Commit Graph

133 Commits

Author SHA1 Message Date
Nathan Fontenot f7e3334a6b powerpc: Fix memory hotplug with sparse vmemmap
Previous commit 46723bfa540... introduced a new config option
HAVE_BOOTMEM_INFO_NODE that ended up breaking memory hot-remove for ppc
when sparse vmemmap is not defined.

This patch defines HAVE_BOOTMEM_INFO_NODE for ppc and adds the call to
register_page_bootmem_info_node. Without this we get a BUG_ON for memory
hot remove in put_page_bootmem().

This also adds a stub for register_page_bootmem_memmap to allow ppc to build
with sparse vmemmap defined. Leaving this as a stub is fine since the same
vmemmap addresses are also handled in vmemmap_populate and as such are
properly mapped.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.9+]
2013-10-03 17:21:38 +10:00
Chen Gang de32a8177f mm/Kconfig: add MMU dependency for MIGRATION.
MIGRATION must depend on MMU, or allmodconfig for the nommu sh
architecture fails to build:

    CC      mm/migrate.o
  mm/migrate.c: In function 'remove_migration_pte':
  mm/migrate.c:134:3: error: implicit declaration of function 'pmd_trans_huge' [-Werror=implicit-function-declaration]
     if (pmd_trans_huge(*pmd))
     ^
  mm/migrate.c:149:2: error: implicit declaration of function 'is_swap_pte' [-Werror=implicit-function-declaration]
    if (!is_swap_pte(pte))
    ^
  ...

Also let CMA depend on MMU, or when NOMMU, if we select CMA, it will
select MIGRATION by force.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 15:38:03 -07:00
Alexander Graf bf550fc93d Merge remote-tracking branch 'origin/next' into kvm-ppc-next
Conflicts:
	mm/Kconfig

CMA DMA split and ZSWAP introduction were conflicting, fix up manually.
2013-08-29 00:41:59 +02:00
Seth Jennings 2b2811178e zswap: add to mm/
zswap is a thin backend for frontswap that takes pages that are in the
process of being swapped out and attempts to compress them and store
them in a RAM-based memory pool.  This can result in a significant I/O
reduction on the swap device and, in the case where decompressing from
RAM is faster than reading from the swap device, can also improve
workload performance.

It also has support for evicting swap pages that are currently
compressed in zswap to the swap device on an LRU(ish) basis.  This
functionality makes zswap a true cache in that, once the cache is full,
the oldest pages can be moved out of zswap to the swap device so newer
pages can be compressed and stored in zswap.

This patch adds the zswap driver to mm/

Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Cc: Jenifer Hopper <jhopper@us.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Joe Perches <joe@perches.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-10 18:11:34 -07:00
Seth Jennings 4e2e2770b1 zbud: add to mm/
zbud is an special purpose allocator for storing compressed pages.  It
is designed to store up to two compressed pages per physical page.
While this design limits storage density, it has simple and
deterministic reclaim properties that make it preferable to a higher
density approach when reclaim will be used.

zbud works by storing compressed pages, or "zpages", together in pairs
in a single memory page called a "zbud page".  The first buddy is "left
justifed" at the beginning of the zbud page, and the last buddy is
"right justified" at the end of the zbud page.  The benefit is that if
either buddy is freed, the freed buddy space, coalesced with whatever
slack space that existed between the buddies, results in the largest
possible free region within the zbud page.

zbud also provides an attractive lower bound on density.  The ratio of
zpages to zbud pages can not be less than 1.  This ensures that zbud can
never "do harm" by using more pages to store zpages than the
uncompressed zpages would have used on their own.

This implementation is a rewrite of the zbud allocator internally used
by zcache in the driver/staging tree.  The rewrite was necessary to
remove some of the zcache specific elements that were ingrained
throughout and provide a generic allocation interface that can later be
used by zsmalloc and others.

This patch adds zbud to mm/ for later use by zswap.

Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Cc: Jenifer Hopper <jhopper@us.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Joe Perches <joe@perches.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-10 18:11:34 -07:00
Alexander Graf 20f7462aac Merge remote-tracking branch 'cmadma/for-v3.12-cma-dma' into kvm-ppc-next
Add prerequisite patch for CMA RMA allocation patches
2013-07-08 16:16:56 +02:00
Pavel Emelyanov 0f8975ec4d mm: soft-dirty bits for user memory changes tracking
The soft-dirty is a bit on a PTE which helps to track which pages a task
writes to.  In order to do this tracking one should

  1. Clear soft-dirty bits from PTEs ("echo 4 > /proc/PID/clear_refs)
  2. Wait some time.
  3. Read soft-dirty bits (55'th in /proc/PID/pagemap2 entries)

To do this tracking, the writable bit is cleared from PTEs when the
soft-dirty bit is.  Thus, after this, when the task tries to modify a
page at some virtual address the #PF occurs and the kernel sets the
soft-dirty bit on the respective PTE.

Note, that although all the task's address space is marked as r/o after
the soft-dirty bits clear, the #PF-s that occur after that are processed
fast.  This is so, since the pages are still mapped to physical memory,
and thus all the kernel does is finds this fact out and puts back
writable, dirty and soft-dirty bits on the PTE.

