All the recent support of Creative boards and onboard audio depend on
PCI, but they can't be trimmed easily even if you build without
CONFIG_PCI, since the quirk is detected dynamically and the code has
many branches with the flag check like spec->quirk type or
spec->use_alt_functions.
This patch makes these checks static for CONFIG_PCI=n case so that the
compiler optimizes out. The access to flags are replaced with macros
that are replaced with a static value for CONFIG_PCI=n.
The macros look slightly ugly for avoiding compiler warnings wrt
unused variables, and some additional default-case handlings for
another compiler warnings, but the rest are very straightforward
changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since the commit c647f806b8 ("ALSA: hda - Allow multiple ADCs for
mic mute LED controls") we allow enabling the mic mute LED with
multiple ADCs. The commit changed the function return value to be
zero or a negative error, while this change was overlooked in the
thinkpad_acpi helper code where it still expects a positive return
value for success. This eventually leads to a NULL dereference on a
system that has only a mic mute LED.
This patch corrects the return value check in the corresponding code
as well.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201621
Fixes: c647f806b8 ("ALSA: hda - Allow multiple ADCs for mic mute LED controls")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Creative Audigy SE (SB0570) card currently exhibits an audible pop
whenever playback is stopped or resumed, or during silent periods of an
audio stream. Initialise the IZD bit to the 0 to eliminate these pops.
The Infinite Zero Detection (IZD) feature on the DAC causes the output
to be shunted to Vcap after 2048 samples of silence. This discharges the
AC coupling capacitor through the output and causes the aforementioned
pop/click noise.
The behaviour of the IZD bit is described on page 15 of the WM8768GEDS
datasheet: "With IZD=1, applying MUTE for 1024 consecutive input samples
will cause all outputs to be connected directly to VCAP. This also
happens if 2048 consecutive zero input samples are applied to all 6
channels, and IZD=0. It will be removed as soon as any channel receives
a non-zero input". I believe the second sentence might be referring to
IZD=1 instead of IZD=0 given the observed behaviour of the card.
This change should make the DAC initialisation consistent with
Creative's Windows driver, as this popping persists when initialising
the card in Linux and soft rebooting into Windows, but is not present on
a cold boot to Windows.
Signed-off-by: Alex Stanoev <alex@astanoev.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As ever there's a lot of small and driver specific changes going on
here, but we do also have some relatively large changes in the core
thanks to the hard work of Charles and Morimoto-san:
- More component transitions from Morimoto-san, I think we're about
finished with this. Thanks for all the hard work!
- Morimoto-san also added a bunch of for_each_foo macros
- A bunch of cleanups and fixes for DAPM from Charles.
- MCLK support for several different devices, including CS42L51, STM32
SAI, and MAX98373.
- Support for Allwinner A64 CODEC analog, Intel boards with DA7219 and
MAX98927, Meson AXG PDM inputs, Nuvoton NAU8822, Renesas R8A7744 and
TI PCM3060.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlvNuPoTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0CsxB/91P2RgcUhBSkPO3jsFSerc+RccqD8j
XogqjC62V2T3xqVUYtqqLf0dZFKUPFNoFitN2XdNU36H55DVI+3wxxmwObc64RIc
uB6ptQuwFz7vGeF6r6GWFUAZ7MB518dq/oZYRKrjAW49Lt2YiCD0HJ2gi+0Hm66A
53I7SLH3Q386UHDd+dl7+9BN7gPt0OIKAdsc/Vq7BDYvP+cNEm+YYjXGwaHjLLEC
o8vmj8Ny6x0dytdYuQ/XuekBhGopcfqTbWTpTu43/jCd5rumQXQY2g9CC1eRMlEJ
cm1hOjAErmKkkg2S84B1cMAvK23Szu36sPyeCphSQWOhlL4CFPVyJqic
=9A07
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.0/v4.20
As ever there's a lot of small and driver specific changes going on
here, but we do also have some relatively large changes in the core
thanks to the hard work of Charles and Morimoto-san:
- More component transitions from Morimoto-san, I think we're about
finished with this. Thanks for all the hard work!
