Commit Graph

1569 Commits

Author SHA1 Message Date
Wolfram Sang 1e4f0b8257 i2c: mxs: disable QUEUE when sending is done
Since the last fixes to this driver ensure now the queue termination is
done correctly, we can finally disable the queue after a transfer
without problems. The gain is that it will only be reenabled after the
next transfer is fully set up. Before, the queue was running all the
time and if the setup of the next message was interrupted by another
thread, an incomplete buffer could have been sent, padded with zeroes.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-04-27 16:13:29 +02:00
Wolfram Sang c95eeae9e3 i2c: mxs: handle spurious interrupt
After an error interrupt setting cmd->err, I see another interrupt that
the data engine is empty which clears cmd->err before being processed.
So, clear cmd->err at the beginning of a transfer only to handle these
consecutive interrupts.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-04-25 22:59:44 +02:00
Tomoya MORINAGA 0964071367 i2c-eg20t: Modify MODULE_AUTHOR's email address
Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-04-22 21:29:06 +02:00
Tomoya MORINAGA 8a52f9f347 i2c-eg20t: change timeout value 50msec to 1000msec
Currently, during i2c works alone, wait-event timeout is not occurred.
However, as CPU load increases, timeout occurs frequently.
So, I modified like this patch.
Modifying like this patch, I've never seen the timeout event with high
load test.

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-04-22 21:29:06 +02:00
Alok Chauhan f70893d083 i2c: tegra: Add delay before resetting the controller after NACK
NACK interrupt is generated before I2C controller generates the STOP
condition on bus. Because of this reset of controller is happening
before I2C controller could complete STOP condition. So wait for some
time before resetting the controller so that STOP condition has
delivered properly on bus.

Added delay of 2 clock period before resetting the controller in case of
NACK error.

Signed-off-by: Alok Chauhan <alokc@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>

[wsa: Reworded the commit msg and code comment a bit]

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-04-22 21:29:05 +02:00
Roland Stigge 6c557cfee0 i2c: pnx: Disable clk in suspend
In the driver's suspend function, clk_enable() was used instead of
clk_disable(). This is corrected with this patch.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
CC: stable@vger.kernel.org

[wsa: reworded commit header slightly]

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-04-22 21:29:05 +02:00
Kristen Carlson Accardi 3a48d1c08f i2c: prevent spurious interrupt on Designware controllers
Don't call i2c_enable on resume because it causes a spurious
interrupt.

Signed-off-by:  Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-10 08:09:03 -07:00
Linus Torvalds 0195c00244 Disintegrate and delete asm/system.h
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAT3NKzROxKuMESys7AQKElw/+JyDxJSlj+g+nymkx8IVVuU8CsEwNLgRk
 8KEnRfLhGtkXFLSJYWO6jzGo16F8Uqli1PdMFte/wagSv0285/HZaKlkkBVHdJ/m
 u40oSjgT013bBh6MQ0Oaf8pFezFUiQB5zPOA9QGaLVGDLXCmgqUgd7exaD5wRIwB
 ZmyItjZeAVnDfk1R+ZiNYytHAi8A5wSB+eFDCIQYgyulA1Igd1UnRtx+dRKbvc/m
 rWQ6KWbZHIdvP1ksd8wHHkrlUD2pEeJ8glJLsZUhMm/5oMf/8RmOCvmo8rvE/qwl
 eDQ1h4cGYlfjobxXZMHqAN9m7Jg2bI946HZjdb7/7oCeO6VW3FwPZ/Ic75p+wp45
 HXJTItufERYk6QxShiOKvA+QexnYwY0IT5oRP4DrhdVB/X9cl2MoaZHC+RbYLQy+
 /5VNZKi38iK4F9AbFamS7kd0i5QszA/ZzEzKZ6VMuOp3W/fagpn4ZJT1LIA3m4A9
 Q0cj24mqeyCfjysu0TMbPtaN+Yjeu1o1OFRvM8XffbZsp5bNzuTDEvviJ2NXw4vK
 4qUHulhYSEWcu9YgAZXvEWDEM78FXCkg2v/CrZXH5tyc95kUkMPcgG+QZBB5wElR
 FaOKpiC/BuNIGEf02IZQ4nfDxE90QwnDeoYeV+FvNj9UEOopJ5z5bMPoTHxm4cCD
 NypQthI85pc=
 =G9mT
 -----END PGP SIGNATURE-----

Merge tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system

Pull "Disintegrate and delete asm/system.h" from David Howells:
 "Here are a bunch of patches to disintegrate asm/system.h into a set of
  separate bits to relieve the problem of circular inclusion
  dependencies.

  I've built all the working defconfigs from all the arches that I can
  and made sure that they don't break.

  The reason for these patches is that I recently encountered a circular
  dependency problem that came about when I produced some patches to
  optimise get_order() by rewriting it to use ilog2().

  This uses bitops - and on the SH arch asm/bitops.h drags in
  asm-generic/get_order.h by a circuituous route involving asm/system.h.

  The main difficulty seems to be asm/system.h.  It holds a number of
  low level bits with no/few dependencies that are commonly used (eg.
  memory barriers) and a number of bits with more dependencies that
  aren't used in many places (eg.  switch_to()).