Another thing to note, is that when mremap moves PTEs they are marked
with soft-dirty as well, since from the user perspective mremap modifies
the virtual memory at mremap's new address.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:26 -07:00
Aneesh Kumar K.V f825c736e7 mm/cma: Move dma contiguous changes into a seperate config
We want to use CMA for allocating hash page table and real mode area for
PPC64. Hence move DMA contiguous related changes into a seperate config
so that ppc64 can enable CMA without requiring DMA contiguous.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[removed defconfig changes]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2013-07-02 10:08:22 +02:00
Stephen Rothwell 40b313608a Finally eradicate CONFIG_HOTPLUG
Ever since commit 45f035ab9b ("CONFIG_HOTPLUG should be always on"),
it has been basically impossible to build a kernel with CONFIG_HOTPLUG
turned off.  Remove all the remaining references to it.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03 14:20:18 -07:00
Vinayak Menon 9ca24e2e19 mmKconfig: add an option to disable bounce
There are times when HIGHMEM is enabled, but we don't prefer
CONFIG_BOUNCE to be enabled.  CONFIG_BOUNCE can reduce the block device
throughput, and this is not ideal for machines where we don't gain much
by enabling it.  So provide an option to deselect CONFIG_BOUNCE.  The
observation was made while measuring eMMC throughput using iozone on an
ARM device with 1GB RAM.

Signed-off-by: Vinayak Menon <vinayakm.list@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 15:54:40 -07:00
Stephen Rothwell 4febd95a8a Select VIRT_TO_BUS directly where needed
In commit 887cbce0ad ("arch Kconfig: centralise ARCH_NO_VIRT_TO_BUS")
I introduced the config sybmol HAVE_VIRT_TO_BUS and selected that where
needed.  I am not sure what I was thinking.  Instead, just directly
select VIRT_TO_BUS where it is needed.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-12 11:16:40 -07:00
Stephen Rothwell 887cbce0ad arch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUS
Change it to CONFIG_HAVE_VIRT_TO_BUS and set it in all architecures
that already provide virt_to_bus().

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: H Hartley Sweeten <hartleys@visionengravers.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:23 -08:00
Yasuaki Ishimatsu 46723bfa54 memory-hotplug: implement register_page_bootmem_info_section of sparse-vmemmap
For removing memmap region of sparse-vmemmap which is allocated bootmem,
memmap region of sparse-vmemmap needs to be registered by
get_page_bootmem().  So the patch searches pages of virtual mapping and
registers the pages by get_page_bootmem().

NOTE: register_page_bootmem_memmap() is not implemented for ia64,
      ppc, s390, and sparc.  So introduce CONFIG_HAVE_BOOTMEM_INFO_NODE
      and revert register_page_bootmem_info_node() when platform doesn't
      support it.

      It's implemented by adding a new Kconfig option named
      CONFIG_HAVE_BOOTMEM_INFO_NODE, which will be automatically selected
      by memory-hotplug feature fully supported archs(currently only on
      x86_64).

      Since we have 2 config options called MEMORY_HOTPLUG and
      MEMORY_HOTREMOVE used for memory hot-add and hot-remove separately,
      and codes in function register_page_bootmem_info_node() are only
      used for collecting infomation for hot-remove, so reside it under
      MEMORY_HOTREMOVE.

      Besides page_isolation.c selected by MEMORY_ISOLATION under
      MEMORY_HOTPLUG is also such case, move it too.

[mhocko@suse.cz: put register_page_bootmem_memmap inside CONFIG_MEMORY_HOTPLUG_SPARSE]
[linfeng@cn.fujitsu.com: introduce CONFIG_HAVE_BOOTMEM_INFO_NODE and revert register_page_bootmem_info_node()]
[mhocko@suse.cz: remove the arch specific functions without any implementation]
[linfeng@cn.fujitsu.com: mm/Kconfig: move auto selects from MEMORY_HOTPLUG to MEMORY_HOTREMOVE as needed]
[rientjes@google.com: fix defined but not used warning]
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: Wu Jianguo <wujianguo@huawei.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Lin Feng <linfeng@cn.fujitsu.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 17:50:12 -08:00
Linus Torvalds 7c2db36e73 Merge branch 'akpm' (incoming from Andrew)
Merge misc patches from Andrew Morton:

 - Florian has vanished so I appear to have become fbdev maintainer
   again :(

 - Joel and Mark are distracted to welcome to the new OCFS2 maintainer

 - The backlight queue

 - Small core kernel changes

 - lib/ updates

 - The rtc queue

 - Various random bits

* akpm: (164 commits)
  rtc: rtc-davinci: use devm_*() functions
  rtc: rtc-max8997: use devm_request_threaded_irq()
  rtc: rtc-max8907: use devm_request_threaded_irq()
  rtc: rtc-da9052: use devm_request_threaded_irq()
  rtc: rtc-wm831x: use devm_request_threaded_irq()
  rtc: rtc-tps80031: use devm_request_threaded_irq()
  rtc: rtc-lp8788: use devm_request_threaded_irq()
  rtc: rtc-coh901331: use devm_clk_get()
  rtc: rtc-vt8500: use devm_*() functions
  rtc: rtc-tps6586x: use devm_request_threaded_irq()
  rtc: rtc-imxdi: use devm_clk_get()
  rtc: rtc-cmos: use dev_warn()/dev_dbg() instead of printk()/pr_debug()
  rtc: rtc-pcf8583: use dev_warn() instead of printk()
  rtc: rtc-sun4v: use pr_warn() instead of printk()
  rtc: rtc-vr41xx: use dev_info() instead of printk()
  rtc: rtc-rs5c313: use pr_err() instead of printk()
  rtc: rtc-at91rm9200: use dev_dbg()/dev_err() instead of printk()/pr_debug()
  rtc: rtc-rs5c372: use dev_dbg()/dev_warn() instead of printk()/pr_debug()
  rtc: rtc-ds2404: use dev_err() instead of printk()
  rtc: rtc-efi: use dev_err()/dev_warn()/pr_err() instead of printk()
  ...
2013-02-21 17:38:49 -08:00
Darrick J. Wong ffecfd1a72 block: optionally snapshot page contents to provide stable pages during write
This provides a band-aid to provide stable page writes on jbd without
needing to backport the fixed locking and page writeback bit handling
schemes of jbd2.  The band-aid works by using bounce buffers to snapshot
page contents instead of waiting.

For those wondering about the ext3 bandage -- fixing the jbd locking
(which was done as part of ext4dev years ago) is a lot of surgery, and
setting PG_writeback on data pages when we actually hold the page lock
dropped ext3 performance by nearly an order of magnitude.  If we're
going to migrate iscsi and raid to use stable page writes, the
complaints about high latency will likely return.  We might as well
centralize their page snapshotting thing to one place.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Tested-by: Andy Lutomirski <luto@amacapital.net>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 17:22:20 -08:00
Kees Cook a8826eeb71 mm: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

CC: Andrew Morton <akpm@linux-foundation.org>
CC: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
CC: Jan Beulich <JBeulich@novell.com>
CC: Mel Gorman <mel@csn.ul.ie>
CC: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17 12:11:27 -08:00
Tang Chen c2974058a9 memory-hotplug: document and enable CONFIG_MOVABLE_NODE
Add help info for CONFIG_MOVABLE_NODE and permit its selection.

This option allows the user to online all memory of a node as movable
memory.  So that the whole node can be hotplugged.  Users who don't use
the hotplug feature are also fine with this option on since they won't
online memory as movable.

Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
[akpm@linux-foundation.org: tweak help text]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18 15:02:12 -08:00
Linus Torvalds f6e858a00a Merge branch 'akpm' (Andrew's patch-bomb)
Merge misc VM changes from Andrew Morton:
 "The rest of most-of-MM.  The other MM bits await a slab merge.

  This patch includes the addition of a huge zero_page.  Not a
  performance boost but it an save large amounts of physical memory in
  some situations.

  Also a bunch of Fujitsu engineers are working on memory hotplug.
  Which, as it turns out, was badly broken.  About half of their patches
  are included here; the remainder are 3.8 material."

However, this merge disables CONFIG_MOVABLE_NODE, which was totally
broken.  We don't add new features with "default y", nor do we add
Kconfig questions that are incomprehensible to most people without any
help text.  Does the feature even make sense without compaction or
memory hotplug?

* akpm: (54 commits)
  mm/bootmem.c: remove unused wrapper function reserve_bootmem_generic()
  mm/memory.c: remove unused code from do_wp_page()
  asm-generic, mm: pgtable: consolidate zero page helpers
  mm/hugetlb.c: fix warning on freeing hwpoisoned hugepage
  hwpoison, hugetlbfs: fix RSS-counter warning
  hwpoison, hugetlbfs: fix "bad pmd" warning in unmapping hwpoisoned hugepage
  mm: protect against concurrent vma expansion
  memcg: do not check for mm in __mem_cgroup_count_vm_event
  tmpfs: support SEEK_DATA and SEEK_HOLE (reprise)
  mm: provide more accurate estimation of pages occupied by memmap
  fs/buffer.c: remove redundant initialization in alloc_page_buffers()
  fs/buffer.c: do not inline exported function
  writeback: fix a typo in comment
  mm: introduce new field "managed_pages" to struct zone
  mm, oom: remove statically defined arch functions of same name
  mm, oom: remove redundant sleep in pagefault oom handler
  mm, oom: cleanup pagefault oom handler
  memory_hotplug: allow online/offline memory to result movable node
  numa: add CONFIG_MOVABLE_NODE for movable-dedicated node
  mm, memcg: avoid unnecessary function call when memcg is disabled
  ...
2012-12-13 13:11:15 -08:00
Lai Jiangshan 20b2f52b73 numa: add CONFIG_MOVABLE_NODE for movable-dedicated node
We need a node which only contains movable memory.  This feature is very
important for node hotplug.  If a node has normal/highmem, the memory may
be used by the kernel and can't be offlined.  If the node only contains
movable memory, we can offline the memory and the node.

All are prepared, we can actually introduce N_MEMORY.
add CONFIG_MOVABLE_NODE make we can use it for movable-dedicated node

[akpm@linux-foundation.org: fix Kconfig text]
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Tested-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 17:38:34 -08:00
Rafael Aquini 18468d93e5 mm: introduce a common interface for balloon pages mobility
Memory fragmentation introduced by ballooning might reduce significantly
the number of 2MB contiguous memory blocks that can be used within a guest,
thus imposing performance penalties associated with the reduced number of
transparent huge pages that could be used by the guest workload.

