Commit Graph

126 Commits

Author SHA1 Message Date
Guoqing Jiang 067df25c83 raid5: use bio_end_sector in r5_next_bio
Actually, we calculate bio's end sector here, so use the common
way for the purpose.

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-13 13:14:43 -07:00
Guoqing Jiang feb9bf9849 raid5: remove STRIPE_OPS_REQ_PENDING
This stripe state is not used anymore after commit 51acbcec6c
("md: remove CONFIG_MULTICORE_RAID456"), so remove the obsoleted
state.

gjiang@nb01257:~/md$ grep STRIPE_OPS_REQ_PENDING drivers/md/ -r
drivers/md/raid5.c:					  (1 << STRIPE_OPS_REQ_PENDING) |
drivers/md/raid5.h:	STRIPE_OPS_REQ_PENDING,

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-13 13:14:39 -07:00
Kent Overstreet b330e6a49d md: convert to kvmalloc
The code really just wants a big flat buffer, so just do that.

Link: http://lkml.kernel.org/r/20181217131929.11727-3-kent.overstreet@gmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Cc: Shaohua Li <shli@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Pravin B Shelar <pshelar@ovn.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 10:04:02 -07:00
Linus Torvalds d60dafdca4 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md
Pull MD updates from Shaohua Li:
 "A few fixes of MD for this merge window. Mostly bug fixes:

   - raid5 stripe batch fix from Amy

   - Read error handling for raid1 FailFast device from Gioh

   - raid10 recovery NULL pointer dereference fix from Guoqing

   - Support write hint for raid5 stripe cache from Mariusz

   - Fixes for device hot add/remove from Neil and Yufen

   - Improve flush bio scalability from Xiao"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  MD: fix lock contention for flush bios
  md/raid5: Assigning NULL to sh->batch_head before testing bit R5_Overlap of a stripe
  md/raid1: add error handling of read error from FailFast device
  md: fix NULL dereference of mddev->pers in remove_and_add_spares()
  raid5: copy write hint from origin bio to stripe
  md: fix two problems with setting the "re-add" device state.
  raid10: check bio in r10buf_pool_free to void NULL pointer dereference
  md: fix an error code format and remove unsed bio_sector
2018-06-09 12:01:36 -07:00
Kent Overstreet afeee514ce md: convert to bioset_init()/mempool_init()
Convert md to embedded bio sets.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-30 15:33:32 -06:00
Mariusz Dabrowski 2cd259a77d raid5: copy write hint from origin bio to stripe
Store write hint from original bio in stripe head so it can be assigned
to bio sent to each RAID device.

Signed-off-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2018-05-17 09:55:58 -07:00
NeilBrown f2785b527c md: document lifetime of internal rdev pointer.
The rdev pointer kept in the local 'config' for each for
raid1, raid10, raid4/5/6 has non-obvious lifetime rules.
Sometimes RCU is needed, sometimes a lock, something nothing.

Add documentation to explain this.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
2018-02-18 10:22:27 -08:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Linus Torvalds d35a878ae1 - A major update for DM cache that reduces the latency for deciding
whether blocks should migrate to/from the cache.  The bio-prison-v2
   interface supports this improvement by enabling direct dispatch of
   work to workqueues rather than having to delay the actual work
   dispatch to the DM cache core.  So the dm-cache policies are much more
   nimble by being able to drive IO as they see fit.  One immediate
   benefit from the improved latency is a cache that should be much more
   adaptive to changing workloads.
 
 - Add a new DM integrity target that emulates a block device that has
   additional per-sector tags that can be used for storing integrity
   information.
 
 - Add a new authenticated encryption feature to the DM crypt target that
   builds on the capabilities provided by the DM integrity target.
 
 - Add MD interface for switching the raid4/5/6 journal mode and update
   the DM raid target to use it to enable aid4/5/6 journal write-back
   support.
 
 - Switch the DM verity target over to using the asynchronous hash crypto
   API (this helps work better with architectures that have access to
   off-CPU algorithm providers, which should reduce CPU utilization).
 
 - Various request-based DM and DM multipath fixes and improvements from
   Bart and Christoph.
 
 - A DM thinp target fix for a bio structure leak that occurs for each
   discard IFF discard passdown is enabled.
 
 - A fix for a possible deadlock in DM bufio and a fix to re-check the
   new buffer allocation watermark in the face of competing admin changes
   to the 'max_cache_size_bytes' tunable.
 
 - A couple DM core cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJZB6vtAAoJEMUj8QotnQNaoicIALuZTLElgAzxzA28cfk1+1Ea
 Gd09CfJ3M6cvk/YGUU7WwiSYIwu16yOJALG4sLcYnEmUCzvKfFPcl/RpeSJHPpYM
 0aVXa6NIJw7K2r3C17toiK2DRMHYw6QU843WeWI93vBW13lDJklNJL9fM7GBEOLH
 NMSNw2mAq9ajtLlnJhM3ZfhloA7/u/jektvlBO1AA3RQ5Kx1cXVXFPqN7FdRfcqp
 4RuEMe9faAadlXLsj3bia5IBmF/W0Qza6JilP+NLKLWB4fm7LZDjN/k+TsHWMa9e
 cGR73TgUGLMBJX+sDJy8R3oeBG9JZkFVkD7I30eCjzyhSOs/54XNYQ23EkqHJU0=
 =9Ryi
 -----END PGP SIGNATURE-----

Merge tag 'for-4.12/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - A major update for DM cache that reduces the latency for deciding
   whether blocks should migrate to/from the cache. The bio-prison-v2
   interface supports this improvement by enabling direct dispatch of
   work to workqueues rather than having to delay the actual work
   dispatch to the DM cache core. So the dm-cache policies are much more
   nimble by being able to drive IO as they see fit. One immediate
   benefit from the improved latency is a cache that should be much more
   adaptive to changing workloads.

 - Add a new DM integrity target that emulates a block device that has
   additional per-sector tags that can be used for storing integrity
   information.

 - Add a new authenticated encryption feature to the DM crypt target
   that builds on the capabilities provided by the DM integrity target.

 - Add MD interface for switching the raid4/5/6 journal mode and update
   the DM raid target to use it to enable aid4/5/6 journal write-back
   support.

