Commit Graph

17114 Commits

Author SHA1 Message Date
Linus Torvalds 73ecf3a6e3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (49 commits)
  serial8250: ratelimit "too much work" error
  serial: bfin_sport_uart: speed up sport RX sample rate to be 3% faster
  serial: abstraction for 8250 legacy ports
  serial/imx: check that the buffer is non-empty before sending it out
  serial: mfd: add more baud rates support
  jsm: Remove the uart port on errors
  Alchemy: Add UART PM methods.
  8250: allow platforms to override PM hook.
  altera_uart: Don't use plain integer as NULL pointer
  altera_uart: Fix missing prototype for registering an early console
  altera_uart: Fixup type usage of port flags
  altera_uart: Make it possible to use Altera UART and 8250 ports together
  altera_uart: Add support for different address strides
  altera_uart: Add support for getting mapbase and IRQ from resources
  altera_uart: Add support for polling mode (IRQ-less)
  serial: Factor out uart_poll_timeout() from 8250 driver
  serial: mark the 8250 driver as maintained
  serial: 8250: Don't delay after transmitter is ready.
  tty: MAINTAINERS: add drivers/serial/jsm/ as maintained driver
  vcs: invoke the vt update callback when /dev/vcs* is written to
  ...
2010-10-22 19:59:04 -07:00
Linus Torvalds 092e0e7e52 Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek
2010-10-22 10:52:56 -07:00
Linus Torvalds 5704e44d28 Merge branch 'config' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'config' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  BKL: introduce CONFIG_BKL.
  dabusb: remove the BKL
  sunrpc: remove the big kernel lock
  init/main.c: remove BKL notations
  blktrace: remove the big kernel lock
  rtmutex-tester: make it build without BKL
  dvb-core: kill the big kernel lock
  dvb/bt8xx: kill the big kernel lock
  tlclk: remove big kernel lock
  fix rawctl compat ioctls breakage on amd64 and itanic
  uml: kill big kernel lock
  parisc: remove big kernel lock
  cris: autoconvert trivial BKL users
  alpha: kill big kernel lock
  isapnp: BKL removal
  s390/block: kill the big kernel lock
  hpet: kill BKL, add compat_ioctl
2010-10-22 10:43:11 -07:00
Alan Cox 0587102cf9 tty: icount changeover for other main devices
Again basically cut and paste

Convert the main driver set to use the hooks for GICOUNT

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:20:05 -07:00
Linus Torvalds bc4016f481 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (29 commits)
  sched: Export account_system_vtime()
  sched: Call tick_check_idle before __irq_enter
  sched: Remove irq time from available CPU power
  sched: Do not account irq time to current task
  x86: Add IRQ_TIME_ACCOUNTING
  sched: Add IRQ_TIME_ACCOUNTING, finer accounting of irq time
  sched: Add a PF flag for ksoftirqd identification
  sched: Consolidate account_system_vtime extern declaration
  sched: Fix softirq time accounting
  sched: Drop group_capacity to 1 only if local group has extra capacity
  sched: Force balancing on newidle balance if local group has capacity
  sched: Set group_imb only a task can be pulled from the busiest cpu
  sched: Do not consider SCHED_IDLE tasks to be cache hot
  sched: Drop all load weight manipulation for RT tasks
  sched: Create special class for stop/migrate work
  sched: Unindent labels
  sched: Comment updates: fix default latency and granularity numbers
  tracing/sched: Add sched_pi_setprio tracepoint
  sched: Give CPU bound RT tasks preference
  sched: Try not to migrate higher priority RT tasks
  ...
2010-10-21 12:55:43 -07:00
Linus Torvalds 5d70f79b5e Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (163 commits)
  tracing: Fix compile issue for trace_sched_wakeup.c
  [S390] hardirq: remove pointless header file includes
  [IA64] Move local_softirq_pending() definition
  perf, powerpc: Fix power_pmu_event_init to not use event->ctx
  ftrace: Remove recursion between recordmcount and scripts/mod/empty
  jump_label: Add COND_STMT(), reducer wrappery
  perf: Optimize sw events
  perf: Use jump_labels to optimize the scheduler hooks
  jump_label: Add atomic_t interface
  jump_label: Use more consistent naming
  perf, hw_breakpoint: Fix crash in hw_breakpoint creation
  perf: Find task before event alloc
  perf: Fix task refcount bugs
  perf: Fix group moving
  irq_work: Add generic hardirq context callbacks
  perf_events: Fix transaction recovery in group_sched_in()
  perf_events: Fix bogus AMD64 generic TLB events
  perf_events: Fix bogus context time tracking
  tracing: Remove parent recording in latency tracer graph options
  tracing: Use one prologue for the preempt irqs off tracer function tracers
  ...
2010-10-21 12:54:49 -07:00
Linus Torvalds 888a6f77e0 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (52 commits)
  sched: fix RCU lockdep splat from task_group()
  rcu: using ACCESS_ONCE() to observe the jiffies_stall/rnp->qsmask value
  sched: suppress RCU lockdep splat in task_fork_fair
  net: suppress RCU lockdep false positive in sock_update_classid
  rcu: move check from rcu_dereference_bh to rcu_read_lock_bh_held
  rcu: Add advice to PROVE_RCU_REPEATEDLY kernel config parameter
  rcu: Add tracing data to support queueing models
  rcu: fix sparse errors in rcutorture.c
  rcu: only one evaluation of arg in rcu_dereference_check() unless sparse
  kernel: Remove undead ifdef CONFIG_DEBUG_LOCK_ALLOC
  rcu: fix _oddness handling of verbose stall warnings
  rcu: performance fixes to TINY_PREEMPT_RCU callback checking
  rcu: upgrade stallwarn.txt documentation for CPU-bound RT processes
  vhost: add __rcu annotations
  rcu: add comment stating that list_empty() applies to RCU-protected lists
  rcu: apply TINY_PREEMPT_RCU read-side speedup to TREE_PREEMPT_RCU
  rcu: combine duplicate code, courtesy of CONFIG_PREEMPT_RCU
  rcu: Upgrade srcu_read_lock() docbook about SRCU grace periods
  rcu: document ways of stalling updates in low-memory situations
  rcu: repair code-duplication FIXMEs
  ...
2010-10-21 12:54:12 -07:00
Linus Torvalds a8fe150098 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (26 commits)
  selinux: include vmalloc.h for vmalloc_user
  secmark: fix config problem when CONFIG_NF_CONNTRACK_SECMARK is not set
  selinux: implement mmap on /selinux/policy
  SELinux: allow userspace to read policy back out of the kernel
  SELinux: drop useless (and incorrect) AVTAB_MAX_SIZE
  SELinux: deterministic ordering of range transition rules
  kernel: roundup should only reference arguments once
  kernel: rounddown helper function
  secmark: export secctx, drop secmark in procfs
  conntrack: export lsm context rather than internal secid via netlink
  security: secid_to_secctx returns len when data is NULL
  secmark: make secmark object handling generic
  secmark: do not return early if there was no error
  AppArmor: Ensure the size of the copy is < the buffer allocated to hold it
  TOMOYO: Print URL information before panic().
  security: remove unused parameter from security_task_setscheduler()
  tpm: change 'tpm_suspend_pcr' to be module parameter
  selinux: fix up style problem on /selinux/status
  selinux: change to new flag variable
  selinux: really fix dependency causing parallel compile failure.
  ...
2010-10-21 12:41:19 -07:00
Linus Torvalds 2017bd1945 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (22 commits)
  ceph: do not carry i_lock for readdir from dcache
  fs/ceph/xattr.c: Use kmemdup
  rbd: passing wrong variable to bvec_kunmap_irq()
  rbd: null vs ERR_PTR
  ceph: fix num_pages_free accounting in pagelist
  ceph: add CEPH_MDS_OP_SETDIRLAYOUT and associated ioctl.
  ceph: don't crash when passed bad mount options
  ceph: fix debugfs warnings
  block: rbd: removing unnecessary test
  block: rbd: fixed may leaks
  ceph: switch from BKL to lock_flocks()
  ceph: preallocate flock state without locks held
  ceph: add pagelist_reserve, pagelist_truncate, pagelist_set_cursor
  ceph: use mapping->nrpages to determine if mapping is empty
  ceph: only invalidate on check_caps if we actually have pages
  ceph: do not hide .snap in root directory
  rbd: introduce rados block device (rbd), based on libceph
  ceph: factor out libceph from Ceph file system
  ceph-rbd: osdc support for osd call and rollback operations
  ceph: messenger and osdc changes for rbd
  ...
2010-10-21 12:38:28 -07:00
David S. Miller 2198a10b50 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	net/core/dev.c
2010-10-21 08:43:05 -07:00
David S. Miller 9941fb6276 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6 2010-10-21 08:21:34 -07:00
Patrick McHardy 3b1a1ce6f4 Merge branch 'for-patrick' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/lvs-test-2.6 2010-10-21 16:25:51 +02:00
Balazs Scheidler cc6eb43385 tproxy: use the interface primary IP address as a default value for --on-ip
The REDIRECT target and the older TProxy versions used the primary address
of the incoming interface as the default value of the --on-ip parameter.
This was unintentionally changed during the initial TProxy submission and
caused confusion among users.

