I got a couple more reports: the Samsung APST issues appears to
affect multiple 950-series devices in Dell XPS 15 9550 and Precision
5510 laptops. Change the quirk: rather than blacklisting the
firmware on the first problematic SSD that was reported, disable
APST on all 144d:a802 devices if they're installed in the two
affected Dell models. While we're at it, disable only the deepest
sleep state instead of all of them -- the reporters say that this is
sufficient to fix the problem.
(I have a device that appears to be entirely identical to one of the
affected devices, but I have a different Dell laptop, so it's not
the case that all Samsung devices with firmware BXW75D0Q are broken
under all circumstances.)
Samsung engineers have an affected system, and hopefully they'll
give us a better workaround some time soon. In the mean time, this
should minimize regressions.
See https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678184
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Policing filters do not use the TCA_ACT_* enum and the tb[]
nlattr array in tcf_action_init_1() doesn't get filled for
them so we should not try to look for a TCA_ACT_COOKIE
attribute in the then uninitialized array.
The error handling in cookie allocation then calls
tcf_hash_release() leading to invalid memory access later
on.
Additionally, if cookie allocation fails after an already
existing non-policing filter has successfully been changed,
tcf_action_release() should not be called, also we would
have to roll back the changes in the error handling, so
instead we now allocate the cookie early and assign it on
success at the end.
CVE-2017-7979
Fixes: 1045ba77a5 ("net sched actions: Add support for user cookies")
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sudarsana Reddy Kalluru says:
====================
qed: Dcbx bug fixes
The series has set of bug fixes for dcbx implementation of qed driver.
Please consider applying this to 'net' branch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Change ieee_setpfc() callback implementation to populate traffic class
count with the user provided value.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qed_dcbnl_get_dcbx() API uses kmalloc in GFT_KERNEL mode. The API gets
invoked in the interrupt context by qed_dcbnl_getdcbx callback. Need
to invoke this kmalloc in atomic mode.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PFC error-mask value is not supported by MFW, but this bit could be
set in the pfc bit-map of the operational parameters if remote device
supports it. These operational parameters are used as basis for
populating the dcbx config parameters. User provided configs will be
applied on top of these parameters and then send them to MFW when
requested. Driver need to clear the error-mask bit before sending the
config parameters to MFW.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some adapters may not publish the max_tc value. Populate the default
value for max_tc field in case the mfw didn't provide one.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver was failing to check that the SKB wasn't cloned
before adding checksum data.
Replace existing handling to extend/copy the header buffer
with skb_cow_head.
Signed-off-by: James Hughes <james.hughes@raspberrypi.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Woojung Huh <Woojung.Huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The labels were out of order, so it either could result in an Oops or a
leak.
Fixes: 48935bbb7a ("net/mlx5e: IPoIB, Add netdevice profile skeleton")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We've got the number of longs, yes, but we should multiply by
sizeof(long) to get the number of bytes needed.
Fixes: e4917d46a6 ("qede: Add aRFS support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mugunthan V N, who was reviewing TI's CPSW driver patches is
not working for TI anymore and wont be reviewing patches for
that driver.
Drop Mugunthan as the maintiainer for this driver.
Grygorii continues to be a reviewer. Dave Miller applies the
patches directly and adding a maintainer is actually
misleading since get_maintainer.pl script stops suggesting
that Dave Miller be copied.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2017-04-19
Two fixes for af_key:
1) Add a lock to key dump to prevent a NULL pointer dereference.
From Yuejie Shi.
2) Fix slab-out-of-bounds in parse_ipsecrequests.
From Herbert Xu.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
10GbE Intel Wired LAN Driver Updates 2017-04-18
This series contains updates to mainly ixgbe with only one ixgbevf change.
Usha adds a check to ensure the creation of number of VF's is valid based
on the traffic classes configured, all to avoid transmit hangs.
Joe Perches reduces the use of pr_cont since the output can be interleaved
by other processes.
