Commit Graph

31 Commits

Author SHA1 Message Date
Anand Jain a4553fefb5 Btrfs: consolidate btrfs_error() to btrfs_std_error()
btrfs_error() and btrfs_std_error() does the same thing
and calls _btrfs_std_error(), so consolidate them together.
And the main motivation is that btrfs_error() is closely
named with btrfs_err(), one handles error action the other
is to log the error, so don't closely name them.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Suggested-by: David Sterba <dsterba@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2015-09-29 16:30:00 +02:00
Filipe Manana df8d116ffa Btrfs: fix fsync log replay for inodes with a mix of regular refs and extrefs
If we have an inode with a large number of hard links, some of which may
be extrefs, turn a regular ref into an extref, fsync the inode and then
replay the fsync log (after a crash/reboot), we can endup with an fsync
log that makes the replay code always fail with -EOVERFLOW when processing
the inode's references.

This is easy to reproduce with the test case I made for xfstests. Its steps
are the following:

   _scratch_mkfs "-O extref" >> $seqres.full 2>&1
   _init_flakey
   _mount_flakey

   # Create a test file with 3001 hard links. This number is large enough to
   # make btrfs start using extrefs at some point even if the fs has the maximum
   # possible leaf/node size (64Kb).
   echo "hello world" > $SCRATCH_MNT/foo
   for i in `seq 1 3000`; do
       ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_`printf "%04d" $i`
   done

   # Make sure all metadata and data are durably persisted.
   sync

   # Now remove one link, add a new one with a new name, add another new one with
   # the same name as the one we just removed and fsync the inode.
   rm -f $SCRATCH_MNT/foo_link_0001
   ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_3001
   ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_0001
   rm -f $SCRATCH_MNT/foo_link_0002
   ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_3002
   ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_3003
   $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo

   # Simulate a crash/power loss. This makes sure the next mount
   # will see an fsync log and will replay that log.

   _load_flakey_table $FLAKEY_DROP_WRITES
   _unmount_flakey

   _load_flakey_table $FLAKEY_ALLOW_WRITES
   _mount_flakey

   # Check that the number of hard links is correct, we are able to remove all
   # the hard links and read the file's data. This is just to verify we don't
   # get stale file handle errors (due to dangling directory index entries that
   # point to inodes that no longer exist).
   echo "Link count: $(stat --format=%h $SCRATCH_MNT/foo)"
   [ -f $SCRATCH_MNT/foo ] || echo "Link foo is missing"
   for ((i = 1; i <= 3003; i++)); do
       name=foo_link_`printf "%04d" $i`
       if [ $i -eq 2 ]; then
           [ -f $SCRATCH_MNT/$name ] && echo "Link $name found"
       else
           [ -f $SCRATCH_MNT/$name ] || echo "Link $name is missing"
       fi
   done
   rm -f $SCRATCH_MNT/foo_link_*
   cat $SCRATCH_MNT/foo
   rm -f $SCRATCH_MNT/foo

   status=0
   exit

The fix is simply to correct the overflow condition when overwriting a
reference item because it was wrong, trying to increase the item in the
fs/subvol tree by an impossible amount. Also ensure that we don't insert
one normal ref and one ext ref for the same dentry - this happened because
processing a dir index entry from the parent in the log happened when
the normal ref item was full, which made the logic insert an extref and
later when the normal ref had enough room, it would be inserted again
when processing the ref item from the child inode in the log.

This issue has been present since the introduction of the extrefs feature
(2012).

A test case for xfstests follows soon. This test only passes if the previous
patch titled "Btrfs: fix fsync when extend references are added to an inode"
is applied too.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-01-21 18:02:05 -08:00
David Sterba 962a298f35 btrfs: kill the key type accessor helpers
btrfs_set_key_type and btrfs_key_type are used inconsistently along with
open coded variants. Other members of btrfs_key are accessed directly
without any helpers anyway.