 - Switch the DM verity target over to using the asynchronous hash
   crypto API (this helps work better with architectures that have
   access to off-CPU algorithm providers, which should reduce CPU
   utilization).

 - Various request-based DM and DM multipath fixes and improvements from
   Bart and Christoph.

 - A DM thinp target fix for a bio structure leak that occurs for each
   discard IFF discard passdown is enabled.

 - A fix for a possible deadlock in DM bufio and a fix to re-check the
   new buffer allocation watermark in the face of competing admin
   changes to the 'max_cache_size_bytes' tunable.

 - A couple DM core cleanups.

* tag 'for-4.12/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (50 commits)
  dm bufio: check new buffer allocation watermark every 30 seconds
  dm bufio: avoid a possible ABBA deadlock
  dm mpath: make it easier to detect unintended I/O request flushes
  dm mpath: cleanup QUEUE_IF_NO_PATH bit manipulation by introducing assign_bit()
  dm mpath: micro-optimize the hot path relative to MPATHF_QUEUE_IF_NO_PATH
  dm: introduce enum dm_queue_mode to cleanup related code
  dm mpath: verify __pg_init_all_paths locking assumptions at runtime
  dm: verify suspend_locking assumptions at runtime
  dm block manager: remove an unused argument from dm_block_manager_create()
  dm rq: check blk_mq_register_dev() return value in dm_mq_init_request_queue()
  dm mpath: delay requeuing while path initialization is in progress
  dm mpath: avoid that path removal can trigger an infinite loop
  dm mpath: split and rename activate_path() to prepare for its expanded use
  dm ioctl: prevent stack leak in dm ioctl call
  dm integrity: use previously calculated log2 of sectors_per_block
  dm integrity: use hex2bin instead of open-coded variant
  dm crypt: replace custom implementation of hex2bin()
  dm crypt: remove obsolete references to per-CPU state
  dm verity: switch to using asynchronous hash crypto API
  dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues
  ...
2017-05-03 10:31:20 -07:00
NeilBrown dd7a8f5dee md/raid5: make chunk_aligned_read() split bios more cleanly.
chunk_aligned_read() currently uses fs_bio_set - which is meant for
filesystems to use - and loops if multiple splits are needed, which is
not best practice.
As this is only used for READ requests, not writes, it is unlikely
to cause a problem.  However it is best to be consistent in how
we split bios, and to follow the pattern used in raid1/raid10.

So create a private bioset, bio_split, and use it to perform a single
split, submitting the remainder to generic_make_request() for later
processing.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-11 10:16:50 -07:00
Heinz Mauelshagen 78e470c26f md: add raid4/5/6 journal mode switching API
Commit 2ded370373 ("md/r5cache: State machine for raid5-cache write
back mode") added support for "write-back" caching on the raid journal
device.

In order to allow the dm-raid target to switch between the available
"write-through" and "write-back" modes, provide a new
r5c_journal_mode_set() API.

Use the new API in existing r5c_journal_mode_store()

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Acked-by: Shaohua Li <shli@fb.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-27 11:13:47 -04:00
NeilBrown 0472a42ba1 md/raid5: remove over-loading of ->bi_phys_segments.
When a read request, which bypassed the cache, fails, we need to retry
it through the cache.
This involves attaching it to a sequence of stripe_heads, and it may not
be possible to get all the stripe_heads we need at once.
We do what we can, and record how far we got in ->bi_phys_segments so
we can pick up again later.

There is only ever one bio which may have a non-zero offset stored in
->bi_phys_segments, the one that is either active in the single thread
which calls retry_aligned_read(), or is in conf->retry_read_aligned
waiting for retry_aligned_read() to be called again.

So we only need to store one offset value.  This can be in a local
variable passed between remove_bio_from_retry() and
retry_aligned_read(), or in the r5conf structure next to the
->retry_read_aligned pointer.

Storing it there allows the last usage of ->bi_phys_segments to be
removed from md/raid5.c.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-22 19:16:56 -07:00
NeilBrown 016c76ac76 md/raid5: use bio_inc_remaining() instead of repurposing bi_phys_segments as a counter
md/raid5 needs to keep track of how many stripe_heads are processing a
bio so that it can delay calling bio_endio() until all stripe_heads
have completed.  It currently uses 16 bits of ->bi_phys_segments for
this purpose.

16 bits is only enough for 256M requests, and it is possible for a
single bio to be larger than this, which causes problems.  Also, the
bio struct contains a larger counter, __bi_remaining, which has a
purpose very similar to the purpose of our counter.  So stop using
->bi_phys_segments, and instead use __bi_remaining.

This means we don't need to initialize the counter, as our caller
initializes it to '1'.  It also means we can call bio_endio() directly
as it tests this counter internally.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-22 19:16:30 -07:00
NeilBrown bd83d0a28c md/raid5: call bio_endio() directly rather than queueing for later.
We currently gather bios that need to be returned into a bio_list
and call bio_endio() on them all together.
The original reason for this was to avoid making the calls while
holding a spinlock.
Locking has changed a lot since then, and that reason is no longer
valid.

So discard return_io() and various return_bi lists, and just call
bio_endio() directly as needed.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-22 19:16:12 -07:00
NeilBrown 16d997b78b md/raid5: simplfy delaying of writes while metadata is updated.
If a device fails during a write, we must ensure the failure is
recorded in the metadata before the completion of the write is
acknowleged.

Commit c3cce6cda1 ("md/raid5: ensure device failure recorded before
write request returns.")  added code for this, but it was
unnecessarily complicated.  We already had similar functionality for
handling updates to the bad-block-list, thanks to Commit de393cdea6
("md: make it easier to wait for bad blocks to be acknowledged.")

So revert most of the former commit, and instead avoid collecting
completed writes if MD_CHANGE_PENDING is set.  raid5d() will then flush
the metadata and retry the stripe_head.
As this change can leave a stripe_head ready for handling immediately
after handle_active_stripes() returns, we change raid5_do_work() to
pause when MD_CHANGE_PENDING is set, so that it doesn't spin.

