Commit Graph

130 Commits

Author SHA1 Message Date
Olivier Guiter 93ad42020c NFC: pn533: Target mode Tx fragmentation support
In target mode, when we want to send frames larger than the max length
(PN533_CMD_DATAEXCH_DATA_MAXLEN), we have to split the frame in smaller
chunks and send them, using a specific working queue, with the TgSetMetaData
command. TgSetMetaData sets his own MI bit in the PFB.
The last chunk is sent using the TgSetData command.

Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25 16:02:24 +02:00
Olivier Guiter 3c13b244de NFC: pn533: Add support for incoming fragmented frame in target mode
This code processes, for Target Mode, incoming fragmented frames.
If the MI bit is present, we start a working queue to grab and aggregate
all the parts (using TmGetData between each parts). On the last one, as
there's no more MI bit, we jump on the usual behavior.

Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25 16:01:41 +02:00
Olivier Guiter 22953f9329 NFC: pn533: Add MI/TG bits only when in Initiator mode
The fragmentation routine (used to split big frames) could be used in
target or initiator mode (TgSetMetaData vs InDataExchange), but the
MI/TG bytes are not needed in target mode (TgSetMetaData), so we
add a check on the mode

Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25 16:01:03 +02:00
Sachin Kamat e44666b981 NFC: pn533: Staticize local symbols
Local symbols used only in this file are made static.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25 02:02:39 +02:00
Samuel Ortiz cec4b8edc9 NFC: pn533: Start listen timer from start_poll
If we start the polling loop from a listening cycle, we need to start
the corresponding timer as well.
This bug showed up after commit dfccd0f5 as it was impossible to start
from a listening cycle before it.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25 01:35:41 +02:00
Samuel Ortiz 673088fb42 NFC: pn533: Send ATR_REQ directly for active device detection
In order to improve active devices detection, we send an ATR_REQ between
each passive detection cycle. Without this algorithm, Android 4.3 based
devices running the Broadcom stack are hardly detected.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25 01:35:41 +02:00
Joe Perches 17936b43f0 NFC: Standardize logging style
Use standardized styles to minimize coding defects.

Always use nfc_<level> where feasible.
Add \n to formats where appropriate.
Typo "it it" correction.
Add #define pr_fmt where appropriate.
Remove function tracing logging messages.
Remove OOM messages.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25 01:35:39 +02:00
Joe Perches 073a625f0b NFC: Convert nfc_dev_info and nfc_dev_err to nfc_<level>
Use a more standard kernel style macro logging name.

Standardize the spacing of the "NFC: " prefix.
Add \n to uses, remove from macro.
Fix the defective uses that already had a \n.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25 01:35:39 +02:00
Joe Perches b48348395f NFC: Replace nfc_dev_dbg with dev_dbg
Use the generic kernel function instead of a home-grown
one that does the same thing.

Add \n to uses not at the macro.  Don't add \n where
the nfc_dev_dbg macro mistakenly had them already.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25 01:35:39 +02:00
Samuel Ortiz dfccd0f580 NFC: pn533: Add some polling entropy
By not always starting the polling loop from the same modulation, we
avoid entering infinite loops where devices exporting 2 targets (on 2
different modulations) get the same target activated over and over.
If this target is not readable (e.g. a wallet emulating a tag), we will
stay in an error loop for ever.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14 00:35:19 +02:00
Samuel Ortiz 46f793b041 NFC: pn533: Add delay between each poll frame
It seems that some pn533 firmwares go belly up when being asked to send
poll frames too frequently. Adding a 10ms delay between each of them
calm the chip down and prevent it from crashing.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14 00:35:19 +02:00
Olivier Guiter 56a63c82cf NFC: pn533: Store the correct frame size (normal vs ext)
The extended information frame are sent by PN533 to exchange frames
larger than 255 bytes. These extended frame are very close from the
standard ones except for the header size length. On each incoming
frame, we set the correct header length, and we do that only for the
standard pn533 chipsets as the acr122 does not seem to support extended
frames properly.

Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14 00:35:18 +02:00
Olivier Guiter 963a82e07d NFC: pn533: Split large Tx frames in chunks
On sending large frames (size > 262), we split it in multiple chunks and
send them asynchronously with MI bit.

Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14 00:35:18 +02:00
Olivier Guiter 1575b9d866 NFC: pn533: Add extended information frame decoding support
Extended Information frames are slightly different from standard frames
as they can (theorically) handle datas up tu 64kB. PN533 firmware only
supports packet data up to 265 (incl. TFI byte)
This kind of frame are used when the pn533 wants to exchange more than
255 bytes, and this patch handles the reception of such frames.

Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14 00:35:18 +02:00
Samuel Ortiz 3a8eab39ac NFC: pn533: Enable AUTO RFCA
The AUTO RFCA bit forbids the pn533 chipset to turn its radio on
whenever an external field is present.
Without this bit set, some devices seems to get over flood by the
pn533 rf field and thus become hardly detectable.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14 00:35:18 +02:00
Samuel Ortiz 5eef484561 NFC: pn533: Unconditionaly select the highest p2p bit rate
p2p devices must be able to support 424 kbps, so we should always select
that bitrate in initiator mode.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14 00:35:18 +02:00
Samuel Ortiz a94e10f7d7 NFC: pn533: Request System code from SENSF_REQ
Some devices are getting confused when not being asked for their system
code with type F.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14 00:35:17 +02:00
Samuel Ortiz 17e9d9d437 NFC: pn533: Fix the pn533 polling loop
By turning the radio off after each failed polling try, we dramatically
improve the pn533 polling loop efficiency.
Without this fix, all Android phones running the broadcom NFC stack are
almost never detected.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14 00:35:17 +02:00
Samuel Ortiz f1abed171f NFC: pn533: Fix hardware busy loop when establishing the LLCP link
By using the standard setting for the regular pn533 dongles, we no
longer wait for ever for an ATR_RES. Without this, a failing ATR_REQ
will put the hardware into a busy loop, constantly waiting for an
ATR_RES.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14 00:35:17 +02:00
Linus Torvalds 496322bc91 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "This is a re-do of the net-next pull request for the current merge
  window.  The only difference from the one I made the other day is that
  this has Eliezer's interface renames and the timeout handling changes
  made based upon your feedback, as well as a few bug fixes that have
  trickeled in.

  Highlights:

   1) Low latency device polling, eliminating the cost of interrupt
      handling and context switches.  Allows direct polling of a network
      device from socket operations, such as recvmsg() and poll().

      Currently ixgbe, mlx4, and bnx2x support this feature.

      Full high level description, performance numbers, and design in
      commit 0a4db187a9 ("Merge branch 'll_poll'")

      From Eliezer Tamir.

   2) With the routing cache removed, ip_check_mc_rcu() gets exercised
      more than ever before in the case where we have lots of multicast
      addresses.  Use a hash table instead of a simple linked list, from
      Eric Dumazet.

   3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from
      Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski,
      Marek Puzyniak, Michal Kazior, and Sujith Manoharan.

   4) Support reporting the TUN device persist flag to userspace, from
      Pavel Emelyanov.

   5) Allow controlling network device VF link state using netlink, from
      Rony Efraim.

   6) Support GRE tunneling in openvswitch, from Pravin B Shelar.

   7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from
      Daniel Borkmann and Eric Dumazet.

   8) Allow controlling of TCP quickack behavior on a per-route basis,
      from Cong Wang.

   9) Several bug fixes and improvements to vxlan from Stephen
      Hemminger, Pravin B Shelar, and Mike Rapoport.  In particular,
      support receiving on multiple UDP ports.

  10) Major cleanups, particular in the area of debugging and cookie
      lifetime handline, to the SCTP protocol code.  From Daniel
      Borkmann.

  11) Allow packets to cross network namespaces when traversing tunnel
      devices.  From Nicolas Dichtel.

  12) Allow monitoring netlink traffic via AF_PACKET sockets, in a
      manner akin to how we monitor real network traffic via ptype_all.
      From Daniel Borkmann.