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
2014-09-17 13:37:12 -07:00
Sergei Trofimovich 33b98f2271 btrfs: cleanup: removed unused 'btrfs_get_inode_ref_index'
Found by uselex.rb:
> btrfs_get_inode_ref_index: [R]: exported from:
fs/btrfs/inode-item.o fs/btrfs/btrfs.o fs/btrfs/built-in.o

Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Reviewed-by: David Stebra <dsterba@suse.cz>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28 13:19:39 -08:00
Ross Kirk dd3cc16b87 btrfs: drop unused parameter from btrfs_item_nr
Remove unused eb parameter from btrfs_item_nr

Signed-off-by: Ross Kirk <ross.kirk@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-11-11 21:50:48 -05:00
Eric Sandeen 48a3b6366f btrfs: make static code static & remove dead code
Big patch, but all it does is add statics to functions which
are in fact static, then remove the associated dead-code fallout.

removed functions:

btrfs_iref_to_path()
__btrfs_lookup_delayed_deletion_item()
__btrfs_search_delayed_insertion_item()
__btrfs_search_delayed_deletion_item()
find_eb_for_page()
btrfs_find_block_group()
range_straddles_pages()
extent_range_uptodate()
btrfs_file_extent_length()
btrfs_scrub_cancel_devid()
btrfs_start_transaction_lflush()

btrfs_print_tree() is left because it is used for debugging.
btrfs_start_transaction_lflush() and btrfs_reada_detach() are
left for symmetry.

ulist.c functions are left, another patch will take care of those.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-06 15:55:23 -04:00
Tsutomu Itoh 4b90c68015 Btrfs: remove unused argument of btrfs_extend_item()
Argument 'trans' is not used in btrfs_extend_item().

Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-06 15:54:53 -04:00
Tsutomu Itoh afe5fea72b Btrfs: cleanup of function where fixup_low_keys() is called
If argument 'trans' is unnecessary in the function where
fixup_low_keys() is called, 'trans' is deleted.

Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-06 15:54:52 -04:00
Mark Fasheh f186373fef btrfs: extended inode refs
This patch adds basic support for extended inode refs. This includes support
for link and unlink of the refs, which basically gets us support for rename
as well.

Inode creation does not need changing - extended refs are only added after
the ref array is full.

Signed-off-by: Mark Fasheh <mfasheh@suse.de>
2012-10-09 09:14:45 -04:00
Chris Mason 1d4284bd6e Merge branch 'error-handling' into for-linus
Conflicts:
	fs/btrfs/ctree.c
	fs/btrfs/disk-io.c
	fs/btrfs/extent-tree.c
	fs/btrfs/extent_io.c
	fs/btrfs/extent_io.h
	fs/btrfs/inode.c
	fs/btrfs/scrub.c

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-28 20:31:37 -04:00
Chris Mason 727011e07c Btrfs: allow metadata blocks larger than the page size
A few years ago the btrfs code to support blocks lager than
the page size was disabled to fix a few corner cases in the
page cache handling.  This fixes the code to properly support
large metadata blocks again.

Since current kernels will crash early and often with larger
metadata blocks, this adds an incompat bit so that older kernels
can't mount it.

This also does away with different blocksizes for nodes and leaves.
You get a single block size for all tree blocks.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-26 16:50:37 -04:00
Jeff Mahoney 79787eaab4 btrfs: replace many BUG_ONs with proper error handling
btrfs currently handles most errors with BUG_ON. This patch is a work-in-
 progress but aims to handle most errors other than internal logic
 errors and ENOMEM more gracefully.

 This iteration prevents most crashes but can run into lockups with
 the page lock on occasion when the timing "works out."

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-22 11:52:54 +01:00
Jeff Mahoney 143bede527 btrfs: return void in functions without error conditions
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-22 01:45:34 +01:00
Tsutomu Itoh 1cd307990d Btrfs: BUG_ON is deleted from the caller of btrfs_truncate_item & btrfs_extend_item
Currently, btrfs_truncate_item and btrfs_extend_item returns only 0.
So, the check by BUG_ON in the caller is unnecessary.

Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-23 13:24:39 -04:00
Yan, Zheng a22285a6a3 Btrfs: Integrate metadata reservation with start_transaction
Besides simplify the code, this change makes sure all metadata
reservation for normal metadata operations are released after
committing transaction.

