Commit Graph

166 Commits

Author SHA1 Message Date
Petr Mladek 37ebb54915 usb: hub: rename khubd to hub_wq in documentation and comments
USB hub has started to use a workqueue instead of kthread. Let's update
the documentation and comments here and there.

This patch mostly just replaces "khubd" with "hub_wq". There are only few
exceptions where the whole sentence was updated. These more complicated
changes can be found in the following files:

	   Documentation/usb/hotplug.txt
	   drivers/net/usb/usbnet.c
	   drivers/usb/core/hcd.c
	   drivers/usb/host/ohci-hcd.c
	   drivers/usb/host/xhci.c

Signed-off-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-23 22:33:19 -07:00
Thomas Pugliese 275e517c30 usb: wusbcore: fix device disconnect on rekey timeout
If three or more wireless devices are connected and two of them
disconnect between 1-3 seconds apart, it can cause the HWA to disconnect
the remaining devices due to failing to see a DN_Alive message from
them.  This happens because when the HWA detects that the first device
is gone, it will attempt to rekey the remaining devices.  If one of the
devices is not responding because it has also been disconnected but not
yet timed out, the synchronous rekey operation running on the wusbd
workqueue can block for up to 5 seconds.  This will prevent the
KEEPALIVE timer from running and DN_Alive messages from being processed
because they are processed by the same workqueue.  This patch moves the
rekey operation to a separate workqueue since it is the only wusb work
item that needs to communicate directly with wireless devices.  The rest
of the WUSB work items either perform no device IO or communicate
directly with the host controller and should not be blocked out by a
non-responding wireless device.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-23 22:06:59 -07:00
Thomas Pugliese b94be0db5b usb: wusbcore: skip done segs before completing aborted transfer
When completing an aborted transfer, skip done segs before calling
wa_complete_remaining_xfer_segs to avoid a runtime warning.  The warning
is harmless in this case but avoiding it prevents false error reports.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-23 22:06:59 -07:00
Thomas Pugliese f55025289c usb: wusbcore: USB_WUSB_CBAF depends on USB
Add USB build dependency for USB_WUSB_CBAF.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-23 22:06:33 -07:00
Thomas Pugliese e8f8ba4736 usb: wusbcore: remove USB_WUSB build dependency on PCI
Wireless USB does not require PCI so remove USB_WUSB build dependency on
PCI.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-23 22:06:33 -07:00
Julia Lawall 4f8c0602ea wusb: delete double assignment
Delete successive assignments to the same location.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression i;
@@

*i = ...;
 i = ...;
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-23 22:03:54 -07:00
Peter Chen 6835a3a02b usb: wusbcore: fix below build warning
linux-2.6/drivers/usb/wusbcore/wa-xfer.c: In function 'wa_buf_in_cb':
linux-2.6/drivers/usb/wusbcore/wa-xfer.c:2590: warning: 'rpipe' may be used uninitialized in this function

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Suggested-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-19 11:28:53 -05:00
Johan Hovold df3ce23a56 USB: wusbcore: fix control-pipe directions
Fix incorrect pipe directions in control requests (which has been
silently fixed up by USB core).

