Implement changes made in RapidIO specification rev.3 to LP-Serial Physical
Layer register definitions:
- use per-port register offset calculations based on LP-Serial Extended
Features Block (EFB) Register Map type (I or II) with different
per-port offset step (0x20 vs 0x40 respectfully).
- remove deprecated Parallel Physical layer definitions and related
code.
[alexandre.bounine@idt.com: fix DocBook warning for gen3 update]
Link: http://lkml.kernel.org/r/1469191173-19338-1-git-send-email-alexandre.bounine@idt.com
Link: http://lkml.kernel.org/r/1469125134-16523-12-git-send-email-alexandre.bounine@idt.com
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Tested-by: Barry Wood <barry.wood@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Current definition of map_inb() mport operations callback uses u32 type
to specify required inbound window (IBW) size. This is limiting factor
because existing hardware - tsi721 and fsl_rio, both support IBW size up
to 16GB.
Changing type of size parameter to u64 to allow IBW size configurations
larger than 4GB.
[alexandre.bounine@idt.com: remove compiler warning about size of constant]
Link: http://lkml.kernel.org/r/20160802184856.2566-1-alexandre.bounine@idt.com
Link: http://lkml.kernel.org/r/1469125134-16523-11-git-send-email-alexandre.bounine@idt.com
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix lockdep warning during device probing: move sysfs initialization out
of code protected by a spin lock.
Link: http://lkml.kernel.org/r/1469125134-16523-10-git-send-email-alexandre.bounine@idt.com
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add checking for error code returned by HW-specific mbox open routines.
Ensure that resources are properly release if failed.
This patch is applicable to kernel versions starting from v2.6.15.
Link: http://lkml.kernel.org/r/1469125134-16523-9-git-send-email-alexandre.bounine@idt.com
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add advancing transfer queue immediately from transfer submit call. DMA
performance improvement: This will start transfer without waiting for
'issue_pending' command if there is no DMA transfer in progress.
Link: http://lkml.kernel.org/r/1469125134-16523-8-git-send-email-alexandre.bounine@idt.com
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add module parameter to allow load time configuration of available
RapidIO messaging mailboxes (MBOX1 - MBOX4).
Having a messaging MBOX selector mask allows to define which MBOXes are
controlled by the mport device driver and reserve some of them for
direct use by other drivers.
Link: http://lkml.kernel.org/r/1469125134-16523-7-git-send-email-alexandre.bounine@idt.com
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Tested-by: Barry Wood <barry.wood@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add PCIe Maximum Read Request Size (MRRS) adjustment parameter to allow
users to override configuration register value set during PCIe bus
initialization.
Performance of Tsi721 device as PCIe bus master can be improved if MRRS
is set to its maximum value (4096 bytes). Some platforms have
limitations for supported MRRS and therefore the default value should be
preserved, unless it is known that given platform supports full set of
MRRS values defined by PCI Express specification.
Link: http://lkml.kernel.org/r/1469125134-16523-6-git-send-email-alexandre.bounine@idt.com
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add module parameters to allow load time configuration of DMA channels.
Depending on application, performance of DMA data transfers can benefit
from adjusted sizes of buffer descriptor ring and/or transaction
requests queue.
Having HW DMA channel selector mask allows to define which channels
(from seven available) are controlled by the mport device driver and
reserve some of them for direct use by other drivers.
Link: http://lkml.kernel.org/r/1469125134-16523-5-git-send-email-alexandre.bounine@idt.com
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Tested-by: Barry Wood <barry.wood@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update return value description for rio_dma_prep_... functions to
include error-valued pointer that can be returned by HW mport device
drivers. Return values from these functions must be checked using
IS_ERR_OR_NULL macro.
This patch is applicable to kernel versions starting from v4.6-rc1.
Link: http://lkml.kernel.org/r/1469125134-16523-4-git-send-email-alexandre.bounine@idt.com
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "RapidIO subsystem updates".