  13) Several bug fixes and improvements for the new alx device driver,
      from Johannes Berg.

  14) Fix scalability issues in the netem packet scheduler's time queue,
      by using an rbtree.  From Eric Dumazet.

  15) Several bug fixes in TCP loss recovery handling, from Yuchung
      Cheng.

  16) Add support for GSO segmentation of MPLS packets, from Simon
      Horman.

  17) Make network notifiers have a real data type for the opaque
      pointer that's passed into them.  Use this to properly handle
      network device flag changes in arp_netdev_event().  From Jiri
      Pirko and Timo Teräs.

  18) Convert several drivers over to module_pci_driver(), from Peter
      Huewe.

  19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a
      O(1) calculation instead.  From Eric Dumazet.

  20) Support setting of explicit tunnel peer addresses in ipv6, just
      like ipv4.  From Nicolas Dichtel.

  21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet.

  22) Prevent a single high rate flow from overruning an individual cpu
      during RX packet processing via selective flow shedding.  From
      Willem de Bruijn.

  23) Don't use spinlocks in TCP md5 signing fast paths, from Eric
      Dumazet.

  24) Don't just drop GSO packets which are above the TBF scheduler's
      burst limit, chop them up so they are in-bounds instead.  Also
      from Eric Dumazet.

  25) VLAN offloads are missed when configured on top of a bridge, fix
      from Vlad Yasevich.

  26) Support IPV6 in ping sockets.  From Lorenzo Colitti.

  27) Receive flow steering targets should be updated at poll() time
      too, from David Majnemer.

  28) Fix several corner case regressions in PMTU/redirect handling due
      to the routing cache removal, from Timo Teräs.

  29) We have to be mindful of ipv4 mapped ipv6 sockets in
      upd_v6_push_pending_frames().  From Hannes Frederic Sowa.

  30) Fix L2TP sequence number handling bugs, from James Chapman."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits)
  drivers/net: caif: fix wrong rtnl_is_locked() usage
  drivers/net: enic: release rtnl_lock on error-path
  vhost-net: fix use-after-free in vhost_net_flush
  net: mv643xx_eth: do not use port number as platform device id
  net: sctp: confirm route during forward progress
  virtio_net: fix race in RX VQ processing
  virtio: support unlocked queue poll
  net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit
  Documentation: Fix references to defunct linux-net@vger.kernel.org
  net/fs: change busy poll time accounting
  net: rename low latency sockets functions to busy poll
  bridge: fix some kernel warning in multicast timer
  sfc: Fix memory leak when discarding scattered packets
  sit: fix tunnel update via netlink
  dt:net:stmmac: Add dt specific phy reset callback support.
  dt:net:stmmac: Add support to dwmac version 3.610 and 3.710
  dt:net:stmmac: Allocate platform data only if its NULL.
  net:stmmac: fix memleak in the open method
  ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available
  net: ipv6: fix wrong ping_v6_sendmsg return value
  ...
2013-07-09 18:24:39 -07:00
Olivier Guiter 86eca4e71f NFC: pn533: Fix ACR122 related debug output
Instead of dumping ACR122 frames as errors, we use the print_hex_dump()
dynamic debug APIs.
We also print an accurate IC version, as the ACR122 is pn532 based.

Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:45:03 +02:00
Samuel Ortiz 0b456c418a NFC: Remove the static supported_se field
Supported secure elements are typically found during a discovery process
initiated when the NFC controller is up and running. For a given NFC
chipset there can be many configurations (embedded SE or not, with or
without a SIM card wired to the NFC controller SWP interface, etc...) and
thus driver code will never know before hand which SEs are available.
So we remove this field, it will be replaced by a real SE discovery
mechanism.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:44:19 +02:00
Samuel Ortiz 322bce957e NFC: pn533: Copy NFCID2 through ATR_REQ
When using NFC-F we should copy the NFCID2 buffer that we got from
SENSF_RES through the ATR_REQ NFCID3 buffer. Not doing so violates
NFC Forum digital requirement #189.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:44:18 +02:00
Samuel Ortiz 31c44464ac NFC: pn533: Use 0x3 for SENSF_REQ Time Slot Number (TSN)
LLCP validation requires TSN to be 0x03 for type F.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:44:17 +02:00
Wei Yongjun 4674d0fecb NFC: pn533: Fix error return code in pn533_probe()
Fix to return -ENOMEM in the nfc device alloc error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 00:18:58 +02:00
Masanari Iida 8b513d0cf6 treewide: Fix typo in printk
Correct spelling typo in various part of drivers

