Commit Graph

25 Commits

Author SHA1 Message Date
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Geert Uytterhoeven 9429ec96c2 um: Preinclude include/linux/kern_levels.h
The userspace part of UML uses the asm-offsets.h generator mechanism to
create definitions for UM_KERN_<LEVEL> that match the in-kernel
KERN_<LEVEL> constant definitions.

As of commit 04d2c8c83d ("printk: convert
the format for KERN_<LEVEL> to a 2 byte pattern"), KERN_<LEVEL> is no
longer expanded to the literal '"<LEVEL>"', but to '"\001" "LEVEL"', i.e.
it contains two parts.

However, the combo of DEFINE_STR() in
arch/x86/um/shared/sysdep/kernel-offsets.h and sed-y in Kbuild doesn't
support string literals consisting of multiple parts. Hence for all
UM_KERN_<LEVEL> definitions, only the SOH character is retained in the actual
definition, while the remainder ends up in the comment. E.g. in
include/generated/asm-offsets.h we get

    #define UM_KERN_INFO "\001" /* "6" KERN_INFO */

instead of

    #define UM_KERN_INFO "\001" "6" /* KERN_INFO */

This causes spurious '^A' output in some kernel messages:

    Calibrating delay loop... 4640.76 BogoMIPS (lpj=23203840)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 256
    ^AChecking that host ptys support output SIGIO...Yes
    ^AChecking that host ptys support SIGIO on close...No, enabling workaround
    ^AUsing 2.6 host AIO
    NET: Registered protocol family 16
    bio: create slab <bio-0> at 0
    Switching to clocksource itimer

To fix this:
  - Move the mapping from UM_KERN_<LEVEL> to KERN_<LEVEL> from
    arch/um/include/shared/common-offsets.h to
    arch/um/include/shared/user.h, which is preincluded for all userspace
    parts,
  - Preinclude include/linux/kern_levels.h for all userspace parts, to
    obtain the in-kernel KERN_<LEVEL> constant definitions. This doesn't
    violate the kernel/userspace separation, as include/linux/kern_levels.h
    is self-contained and doesn't expose any other kernel internals.
  - Remove the now unused STR() and DEFINE_STR() macros.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
2012-09-27 20:20:09 +02:00
Al Viro 64405360ce um: don't bother trying to rebuild CHECKFLAGS for USER_OBJS
... just strip NOSTDINC_FLAGS out of it for those

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25 00:29:56 +01:00
Al Viro 5c48b108ec um: take arch/um/sys-x86 to arch/x86/um
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
2011-11-02 14:15:05 +01:00
Al Viro 078073a3d4 um: -include user.h for USER_OBJ, trim includes
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
2011-11-02 14:14:44 +01:00
Jeff Dike 42fda66387 uml: throw out CONFIG_MODE_TT
This patchset throws out tt mode, which has been non-functional for a while.

This is done in phases, interspersed with code cleanups on the affected files.

The removal is done as follows:
	remove all code, config options, and files which depend on
CONFIG_MODE_TT
	get rid of the CHOOSE_MODE macro, which decided whether to
call tt-mode or skas-mode code, and replace invocations with their
skas portions
	replace all now-trivial procedures with their skas equivalents

There are now a bunch of now-redundant pieces of data structures, including
mode-specific pieces of the thread structure, pt_regs, and mm_context.  These
are all replaced with their skas-specific contents.

As part of the ongoing style compliance project, I made a style pass over all
files that were changed.  There are three such patches, one for each phase,
covering the files affected by that phase but no later ones.

I noticed that we weren't freeing the LDT state associated with a process when
it exited, so that's fixed in one of the later patches.

The last patch is a tidying patch which I've had for a while, but which caused
inexplicable crashes under tt mode.  Since that is no longer a problem, this
can now go in.

This patch:

Start getting rid of tt mode support.

This patch throws out CONFIG_MODE_TT and all config options, code, and files
which depend on it.

CONFIG_MODE_SKAS is gone and everything that depends on it is included
unconditionally.

The few changed lines are in re-written Kconfig help, lines which needed
something skas-related removed from them, and a few more which weren't
strictly deletions.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:05 -07:00
Al Viro 2b8232ce51 minimal build fixes for uml (fallout from x86 merge)
a) include/asm-um/arch can't just point to include/asm-$(SUBARCH) now
 b) arch/{i386,x86_64}/crypto are merged now
 c) subarch-obj needed changes
 d) cpufeature_64.h should pull "cpufeature_32.h", not <asm/cpufeature_32.h>
    since it can be included from asm-um/cpufeature.h
 e) in case of uml-i386 we need CONFIG_X86_32 for make and gcc, but not
    for Kconfig
 f) sysctl.c shouldn't do vdso_enabled for uml-i386 (actually, that one
    should be registered from corresponding arch/*/kernel/*, with ifdef
    going away; that's a separate patch, though).