Since IPv6 has no notion of primary address, we just select the first address
on the list: this way the socket lookup finds wildcard bound sockets
properly and we cannot really do better without the user telling us the
IPv6 address of the proxy.

This is implemented for both IPv4 and IPv6.

Signed-off-by: Balazs Scheidler <bazsi@balabit.hu>
Signed-off-by: KOVACS Krisztian <hidden@balabit.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-21 16:21:10 +02:00
Balazs Scheidler b64c9256a9 tproxy: added IPv6 support to the socket match
The ICMP extraction bits were contributed by Harry Mason.

Signed-off-by: Balazs Scheidler <bazsi@balabit.hu>
Signed-off-by: KOVACS Krisztian <hidden@balabit.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-21 16:19:42 +02:00
Balazs Scheidler 6ad7889327 tproxy: added IPv6 support to the TPROXY target
This requires a new revision as the old target structure was
IPv4 specific.

Signed-off-by: Balazs Scheidler <bazsi@balabit.hu>
Signed-off-by: KOVACS Krisztian <hidden@balabit.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-21 16:17:26 +02:00
Chuck Lever 9247685088 SUNRPC: Properly initialize sock_xprt.srcaddr in all cases
The source address field in the transport's sock_xprt is initialized
ONLY IF the RPC application passed a pointer to a source address
during the call to rpc_create().  However, xs_bind() subsequently uses
the value of this field without regard to whether the source address
was initialized during transport creation or not.

So far we've been lucky: the uninitialized value of this field is
zeroes.  xs_bind(), until recently, used only the sin[6]_addr field in
this sockaddr, and all zeroes is a valid value for this: it means
ANYADDR.  This is a happy coincidence.

However, xs_bind() now wants to use the sa_family field as well, and
expects it to be initialized to something other than zero.

Therefore, the source address sockaddr field should be fully
initialized at transport create time in _every_ case, not just when
the RPC application wants to use a specific bind address.

Bruce added a workaround for this missing initialization by adjusting
commit 6bc9638a, but the "right" way to do this is to ensure that the
source address sockaddr is always correctly initialized from the
get-go.

This patch doesn't introduce a behavior change.  It's simply a
clean-up of Bruce's fix, to prevent future problems of this kind.  It
may look like overkill, but

  a) it clearly documents the default initial value of this field,

  b) it doesn't assume that the sockaddr_storage memory is first
     initialized to any particular value, and

  c) it will fail verbosely if some unknown address family is passed
     in

Originally introduced by commit d3bc9a1d.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-21 10:11:47 -04:00
Chuck Lever 4232e8634a SUNRPC: Use conventional switch statement when reclassifying sockets
Clean up.

Defensive coding: If "family" is ever something that is neither
AF_INET nor AF_INET6, xs_reclassify_socket6() is not the appropriate
default action.  Choose to do nothing in that case.

Introduced by commit 6bc9638a.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-21 10:11:46 -04:00
Tejun Heo a25e758c5f sunrpc/xprtrdma: clean up workqueue usage
* Create and use svc_rdma_wq instead of using the system workqueue and
  flush_scheduled_work().  This workqueue is necessary to serve as
  flushing domain for rdma->sc_work which is used to destroy itself
  and thus can't be flushed explicitly.

* Replace cancel_delayed_work() + flush_scheduled_work() with
  cancel_delayed_work_sync().

* Implement synchronous connect in xprt_rdma_connect() using
  flush_delayed_work() on the rdma_connect work instead of using
  flush_scheduled_work().

This is to prepare for the deprecation and removal of
flush_scheduled_work().

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-21 10:11:45 -04:00
Balazs Scheidler 0a513f6af9 tproxy: allow non-local binds of IPv6 sockets if IP_TRANSPARENT is enabled
Signed-off-by: Balazs Scheidler <bazsi@balabit.hu>
Signed-off-by: KOVACS Krisztian <hidden@balabit.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-21 16:10:03 +02:00
Balazs Scheidler 6c46862280 tproxy: added tproxy sockopt interface in the IPV6 layer
Support for IPV6_RECVORIGDSTADDR sockopt for UDP sockets were contributed by
Harry Mason.

Signed-off-by: Balazs Scheidler <bazsi@balabit.hu>
Signed-off-by: KOVACS Krisztian <hidden@balabit.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-21 16:08:28 +02:00
Balazs Scheidler aa976fc011 tproxy: added udp6_lib_lookup function
Just like with IPv4, we need access to the UDP hash table to look up local
sockets, but instead of exporting the global udp_table, export a lookup
function.

Signed-off-by: Balazs Scheidler <bazsi@balabit.hu>
Signed-off-by: KOVACS Krisztian <hidden@balabit.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-21 16:05:41 +02:00
Balazs Scheidler 88440ae70e tproxy: added const specifiers to udp lookup functions
The parameters for various UDP lookup functions were non-const, even though
they could be const. TProxy has some const references and instead of
downcasting it, I added const specifiers along the path.

Signed-off-by: Balazs Scheidler <bazsi@balabit.hu>
Signed-off-by: KOVACS Krisztian <hidden@balabit.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-21 16:04:33 +02:00
Balazs Scheidler e97c3e278e tproxy: split off ipv6 defragmentation to a separate module
Like with IPv4, TProxy needs IPv6 defragmentation but does not
require connection tracking. Since defragmentation was coupled
with conntrack, I split off the two, creating an nf_defrag_ipv6 module,
similar to the already existing nf_defrag_ipv4.

Signed-off-by: Balazs Scheidler <bazsi@balabit.hu>
Signed-off-by: KOVACS Krisztian <hidden@balabit.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-21 16:03:43 +02:00
Arnd Bergmann 6de5bd128d BKL: introduce CONFIG_BKL.
With all the patches we have queued in the BKL removal tree, only a
few dozen modules are left that actually rely on the BKL, and even
there are lots of low-hanging fruit. We need to decide what to do
about them, this patch illustrates one of the options:

Every user of the BKL is marked as 'depends on BKL' in Kconfig,
and the CONFIG_BKL becomes a user-visible option. If it gets
disabled, no BKL using module can be built any more and the BKL
code itself is compiled out.

The one exception is file locking, which is practically always
enabled and does a 'select BKL' instead. This effectively forces
CONFIG_BKL to be enabled until we have solved the fs/lockd
mess and can apply the patch that removes the BKL from fs/locks.c.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-10-21 15:44:13 +02:00
Eric Dumazet e83726b046 l2tp: small cleanup
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 04:39:09 -07:00
Julian Anastasov b0aeef3043 nf_nat: restrict ICMP translation for embedded header
Skip ICMP translation of embedded protocol header
if NAT bits are not set. Needed for IPVS to see the original
embedded addresses because for IPVS traffic the IPS_SRC_NAT_BIT
and IPS_DST_NAT_BIT bits are not set. It happens when IPVS performs
DNAT for client packets after using nf_conntrack_alter_reply
to expect replies from real server.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21 13:30:02 +02:00
Oliver Hartkopp 1e55659ce6 can-raw: add msg_flags to distinguish local traffic
CAN has no addressing scheme. It is currently impossible for userspace
to tell is a received CAN frame comes from another process on the local
host, or from a remote CAN device.

This patch add support for userspace applications to distinguish between
'own', 'local' and 'remote' CAN traffic. The distinction is made by returning
flags in msg->msg_flags in the call to recvmsg().

The added documentation explains the introduced flags.

Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 04:27:03 -07:00
stephen hemminger 32a875adcd 9p: client code cleanup
Make p9_client_version static since only used in one file.
Remove p9_client_auth because it is defined but never used.
Compile tested only.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 04:26:39 -07:00
stephen hemminger ff51bf8415 rds: make local functions/variables static
The RDS protocol has lots of functions that should be
declared static. rds_message_get/add_version_extension is
removed since it defined but never used.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 04:26:39 -07:00
stephen hemminger d0c2b0d265 napi: unexport napi_reuse_skb
The function napi_reuse_skb is only used inside core.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 04:26:38 -07:00
Allan Stephens a0e00369f1 tipc: delete needless memset from bearer enabling.
Eliminates zeroing out of the new bearer structure at the start of
activation, since it is already in that state.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 04:25:51 -07:00
Benjamin Poirier 1e253c3b8a bridge: Forward reserved group addresses if !STP
Make all frames sent to reserved group MAC addresses (01:80:c2:00:00:00 to
01:80:c2:00:00:0f) be forwarded if STP is disabled. This enables
forwarding EAPOL frames, among other things.

Signed-off-by: Benjamin Poirier <benjamin.poirier@polymtl.ca>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 04:25:48 -07:00
Tejun Heo a5c30b349b net/neighbour: cancel_delayed_work() + flush_scheduled_work() -> cancel_delayed_work_sync()
flush_scheduled_work() is going away.  Prepare for it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 04:25:48 -07:00
Neil Horman db5a753bf1 Revert d88dca79d3
TIPC needs to have its endianess issues fixed.  Unfortunately, the format of a
subscriber message is passed in directly from user space, so requiring this
message to be in network byte order breaks user space ABI.  Revert this change
until such time as we can determine how to do this in a backwards compatible
manner.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 04:11:08 -07:00
Neil Horman 8c97443808 Revert c6537d6742
Backout the tipc changes to the flags int he subscription message.  These
changees, while reasonable on the surface, interefere with user space ABI
compatibility which is a no-no.  This was part of the changes to fix the
endianess issues in the TIPC protocol, which would be really nice to do but we
need to do so in a way that is backwards compatible with user space.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 04:11:07 -07:00
Balazs Scheidler 093d282321 tproxy: fix hash locking issue when using port redirection in __inet_inherit_port()
When __inet_inherit_port() is called on a tproxy connection the wrong locks are
held for the inet_bind_bucket it is added to. __inet_inherit_port() made an
implicit assumption that the listener's port number (and thus its bind bucket).
Unfortunately, if you're using the TPROXY target to redirect skbs to a
transparent proxy that assumption is not true anymore and things break.

This patch adds code to __inet_inherit_port() so that it can handle this case
by looking up or creating a new bind bucket for the child socket and updates
callers of __inet_inherit_port() to gracefully handle __inet_inherit_port()
failing.

Reported by and original patch from Stephen Buck <stephen.buck@exinda.com>.
See http://marc.info/?t=128169268200001&r=1&w=2 for the original discussion.

Signed-off-by: KOVACS Krisztian <hidden@balabit.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-21 13:06:43 +02:00
Ben Greear d2ed817766 net/core: Allow tagged VLAN packets to flow through VETH devices.
When there are VLANs on a VETH device, the packets being transmitted
through the VETH device may be 4 bytes bigger than MTU.  A check
in dev_forward_skb did not take this into account and so dropped
these packets.

This patch is needed at least as far back as 2.6.34.7 and should
be considered for -stable.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 04:06:29 -07:00
Balazs Scheidler 6006db84a9 tproxy: add lookup type checks for UDP in nf_tproxy_get_sock_v4()
Also, inline this function as the lookup_type is always a literal
and inlining removes branches performed at runtime.

Signed-off-by: Balazs Scheidler <bazsi@balabit.hu>
Signed-off-by: KOVACS Krisztian <hidden@balabit.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-21 12:47:34 +02:00
Balazs Scheidler 106e4c26b1 tproxy: kick out TIME_WAIT sockets in case a new connection comes in with the same tuple
Without tproxy redirections an incoming SYN kicks out conflicting
TIME_WAIT sockets, in order to handle clients that reuse ports
within the TIME_WAIT period.

The same mechanism didn't work in case TProxy is involved in finding
the proper socket, as the time_wait processing code looked up the
listening socket assuming that the listener addr/port matches those
of the established connection.

This is not the case with TProxy as the listener addr/port is possibly
changed with the tproxy rule.

Signed-off-by: Balazs Scheidler <bazsi@balabit.hu>
Signed-off-by: KOVACS Krisztian <hidden@balabit.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-21 12:45:14 +02:00
Changli Gao 3511c9132f net_sched: remove the unused parameter of qdisc_create_dflt()
The first parameter dev isn't in use in qdisc_create_dflt().

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Acked-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 03:09:47 -07:00
stephen hemminger 1c4c40c42d xfrm: make xfrm_bundle_ok local
Only used in one place.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 03:09:46 -07:00
stephen hemminger 8d8a0b1cc2 rtnetlink: remove rtnl_kill_links
The function rtnl_kill_links is defined but never used.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 03:09:45 -07:00
stephen hemminger 6f747aca5e xfrm6: make xfrm6_tunnel_free_spi local
Function only defined and used in one file.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 03:09:45 -07:00
stephen hemminger d028023281 bridge: make br_parse_ip_options static
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 03:09:42 -07:00
stephen hemminger 11165f1457 socket: localize functions
A couple of functions in socket.c are only used there and
should be localized.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 03:09:42 -07:00
Eric Dumazet 9b0c290e78 fib: introduce fib_alias_accessed() helper
Perf tools session at NFWS 2010 pointed out a false sharing on struct
fib_alias that can be avoided pretty easily, if we set FA_S_ACCESSED bit
only if needed (ie : not already set)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 03:09:41 -07:00
Eric Dumazet 7b5edbc4cf net/sched: fix missing spinlock init
Under network load, doing :

tc qdisc del dev eth0 root

triggers :

[  167.193087] BUG: spinlock bad magic on CPU#3, udpflood/4928
[  167.193139]  lock: c15bc324, .magic: 00000000, .owner:
<none>/-1, .owner_cpu: -1
[  167.193193] Pid: 4928, comm: udpflood Not tainted
2.6.36-rc7-11417-g215340c-dirty #323
[  167.193245] Call Trace:
[  167.193292]  [<c13abaa0>] ? printk+0x18/0x20
[  167.193342]  [<c11afb53>] spin_bug+0xa3/0xf0
[  167.193389]  [<c11afcdd>] do_raw_spin_lock+0x7d/0x160
[  167.193440]  [<c1313d4e>] ? __dev_xmit_skb+0x27e/0x2b0
[  167.193496]  [<c107382b>] ? trace_hardirqs_on+0xb/0x10
[  167.193545]  [<c13ae99a>] _raw_spin_lock+0x3a/0x40
[  167.193593]  [<c1313d4e>] ? __dev_xmit_skb+0x27e/0x2b0
[  167.193641]  [<c1313d4e>] __dev_xmit_skb+0x27e/0x2b0

commit 79640a4ca6 (add additional lock to qdisc to increase
throughput) forgot to initialize  noop_qdisc and noqueue_qdisc busylock

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 03:09:40 -07:00
Julian Anastasov 0d79641a96 ipvs: provide address family for debugging
As skb->protocol is not valid in LOCAL_OUT add
parameter for address family in packet debugging functions.
Even if ports are not present in AH and ESP change them to
use ip_vs_tcpudp_debug_packet to show at least valid addresses
as before. This patch removes the last user of skb->protocol
in IPVS.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21 11:04:43 +02:00
Julian Anastasov 3233759be7 ipvs: inherit forwarding method in backup
Connections in backup server should inherit the
forwarding method from real server. It is a way to fix a
problem where the forwarding method in backup connection
is damaged by logical OR operation with the real server's
connection flags. And the change is needed for setups
where the backup server uses different forwarding method
for the same real servers.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21 11:04:30 +02:00
Julian Anastasov cb59155f21 ipvs: changes for local client
This patch deals with local client processing.

	Prefer LOCAL_OUT hook for scheduling connections from
local clients. LOCAL_IN is still supported if the packets are
not marked as processed in LOCAL_OUT. The idea to process
requests in LOCAL_OUT is to alter conntrack reply before
it is confirmed at POST_ROUTING. If the local requests are
processed in LOCAL_IN the conntrack can not be updated
and matching by state is impossible.

	Add the following handlers:

- ip_vs_reply[46] at LOCAL_IN:99 to process replies from
remote real servers to local clients. Now when both
replies from remote real servers (ip_vs_reply*) and
local real servers (ip_vs_local_reply*) are handled
it is safe to remove the conn_out_get call from ip_vs_in
because it does not support related ICMP packets.

