Commit Graph

149 Commits

Author SHA1 Message Date
Alexey Dobriyan f18e439d10 genirq: switch /proc/irq/*/smp_affinity et al to seqfiles
Switch /proc/irq/*/smp_affinity , /proc/irq/default_smp_affinity to
seq_files.

cat(1) reads with 1024 chunks by default, with high enough NR_CPUS, there
will be -EINVAL.

As side effect, there are now two less users of the ->read_proc interface.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Mike Travis <travis@sgi.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-12 16:07:30 -07:00
David Brownell c69ad71bcd genirq: better warning on irqchip->set_type() failure
While I'm glad to finally see the hole fixed whereby passing an invalid
IRQ trigger type to request_irq() would be ignored, the current diagnostic
isn't quite useful.  Fixed by also listing the trigger type which was
rejected.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-05 14:33:47 -07:00
Arjan van de Ven 261c40c119 use WARN() in kernel/irq/chip.c
Use WARN() instead of a printk+WARN_ON() pair; this way the message
becomes part of the warning section for better reporting/collection.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:07 -07:00
Arjan van de Ven b8c512f619 Use WARN() in kernel/irq/manage.c
Replace a printk+WARN_ON() by a WARN(); this increases the chance of the
string making it into the bugreport (ie: it goes inside the
---[ cut here ]--- section)

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:07 -07:00
Arjan van de Ven 7a2c477069 kernel/irq/manage.c: replace a printk + WARN_ON() to a WARN()
Replace a printk+WARN_ON() by a WARN(); this increases the chance of the
string making it into the bugreport (ie: it goes inside the
---[ cut here ]--- section)

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:29 -07:00
Uwe Kleine-König 82736f4d1d generic irqs: handle failure of irqchip->set_type in setup_irq
set_type returns an int indicating success or failure, but up to now
setup_irq ignores that.

In my case this resulted in a machine hang:

gpio-keys requested IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, but
arm/ns9xxx can only trigger on one direction so set_type didn't touch
the configuration which happens do default to a level sensitiveness and
returned -EINVAL.  setup_irq ignored that and unmasked the irq.  This
resulted in an endless triggering of the gpio-key interrupt service
routine which effectively killed the machine.

With this patch applied setup_irq propagates the error to the caller.

Note that before in the case

	chip && !chip->set_type && !chip->name

a NULL pointer was feed to printk.  This is fixed, too.

Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:24 -07:00
Uwe Kleine-König 2db873211b set_irq_wake: fix return code and wake status tracking
Since 15a647eba9 set_irq_wake returned -ENXIO
if another device had it already enabled.  Zero is the right value to
return in this case.  Moreover the change to desc->status was not reverted
if desc->chip->set_wake returned an error.

Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23 09:35:53 -07:00
Thomas Gleixner 48627d8d23 genirq: remove extraneous checks in manage.c
In http://bugzilla.kernel.org/show_bug.cgi?id=9580 it was pointed out
that the desc->chip checks are extraneous. In fact these are left
overs from early development and can be removed safely.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-07-10 07:01:13 +02:00
Max Krasnyansky 1840475676 genirq: Expose default irq affinity mask (take 3)
Current IRQ affinity interface does not provide a way to set affinity
for the IRQs that will be allocated/activated in the future.
This patch creates /proc/irq/default_smp_affinity that lets users set
default affinity mask for the newly allocated IRQs. Changing the default
does not affect affinity masks for the currently active IRQs, they
have to be changed explicitly.

Updated based on Paul J's comments and added some more documentation.

Signed-off-by: Max Krasnyansky <maxk@qualcomm.com>
Cc: pj@sgi.com
Cc: a.p.zijlstra@chello.nl
Cc: tglx@linutronix.de
Cc: rdunlap@xenotime.net
Cc: mingo@elte.hu
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-06-05 15:18:30 +02:00
Thomas Gleixner 1adb0850a1 genirq: reenable a nobody cared disabled irq when a new driver arrives
Uwe Kleine-Koenig has some strange hardware where one of the shared
interrupts can be asserted during boot before the appropriate driver
loads. Requesting the shared irq line from another driver result in a
spurious interrupt storm which finally disables the interrupt line.