We check MD_CHANGE_PENDING *after* analyse_stripe() as it could be set
asynchronously.  After analyse_stripe(), we have collected stable data
about the state of devices, which will be used to make decisions.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-22 19:15:57 -07:00
Artur Paszkiewicz 3418d036c8 raid5-ppl: Partial Parity Log write logging implementation
Implement the calculation of partial parity for a stripe and PPL write
logging functionality. The description of PPL is added to the
documentation. More details can be found in the comments in raid5-ppl.c.

Attach a page for holding the partial parity data to stripe_head.
Allocate it only if mddev has the MD_HAS_PPL flag set.

Partial parity is the xor of not modified data chunks of a stripe and is
calculated as follows:

- reconstruct-write case:
  xor data from all not updated disks in a stripe

- read-modify-write case:
  xor old data and parity from all updated disks in a stripe

Implement it using the async_tx API and integrate into raid_run_ops().
It must be called when we still have access to old data, so do it when
STRIPE_OP_BIODRAIN is set, but before ops_run_prexor5(). The result is
stored into sh->ppl_page.

Partial parity is not meaningful for full stripe write and is not stored
in the log or used for recovery, so don't attempt to calculate it when
stripe has STRIPE_FULL_WRITE.

Put the PPL metadata structures to md_p.h because userspace tools
(mdadm) will also need to read/write PPL.

Warn about using PPL with enabled disk volatile write-back cache for
now. It can be removed once disk cache flushing before writing PPL is
implemented.

Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-16 16:55:54 -07:00
Artur Paszkiewicz ff875738ed raid5: separate header for log functions
Move raid5-cache declarations from raid5.h to raid5-log.h, add inline
wrappers for functions which will be shared with ppl and use them in
raid5 core instead of direct calls to raid5-cache.

Remove unused parameter from r5c_cache_data(), move two duplicated
pr_debug() calls to r5l_init_log().

Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-16 16:55:54 -07:00
Shaohua Li aaf9f12ebf md/raid5: sort bios
Previous patch (raid5: only dispatch IO from raid5d for harddisk raid)
defers IO dispatching. The goal is to create better IO pattern. At that
time, we don't sort the deffered IO and hope the block layer can do IO
merge and sort. Now the raid5-cache writeback could create large amount
of bios. And if we enable muti-thread for stripe handling, we can't
control when to dispatch IO to raid disks. In a lot of time, we are
dispatching IO which block layer can't do merge effectively.

This patch moves further for the IO dispatching defer. We accumulate
bios, but we don't dispatch all the bios after a threshold is met. This
'dispatch partial portion of bios' stragety allows bios coming in a
large time window are sent to disks together. At the dispatching time,
there is large chance the block layer can merge the bios. To make this
more effective, we dispatch IO in ascending order. This increases
request merge chance and reduces disk seek.

Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-16 16:55:52 -07:00
Shaohua Li 535ae4eb12 md/raid5: prioritize stripes for writeback
In raid5-cache writeback mode, we have two types of stripes to handle.
- stripes which aren't cached yet
- stripes which are cached and flushing out to raid disks

Upperlayer is more sensistive to latency of the first type of stripes
generally. But we only one handle list for all these stripes, where the
two types of stripes are mixed together. When reclaim flushes a lot of
stripes, the first type of stripes could be noticeably delayed. On the
other hand, if the log space is tight, we'd like to handle the second
type of stripes faster and free log space.

This patch destinguishes the two types stripes. They are added into
different handle list. When we try to get a stripe to handl, we prefer
the first type of stripes unless log space is tight.

This should have no impact for !writeback case.

Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-16 16:55:51 -07:00
Shaohua Li e33fbb9cc7 md/raid5-cache: exclude reclaiming stripes in reclaim check
stripes which are being reclaimed are still accounted into cached
stripes. The reclaim takes time. r5c_do_reclaim isn't aware of the
stripes and does unnecessary stripe reclaim. In practice, I saw one
stripe is reclaimed one time. This will cause bad IO pattern. Fixing
this by excluding the reclaing stripes in the check.

Cc: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-02-13 09:20:05 -08:00
Song Liu 03b047f45c md/r5cache: enable chunk_aligned_read with write back cache
Chunk aligned read significantly reduces CPU usage of raid456.
However, it is not safe to fully bypass the write back cache.
This patch enables chunk aligned read with write back cache.

For chunk aligned read, we track stripes in write back cache at
a bigger granularity, "big_stripe". Each chunk may contain more
than one stripe (for example, a 256kB chunk contains 64 4kB-page,
so this chunk contain 64 stripes). For chunk_aligned_read, these
stripes are grouped into one big_stripe, so we only need one lookup
for the whole chunk.

For each big_stripe, struct big_stripe_info tracks how many stripes
of this big_stripe are in the write back cache. We count how many
stripes of this big_stripe are in the write back cache. These
counters are tracked in a radix tree (big_stripe_tree).
r5c_tree_index() is used to calculate keys for the radix tree.

chunk_aligned_read() calls r5c_big_stripe_cached() to look up
big_stripe of each chunk in the tree. If this big_stripe is in the
tree, chunk_aligned_read() aborts. This look up is protected by
rcu_read_lock().

It is necessary to remember whether a stripe is counted in
big_stripe_tree. Instead of adding new flag, we reuses existing flags:
STRIPE_R5C_PARTIAL_STRIPE and STRIPE_R5C_FULL_STRIPE. If either of these
two flags are set, the stripe is counted in big_stripe_tree. This
requires moving set_bit(STRIPE_R5C_PARTIAL_STRIPE) to
r5c_try_caching_write(); and moving clear_bit of
STRIPE_R5C_PARTIAL_STRIPE and STRIPE_R5C_FULL_STRIPE to
r5c_finish_stripe_write_out().

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-02-13 09:17:51 -08:00
Shaohua Li 765d704db1 raid5: only dispatch IO from raid5d for harddisk raid
We made raid5 stripe handling multi-thread before. It works well for
SSD. But for harddisk, the multi-threading creates more disk seek, so
not always improve performance. For several hard disks based raid5,
multi-threading is required as raid5d becames a bottleneck especially
for sequential write.

To overcome the disk seek issue, we only dispatch IO from raid5d if the
array is harddisk based. Other threads can still handle stripes, but
can't dispatch IO.

