Commit Graph

530 Commits

Author SHA1 Message Date
Arnd Bergmann 245db3c349 phy: bcm-ns-usb3: fix MDIO_BUS dependency
The driver attempts to 'select MDIO_DEVICE', but the code
is actually a loadable module when PHYLIB=m:

drivers/phy/broadcom/phy-bcm-ns-usb3.o: In function `bcm_ns_usb3_mdiodev_phy_write':
phy-bcm-ns-usb3.c:(.text.bcm_ns_usb3_mdiodev_phy_write+0x28): undefined reference to `mdiobus_write'
drivers/phy/broadcom/phy-bcm-ns-usb3.o: In function `bcm_ns_usb3_module_exit':
phy-bcm-ns-usb3.c:(.exit.text+0x18): undefined reference to `mdio_driver_unregister'
drivers/phy/broadcom/phy-bcm-ns-usb3.o: In function `bcm_ns_usb3_module_init':
phy-bcm-ns-usb3.c:(.init.text+0x18): undefined reference to `mdio_driver_register'
phy-bcm-ns-usb3.c:(.init.text+0x38): undefined reference to `mdio_driver_unregister'

Using 'depends on MDIO_BUS' instead will avoid the link error.

Fixes: af850e14a7 ("phy: bcm-ns-usb3: add MDIO driver using proper bus layer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-27 17:20:19 -07:00
Rafał Miłecki af850e14a7 phy: bcm-ns-usb3: add MDIO driver using proper bus layer
As USB 3.0 PHY is attached to the MDIO bus this module should provide a
MDIO driver and use a proper bus layer. This is a proper (cleaner)
solution which doesn't require code to know this specific MDIO bus
details. It also allows reusing the driver with other MDIO buses.

For now keep platform device support in place. We may consider dropping
it once MDIO bindings gets used "everywhere".

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-16 13:22:26 +05:30
Rafał Miłecki 4536adee0a phy: bcm-ns-usb3: enable MDIO in the platform specific code
When we finally start using MDIO layer then bus initialization will be
handled in a separated driver. It means our code handling this has to be
used for the platform driver only.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-16 13:22:26 +05:30
Rafał Miłecki b20f506f6c phy: bcm-ns-usb3: use pointer for PHY writing function
Our current writing function accesses PHY directly bypassing MDIO layer.

The aim is to extend this module to also behave as MDIO driver. This
will require using different writing function which can be handled
cleanly by having an extra pointer like this.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-16 13:22:25 +05:30
Rafał Miłecki 412512c4f9 phy: bcm-ns-usb3: always wait for idle after writing to the PHY reg
Move MDIO specific code to the writing helper function. This makes init
code a bit more generic and doesn't require it to track what happens
after every write.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-16 13:22:25 +05:30
Srinath Mannam 80886f7c69 phy: Add stingray SATA phy support
This patch adds support for stingray SATA phy in the
SATA BRCM phy driver.

Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-16 11:40:22 +05:30
Tony Lindgren 259a24001a phy: cpcap-usb: Fix missing return statement
Commit 8ae904e3c236 ("phy: cpcap-usb: Add CPCAP PMIC USB support")
is missing return statement as noted by Colin Ian King
<colin.king@canonical.com>. If the optional pins are not configured,
we just want to return early and not attempt to configure the pins.

Fixes: 8ae904e3c236 ("phy: cpcap-usb: Add CPCAP PMIC USB support")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-16 11:40:21 +05:30
Raviteja Garimella 787f24543c phy: phy-bcm-ns2-usbdrd: Broadcom USB DRD PHY driver for Northstar2
This is driver for USB DRD PHY used in Broadcom's Northstar2
SoC. The phy can be configured to be in Device mode or Host
mode based on the type of cable connected to the port. The
driver registers to  extcon framework to get appropriate
connect events for Host/Device cables connect/disconnect
states based on VBUS and ID interrupts.

Signed-off-by: Raviteja Garimella <raviteja.garimella@broadcom.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-09 17:39:39 +05:30
Arnd Bergmann d05c07c6fa phy: cpcap-usb: add MUSB dependency
When MUSB is a loadable module, we get a link error for a built-in
CPCAP driver:

drivers/phy/built-in.o: In function `cpcap_usb_phy_remove':
phy-cpcap-usb.c:(.text+0xed9): undefined reference to `musb_mailbox'

This adds a Kconfig dependency to prevent this broken configuration,
enforcing that CPCAP can only be a module when MUSB is also a module.