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27 15:04:10 -07:00
Thomas Pugliese bd130adaca usb: wusbcore: fix panic in wusbhc_chid_set
If no valid CHID value has previously been set on an HWA, writing a
value of all zeros will cause a kernel panic in uwb_radio_stop because
wusbhc->uwb_rc has not been set.  This patch skips the call to
uwb_radio_stop if wusbhc->uwb_rc has not been initialized.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-24 12:45:41 -07:00
Thomas Pugliese 7584f2ebc1 usb: wusbcore: convert nested lock to use spin_lock instead of spin_lock_irq
Nesting a spin_lock_irq/unlock_irq inside a lock that has already
disabled interrupts will enable interrupts before we are ready when
spin_unlock_irq is called.  This patch converts the inner lock to use
spin_lock and spin_unlock instead.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-24 12:45:40 -07:00
Thomas Pugliese 335053fe8c usb: wusbcore: use multiple urbs for HWA iso transfer result frame reads
Submit multiple concurrent urbs for HWA isochronous transfer result data
frame reads.  This keeps the read pipeline full and significantly
improves performance in cases where the frame reads cannot be combined
because they are not contiguous or multiples of the max packet size.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-08 22:30:28 -08:00
Thomas Pugliese 04a378f36d usb: wusbcore: combine iso transfer result frame reads when possible
When reading the transfer result data for an isochronous in request, if
the current frame actual_length is contiguous with the next frame and
actual_length is a multiple of the DTI endpoint max packet size, combine
the current frame with the next frame in a single URB.  This reduces the
number of URBs that must be submitted in that case which increases
performance and reduces CPU interrupt overhead.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-08 22:30:28 -08:00
Thomas Pugliese 86e2864d7e usb: wusbcore: disable transfer notifications for Alereon HWAs
The HWA driver does not do anything with transfer notifications after
receiving the first one and the Alereon HWA allows them to be disabled
as a performance optimization.  This patch sends a vendor specific
command to the Alereon HWA on startup to disable transfer notifications.
If the command is successful, the DTI system is started immediately
since that would normally be started upon the first reception of a
transfer notification which will no longer be sent.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-07 12:52:04 -08:00
Thomas Pugliese 5090ecea13 usb: wusbcore: don't mark WA_SEG_DTI_PENDING segs as done in urb_dequeue
Data for transfer segments in the WA_SEG_DTI_PENDING state is actively
being read by the driver.  Let the buffer read callback handle the
transfer cleanup since cleaning it up in wa_urb_dequeue will cause the
read callback to access invalid memory if the transfer is completed.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-07 12:39:39 -08:00
Thomas Pugliese 2a6da97ff5 usb: wusbcore: fix potential double list_del on urb dequeue
This patch locks rpipe->seg_lock around the entire transfer segment
cleanup loop in wa_urb_dequeue instead of just one case of the switch
statement.  This fixes a race between __wa_xfer_delayed_run and
wa_urb_dequeue where a transfer segment in the WA_SEG_DELAYED state
could be removed from the rpipe seg_list twice leading to memory
corruption.  It also switches the spin_lock call to use the non-irqsave
version since the xfer->lock is already held and irqs already disabled.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-07 12:39:39 -08:00
Thomas Pugliese 927c4dac34 usb: wusbcore: fix compile warnings
Fix "pointer targets differ in signedness" and "variable set but not
used" warnings