With that and with Stephen's patch ("[PATCH net-2.6] uml: hard_header fix")
we have uml allmodconfig building both on i386 and amd64.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13 09:57:15 -07:00
Al Viro c537b99450 [PATCH] (uml) sparse flags for userland glue are missing $(CF)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-14 15:27:48 -07:00
Sam Ravnborg 5e8d780d74 kbuild: fix ia64 breakage after introducing make -rR
kbuild used $¤(*F to get filename of target without extension.
This was used in several places all over kbuild, but introducing
make -rR broke his for all cases where we specified full path to
target/prerequsite. It is assumed that make -rR disables old style
suffix-rules which is why is suddenly failed.

ia64 was impacted by this change because several div* routines in
arch/ia64/lib are build using explicit paths and then kbuild failed.

Thanks to David Mosberger-Tang <David.Mosberger@acm.org> for an explanation
what was the root-cause and for testing on ia64.

This patch also fixes two uses of $(*F) in arch/um

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-07-01 09:58:02 +02:00
Paolo 'Blaisorblade' Giarrusso 7b12b91379 [PATCH] uml: cleanup unprofile expression and build infrastructure
*) Rather than duplicate in various buggy ways the application of
   CFLAGS_NO_HARDENING and UNPROFILE (which apply to the same files),
   centralize it in Makefile.rules.  UNPROFILE_OBJS mustn't be listed in
   USER_OBJS but are compiled as such.

I've also verified that unprofile didn't work in the current form, because we
set _c_flags directly (using CFLAGS and not USER_CFLAGS, which is wrong),
which is normally used by c_flags, but we also override c_flags for all
USER_OBJS, and there we don't call unprofile.

Instead it only worked for unmap.o, the only one which wasn't a USER_OBJ.

We need to set c_flags (which is not a public Kbuild API) to clear a lot of
compilation flags like -nostdinc which Kbuild forces on everything.

*) Rather than $(CFLAGS_$(notdir $@)), which expands to CFLAGS_anObj.s when
   building "anObj.s", use $(CFLAGS_$(*F).o) which always accesses
   CFLAGS_anObj.o, like done by Kbuild.

*) Make c_flags apply to all targets having the same basename, rather than
   listing .s, .i, .lst and .o, with the use (which I tested) of

	$(USER_OBJS:.o=.%): c_flags = ...

and of

 -      $(obj)/unmap.c: _c_flags = ...
 +      $(obj)/unmap.%: _c_flags = ...

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-01 18:17:45 -07:00
Paolo 'Blaisorblade' Giarrusso ccea15f45e [PATCH] uml: support sparse for userspace files
Make sparse checker work for userspace files - it normally gets -nostdinc
separately, so avoid having it for userspace files.  Also, add -D$(SUBARCH)
for multiarch hosts (i.e.  AMD64 with compatibility headers).

It works, the only problem is a bit of bogus warnings for system headers, but
they're not too many.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:36 -07:00
Al Viro 7b99edc78d [PATCH] uml: clean up remapping code build magic
kills unmap magic

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:51 -08:00
Al Viro de2fe5e07d [PATCH] uml: eliminate symlinks to host arch
kills symlinks in arch/um/sys-*

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:50 -08:00
Paolo 'Blaisorblade' Giarrusso 9ce7677cfd [PATCH] uml: arch/um/scripts/Makefile.rules - remove duplicated code
Duplicated code - the patch adding it was probably applied twice without
enough care.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-18 11:19:44 -08:00
Bodo Stroesser 858259cf7d [PATCH] uml: maintain own LDT entries
Patch imlements full LDT handling in SKAS:
 * UML holds it's own LDT table, used to deliver data on
   modify_ldt(READ)
 * UML disables the default_ldt, inherited from the host (SKAS3)
   or resets LDT entries, set by host's clib and inherited in
   SKAS0
 * A new global variable skas_needs_stub is inserted, that
   can be used to decide, whether stub-pages must be supported
   or not.
 * Uses the syscall-stub to replace missing PTRACE_LDT (therefore,
   write_ldt_entry needs to be modified)

Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:31 -08:00
Paolo 'Blaisorblade' Giarrusso 54a8a2220c [PATCH] uml: allow building .s/.i/.lst files from userspace files
For files which need to include glibc headers (i.e. userspace files), we
specified the correct flags only for .o, not for .s/.lst/.i. Fix this.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-10 08:36:00 -07:00
viro@ZenIV.linux.org.uk 2624f124b3 [PATCH] sparse on uml (infrastructure bits)
Passes -m64 to sparse on uml/amd64, tells sparse to stay out of
USER_OBJS.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 10:31:58 -07:00
Al Viro 13abf81301 [PATCH] uml: remove libc reference in build
Remove an unneeded reference to libc.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:22 -07:00
Paolo 'Blaisorblade' Giarrusso 20d0021394 [PATCH] uml: allow building as 32-bit binary on 64bit host
This patch makes the command:

make ARCH=um SUBARCH=i386

work on x86_64 hosts (with support for building 32-bit binaries).  This is
especially needed since 64-bit UMLs don't support 32-bit emulation for guest
binaries, currently.  This has been tested in all possible cases and works.

Only exception is that I've built but not tested a 64-bit binary, because I
hadn't a 64-bit filesystem available.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-14 09:00:25 -07:00
Jeff Dike d67b569f5f [PATCH] uml: skas0 - separate kernel address space on stock hosts
UML has had two modes of operation - an insecure, slow mode (tt mode) in
which the kernel is mapped into every process address space which requires
no host kernel modifications, and a secure, faster mode (skas mode) in
which the UML kernel is in a separate host address space, which requires a
patch to the host kernel.

This patch implements something very close to skas mode for hosts which
don't support skas - I'm calling this skas0.  It provides the security of
the skas host patch, and some of the performance gains.

The two main things that are provided by the skas patch, /proc/mm and
PTRACE_FAULTINFO, are implemented in a way that require no host patch.

For the remote address space changing stuff (mmap, munmap, and mprotect),
we set aside two pages in the process above its stack, one of which
contains a little bit of code which can call mmap et al.

To update the address space, the system call information (system call
number and arguments) are written to the stub page above the code.  The
%esp is set to the beginning of the data, the %eip is set the the start of
the stub, and it repeatedly pops the information into its registers and
makes the system call until it sees a system call number of zero.  This is
to amortize the cost of the context switch across multiple address space
updates.

When the updates are done, it SIGSTOPs itself, and the kernel process
continues what it was doing.

For a PTRACE_FAULTINFO replacement, we set up a SIGSEGV handler in the
child, and let it handle segfaults rather than nullifying them.  The
handler is in the same page as the mmap stub.  The second page is used as
the stack.  The handler reads cr2 and err from the sigcontext, sticks them
at the base of the stack in a faultinfo struct, and SIGSTOPs itself.  The
kernel then reads the faultinfo and handles the fault.

A complication on x86_64 is that this involves resetting the registers to
the segfault values when the process is inside the kill system call.  This
breaks on x86_64 because %rcx will contain %rip because you tell SYSRET
where to return to by putting the value in %rcx.  So, this corrupts $rcx on
return from the segfault.  To work around this, I added an
arch_finish_segv, which on x86 does nothing, but which on x86_64 ptraces
the child back through the sigreturn.  This causes %rcx to be restored by
sigreturn and avoids the corruption.  Ultimately, I think I will replace
this with the trick of having it send itself a blocked signal which will be
unblocked by the sigreturn.  This will allow it to be stopped just after
the sigreturn, and PTRACE_SYSCALLed without all the back-and-forth of
PTRACE_SYSCALLing it through sigreturn.

This runs on a stock host, so theoretically (and hopefully), tt mode isn't
needed any more.  We need to make sure that this is better in every way
than tt mode, though.  I'm concerned about the speed of address space
updates and page fault handling, since they involve extra round-trips to
the child.  We can amortize the round-trip cost for large address space
updates by writing all of the operations to the data page and having the
child execute them all at the same time.  This will help fork and exec, but
not page faults, since they involve only one page.

I can't think of any way to help page faults, except to add something like
PTRACE_FAULTINFO to the host.  There is PTRACE_SIGINFO, but UML doesn't use
siginfo for SIGSEGV (or anything else) because there isn't enough
information in the siginfo struct to handle page faults (the faulting
operation type is missing).  Adding that would make PTRACE_SIGINFO a usable
equivalent to PTRACE_FAULTINFO.

As for the code itself:

- The system call stub is in arch/um/kernel/sys-$(SUBARCH)/stub.S.  It is
  put in its own section of the binary along with stub_segv_handler in
  arch/um/kernel/skas/process.c.  This is manipulated with run_syscall_stub
  in arch/um/kernel/skas/mem_user.c.  syscall_stub will execute any system
  call at all, but it's only used for mmap, munmap, and mprotect.

