Commit Graph

117 Commits

Author SHA1 Message Date
Harvey Harrison b1ce1fd778 ieee1394: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:30 +02:00
Stefan Richter a4b47d62c5 ieee1394: sbp2: relax SCSI DMA alignment
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:29 +02:00
Stefan Richter 6e45ef4c7a ieee1394: sbp2: fix for SYM13FW500 bridge (Datafab disk)
Fix I/O errors due to SYM13FW500's inability to handle larger request
sizes.  Reported by Piergiorgio Sartor <piergiorgio.sartor@nexgo.de> for
firewire-sbp2 in https://bugzilla.redhat.com/show_bug.cgi?id=436879

This fix is necessary because sbp2's default request size limit has been
lifted since 2.6.25-rc1.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jarod Wilson <jwilson@redhat.com>
2008-03-14 00:56:59 +01:00
Stefan Richter ef774c16a7 ieee1394: sbp2: fix rescan-scsi-bus
rescan-scsi-bus used to add SBP-2 targets which weren't there.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-02-19 19:57:24 +01:00
Stefan Richter d94a983526 ieee1394: sbp2: add INQUIRY delay workaround
Add the same workaround as found in fw-sbp2 for feature parity and
compatibility of the workarounds module parameter.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jarod Wilson <jwilson@redhat.com>
2008-02-16 15:40:34 +01:00
Stefan Richter 5fcf500058 ieee1394: sbp2: fix bogus s/g access change
sg_dma_len(sg) is invalid before the s/g list is DMA-mapped.

This fixes a post 2.6.24 regression which prevents access to SBP-2
devices on several architectures, introduced by "ieee1394: sbp2: s/g
list access cosmetics", commit 825f1df545.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-02-02 13:48:16 +01:00
Stefan Richter 4e6343a10b ieee1394: sbp2: raise default transfer size limit
This patch speeds up sbp2 a little bit --- but more importantly, it
brings the behavior of sbp2 and fw-sbp2 closer to each other.  Like
fw-sbp2, sbp2 now does not limit the size of single transfers to 255
sectors anymore, unless told so by a blacklist flag or by module load
parameters.

Only very old bridge chips have been known to need the 255 sectors
limit, and we have got one such chip in our hardwired blacklist.  There
certainly is a danger that more bridges need that limit; but I prefer to
have this issue present in both fw-sbp2 and sbp2 rather than just one of
them.

An OXUF922 with 400GB 7200RPM disk on an S400 controller is sped up by
this patch from 22.9 to 23.5 MB/s according to hdparm.  The same effect
could be achieved before by setting a higher max_sectors module
parameter.  On buses which use 1394b beta mode, sbp2 and fw-sbp2 will
now achieve virtually the same bandwidth.  Fw-sbp2 only remains faster
on 1394a buses due to fw-core's gap count optimization.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30 22:22:21 +01:00
Stefan Richter 825f1df545 ieee1394: sbp2: s/g list access cosmetics
Replace sg->length by sg_dma_len(sg).  Rename a variable for shorter
line lengths and eliminate some superfluous local variables.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30 22:22:19 +01:00
Stefan Richter 8c4ac0949f ieee1394: sbp2: prepare for s/g chaining
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30 22:22:18 +01:00
James Bottomley 465ff3185e [SCSI] relax scsi dma alignment
This patch relaxes the default SCSI DMA alignment from 512 bytes to 4
bytes.  I remember from previous discussions that usb and firewire have
sector size alignment requirements, so I upped their alignments in the
respective slave allocs.

The reason for doing this is so that we don't get such a huge amount of
copy overhead in bio_copy_user() for udev.  (basically all inquiries it
issues can now be directly mapped).

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:29:22 -06:00
Adrian Bunk 87ae9afdca cleanup asm/scatterlist.h includes
Not architecture specific code should not #include <asm/scatterlist.h>.