This set of patches contains RapidIO subsystem fixes and updates that
have been made since kernel v4.6. The most significant update brings
changes related to the latest revision of RapidIO specification
(rev.3.x) and introduction of next generation of RapidIO switches by IDT
(RXS1632 and RXS2448).
This patch (of 13):
This is RapidIO part of the original patch submitted by Joe Perches.
(see: https://lkml.org/lkml/2016/3/5/19)
Since commit 3cab1e7112 ("lib/vsprintf: refactor duplicate code
to special_hex_number()") %pa uses have been output with a 0x prefix.
These 0x prefixes in the formats are unnecessary.
Link: http://lkml.kernel.org/r/1469125134-16523-2-git-send-email-alexandre.bounine@idt.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add channelized messaging driver to support native RapidIO messaging
exchange between multiple senders/recipients on devices that use kernel
RapidIO subsystem services.
This device driver is the result of collaboration within the RapidIO.org
Software Task Group (STG) between Texas Instruments, Prodrive
Technologies, Nokia Networks, BAE and IDT. Additional input was
received from other members of RapidIO.org.
The objective was to create a character mode driver interface which
exposes messaging capabilities of RapidIO endpoint devices (mports)
directly to applications, in a manner that allows the numerous and
varied RapidIO implementations to interoperate.
This char mode device driver allows user-space applications to setup
messaging communication channels using single shared RapidIO messaging
mailbox.
By default this driver uses RapidIO MBOX_1 (MBOX_0 is reserved for use by
RIONET Ethernet emulation driver).
[weiyj.lk@gmail.com: rapidio/rio_cm: fix return value check in riocm_init()]
Link: http://lkml.kernel.org/r/1469198221-21970-1-git-send-email-alexandre.bounine@idt.com
Link: http://lkml.kernel.org/r/1468952862-18056-1-git-send-email-alexandre.bounine@idt.com
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Tested-by: Barry Wood <barry.wood@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix problems in uapi definitions reported by Gabriel Laskar: (see
https://lkml.org/lkml/2016/4/5/205 for details)
- move public header file rio_mport_cdev.h to include/uapi/linux directory
- change types in data structures passed as IOCTL parameters
- improve parameter checking in some IOCTL service routines
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Reported-by: Gabriel Laskar <gabriel@lse.epita.fr>
Tested-by: Barry Wood <barry.wood@idt.com>
Cc: Gabriel Laskar <gabriel@lse.epita.fr>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The change fixes improper check for a returned error value by
class_create() function, which on error returns ERR_PTR() value, thus the
original check always results in a dead code on error path.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit d4edcf0d56 ("mm/gup: Switch all callers of get_user_pages() to
not pass tsk/mm") switched get_user_pages() callers to the simpler model
where they no longer pass in the thread and mm pointer. But since then
we've merged changes to a few drivers that re-introduce use of the old
interface. Let's fix them up.
They continued to work fine (thanks to the truly disgusting macros
introduced in commit cde70140fe: "mm/gup: Overload get_user_pages()
functions"), but cause unnecessary build noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add mport character device driver to provide user space interface to
basic RapidIO subsystem operations.
See included Documentation/rapidio/mport_cdev.txt for more details.
[akpm@linux-foundation.org: fix printk warning on i386]
[dan.carpenter@oracle.com: mport_cdev: fix some error codes]
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Barry Wood <barry.wood@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add DMA channel re-initialization after an error to avoid termination of
all pending transfer requests.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Reported-by: Barry Wood <barry.wood@idt.com>
Tested-by: Barry Wood <barry.wood@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix synchronization issues found during testing using multiple DMA
transfer requests to the same channel:
- lost MSI-X interrupt notifications
- non-synchronized attempts to start DMA channel HW resulting in error
message from the driver
- cookie tracking/update race conditions resulting in incorrect DMA
transfer status report
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Reported-by: Barry Wood <barry.wood@idt.com>
Tested-by: Barry Wood <barry.wood@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Switch to returning error-valued pointer instead of simple NULL pointer.