I have seen similar behaviour on resume before (the hardware does not
work anymore so I can not verify).

Change the spurious disable logic to increment the disable depth and
mark the interrupt with an extra flag which allows us to reenable the
interrupt when a new driver arrives which requests the same irq
line. In the worst case this will disable the irq again via the
spurious trap, but there is a decent chance that the new driver is the
one which can handle the already asserted interrupt and makes the box
usable again.

Eric Biederman said further: This case also happens on a regular basis
in kdump kernels where we deliberately don't shutdown the hardware
before starting the new kernel.  This patch should reduce the need for
using irqpoll in that situation by a small amount.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-and-Acked-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
2008-05-02 13:40:34 +02:00
Robert P. J. Day 1aeb272cf0 kernel: explicitly include required header files under kernel/
Following an experimental deletion of the unnecessary directive

 #include <linux/slab.h>

from the header file <linux/percpu.h>, these files under kernel/ were exposed
as needing to include one of <linux/slab.h> or <linux/gfp.h>, so explicit
includes were added where necessary.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:04 -07:00
Mike Travis d366f8cbc1 cpumask: Cleanup more uses of CPU_MASK and NODE_MASK
*  Replace usages of CPU_MASK_NONE, CPU_MASK_ALL, NODE_MASK_NONE,
    NODE_MASK_ALL to reduce stack requirements for large NR_CPUS
    and MAXNODES counts.

 *  In some cases, the cpumask variable was initialized but then overwritten
    with another value.  This is the case for changes like this:

    -       cpumask_t oldmask = CPU_MASK_ALL;
    +       cpumask_t oldmask;

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:44:58 +02:00
Thomas Gleixner 89d694b9db genirq: do not leave interupts enabled on free_irq
The default_disable() function was changed in commit:

 76d2160147
 genirq: do not mask interrupts by default

It removed the mask function in favour of the default delayed
interrupt disabling. Unfortunately this also broke the shutdown in
free_irq() when the last handler is removed from the interrupt for
those architectures which rely on the default implementations. Now we
can end up with a enabled interrupt line after the last handler was
removed, which can result in spurious interrupts.

Fix this by adding a default_shutdown function, which is only
installed, when the irqchip implementation does provide neither a
shutdown nor a disable function.

[@stable: affected versions: .21 - .24 ]

Pointed-out-by: Michael Hennerich <Michael.Hennerich@analog.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: stable@kernel.org
Tested-by: Michael Hennerich <Michael.Hennerich@analog.com>
2008-02-19 10:43:58 +01:00
S.Caglar Onur 188fd89d53 genirq: spurious.c: use time_* macros
The functions time_before, time_before_eq, time_after, and
time_after_eq are more robust for comparing jiffies against other
values.

So following patch implements usage of the time_after() macro, defined
at linux/jiffies.h, which deals with wrapping correctly

Signed-off-by: S.Caglar Onur <caglar@pardus.org.tr>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-19 10:43:58 +01:00
Ralf Baechle 46f4f8f665 IRQ_NOPROBE helper functions
Probing non-ISA interrupts using the handle_percpu_irq as their handle_irq
method may crash the system because handle_percpu_irq does not check
IRQ_WAITING.  This for example hits the MIPS Qemu configuration.

This patch provides two helper functions set_irq_noprobe and set_irq_probe to
set rsp.  clear the IRQ_NOPROBE flag.  The only current caller is MIPS code
but this really belongs into generic code.

As an aside, interrupt probing these days has become a mostly obsolete if not
dangerous art.  I think Linux interrupts should be changed to default to
non-probing but that's subject of this patch.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-and-tested-by: Rob Landley <rob@landley.net>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:42 -08:00
Harvey Harrison 7ad5b3a505 kernel: remove fastcall in kernel/*
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:31 -08:00
Ingo Molnar 70edcd77a0 genirq: stackdump after the "Trying to free already-free IRQ" message
these bugs are harder to find than they seem, a stackdump helps.

make it dependent on CONFIG_DEBUG_SHIRQ so that people can turn it off
if it annoys them.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:24 +01:00
Andi Kleen 96d97cf03b x86: add /proc/irq/*/spurious to dump the spurious irq debugging state
This is useful to debug problems with interrupt handlers that return
sometimes IRQ_NONE.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:48 +01:00
Andi Kleen 9e094c17ee genirq: turn irq debugging options into module params
This allows to change them at runtime using sysfs. No need to
reboot to set them.