- ip_vs_local_request[46] at LOCAL_OUT:-98 to process
requests from local client

	Handling in LOCAL_OUT causes some changes:

- as skb->dev, skb->protocol and skb->pkt_type are not defined
in LOCAL_OUT make sure we set skb->dev before calling icmpv6_send,
prefer skb_dst(skb) for struct net and remove the skb->protocol
checks from TUN transmitters.

[ horms@verge.net.au: removed trailing whitespace ]
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21 11:04:01 +02:00
Julian Anastasov fc60476761 ipvs: changes for local real server
This patch deals with local real servers:

- Add support for DNAT to local address (different real server port).
It needs ip_vs_out hook in LOCAL_OUT for both families because
skb->protocol is not set for locally generated packets and can not
be used to set 'af'.

- Skip packets in ip_vs_in marked with skb->ipvs_property because
ip_vs_out processing can be executed in LOCAL_OUT but we still
have the conn_out_get check in ip_vs_in.

- Ignore packets with inet->nodefrag from local stack

- Require skb_dst(skb) != NULL because we use it to get struct net

- Add support for changing the route to local IPv4 stack after DNAT
depending on the source address type. Local client sets output
route and the remote client sets input route. It looks like
IPv6 does not need such rerouting because the replies use
addresses from initial incoming header, not from skb route.

- All transmitters now have strict checks for the destination
address type: redirect from non-local address to local real
server requires NAT method, local address can not be used as
source address when talking to remote real server.

- Now LOCALNODE is not set explicitly as forwarding
method in real server to allow the connections to provide
correct forwarding method to the backup server. Not sure if
this breaks tools that expect to see 'Local' real server type.
If needed, this can be supported with new flag IP_VS_DEST_F_LOCAL.
Now it should be possible connections in backup that lost
their fwmark information during sync to be forwarded properly
to their daddr, even if it is local address in the backup server.
By this way backup could be used as real server for DR or TUN,
for NAT there are some restrictions because tuple collisions
in conntracks can create problems for the traffic.

- Call ip_vs_dst_reset when destination is updated in case
some real server IP type is changed between local and remote.

[ horms@verge.net.au: removed trailing whitespace ]
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21 11:03:46 +02:00
Julian Anastasov f5a41847ac ipvs: move ip_route_me_harder for ICMP
Currently, ip_route_me_harder after ip_vs_out_icmp
is called even if packet is not related to IPVS connection.
Move it into handle_response_icmp. Also, force rerouting
if sending to local client because IPv4 stack uses addresses
from the route.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21 10:51:43 +02:00
Julian Anastasov 1ca5bb5450 ipvs: create ip_vs_defrag_user
Create new function ip_vs_defrag_user to return correct
IP_DEFRAG_xxx user depending on the hooknum. It will be needed
when we add handlers in LOCAL_OUT.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21 10:51:28 +02:00
Julian Anastasov 4256f1aaa6 ipvs: fix CHECKSUM_PARTIAL for TUN method
The recent change in IP_VS_XMIT_TUNNEL to set
CHECKSUM_NONE is not correct. After adding IPIP header
skb->csum becomes invalid but the CHECKSUM_PARTIAL
case must be supported. So, use skb_forward_csum() which is
most suitable for us to allow local clients to send IPIP
to remote real server.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21 10:51:11 +02:00
Julian Anastasov 489fdedaed ipvs: stop ICMP from FORWARD to local
Delivering locally ICMP from FORWARD hook is not supported.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21 10:50:57 +02:00
Julian Anastasov 190ecd27cd ipvs: do not schedule conns from real servers
This patch is needed to avoid scheduling of
packets from local real server when we add ip_vs_in
in LOCAL_OUT hook to support local client.

 	Currently, when ip_vs_in can not find existing
connection it tries to create new one by calling ip_vs_schedule.

 	The default indication from ip_vs_schedule was if
connection was scheduled to real server. If real server is
not available we try to use the bypass forwarding method
or to send ICMP error. But in some cases we do not want to use
the bypass feature. So, add flag 'ignored' to indicate if
the scheduler ignores this packet.

 	Make sure we do not create new connections from replies.
We can hit this problem for persistent services and local real
server when ip_vs_in is added to LOCAL_OUT hook to handle
local clients.

 	Also, make sure ip_vs_schedule ignores SYN packets
for Active FTP DATA from local real server. The FTP DATA
connection should be created on SYN+ACK from client to assign
correct connection daddr.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21 10:50:41 +02:00
Julian Anastasov cf356d69db ipvs: switch to notrack mode
Change skb->ipvs_property semantic. This is preparation
to support ip_vs_out processing in LOCAL_OUT. ipvs_property=1
will be used to avoid expensive lookups for traffic sent by
transmitters. Now when conntrack support is not used we call
ip_vs_notrack method to avoid problems in OUTPUT and
POST_ROUTING hooks instead of exiting POST_ROUTING as before.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21 10:50:20 +02:00
Julian Anastasov 8b27b10f58 ipvs: optimize checksums for apps
Avoid full checksum calculation for apps that can provide
info whether csum was broken after payload mangling. For now only
ip_vs_ftp mangles payload and it updates the csum, so the full
recalculation is avoided for all packets.

 	Add CHECKSUM_UNNECESSARY for snat_handler (TCP and UDP).
It is needed to support SNAT from local address for the case
when csum is fully recalculated.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21 10:50:02 +02:00
Julian Anastasov 5bc9068e9d ipvs: fix CHECKSUM_PARTIAL for TCP, UDP
Fix CHECKSUM_PARTIAL handling. Tested for IPv4 TCP,
UDP not tested because it needs network card with HW CSUM support.
May be fixes problem where IPVS can not be used in virtual boxes.
Problem appears with DNAT to local address when the local stack
sends reply in CHECKSUM_PARTIAL mode.

 	Fix tcp_dnat_handler and udp_dnat_handler to provide
vaddr and daddr in right order (old and new IP) when calling
tcp_partial_csum_update/udp_partial_csum_update (CHECKSUM_PARTIAL).

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21 10:49:39 +02:00
Jesse Gross 361ff8a6cf bridge: Add support for TX vlan offload.
If some of the underlying devices support it, enable vlan offload on
transmit for bridge devices.  This allows senders to take advantage of the
hardware support, similar to other forms of acceleration.

Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 01:26:54 -07:00
Jesse Gross d5dbda2380 ethtool: Add support for vlan accleration.
Now that vlan acceleration is handled consistently regardless of usage,
it is possible to enable and disable it at will.  This adds support for
Ethtool operations that change the offloading status for debugging
purposes, similar to other forms of hardware acceleration.

Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 01:26:54 -07:00
Jesse Gross 3701e51382 vlan: Centralize handling of hardware acceleration.
Currently each driver that is capable of vlan hardware acceleration
must be aware of the vlan groups that are configured and then pass
the stripped tag to a specialized receive function.  This is

different from other types of hardware offload in that it places a
significant amount of knowledge in the driver itself rather keeping
it in the networking core.

This makes vlan offloading function more similarly to other forms
of offloading (such as checksum offloading or TSO) by doing the
following:
* On receive, stripped vlans are passed directly to the network
core, without attempting to check for vlan groups or reconstructing
the header if no group
* vlans are made less special by folding the logic into the main
receive routines
* On transmit, the device layer will add the vlan header in software
if the hardware doesn't support it, instead of spreading that logic
out in upper layers, such as bonding.

There are a number of advantages to this:
* Fixes all bugs with drivers incorrectly dropping vlan headers at once.
* Avoids having to disable VLAN acceleration when in promiscuous mode
(good for bridging since it always puts devices in promiscuous mode).
* Keeps VLAN tag separate until given to ultimate consumer, which
avoids needing to do header reconstruction as in tg3 unless absolutely
necessary.
* Consolidates common code in core networking.

Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 01:26:53 -07:00
Jesse Gross 65ac6a5fa6 vlan: Avoid hash table lookup to find group.
A struct net_device always maps to zero or one vlan groups and we
always know the device when we are looking up a group.  We currently
do a hash table lookup on the device to find the group but it is
much simpler to just store a pointer.

Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 01:26:53 -07:00
Jesse Gross 7b9c609037 vlan: Enable software emulation for vlan accleration.
Currently users of hardware vlan accleration need to know whether
the device supports it before generating packets.  However, vlan
acceleration will soon be available in a more flexible manner so
knowing ahead of time becomes much more difficult.  This adds
a software fallback path for vlan packets on devices without the
necessary offloading support, similar to other types of hardware
accleration.

Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 01:26:52 -07:00
Jesse Gross b738127dfb vlan: Rename VLAN_GROUP_ARRAY_LEN to VLAN_N_VID.
VLAN_GROUP_ARRAY_LEN is simply the number of possible vlan VIDs.
Since vlan groups will soon be more of an implementation detail
for vlan devices, rename the constant to be descriptive of its
actual purpose.

Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 01:26:50 -07:00
Jesse Gross 13937911f9 ebtables: Allow filtering of hardware accelerated vlan frames.
An upcoming commit will allow packets with hardware vlan acceleration
information to be passed though more parts of the network stack, including
packets trunked through the bridge.  This adds support for matching and
filtering those packets through ebtables.

Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 01:26:49 -07:00
David S. Miller 4993e0d211 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-2.6 2010-10-21 00:54:29 -07:00
Eric Paris ff660c80d0 secmark: fix config problem when CONFIG_NF_CONNTRACK_SECMARK is not set
When CONFIG_NF_CONNTRACK_SECMARK is not set we accidentally attempt to use
the secmark fielf of struct nf_conn.  Problem is when that config isn't set
the field doesn't exist.  whoops.  Wrap the incorrect usage in the config.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-10-21 10:13:00 +11:00
Eric Paris 1ae4de0cdf secmark: export secctx, drop secmark in procfs
The current secmark code exports a secmark= field which just indicates if
there is special labeling on a packet or not.  We drop this field as it
isn't particularly useful and instead export a new field secctx= which is
the actual human readable text label.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: James Morris <jmorris@namei.org>
2010-10-21 10:12:52 +11:00
Eric Paris 1cc63249ad conntrack: export lsm context rather than internal secid via netlink
The conntrack code can export the internal secid to userspace.  These are
dynamic, can change on lsm changes, and have no meaning in userspace.  We
should instead be sending lsm contexts to userspace instead.  This patch sends
the secctx (rather than secid) to userspace over the netlink socket.  We use a
new field CTA_SECCTX and stop using the the old CTA_SECMARK field since it did
not send particularly useful information.

Signed-off-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Paul Moore <paul.moore@hp.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: James Morris <jmorris@namei.org>
2010-10-21 10:12:51 +11:00
Eric Paris 2606fd1fa5 secmark: make secmark object handling generic
Right now secmark has lots of direct selinux calls.  Use all LSM calls and
remove all SELinux specific knowledge.  The only SELinux specific knowledge
we leave is the mode.  The only point is to make sure that other LSMs at
least test this generic code before they assume it works.  (They may also
have to make changes if they do not represent labels as strings)

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Paul Moore <paul.moore@hp.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: James Morris <jmorris@namei.org>
2010-10-21 10:12:48 +11:00
Eric Paris 15714f7b58 secmark: do not return early if there was no error
Commit 4a5a5c73 attempted to pass decent error messages back to userspace for
netfilter errors.  In xt_SECMARK.c however the patch screwed up and returned
on 0 (aka no error) early and didn't finish setting up secmark.  This results
in a kernel BUG if you use SECMARK.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-10-21 10:12:47 +11:00
Sage Weil 240634e9b3 ceph: fix num_pages_free accounting in pagelist
Decrement the free page counter when removing a page from the free_list.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20 15:38:23 -07:00
Yehuda Sadeh 010e3b48fc ceph: don't crash when passed bad mount options
This only happened when parse_extra_token was not passed
to ceph_parse_option() (hence, only happened in rbd).

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2010-10-20 15:38:22 -07:00
Greg Farnum ac0b74d8a1 ceph: add pagelist_reserve, pagelist_truncate, pagelist_set_cursor
These facilitate preallocation of pages so that we can encode into the pagelist
in an atomic context.

Signed-off-by: Greg Farnum <gregf@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20 15:38:16 -07:00
Yehuda Sadeh 602adf4002 rbd: introduce rados block device (rbd), based on libceph
The rados block device (rbd), based on osdblk, creates a block device
that is backed by objects stored in the Ceph distributed object storage
cluster.  Each device consists of a single metadata object and data
striped over many data objects.

The rbd driver supports read-only snapshots.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20 15:38:13 -07:00
Yehuda Sadeh 3d14c5d2b6 ceph: factor out libceph from Ceph file system
This factors out protocol and low-level storage parts of ceph into a
separate libceph module living in net/ceph and include/linux/ceph.  This
is mostly a matter of moving files around.  However, a few key pieces
of the interface change as well:

 - ceph_client becomes ceph_fs_client and ceph_client, where the latter
   captures the mon and osd clients, and the fs_client gets the mds client
   and file system specific pieces.
 - Mount option parsing and debugfs setup is correspondingly broken into
   two pieces.
 - The mon client gets a generic handler callback for otherwise unknown
   messages (mds map, in this case).
 - The basic supported/required feature bits can be expanded (and are by
   ceph_fs_client).

No functional change, aside from some subtle error handling cases that got
cleaned up in the refactoring process.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20 15:37:28 -07:00
Eric Dumazet 27b75c95f1 net: avoid RCU for NOCACHE dst
There is no point using RCU for dst we allocate for a very short time
(used once).

Change dst_release() to take DST_NOCACHE into account, but also change
skb_dst_set_noref() to force a refcount increment for such dst.

This is a _huge_ gain, because we dont waste memory to store xx thousand
of dsts. Instead of queueing them to RCU, we can free them instantly.

CPU caches can stay hot, re-using same memory blocks to hold temporary
dsts.

Note : remove unneeded smp_mb__before_atomic_dec(); in dst_release(),
since atomic_dec_return() implies a full memory barrier.

Stress test, 160.000.000 udp frames sent, IP route cache disabled
(DDOS).

Before:

real    0m38.091s
user    0m13.189s
sys     7m53.018s

After:

real	0m29.946s
user	0m12.157s
sys	7m40.605s

For reference, if IP route cache was enabled :

real	0m32.030s
user	0m10.521s
sys	8m15.243s

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-20 03:02:23 -07:00
Tom Herbert e6484930d7 net: allocate tx queues in register_netdevice
This patch introduces netif_alloc_netdev_queues which is called from
register_device instead of alloc_netdev_mq.  This makes TX queue
allocation symmetric with RX allocation.  Also, queue locks allocation
is done in netdev_init_one_queue.  Change set_real_num_tx_queues to
fail if requested number < 1 or greater than number of allocated
queues.

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-20 02:27:59 -07:00
Tom Herbert bd25fa7ba5 net: cleanups in RX queue allocation
Clean up in RX queue allocation.  In netif_set_real_num_rx_queues
return error on attempt to set zero queues, or requested number is
greater than number of allocated queues.  In netif_alloc_rx_queues,
do BUG_ON if queue_count is zero.

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-20 02:27:59 -07:00
Tom Herbert 55513fb428 net: fail alloc_netdev_mq if queue count < 1
In alloc_netdev_mq fail if requested queue_count < 1.

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-20 02:27:58 -07:00
David S. Miller 5eeaa2db16 Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 2010-10-20 01:59:48 -07:00
Changli Gao c5e90f5620 phonet: remove the unused variable pn
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-20 01:55:54 -07:00
Neil Horman f13d493d9c netpoll: Revert napi_poll fix for bonding driver
In an erlier patch I modified napi_poll so that devices with IFF_MASTER polled
the per_cpu list instead of the device list for napi.  I did this because the
bonding driver has no napi instances to poll, it instead expects to check the
slave devices napi instances, which napi_poll was unaware of.  Looking at this
more closely however, I now see this isn't strictly needed.  As the bond driver
poll_controller calls the slaves poll_controller via netpoll_poll_dev, which
recursively calls poll_napi on each slave, allowing those napi instances to get
serviced.  The earlier patch isn't at all harmfull, its just not needed, so lets
revert it to make the code cleaner.  Sorry for the noise,

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: WANG Cong <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-20 01:44:30 -07:00
Eduardo Blanco d86bef73b4 Fixed race condition at ip_vs.ko module init.
Lists were initialized after the module was registered.  Multiple ipvsadm
processes at module load triggered a race condition that resulted in a null
pointer dereference in do_ip_vs_get_ctl(). As a result, __ip_vs_mutex
was left locked preventing all further ipvsadm commands.