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-05-28 12:02:13 +02:00
Samuel Ortiz 60d9edd50b NFC: pn533: Turn radio on and off when bringing the device up and down
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:11 +02:00
Marina Makienko 7c5a54fb86 NFC: pn533: Add missing usb_put_dev
Add missing usb_put_dev on failure path in pn533_probe().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Marina Makienko <makienko@ispras.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:10 +02:00
Waldemar Rymarkiewicz 495af72e14 NFC: pn533: Increase version number
Major features added in 0.2 version:

* frame ops added to support wider set of devices
* support of ACS ACR122U

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:08 +02:00
Waldemar Rymarkiewicz 96aac226a4 NFC: pn533: Remove unused pn533_cmd_complete_t
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:08 +02:00
Waldemar Rymarkiewicz 10cff29af6 NFC: pn533: Add pn533_abort_cmd procedure
pn533_abort_cmd() aborts last command sent to the controller
and cancels already requested urb.

As ACR122U does not support any mechanism (as ACK for standard
PN533) which aborts last command this cannot be issued for this
device. Otherwise, acr122u will behave in an unstable way.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:07 +02:00
Waldemar Rymarkiewicz 53cf48399a NFC: pn533: Add support for ACS ACR122U reader
ACS ACR122U is an USB NFC reader, PC/SC and CCID compilant, based
on NXP PN532 chip.

Internally, it's build of MCU, PN532 and an antenna. MCU makes the
device CCID and PC/SC compilant and provide USB connection.

In this achitecture, a host cannot talk directly to PN532 and must
rely on MCU. Luckily, MCU exposes pseud-APDU through PC/SC Escape
mechanism which let the host to transmit standard PN532 commands
directly to PN532 chip with some limitations.

The frame roughly looks like:

    CCID header    |          APDU header           |    PN532 header
(pc_to_rdr_escape) |  (pseudo apdu Direct Tramsmit) | (len, TFI, cmd, params)

Accordign to limitations, ACR122U does't provide any mechanism to
abort last issued command.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:07 +02:00
Waldemar Rymarkiewicz 58520373d8 NFC: pn533: Add protocol type for frame ops
As not all devices require ACK confirmation of every request sent to the
controller, differentiate two protocol types.

First one, request-ack-response and the second one request-response type.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:06 +02:00
Waldemar Rymarkiewicz f87bc9fb62 NFC: pn533: Move wq_in_error to cmd context
Rename 'wq_in_error' field to more relevant 'status'
and move it to cmd context struct.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:06 +02:00
Waldemar Rymarkiewicz d5590bba37 NFC: pn533: Re-group fields in struct pn533
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:05 +02:00
Waldemar Rymarkiewicz c79490e1b5 NFC: pn533: Avoid function declarations
Reorder code to avoid functions declaration.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:05 +02:00
Waldemar Rymarkiewicz ddf19d206f NFC: pn533: Simplify __pn533_send_frame_async
In all cases (send_cmd_async, send_data_async and send_sync)
pn533_send_async_complete() handles all responses internally,
so there is no need to pass this as a callback.

Cmd context is passed to __pn533_send_frame_async in all the
cases as well. It's already kept in struct pn533 which is
available all the time the device is attached. So we can make
use of it instead.