Tony cleans up the code overwriting the KX4 config, which is configured by
the NVM. Adds a check for MMNGC.MNG_VETO, to resolve an issue where we
were getting a link loss for the BMC when loading the driver.
Don fixes up SGMII x553 config details which were missed in earlier
implementations. Added support for x552 XFI backplane interface support.
Cleaned up an unused define, which was causing confusion on supported
devices.
Emil fixes a link issue on KR parts by making sure the default setting is
set. Refactors the code so that the code for allocating memory for the
list of MAC addresses that the VFs can use into its own function. Made
some code cleans to help readability and ensure notification of SRIOV
being enabled is done upon completion. Fixed an issue where if we failed
to allocate vfinfo in __ixgbe_enable_sriov() the driver would crash with
a NULL pointer dereference.
Philippe Reynes updates ixgbevf to use the new API for
{get|set}_link_ksettings.
Alex increases the headroom allocation when using build_skb() on a
system with 4K pages. Fixed an issue in ixgbe_dump() where we were no
longer clearing the status bit.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is prompted by a static checker warning about a potential
use after free. The concern is that netif_rx_ni() can free "skb" and we
call it twice.
When I look at the commit that added this, it looks like some stray
lines were added accidentally. It doesn't make sense to me that we
would recieve the same data two times. I asked the author but never
recieved a response.
I can't test this code, but I'm pretty sure my patch is correct.
Fixes: 4b063258ab ("dp83640: Delay scheduled work.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern reported that 5425077d73 ("net: ipv6: Add early demux
handler for UDP unicast") breaks udp_l3mdev_accept=0 since early
demux for IPv6 UDP was doing a generic socket lookup which does not
require an exact match. Fix this by making UDPv6 early demux match
connected sockets only.
v1->v2: Take reference to socket after match as suggested by Eric
v2->v3: Add comment before break
Fixes: 5425077d73 ("net: ipv6: Add early demux handler for UDP unicast")
Reported-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Eric Dumazet <edumazet@google.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Tested-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet says:
====================
tcp: address two poll() flakes
Some packetdrill tests are failing when host kernel is using ASAN
or other debugging infrastructure.
I was able to fix the flakes by making sure we were not
sending wakeup events too soon.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When using TCP FastOpen for an active session, we send one wakeup event
from tcp_finish_connect(), right before the data eventually contained in
the received SYNACK is queued to sk->sk_receive_queue.
This means that depending on machine load or luck, poll() users
might receive POLLOUT events instead of POLLIN|POLLOUT
To fix this, we need to move the call to sk->sk_state_change()
after the (optional) call to tcp_rcv_fastopen_synack()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a RST packet is processed, we send two wakeup events to interested
polling users.
First one by a sk->sk_error_report(sk) from tcp_reset(),
followed by a sk->sk_state_change(sk) from tcp_done().
Depending on machine load and luck, poll() can either return POLLERR,
or POLLIN|POLLOUT|POLLERR|POLLHUP (this happens on 99 % of the cases)
This is probably fine, but we can avoid the confusion by reordering
things so that we have more TCP fields updated before the first wakeup.
This might even allow us to remove some barriers we added in the past.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes an out-of-bounds access in seg6_validate_srh() when the
trailing data is less than sizeof(struct sr6_tlv).
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
'psock_fanout' has been failing since commit 4d7b9dc1f3 ("tools:
psock_lib: harden socket filter used by psock tests"). That commit
changed the CBPF filter to examine the full ethernet frame, and was
tested on 'psock_tpacket' which uses SOCK_RAW. But 'psock_fanout' was
also using this same CBPF in two places, for filtering and fanout, on a
SOCK_DGRAM socket.
Change 'psock_fanout' to use SOCK_RAW so that the CBPF program used with
SO_ATTACH_FILTER can examine the entire frame. Create a new CBPF
program for use with PACKET_FANOUT_DATA which ignores the header, as it
cannot see the ethernet header.
Tested: Ran tools/testing/selftests/net/psock_{fanout,tpacket} 10 times,
and they all passed.