  These patches break asm/system.h up into the following core pieces:

    (1) asm/barrier.h

        Move memory barriers here.  This already done for MIPS and Alpha.

    (2) asm/switch_to.h

        Move switch_to() and related stuff here.

    (3) asm/exec.h

        Move arch_align_stack() here.  Other process execution related bits
        could perhaps go here from asm/processor.h.

    (4) asm/cmpxchg.h

        Move xchg() and cmpxchg() here as they're full word atomic ops and
        frequently used by atomic_xchg() and atomic_cmpxchg().

    (5) asm/bug.h

        Move die() and related bits.

    (6) asm/auxvec.h

        Move AT_VECTOR_SIZE_ARCH here.

  Other arch headers are created as needed on a per-arch basis."

Fixed up some conflicts from other header file cleanups and moving code
around that has happened in the meantime, so David's testing is somewhat
weakened by that.  We'll find out anything that got broken and fix it..

* tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits)
  Delete all instances of asm/system.h
  Remove all #inclusions of asm/system.h
  Add #includes needed to permit the removal of asm/system.h
  Move all declarations of free_initmem() to linux/mm.h
  Disintegrate asm/system.h for OpenRISC
  Split arch_align_stack() out from asm-generic/system.h
  Split the switch_to() wrapper out of asm-generic/system.h
  Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h
  Create asm-generic/barrier.h
  Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h
  Disintegrate asm/system.h for Xtensa
  Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt]
  Disintegrate asm/system.h for Tile
  Disintegrate asm/system.h for Sparc
  Disintegrate asm/system.h for SH
  Disintegrate asm/system.h for Score
  Disintegrate asm/system.h for S390
  Disintegrate asm/system.h for PowerPC
  Disintegrate asm/system.h for PA-RISC
  Disintegrate asm/system.h for MN10300
  ...
2012-03-28 15:58:21 -07:00
Linus Torvalds d2a2fc18d9 Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull i2c updates from Jean Delvare.

Fix up trivial conflict in drivers/i2c/busses/i2c-gpio.c due to include
file cleanup clashing with DT support addition (which did the same
cleanup)

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c-algo-bit: Don't resched on clock stretching
  i2c: Update the FSF address
  i2c: Convert drivers/i2c/muxes/* to use module_i2c_driver()
  i2c-i801: Use usleep_range to wait for command completion
  i2c-i801: Add device IDs for Intel Lynx Point
  i2c-isch: Decrease delay in command completion check loop
  i2c-gpio: Use linux/gpio.h rather than asm/gpio.h
2012-03-28 14:12:15 -07:00
Linus Torvalds 09893ee845 ARM: More device tree support updates
This branch contains a number of updates for device tree support on
 several ARM platforms, in particular:
 
 * AT91 continues the device tree conversion adding support for a number of
   on-chip drivers and other functionality
 * ux500 adds probing of some of the core SoC blocks through device tree
 * Initial device tree support for ST SPEAr600 platforms
 * kirkwood continues the conversion to device-tree probing
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPcp12AAoJEIwa5zzehBx3c2oQAKkHhJFxYFaUSfAqUNQJtyLP
 ntNyjANchckGcmoGFRRn5q17leSW+GsPopeJF0uTSOq5xojrQJJnrfKCQmgTtdzt
 KiD9qJqF3bsM5PxdjkeQljiAirPZSKvyA6gZaPKozZb+NMk3ZMd3hYYi3j3EWR/c
 8C9HzwyuXUOKOQ1tHuQHEYnLAtcdVTpUnDGsQItD2Shw5H+AcoN1T00z6kWtXYoJ
 z/sFtBVvPxqozEEWbTEg2vm0XfT2ENlOIfHoOj+G2EfcVTjh4pSoD0TXwS11vjfX
 UEniGsdCSkQn0yKVuuLTNKy7BPkWXBUTxy6duIQMSs/57lgFEb9/+f5kgAol+Sdi
 OeUW4gYkZ8uAk2zOD4p1TGDZT/YHWQ2X3Wq2EhYNsYjZgbNCTlIIocet8jZ6Zfcm
 f7DdADS8ot8xFcZxMH7CFJ28cmEjhyGMSrMcrAq7HXrkX0ppFutF0CYkY/43uQ/h
 AGmP9wKi38PB1eXK44eAF25fRvT7ty7CiCBT88i8UZ3unj6raVbsGfqhvf5PbCki
 oX8dKFjPRRE4bj+8Si7LCTR00AIFMLxuftJw45L4syk+l6Y0y+b0HMBE3E/q7bbR
 dLBu3V/HHVMnuZv6vVgvI+dkZ9R6v2ychfoyKNh/AKvgXmr90diYbT0XAkcfSPk7
 +yy69EZA59UvLTxt9BmN
 =wiKV
 -----END PGP SIGNATURE-----

Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: More device tree support updates" from Olof Johansson:
 "This branch contains a number of updates for device tree support on
  several ARM platforms, in particular:

   * AT91 continues the device tree conversion adding support for a
     number of on-chip drivers and other functionality
   * ux500 adds probing of some of the core SoC blocks through device
     tree
   * Initial device tree support for ST SPEAr600 platforms
   * kirkwood continues the conversion to device-tree probing"

Manually merge arch/arm/mach-ux500/Kconfig due to MACH_U8500 rename, and
drivers/usb/gadget/at91_udc.c due to header file include cleanups.