Idealy, we should control IO dispatching order according to IO position
interrnally. Right now we still depend on block layer, which isn't very
efficient sometimes though.

My setup has 9 harddisks, each disk can do around 180M/s sequential
write. So in theory, the raid5 can do 180 * 8 = 1440M/s sequential
write. The test machine uses an ATOM CPU. I measure sequential write
with large iodepth bandwidth to raid array:

without patch: ~600M/s
without patch and group_thread_cnt=4: 750M/s
with patch and group_thread_cnt=4: 950M/s
with patch, group_thread_cnt=4, skip_copy=1: 1150M/s

We are pretty close to the maximum bandwidth in the large iodepth
iodepth case. The performance gap of small iodepth sequential write
between software raid and theory value is still very big though, because
we don't have an efficient pipeline.

Cc: NeilBrown <neilb@suse.com>
Cc: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-02-13 09:17:50 -08:00
Song Liu 2e38a37f23 md/r5cache: disable write back for degraded array
write-back cache in degraded mode introduces corner cases to the array.
Although we try to cover all these corner cases, it is safer to just
disable write-back cache when the array is in degraded mode.

In this patch, we disable writeback cache for degraded mode:
1. On device failure, if the array enters degraded mode, raid5_error()
   will submit async job r5c_disable_writeback_async to disable
   writeback;
2. In r5c_journal_mode_store(), it is invalid to enable writeback in
   degraded mode;
3. In r5c_try_caching_write(), stripes with s->failed>0 will be handled
   in write-through mode.

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-01-24 11:26:06 -08:00
Song Liu 86aa1397dd md/r5cache: read data into orig_page for prexor of cached data
With write back cache, we use orig_page to do prexor. This patch
makes sure we read data into orig_page for it.

Flag R5_OrigPageUPTDODATE is added to show whether orig_page
has the latest data from raid disk.

We introduce a helper function uptodate_for_rmw() to simplify
the a couple conditions in handle_stripe_dirtying().

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-01-24 11:20:14 -08:00
Song Liu d7bd398e97 md/r5cache: handle alloc_page failure
RMW of r5c write back cache uses an extra page to store old data for
prexor. handle_stripe_dirtying() allocates this page by calling
alloc_page(). However, alloc_page() may fail.

To handle alloc_page() failures, this patch adds an extra page to
disk_info. When alloc_page fails, handle_stripe() trys to use these
pages. When these pages are used by other stripe (R5C_EXTRA_PAGE_IN_USE),
the stripe is added to delayed_list.

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-27 21:35:38 -08:00
Song Liu 3bddb7f8f2 md/r5cache: handle FLUSH and FUA
With raid5 cache, we committing data from journal device. When
there is flush request, we need to flush journal device's cache.
This was not needed in raid5 journal, because we will flush the
journal before committing data to raid disks.

This is similar to FUA, except that we also need flush journal for
FUA. Otherwise, corruptions in earlier meta data will stop recovery
from reaching FUA data.

slightly changed the code by Shaohua

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 17:13:49 -08:00
Song Liu 2c7da14b90 md/r5cache: sysfs entry journal_mode
With write cache, journal_mode is the knob to switch between
write-back and write-through.

Below is an example:

root@virt-test:~/# cat /sys/block/md0/md/journal_mode
[write-through] write-back
root@virt-test:~/# echo write-back > /sys/block/md0/md/journal_mode
root@virt-test:~/# cat /sys/block/md0/md/journal_mode
write-through [write-back]

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 13:27:24 -08:00
Song Liu a39f7afde3 md/r5cache: write-out phase and reclaim support
There are two limited resources, stripe cache and journal disk space.
For better performance, we priotize reclaim of full stripe writes.
To free up more journal space, we free earliest data on the journal.

In current implementation, reclaim happens when:
1. Periodically (every R5C_RECLAIM_WAKEUP_INTERVAL, 30 seconds) reclaim
   if there is no reclaim in the past 5 seconds.
2. when there are R5C_FULL_STRIPE_FLUSH_BATCH (256) cached full stripes,
   or cached stripes is enough for a full stripe (chunk size / 4k)
   (r5c_check_cached_full_stripe)
3. when there is pressure on stripe cache (r5c_check_stripe_cache_usage)
4. when there is pressure on journal space (r5l_write_stripe, r5c_cache_data)

r5c_do_reclaim() contains new logic of reclaim.

For stripe cache:

When stripe cache pressure is high (more than 3/4 stripes are cached,
or there is empty inactive lists), flush all full stripe. If fewer
than R5C_RECLAIM_STRIPE_GROUP (NR_STRIPE_HASH_LOCKS * 2) full stripes
are flushed, flush some paritial stripes. When stripe cache pressure
is moderate (1/2 to 3/4 of stripes are cached), flush all full stripes.

For log space:

To avoid deadlock due to log space, we need to reserve enough space
to flush cached data. The size of required log space depends on total
number of cached stripes (stripe_in_journal_count). In current
implementation, the writing-out phase automatically include pending
data writes with parity writes (similar to write through case).
Therefore, we need up to (conf->raid_disks + 1) pages for each cached
stripe (1 page for meta data, raid_disks pages for all data and
parity). r5c_log_required_to_flush_cache() calculates log space
required to flush cache. In the following, we refer to the space
calculated by r5c_log_required_to_flush_cache() as
reclaim_required_space.

Two flags are added to r5conf->cache_state: R5C_LOG_TIGHT and
R5C_LOG_CRITICAL. R5C_LOG_TIGHT is set when free space on the log
device is less than 3x of reclaim_required_space. R5C_LOG_CRITICAL
is set when free space on the log device is less than 2x of
reclaim_required_space.

r5c_cache keeps all data in cache (not fully committed to RAID) in
a list (stripe_in_journal_list). These stripes are in the order of their
first appearance on the journal. So the log tail (last_checkpoint)
should point to the journal_start of the first item in the list.

When R5C_LOG_TIGHT is set, r5l_reclaim_thread starts flushing out
stripes at the head of stripe_in_journal. When R5C_LOG_CRITICAL is
set, the state machine only writes data that are already in the
log device (in stripe_in_journal_list).

This patch includes a fix to improve performance by
Shaohua Li <shli@fb.com>.