Fixes: 68a1f7c9d470 ("phy: cpcap-usb: Add CPCAP PMIC USB support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-09 17:39:39 +05:30
Felipe Balbi 54fe308889 phy: tusb1210: implement ->set_mode()
->set_mode() can be used to tell PHY to prepare itself to enter USB
Host/Peripheral mode and that's very important for DRD
configurations.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-09 17:39:39 +05:30
Felipe Balbi 82d9d5e0c0 phy: tusb1210: add support for TUSB1211
TUSB1211 is software compatible with TUSB1210 and as such we don't
need an entire new driver to control it. Let's add its product ID to
the existing TUSB1210 driver instead.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-09 17:39:39 +05:30
Yoshihiro Shimoda 7c7356bab8 phy: rcar-gen3-usb3: add support for R-Car Gen3 USB 3.0 PHY
The USB 3.0 PHY modules of R-Car Gen3 SoCs have:
 - Spread spectrum clock (ssc).
 - Using USB 2.0 EXTAL clock instead of USB 3.0 clock.
 - Enabling VBUS detection for usb3.0 peripheral.

So, this driver supports these features.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-07 17:55:13 +05:30
Frank Wang b59b1d3904 phy: rockchip-inno-usb2: add support of usb2-phy for rk3228 SoCs
This adds support usb2-phy for rk3228 SoCs and amend phy Documentation.

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-06 14:50:25 +05:30
William Wu 9632781122 phy: rockchip-inno-usb2: add one phy comprises with two host-ports support
At the current rockchip-inno-usb2 phy driver framework, it can
only support usb2-phy which comprises with one otg-port and one
host-port.

However, some Rockchip SoCs' (e.g RK3228, RK3229) usb2-phy comprises
with two host-ports, so we use index of otg id for one host-port
configuration, and make it work the same as otg-port host mode.

Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-06 14:50:24 +05:30
William Wu 5a74a8b742 phy: rockchip-inno-usb2: increase otg sm work first schedule time
In rockchip-inno-usb2 phy driver, we use otg_sm_work to
dynamically manage power consumption for phy otg-port.
If the otg-port works as peripheral mode and does not
communicate with usb host, we will suspend phy.

But once suspend phy, the phy no longer has any internal
clock running, include the utmi_clk which supplied for
usb controller. So if we suspend phy before usb controller
init, it will cause usb controller fail to initialize.

Specifically, without this patch, the observed order is:
 1. unplug usb cable
 2. start system, do dwc2 controller probe
 3. dwc2_lowlevel_hw_enable()
    - phy_init()
     - rockchip_usb2phy_init()
      - schedule otg_sm_work after 2s
        put phy in suspend, and close utmi_clk
 4. dwc2_hsotg_udc_start() - fail to initialize the usb core

Generally, dwc2_hsotg_udc_start() can be called within 5s
after start system on Rockchip platform, so we increase the
the first schedule delay time to 6s for otg_sm_work afer usb
controller calls phy_init(), this can make sure that the usb
controller completes initialization before phy enter suspend.

Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-06 14:50:23 +05:30
William Wu fbbe98cd44 phy: rockchip-inno-usb2: add a delay after phy resume
When resume phy, it need about 1.5 ~ 2ms to wait for
utmi_clk which used for USB controller to become stable.

Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-06 14:50:22 +05:30
Tony Lindgren 6d6ce40f63 phy: cpcap-usb: Add CPCAP PMIC USB support
Some Motorola phones like droid 4 use a custom CPCAP PMIC that has a
multiplexing USB PHY.

This USB PHY can operate at least in four modes using pin multiplexing
and two control GPIOS:

- Pass through companion PHY for the SoC USB PHY
- ULPI PHY for the SoC
- Pass through USB for the modem
- UART debug console for the SoC

This patch adds support for droid 4 USB PHY and debug UART modes,
support for other modes can be added later on as needed.

Both peripheral and host mode are working for the USB. The
host mode depends on the cpcap-charger driver for VBUS.

VBUS and ID pin detection are done using cpcap-adc IIO ADC
driver.