Also do an "evil merge" for the MACH_U8500 config option rename that the
affected RMI4 touchscreen driver in staging.  It's called MACH_MOP500
now, and it was missed during previous merges.

* tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  ARM: SPEAr600: Add device-tree support to SPEAr600 boards
  ARM: ux500: Provide local timer support for Device Tree
  ARM: ux500: Enable PL022 SSP Controller in Device Tree
  ARM: ux500: Enable PL310 Level 2 Cache Controller in Device Tree
  ARM: ux500: Enable PL011 AMBA UART Controller for Device Tree
  ARM: ux500: Enable Cortex-A9 GIC (Generic Interrupt Controller) in Device Tree
  ARM: ux500: db8500: list most devices in the snowball device tree
  ARM: ux500: split dts file for snowball into generic part
  ARM: ux500: combine the board init functions for DT boot
  ARM: ux500: Initial Device Tree support for Snowball
  ARM: ux500: CONFIG: Enable Device Tree support for future endeavours
  ARM: kirkwood: use devicetree for rtc-mv
  ARM: kirkwood: rtc-mv devicetree bindings
  ARM: kirkwood: fdt: define uart[01] as disabled, enable uart0
  ARM: kirkwood: fdt: facilitate new boards during fdt migration
  ARM: kirkwood: fdt: absorb kirkwood_init()
  ARM: kirkwood: fdt: use mrvl ticker symbol
  ARM: orion: wdt: use resource vice direct access
  ARM: Kirkwood: Remove tclk from kirkwood_asoc_platform_data.
  ARM: orion: spi: remove enable_clock_fix which is not used
  ...
2012-03-28 12:34:33 -07:00
David Howells 9ffc93f203 Remove all #inclusions of asm/system.h
Remove all #inclusions of asm/system.h preparatory to splitting and killing
it.  Performed with the following command:

perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`

Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-28 18:30:03 +01:00
Linus Torvalds 66f03c614c ARM: device tree work
Most of these patches convert code from using static platform data to
 describing the hardware in the device tree. This is only the first
 half of the changes for v3.4 because a lot of patches for this topic
 came in the last week before the merge window.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUAT24/a2CrR//JCVInAQKYdxAAn+fs7yv+P4OWG/nIhGdnPw8MQ2u9fvqA
 pmNL3Jy0eVowbENDcRRZgfhZ3ZlWBGUYym7J1uiFSrmHyJPoMtMvVg0miPYxLlpE
 vr8bzuSfGOUOa7+Fk6kFVGxS3ZHZTsDvuhMQUIt/2jHgOaesqPvZ1FYFAj1bZ1fm
 2CnQoF3OfnWAngHtoBXtgJxp/1r7+pHlGVbPYpmtHtikl45NmhqWza58aSQBilr+
 S90cVeZs91gyveoxz5N+YrO8+Dx05te3mF+dwWuKC6aDC6d76fjLak54AvYv2Pzr
 I6iaQPV8GIsXi5R4wptmVQAc5mbk5oktxJ7hCIHrmaBiAXygoVAYoqcuumoO3QDb
 QKz10ga1yBYcKYrKvBzKxQrChw53IPU6po+Dd66ALJvLlc3KONksiJs5T/5Wma7P
 v3VPcmZwPrJQbz+fQu6FysHeYQY+wfiR5E9Yz2OXs+PtkSy9OYsFFirdhJeWUPgA
 ASjNLs1y5rxqrJBt7cjyQiBbIf1awGWyzF0yUNrlYHxmhJ6vcxHfrGoW38VRRCTM
 8+JcxOHPRYrPfY7we6zsOn7ZeTWJduoUEeTxDnVS3w3zUIKCvkvkpHaJDvHvYcui
 T/yJnXdUD2O3E5+5k/5cCyde8RbSB9gKsNpIMNkK5BLSmbux3C72dE0sMQFysahI
 hS8aDCDUQUU=
 =fMC+
 -----END PGP SIGNATURE-----

Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: device tree work" from Arnd Bergmann:
 "Most of these patches convert code from using static platform data to
  describing the hardware in the device tree.  This is only the first
  half of the changes for v3.4 because a lot of patches for this topic
  came in the last week before the merge window.

  Signed-off-by: Arnd Bergmann <arnd@arndb.de>"