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28 20:23:03 -08:00
Thomas Pugliese d1c5dd6f8e usb: wusbcore: add info to HWA debug prints
This patch adds a debug print in the transfer dequeue case where a
transfer result arrives for a transfer that has already been cleaned up.
It also adds the transfer ID to some debug prints and prints error codes
as signed integers in a couple of others.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28 16:14:48 -08:00
Thomas Pugliese ecf3701ced usb: wusbcore: read actual_length bytes isoc in segments
Use the iso_frame_desc.actual_length field instead of length when
reading isoc in data segments from the HWA.  This fixes a case where the
isoc in read URB would never complete because it expected the HWA to
send more data than it actually did.  When this happened the URB would
be stuck in the driver preventing module unload and clean shutdown.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28 16:14:48 -08:00
Thomas Pugliese 4659a2452b usb: wusbcore: adjust iterator correctly when searching for ep comp descriptor
If the endpoint companion descriptor is not the first descriptor in the
extra descriptor buffer of a usb_host_endpoint, the loop in
rpipe_epc_find will get its buffer pointer and remaining size values out
of sync.  The buffer ptr 'itr' is advanced by the descriptor's bLength
field but the remaining size value 'itr_size' is decremented by the
bDescriptorType field which is incorrect.  This patch fixes the loop to
decrement itr_size by bLength as it should.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28 16:14:48 -08:00
Thomas Pugliese e500d526f9 usb: wusbcore: add a convenience function for completing a transfer segment
This patch adds a convenience function for the commonly performed task
of marking a transfer segment as done.  It combines the 3 steps of
setting the segment status, incrementing the segs_done field of the
transfer and checking if the completed segment results in the transfer
also being done.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28 16:13:09 -08:00
Thomas Pugliese 5da43afc2b usb: wusbcore: prevent urb dequeue and giveback race
This patch takes a reference to the wa_xfer object in wa_urb_dequeue to
prevent the urb giveback code from completing the xfer and freeing it
while wa_urb_dequeue is executing.  It also checks for done at the start
to avoid a double completion scenario.  Adding the check for done in
urb_dequeue means that any other place where a submitted transfer
segment is marked as done must complete the transfer if it is done.
__wa_xfer_delayed_run was not checking this case so that check was added
as well.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28 16:13:09 -08:00
Thomas Pugliese acfadcea2a usb: wusbcore: fix stranded URB after HWA unplug
This patch adds error checking to the abort request callback to forcibly
clean up the dequeued transfers if the abort request failed.  The
wa_complete_remaining_xfer_segs was modified so that it could be used in
this situation as well.  This fixes a stranded URB/PNP hang when the HWA
is unplugged while playing audio to a wireless audio device.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28 16:13:09 -08:00
Thomas Pugliese 618836cc34 usb: wusbcore: fix kernel panic on HWA unplug
This patch adds ref counting to sections of code that operate on struct
wa_xfer objects that were missing it.  Specifically, error handling
cases need to be protected from freeing the xfer while it is still in
use elsewhere.  This fixes a kernel panic that can occur when pulling
the HWA dongle while data is being transferred to a wireless device.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28 16:13:09 -08:00
Paul Gortmaker 803a536243 usb: delete non-required instances of include <linux/init.h>
None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>.  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-08 15:01:39 -08:00
Rahul Bedarkar 2627cb0812 USB: wusbcore: fix up coding style issues in wa-nep.c
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07 16:19:31 -08:00
Rahul Bedarkar 0c106d0aeb USB: wusbcore: fix up coding style issues in wa-rpipe.c
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07 16:19:31 -08:00
Rahul Bedarkar a7737e3444 USB: wusbcore: fix up coding style issues in wusbhc.c and wusbhc.h
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07 16:19:31 -08:00
Rahul Bedarkar 4865131799 USB: wusbcore: fix up line break coding style issues in mmc.c
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07 16:19:31 -08:00
Rahul Bedarkar 521aea08e3 USB: wusbcore: fix up line break coding style issues in security.c
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07 16:19:30 -08:00
Rahul Bedarkar 62316ff4bc USB: wusbcore: fix up line break coding style issues in wa-hc.h
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07 16:19:30 -08:00
Rahul Bedarkar b0b4cb5cd1 USB: wusbcore: fix up minor coding style issues in cbaf.c
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07 16:18:42 -08:00
Rahul Bedarkar 1076e7a4d9 USB: wusbcore: correct spelling mistakes in comments and error string
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07 16:17:41 -08:00
Thomas Pugliese b4a9dfb02d usb: wusbcore: add debug prints to reservation and channel change
This patch adds debug prints to the reservation and channel change
sequence to help with debugging channel change problems.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-20 12:06:46 -08:00
Thomas Pugliese 226b3a2e2e usb: wusbcore: add isochronous IN support to HWA
This patch adds support for isochronous IN transfers to the HWA driver.
The changes include removing the checks that return errors for isoc IN
URBs and adding functionality to read the isoc data returned from the
HWA.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-17 17:01:46 -08:00
Greg Kroah-Hartman d59abb9325 Merge branch 3.13-rc4 into usb-next 2013-12-16 08:46:03 -08:00
Thomas Pugliese 756a2eed67 usb: wusbcore: set packet count correctly on isoc transfers
This patch correctly sets the dwNumOfPackets field of the HWA transfer
request for isochronous transfers with multiple segments.  Previously
all segments used the value that was set for the first segment which may
not be correct.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-09 13:29:21 -08:00
Thomas Pugliese ea1af42d3d usb: wusbcore: move isoc_frame_index from wa_xfer to wa_seg
If multiple segments belonging to an isoc transfer are submitted
concurrently, the isoc_frame_index field in struct wa_xfer can get
corrupted.  This patch moves the isoc_frame_index field from struct
wa_xfer to struct wa_seg to prevent this from happening.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-09 13:29:21 -08:00
Thomas Pugliese 7b3e3740f2 usb: wusbcore: use USB_CTRL_SET_TIMEOUT and USB_CTRL_GET_TIMEOUT
Use USB_CTRL_SET_TIMEOUT and USB_CTRL_GET_TIMEOUT for USB control
messages instead of an arbitrary 1s timeout value.  This is particularly
useful for WUSB since in the worst case RF scanario, a WUSB device can
be unresponsive for up to 4s and still be connected.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-09 13:28:48 -08:00
Thomas Pugliese 7005234c18 usb: wusbcore: fix short transfers
If a URB is broken up into multiple transfer segments and a short
transfer occurs in any segment other than the last, the URB will
currently get stuck in the driver forever.  This patch adds a check for
a short transfer and cleans up any pending segments so the URB can
complete properly.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-09 13:26:35 -08:00
Thomas Pugliese e05a1fd946 usb: wusbcore: return -ENOENT for unlinked URBs.
Return -ENOENT for unlinked URBs.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08 17:54:15 -08:00
Thomas Pugliese bbfc34201f usb: wusbcore: add more info to debug prints in urb_unlink path
Add more info to debug prints in urb_unlink path