- The x86_64 stub calls sigreturn by hand rather than allowing the normal
  sigreturn to happen, because the normal sigreturn is a SA_RESTORER in
  UML's address space provided by libc.  Needless to say, this is not
  available in the child's address space.  Also, it does a couple of odd
  pops before that which restore the stack to the state it was in at the
  time the signal handler was called.

- There is a new field in the arch mmu_context, which is now a union.
  This is the pid to be manipulated rather than the /proc/mm file
  descriptor.  Code which deals with this now checks proc_mm to see whether
  it should use the usual skas code or the new code.

- userspace_tramp is now used to create a new host process for every UML
  process, rather than one per UML processor.  It checks proc_mm and
  ptrace_faultinfo to decide whether to map in the pages above its stack.

- start_userspace now makes CLONE_VM conditional on proc_mm since we need
  separate address spaces now.

- switch_mm_skas now just sets userspace_pid[0] to the new pid rather
  than PTRACE_SWITCH_MM.  There is an addition to userspace which updates
  its idea of the pid being manipulated each time around the loop.  This is
  important on exec, when the pid will change underneath userspace().

- The stub page has a pte, but it can't be mapped in using tlb_flush
  because it is part of tlb_flush.  This is why it's required for it to be
  mapped in by userspace_tramp.

Other random things:

- The stub section in uml.lds.S is page aligned.  This page is written
  out to the backing vm file in setup_physmem because it is mapped from
  there into user processes.

- There's some confusion with TASK_SIZE now that there are a couple of
  extra pages that the process can't use.  TASK_SIZE is considered by the
  elf code to be the usable process memory, which is reasonable, so it is
  decreased by two pages.  This confuses the definition of
  USER_PGDS_IN_LAST_PML4, making it too small because of the rounding down
  of the uneven division.  So we round it to the nearest PGDIR_SIZE rather
  than the lower one.

- I added a missing PT_SYSCALL_ARG6_OFFSET macro.

- um_mmu.h was made into a userspace-usable file.

- proc_mm and ptrace_faultinfo are globals which say whether the host
  supports these features.

- There is a bad interaction between the mm.nr_ptes check at the end of
  exit_mmap, stack randomization, and skas0.  exit_mmap will stop freeing
  pages at the PGDIR_SIZE boundary after the last vma.  If the stack isn't
  on the last page table page, the last pte page won't be freed, as it
  should be since the stub ptes are there, and exit_mmap will BUG because
  there is an unfreed page.  To get around this, TASK_SIZE is set to the
  next lowest PGDIR_SIZE boundary and mm->nr_ptes is decremented after the
  calls to init_stub_pte.  This ensures that we know the process stack (and
  all other process mappings) will be below the top page table page, and
  thus we know that mm->nr_ptes will be one too many, and can be
  decremented.

Things that need fixing:

- We may need better assurrences that the stub code is PIC.

- The stub pte is set up in init_new_context_skas.

- alloc_pgdir is probably the right place.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:44 -07:00
Paolo 'Blaisorblade' Giarrusso 60b2737de1 [PATCH] uml: fix linkage of tt mode against NPTL
With Al Viro <viro@parcelfarce.linux.theplanet.co.uk>

To make sure switcheroo() can execute when we remap all the executable
image, we used a trick to make it use a local copy of errno...  this trick
does not work with NPTL glibc, only with LinuxThreads, so use another
(simpler) one to make it work anyway.

Hopefully, a lot improved thanks to merging with the version of Al Viro
(which had his part of problems, though, i.e.  removing a fix to another
bug and not fixing the problem on i386).

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:32 -07:00
Jeff Dike 36ca1195ad [PATCH] uml: build cleanups
Fix a build failure when CONFIG_MODE_SKAS is disabled and make a Makefile
comment fit in 80 columns.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-13 20:58:43 -07:00
Jeff Dike 2ba491759f [PATCH] uml: tidy Makefile.rules
Just some breaking of some overly-long lines.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:36:36 -07:00
Paolo 'Blaisorblade' Giarrusso 776cfebb43 [PATCH] uml kbuild: avoid useless rebuilds
- Fix some problems with usage of $(targets) (sometimes missing, sometimes
  used badly) that trigger partial rebuilds when doing a rebuild.

- At that purpose, also factor out some common code for symlinks creation.

- Fix a x86-64 build warning, caused by -L/usr/lib, which is anyway useless,
  and invalid in the x86-64 case.

Tested on x86_64 and x86.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:36:33 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00