Changes since V1:

Add code that check if unlink and rmdir will free space.

Add ENOSPC handling for clone ioctl.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-05-25 10:34:50 -04:00
Yan, Zheng a571952143 Btrfs: check size of inode backref before adding hardlink
For every hardlink in btrfs, there is a corresponding inode back
reference. All inode back references for hardlinks in a given
directory are stored in single b-tree item. The size of b-tree item
is limited by the size of b-tree leaf, so we can only create limited
number of hardlinks to a given file in a directory.

The original code lacks of the check, it oops if the number of
hardlinks goes over the limit. This patch fixes the issue by adding
check to btrfs_link and btrfs_rename.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-24 09:17:31 -04:00
Yan, Zheng 13a8a7c8c4 Btrfs: do not reuse objectid of deleted snapshot/subvol
The new back reference format does not allow reusing objectid of
deleted snapshot/subvol. So we use ++highest_objectid to allocate
objectid for new snapshot/subvol.

Now we use ++highest_objectid to allocate objectid for both new inode
and new snapshot/subvolume, so this patch removes 'find hole' code in
btrfs_find_free_objectid.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-21 15:56:00 -04:00
Chris Mason b9473439d3 Btrfs: leave btree locks spinning more often
btrfs_mark_buffer dirty would set dirty bits in the extent_io tree
for the buffers it was dirtying.  This may require a kmalloc and it
was not atomic.  So, anyone who called btrfs_mark_buffer_dirty had to
set any btree locks they were holding to blocking first.

This commit changes dirty tracking for extent buffers to just use a flag
in the extent buffer.  Now that we have one and only one extent buffer
per page, this can be safely done without losing dirty bits along the way.

This also introduces a path->leave_spinning flag that callers of
btrfs_search_slot can use to indicate they will properly deal with a
path returned where all the locks are spinning instead of blocking.

Many of the btree search callers now expect spinning paths,
resulting in better btree concurrency overall.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24 16:14:28 -04:00
Christoph Hellwig b2950863c6 Btrfs: make things static and include the right headers
Shut up various sparse warnings about symbols that should be either
static or have their declarations in scope.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2008-12-02 09:54:17 -05:00
Josef Bacik aec7477b3b Btrfs: Implement new dir index format
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:05 -04:00
Chris Mason 3954401fa6 Btrfs: Add back pointers from the inode to the directory that references it
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:03:58 -04:00
Chris Mason 5f39d397df Btrfs: Create extent_buffer interface for large blocksizes
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:03:56 -04:00
Zach Brown ec6b910fb3 Btrfs: trivial include fixups
Almost none of the files including module.h need to do so,
remove them.

Include sched.h in extent-tree.c to silence a warning about cond_resched()
being undeclared.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-07-11 10:00:37 -04:00
Aneesh f1ace244c8 btrfs: Code cleanup
Attaching below is some of the code cleanups that i came across while
reading the code.

a) alloc_path already calls init_path.
b) Mention that btrfs_inode is the in memory copy.Ext4 have ext4_inode_info as
the in memory copy ext4_inode as the disk copy

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-06-13 16:18:26 -04:00
Chris Mason 6cbd557078 Btrfs: add GPLv2
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-06-12 09:07:21 -04:00
Chris Mason 1b05da2ee6 Btrfs: drop the inode map tree
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-04-10 12:13:09 -04:00
Chris Mason d6e4a428eb Btrfs: start of support for many FS volumes
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-04-06 15:37:36 -04:00
Chris Mason 5caf2a0029 Btrfs: dynamic allocation of path struct
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-04-02 11:20:42 -04:00
Chris Mason 2e635a2783 Btrfs: initial move to kernel module land
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-03-21 11:12:56 -04:00
Chris Mason e089f05c18 Btrfs: transaction handles everywhere
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-03-16 16:20:31 -04:00
Chris Mason 1e1d27017c Btrfs: add inode item
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-03-15 19:03:33 -04:00