This patch introduces a common interface to help a balloon driver on
making its page set movable to compaction, and thus allowing the system
to better leverage the compation efforts on memory defragmentation.

[akpm@linux-foundation.org: use PAGE_FLAGS_CHECK_AT_PREP, s/__balloon_page_flags/page_flags_cleared/, small cleanups]
[rientjes@google.com: allow balloon compaction for any system with memory compaction enabled, which is the defconfig]
Signed-off-by: Rafael Aquini <aquini@redhat.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-11 17:22:26 -08:00
Rik van Riel 05106e6a54 mm: enable CONFIG_COMPACTION by default
Now that lumpy reclaim has been removed, compaction is the only way left
to free up contiguous memory areas.  It is time to just enable
CONFIG_COMPACTION by default.

Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: Rafael Aquini <aquini@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:53 +09:00
Gerald Schaefer 15626062f4 thp, x86: introduce HAVE_ARCH_TRANSPARENT_HUGEPAGE
Cleanup patch in preparation for transparent hugepage support on s390.
Adding new architectures to the TRANSPARENT_HUGEPAGE config option can
make the "depends" line rather ugly, like "depends on (X86 || (S390 &&
64BIT)) && MMU".

This patch adds a HAVE_ARCH_TRANSPARENT_HUGEPAGE instead.  x86 already has
MMU "def_bool y", so the MMU check is superfluous there and
HAVE_ARCH_TRANSPARENT_HUGEPAGE can be selected in arch/x86/Kconfig.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:29 +09:00
Minchan Kim ee6f509c32 mm: factor out memory isolate functions
mm/page_alloc.c has some memory isolation functions but they are used only
when we enable CONFIG_{CMA|MEMORY_HOTPLUG|MEMORY_FAILURE}.  So let's make
it configurable by new CONFIG_MEMORY_ISOLATION so that it can reduce
binary size and we can check it simple by CONFIG_MEMORY_ISOLATION, not if
defined CONFIG_{CMA|MEMORY_HOTPLUG|MEMORY_FAILURE}.

Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:45 -07:00
Linus Torvalds a3fe778c78 Frontswap provides a "transcendent memory" interface for swap pages.
In some environments, dramatic performance savings may be obtained because
 swapped pages are saved in RAM (or a RAM-like device) instead of a swap disk.
 This tag provides the basic infrastructure along with some changes to the
 existing backends.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJPsorBAAoJEFjIrFwIi8fJcz8H/RBXCtFo0kiJmRked3nMAIDO
 /2zN/q/Qawsg9aeoGlP7G8hQi9PMipbhQj3ixHyCTMv0zMbH988GXbBce+gIcg6e
 TOQi7xXAuPEwLizmSpiTv84XzN5bMgu1oJXEqIXw0EIpuZAmp+9m/o3WBwEAtyxi
 B+hvjE7eZM8f75K3lxs6sOtmIcERj9zqmT933Y8+i9iiuRyGMey2SyKtvVLbYZ+j
 HroFMUi0so5TzxT/cpkRiHu0U75c651o+LV00zh7InMqbwyRsWlKTf53k8Q/q2WP
 I7dVmfItwN/TpOrYTfxglYFlbYuUP35ziFvZ2trd6hcs9RK8OuKw+OmBLReHTtc=
 =x9Vp
 -----END PGP SIGNATURE-----

Merge tag 'stable/frontswap.v16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/mm

Pull frontswap feature from Konrad Rzeszutek Wilk:
 "Frontswap provides a "transcendent memory" interface for swap pages.
  In some environments, dramatic performance savings may be obtained
  because swapped pages are saved in RAM (or a RAM-like device) instead
  of a swap disk.  This tag provides the basic infrastructure along with
  some changes to the existing backends."

Fix up trivial conflict in mm/Makefile due to removal of swap token code
changing a line next to the new frontswap entry.

This pull request came in before the merge window even opened, it got
delayed to after the merge window by me just wanting to make sure it had
actual users.  Apparently IBM is using this on their embedded side, and
Jan Beulich says that it's already made available for SLES and OpenSUSE
users.

Also acked by Rik van Riel, and Konrad points to other people liking it
too.  So in it goes.

By Dan Magenheimer (4) and Konrad Rzeszutek Wilk (2)
via Konrad Rzeszutek Wilk
* tag 'stable/frontswap.v16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/mm:
  frontswap: s/put_page/store/g s/get_page/load
  MAINTAINER: Add myself for the frontswap API
  mm: frontswap: config and doc files
  mm: frontswap: core frontswap functionality
  mm: frontswap: core swap subsystem hooks and headers
  mm: frontswap: add frontswap header file
2012-06-04 12:28:45 -07:00
Christopher Yeoh 5febcbe99d Cross Memory Attach: make it Kconfigurable
Add a Kconfig option to allow people who don't want cross memory attach to
not have it included in their build.

Signed-off-by: Chris Yeoh <yeohc@au1.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:20 -07:00
Michal Nazarewicz 47118af076 mm: mmzone: MIGRATE_CMA migration type added
The MIGRATE_CMA migration type has two main characteristics:
(i) only movable pages can be allocated from MIGRATE_CMA
pageblocks and (ii) page allocator will never change migration
type of MIGRATE_CMA pageblocks.