Signed-off-by: Eduardo J. Blanco <ejblanco@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-19 17:13:16 +02:00
Pavel Emelyanov 8f3a6de313 sunrpc: Turn list_for_each-s into the ..._entry-s
Saves some lines of code and some branticks when reading one.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-19 10:48:16 -04:00
Pavel Emelyanov 50fa0d40a9 sunrpc: Remove dead "else" branch from bc xprt creation
Since the xprt in question is forcibly set to be bound the else
branch of this check is unneeded.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-19 10:48:16 -04:00
Pavel Emelyanov c636b572e0 sunrpc: Don't return NULL from rpcb_create
> The reason for this is in the future, we may want to support additional
> address family types.  We should, therefore, ensure that every piece of
> code that is sensitive to address families fail in some orderly manner
> to let developers know where a change is needed.

Makes sense. I was under impression, that AF-s other than INET are not
cared about at all :(

Here's a fixed version of the patch.

Log:

Its callers check for ERR_PTR.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-19 10:48:16 -04:00
Pavel Emelyanov f10fef38d2 sunrpc: Remove useless if (task == NULL) from xprt_reserve_xprt
The task in question is dereferenced above (and is actually never NULL).

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-19 10:48:16 -04:00
Pavel Emelyanov 8c14ff2aaf sunrpc: Remove UDP worker wrappers
Same for UDP sockets creation paths.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-19 10:48:15 -04:00
Pavel Emelyanov cdd518d524 sunrpc: Remove TCP worker wrappers
The v4 and the v6 wrappers only pass the respective family
to the xs_tcp_setup_socket. This family can be taken from the
xprt's sockaddr.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-19 10:48:15 -04:00
Pavel Emelyanov 7dfe1fc362 sunrpc: Pass family to setup_socket calls
Now we have a single socket creation routine and can call it
directly from the setup_socket routines.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-19 10:48:15 -04:00
Pavel Emelyanov 6bc9638ab4 sunrpc: Merge xs_create_sock code
After xs_bind is merged it's easy to merge its callers.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
[bfields@redhat.com: fix address family initialization]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-19 10:48:15 -04:00
Pavel Emelyanov beb59b6828 sunrpc: Merge the xs_bind code
There's the only difference betseen the xs_bind4 and the
xs_bind6 - the size of sockaddr structure they use.

Fortunatelly its size can be indirectly get from the transport.

Change since v1:
* use sockaddr_storage instead of sockaddr
* use rpc_set_port instead of manual port assigning

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
[bfields@redhat.com: fix address family initialization]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-19 10:48:15 -04:00
Pavel Emelyanov 573018c07e sunrpc: Call xs_create_sockX directly from setup_socket
Remove now unneeded wrappers that just add type and protocol
to socket creation callback.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-19 10:48:15 -04:00
Pavel Emelyanov 22d44a7d8a sunrpc: Factor out v6 sockets creation
Same patch for v6 protocols.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-19 10:48:15 -04:00
Pavel Emelyanov 22f793268d sunrpc: Factor out v4 sockets creation
The UDPv4 and TCPv4 socket creation callbacks now look very similar.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-19 10:48:14 -04:00
Pavel Emelyanov b65c031061 sunrpc: Factor out udp sockets creation
Make it look like the TCP sockets creation.
Unfortunately the git diff made the patch look messy :(

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-19 10:48:14 -04:00
Pavel Emelyanov 58dddac9c5 sunrpc: Remove duplicate xprt/transport arguments from calls
The xs_tcp_reuse_connection takes the xprt only to pass it down
to the xs_abort_connection. The later one can get it from the given
transport itself.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-19 10:48:14 -04:00
Pavel Emelyanov a9f5f0f7bf sunrpc: Get xprt pointer once in xs_tcp_setup_socket
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-19 10:48:14 -04:00
Pavel Emelyanov baaf4e487a sunrpc: Remove unused sock arg from xs_next_srcport
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-19 10:48:14 -04:00
Pavel Emelyanov 5d4ec93297 sunrpc: Remove unused sock arg from xs_get_srcport
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-19 10:48:14 -04:00
Eric Dumazet 8723e1b4ad inet: RCU changes in inetdev_by_index()
Convert inetdev_by_index() to not increment in_dev refcount.

Callers hold RCU or RTNL, and should not decrement in_dev refcount.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-19 03:50:48 -07:00
Eric Dumazet 9e917dca74 net: avoid a dev refcount in ip_mc_find_dev()
We hold RTNL in ip_mc_find_dev(), no need to touch device refcount.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-19 03:50:47 -07:00
Arnd Bergmann a6f8dbc654 sunrpc: remove the big kernel lock
The sunrpc cache_ioctl function does not need the big kernel lock
because it uses its own queue_lock already.

rpc_pipe_ioctl apparently should be using i_lock like the other
operations on the pipe file descriptor do.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-10-19 11:29:59 +02:00
Hans Schillstrom 714f095f74 ipvs: IPv6 tunnel mode
IPv6 encapsulation uses a bad source address for the tunnel.
i.e. VIP will be used as local-addr and encap. dst addr.
Decapsulation will not accept this.

Example
LVS (eth1 2003::2:0:1/96, VIP 2003::2:0:100)
   (eth0 2003::1:0:1/96)
RS  (ethX 2003::1:0:5/96)

tcpdump
2003::2:0:100 > 2003::1:0:5: IP6 (hlim 63, next-header TCP (6) payload length: 40)  2003::3:0:10.50991 > 2003::2:0:100.http: Flags [S], cksum 0x7312 (correct), seq 3006460279, win 5760, options [mss 1440,sackOK,TS val 1904932 ecr 0,nop,wscale 3], length 0

In Linux IPv6 impl. you can't have a tunnel with an any cast address
receiving packets (I have not tried to interpret RFC 2473)
To have receive capabilities the tunnel must have:
 - Local address set as multicast addr or an unicast addr
 - Remote address set as an unicast addr.
 - Loop back addres or Link local address are not allowed.

This causes us to setup a tunnel in the Real Server with the
LVS as the remote address, here you can't use the VIP address since it's
used inside the tunnel.

Solution
Use outgoing interface IPv6 address (match against the destination).
i.e. use ip6_route_output() to look up the route cache and
then use ipv6_dev_get_saddr(...) to set the source address of the
encapsulated packet.

Additionally, cache the results in new destination
fields: dst_cookie and dst_saddr and properly check the
returned dst from ip6_route_output. We now add xfrm_lookup
call only for the tunneling method where the source address
is a local one.

Signed-off-by:Hans Schillstrom <hans.schillstrom@ericsson.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-19 10:38:48 +02:00
Pablo Neira Ayuso ebbf41df4a netfilter: ctnetlink: add expectation deletion events
This patch allows to listen to events that inform about
expectations destroyed.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-19 10:19:06 +02:00
Tom Tucker 4a84386fc2 svcrdma: Cleanup DMA unmapping in error paths.
There are several error paths in the code that do not unmap DMA. This
patch adds calls to svc_rdma_unmap_dma to free these DMA contexts.

Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-18 19:51:32 -04:00
Tom Tucker b432e6b3d9 svcrdma: Change DMA mapping logic to avoid the page_address kernel API
There was logic in the send path that assumed that a page containing data
to send to the client has a KVA. This is not always the case and can result
in data corruption when page_address returns zero and we end up DMA mapping
zero.

This patch changes the bus mapping logic to avoid page_address() where
necessary and converts all calls from ib_dma_map_single to ib_dma_map_page
in order to keep the map/unmap calls symmetric.

Signed-off-by: Tom Tucker <tom@ogc.us>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-18 19:51:31 -04:00
Venkatesh Pallipadi 75e1056f5c sched: Fix softirq time accounting
Peter Zijlstra found a bug in the way softirq time is accounted in
VIRT_CPU_ACCOUNTING on this thread:

   http://lkml.indiana.edu/hypermail//linux/kernel/1009.2/01366.html

The problem is, softirq processing uses local_bh_disable internally. There
is no way, later in the flow, to differentiate between whether softirq is
being processed or is it just that bh has been disabled. So, a hardirq when bh
is disabled results in time being wrongly accounted as softirq.

Looking at the code a bit more, the problem exists in !VIRT_CPU_ACCOUNTING
as well. As account_system_time() in normal tick based accouting also uses
softirq_count, which will be set even when not in softirq with bh disabled.

Peter also suggested solution of using 2*SOFTIRQ_OFFSET as irq count
for local_bh_{disable,enable} and using just SOFTIRQ_OFFSET while softirq
processing. The patch below does that and adds API in_serving_softirq() which
returns whether we are currently processing softirq or not.