This patch therefore either replaces them with
#include <linux/scatterlist.h> or simply removes them if they were
unused.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-02 08:47:06 +01:00
Jens Axboe 45711f1af6 [SG] Update drivers to use sg helpers
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22 21:19:53 +02:00
Stefan Richter 261b5f664c ieee1394: sbp2: fix unsafe iteration over list of devices
sbp2_host_reset and sbp2_handle_status_write are not serialized against
sbp2_alloc_device and sbp2_remove_device.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-16 23:59:55 +02:00
Stefan Richter a2ee3f9bbb ieee1394: sbp2: fix sbp2_remove_device for error cases
Bug found by Olaf Hering <olh@suse.de>:
sbp2util_remove_command_orb_pool requires a valid lu->hi pointer.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-08-25 18:00:26 +02:00
Stefan Richter a9c2f18800 ieee1394: revert "sbp2: enforce 32bit DMA mapping"
Revert commit 0555659d63 from 2.6.22-rc1.
The dma_set_mask call somehow failed on a PowerMac G5, PPC64:
http://lkml.org/lkml/2007/8/1/344

Should there ever occur a DMA mapping beyond the physical DMA range, a
proper SBP-2 firmware will report transport errors.  So let's leave it
at that.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Tested-by: Olaf Hering <olh@suse.de>
2007-08-02 20:34:16 +02:00
Linus Torvalds bc06cffdec Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (166 commits)
  [SCSI] ibmvscsi: convert to use the data buffer accessors
  [SCSI] dc395x: convert to use the data buffer accessors
  [SCSI] ncr53c8xx: convert to use the data buffer accessors
  [SCSI] sym53c8xx: convert to use the data buffer accessors
  [SCSI] ppa: coding police and printk levels
  [SCSI] aic7xxx_old: remove redundant GFP_ATOMIC from kmalloc
  [SCSI] i2o: remove redundant GFP_ATOMIC from kmalloc from device.c
  [SCSI] remove the dead CYBERSTORMIII_SCSI option
  [SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMA
  [SCSI] Clean up scsi_add_lun a bit
  [SCSI] 53c700: Remove printk, which triggers because of low scsi clock on SNI RMs
  [SCSI] sni_53c710: Cleanup
  [SCSI] qla4xxx: Fix underrun/overrun conditions
  [SCSI] megaraid_mbox: use mutex instead of semaphore
  [SCSI] aacraid: add 51245, 51645 and 52245 adapters to documentation.
  [SCSI] qla2xxx: update version to 8.02.00-k1.
  [SCSI] qla2xxx: add support for NPIV
  [SCSI] stex: use resid for xfer len information
  [SCSI] Add Brownie 1200U3P to blacklist
  [SCSI] scsi.c: convert to use the data buffer accessors
  ...
2007-07-15 16:51:54 -07:00
Stefan Richter 77bba7aea7 ieee1394: sbp2: change some module parameters from int to bool
This is upwards compatible, except that integer values other than 0 or 1
are no longer accepted.  But values like "Y", "N", "no", "nnoooh!" work
now.

Also, improve a comment on the serialize_io parameter and make the
ORB_SET_EXCLUSIVE macro ultra-safe.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-07-10 00:07:41 +02:00
Stefan Richter d7794c8668 ieee1394: sbp2: offer SAM-conforming target port ID in sysfs
With "modprobe sbp2 long_ieee1394_id=y", the format of
/sys/bus/scsi/devices/*:*:*:*/ieee1394_id is changed from e.g.
0001041010004beb:0:0 to 0001041010004beb:00042c:0000.

The longer format fully conforms to object identifier sizes as per
SAM(-2...4) and reflects what the SAM target port identifier is meant to
contain:  A Discovery ID allegedly specified by ISO/IEC 13213:1994 ---
however there is no such thing; the authors of SAM probably meant
Directory ID).  Especially target nodes with multiple dynamically added
targets may use Directory IDs to persistently identify target ports.

The new format is independent of implementation details of nodemgr.
Thus the same ieee1394_id attribute format can be implemented in the new
firewire stack.

The ieee1394_id is typically used to create persistently named links in
/dev/disk/by-id.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-05-31 21:40:13 +02:00
James Bottomley 5bc65793cb [SCSI] Merge up to linux-2.6 head
Conflicts:

	drivers/scsi/jazz_esp.c

Same changes made by both SCSI and SPARC trees: problem with UTF-8
conversion in the copyright.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-30 23:57:05 -05:00
Stefan Richter 20e2008e1f ieee1394: sbp2: include workqueue.h
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-05-27 23:20:58 +02:00
FUJITA Tomonori d7dea2cf80 [SCSI] sbp2: convert to use the data buffer accessors
- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-27 13:10:08 -05:00
Andrew Morton f84c922ba1 ieee1394: sbp2: include fixes
drivers/ieee1394/sbp2.c: In function 'sbp2util_access_timeout':
drivers/ieee1394/sbp2.c:399: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function)
drivers/ieee1394/sbp2.c:399: error: (Each undeclared identifier is reported only once
drivers/ieee1394/sbp2.c:399: error: for each function it appears in.)
drivers/ieee1394/sbp2.c:399: warning: implicit declaration of function 'signal_pending'
drivers/ieee1394/sbp2.c:399: warning: implicit declaration of function 'schedule_timeout'
drivers/ieee1394/sbp2.c: In function 'sbp2_prep_command_orb_sg':
drivers/ieee1394/sbp2.c:1438: warning: implicit declaration of function 'page_address'
drivers/ieee1394/sbp2.c:1438: warning: passing argument 2 of 'dma_map_single' makes pointer from integer without a cast
drivers/ieee1394/sbp2.c: In function 'sbp2_handle_status_write':
drivers/ieee1394/sbp2.c:1842: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function)

