08:00
David Howells 9db7372445 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	drivers/ata/libata-scsi.c
	include/linux/libata.h

Futher merge of Linus's head and compilation fixups.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05 17:01:28 +00:00
David Howells 4c1ac1b491 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	drivers/infiniband/core/iwcm.c
	drivers/net/chelsio/cxgb2.c
	drivers/net/wireless/bcm43xx/bcm43xx_main.c
	drivers/net/wireless/prism54/islpci_eth.c
	drivers/usb/core/hub.h
	drivers/usb/input/hid-core.c
	net/core/netpoll.c

Fix up merge failures with Linus's head and fix new compilation failures.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05 14:37:56 +00:00
Al Viro 87fcd70d98 [PATCH] selinux endianness annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-04 19:32:44 -08:00
James Morris 6cbda6b6e2 Rename class_destroy to avoid namespace conflicts.
We're seeing increasing namespace conflicts between the global
class_destroy() function declared in linux/device.h, and the private
function in the SELinux core code.  This patch renames the SELinux
function to cls_destroy() to avoid this conflict.

Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02 21:31:39 -08:00
Paul Moore 0275276035 NetLabel: convert to an extensibile/sparse category bitmap
The original NetLabel category bitmap was a straight char bitmap which worked
fine for the initial release as it only supported 240 bits due to limitations
in the CIPSO restricted bitmap tag (tag type 0x01).  This patch converts that
straight char bitmap into an extensibile/sparse bitmap in order to lay the
foundation for other CIPSO tag types and protocols.

This patch also has a nice side effect in that all of the security attributes
passed by NetLabel into the LSM are now in a format which is in the host's
native byte/bit ordering which makes the LSM specific code much simpler; look
at the changes in security/selinux/ss/ebitmap.c as an example.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02 21:31:36 -08:00
James Morris bb22f58087 Compile fix for "peer secid consolidation for external network labeling"
Use a forward declaration instead of dragging in skbuff.h and
related junk.

Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02 21:24:16 -08:00
Paul Moore 3de4bab5b9 SELinux: peer secid consolidation for external network labeling
Now that labeled IPsec makes use of the peer_sid field in the
sk_security_struct we can remove a lot of the special cases between labeled
IPsec and NetLabel.  In addition, create a new function,
security_skb_extlbl_sid(), which we can use in several places to get the
security context of the packet's external label which allows us to further
simplify the code in a few places.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02 21:24:14 -08:00
Paul Moore 9f2ad66509 NetLabel: SELinux cleanups
This patch does a lot of cleanup in the SELinux NetLabel support code.  A
summary of the changes include:

* Use RCU locking for the NetLabel state variable in the skk_security_struct
  instead of using the inode_security_struct mutex.
* Remove unnecessary parameters in selinux_netlbl_socket_post_create().
* Rename selinux_netlbl_sk_clone_security() to
  selinux_netlbl_sk_security_clone() to better fit the other NetLabel
  sk_security functions.
* Improvements to selinux_netlbl_inode_permission() to help reduce the cost of
  the common case.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02 21:24:13 -08:00
Paul Moore 701a90bad9 NetLabel: make netlbl_lsm_secattr struct easier/quicker to understand
The existing netlbl_lsm_secattr struct required the LSM to check all of the
fields to determine if any security attributes were present resulting in a lot
of work in the common case of no attributes.  This patch adds a 'flags' field
which is used to indicate which attributes are present in the structure; this
should allow the LSM to do a quick comparison to determine if the structure
holds any security attributes.

Example:

 if (netlbl_lsm_secattr->flags)
	/* security attributes present */
 else
	/* NO security attributes present */

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02 21:24:07 -08:00
Thomas Graf 6051e2f4fb [IPv6] prefix: Convert RTM_NEWPREFIX notifications to use the new netlink api
RTM_GETPREFIX is completely unused and is thus removed.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02 21:22:45 -08:00
James Morris 2ee92d46c6 [SELinux]: Add support for DCCP
This patch implements SELinux kernel support for DCCP
(http://linux-net.osdl.org/index.php/DCCP), which is similar in
operation to TCP in terms of connected state between peers.

The SELinux support for DCCP is thus modeled on existing handling of
TCP.

A new DCCP socket class is introduced, to allow protocol
differentation.  The permissions for this class inherit all of the
socket permissions, as well as the current TCP permissions (node_bind,
name_bind etc). IPv4 and IPv6 are supported, although labeled
networking is not, at this stage.