This guarantees (to some degree) that page in a MIGRATE_CMA page
block can always be migrated somewhere else (unless there's no
memory left in the system).

It is designed to be used for allocating big chunks (eg. 10MiB)
of physically contiguous memory.  Once driver requests
contiguous memory, pages from MIGRATE_CMA pageblocks may be
migrated away to create a contiguous block.

To minimise number of migrations, MIGRATE_CMA migration type
is the last type tried when page allocator falls back to other
migration types when requested.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Tested-by: Barry Song <Baohua.Song@csr.com>
2012-05-21 15:09:32 +02:00
Dan Magenheimer 27c6aec214 mm: frontswap: config and doc files
This patch 4of4 adds configuration and documentation files including a FAQ.

[v14: updated docs/FAQ to use zcache and RAMster as examples]
[v10: no change]
[v9: akpm@linux-foundation.org: sysfs->debugfs; no longer need Doc/ABI file]
[v8: rebase to 3.0-rc4]
[v7: rebase to 3.0-rc3]
[v6: rebase to 3.0-rc1]
[v5: change config default to n]
[v4: rebase to 2.6.39]
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Acked-by: Jan Beulich <JBeulich@novell.com>
Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Rik Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-05-15 11:34:03 -04:00
Tejun Heo d4bbf7e775 Merge branch 'master' into x86/memblock
Conflicts & resolutions:

* arch/x86/xen/setup.c

	dc91c728fd "xen: allow extra memory to be in multiple regions"
	24aa07882b "memblock, x86: Replace memblock_x86_reserve/free..."

	conflicted on xen_add_extra_mem() updates.  The resolution is
	trivial as the latter just want to replace
	memblock_x86_reserve_range() with memblock_reserve().

* drivers/pci/intel-iommu.c

	166e9278a3 "x86/ia64: intel-iommu: move to drivers/iommu/"
	5dfe8660a3 "bootmem: Replace work_with_active_regions() with..."

	conflicted as the former moved the file under drivers/iommu/.
	Resolved by applying the chnages from the latter on the moved
	file.

* mm/Kconfig

	6661672053 "memblock: add NO_BOOTMEM config symbol"
	c378ddd53f "memblock, x86: Make ARCH_DISCARD_MEMBLOCK a config option"

	conflicted trivially.  Both added config options.  Just
	letting both add their own options resolves the conflict.

* mm/memblock.c

	d1f0ece6cd "mm/memblock.c: small function definition fixes"
	ed7b56a799 "memblock: Remove memblock_memory_can_coalesce()"

	confliected.  The former updates function removed by the
	latter.  Resolution is trivial.

Signed-off-by: Tejun Heo <tj@kernel.org>
2011-11-28 09:46:22 -08:00
Sam Ravnborg 6661672053 memblock: add NO_BOOTMEM config symbol
With the NO_BOOTMEM symbol added architectures may now use the following
syntax to tell that they do not need bootmem:

	select NO_BOOTMEM

This is much more convinient than adding a new kconfig symbol which was
otherwise required.

Adding this symbol does not conflict with the architctures that already
define their own symbol.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:47 -07:00
Tejun Heo c378ddd53f memblock, x86: Make ARCH_DISCARD_MEMBLOCK a config option
From 6839454ae63f1eb21e515c10229ca95c22955fec Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Thu, 14 Jul 2011 11:22:17 +0200

Make ARCH_DISCARD_MEMBLOCK a config option so that it can be handled
together with other MEMBLOCK options.

Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20110714094603.GH3455@htj.dyndns.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-14 11:47:52 -07:00
Tejun Heo 7c0caeb866 memblock: Add optional region->nid
From 83103b92f3234ec830852bbc5c45911bd6cbdb20 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Thu, 14 Jul 2011 11:22:16 +0200

Add optional region->nid which can be enabled by arch using
CONFIG_HAVE_MEMBLOCK_NODE_MAP.  When enabled, memblock also carries
NUMA node information and replaces early_node_map[].

Newly added memblocks have MAX_NUMNODES as nid.  Arch can then call
memblock_set_node() to set node information.  memblock takes care of
merging and node affine allocations w.r.t. node information.

When MEMBLOCK_NODE_MAP is enabled, early_node_map[], related data
structures and functions to manipulate and iterate it are disabled.
memblock version of __next_mem_pfn_range() is provided such that
for_each_mem_pfn_range() behaves the same and its users don't have to
be updated.

-v2: Yinghai spotted section mismatch caused by missing
     __init_memblock in memblock_set_node().  Fixed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20110714094342.GF3455@htj.dyndns.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-14 11:47:43 -07:00
Michael Witten 140a1ef2f9 mm Kconfig typo: cleancacne -> cleancache
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-10 14:47:52 +02:00
Dan Magenheimer 077b1f83a6 mm: cleancache core ops functions and config
This third patch of eight in this cleancache series provides
the core code for cleancache that interfaces between the hooks in
VFS and individual filesystems and a cleancache backend.  It also
includes build and config patches.

Two new files are added: mm/cleancache.c and include/linux/cleancache.h.

Note that CONFIG_CLEANCACHE can default to on; in systems that do
not provide a cleancache backend, all hooks devolve to a simple
check of a global enable flag, so performance impact should
be negligible but can be reduced to zero impact if config'ed off.
However for this first commit, it defaults to off.