Fix up trivial conflicts in arch/arm/mach-vexpress/{Kconfig,core.h}

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (86 commits)
  Document: devicetree: add OF documents for arch-mmp
  ARM: dts: append DTS file of pxa168
  ARM: mmp: append OF support on pxa168
  ARM: mmp: enable rtc clk in pxa168
  i2c: pxa: add OF support
  serial: pxa: add OF support
  arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board
  ARM: OMAP2+: Remove extra ifdefs for board-generic
  ARM: OMAP2+: Fix build error when only ARCH_OMAP2/3 or 4 is selected
  ASoC: DT: Add digital microphone binding to PAZ00 board.
  ARM: dt: Add ARM PMU to tegra*.dtsi
  ARM: at91: at91sam9x5cm/dt: add leds support
  ARM: at91: usb_a9g20/dt: add gpio-keys support
  ARM: at91: at91sam9m10g45ek/dt: add gpio-keys support
  ARM: at91: at91sam9m10g45ek/dt: add leds support
  ARM: at91: usb_a9g20/dt: add leds support
  ARM: at91/pio: add new PIO3 features
  ARM: at91: add sam9_smc.o to at91sam9x5 build
  ARM: at91/tc/clocksource: Add 32 bit variant to Timer Counter
  ARM: at91/tc: add device tree support to atmel_tclib
  ...
2012-03-27 16:47:35 -07:00
Linus Torvalds 34800598b2 ARM: driver specific updates
These are all specific to some driver. They are typically the platform
 side of a change in the drivers directory, such as adding a new driver
 or extending the interface to the platform. In cases where there is no
 maintainer for the driver, or the maintainer prefers to have the
 platform changes in the same branch as the driver changes, the patches
 to the drivers are included as well.
 
 A much smaller set of driver updates that depend on other branches
 getting merged first will be sent later.
 
 The new export of tegra_chip_uid conflicts with other changes in fuse.c.
 In rtc-sa1100.c, the global removal of IRQF_DISABLED conflicts with
 the cleanup of the interrupt handling of that driver.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUAT24/Y2CrR//JCVInAQLUdw//V4pKPuKempSe1kuD2MJfqldHwEVOlAUt
 of1IhLPAp8tpCscPDQ0yTy3ixquINg4jVnaDLL+E0quVbhLu6hlS2TYNKDEaVAAc
 cPUtVEUdja7Cfu4+bXX2vcWM/UyI6Ax7bsUUcwu4wFnEsjA6qOSu/jYY4jXDguHq
 ODGQSaSz0XQkfVBsWOlO8W/ejb0T3y+Ro3M/Vz5qJsMnZBR8R/i9aUYDFGiZ1GTn
 3APHB7ALz6SS5/9SJS65PH16poBexcea5gyb3gnR1yt30kRmMTOAWrLC+JdyqFaO
 7LHXW514+D1QbWV2gwNCWhQSLbgp9PWq/FXJtq4StW7tgNbDbj1d1Dc1GX+fvk2M
 bBih1yWoIVx6CZWFBQ7gsbqVHUZ/sW2fo76yb8K5dVPXx0fL5lEkv5Xwk3gxbqt5
 lPE8+z+jiL5D+8RK1DZQu1PfxzaMwDZkJkVoGLCcdyM7FvnX3LIYf2bqbcp+zrQL
 lz9aht9C1k12R7feOX8emlluNd3eaKv/6jLrOasUP5wrJDam5hesSD5mLeTlAdxZ
 U8XJe4L24dFv15/yrMCzcyes5EmB3aS3nfb9TsSfq22IOKo2PCQLCnL6Z/rfM+1p
 mGu7BqdBnx3/8NkHdUrttMWjuPNh77MfPM6RO/E+TaBLHtwvKoLWJAHAYQNmt2xH
 IbGcyorBD5s=
 =pQ3X
 -----END PGP SIGNATURE-----

Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: driver specific updates" from Arnd Bergmann:
 "These are all specific to some driver.  They are typically the
  platform side of a change in the drivers directory, such as adding a
  new driver or extending the interface to the platform.  In cases where
  there is no maintainer for the driver, or the maintainer prefers to
  have the platform changes in the same branch as the driver changes,
  the patches to the drivers are included as well.

  A much smaller set of driver updates that depend on other branches
  getting merged first will be sent later.

  The new export of tegra_chip_uid conflicts with other changes in
  fuse.c.  In rtc-sa1100.c, the global removal of IRQF_DISABLED
  conflicts with the cleanup of the interrupt handling of that driver.

  Signed-off-by: Arnd Bergmann <arnd@arndb.de>"

Fixed up aforementioned trivial conflicts.

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits)
  ARM: SAMSUNG: change the name from s3c-sdhci to exynos4-sdhci
  mmc: sdhci-s3c: add platform data for the second capability
  ARM: SAMSUNG: support the second capability for samsung-soc
  ARM: EXYNOS: add support DMA for EXYNOS4X12 SoC
  ARM: EXYNOS: Add apb_pclk clkdev entry for mdma1
  ARM: EXYNOS: Enable MDMA driver
  regulator: Remove bq24022 regulator driver
  rtc: sa1100: add OF support
  pxa: magician/hx4700: Convert to gpio-regulator from bq24022
  ARM: OMAP3+: SmartReflex: fix error handling
  ARM: OMAP3+: SmartReflex: fix the use of debugfs_create_* API
  ARM: OMAP3+: SmartReflex: micro-optimization for sanity check
  ARM: OMAP3+: SmartReflex: misc cleanups
  ARM: OMAP3+: SmartReflex: move late_initcall() closer to its argument
  ARM: OMAP3+: SmartReflex: add missing platform_set_drvdata()
  ARM: OMAP3+: hwmod: add SmartReflex IRQs
  ARM: OMAP3+: SmartReflex: clear ERRCONFIG_VPBOUNDINTST only on a need
  ARM: OMAP3+: SmartReflex: Fix status masking in ERRCONFIG register
  ARM: OMAP3+: SmartReflex: Add a shutdown hook
  ARM: OMAP3+: SmartReflex Class3: disable errorgen before disable VP
  ...