Patches for SELinux userspace are at:
http://people.redhat.com/jmorris/selinux/dccp/user/

I've performed some basic testing, and it seems to be working as
expected.  Adding policy support is similar to TCP, the only real
difference being that it's a different protocol.

Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02 21:22:24 -08:00
Venkat Yekkirala 67f83cbf08 SELinux: Fix SA selection semantics
Fix the selection of an SA for an outgoing packet to be at the same
context as the originating socket/flow. This eliminates the SELinux
policy's ability to use/sendto SAs with contexts other than the socket's.

With this patch applied, the SELinux policy will require one or more of the
following for a socket to be able to communicate with/without SAs:

1. To enable a socket to communicate without using labeled-IPSec SAs:

allow socket_t unlabeled_t:association { sendto recvfrom }

2. To enable a socket to communicate with labeled-IPSec SAs:

allow socket_t self:association { sendto };
allow socket_t peer_sa_t:association { recvfrom };

Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02 21:21:34 -08:00
Venkat Yekkirala 6b877699c6 SELinux: Return correct context for SO_PEERSEC
Fix SO_PEERSEC for tcp sockets to return the security context of
the peer (as represented by the SA from the peer) as opposed to the
SA used by the local/source socket.

Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02 21:21:33 -08:00
Venkat Yekkirala c1a856c964 SELinux: Various xfrm labeling fixes
Since the upstreaming of the mlsxfrm modification a few months back,
testing has resulted in the identification of the following issues/bugs that
are resolved in this patch set.

1. Fix the security context used in the IKE negotiation to be the context
   of the socket as opposed to the context of the SPD rule.

2. Fix SO_PEERSEC for tcp sockets to return the security context of
   the peer as opposed to the source.

3. Fix the selection of an SA for an outgoing packet to be at the same
   context as the originating socket/flow.

The following would be the result of applying this patchset:

- SO_PEERSEC will now correctly return the peer's context.

- IKE deamons will receive the context of the source socket/flow
  as opposed to the SPD rule's context so that the negotiated SA
  will be at the same context as the source socket/flow.

- The SELinux policy will require one or more of the
  following for a socket to be able to communicate with/without SAs:

  1. To enable a socket to communicate without using labeled-IPSec SAs:

     allow socket_t unlabeled_t:association { sendto recvfrom }

  2. To enable a socket to communicate with labeled-IPSec SAs:

     allow socket_t self:association { sendto };
     allow socket_t peer_sa_t:association { recvfrom };

This Patch: Pass correct security context to IKE for use in negotiation

Fix the security context passed to IKE for use in negotiation to be the
context of the socket as opposed to the context of the SPD rule so that
the SA carries the label of the originating socket/flow.

Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02 21:21:31 -08:00
Linus Torvalds b07e3c3a1d Merge branch 'for-2.6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6
* 'for-2.6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  SELinux: validate kernel object classes and permissions
  SELinux: ensure keys constant in hashtab_search
  SELinux: export object class and permission definitions
  SELinux: remove current object class and permission validation mechanism
2006-12-01 16:43:42 -08:00
Chad Sellers b94c7e677b SELinux: validate kernel object classes and permissions
This is a new object class and permission validation scheme that validates
against the defined kernel headers. This scheme allows extra classes
and permissions that do not conflict with the kernel definitions to be
added to the policy. This validation is now done for all policy loads,
not just subsequent loads after the first policy load.

The implementation walks the three structrures containing the defined
object class and permission values and ensures their values are the
same in the policy being loaded. This includes verifying the object
classes themselves, the permissions they contain, and the permissions
they inherit from commons. Classes or permissions that are present in the
kernel but missing from the policy cause a warning (printed to KERN_INFO)
to be printed, but do not stop the policy from loading, emulating current
behavior. Any other inconsistencies cause the load to fail.

Signed-off-by: Chad Sellers <csellers@tresys.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2006-11-28 12:04:38 -05:00
Chad Sellers bb24249747 SELinux: ensure keys constant in hashtab_search
Makes the key argument passed into hashtab_search and all the functions
it calls constant. These functions include hash table function pointers
hash_value and keycmp. The only implementations of these currently
are symhash and symcmp, which do not modify the key. The key parameter
should never be changed by any of these, so it should be const. This
is necessary to allow calling these functions with keys found in kernel
object class and permission definitions.

Signed-off-by: Chad Sellers <csellers@tresys.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2006-11-28 12:04:37 -05:00
Chad Sellers 5c45899879 SELinux: export object class and permission definitions
Moves the definition of the 3 structs containing object class and
permission definitions from avc.c to avc_ss.h so that the security
server can access them for validation on policy load. This also adds
a new struct type, defined_classes_perms_t, suitable for allowing the
security server to access these data structures from the avc.