Details and a FAQ can be found in Documentation/vm/cleancache.txt

Credits: Cleancache_ops design derived from Jeremy Fitzhardinge
design for tmem

[v8: dan.magenheimer@oracle.com: fix exportfs call affecting btrfs]
[v8: akpm@linux-foundation.org: use static inline function, not macro]
[v7: dan.magenheimer@oracle.com: cleanup sysfs and remove cleancache prefix]
[v6: JBeulich@novell.com: robustly handle buggy fs encode_fh actor definition]
[v5: jeremy@goop.org: clean up global usage and static var names]
[v5: jeremy@goop.org: simplify init hook and any future fs init changes]
[v5: hch@infradead.org: cleaner non-global interface for ops registration]
[v4: adilger@sun.com: interface must support exportfs FS's]
[v4: hch@infradead.org: interface must support 64-bit FS on 32-bit kernel]
[v3: akpm@linux-foundation.org: use one ops struct to avoid pointer hops]
[v3: akpm@linux-foundation.org: document and ensure PageLocked reqts are met]
[v3: ngupta@vflare.org: fix success/fail codes, change funcs to void]
[v2: viro@ZenIV.linux.org.uk: use sane types]
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Andreas Dilger <adilger@sun.com>
Acked-by: Jan Beulich <JBeulich@novell.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik Van Riel <riel@redhat.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
2011-05-26 10:01:36 -06:00
Andrea Arcangeli 33a938774f mm: compaction: don't depend on HUGETLB_PAGE
Commit 5d6892407 ("thp: select CONFIG_COMPACTION if TRANSPARENT_HUGEPAGE
enabled") causes this warning during the configuration process:

  warning: (TRANSPARENT_HUGEPAGE) selects COMPACTION which has unmet
  direct dependencies (EXPERIMENTAL && HUGETLB_PAGE && MMU)

COMPACTION doesn't depend on HUGETLB_PAGE, it doesn't depend on THP
either, it is also useful for regular alloc_pages(order > 0) including
the very kernel stack during fork (THREAD_ORDER = 1).  It's always
better to enable COMPACTION.

The warning should be an error because we would end up with MIGRATION
not selected, and COMPACTION wouldn't work without migration (despite it
seems to build with an inline migrate_pages returning -ENOSYS).

I'd also like to remove EXPERIMENTAL: compaction has been in the kernel
for some releases (for full safety the default remains disabled which I
think is enough).

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Luca Tettamanti <kronos.it@gmail.com>
Tested-by: Luca Tettamanti <kronos.it@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-26 10:50:02 +10:00
Andrea Arcangeli 5d6892407c thp: select CONFIG_COMPACTION if TRANSPARENT_HUGEPAGE enabled
With transparent hugepage support we need compaction for the "defrag"
sysfs controls to be effective.

At the moment THP hangs the system if COMPACTION isn't selected, as
without COMPACTION lumpy reclaim wouldn't be entirely disabled.  So at the
moment it's not orthogonal.  When lumpy will be removed from the VM I can
remove the select COMPACTION in theory, but then 99% of THP users would be
still doing a mistake in disabling compaction, even if the mistake won't
return in fatal runtime but just slightly degraded performance.  So from a
theoretical standpoing forcing the below select is not needed (the
dependency isn't strict nor at compile time nor at runtime) but from a
practical standpoint it is safer.

If anybody really wants THP to run without compaction, it'd be such a
weird setup that editing the Kconfig file to allow it will be surely not a
problem.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 17:32:45 -08:00
Andrea Arcangeli 13ece886d9 thp: transparent hugepage config choice
Allow to choose between the always|madvise default for page faults and
khugepaged at config time.  madvise guarantees zero risk of higher memory
footprint for applications (applications using madvise(MADV_HUGEPAGE)
won't risk to use any more memory by backing their virtual regions with
hugepages).

Initially set the default to N and don't depend on EMBEDDED.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 17:32:45 -08:00
Johannes Weiner f2d6bfe9ff thp: add x86 32bit support
Add support for transparent hugepages to x86 32bit.

Share the same VM_ bitflag for VM_MAPPED_COPY.  mm/nommu.c will never
support transparent hugepages.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 17:32:44 -08:00
Andrea Arcangeli 4c76d9d1fb thp: CONFIG_TRANSPARENT_HUGEPAGE
Add config option.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 17:32:40 -08:00
Linus Torvalds 0fc0531e0a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: update comments to reflect that percpu allocations are always zero-filled
  percpu: Optimize __get_cpu_var()
  x86, percpu: Optimize this_cpu_ptr
  percpu: clear memory allocated with the km allocator
  percpu: fix build breakage on s390 and cleanup build configuration tests
  percpu: use percpu allocator on UP too
  percpu: reduce PCPU_MIN_UNIT_SIZE to 32k
  vmalloc: pcpu_get/free_vm_areas() aren't needed on UP

Fixed up trivial conflicts in include/linux/percpu.h
2010-10-22 17:31:36 -07:00
Andrea Arcangeli 152e0659fc mm: avoid warning when COMPACTION is selected
COMPACTION enables MIGRATION, but MIGRATION spawns a warning if numa or
memhotplug aren't selected.  However MIGRATION doesn't depend on them.  I
guess it's just trying to be strict doing a double check on who's enabling
it, but it doesn't know that compaction also enables MIGRATION.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-09 18:57:24 -07:00
Tejun Heo bbddff0545 percpu: use percpu allocator on UP too
On UP, percpu allocations were redirected to kmalloc.  This has the
following problems.