Conflicts:
	arch/arm/mach-tegra/Makefile
	arch/arm/mach-tegra/fuse.c
	drivers/rtc/rtc-sa1100.c
2012-03-27 16:41:24 -07:00
Jean Delvare 41101a3302 i2c-algo-bit: Don't resched on clock stretching
Clock stretching is not supposed to last long, so asking to be
rescheduled while waiting for the clock line to be released by a slave
makes little sense. Odds are that the clock line will long have been
released when we run again, so we will have lost time and may even
get an SMBus timeout because of this.

So just busy-wait in that case. This also participates in the effort
to make i2c-algo-bit usable in contexts that can't sleep.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
2012-03-26 21:47:19 +02:00
Jean Delvare 5694f8a888 i2c: Update the FSF address
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-26 21:47:19 +02:00
Axel Lin de05497aab i2c: Convert drivers/i2c/muxes/* to use module_i2c_driver()
This patch converts the drivers in drivers/i2c/muxes/* to use the
module_i2c_driver() macro which makes the code smaller and a bit simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Michael Lawnick <ml.lawnick@gmx.de>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-26 21:47:19 +02:00
Jean Delvare 84c1af4c21 i2c-i801: Use usleep_range to wait for command completion
Use usleep_range instead of msleep when waiting for command
completion. Most SMBus commands complete in less than 2 jiffies so
this brings a pleasant performance boost.

Strongly inspired from a similar change by Olivier Sobrie to the
i2c-isch driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Olivier Sobrie <olivier@sobrie.be>
2012-03-26 21:47:19 +02:00
Seth Heasley 062737fb6d i2c-i801: Add device IDs for Intel Lynx Point
Add the SMBus controller device IDs for the Intel Lynx Point PCH.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-26 21:47:19 +02:00
Olivier Sobrie b3240e68c0 i2c-isch: Decrease delay in command completion check loop
Generally it is not needed to wait for 1 msec, the SMBus get often ready
in less than 200 usecs.

msleep(1) can wait up to 20 msecs... It has a significant impact when
there is a burst of transactions on the bus.

Signed-off-by: Olivier Sobrie <olivier@sobrie.be>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-26 21:47:18 +02:00
Mark Brown c54c35572a i2c-gpio: Use linux/gpio.h rather than asm/gpio.h
Direct inclusion of asm/gpio.h has been deprecated for a while now due
to the cross platform gpiolib.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-26 21:47:18 +02:00
Linus Torvalds fc2bb8d1cd Merge branch 'i2c-embedded/for-3.4' of git://git.pengutronix.de/git/wsa/linux
Pull i2c embedded updates from Wolfram Sang:
 "Nothing special from i2c-embedded for this merge window.  Two new
  drivers, minor feature additions, bugfixes, cleanups.

  All patches have been in linux-next for some time, too."

* 'i2c-embedded/for-3.4' of git://git.pengutronix.de/git/wsa/linux:
  i2c-eg20t: Remove write-only variables
  i2c-eg20t: Rework pch_i2c_wait_for_bus_idle to reduce wait time
  i2c-s3c2410: Add stub runtime power management
  i2c-s3c2410: Convert to devm_kzalloc()
  i2c: add CSR SiRFprimaII on-chip I2C controllers driver
  i2c: tegra: Remove unnecessary write to INT_STATUS
  i2c: imx: fix imx driver to work though signal is pending
  i2c: designware: dw_i2c_init_driver as subsys initcall
  misc: at24: describe platform_data with kernel_doc
  i2c: Move I2C_EG20T option to the right place.
  i2c: Support for Netlogic XLR/XLS I2C controller.
  i2c: mpc: Add support for SMBUS_READ_BLOCK_DATA
  i2c: versatile: Add Device Tree support
2012-03-23 14:12:04 -07:00
Linus Torvalds be53bfdb80 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm main changes from Dave Airlie:
 "This is the main drm pull request, I'm probably going to send two more
  smaller ones, will explain below.

  This contains a patch that is also in the fbdev tree, but it should be
  the same patch, it added an API for hot unplugging framebuffer
  devices, and I need that API for a new driver.

  It also contains some changes to the i2c tree which Jean has acked,
  and one change to moorestown platform stuff in x86.

  Highlights:
   - new drivers: UDL driver for USB displaylink devices, kms only,
     should support correct hotplug operations.
   - core: i2c speedups + better hotplug support, EDID overriding via
     firmware interface - allows user to load a firmware for a broken
     monitor/kvm from userspace, it even has documentation for it.
   - exynos: new HDMI audio + hdmi 1.4 + virtual output driver
   - gma500: code cleanup
   - radeon: cleanups, CS optimisations, streamout support and pageflip
     fix
   - nouveau: NVD9 displayport support + more reclocking work
   - i915: re-enabling GMBUS, finish gpu patch (might help hibernation
     who knows), missed irq fixes, stencil tiling fixes, interlaced
     support, aliasesd PPGTT support for SNB/IVB, swizzling for SNB/IVB,
     semaphore fixes

  As well as the usual bunch of cleanups and fixes all over the place.