Also changes one of the usages of softirq_count in net/sched/cls_cgroup.c
to in_serving_softirq.

Looks like many usages of in_softirq really want in_serving_softirq. Those
changes can be made individually on a case by case basis.

Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1286237003-12406-2-git-send-email-venki@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-18 20:52:20 +02:00
Neil Horman 990c3d6f9c bonding: Fix napi poll for bonding driver
Usually the netpoll path, when preforming a napi poll can get away with just
polling all the napi instances of the configured device.  Thats not the case for
the bonding driver however, as the napi instances which may wind up getting
flagged as needing polling after the poll_controller call don't belong to the
bonded device, but rather to the slave devices.  Fix this by checking the device
in question for the IFF_MASTER flag, if set, we know we need to check the full
poll list for this cpu, rather than just the devices napi instance list.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18 08:32:08 -07:00
Neil Horman c2355e1ab9 bonding: Fix bonding drivers improper modification of netpoll structure
The bonding driver currently modifies the netpoll structure in its xmit path
while sending frames from netpoll.  This is racy, as other cpus can access the
netpoll structure in parallel. Since the bonding driver points np->dev to a
slave device, other cpus can inadvertently attempt to send data directly to
slave devices, leading to improper locking with the bonding master, lost frames,
and deadlocks.  This patch fixes that up.

This patch also removes the real_dev pointer from the netpoll structure as that
data is really only used by bonding in the poll_controller, and we can emulate
its behavior by check each slave for IS_UP.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18 08:32:07 -07:00
Andy Walls 27a954bd56 IPv4: route.c: Change checks against 0xffffffff to ipv4_is_lbcast()
Change a few checks against the hardcoded broadcast address,
0xffffffff, to ipv4_is_lbcast().  Remove some existing checks
using ipv4_is_lbcast() that are now obviously superfluous.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18 07:22:50 -07:00
Randy Dunlap 76b6717bc6 netfilter: fix kconfig unmet dependency warning
Fix netfilter kconfig unmet dependencies warning & spell out
"compatible" while there.

warning: (IP_NF_TARGET_TTL && NET && INET && NETFILTER && IP_NF_IPTABLES && NETFILTER_ADVANCED || IP6_NF_TARGET_HL && NET && INET && IPV6 && NETFILTER && IP6_NF_IPTABLES && NETFILTER_ADVANCED) selects NETFILTER_XT_TARGET_HL which has unmet direct dependencies ((IP_NF_MANGLE || IP6_NF_MANGLE) && NETFILTER_ADVANCED)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-18 11:13:30 +02:00
Justin P. Mattock 631dd1a885 Update broken web addresses in the kernel.
The patch below updates broken web addresses in the kernel

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Acked-by: Ben Pfaff <blp@cs.stanford.edu>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Reviewed-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-18 11:03:14 +02:00
Allan Stephens ccc901ee58 tipc: Simplify bearer shutdown logic
Optimize processing in TIPC's bearer shutdown code, including:

1. Remove an unnecessary check to see if TIPC bearer's can exist.
2. Don't release spinlocks before calling a media-specific disabling
routine, since the routine can't sleep.
3. Make bearer_disable() operate directly on a struct bearer, instead
of needlessly taking a name and then mapping that to the struct.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Reviewed-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18 01:50:49 -07:00
David S. Miller 724829b3ad tipc: Kill tipc_get_mode() completely.
It's completely unused and exporting a static symbol
makes no sense and breaks the build.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18 01:06:20 -07:00
Nathan Holstein d793fe8caa Bluetooth: fix oops in l2cap_connect_req
In error cases when the ACL is insecure or we fail to allocate a new
struct sock, we jump to the "response" label.  If so, "sk" will be
null and the kernel crashes.

Signed-off-by: Nathan Holstein <nathan.holstein@gmail.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-17 21:19:19 -02:00
Eric Dumazet 19f572565e fib_hash: RCU conversion phase 2
Get rid of fib_hash_lock rwlock.

The fn_zone hash table resize is the noticeable part of this patch.

I added a seqlock per fn_zone, so that readers can restart their lookup
in the (very rare) case a writer expanded the hash table.

Add rcu heads in fib_alias and fib_node, use call_rcu() to defer their
freeing, and use appropriate _rcu list manipulations.

Stress test (160.000.000 udp frames sent, IP route cache disabled to
mimic DDOS attack, FIB_HASH)

Before:
real	0m41.191s
user	0m13.137s
sys	8m55.241s

After:
real	0m38.091s
user	0m13.189s
sys	7m53.018s

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17 13:53:16 -07:00
Eric Dumazet 117a8cdea3 fib_hash: RCU conversion phase 1
First step for RCU conversion of fib_hash :

struct fn_zone are created and never deleted.

Very classic conversion, using rcu_assign_pointer(), rcu_dereference()
and rtnl_dereference() verbs.

__rcu markers on fz_next and fn_zone_list

They are created under RTNL, we dont need fib_hash_lock anymore in
fn_new_zone().

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17 13:53:15 -07:00
Eric Dumazet 9bef83edfb fib_hash: embed initial hash table in fn_zone
While looking for false sharing problems, I noticed
sizeof(struct fn_zone) was small (28 bytes) and possibly sharing a cache
line with an often written kernel structure.

Most of the time, fn_zone uses its initial hash table of 16 slots.

We can avoid the false sharing problem by embedding this initial hash
table in fn_zone itself, so that sizeof(fn_zone) > L1_CACHE_BYTES

We did a similar optimization in commit a6501e080c (Reduce memory needs
and speedup lookups)

Add a fz_revorder field to speedup fn_hash() a bit.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17 13:53:15 -07:00
Ilpo Järvinen c60ce4e265 tcp: use correct counters in CA_CWR state too
As CWR is stronger than CA_Disorder state, we can miscount
SACK/Reno failure into other timeouts. Not a bad problem as
it can happen only due to ECN, FRTO detecting spurious RTO
or xmit error which are the only callers of tcp_enter_cwr.
And even then losses and RTO must still follow thereafter
to actually end up into the relevant code paths.

Compile tested.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17 13:46:33 -07:00
Ilpo Järvinen 1fdb936101 tcp: sack lost marking fixes
When only fast rexmit should be done, tcp_mark_head_lost marks
L too far. Also, sacked_upto below 1 is perfectly valid number,
the packets == 0 then needs to be trapped elsewhere.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17 13:46:33 -07:00
stephen hemminger 31e3c3f6f1 tipc: cleanup function namespace
Do some cleanups of TIPC based on make namespacecheck
  1. Don't export unused symbols
  2. Eliminate dead code
  3. Make functions and variables local
  4. Rename buf_acquire to tipc_buf_acquire since it is used in several files

Compile tested only.
This make break out of tree kernel modules that depend on TIPC routines.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16 11:13:24 -07:00
Eric Dumazet 10da66f755 fib: avoid false sharing on fib_table_hash
While doing profile analysis, I found fib_hash_table was sometime in a
cache line shared by a possibly often written kernel structure.

(CONFIG_IP_ROUTE_MULTIPATH || !CONFIG_IPV6_MULTIPLE_TABLES)

It's hard to detect because not easily reproductible.

Make sure we allocate a full cache line to keep this shared in all cpus
caches.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16 11:13:23 -07:00
Eric Dumazet 874ffa8f72 fib_trie: use fls() instead of open coded loop
fib_table_lookup() might use fls() to speedup an open coded loop.

Noticed while doing a profile analysis.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16 11:13:22 -07:00
Eric Dumazet a0a4a85a15 fib: remove a useless synchronize_rcu() call
fib_nl_delrule() calls synchronize_rcu() for no apparent reason,
while rtnl is held.

I suspect it was done to avoid an atomic_inc_not_zero() in
fib_rules_lookup(), which commit 7fa7cb7109 added anyway.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16 11:13:22 -07:00
Eric Dumazet 2c1c00040a fib6: use FIB_LOOKUP_NOREF in fib6_rule_lookup()
Avoid two atomic ops on found rule in fib6_rule_lookup()

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16 11:13:21 -07:00
Eric Dumazet 564824b0c5 net: allocate skbs on local node
commit b30973f877 (node-aware skb allocation) spread a wrong habit of
allocating net drivers skbs on a given memory node : The one closest to
the NIC hardware. This is wrong because as soon as we try to scale
network stack, we need to use many cpus to handle traffic and hit
slub/slab management on cross-node allocations/frees when these cpus
have to alloc/free skbs bound to a central node.

skb allocated in RX path are ephemeral, they have a very short
lifetime : Extra cost to maintain NUMA affinity is too expensive. What
appeared as a nice idea four years ago is in fact a bad one.