Possibly due to changes in -mm, but this file should explicitly include the
headers for the stuff it uses.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (brought into alphabetic order)
2007-04-30 00:00:27 +02:00
Stefan Richter 3d269cb50c ieee1394: sbp2: move some memory allocations into non-atomic context
When the command ORB pool is created, the ORB list won't be accessed
concurrently.  Therefore we don't have to take the spinlock there.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-04-30 00:00:27 +02:00
Stefan Richter 2446a79f4f ieee1394: sbp2: optimize DMA direction of s/g tables
Unlike the name suggests, "cmd->scatter_gather_element" holds only the
s/g table, not the actual s/g elements.  Since the table is only read
but never written by the device, DMA_BIDIRECTIONAL can be replaced by
DMA_TO_DEVICE which may be cheaper on some architectures.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-04-30 00:00:27 +02:00
Stefan Richter 0555659d63 ieee1394: sbp2: enforce 32bit DMA mapping
In order to use OHCI-1394 physical DMA, all s/g elements, s/g tables,
ORBs, and response buffers have to reside within the first 4 GB of the
FireWire controller's physical address space.  Set the correct mask for
DMA mappings.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-04-30 00:00:27 +02:00
Stefan Richter beb2fdcad1 ieee1394: sbp2: lower block queue alignment requirement
The old setting is copy & waste from usb-storage and doesn't apply to
sbp2.  There is only 4-byte alignment required for everything, except
for S/G table elements which have to be 8-byte aligned according to the
SBP-2 spec.  (They happen to be ____cacheline_aligned in our
implementation.  Whether that's good is another question.)

We now simply don't tune block queue alignment at all.  The default
alignment would surely never become anything else than a multiple of 4,
else tons of calls to blk_queue_dma_alignment would have to be added
everywhere in drivers/...

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-02-08 20:59:54 +01:00
Stefan Richter 9c31b38723 ieee1394: sbp2: remove bogus "emulated" host flag
There is no emulation going on here.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-02-08 20:59:48 +01:00
Stefan Richter 4618fd3001 ieee1394: sbp2: use a better wildcard for blacklist
0x000000 could be a valid value to match against, but anything bigger
than 0xffffff cannot.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-02-08 20:57:08 +01:00
Stefan Richter 1a74bc68e4 ieee1394: sbp2: fix probing of some DVD-ROM/RWs
Since commit 98e238cd42 in Linux 2.6.19,
"ieee1394: sbp2: don't prefer MODE SENSE 10", some FireWire DVD-ROMs and
DVD-RWs were mistaken as CD-ROM because sr_mod now sent MODE SENSE 6.
The MMC command set includes only MODE SENSE 10.
http://bugzilla.kernel.org/show_bug.cgi?id=7800

This fix lets sbp2 switch scsi_device.use_10_for_rw on for MMC LUs.
This should rather be done in the command set driver sr_mod, not in the
sbp2 transport driver, and an according patch will follow for a next
Linux release.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-01-10 20:24:42 +01:00
Stefan Richter 97d552e35d ieee1394: sbp2: fix bogus dma mapping
Need to use a PCI device, not a FireWire host device.  Problem found by
Andreas Schwab, mistake pointed out by Benjamin Herrenschmidt.
http://ozlabs.org/pipermail/linuxppc-dev/2006-December/029595.html

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Tested-by: Andreas Schwab <schwab@suse.de>
2006-12-30 14:26:59 +01:00
Stefan Richter b2bb550c4a ieee1394: sbp2: pass REQUEST_SENSE through to the target
Delete some incorrect code, left over from the initial driver submission
in March 2001.