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 13:26:48 -08:00
Song Liu 1e6d690b93 md/r5cache: caching phase of r5cache
As described in previous patch, write back cache operates in two
phases: caching and writing-out. The caching phase works as:
1. write data to journal
   (r5c_handle_stripe_dirtying, r5c_cache_data)
2. call bio_endio
   (r5c_handle_data_cached, r5c_return_dev_pending_writes).

Then the writing-out phase is as:
1. Mark the stripe as write-out (r5c_make_stripe_write_out)
2. Calcualte parity (reconstruct or RMW)
3. Write parity (and maybe some other data) to journal device
4. Write data and parity to RAID disks

This patch implements caching phase. The cache is integrated with
stripe cache of raid456. It leverages code of r5l_log to write
data to journal device.

Writing-out phase of the cache is implemented in the next patch.

With r5cache, write operation does not wait for parity calculation
and write out, so the write latency is lower (1 write to journal
device vs. read and then write to raid disks). Also, r5cache will
reduce RAID overhead (multipile IO due to read-modify-write of
parity) and provide more opportunities of full stripe writes.

This patch adds 2 flags to stripe_head.state:
 - STRIPE_R5C_PARTIAL_STRIPE,
 - STRIPE_R5C_FULL_STRIPE,

Instead of inactive_list, stripes with cached data are tracked in
r5conf->r5c_full_stripe_list and r5conf->r5c_partial_stripe_list.
STRIPE_R5C_FULL_STRIPE and STRIPE_R5C_PARTIAL_STRIPE are flags for
stripes in these lists. Note: stripes in r5c_full/partial_stripe_list
are not considered as "active".

For RMW, the code allocates an extra page for each data block
being updated.  This is stored in r5dev->orig_page and the old data
is read into it.  Then the prexor calculation subtracts ->orig_page
from the parity block, and the reconstruct calculation adds the
->page data back into the parity block.

r5cache naturally excludes SkipCopy. When the array has write back
cache, async_copy_data() will not skip copy.

There are some known limitations of the cache implementation:

1. Write cache only covers full page writes (R5_OVERWRITE). Writes
   of smaller granularity are write through.
2. Only one log io (sh->log_io) for each stripe at anytime. Later
   writes for the same stripe have to wait. This can be improved by
   moving log_io to r5dev.
3. With writeback cache, read path must enter state machine, which
   is a significant bottleneck for some workloads.
4. There is no per stripe checkpoint (with r5l_payload_flush) in
   the log, so recovery code has to replay more than necessary data
   (sometimes all the log from last_checkpoint). This reduces
   availability of the array.

This patch includes a fix proposed by ZhengYuan Liu
<liuzhengyuan@kylinos.cn>

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 13:26:30 -08:00
Song Liu 2ded370373 md/r5cache: State machine for raid5-cache write back mode
This patch adds state machine for raid5-cache. With log device, the
raid456 array could operate in two different modes (r5c_journal_mode):
  - write-back (R5C_MODE_WRITE_BACK)
  - write-through (R5C_MODE_WRITE_THROUGH)

Existing code of raid5-cache only has write-through mode. For write-back
cache, it is necessary to extend the state machine.

With write-back cache, every stripe could operate in two different
phases:
  - caching
  - writing-out

In caching phase, the stripe handles writes as:
  - write to journal
  - return IO

In writing-out phase, the stripe behaviors as a stripe in write through
mode R5C_MODE_WRITE_THROUGH.

STRIPE_R5C_CACHING is added to sh->state to differentiate caching and
writing-out phase.

Please note: this is a "no-op" patch for raid5-cache write-through
mode.

The following detailed explanation is copied from the raid5-cache.c:

/*
 * raid5 cache state machine
 *
 * With rhe RAID cache, each stripe works in two phases:
 *      - caching phase
 *      - writing-out phase
 *
 * These two phases are controlled by bit STRIPE_R5C_CACHING:
 *   if STRIPE_R5C_CACHING == 0, the stripe is in writing-out phase
 *   if STRIPE_R5C_CACHING == 1, the stripe is in caching phase
 *
 * When there is no journal, or the journal is in write-through mode,
 * the stripe is always in writing-out phase.
 *
 * For write-back journal, the stripe is sent to caching phase on write
 * (r5c_handle_stripe_dirtying). r5c_make_stripe_write_out() kicks off
 * the write-out phase by clearing STRIPE_R5C_CACHING.
 *
 * Stripes in caching phase do not write the raid disks. Instead, all
 * writes are committed from the log device. Therefore, a stripe in
 * caching phase handles writes as:
 *      - write to log device
 *      - return IO
 *
 * Stripes in writing-out phase handle writes as:
 *      - calculate parity
 *      - write pending data and parity to journal
 *      - write data and parity to raid disks
 *      - return IO for pending writes
 */

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 13:26:07 -08:00
Song Liu 937621c36e md/r5cache: move some code to raid5.h
Move some define and inline functions to raid5.h, so they can be
used in raid5-cache.c

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 13:25:40 -08:00
Sebastian Andrzej Siewior 29c6d1bbd7 md/raid5: Convert to hotplug state machine
Install the callbacks via the state machine and let the core invoke
the callbacks on the already online CPUs.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Neil Brown <neilb@suse.com>
Cc: linux-raid@vger.kernel.org
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160818125731.27256-10-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-06 18:30:23 +02:00
Shaohua Li 6ab2a4b806 RAID5: revert e9e4c377e2 to fix a livelock
Revert commit
e9e4c377e2f563(md/raid5: per hash value and exclusive wait_for_stripe)

The problem is raid5_get_active_stripe waits on
conf->wait_for_stripe[hash]. Assume hash is 0. My test release stripes
in this order:
- release all stripes with hash 0
- raid5_get_active_stripe still sleeps since active_stripes >
  max_nr_stripes * 3 / 4
- release all stripes with hash other than 0. active_stripes becomes 0
- raid5_get_active_stripe still sleeps, since nobody wakes up
  wait_for_stripe[0]
The system live locks. The problem is active_stripes isn't a per-hash
count. Revert the patch makes the live lock go away.