  I've got two things I'd like to merge a bit later:

   a) AMD support for all their new radeonhd 7000 series GPU and APUs.
      AMD dropped this a bit late due to insane internal review
      processes, (please AMD just follow Intel and let open source guys
      ship stuff early) however I don't want to penalise people who own
      this hardware (since its been on sale for 3-4 months and GPU hw
      doesn't exactly have a lifetime in years) and consign them to
      using closed drivers for longer than necessary.  The changes are
      well contained and just plug into the driver new gpu functionality
      so they should be fairly regression proof.  I just want to give
      them a bit of a run on the hw AMD kindly sent me.

   b) drm prime/dma-buf interface code.  This is just infrastructure
      code to expose the dma-buf stuff to drm drivers and to userspace.
      I'm not planning on pushing any driver support in this cycle
      (except maybe exynos), but I'd like to get the infrastructure code
      in so for the next cycle I can start getting the driver support
      into the individual drivers.  We have started driver support for
      i915, nouveau and udl along with I think exynos and omap in
      staging.  However this code relies on the dma-buf tree being
      pulled into your tree first since it needs the latest interfaces
      from that tree.  I'll push to get that tree sent asap.

  (oh and any warnings you see in i915 are gcc's fault from what anyone
  can see)."

Fix up trivial conflicts in arch/x86/platform/mrst/mrst.c due to the new
msic_thermal_platform_data() thermal function being added next to the
tc35876x_platform_data() i2c device function..

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (326 commits)
  drm/i915: use DDC_ADDR instead of hard-coding it
  drm/radeon: use DDC_ADDR instead of hard-coding it
  drm: remove unneeded redefinition of DDC_ADDR
  drm/exynos: added virtual display driver.
  drm: allow loading an EDID as firmware to override broken monitor
  drm/exynos: enable hdmi audio feature
  drm/exynos: add default pixel format for plane
  drm/exynos: cleanup exynos_hdmi.h
  drm/exynos: add is_local member in exynos_drm_subdrv struct
  drm/exynos: add subdrv open/close functions
  drm/exynos: remove module of exynos drm subdrv
  drm/exynos: release pending pageflip events when closed
  drm/exynos: added new funtion to get/put dma address.
  drm/exynos: update gem and buffer framework.
  drm/exynos: added mode_fixup feature and code clean.
  drm/exynos: add HDMI version 1.4 support
  drm/exynos: remove exynos_mixer.h
  gma500: Fix mmap frambuffer
  drm/radeon: Drop radeon_gem_object_(un)pin.
  drm/radeon: Restrict offset for legacy display engine.
  ...
2012-03-22 13:08:22 -07:00
Dave Airlie de49442f59 Merge tag 'drm-intel-next-2012-03-01' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
* tag 'drm-intel-next-2012-03-01' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: Only clear the GPU domains upon a successful finish
  drm/i915: reenable gmbus on gen3+ again
  drm/i915: i2c: unconditionally set up gpio fallback
  drm/i915: merge gmbus and gpio i2c adpater into one
  drm/i915: merge struct intel_gpio into struct intel_gmbus
  i2c: export bit-banging algo functions
  drm/nouveau: do a better job at hiding the NIH i2c bit-banging algo
  drm/i915: add dev_priv to intel_gmbus
  drm/i915: Fix single msg gmbus_xfers writes
  drm/i915: error_buffer->ring should be signed
  drm/i915: Silence the error message from i915_wait_request()
  drm/i915: use the new hdmi_force_audio enum more
  drm/i915: No need to search again after retiring requests
  drm/i915: Only bump refcnt on objects scheduled for eviction
  drm/i915/bios: Downgrade the "signature missing" DRM_ERROR to debug
  drm/i915: Ignore LVDS on hp t5745 and hp st5747 thin client
  drm/i915: Fixes distorted external screen image on HP 2730p
2012-03-20 08:51:37 +00:00
Arnd Bergmann 2a9f23d82a Merge branch 'at91-3.4-cleanup2-DT2' of git://github.com/at91linux/linux-at91 into next/dt
* 'at91-3.4-cleanup2-DT2' of git://github.com/at91linux/linux-at91: (23 commits)
  ARM: at91: dt: enable usb ehci for sam9g45 and sam9x5
  ARM: at91: usb ehci add dt support
  ARM: at91: dt: enable usb ohci for sam9g20, sam9g45 amd sam9x5
  ARM: at91: usb ohci add dt support
  ARM: at91: add Shutdown Controller (SHDWC) DT support
  ARM: at91: add ram controller DT support
  ARM: at91: add RSTC (Reset Controller) dt support
  ARM: at91: always enable sam9 restart
  ARM: at91: add pmc DT support
  ARM: at91/dt: add specific DT soc init
  ARM: at91/dt: add Calao DAB-MMX daugther board support for USB-A9G20
  ARM: at91: sam9x5 add i2c DT support
  ARM: at91: sam9g45 add i2c DT support
  ARM: at91: usb_a9g20 add DT i2c support
  ARM: at91: sam9g20 add i2c DT support
  i2c/gpio: add DT support
  ARM: at91: sam9x5 add nand support
  atmel/nand: add DT support
  of/mtd/nand: add generic bindings and helpers
  of: introduce helper to manage boolean
  ...
2012-03-16 13:05:46 +00:00
Ville Syrjala 8ee161ce5e i2c-algo-bit: Fix spurious SCL timeouts under heavy load
When the system is under heavy load, there can be a significant delay
between the getscl() and time_after() calls inside sclhi(). That delay
may cause the time_after() check to trigger after SCL has gone high,
causing sclhi() to return -ETIMEDOUT.