Cc: devicetree@vger.kernel.org
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-06 14:50:21 +05:30
Martin Blumenstingl 4a3449d1a0 phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs
Meson8 uses the same USB PHY as found on the Meson8b and GXBB SoCs. Add
a new of_device_id to indicate this. Also update the Kconfig option and
MODULE_DESCRIPTION accordingly.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-06 14:50:14 +05:30
Martin Blumenstingl 697b373c6d phy: meson: add USB2 PHY support for Meson GXL and GXM
This adds a new driver for the USB2 PHYs found on Meson GXL and GXM SoCs
(both SoCs are using the same USB PHY register layout).

The USB2 PHY is a simple PHY which only has a few registers to configure
the mode (host/device) and a reset register (to enable/disable the PHY).

Unfortunately there are no datasheets available for this PHY. The driver
was written by reading the code from Amlogic's GPL kernel sources and
by analyzing the registers on an actual GXL and GXM device running the
kernel that was shipped on the boards I have.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-06 14:49:47 +05:30
Vivek Gautam 0b56e9a7e8 phy: Group vendor specific phy drivers
Adding vendor specific directories in phy to group
phy drivers under their respective vendor umbrella.

Also updated the MAINTAINERS file to reflect the correct
directory structure for phy drivers.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-01 15:28:33 +05:30
Vivek Gautam 858edde001 phy: Move ULPI phy header out of drivers to include path
Although ULPI phy is currently being used by tusb1210,
there can be other consumers too in future. So move this
to the includes path for phy.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-01 15:28:27 +05:30
Vivek Gautam 706a3b6995 phy: qcom-usb: Remove unused ulpi phy header
Ulpi phy header is not used for anything. Remove the same
from qcom-hs and qcom-hsic phy drivers.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Suggested-by: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-01 15:28:24 +05:30
Fengguang Wu 9605bc4643 phy: qualcomm: phy-qcom-qmp: fix application of sizeof to pointer
drivers/phy/qualcomm/phy-qcom-qmp.c:847:37-43: ERROR: application of sizeof to pointer

 sizeof when applied to a pointer typed expression gives the size of
 the pointer

Generated by: scripts/coccinelle/misc/noderef.cocci

CC: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-01 15:03:41 +05:30
Wei Yongjun 53bf959015 phy: qcom-qmp: fix return value check in qcom_qmp_phy_create()
In case of error, the function of_iomap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should
be replaced with NULL test.

Fixes: e78f3d15e1 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-05-19 14:13:39 +05:30
Tobias Regnery 6239879b41 phy: qcom-qusb2: add NVMEM dependency
With CONFIG_NVMEM=m and CONFIG_PHY_QCOM_QUSB2=y we get a link error from
calls to devm_nvmem_cell_get and nvmem_cell_read:

drivers/built-in.o: In function `qusb2_phy_probe':
binder.c:(.text+0x4750): undefined reference to `devm_nvmem_cell_get'
drivers/built-in.o: In function `qusb2_phy_init':
binder.c:(.text+0x489c): undefined reference to `nvmem_cell_read'

Fix this by adding a Kconfig dependency to ensure we can only have this
driver built in when the nvmem functions are also built in or we see the
empty stub functions. We can still build this driver as a module when the
nvmem core is build as module, too.

Fixes: deffad633413 ("phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips")
Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10 16:43:41 +05:30
Sjoerd Simons 9d685ed77b phy: rockchip-usb: Add vbus regulator support.
On rockchip devices vbus is supplied by a separate power supply, often
through a regulator. Add support for describing the the regulator in
device-tree following the same convention as several other usb phy's.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10 16:43:41 +05:30
Rafał Miłecki fff3364a63 phy: bcm-ns-usb3: split all writes into reg & val pairs
So far all the PHY initialization was implemented using some totally
magic values. There was some pattern there but it wasn't clear what is
it about.

Thanks to the patch submitted by Broadcom:
[PATCH 5/6] phy: Add USB3 PHY support for Broadcom NSP SoC
and the upstream "iproc-mdio" driver we now know there is a MDIO bus
underneath with PHY(s) and their registers.

It allows us to clean the driver a bit by making all these values less
magical. The next step is switching to using a proper MDIO layer.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10 16:43:41 +05:30
Vivek Gautam e78f3d15e1 phy: qcom-qmp: new qmp phy driver for qcom-chipsets
Qualcomm SOCs have QMP phy controller that provides support
to a number of controller, viz. PCIe, UFS, and USB.
Add a new driver, based on generic phy framework, for this
phy controller.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10 16:43:41 +05:30
Vivek Gautam ca04d9d3e1 phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips
PHY transceiver driver for QUSB2 phy controller that provides
HighSpeed functionality for DWC3 controller present on
Qualcomm chipsets.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10 16:43:41 +05:30
Meng Dongyang d99b1ab323 phy: rockchip-inno-usb2: add support of usb2-phy for rk3328
Add usb2-phy config information in the data of match table for
rk3328.