Cc: stable@vger.kernel.org (v4.2+)
Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: NeilBrown <neilb@suse.de>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-02-26 09:44:56 -08:00
Shaohua Li 27a353c026 RAID5: check_reshape() shouldn't call mddev_suspend
check_reshape() is called from raid5d thread. raid5d thread shouldn't
call mddev_suspend(), because mddev_suspend() waits for all IO finish
but IO is handled in raid5d thread, we could easily deadlock here.

This issue is introduced by
738a273 ("md/raid5: fix allocation of 'scribble' array.")

Cc: stable@vger.kernel.org (v4.1+)
Reported-and-tested-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-02-26 09:44:11 -08:00
Shaohua Li 6e74a9cfb5 raid5-cache: IO error handling
There are 3 places the raid5-cache dispatches IO. The discard IO error
doesn't matter, so we ignore it. The superblock write IO error can be
handled in MD core. The remaining are log write and flush. When the IO
error happens, we mark log disk faulty and fail all write IO. Read IO is
still allowed to run. Userspace will get a notification too and
corresponding daemon can choose setting raid array readonly for example.

Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2015-11-01 13:48:29 +11:00
Shaohua Li e6c033f79a raid5-cache: move reclaim stop to quiesce
Move reclaim stop to quiesce handling, where is safer for this stuff.

Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2015-11-01 13:48:27 +11:00
Shaohua Li 828cbe989e raid5-cache: optimize FLUSH IO with log enabled
With log enabled, bio is written to raid disks after the bio is settled
down in log disk. The recovery guarantees we can recovery the bio data
from log disk, so we we skip FLUSH IO.

Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2015-11-01 13:48:26 +11:00
Shaohua Li 0576b1c618 raid5: log reclaim support
This is the reclaim support for raid5 log. A stripe write will have
following steps:

1. reconstruct the stripe, read data/calculate parity. ops_run_io
prepares to write data/parity to raid disks
2. hijack ops_run_io. stripe data/parity is appending to log disk
3. flush log disk cache
4. ops_run_io run again and do normal operation. stripe data/parity is
written in raid array disks. raid core can return io to upper layer.
5. flush cache of all raid array disks
6. update super block
7. log disk space used by the stripe can be reused

In practice, several stripes consist of an io_unit and we will batch
several io_unit in different steps, but the whole process doesn't
change.

It's possible io return just after data/parity hit log disk, but then
read IO will need read from log disk. For simplicity, IO return happens
at step 4, where read IO can directly read from raid disks.

Currently reclaim run if there is specific reclaimable space (1/4 disk
size or 10G) or we are out of space. Reclaim is just to free log disk
spaces, it doesn't impact data consistency. The size based force reclaim
is to make sure log isn't too big, so recovery doesn't scan log too
much.

Recovery make sure raid disks and log disk have the same data of a
stripe. If crash happens before 4, recovery might/might not recovery
stripe's data/parity depending on if data/parity and its checksum
matches. In either case, this doesn't change the syntax of an IO write.
After step 3, stripe is guaranteed recoverable, because stripe's
data/parity is persistent in log disk. In some cases, log disk content
and raid disks content of a stripe are the same, but recovery will still
copy log disk content to raid disks, this doesn't impact data
consistency. space reuse happens after superblock update and cache
flush.

There is one situation we want to avoid. A broken meta in the middle of
a log causes recovery can't find meta at the head of log. If operations
require meta at the head persistent in log, we must make sure meta
before it persistent in log too. The case is stripe data/parity is in
log and we start write stripe to raid disks (before step 4). stripe
data/parity must be persistent in log before we do the write to raid
disks. The solution is we restrictly maintain io_unit list order. In
this case, we only write stripes of an io_unit to raid disks till the
io_unit is the first one whose data/parity is in log.

The io_unit list order is important for other cases too. For example,
some io_unit are reclaimable and others not. They can be mixed in the
list, we shouldn't reuse space of an unreclaimable io_unit.

Includes fixes to problems which were...
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-24 17:16:19 +11:00
Shaohua Li f6bed0ef0a raid5: add basic stripe log
This introduces a simple log for raid5. Data/parity writing to raid
array first writes to the log, then write to raid array disks. If
crash happens, we can recovery data from the log. This can speed up
raid resync and fix write hole issue.

The log structure is pretty simple. Data/meta data is stored in block
unit, which is 4k generally. It has only one type of meta data block.
The meta data block can track 3 types of data, stripe data, stripe
parity and flush block. MD superblock will point to the last valid
meta data block. Each meta data block has checksum/seq number, so
recovery can scan the log correctly. We store a checksum of stripe
data/parity to the metadata block, so meta data and stripe data/parity
can be written to log disk together. otherwise, meta data write must
wait till stripe data/parity is finished.

For stripe data, meta data block will record stripe data sector and
size. Currently the size is always 4k. This meta data record can be made
simpler if we just fix write hole (eg, we can record data of a stripe's
different disks together), but this format can be extended to support
caching in the future, which must record data address/size.

For stripe parity, meta data block will record stripe sector. It's
size should be 4k (for raid5) or 8k (for raid6). We always store p
parity first. This format should work for caching too.

flush block indicates a stripe is in raid array disks. Fixing write
hole doesn't need this type of meta data, it's for caching extension.

Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-24 17:16:19 +11:00
Shaohua Li b70abcb247 raid5: add a new state for stripe log handling
When a stripe finishes construction, we write the stripe to raid in
ops_run_io normally. With log, we do a bunch of other operations before
the stripe is written to raid. Mainly write the stripe to log disk,
flush disk cache and so on. The operations are still driven by raid5d
and run in the stripe state machine. We introduce a new state for such
stripe (trapped into log). The stripe is in this state from the time it
first enters ops_run_io (finish construction) to the time it is written
to raid. Since we know the state is only for log, we bypass other
check/operation in handle_stripe.

Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-24 17:16:19 +11:00
Shaohua Li 6d036f7d52 raid5: export some functions
Next several patches use some raid5 functions, rename them with raid5
prefix and export out.

Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-24 17:16:18 +11:00
NeilBrown c3cce6cda1 md/raid5: ensure device failure recorded before write request returns.
When a write to one of the devices of a RAID5/6 fails, the failure is
recorded in the metadata of the other devices so that after a restart
the data on the failed drive wont be trusted even if that drive seems
to be working again (maybe a cable was unplugged).