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08 17:54:15 -08:00
Thomas Pugliese b374487ebe usb: wusbcore: add calls to usb_hcd_link_urb_to_ep, usb_hcd_unlink_urb_from_ep, and
Add calls to usb_hcd_link_urb_to_ep, usb_hcd_unlink_urb_from_ep, and
usb_hcd_check_unlink_urb in the appropriate locations.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08 17:54:15 -08:00
Thomas Pugliese 471e42ad14 usb: wusbcore: fix deadlock in wusbhc_gtk_rekey
When multiple wireless USB devices are connected and one of the devices
disconnects, the host will distribute a new group key to the remaining
devicese using wusbhc_gtk_rekey.  wusbhc_gtk_rekey takes the
wusbhc->mutex and holds it while it submits a URB to set the new key.
This causes a deadlock in wa_urb_enqueue when it calls a device lookup
helper function that takes the same lock.

This patch changes wusbhc_gtk_rekey to submit a work item to set the GTK
so that the URB is submitted without holding wusbhc->mutex.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-02 15:21:04 -08:00
Thomas Pugliese 6161ae5f1f usb: wusbcore: do device lookup while holding the hc mutex
This patch modifies the device notification handler to not look up the
wusb_dev object before it calls the lower-level handler routines since
the wusbhc mutex is not held when calling those routines and the device
could go away in the meantime.  Instead, let the individual notification
handlers get the device ptr if they need to after they have taken the
mutex.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-02 15:21:04 -08:00
Thomas Pugliese f4042c068a usb: wusbcore: send keepalives to unauthenticated devices
This patch modifies the WUSB device disconnect timer code to send
keepalives to all connected devices even if they are not authenticated.
This fixes a problem where unauthenticated devices that lose their
connection before they are authenticated will stay in the device tree
forever.  More importantly, devices in this situation will never
relinquish their port on the root hub so eventually all root ports will
be taken up and no other devices can connect.

A comment in the existing code states that there are some devices that
may not respond to keepalives if they have not been authenticated.  That
comment is about 5 years old and I don't know of any WUSB devices that
act that way.  Either way, any buggy devices that may still be around
will continue to work as long as they can transition to the
authenticated state within the WUSB LOA timeout of 4s, which is not
unreasonable to expect.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-02 15:21:03 -08:00
Thomas Pugliese f74b75e7f9 usb: wusbcore: change WA_SEGS_MAX to a legal value
change WA_SEGS_MAX to a number that is legal according to the WUSB
spec.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29 16:44:49 -07:00
Thomas Pugliese f07ddb9ef5 usb: wusbcore: add a quirk for Alereon HWA device isoc behavior
Add a quirk for Alereon HWA devices to concatenate the frames of isoc
transfer requests.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29 16:44:49 -07:00
Thomas Pugliese 2101242cef usb: wusbcore: combine multiple isoc frames in a single transfer request.
Combine multiple isoc frames in a single transfer request.  This allows
the HWA to take advantage of bursting to deliver data to endpoints
whose logical service interval is less than the minimum wireless USB
service interval of 4ms.  Wireless audio quality is much improved after
this update.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29 16:44:49 -07:00
Thomas Pugliese 7b6bc07ab5 usb: wusbcore: set the RPIPE wMaxPacketSize value correctly
For isochronous endpoints, set the RPIPE wMaxPacketSize value using
wOverTheAirPacketSize from the endpoint companion descriptor instead of
wMaxPacketSize from the normal endpoint descriptor.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29 16:44:49 -07:00
Alexey Khoroshilov f2c28cfc26 USB: wusbcore: fix usb_dev leaks
cbaf_probe() does cbaf->usb_dev = usb_get_dev(interface_to_usbdev(iface)),
but there is no usb_put_dev() anywhere in cbaf.

The patch adds usb_put_dev() to cbaf_disconnect() and to an error path in cbaf_probe().
Also it adds missed usb_put_intf(iface) to the error path.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-19 14:23:15 -07:00