In 2010, NIC hardwares are multiqueue, or we use RPS to spread the load,
and two 10Gb NIC might deliver more than 28 million packets per second,
needing all the available cpus.

Cost of cross-node handling in network and vm stacks outperforms the
small benefit hardware had when doing its DMA transfert in its 'local'
memory node at RX time. Even trying to differentiate the two allocations
done for one skb (the sk_buff on local node, the data part on NIC
hardware node) is not enough to bring good performance.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16 11:13:19 -07:00
John W. Linville c64557d666 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem 2010-10-15 16:11:56 -04:00
John W. Linville 1a63c353c8 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next-2.6 into for-davem 2010-10-15 16:00:02 -04:00
Johannes Berg 9ebad4ab87 radiotap: fix vendor namespace parsing
There's a bug with radiotap vendor namespace
parsing if you don't register for the given
namespace extensions. Fix this by passing
only the unknown vendor namespaces and the
registered data to frontends, but not both.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-15 15:57:34 -04:00
Linus Torvalds 799c10559d De-pessimize rds_page_copy_user
Don't try to "optimize" rds_page_copy_user() by using kmap_atomic() and
the unsafe atomic user mode accessor functions.  It's actually slower
than the straightforward code on any reasonable modern CPU.

Back when the code was written (although probably not by the time it was
actually merged, though), 32-bit x86 may have been the dominant
architecture.  And there kmap_atomic() can be a lot faster than kmap()
(unless you have very good locality, in which case the virtual address
caching by kmap() can overcome all the downsides).

But these days, x86-64 may not be more populous, but it's getting there
(and if you care about performance, it's definitely already there -
you'd have upgraded your CPU's already in the last few years).  And on
x86-64, the non-kmap_atomic() version is faster, simply because the code
is simpler and doesn't have the "re-try page fault" case.

People with old hardware are not likely to care about RDS anyway, and
the optimization for the 32-bit case is simply buggy, since it doesn't
verify the user addresses properly.

Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-15 11:09:28 -07:00
Arnd Bergmann 6038f373a3 llseek: automatically add .llseek fop
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.

The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.

New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time.  Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.

The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.

Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.

Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.

===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
//   but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}

@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}

@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
   *off = E
|
   *off += E
|
   func(..., off, ...)
|
   E = *off
)
...+>
}

@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}

@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
  *off = E
|
  *off += E
|
  func(..., off, ...)
|
  E = *off
)
...+>
}

@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}

@ fops0 @
identifier fops;
@@
struct file_operations fops = {
 ...
};

@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
 .llseek = llseek_f,
...
};

@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
 .read = read_f,
...
};

@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
 .write = write_f,
...
};

@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
 .open = open_f,
...
};

// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
...  .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};

@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
...  .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};

// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
...  .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};

// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};

// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};

@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+	.llseek = default_llseek, /* write accesses f_pos */
};

// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////

@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
 .write = write_f,
 .read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};

@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};

@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};

@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
2010-10-15 15:53:27 +02:00
Kumar Sanghvi b3d6255388 Phonet: 'connect' socket implementation for Pipe controller
Based on suggestion by Rémi Denis-Courmont to implement 'connect'
for Pipe controller logic,  this patch implements 'connect' socket
call for the Pipe controller logic.
The patch does following:-
- Removes setsockopts for PNPIPE_CREATE and PNPIPE_DESTROY
- Adds setsockopt for setting the Pipe handle value
- Implements connect socket call
- Updates the Pipe controller logic

User-space should now follow below sequence with Pipe controller:-
-socket
-bind
-setsockopt for PNPIPE_PIPE_HANDLE
-connect
-setsockopt for PNPIPE_ENCAP_IP
-setsockopt for PNPIPE_ENABLE

GPRS/3G data has been tested working fine with this.

Signed-off-by: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
Acked-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-13 14:40:34 -07:00
Paul Gortmaker 7368ddf144 tipc: clean out all instances of #if 0'd unused code
Remove all instances of legacy, or as yet to be implemented code
that is currently living within an #if 0 ... #endif block.
In the rare instance that some of it be needed in the future,
it can still be dragged out of history, but there is no need
for it to sit in mainline.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-13 14:27:34 -07:00
Johannes Berg e4b55957eb mac80211: fix SMPS request
It looks like I submitted a different patch
than I tested, because clearly the code in
mac80211 is missing actually propagating the
requested SMPS mode. Fix that!

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-13 15:45:23 -04:00
Johannes Berg 7be5086d4c mac80211: add probe request filter flag
Using the frame registration notification, we
can see when probe requests are requested and
notify the low-level driver via filtering. The
flag is also set in AP and IBSS modes.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-13 15:45:22 -04:00
Johannes Berg 271733cf84 cfg80211: notify drivers about frame registrations
Drivers may need to adjust their filters according
to frame registrations, so notify them about them.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-13 15:45:22 -04:00
Simon Horman a91fd267e3 IPVS: ip_vs_dbg_callid() is only needed for debugging
ip_vs_dbg_callid() and IP_VS_DEBUG_CALLID() are only needed
it CONFIG_IP_VS_DEBUG is defined.

This resolves the following build warning when CONFIG_IP_VS_DEBUG is
not defined.

net/netfilter/ipvs/ip_vs_pe_sip.c:11: warning: 'ip_vs_dbg_callid' defined but not used

Reported-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-13 21:22:35 +02:00
Jan Engelhardt 243bf6e29e netfilter: xtables: resolve indirect macros 3/3 2010-10-13 18:00:46 +02:00
Jan Engelhardt 87a2e70db6 netfilter: xtables: resolve indirect macros 2/3
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-10-13 18:00:41 +02:00
Jan Engelhardt 12b00c2c02 netfilter: xtables: resolve indirect macros 1/3
Many of the used macros are just there for userspace compatibility.
Substitute the in-kernel code to directly use the terminal macro
and stuff the defines into #ifndef __KERNEL__ sections.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-10-13 18:00:36 +02:00
Ben Greear cfd8e12f42 wireless: Print wiphy name in sysfs.
The index cannot be used to reliably reconstruct a phy
name, so explicitly add the phy name to sysfs so that scripts
can figure out the parent phy device for a particular
wireless interface.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-12 16:05:29 -04:00
Eric Dumazet 29b4433d99 net: percpu net_device refcount
We tried very hard to remove all possible dev_hold()/dev_put() pairs in
network stack, using RCU conversions.

There is still an unavoidable device refcount change for every dst we
create/destroy, and this can slow down some workloads (routers or some
app servers, mmap af_packet)

We can switch to a percpu refcount implementation, now dynamic per_cpu
infrastructure is mature. On a 64 cpus machine, this consumes 256 bytes
per device.

On x86, dev_hold(dev) code :

before
        lock    incl 0x280(%ebx)
after:
        movl    0x260(%ebx),%eax
        incl    fs:(%eax)

Stress bench :

(Sending 160.000.000 UDP frames,
IP route cache disabled, dual E5540 @2.53GHz,
32bit kernel, FIB_TRIE)

Before:

real    1m1.662s
user    0m14.373s
sys     12m55.960s

After:

real    0m51.179s
user    0m15.329s
sys     10m15.942s

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-12 12:35:25 -07:00
David S. Miller 8fa6e3d454 Merge branch 'dccp' of git://eden-feed.erg.abdn.ac.uk/net-next-2.6 2010-10-12 11:43:42 -07:00
Andrei Emeltchenko 534c92fde7 Bluetooth: clean up rfcomm code
Remove dead code and unused rfcomm thread events

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12 12:44:53 -03:00
Haijun Liu ab3e571564 Bluetooth: Update conf_state before send config_req out
Update conf_state with L2CAP_CONF_REQ_SENT before send config_req out in
l2cap_config_req().

Signed-off-by: Haijun Liu <haijun.liu@atheros.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12 12:44:53 -03:00
Gustavo F. Padovan 0175d629e0 Bluetooth: Use the proper error value from bt_skb_send_alloc()
&err points to the proper error set by bt_skb_send_alloc() when it
fails.

Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12 12:44:52 -03:00
Gustavo F. Padovan d6b2eb2f89 Bluetooth: make batostr() print in the right order
The Bluetooth core uses the the BD_ADDR in the opposite order from the
human readable order. So we are changing batostr() to print in the
correct order and then removing some baswap(), as they are not needed
anymore.

Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12 12:44:52 -03:00