Similarly when we record a bad-block in response to a write failure,
we must not let the write complete until the bad-block update is safe.

Currently there is no interlock between the write request completing
and the metadata update.  So it is possible that the write will
complete, the app will confirm success in some way, and then the
machine will crash before the metadata update completes.

This is an extremely small hole for a racy to fit in, but it is
theoretically possible and so should be closed.

So:
 - set MD_CHANGE_PENDING when requesting a metadata update for a
   failed device, so we can know with certainty when it completes
 - queue requests that completed when MD_CHANGE_PENDING is set to
   only be processed after the metadata update completes
 - call raid_end_bio_io() on bios in that queue when the time comes.


Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31 19:43:59 +02:00
NeilBrown 34a6f80e16 md/raid5: use bio_list for the list of bios to return.
This will make it easier to splice two lists together which will
be needed in future patch.

Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31 19:43:50 +02:00
NeilBrown 2d5b569b66 md/raid5: avoid races when changing cache size.
Cache size can grow or shrink due to various pressures at
any time.  So when we resize the cache as part of a 'grow'
operation (i.e. change the size to allow more devices) we need
to blocks that automatic growing/shrinking.

So introduce a mutex.  auto grow/shrink uses mutex_trylock()
and just doesn't bother if there is a blockage.
Resizing the whole cache holds the mutex to ensure that
the correct number of new stripes is allocated.

This bug can result in some stripes not being freed when an
array is stopped.  This leads to the kmem_cache not being
freed and a subsequent array can try to use the same kmem_cache
and get confused.

Fixes: edbe83ab4c ("md/raid5: allow the stripe_cache to grow and shrink.")
Cc: stable@vger.kernel.org (4.1 - please delay until 2 weeks after release of 4.2)
Signed-off-by: NeilBrown <neilb@suse.com>
2015-07-22 14:04:15 +10:00
Yuanhan Liu e9e4c377e2 md/raid5: per hash value and exclusive wait_for_stripe
I noticed heavy spin lock contention at get_active_stripe() with fsmark
multiple thread write workloads.

Here is how this hot contention comes from. We have limited stripes, and
it's a multiple thread write workload. Hence, those stripes will be taken
soon, which puts later processes to sleep for waiting free stripes. When
enough stripes(>= 1/4 total stripes) are released, all process are woken,
trying to get the lock. But there is one only being able to get this lock
for each hash lock, making other processes spinning out there for acquiring
the lock.

Thus, it's effectiveless to wakeup all processes and let them battle for
a lock that permits one to access only each time. Instead, we could make
it be a exclusive wake up: wake up one process only. That avoids the heavy
spin lock contention naturally.

To do the exclusive wake up, we've to split wait_for_stripe into multiple
wait queues, to make it per hash value, just like the hash lock.

Here are some test results I have got with this patch applied(all test run
3 times):

`fsmark.files_per_sec'
=====================

next-20150317                 this patch
-------------------------     -------------------------
metric_value     ±stddev      metric_value     ±stddev     change      testbox/benchmark/testcase-params
-------------------------     -------------------------   --------     ------------------------------
      25.600     ±0.0              92.700     ±2.5          262.1%     ivb44/fsmark/1x-64t-4BRD_12G-RAID5-btrfs-4M-30G-fsyncBeforeClose
      25.600     ±0.0              77.800     ±0.6          203.9%     ivb44/fsmark/1x-64t-9BRD_6G-RAID5-btrfs-4M-30G-fsyncBeforeClose
      32.000     ±0.0              93.800     ±1.7          193.1%     ivb44/fsmark/1x-64t-4BRD_12G-RAID5-ext4-4M-30G-fsyncBeforeClose
      32.000     ±0.0              81.233     ±1.7          153.9%     ivb44/fsmark/1x-64t-9BRD_6G-RAID5-ext4-4M-30G-fsyncBeforeClose
      48.800     ±14.5             99.667     ±2.0          104.2%     ivb44/fsmark/1x-64t-4BRD_12G-RAID5-xfs-4M-30G-fsyncBeforeClose
       6.400     ±0.0              12.800     ±0.0          100.0%     ivb44/fsmark/1x-64t-3HDD-RAID5-btrfs-4M-40G-fsyncBeforeClose
      63.133     ±8.2              82.800     ±0.7           31.2%     ivb44/fsmark/1x-64t-9BRD_6G-RAID5-xfs-4M-30G-fsyncBeforeClose
     245.067     ±0.7             306.567     ±7.9           25.1%     ivb44/fsmark/1x-64t-4BRD_12G-RAID5-f2fs-4M-30G-fsyncBeforeClose
      17.533     ±0.3              21.000     ±0.8           19.8%     ivb44/fsmark/1x-1t-3HDD-RAID5-xfs-4M-40G-fsyncBeforeClose
     188.167     ±1.9             215.033     ±3.1           14.3%     ivb44/fsmark/1x-1t-4BRD_12G-RAID5-btrfs-4M-30G-NoSync
     254.500     ±1.8             290.733     ±2.4           14.2%     ivb44/fsmark/1x-1t-9BRD_6G-RAID5-btrfs-4M-30G-NoSync