* For certain amount of allocations (determined by
  PERCPU_DYNAMIC_EARLY_SLOTS and PERCPU_DYNAMIC_EARLY_SIZE), percpu
  allocator can be used before the usual kernel memory allocator is
  brought online.  On SMP, this is used to initialize the kernel
  memory allocator.

* percpu allocator honors alignment upto PAGE_SIZE but kmalloc()
  doesn't.  For example, workqueue makes use of larger alignments for
  cpu_workqueues.

Currently, users of percpu allocators need to handle UP differently,
which is somewhat fragile and ugly.  Other than small amount of
memory, there isn't much to lose by enabling percpu allocator on UP.
It can simply use kernel memory based chunk allocation which was added
for SMP archs w/o MMUs.

This patch removes mm/percpu_up.c, builds mm/percpu.c on UP too and
makes UP build use percpu-km.  As percpu addresses and kernel
addresses are always identity mapped and static percpu variables don't
need any special treatment, nothing is arch dependent and mm/percpu.c
implements generic setup_per_cpu_areas() for UP.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
2010-09-08 11:11:23 +02:00
Yinghai Lu 95f72d1ed4 lmb: rename to memblock
via following scripts

      FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

      sed -i \
        -e 's/lmb/memblock/g' \
        -e 's/LMB/MEMBLOCK/g' \
        $FILES

      for N in $(find . -name lmb.[ch]); do
        M=$(echo $N | sed 's/lmb/memblock/g')
        mv $N $M
      done

and remove some wrong change like lmbench and dlmb etc.

also move memblock.c from lib/ to mm/

Suggested-by: Ingo Molnar <mingo@elte.hu>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-14 17:14:00 +10:00
Mel Gorman e9e96b39f9 mm: allow CONFIG_MIGRATION to be set without CONFIG_NUMA or memory hot-remove
CONFIG_MIGRATION currently depends on CONFIG_NUMA or on the architecture
being able to hot-remove memory.  The main users of page migration such as
sys_move_pages(), sys_migrate_pages() and cpuset process migration are
only beneficial on NUMA so it makes sense.

As memory compaction will operate within a zone and is useful on both NUMA
and non-NUMA systems, this patch allows CONFIG_MIGRATION to be set if the
user selects CONFIG_COMPACTION as an option.

[akpm@linux-foundation.org: Depend on CONFIG_HUGETLB_PAGE]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:06:59 -07:00
Linus Torvalds a626b46e17 Merge branch 'x86-bootmem-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-bootmem-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits)
  early_res: Need to save the allocation name in drop_range_partial()
  sparsemem: Fix compilation on PowerPC
  early_res: Add free_early_partial()
  x86: Fix non-bootmem compilation on PowerPC
  core: Move early_res from arch/x86 to kernel/
  x86: Add find_fw_memmap_area
  Move round_up/down to kernel.h
  x86: Make 32bit support NO_BOOTMEM
  early_res: Enhance check_and_double_early_res
  x86: Move back find_e820_area to e820.c
  x86: Add find_early_area_size
  x86: Separate early_res related code from e820.c
  x86: Move bios page reserve early to head32/64.c
  sparsemem: Put mem map for one node together.
  sparsemem: Put usemap for one node together
  x86: Make 64 bit use early_res instead of bootmem before slab
  x86: Only call dma32_reserve_bootmem 64bit !CONFIG_NUMA
  x86: Make early_node_mem get mem > 4 GB if possible
  x86: Dynamically increase early_res array size
  x86: Introduce max_early_res and early_res_count
  ...
2010-03-03 08:15:05 -08:00
Yinghai Lu 9bdac91424 sparsemem: Put mem map for one node together.
Add vmemmap_alloc_block_buf for mem map only.

It will fallback to the old way if it cannot get a block that big.