Fixes: 4d7b9dc1f3 ("tools: psock_lib: harden socket filter used by psock tests")
Signed-off-by: 'Mike Maloney <maloneykernel@gmail.com>'
Signed-off-by: David S. Miller <davem@davemloft.net>
AP/AP_VLAN modes don't accept any real 802.11 multicast data
frames, but since they do need to accept broadcast management
frames the same is currently permitted for data frames. This
opens a security problem because such frames would be decrypted
with the GTK, and could even contain unicast L3 frames.
Since the spec says that ToDS frames must always have the BSSID
as the RA (addr1), reject any other data frames.
The problem was originally reported in "Predicting, Decrypting,
and Abusing WPA2/802.11 Group Keys" at usenix
https://www.usenix.org/conference/usenixsecurity16/technical-sessions/presentation/vanhoef
and brought to my attention by Jouni.
Cc: stable@vger.kernel.org
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
--
Dave, I didn't want to send you a new pull request for a single
commit yet again - can you apply this one patch as is?
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko says:
====================
mlxsw: Allow flow based forwarding in OVS
This patchset does some fixes so the HW is setup correctly to do
flow-based (ACL based) forwarding for OVS-enslaved port.
The first patch is just trivial fix spotted on the way.
Patches 2-4 take care of proper FID setup which HW needs in order to
for ACL based forwarding.
The 7th patch (with dependency of patch 5 and 6) takes care of proper setup
of ports that are enslaved in OVS.
The last patch implements new FID miss trap that is used to push
packets belonging to unknown flows to kernel and userspace.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When there is no FID set for a specific packet, the HW will drop it.
However, by default these packets are useful to be delivered to CPU as
it can inspect them and program HW accordingly. So add this trap.
This would only ever happen when port is enslaved to an OVS master.
Otherwise, packets would be dropped during VLAN / STP filtering,
before FID classification.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
>From now on, a port can become a slave of OVS master. All vlans
are enabled, STP state is set to "forwarding". It is up to the OVS
userspace daemon to setup the flows either in kernel or in HW using TC
flower offload.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To find out if a netdev is an OVS port.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
So far, mlxsw_sp_port_vlan_set range is limited by
MLXSW_REG_SPVM_REC_MAX_COUNT. In spectrum_switchdev code this is
wrapped up by a helper function which actually does multiple calls
to FW for bigger ranges. Move the code into mlxsw_sp_port_vlan_set
and use it always. That allows caller not to care about the range.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
HW requires the FID to be valid in order for the forward action to work.
So regardless of the current FID validity, just set the dummy FID which
would do the trick.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For forwarding using ACL action, HW needs a valid FID to be setup. It
does not actually use it, so it can be any valid FID. So create a dummy
FID only for this purpose.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement part of multipurpose Virtual Router and Forwarding Domain
Action that takes care of setting up FID. We need to use it to be able
to forward packets using ACL action when no FID is associated on RX.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One is a race condition when enabling the snapshot function probe
trigger. It enables the probe before allocating the snapshot, and
if the probe triggers first, it stops tracing with a warning that
the snapshot buffer was not allocated.
The seconds is that the snapshot file should show how to use it when
it is empty. But a bug fix from long ago broke the "is empty" test
and the snapshot file no longer displays the help message.
-----BEGIN PGP SIGNATURE-----
iQExBAABCAAbBQJY+L3dFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
DyQH/j4ZoRhc+XziMw7iJxNvDfptT9XFawqTKDdYJ3nMsFp+40bzlfYah94b1YYQ
YTLnvlxtiYUo1rifOnsdY913IKLc1wtO/a/S8/qqUJ1+7ik46zgaPYqNQlvM6clV
xoJQ6+c631SbJ3KuhadvXTABvzF4Qc1w0/f81lzGgYE8IB2VxiWeYZDMVxe5r2oM
A0seve9C5Wps39m/kcFHSVMZwpk6s7gZL7ERcME4dOewJpQ7b0ufWXMsBssD0bMx
G0ihBdfeM6TzXSTtrnLzU9eZaUtfh37olpvjpJzdIUUqwVpSrxOKmLcsYCIeNs3f
YuS54g7kEsDqLxGJvkC0UBou2rU=
=DQC3
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.11-rc5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull two more ftrace fixes from Steven Rostedt:
"While continuing my development, I uncovered two more small bugs.