I only added aliases (kernel.noirqdebug etc.) so the old options
still work.

Signed-off-by: Andi Kleen <ak@suse.de>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:48 +01:00
Steven Rostedt 971e5b35fb genirq: revert lazy irq disable for simple irqs
In commit 76d2160147 lazy irq disabling
was implemented, and the simple irq handler had a masking set to it.

Remy Bohmer discovered that some devices in the ARM architecture
would trigger the mask, but never unmask it. His patch to do the
unmasking was questioned by Russell King about masking simple irqs
to begin with. Looking further, it was discovered that the problems
Remy was seeing was due to improper use of the simple handler by
devices, and he later submitted patches to fix those. But the issue
that was uncovered was that the simple handler should never mask.

This patch reverts the masking in the simple handler.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-12-18 18:05:58 +01:00
Russ Anderson c642b8391c __do_IRQ does not check IRQ_DISABLED when IRQ_PER_CPU is set
In __do_IRQ(), the normal case is that IRQ_DISABLED is checked and if set
the handler (handle_IRQ_event()) is not called.

Earlier in __do_IRQ(), if IRQ_PER_CPU is set the code does not check
IRQ_DISABLED and calls the handler even though IRQ_DISABLED is set.  This
behavior seems unintentional.

One user encountering this behavior is the CPE handler (in
arch/ia64/kernel/mca.c).  When the CPE handler encounters too many CPEs
(such as a solid single bit error), it sets up a polling timer and disables
the CPE interrupt (to avoid excessive overhead logging the stream of single
bit errors).  disable_irq_nosync() is called which sets IRQ_DISABLED.  The
IRQ_PER_CPU flag was previously set (in ia64_mca_late_init()).  The net
result is the CPE handler gets called even though it is marked disabled.

If the behavior of not checking IRQ_DISABLED when IRQ_PER_CPU is set is
intentional, it would be worthy of a comment describing the intended
behavior.  disable_irq_nosync() does call chip->disable() to provide a
chipset specifiec interface for disabling the interrupt, which avoids this
issue when used.

Signed-off-by: Russ Anderson <rja@sgi.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:43 -08:00
Herbert Xu a98ce5c6fe Fix synchronize_irq races with IRQ handler
As it is some callers of synchronize_irq rely on memory barriers
to provide synchronisation against the IRQ handlers.  For example,
the tg3 driver does

	tp->irq_sync = 1;
	smp_mb();
	synchronize_irq();

and then in the IRQ handler:

	if (!tp->irq_sync)
		netif_rx_schedule(dev, &tp->napi);

Unfortunately memory barriers only work well when they come in
pairs.  Because we don't actually have memory barriers on the
IRQ path, the memory barrier before the synchronize_irq() doesn't
actually protect us.

In particular, synchronize_irq() may return followed by the
result of netif_rx_schedule being made visible.

This patch (mostly written by Linus) fixes this by using spin
locks instead of memory barries on the synchronize_irq() path.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23 09:01:31 -07:00
Ralf Baechle 28e3fed8b7 Compile handle_percpu_irq even for uniprocessor kernels
Compiling handle_percpu_irq only on uniprocessor generates an artificial
special case so a typical use like:

  set_irq_chip_and_handler(irq, &some_irq_type, handle_percpu_irq);

needs to be conditionally compiled only on SMP systems as well and an
alternative UP construct is usually needed - for no good reason.