SBP-2 targets should provide sense data via the SBP-2 status block
(autosense).  We have to pass the REQUEST_SENSE command through to
targets which don't implement autosense, if there are any, and to
accomodate application clients which use this command.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-30 14:26:41 +01:00
Stefan Richter ec9b7e1044 ieee1394: sbp2: code formatting around work_struct stuff
Merge is finished, can bring the code in readable style again.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 23:23:25 +01:00
Ben Collins ed30c26ee8 ieee1394: Consolidate driver registering
This patch consolidates some bookkeeping for driver registering. It
closely models what pci_register_driver() does. The main addition is
that the owner of the driver is set, so we get a proper symlink
for /sys/bus/ieee1394/driver/*/module.

Also moves setting of name and bus type into nodemgr. Because of this,
we can remove the EXPORT_SYMBOL for ieee1394_bus_type, since it's now
only used in ieee1394.ko.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 23:11:55 +01:00
Stefan Richter 9b7d9c096d ieee1394: sbp2: convert from PCI DMA to generic DMA
API conversion without change in functionality

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 23:11:43 +01:00
Stefan Richter 58272c1c03 ieee1394: sbp2: wrap two functions into one
Move the body of a function into its only caller.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 23:04:03 +01:00
Stefan Richter 2a533b179d ieee1394: sbp2: update comment on things to do
Some people actually look at those comments.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 23:03:49 +01:00
Stefan Richter cd641f68d6 ieee1394: sbp2: use list_move_tail()
It's OK to reorder list_del() and sbp2util_free_command_dma() here.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 23:03:38 +01:00
Stefan Richter 138c8af864 ieee1394: sbp2: more concise names for types and variables
"struct scsi_id_instance_data" represents a logical unit.
Rename it to "struct sbp2_lu", and "scsi_id" to "lu".
Rename some other variables too.
Wrap almost all lines after at most 80 columns.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 22:59:34 +01:00
Stefan Richter 9117c6dc43 ieee1394: sbp2: remove unused struct members
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 22:52:41 +01:00
Stefan Richter 28b066795f ieee1394: sbp2: proper unit in module parameter description
It's 2^20 bit/s, not 0.001 bit.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 22:52:29 +01:00
Stefan Richter ca0c745399 ieee1394: sbp2: clean up sbp2_ namespace
Prepend sbp2*_ to anything globally defined in sbp2.c except for some
macros.  Strip sbp2_ from names of struct members.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 22:51:53 +01:00
Stefan Richter 5796aa7b11 ieee1394: sbp2: some conditions in queue_command are unlikely
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 22:49:39 +01:00
Stefan Richter e8ca5668f1 ieee1394: sbp2: remove superfluous comments
And update and reformat remaining comments.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 22:45:41 +01:00
Stefan Richter d19c776414 ieee1394: sbp2: delayed_work -> work_struct
This work is not delayed.

Also bring the code format in a state which reduces my work to merge
pending sbp2 patchs.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 22:40:33 +01:00
Stefan Richter edf1fb213e ieee1394: sbp2: remove debug macros
No need to keep them in released sources.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 21:46:48 +01:00
Stefan Richter 35644090d8 ieee1394: sbp2: consolidate log levels
Replace some calls to SBP2_ERR and SBP2_WARN by SBP2_INFO.
Remove logging macros SBP2_NOTICE and SBP2_WARN.
Remove direct usage of HPSB_ logging macros.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 21:46:40 +01:00
Stefan Richter 0b885449ac ieee1394: sbp2: remove duplicate code
The same case is handled further below in sbp2scsi_complete_command.
Note, the second version behaves slightly different but looks
preferable.  It's an extremely unlikely case by the way.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 21:46:30 +01:00
Stefan Richter 8c8009e69b ieee1394: sbp2: remove dead code
This has been within #if 0 for a long time and is wrong anyway.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 21:46:20 +01:00
Stefan Richter ea42ea0f58 ieee1394: sbp2: clean up function declarations
Remove unnecessary function prototypes.
Remove variable names from function prototypes.
Move declarations from sbp2.h to sbp2.c.
Move definitions of driver templates together near the top of sbp2.c.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 21:46:10 +01:00
Stefan Richter 66743e061f ieee1394: sbp2: remove irritating log message
The queue depth can be read from /sys/bus/scsi/devices/*/queue_depth,
so don't log it.  And the hint about speed improvements is misleading,
at least under current kernels.  If serialization is switched off, read
performance is typically increased by less than 10%.  (I did not test
write performance recently.)  On the other hand, serialize_io=0 is not
yet safe due to some implementation issues that are not trivial to fix.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 21:45:58 +01:00