Therefore, cmd_complete and cmd_complete_arg are no needed any more.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:04 +02:00
Waldemar Rymarkiewicz 140ef7f6b0 NFC: pn533: Fix incorrect kfree of complete args
We must free 'cmd_complete_mi_arg' and not 'cmd_complete_arg'
when getting send error handling fragmented response.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:04 +02:00
Waldemar Rymarkiewicz 4b2a953276 NFC: pn533: Remove redundant cmd_ prefix in the struct
'cmd->code' looks better then 'cmd->cmd_code'

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:03 +02:00
Waldemar Rymarkiewicz 2c206fb7fe NFC: pn533: Keep cmd context in pn533 struct
Keep cmd context in pn533 struct instead of only cmd code.
The context already includes cmd_code.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:03 +02:00
Waldemar Rymarkiewicz 4231604b3e NFC: pn533: Optimise issued cmd context tracking
Use struct pn533_cmd instead of pn533_send_async_complete_arg
to track the context of the issued cmd.

This way pn533_send_async_complete_arg struct is no needed
anymore. Just move issuer complete callback to pn533_cmd struct.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:02 +02:00
Waldemar Rymarkiewicz 0ce1fbdd60 NFC: pn533: Fix memleak while scheduling next cmd
In case of error from __pn533_send_frame_async() while sending
next cmd from the queue (cmd_wq), cmd->req, cmd->resp and
cmd->arg pointers won't be freed.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:02 +02:00
Waldemar Rymarkiewicz f75c291361 NFC: pn533: Rename pn533_fw_reset appropriately
Define explicitely it is Pasori specific reset command.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:01 +02:00
Waldemar Rymarkiewicz e70b96e95b NFC: pn533: Update copyrights note
Remove duplicated authors info from the header as well.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:01 +02:00
Waldemar Rymarkiewicz 95cb9e1023 NFC: pn533: Fix div by zero while stopping polling
Depends on timing division by zero can happen when user stops
polling.

pn533_stop_poll() resets modulation counter on stop_poll, but
meanwhile we get response for last poll request and try, despite
of stop poll request, to schedule next modulation for polling.

Log message:
[345.922515] pn533 1-1.3:1.0: pn533_stop_poll
[345.928314] pn533 1-1.3:1.0: pn533_send_ack
[345.932769] pn533 1-1.3:1.0: Received a frame.
[345.937438] PN533 RX: 00 00 ff 03 fd d5 4b 00 e0 00
[345.942840] pn533 1-1.3:1.0: pn533_poll_complete
[345.947753] pn533 1-1.3:1.0: pn533_start_poll_complete
[345.953186] Division by zero in kernel.
[345.957244] [<c001b38c>] (unwind_backtrace+0x0/0xf0)
[345.965698] [<c0260e78>] (Ldiv0+0x8/0x10)
[345.974060] [<c0260e60>] (__aeabi_idivmod+0x8/0x18)
[345.983978] [<c02e0064>] (pn533_poll_complete+0x3c0/0x500)
[345.994903] [<c02df690>] (pn533_send_async_complete+0x7c/0xc0)
[346.005828] [<c02e028c>] (pn533_wq_cmd_complete+0x1c/0x34)
[346.016113] [<c005d134>] (process_one_work+0x1ac/0x57c)
[346.025848] [<c005d85c>] (worker_thread+0x168/0x42c)
[346.034576] [<c00620c0>] (kthread+0xa4/0xb0)

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:00 +02:00
Waldemar Rymarkiewicz a45e1c8d17 NFC: pn533: Print out response status bits in hex
For better debugging as the codes are defined in hex in the spec.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:00 +02:00
Waldemar Rymarkiewicz 63123108f4 NFC: pn533: Reword all std frame logic funct
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:00 +02:00
Samuel Ortiz e279f84f30 NFC: pn533: Use dynamic debug for pn533 hex dumps
Those can be very verbose and we only want them when debugging pn533.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:28:56 +02:00
Thierry Escande 52f2eaeec1 NFC: pn533: Fix target polling mode
Remove unneeded bitwise OR operator on uninitialized sk_buff data

Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-08 12:18:48 +01:00
Waldemar Rymarkiewicz 2323e6fc62 nfc: pn533: Remove unreachable code
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-29 18:06:12 +01:00