- Morimoto-san also added a bunch of for_each_foo macros
- A bunch of cleanups and fixes for DAPM from Charles.
- MCLK support for several different devices, including CS42L51, STM32
SAI, and MAX98373.
- Support for Allwinner A64 CODEC analog, Intel boards with DA7219 and
MAX98927, Meson AXG PDM inputs, Nuvoton NAU8822, Renesas R8A7744 and
TI PCM3060.
This patch fixes the microphone issue for all cards. The previous fix
worked on the ZxR, but not on the AE-5 or Z. This patch has been tested
to work for all cards.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Power-saving is causing plops on audio start/stop on Dell Precision T3600
laptops and Intel DZ77BH boards, add these to the power_save blacklist.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The DMA API does its own zone decisions based on the coherent_dma_mask.
[ Note: as the driver doesn't set the DMA coherent mask, we can assume
the default 32bit DMA, hence it should be safe to drop the flag here
-- tiwai ]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As a preparatory patch for the upcoming -Wimplicit-fallthrough
compiler checks, add the "fall through" annotation in au88xx driver.
Although the usages in both both functions vortex_adbdma_setbuffers()
and vortex_wtdma_setbuffers() look a bit suspicious, we keep the
behavior as before, just to be safer. If it were broken, we should
have already received bug reports.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Lenovo G50-30, like other G50 models, has a Conexant codec that
requires a quirk for its inverted stereo dmic.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1249364
Reported-by: Alexander Ploumistos <alex.ploumistos@gmail.com>
Tested-by: Alexander Ploumistos <alex.ploumistos@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The front MIC on the Lenovo M715 can't record sound, after applying
the ALC294_FIXUP_LENOVO_MIC_LOCATION, the problem is fixed. So add
the pin configuration of this machine to the pin quirk table.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
BIOS on ASUS G751 doesn't seem to map the headphone pin (NID 0x16)
correctly. Add a quirk to address it, as well as chaining to the
previous fix for the microphone.
Reported-by: Håvard <hovardslill@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch removes the echo cancellation control for desktop cards, and
makes use of the special 0x47 SCP command for noise reduction.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch cleans up the patch_ca0132() function with suggestions from
Takashi Sakamoto.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fixes microphone inconsistency issues by adding a delay to
each setup_defaults function. Without this, the microphone only works
intermittently.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a corresponding model list entry for ASUS G751 so that user can
test the quirk for another compatible machines more easily.
Reported-and-tested-by: Håvard <hovardslill@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASUS G751 requires the extra COEF initialization to make it microphone
working properly.
Reported-and-tested-by: Håvard <hovardslill@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Elo VuPoint 15MX has two headphone jacks of which neither work by
default. Disabling automute allows ALSA to work normally with the
speakers & left headphone jack.
Future pin configuration changes may be required in the future to get
the right headphone jack working in tandem.
Signed-off-by: Michael Pobega <mpobega@neverware.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The issue is the same as commit dd9aa335c8 ("ALSA: hda/realtek - Can't
adjust speaker's volume on a Dell AIO"), the output requires to connect
to a node with Amp-out capability.
Applying the same fixup ALC298_FIXUP_SPK_VOLUME can fix the issue.
BugLink: https://bugs.launchpad.net/bugs/1775068
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace "fallthru" with a proper "fall through" annotation.