`time.system_time'
=====================

next-20150317                 this patch
-------------------------    -------------------------
metric_value     ±stddev     metric_value     ±stddev     change       testbox/benchmark/testcase-params
-------------------------    -------------------------    --------     ------------------------------
    7235.603     ±1.2             185.163     ±1.9          -97.4%     ivb44/fsmark/1x-64t-4BRD_12G-RAID5-btrfs-4M-30G-fsyncBeforeClose
    7666.883     ±2.9             202.750     ±1.0          -97.4%     ivb44/fsmark/1x-64t-9BRD_6G-RAID5-btrfs-4M-30G-fsyncBeforeClose
   14567.893     ±0.7             421.230     ±0.4          -97.1%     ivb44/fsmark/1x-64t-3HDD-RAID5-btrfs-4M-40G-fsyncBeforeClose
    3697.667     ±14.0            148.190     ±1.7          -96.0%     ivb44/fsmark/1x-64t-4BRD_12G-RAID5-xfs-4M-30G-fsyncBeforeClose
    5572.867     ±3.8             310.717     ±1.4          -94.4%     ivb44/fsmark/1x-64t-9BRD_6G-RAID5-ext4-4M-30G-fsyncBeforeClose
    5565.050     ±0.5             313.277     ±1.5          -94.4%     ivb44/fsmark/1x-64t-4BRD_12G-RAID5-ext4-4M-30G-fsyncBeforeClose
    2420.707     ±17.1            171.043     ±2.7          -92.9%     ivb44/fsmark/1x-64t-9BRD_6G-RAID5-xfs-4M-30G-fsyncBeforeClose
    3743.300     ±4.6             379.827     ±3.5          -89.9%     ivb44/fsmark/1x-64t-3HDD-RAID5-ext4-4M-40G-fsyncBeforeClose
    3308.687     ±6.3             363.050     ±2.0          -89.0%     ivb44/fsmark/1x-64t-3HDD-RAID5-xfs-4M-40G-fsyncBeforeClose

Where,

     1x: where 'x' means iterations or loop, corresponding to the 'L' option of fsmark

     1t, 64t: where 't' means thread

     4M: means the single file size, corresponding to the '-s' option of fsmark
     40G, 30G, 120G: means the total test size

     4BRD_12G: BRD is the ramdisk, where '4' means 4 ramdisk, and where '12G' means
               the size of one ramdisk. So, it would be 48G in total. And we made a
               raid on those ramdisk

As you can see, though there are no much performance gain for hard disk
workload, the system time is dropped heavily, up to 97%. And as expected,
the performance increased a lot, up to 260%, for fast device(ram disk).

v2: use bits instead of array to note down wait queue need to wake up.

Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2015-06-17 10:00:27 +10:00
Yuanhan Liu b1b4648648 md/raid5: split wait_for_stripe and introduce wait_for_quiescent
I noticed heavy spin lock contention at get_active_stripe(), introduced
at being wake up stage, where a bunch of processes try to re-hold the
spin lock again.

After giving some thoughts on this issue, I found the lock could be
relieved(and even avoided) if we turn the wait_for_stripe to per
waitqueue for each lock hash and make the wake up exclusive: wake up
one process each time, which avoids the lock contention naturally.

Before go hacking with wait_for_stripe, I found it actually has 2
usages: for the array to enter or leave the quiescent state, and also
to wait for an available stripe in each of the hash lists.

So this patch splits the first usage off into a separate wait_queue,
wait_for_quiescent, and the next patch will turn the second usage into
one waitqueue for each hash value, and make it exclusive, to relieve
the lock contention.

v2: wake_up(wait_for_quiescent) when (active_stripes == 0)
    Commit log refactor suggestion from Neil.

Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2015-06-17 10:00:21 +10:00
NeilBrown 1b956f7a8f md/raid5: be more selective about distributing flags across batch.
When a batch of stripes is broken up, we keep some of the flags
that were per-stripe, and copy other flags from the head to all
others.

This only happens while a stripe is being handled, so many of the
flags are irrelevant.

The "SYNC_FLAGS" (which I've renamed to make it clear there are
several) and STRIPE_DEGRADED are set per-stripe and so need to be
preserved.  STRIPE_INSYNC is the only flag that is set on the head
that needs to be propagated to all others.

For safety, add a WARN_ON if others are set, except:
 STRIPE_HANDLE - this is safe and per-stripe and we are going to set
      in several cases anyway
 STRIPE_INSYNC
 STRIPE_IO_STARTED - this is just a hint and doesn't hurt.
 STRIPE_ON_PLUG_LIST
 STRIPE_ON_RELEASE_LIST - It is a point pointless for a batched
           stripe to be on one of these lists, but it can happen
           as can be safely ignored.

Signed-off-by: NeilBrown <neilb@suse.de>
2015-05-28 11:40:01 +10:00
NeilBrown d0852df543 md/raid5: close race between STRIPE_BIT_DELAY and batching.
When we add a write to a stripe we need to make sure the bitmap
bit is set.  While doing that the stripe is not locked so it could
be added to a batch after which further changes to STRIPE_BIT_DELAY
and ->bm_seq are ineffective.

So we need to hold off adding to a stripe until bitmap_startwrite has
completed at least once, and we need to avoid further changes to
STRIPE_BIT_DELAY once the stripe has been added to a batch.

If a bitmap_startwrite() completes after the stripe was added to a
batch, it will not have set the bit, only incremented a counter, so no
extra delay of the stripe is needed.

Reported-by: Shaohua Li <shli@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2015-05-28 11:34:40 +10:00
NeilBrown edbe83ab4c md/raid5: allow the stripe_cache to grow and shrink.
The default setting of 256 stripe_heads is probably
much too small for many configurations.  So it is best to make it
auto-configure.

Shrinking the cache under memory pressure is easy.  The only
interesting part here is that we put a fairly high cost
('seeks') on shrinking the cache as the cost is greater than
just having to read more data, it reduces parallelism.

Growing the cache on demand needs to be done carefully.  If we allow
fast growth, that can upset memory balance as lots of dirty memory can
quickly turn into lots of memory queued in the stripe_cache.
It is important for the raid5 block device to appear congested to
allow write-throttling to work.

So we only add stripes slowly. We set a flag when an allocation
fails because all stripes are in use, allocate at a convenient
time when that flag is set, and don't allow it to be set again
until at least one stripe_head has been released for re-use.

This means that a spurt of requests will only cause one stripe_head
to be allocated, but a steady stream of requests will slowly
increase the cache size - until memory pressure puts it back again.

It could take hours to reach a steady state.

The value written to, and displayed in, stripe_cache_size is
used as a minimum.  The cache can grow above this and shrink back
down to it.  The actual size is not directly visible, though it can
be deduced to some extent by watching stripe_cache_active.

Signed-off-by: NeilBrown <neilb@suse.de>
2015-04-22 08:00:43 +10:00
NeilBrown 5423399a84 md/raid5: change ->inactive_blocked to a bit-flag.
This allows us to easily add more (atomic) flags.

Signed-off-by: NeilBrown <neilb@suse.de>
2015-04-22 08:00:43 +10:00