Signed-off-by: Meng Dongyang <daniel.meng@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10 16:43:41 +05:30
Chunfeng Yun c0250fe50e phy: phy-mt65xx-usb3: disable 100uA extraction from SS port to HS port
There will be a problem if SS port is diasbled and HS port extracts
100uA from SS port, so disable extract 100uA from SS port in the case,
when disable it, PA0_RG_USB20_INTR_EN should be set, otherwise HS port
only works on LS.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10 16:43:40 +05:30
Chunfeng Yun 8d6e1957f1 phy: phy-mt65xx-usb3: add support for new version phy
There are some variations from mt2701 to mt2712:
1. banks shared by multiple ports are put back into each port,
    such as SPLLC and U2FREQ;
2. add a new bank MISC for u2port, and CHIP for u3port;
3. bank's offset in each port are also rearranged;

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10 16:43:40 +05:30
Chunfeng Yun 15de15c6b4 phy: phy-mt65xx-usb3: move clock from phy node into port nodes
each port has its own reference clock, the HighSpeed port is 48M,
and the SuperSpeed port is usually 26M, put them into port node for
flexibility, this can close clock if the port is not used.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10 16:43:40 +05:30
Chunfeng Yun 04466efca5 phy: phy-mt65xx-usb3: split SuperSpeed port into two ones
Currently usb3 port in fact includes two sub-ports, but it is not
flexible for some cases, such as following one:
    usb3 port0 includes u2port0 and u3port0;
    usb2 port0 includes u2port1;
If wants to support only HS, we can use u2port0 or u2port1, when
select u2port0, u3port0 is not needed;
If wants to support SS, we can compound u2port0 and u3port0,
or u2port1 and u3port0, if select latter one, u2port0 is not needed.

So it's more flexible to split usb3 port into two ones and also try
best to save power by disabling unnecessary ports.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10 16:43:40 +05:30
Chunfeng Yun 98cd83a056 phy: phy-mt65xx-usb3: increase LFPS filter threshold
Increase LFPS filter threshold to avoid some fake remote wakeup
signal which cause U3 link fail and link to U2 only at about
0.01% probability.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10 16:43:40 +05:30
Chunfeng Yun 1969f6952b phy: phy-mt65xx-usb3: improve RX detection stable time
The default value of RX detection stable time is 10us, and this
margin is too big for some critical cases which cause U3 link fail
and link to U2(probability is about 1%). So change it to 5us.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10 16:43:40 +05:30
Icenowy Zheng c957b7d236 phy: sun4i-usb: enable PHY0 dual route switching for A64 USB PHY
Allwinner A64 SoC features a switchable PHY0 like the one in H3, which
can switch between a MUSB controller and a pair of OHCI/EHCI controller.

Enable PHY0 route auto switching for A64.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10 16:43:40 +05:30
Yoshihiro Shimoda 441a681b88 phy: rcar-gen3-usb2: fix implementation for runtime PM
This patch fixes an issue that this driver doesn't take care of the runtime
PM. This code assumed that devm_phy_create() called pm_runtime_enable(dev),
but it misunderstood the dev_phy_create()'s specification.
This driver should call its own pm_runtime_enable() before
dev_phy_create().

Fixes: f3b5a8d9b5 ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10 16:43:40 +05:30
Colin Ian King 7dfa3026db phy: rockchip-inno-usb2: fix spelling mistake: "connecetd" -> "connected"
trivial fix to spelling mistake in dev_dbg message, also rejoin
lines to clean up checkpatch warning

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10 16:43:40 +05:30
Krzysztof Kozlowski 7a66647b25 phy: exynos: Use one define for enable bit
There is no need for separate defines for Exynos4 and Exynos5 phy enable
bit and MIPI phy reset bits.  In both cases there are the same so
simplify it.

This reduces number of defines and allows removal of one header file.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10 16:43:18 +05:30
Krzysztof Kozlowski cf09ee5997 phy: exynos-mipi-video: Use consistent method to address phy registers
Exynos4 MIPI phy registers are defined with macro calculating the offset
for given phyN.  Use the same method for Exynos5420 to be consistent.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10 16:43:05 +05:30
Krzysztof Kozlowski 424c984148 phy: exynos5: Remove duplicated defines of PHY register defines
Phy drivers access PMU region through regmap provided by exynos-pmu
driver.   However there is no need to duplicate defines for PMU
registers.  Instead just use whatever is defined in exynos-regs-pmu.h.