To fix the problem, double check that SCL is still low after the
timeout has been reached, before deciding to return -ETIMEDOUT.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-15 18:11:05 +01:00
Wolfram Sang 834aa6f30c i2c-core: Comment says "transmitted" but means "received"
Fix that. Also convert this and the related comment to proper commenting
style.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-15 18:11:05 +01:00
Jean-Christophe PLAGNIOL-VILLARD 8ffaa0f40d i2c/gpio: add DT support
To achieve DT support, we need to populate a custom platform_data in a
private struct from DT information. To simplify code, the adapter and
algorithm are also put into the private struct.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15 23:29:22 +08:00
Olof Johansson 990b07d952 Merge branch 'regulator' of git://github.com/hzhuang1/linux into next/drivers
* 'regulator' of git://github.com/hzhuang1/linux: (2 commits)
  regulator: Remove bq24022 regulator driver
  pxa: magician/hx4700: Convert to gpio-regulator from bq24022

  (plus update to v3.3-rc6)
2012-03-08 09:33:44 -08:00
Alexander Stein bbceeee82e i2c-eg20t: Remove write-only variables
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-03-07 19:26:22 +01:00
Alexander Stein 0836c80901 i2c-eg20t: Rework pch_i2c_wait_for_bus_idle to reduce wait time
If you insert several i2c transfers, the driver might start the next one
while the STOP bit of the previous transfer is still on the bus, marking
the bus as busy.
pch_i2c_wait_for_bus_idle does an msleep(20) delaying the next transfer
by >=20ms. Reduce wait time by actively waiting 5 us once, then using
usleep_range.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Acked-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-03-07 19:07:04 +01:00
Mark Brown c62c3ca55e i2c-s3c2410: Add stub runtime power management
Add stub runtime_pm calls which go through the flow of enabling and
disabling but don't actually do anything with the device itself as
there's nothing useful we can do. This provides the core PM framework
with information about when the device is idle, enabling chip wide
power savings.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-03-07 19:06:59 +01:00
Mark Brown 4ea1557ff7 i2c-s3c2410: Convert to devm_kzalloc()
Saves remembering to call kfree(). There's some kfree()s used by the
resource still, these will be removed in 3.3 using the newly added
devm_request_and_ioremap().

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-03-07 19:06:53 +01:00
Zhiwu Song 979b907fa5 i2c: add CSR SiRFprimaII on-chip I2C controllers driver
SiRFprimaII is the latest generation application processor from CSR’s
multi-function SoC product family.
The SoC support codes are in arch/arm/mach-prima2 from Linux mainline
3.0.
There are two I2C controllers on primaII, features include:
* Two I2C controller modules are on chip
* RISC I/O bus read write register
* Up to 16 bytes data buffer for issuing commands and writing data
  at the same time
* Up to 16 commands, and receiving read data 16 bytes at a time
* Error INT report (ACK check)
* No-ACK bus protocols (SCCB bus protocols)

Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com>
Signed-off-by: Xiangzhen Ye <Xiangzhen.Ye@csr.com>
Signed-off-by: Yuping Luo <Yuping.Luo@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-03-07 19:05:04 +01:00
Alok Chauhan bf6c2de11c i2c: tegra: Remove unnecessary write to INT_STATUS
The write is not necessary and may cause the I2C controller to misbehave.
With this fix, I2C on Tegra30 works (at least, running i2cdump repeatedly
on the WM8903 on Cardhu's I2C5/DVC bus).

Signed-off-by: Alok Chauhan <alokc@nvidia.com>
[swarren: Reworded commit description]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-03-07 19:04:06 +01:00
Haojian Zhuang 63fe122bce i2c: pxa: add OF support
Append these properties in below.
mrvl,i2c-polling
mrvl,i2c-fast-mode

Still keep slave, slave_addr and class in platform data.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-03-07 09:32:03 +08:00
Daniel Vetter b0209b3995 i2c: export bit-banging algo functions
i915 has a hw i2c controller (gmbus) but for a bunch of stupid reasons
we need to be able to fall back to the bit-banging algo on gpio pins.

The current code sets up a 2nd i2c controller for the same i2c bus using
the bit-banging algo. This has a bunch of issues, the major one being
that userspace can directly access this fallback i2c adaptor behind
the drivers back.

But we need to frob a few registers before and after using fallback
gpio bit-banging, so this horribly fails.

The new plan is to only set up one i2c adaptor and transparently fall
back to bit-banging by directly calling the xfer function of the bit-
banging algo in the i2c core.

To make that possible, export the 2 i2c algo functions.

v2: As suggested by Jean Delvare, simply export the i2c_bit_algo
vtable instead of the individual functions.

Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-02-29 20:47:42 +01:00
Oskar Schirmer bb79a0798d i2c: imx: fix imx driver to work though signal is pending
Interrupt a test application for I2C based mc13xxx driven
touch panel, SIGINT, causes open event file descriptor to be
closed, which in turn causes I2C activity to mask PMIC local
interrupts. This eventually ends up in i2c_imx_bus_busy to
wait for some busy flag to toggle, but while waiting it would
find a signal pending and break. The final symptom is the
device is not closed down cleanly and thus not reopenable.

Do without check for pending signal.

Signed-off-by: Oskar Schirmer <oskar@scara.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-02-29 20:21:24 +01:00
Pratyush Anand 104522806a i2c: designware: dw_i2c_init_driver as subsys initcall
There are few drivers which are available on i2c bus but have been initialized
with subsys_initcall. Also as I2C is a bus driver, it should be available as
early as possible.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>

[wsa: Slightly updated the commit message]

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-02-29 20:21:03 +01:00
Wolfram Sang 844990daa2 i2c: mxs: only flag completion when queue is completely done
The hardware generates an interrupt for every completed command in the
queue while the code assumed that it will only generate one interrupt
when the queue is empty. So, explicitly check if the queue is really
empty. This patch fixed problems which occurred due to high traffic on
the bus. While we are here, move the completion-initialization after the
parameter error checking.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Lothar Waßmann <LW@KARO-electronics.de>
Cc: stable@kernel.org
2012-02-24 22:28:27 +01:00
Jayachandran C 3e1b76be0b i2c: Move I2C_EG20T option to the right place.
Move Kconfig option for I2C_EG20T to the correct position and keep
the options sorted.

Also, use tabs in Makefile and move the I2C_EG20T entry to its
position.

Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-02-24 22:25:58 +01:00
Ganesan Ramalingam 401c3434c4 i2c: Support for Netlogic XLR/XLS I2C controller.
Add support for the intergrated I2C controller on Netlogic
XLR/XLS MIPS SoC.

The changes are to add a new file i2c/buses/i2c-xlr.c, containing the
i2c bus implementation, and to update i2c/buses/{Kconfig,Makefile} to
add the CONFIG_I2C_XLR option.

Signed-off-by: Ganesan Ramalingam <ganesanr@netlogicmicro.com>
Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-02-24 22:25:57 +01:00
Tang Yuantian 3f0e1e4bb6 i2c: mpc: Add support for SMBUS_READ_BLOCK_DATA
Add support for SMBUS_READ_BLOCK_DATA to the i2c-mpc bus driver.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-02-24 22:25:30 +01:00
Pawel Moll 237ab4062d i2c: versatile: Add Device Tree support
This patch adds Device Tree binding ("arm,versatile-i2c") and
basic support (bus population) to versatile-i2c driver.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>

[wsa: constified match-table]

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-02-24 22:25:07 +01:00
Arnd Bergmann 2daa79ec21 Merge branch 'lpc32xx/drivers' into next/drivers
* lpc32xx/drivers: (566 commits)
  ARM: LPC32xx: ADC support for mach-lpc32xx

Includes an update to Linux 3.3-rc4

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-22 14:20:18 +00:00
Arnd Bergmann 0dcd627896 Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra into fixes
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra:
  ARM: tegra: paz00: fix wrong UART port on mini-pcie plug
  ARM: tegra: paz00: fix wrong SD1 power gpio
  i2c: tegra: Add devexit_p() for remove
  ARM: tegra: dma: fix buildbreak for !CONFIG_TEGRA_SYSTEM_DMA
2012-02-13 05:40:38 +00:00
Shubhrajyoti Datta 218d06d794 i2c: tegra: Add devexit_p() for remove
It was originally missed in the __devinit/__devexit annotations.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-02-06 18:32:45 -08:00
Richard Zhao 83914337d1 i2c: imx: add clk_prepare/clk_unprepare
It's for migrating to generic clk framework API.

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-01 14:29:31 +01:00
Cousson, Benoit 6c5aa407d5 i2c: OMAP: Fix OMAP1 build error
CONFIG_OF is not defined for OMAP1 yet and thus the omap1_defconfig build
generate an error for 3.3-rc1.

drivers/i2c/busses/i2c-omap.c: In function 'omap_i2c_probe':
drivers/i2c/busses/i2c-omap.c:1021:26: error: 'omap_i2c_of_match' undeclared (first use in this function)
drivers/i2c/busses/i2c-omap.c:1021:26: note: each undeclared identifier is reported only once for each function it appears in

Wrap omap_i2c_of_match with of_match_ptr() to prevent compilation error in case of OMAP1 build.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-01-20 08:24:22 -08:00
Ben Dooks 6f36a806e5 Merge branches 'for-33/i2c/eg20t' and 'for-33/i2c/omap' into for-linus/i2c-33 2012-01-17 23:30:41 +00:00
Tomoya MORINAGA 8956dc102c i2c-eg20t: Change-company-name-OKI-SEMICONDUCTOR to LAPIS Semiconductor
On October 1 in 2011,
OKI SEMICONDUCTOR Co., Ltd. changed the company name in to LAPIS Semiconductor Co., Ltd.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2012-01-17 23:29:56 +00:00