Before this patch, when a node have 128g ram installed, memmap are
split into two parts or more.
[    0.000000]  [ffffea0000000000-ffffea003fffffff] PMD -> [ffff880100600000-ffff88013e9fffff] on node 1
[    0.000000]  [ffffea0040000000-ffffea006fffffff] PMD -> [ffff88013ec00000-ffff88016ebfffff] on node 1
[    0.000000]  [ffffea0070000000-ffffea007fffffff] PMD -> [ffff882000600000-ffff8820105fffff] on node 0
[    0.000000]  [ffffea0080000000-ffffea00bfffffff] PMD -> [ffff882010800000-ffff8820507fffff] on node 0
[    0.000000]  [ffffea00c0000000-ffffea00dfffffff] PMD -> [ffff882050a00000-ffff8820709fffff] on node 0
[    0.000000]  [ffffea00e0000000-ffffea00ffffffff] PMD -> [ffff884000600000-ffff8840205fffff] on node 2
[    0.000000]  [ffffea0100000000-ffffea013fffffff] PMD -> [ffff884020800000-ffff8840607fffff] on node 2
[    0.000000]  [ffffea0140000000-ffffea014fffffff] PMD -> [ffff884060a00000-ffff8840709fffff] on node 2
[    0.000000]  [ffffea0150000000-ffffea017fffffff] PMD -> [ffff886000600000-ffff8860305fffff] on node 3
[    0.000000]  [ffffea0180000000-ffffea01bfffffff] PMD -> [ffff886030800000-ffff8860707fffff] on node 3
[    0.000000]  [ffffea01c0000000-ffffea01ffffffff] PMD -> [ffff888000600000-ffff8880405fffff] on node 4
[    0.000000]  [ffffea0200000000-ffffea022fffffff] PMD -> [ffff888040800000-ffff8880707fffff] on node 4
[    0.000000]  [ffffea0230000000-ffffea023fffffff] PMD -> [ffff88a000600000-ffff88a0105fffff] on node 5
[    0.000000]  [ffffea0240000000-ffffea027fffffff] PMD -> [ffff88a010800000-ffff88a0507fffff] on node 5
[    0.000000]  [ffffea0280000000-ffffea029fffffff] PMD -> [ffff88a050a00000-ffff88a0709fffff] on node 5
[    0.000000]  [ffffea02a0000000-ffffea02bfffffff] PMD -> [ffff88c000600000-ffff88c0205fffff] on node 6
[    0.000000]  [ffffea02c0000000-ffffea02ffffffff] PMD -> [ffff88c020800000-ffff88c0607fffff] on node 6
[    0.000000]  [ffffea0300000000-ffffea030fffffff] PMD -> [ffff88c060a00000-ffff88c0709fffff] on node 6
[    0.000000]  [ffffea0310000000-ffffea033fffffff] PMD -> [ffff88e000600000-ffff88e0305fffff] on node 7
[    0.000000]  [ffffea0340000000-ffffea037fffffff] PMD -> [ffff88e030800000-ffff88e0707fffff] on node 7

after patch will get
[    0.000000]  [ffffea0000000000-ffffea006fffffff] PMD -> [ffff880100200000-ffff88016e5fffff] on node 0
[    0.000000]  [ffffea0070000000-ffffea00dfffffff] PMD -> [ffff882000200000-ffff8820701fffff] on node 1
[    0.000000]  [ffffea00e0000000-ffffea014fffffff] PMD -> [ffff884000200000-ffff8840701fffff] on node 2
[    0.000000]  [ffffea0150000000-ffffea01bfffffff] PMD -> [ffff886000200000-ffff8860701fffff] on node 3
[    0.000000]  [ffffea01c0000000-ffffea022fffffff] PMD -> [ffff888000200000-ffff8880701fffff] on node 4
[    0.000000]  [ffffea0230000000-ffffea029fffffff] PMD -> [ffff88a000200000-ffff88a0701fffff] on node 5
[    0.000000]  [ffffea02a0000000-ffffea030fffffff] PMD -> [ffff88c000200000-ffff88c0701fffff] on node 6
[    0.000000]  [ffffea0310000000-ffffea037fffffff] PMD -> [ffff88e000200000-ffff88e0701fffff] on node 7

-v2: change buf to vmemmap_buf instead according to Ingo
     also add CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER according to Ingo
-v3: according to Andrew, use sizeof(name) instead of hard coded 15

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-19-git-send-email-yinghai@kernel.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-12 09:42:38 -08:00
Paul Mundt 0176bd3dab sh: Drop down to a single quicklist.
We previously had 2 quicklists, one for the PGD case and one for PTEs.
Now that the PGD/PMD cases are handled through slab caches due to the
multi-level configurability, only the PTE quicklist remains. As such,
reduce NR_QUICK to its appropriate size and bump down the PTE quicklist
index.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-05 12:35:00 +09:00
Andi Kleen 27df5068e2 HWPOISON: Add PROC_FS dependency to hwpoison injector v2
The injector filter requires stable_page_flags() which is supplied
by procfs. So make it dependent on that.

Also add ifdefs around the filter code in memory-failure.c so that
when the filter is disabled due to missing dependencies the whole
code still builds.

Reported-by: Ingo Molnar
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2009-12-21 19:56:42 +01:00
David Howells 6e14154676 NOMMU: Optimise away the {dac_,}mmap_min_addr tests
In NOMMU mode clamp dac_mmap_min_addr to zero to cause the tests on it to be
skipped by the compiler.  We do this as the minimum mmap address doesn't make
any sense in NOMMU mode.

mmap_min_addr and round_hint_to_min() can be discarded entirely in NOMMU mode.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-12-17 09:25:19 +11:00
Andi Kleen 413f9efbc5 HWPOISON: mention HWPoison in Kconfig entry
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2009-12-16 12:20:00 +01:00
Wu Fengguang 478c5ffc0b HWPOISON: add page flags filter
When specified, only poison pages if ((page_flags & mask) == value).

-       corrupt-filter-flags-mask
-       corrupt-filter-flags-value

This allows stress testing of many kinds of pages.

Strictly speaking, the buddy pages requires taking zone lock, to avoid
setting PG_hwpoison on a "was buddy but now allocated to someone" page.
However we can just do nothing because we set PG_locked in the beginning,
this prevents the page allocator from allocating it to someone. (It will
BUG() on the unexpected PG_locked, which is fine for hwpoison testing.)

[AK: Add select PROC_PAGE_MONITOR to satisfy dependency]

CC: Nick Piggin <npiggin@suse.de>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2009-12-16 12:19:59 +01:00