Signed-off-by: Chad Sellers <csellers@tresys.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2006-11-28 12:04:36 -05:00
Chad Sellers 5a64d4438e SELinux: remove current object class and permission validation mechanism
Removes the current SELinux object class and permission validation code,
as the current code makes it impossible to change or remove object classes
and permissions on a running system. Additionally, the current code does
not actually validate that the classes and permissions are correct, but
instead merely validates that they do not change between policy reloads.

Signed-off-by: Chad Sellers <csellers@tresys.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2006-11-28 12:04:35 -05:00
Akinobu Mita fc5d81e69d selinux: fix dentry_open() error check
The return value of dentry_open() shoud be checked by IS_ERR().

Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: James Morris <jmorris@namei.org>
2006-11-27 10:22:43 -05:00
David Howells 65f27f3844 WorkStruct: Pass the work_struct pointer instead of context data
Pass the work_struct pointer to the work function rather than context data.
The work function can use container_of() to work out the data.

For the cases where the container of the work_struct may go away the moment the
pending bit is cleared, it is made possible to defer the release of the
structure by deferring the clearing of the pending bit.

To make this work, an extra flag is introduced into the management side of the
work_struct.  This governs auto-release of the structure upon execution.

Ordinarily, the work queue executor would release the work_struct for further
scheduling or deallocation by clearing the pending bit prior to jumping to the
work function.  This means that, unless the driver makes some guarantee itself
that the work_struct won't go away, the work function may not access anything
else in the work_struct or its container lest they be deallocated..  This is a
problem if the auxiliary data is taken away (as done by the last patch).

However, if the pending bit is *not* cleared before jumping to the work
function, then the work function *may* access the work_struct and its container
with no problems.  But then the work function must itself release the
work_struct by calling work_release().

In most cases, automatic release is fine, so this is the default.  Special
initiators exist for the non-auto-release case (ending in _NAR).


Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 14:55:48 +00:00
Paul Moore f8687afefc [NetLabel]: protect the CIPSOv4 socket option from setsockopt()
This patch makes two changes to protect applications from either removing or
tampering with the CIPSOv4 IP option on a socket.  The first is the requirement
that applications have the CAP_NET_RAW capability to set an IPOPT_CIPSO option
on a socket; this prevents untrusted applications from setting their own
CIPSOv4 security attributes on the packets they send.  The second change is to
SELinux and it prevents applications from setting any IPv4 options when there
is an IPOPT_CIPSO option already present on the socket; this prevents
applications from removing CIPSOv4 security attributes from the packets they
send.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-30 15:24:49 -08:00
Paul Moore bf0edf3929 NetLabel: better error handling involving mls_export_cat()
Upon inspection it looked like the error handling for mls_export_cat() was
rather poor.  This patch addresses this by NULL'ing out kfree()'d pointers
before returning and checking the return value of the function everywhere
it is called.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
2006-10-15 23:14:15 -07:00
Chad Sellers 6e8c751e07 SELinux: Bug fix in polidydb_destroy
This patch fixes two bugs in policydb_destroy. Two list pointers
(policydb.ocontexts[i] and policydb.genfs) were not being reset to NULL when
the lists they pointed to were being freed. This caused a problem when the
initial policy load failed, as the policydb being destroyed was not a
temporary new policydb that was thrown away, but rather was the global
(active) policydb. Consequently, later functions, particularly
sys_bind->selinux_socket_bind->security_node_sid and
do_rw_proc->selinux_sysctl->selinux_proc_get_sid->security_genfs_sid tried
to dereference memory that had previously been freed.

Signed-off-by: Chad Sellers <csellers@tresys.com>
Signed-off-by: James Morris <jmorris@namei.org>
2006-10-11 23:59:41 -07:00
Venkat Yekkirala 5b368e61c2 IPsec: correct semantics for SELinux policy matching
Currently when an IPSec policy rule doesn't specify a security
context, it is assumed to be "unlabeled" by SELinux, and so
the IPSec policy rule fails to match to a flow that it would
otherwise match to, unless one has explicitly added an SELinux
policy rule allowing the flow to "polmatch" to the "unlabeled"
IPSec policy rules. In the absence of such an explicitly added
SELinux policy rule, the IPSec policy rule fails to match and
so the packet(s) flow in clear text without the otherwise applicable
xfrm(s) applied.