One is a race condition when enabling the snapshot function probe
trigger. It enables the probe before allocating the snapshot, and if
the probe triggers first, it stops tracing with a warning that the
snapshot buffer was not allocated.
The seconds is that the snapshot file should show how to use it when
it is empty. But a bug fix from long ago broke the "is empty" test and
the snapshot file no longer displays the help message"
* tag 'trace-v4.11-rc5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Have ring_buffer_iter_empty() return true when empty
tracing: Allocate the snapshot buffer before enabling probe
The hardware has a LPI interrupt.
There is already code in the stmmac driver to parse and handle the
interrupt. However, this information was missing from the DT binding.
At the same time, improve the description of the existing interrupts.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Acked-By: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
struct sock_filter_ext didn't make it into the tree and is now called
struct bpf_insn. Reword the kerneldoc comment for bpf_convert_filter()
accordingly.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull HID fixes from Jiri Kosina:
"Two last-minute regression fixes for Wacom driver from Jason Gerecke"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: wacom: Override incorrect logical maximum contact identifier
HID: wacom: Treat HID_DG_TOOLSERIALNUMBER as unsigned
Pull s390 fix from Martin Schwidefsky:
"There is one more fix I would like to see in 4.11: The combination of
KVM, CMMA and heavy paging can cause data corruption, the fix is to
clear the _PAGE_UNUSED bit in set_pte_at()"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: fix CMMA vs KSM vs others
-----BEGIN PGP SIGNATURE-----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=GMHf
-----END PGP SIGNATURE-----
Merge tag 'keys-fixes-20170419' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keyrings fixes from David Howells:
(1) Disallow keyrings whose name begins with a '.' to be joined
[CVE-2016-9604].
(2) Change the name of the dead type to ".dead" to prevent user access
[CVE-2017-6951].
(3) Fix keyctl_set_reqkey_keyring() to not leak thread keyrings
[CVE-2017-7472]
* tag 'keys-fixes-20170419' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
KEYS: fix keyctl_set_reqkey_keyring() to not leak thread keyrings
KEYS: Change the name of the dead type to ".dead" to prevent user access
KEYS: Disallow keyrings beginning with '.' to be joined as session keyrings
* connection quality monitoring with multiple thresholds
* support for FILS shared key authentication offload
* pre-CAC regulatory compliance - only ETSI allows this
* sanity check for some rate confusion that hit ChromeOS
(but nobody else uses it, evidently)
* some documentation updates
* lots of cleanups
-----BEGIN PGP SIGNATURE-----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=f4VT
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-davem-2017-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
My last pull request has been a while, we now have:
* connection quality monitoring with multiple thresholds
* support for FILS shared key authentication offload
* pre-CAC regulatory compliance - only ETSI allows this
* sanity check for some rate confusion that hit ChromeOS
(but nobody else uses it, evidently)
* some documentation updates
* lots of cleanups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Juergen Borleis says:
====================
net: dsa: add SMSC/Microchip LAN9303 three port ethernet switch driver
The LAN9303 is a three port 10/100 ethernet switch with integrated phys
for the two external ethernet ports. The third port is an RMII/MII
interface to a host master network interface (e.g. fixed link).
While the LAN9303 device itself supports offload packet processing, this
driver does not make use of it yet. This driver just configures the device
to provide two separate network interfaces (which is the default state of
a DSA device).
Please note: the "MDIO managed mode" driver part isn't tested yet. I have
used and tested the "I2C managed mode" only.