This reduces number of defines.

Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10 16:42:58 +05:30
Krzysztof Kozlowski 5812f0106c phy: exynos4: Remove duplicated defines of PHY register defines
Phy drivers access PMU region through regmap provided by exynos-pmu
driver.   However there is no need to duplicate defines for PMU
registers.  Instead just use whatever is defined in exynos-regs-pmu.h.

Additionally MIPI PHY registers for Exynos5433 start from the same
address as Exynos4 and Exynos5250 so re-use existing defines.

This reduces number of defines and allows removal of one header file.

Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10 16:42:58 +05:30
Martin Blumenstingl 5b85927e5c phy: meson8b-usb2: fix offsets for some of the registers
The register offsets for REG_DBG_UART (and all following) were off by
0x4. This was not a problem yet because these registers are currently
not used by the driver.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10 16:42:58 +05:30
Icenowy Zheng 3ecc25e12f phy: sun4i-usb: support automatically switch PHY0 route to MUSB/HCI
On newer Allwinner SoCs (H3 and after), the PHY0 node is routed to both
MUSB controller for peripheral and host support (the host support is
slightly broken), and a pair of EHCI/OHCI controllers, which provide a
better support for host mode.

Add support for automatically switch the route of PHY0 according to the
status of dr_mode and id det pin.

Only H3 have this function enabled in this patch, as further SoCs will
be tested later and then have it enabled.

As H5 is reusing the PHY driver of H3, this function is also enabled.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10 16:42:58 +05:30
Icenowy Zheng 864ebdf0bd phy: sun4i-usb: add PHYCTL offset for H3 SoC
The config structure of H3 in phy-sun4i-usb driver have the PHYCTL
register offset missing.

Add it. From the BSP source code, we know that the offset should be
0x10.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10 16:42:57 +05:30
Icenowy Zheng d699c1d086 phy: sun4i-usb: change PHYCTL register clearing code
It seems that all SoCs with the PHYCTL register offset as 0x10 need the
PHYCTL register to be cleared before it's written.

Change PHYCTL register clearing code to judge whether clearing is needed
based on the PHYCTL offset.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10 16:42:57 +05:30
Paul Gortmaker 4574a92c59 phy: phy-exynos-pcie: make it explicitly non-modular
The Kconfig currently controlling compilation of this code is:

drivers/phy/Kconfig:config PHY_EXYNOS_PCIE
drivers/phy/Kconfig:    bool "Exynos PCIe PHY driver"

...meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Pankaj Dubey <pankaj.dubey@samsung.com>
Cc: Vivek Gautam <vivek.gautam@codeaurora.org>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10 16:42:57 +05:30
Stephen Boyd 1a09b6a7c1 phy: qcom-usb-hs: Add depends on EXTCON
We get the following compile errors if EXTCON is enabled as a
module but this driver is builtin:

drivers/built-in.o: In function `qcom_usb_hs_phy_power_off':
phy-qcom-usb-hs.c:(.text+0x1089): undefined reference to `extcon_unregister_notifier'
drivers/built-in.o: In function `qcom_usb_hs_phy_probe':
phy-qcom-usb-hs.c:(.text+0x11b5): undefined reference to `extcon_get_edev_by_phandle'
drivers/built-in.o: In function `qcom_usb_hs_phy_power_on':
phy-qcom-usb-hs.c:(.text+0x128e): undefined reference to `extcon_get_state'
phy-qcom-usb-hs.c:(.text+0x12a9): undefined reference to `extcon_register_notifier'

so let's mark this as needing to follow the modular status of
the extcon framework.

Fixes: 9994a33865 e2427b09ba (phy: Add support for Qualcomm's USB HS phy")
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-03-09 15:29:57 +05:30
Jaehoon Chung 11d94e026b phy: phy-exynos-pcie: fix the wrong error return
When it doesn't get the blk_base's resource, it was returned
the error about phy_base, not blk_base.
This patch is for fixing the wrong error return about blk_base.

Fixes: cf0adb8e28 ("phy: phy-exynos-pcie: Add support for Exynos PCIe PHY")

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-03-09 15:29:57 +05:30