This fix is part of the ongoing efforts to enabling
-Wimplicit-fallthrough
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds a control for 600 ohm gain on the Sound Blaster ZxR.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch removes the input select control for the ZxR, as it only has
one input option, rear microphone.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds commands for selecting input and output on the Sound
Blaster ZxR. The ZxR has no front panel header, and has line-in on the
separate daughter board, so it only does rear-mic.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds commands for setting up the ZxR after the DSP is
downloaded. The ZxR already shares most of the post-download commands
from the regular Sound Blaster Z.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds separate hda_codec_ops for the DBPro daughter board, as
it behaves more like a generic HDA codec than the other ca0132 cards,
despite having a ca0132 on board.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds a pincfg for the ZxR, and defines which pins are used
for both.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds quirk ID's for the ZxR and it's daughter board, the
DBPro. It also adds a function for determining the quirk for each board
through HDA subsytem ID's instead of PCI subsystem ID's.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fixes an issue where if surround sound was the selected
output and output effects were enabled, the sound wasn't sent to all
channels correctly.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch corrects the control type of the additional AE-5 controls
added in a previous patch from HDA_INPUT to HDA_OUTPUT.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds controls for the AE-5's headphone gain setting, and the
DAC's interpolation filter setting.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the input selection commands for the Sound BlasterX
AE-5.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch cleans up ca0132_alt_out_select by moving the card specific
output commands into a separate function. As more cards are added, the
function ca0132_alt_out_select is going to get more bloated with these,
so moving into a separate function tries to keep that from happening.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch cleans up some of the formatting of the post-dsp load setup
functions, and also merges some of the sub functions into individual
ones.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Recon3D, AE-5, Z and ZxR all share the same firmware file. Rename
this from the specific "ctefx-sbz.bin" to "ctefx-desktop.bin" and set
the AE-5 and Recon3D to use it as well.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds AE-5 specific stuff to the ca0132_alt_init function.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds AE-5 pre-init functions that happen before the main
ca0132_alt_init, and gives functions related to the ca0113 a ca0113
prefix instead of ca0132. It also adds functions to write to the 8051's
SFRs, and to write the special ca0113 commands for the AE-5.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the unique writes for the AE-5 on startup to
ca0132_mmio_init. The other cards share some addresses written to, but
use different values.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch sets the bool values for the AE-5, as well as selects the
mixer it will use.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the pincfg for the Sound BlasterX AE-5, and cleans up
the function it's assigned in.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the PCI subsys ID quirk for the Sound BlasterX AE-5.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch defines some new verbs found from reverse engineering of the
onboard 8051 CPU, and a control param found there as well. This clears
up usage of these verbs in other parts of the driver, and removes their
usage where they're now known to be unnecessary.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace "fallthru" with a proper "fall through" annotation.
This fix is part of the ongoing efforts to enabling
-Wimplicit-fallthrough
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent change of vga_switcheroo allowed the runtime PM for
HD-audio on AMD GPUs, but this also resulted in a regression. When
the HD-audio controller driver gets runtime-suspended, HD-audio link
is turned off, and the hotplug notification is ignored. This leads to
the inconsistent audio state (the connection isn't notified and ELD is
ignored).
The best fix would be to implement the proper ELD notification via the
audio component, but it's still not ready. As a quick workaround,
this patch adds the check of runtime_idle and allows the runtime
suspend only when the vga_switcheroo is bound with discrete GPU.
That is, a system with a single GPU and APU would be again without
runtime PM to keep the HD-audio link for the hotplug notification and
ELD read out.
Also, the codec->auto_runtime_pm flag is set only for the discrete GPU
at the time GPU gets bound via vga_switcheroo (i.e. only dGPU is
forcibly runtime-PM enabled), so that APU can still get the ELD
notification.
For identifying which GPU is bound, a new vga_switcheroo client
callback, gpu_bound, is implemented. The vga_switcheroo simply calls
this when GPU is bound, and tells whether it's dGPU or APU.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200945
Fixes: 07f4f97d7b ("vga_switcheroo: Use device link for HDA controller")
Reported-by: Jian-Hong Pan <jian-hong@endlessm.com>
Tested-by: Jian-Hong Pan <jian-hong@endlessm.com>
Acked-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai
Alex Stanoev
Connor McAdams
Mark Brown
Hans de Goede
Christoph Hellwig
Jeremy Cline
Hui Wang
Michael Pobega
Kai-Heng Feng
Gustavo A. R. Silva