Changes in v6:
- fix support to use the driver as a module (core, i2c and mdio)
- license info added in all parts of the driver (for module support)
Changes in v5:
- add missing include file to 'net/dsa/tag_lan9303.c'
Changes in v4:
- rebased on net-next, 'net/dsa/tag_lan9303.c' adapted to changed API
Changes in v3:
- 'ds_to_lan9303()' removed
- special PHY reg MII_LAN911X_SPECIAL_CONTROL_STATUS mapping removed
- compatible strings for I2C and MDIO are now different
- MDIO-managed-mode devicetree binding added (still compile time tested only)
Changes in v2:
- code moved to 'drivers/net/dsa'
- timeouts in completion wait loops
- macros instead of various magic numbers
- development code removed
- devicetree property names changed
- devicetree example adapted
- tried to avoid to mix 'switching' and 'forwarding'...
Comments are welcome.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When the LAN9303 device is in MDIO manged mode, all register accesses must
be done via MDIO.
Please note: this code is compile time tested only due to the absence of such
configured hardware. It is based on a patch from Stefan Roese from 2014.
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
CC: devicetree@vger.kernel.org
CC: robh+dt@kernel.org
CC: mark.rutland@arm.com
CC: sr@denx.de
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In this mode the switch device and the internal phys will be managed via
I2C interface. The MDIO interface is still supported, but for the
(emulated) CPU port only.
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
CC: devicetree@vger.kernel.org
CC: robh+dt@kernel.org
CC: mark.rutland@arm.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SMSC/Microchip LAN9303 is an ethernet switch device with one CPU port
and two external ethernet ports with built-in phys.
This driver uses the DSA framework, but is currently only capable of
separating the two external ports. There is no offload support yet.
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
To define the outgoing port and to discover the incoming port a regular
VLAN tag is used by the LAN9303. But its VID meaning is 'special'.
This tag handler/filter depends on some hardware features which must be
enabled in the device to provide and make use of this special VLAN tag
to control the destination and the source of an ethernet packet.
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bad SKB accesses if the SKB was paged, which is the case
for the only driver supporting this - iwlwifi.
-----BEGIN PGP SIGNATURE-----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=r4GR
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2017-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A single fix, for the MU-MIMO monitor mode, that fixes
bad SKB accesses if the SKB was paged, which is the case
for the only driver supporting this - iwlwifi.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
gcc 4.8.4 complains that mlx4_SW2HW_MPT_wrapper() uses an uninitialized
'mpt' variable:
drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'mlx4_SW2HW_MPT_wrapper':
drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:2802:12: warning: 'mpt' may be used uninitialized in this function [-Wmaybe-uninitialized]
mpt->mtt = mtt;
I think this warning is a false complaint. mpt is only used when
mr_res_start_move_to() return zero, and in all such cases it initializes
mpt. But apparently gcc cannot see that.
Initialize mpt to avoid the warning.
Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A function in kernel/bpf/syscall.c which got a bug fix in 'net'
was moved to kernel/bpf/verifier.c in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently for DDR50 card, it need tuning in default. We meet tuning fail
issue for DDR50 card and some data CRC error when DDR50 sd card works.
This is because the default pad I/O drive strength can't make sure DDR50
card work stable. So increase the pad I/O drive strength for DDR50 card,
and use pins_100mhz.
This fixes DDR50 card support for IMX since DDR50 tuning was enabled from
commit 9faac7b95e ("mmc: sdhci: enable tuning for DDR50")
Tested-and-reported-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Cc: stable@vger.kernel.org # v4.4+
Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
update RF register 47 and 54 values according to vendor driver
Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Andy Lutomirski
Wolfgang Bumiller
David S. Miller
sudarsana.kalluru@cavium.com
James Hughes
Dan Carpenter
Sekhar Nori
Chema Gonzalez
Jamal Hadi Salim
subashab@codeaurora.org
Eric Dumazet
David Lebrun
Mike Maloney
Johannes Berg
Jiri Pirko
Linus Torvalds
Niklas Cassel
Tobias Klauser
Juergen Beisert
Greg Thelen
Haibo Chen
Tomislav Požega