The above SELinux behavior violates the SELinux security notion of
"deny by default" which should actually translate to "encrypt by
default" in the above case.

This was first reported by Evgeniy Polyakov and the way James Morris
was seeing the problem was when connecting via IPsec to a
confined service on an SELinux box (vsftpd), which did not have the
appropriate SELinux policy permissions to send packets via IPsec.

With this patch applied, SELinux "polmatching" of flows Vs. IPSec
policy rules will only come into play when there's a explicit context
specified for the IPSec policy rule (which also means there's corresponding
SELinux policy allowing appropriate domains/flows to polmatch to this context).

Secondly, when a security module is loaded (in this case, SELinux), the
security_xfrm_policy_lookup() hook can return errors other than access denied,
such as -EINVAL.  We were not handling that correctly, and in fact
inverting the return logic and propagating a false "ok" back up to
xfrm_lookup(), which then allowed packets to pass as if they were not
associated with an xfrm policy.

The solution for this is to first ensure that errno values are
correctly propagated all the way back up through the various call chains
from security_xfrm_policy_lookup(), and handled correctly.

Then, flow_cache_lookup() is modified, so that if the policy resolver
fails (typically a permission denied via the security module), the flow
cache entry is killed rather than having a null policy assigned (which
indicates that the packet can pass freely).  This also forces any future
lookups for the same flow to consult the security module (e.g. SELinux)
for current security policy (rather than, say, caching the error on the
flow cache entry).

This patch: Fix the selinux side of things.

This makes sure SELinux polmatching of flow contexts to IPSec policy
rules comes into play only when an explicit context is associated
with the IPSec policy rule.

Also, this no longer defaults the context of a socket policy to
the context of the socket since the "no explicit context" case
is now handled properly.

Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: James Morris <jmorris@namei.org>
2006-10-11 23:59:37 -07:00
paul.moore@hp.com 388b24057f NetLabel: use SECINITSID_UNLABELED for a base SID
This patch changes NetLabel to use SECINITSID_UNLABLELED as it's source of
SELinux type information when generating a NetLabel context.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
2006-10-11 23:59:32 -07:00
paul.moore@hp.com ffb733c650 NetLabel: fix a cache race condition
Testing revealed a problem with the NetLabel cache where a cached entry could
be freed while in use by the LSM layer causing an oops and other problems.
This patch fixes that problem by introducing a reference counter to the cache
entry so that it is only freed when it is no longer in use.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
2006-10-11 23:59:29 -07:00
Matt LaPlante cab00891c5 Still more typo fixes
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 22:36:44 +02:00
Matt LaPlante 44c09201a4 more misc typo fixes
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 22:34:14 +02:00
Dave Hansen d8c76e6f45 [PATCH] r/o bind mount prepwork: inc_nlink() helper
This is mostly included for parity with dec_nlink(), where we will have some
more hooks.  This one should stay pretty darn straightforward for now.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:30 -07:00
David Woodhouse 2148ccc437 [PATCH] MLSXFRM: fix mis-labelling of child sockets
Accepted connections of types other than AF_INET, AF_INET6, AF_UNIX won't
have an appropriate label derived from the peer, so don't use it.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29 15:58:21 -07:00
Sukadev Bhattiprolu f400e198b2 [PATCH] pidspace: is_init()
This is an updated version of Eric Biederman's is_init() patch.
(http://lkml.org/lkml/2006/2/6/280).  It applies cleanly to 2.6.18-rc3 and
replaces a few more instances of ->pid == 1 with is_init().

Further, is_init() checks pid and thus removes dependency on Eric's other
patches for now.

Eric's original description:

	There are a lot of places in the kernel where we test for init
	because we give it special properties.  Most  significantly init
	must not die.  This results in code all over the kernel test
	->pid == 1.

	Introduce is_init to capture this case.

	With multiple pid spaces for all of the cases affected we are
	looking for only the first process on the system, not some other
	process that has pid == 1.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: <lxc-devel@lists.sourceforge.net>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29 09:18:12 -07:00
Chris Wright 3bc1fa8ae1 [PATCH] LSM: remove BSD secure level security module
This code has suffered from broken core design and lack of developer
attention.  Broken security modules are too dangerous to leave around.  It
is time to remove this one.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Acked-by: Michael Halcrow <mhalcrow@us.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Davi Arnaut <davi.arnaut@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29 09:18:10 -07:00
Cory Olmo 3528a95322 [PATCH] SELinux: support mls categories for context mounts
Allows commas to be embedded into context mount options (i.e.  "-o
context=some_selinux_context_t"), to better support multiple categories,
which are separated by commas and confuse mount.