This allows to properly identify situation when request queue is full
and therefore gives to upper layer an option to retry operation later.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace "all-or-nothing" debug output with controlled debug output using
functional block masks. This allows run time control of debug messages
through 'dbg_level' module parameter.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add device-specific callback functions to support outbound windows
mapping and release.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add RapidIO controller (mport) outbound window configuration operations.
This patch is a part of the original patch submitted by Li Yang:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/071210.html
For some reason the original part was not applied to mainline code
tree. The inbound window mapping part has been applied later during
tsi721 mport driver submission. Now goes the second part with
corresponding HW support.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add new Port Write handler registration interfaces that attach PW
handlers to local mport device objects. This is different from old
interface that attaches PW callback to individual RapidIO device. The
new interfaces are intended for use for common event handling (e.g.
hot-plug notifications) while the old interface is available for
individual device drivers.
This patch is based on patch proposed by Andre van Herk but preserves
existing per-device interface and adds lock protection for list
handling.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make rio_pw_enable() routine available to other RapidIO drivers.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make function rio_local_set_device_id() common for all components of
RapidIO subsystem.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add lock protection around doorbell list handling to prevent list
corruption on SMP platforms.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add hardware-specific device removal support for Tsi721 PCIe-to-RapidIO
bridge. To avoid excessive data type conversions, parameters passed to
some internal functions have been revised. Dynamic memory allocations
of rio_mport and rio_ops have been replaced to reduce references between
data structures.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add common mport removal support functions into the RapidIO subsystem
core.
Changes to the existing mport registration process have been made to
avoid race conditions with active subsystem interfaces immediately after
mport device registration: part of initialization code from
rio_register_mport() have been moved into separate function
rio_mport_initialize() to allow to perform mport registration as the
final step of setup process.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make net allocation/release routines available to all components of
RapidIO subsystem by moving code from rio-scan enumerator.
Make destination ID allocation method private to existing enumerator
because other enumeration methods can use their own algorithm.
Setup net device object as a parent of all RapidIO devices residing in
it and register net as a child of active mport device.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch moves per-net device list handling from rio-scan to common
RapidIO core and adds a matching device deletion routine. This makes
device object creation/removal available to other implementations of
enumeration/discovery process.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add bus-specific callback to stop RapidIO devices during a system
shutdown.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add mport query operation to report master port RapidIO capabilities and
run time configuration to upper level drivers.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add an option to configure mapping of Inbound Window without RIO-to-PCIe
address translation.
If a local memory buffer is not properly aligned to meet HW requirements
for RapidIO address mapping with address translation, caller can request
an inbound window with matching RapidIO address assigned to it. This
implementation selects RapidIO base address and size for inbound window
that are capable to accommodate the local memory buffer.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add check for attempts to request mapping of inbound RapidIO address
space that overlaps with existing active mapping windows.
Tsi721 device does not support overlapped inbound windows and SRIO
address decoding behavior is not defined in such cases.
This patch is applicable to kernel versions starting from v3.7.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove use of hardcoded setting for Maximum Read Request Size (MRRS)
value and use one set by PCIe bus driver.
Using hardcoded value can cause PCIe bus errors on platforms that have
tsi721 device on PCIe path that allows only smaller read request sizes.
This fix is applicable to kernel versions starting from v3.2.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I/O resource descriptor, 'desc' in struct resource, needs to be
initialized to zero by default. Some drivers call kmalloc() to
allocate a resource entry, but do not initialize it to zero by
memset(). Change these drivers to call kzalloc(), instead.