For example, with the current code:

  mount -t iso9660 /dev/cdrom /media/cdrom -o \
  ro,context=system_u:object_r:iso9660_t:s0:c1,c3,c4,exec

The context option that will be interpreted by SELinux is
context=system_u:object_r:iso9660_t:s0:c1

instead of
context=system_u:object_r:iso9660_t:s0:c1,c3,c4

The options that will be passed on to the file system will be
ro,c3,c4,exec.

The proposed solution is to allow/require the SELinux context option
specified to mount to use quotes when the context contains a comma.

This patch modifies the option parsing in parse_opts(), contained in
mount.c, to take options after finding a comma only if it hasn't seen a
quote or if the quotes are matched.  It also introduces a new function that
will strip the quotes from the context option prior to translation.  The
quotes are replaced after the translation is completed to insure that in
the event the raw context contains commas the kernel will be able to
interpret the correct context.

Signed-off-by: Cory Olmo <colmo@TrustedCS.com>
Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29 09:18:03 -07:00
Theodore Ts'o ba52de123d [PATCH] inode-diet: Eliminate i_blksize from the inode structure
This eliminates the i_blksize field from struct inode.  Filesystems that want
to provide a per-inode st_blksize can do so by providing their own getattr
routine instead of using the generic_fillattr() function.

Note that some filesystems were providing pretty much random (and incorrect)
values for i_blksize.

[bunk@stusta.de: cleanup]
[akpm@osdl.org: generic_fillattr() fix]
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:26:18 -07:00
Theodore Ts'o 8e18e2941c [PATCH] inode_diet: Replace inode.u.generic_ip with inode.i_private
The following patches reduce the size of the VFS inode structure by 28 bytes
on a UP x86.  (It would be more on an x86_64 system).  This is a 10% reduction
in the inode size on a UP kernel that is configured in a production mode
(i.e., with no spinlock or other debugging functions enabled; if you want to
save memory taken up by in-core inodes, the first thing you should do is
disable the debugging options; they are responsible for a huge amount of bloat
in the VFS inode structure).

This patch:

The filesystem or device-specific pointer in the inode is inside a union,
which is pretty pointless given that all 30+ users of this field have been
using the void pointer.  Get rid of the union and rename it to i_private, with
a comment to explain who is allowed to use the void pointer.  This is just a
cleanup, but it allows us to reuse the union 'u' for something something where
the union will actually be used.

[judith@osdl.org: powerpc build fix]
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Judith Lebzelter <judith@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:26:17 -07:00
Stephen Smalley b20c8122a3 [PATCH] selinux: fix tty locking
Take tty_mutex when accessing ->signal->tty in selinux code.  Noted by Alan
Cox.  Longer term, we are looking at refactoring the code to provide better
encapsulation of the tty layer, but this is a simple fix that addresses the
immediate bug.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Alan Cox <alan@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:48:53 -07:00
Eric Paris bc7e982b84 [PATCH] SELinux: convert sbsec semaphore to a mutex
This patch converts the semaphore in the superblock security struct to a
mutex.  No locking changes or other code changes are done.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:48:53 -07:00
Eric Paris 2397074172 [PATCH] SELinux: change isec semaphore to a mutex
This patch converts the remaining isec->sem into a mutex.  Very similar
locking is provided as before only in the faster smaller mutex rather than a
semaphore.  An out_unlock path is introduced rather than the conditional
unlocking found in the original code.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:48:53 -07:00
Eric Paris 296fddf751 [PATCH] SELinux: eliminate inode_security_set_security
inode_security_set_sid is only called by security_inode_init_security, which
is called when a new file is being created and needs to have its incore
security state initialized and its security xattr set.  This helper used to be
called in other places in the past, but now only has the one.  So this patch
rolls inode_security_set_sid directly back into security_inode_init_security.
There also is no need to hold the isec->sem while doing this, as the inode is
not available to other threads at this point in time.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:48:53 -07:00
Darrel Goeddel f3f8771420 [PATCH] selinux: add support for range transitions on object classes
Introduces support for policy version 21.  This version of the binary
kernel policy allows for defining range transitions on security classes
other than the process security class.  As always, backwards compatibility
for older formats is retained.  The security class is read in as specified
when using the new format, while the "process" security class is assumed
when using an older policy format.

Signed-off-by: Darrel Goeddel <dgoeddel@trustedcs.com>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:48:52 -07:00