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
Acked-by: Helge Deller <deller@gmx.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-mm <linux-mm@kvack.org>
Cc: linux-parisc@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Link: http://lkml.kernel.org/r/1453841853-11383-10-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch fix spelling typos found in DocBook/rapidio.xml
Ths file was generated from comments in the source files,
I had to fix them, instead of the xml file.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull dmaengine updates from Vinod Koul:
"This update brings:
- the big cleanup up by Maxime for device control and slave
capabilities. This makes the API much cleaner.
- new IMG MDC driver by Andrew
- new Renesas R-Car Gen2 DMA Controller driver by Laurent along with
bunch of fixes on rcar drivers
- odd fixes and updates spread over driver"
* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (130 commits)
dmaengine: pl330: add DMA_PAUSE feature
dmaengine: pl330: improve pl330_tx_status() function
dmaengine: rcar-dmac: Disable channel 0 when using IOMMU
dmaengine: rcar-dmac: Work around descriptor mode IOMMU errata
dmaengine: rcar-dmac: Allocate hardware descriptors with DMAC device
dmaengine: rcar-dmac: Fix oops due to unintialized list in error ISR
dmaengine: rcar-dmac: Fix spinlock issues in interrupt
dmaenegine: edma: fix sparse warnings
dmaengine: rcar-dmac: Fix uninitialized variable usage
dmaengine: shdmac: extend PM methods
dmaengine: shdmac: use SET_RUNTIME_PM_OPS()
dmaengine: pl330: fix bug that cause start the same descs in cyclic
dmaengine: at_xdmac: allow muliple dwidths when doing slave transfers
dmaengine: at_xdmac: simplify channel configuration stuff
dmaengine: at_xdmac: introduce save_cc field
dmaengine: at_xdmac: wait for in-progress transaction to complete after pausing a channel
ioat: fail self-test if wait_for_completion times out
dmaengine: dw: define DW_DMA_MAX_NR_MASTERS
dmaengine: dw: amend description of dma_dev field
dmatest: move src_off, dst_off, len inside loop
...
Rename the device_control callback of the TXX9 DMA driver to terminate_all
since it's all it's really doing. That will eventually be used to retrieve
slave capabilities.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to
meet kernel coding style guidelines. This issue was reported by checkpatch.
A simplified version of the semantic patch that makes this change is as
follows (http://coccinelle.lip6.fr/):
// <smpl>
@@
identifier i;
declarer name DEFINE_PCI_DEVICE_TABLE;
initializer z;
@@
- DEFINE_PCI_DEVICE_TABLE(i)
+ const struct pci_device_id i[]
= z;
// </smpl>
[bhelgaas: add semantic patch]
Signed-off-by: Benoit Taine <benoit.taine@lip6.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Rework Tsi721 RapidIO DMA engine support to allow handling data
scatter/gather lists longer than number of hardware buffer descriptors in
the DMA channel's descriptor list.
The current implementation of Tsi721 DMA transfers requires that number of
entries in a scatter/gather list provided by a caller of
dmaengine_prep_rio_sg() should not exceed number of allocated hardware
buffer descriptors.
This patch removes the limitation by processing long scatter/gather lists
by sections that can be transferred using hardware descriptor ring of
configured size. It also introduces a module parameter
"dma_desc_per_channel" to allow run-time configuration of Tsi721 hardware
buffer descriptor rings.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Stef van Os <stef.van.os@prodrive-technologies.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add RapidIO DMA interface routines that directly use reference to the mport
device object and/or target device destination ID as parameters.
This allows to perform RapidIO DMA transfer requests by modules that do not
have an access to the RapidIO device list.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Stef van Os <stef.van.os@prodrive-technologies.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a bug fix for the situation when function tsi721_desc_get() fails
to obtain a free transaction descriptor.
The bug usually results in a memory access crash dump when data transfer
scatter-gather list has more entries than size of hardware buffer
descriptors ring. This fix ensures that error is properly returned to a
caller instead of an invalid entry.
This patch is applicable to kernel versions starting from v3.5.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Stef van Os <stef.van.os@prodrive-technologies.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org> [3.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