This fixes uniprocessor configurations for some MIPS SMP systems.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:43:00 -07:00
David Woodhouse 1d99493b3a Fix CONFIG_DEBUG_SHIRQ trigger on free_irq()
Andy Gospodarek pointed out that because we return in the middle of the
free_irq() function, we never actually do call the IRQ handler that just
got deregistered. This should fix it, although I expect Andrew will want
to convert those 'return's to 'break'. That's a separate change though.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Fernando Luis Vzquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:49 -07:00
Jarek Poplawski 59845b1ffd request_irq: fix DEBUG_SHIRQ handling
Mariusz Kozlowski reported lockdep's warning:

> =================================
> [ INFO: inconsistent lock state ]
> 2.6.23-rc2-mm1 #7
> ---------------------------------
> inconsistent {in-hardirq-W} -> {hardirq-on-W} usage.
> ifconfig/5492 [HC0[0]:SC0[0]:HE1:SE1] takes:
>  (&tp->lock){+...}, at: [<de8706e0>] rtl8139_interrupt+0x27/0x46b [8139too]
> {in-hardirq-W} state was registered at:
>   [<c0138eeb>] __lock_acquire+0x949/0x11ac
>   [<c01397e7>] lock_acquire+0x99/0xb2
>   [<c0452ff3>] _spin_lock+0x35/0x42
>   [<de8706e0>] rtl8139_interrupt+0x27/0x46b [8139too]
>   [<c0147a5d>] handle_IRQ_event+0x28/0x59
>   [<c01493ca>] handle_level_irq+0xad/0x10b
>   [<c0105a13>] do_IRQ+0x93/0xd0
>   [<c010441e>] common_interrupt+0x2e/0x34
...
> other info that might help us debug this:
> 1 lock held by ifconfig/5492:
>  #0:  (rtnl_mutex){--..}, at: [<c0451778>] mutex_lock+0x1c/0x1f
>
> stack backtrace:
...
>  [<c0452ff3>] _spin_lock+0x35/0x42
>  [<de8706e0>] rtl8139_interrupt+0x27/0x46b [8139too]
>  [<c01480fd>] free_irq+0x11b/0x146
>  [<de871d59>] rtl8139_close+0x8a/0x14a [8139too]
>  [<c03bde63>] dev_close+0x57/0x74
...

This shows that a driver's irq handler was running both in hard interrupt
and process contexts with irqs enabled. The latter was done during
free_irq() call and was possible only with CONFIG_DEBUG_SHIRQ enabled.
This was fixed by another patch.

But similar problem is possible with request_irq(): any locks taken from
irq handler could be vulnerable - especially with soft interrupts. This
patch fixes it by disabling local interrupts during handler's run. (It
seems, disabling softirqs should be enough, but it needs more checking
on possible races or other special cases).

Reported-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Jarek Poplawski <jarkao2@o2.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-31 01:42:23 -07:00
Andrew Morton 8b7f07155f free_irq(): fix DEBUG_SHIRQ handling
If we're going to run the handler from free_irq() then we must do it with
local irq's disabled.  Otherwise lockdep complains that the handler is taking
irq-safe spinlocks in a non-irq-safe fashion.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:44 -07:00
Thomas Gleixner 2464286ace genirq: suppress resend of level interrupts
Level type interrupts are resent by the interrupt hardware when they are
still active at irq_enable().

Suppress the resend mechanism for interrupts marked as level.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-12 11:05:45 -07:00
Thomas Gleixner 496634217e genirq: cleanup mismerge artifact
Commit 5a43a066b11ac2fe84cf67307f20b83bea390f83: "genirq: Allow fasteoi
handler to retrigger disabled interrupts" was erroneously applied to
handle_level_irq().  This added the irq retrigger / resend functionality
to the level irq handler.

Revert the offending bits.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-12 11:05:45 -07:00
Linus Torvalds 88ffc35059 Revert "genirq: temporary fix for level-triggered IRQ resend"
This reverts commit 0fc4969b86.  It was
always meant to be temporary, but it's generating more useless noise
than anything else, and we probably should never have done it in the
generic kernel (only had the people involved test it on their own).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-09 08:10:16 -07:00
Thomas Gleixner 0fc4969b86 genirq: temporary fix for level-triggered IRQ resend
Marcin Slusarz reported a ne2k-pci "hung network interface" regression.

delayed disable relies on the ability to re-trigger the interrupt in the
case that a real interrupt happens after the software disable was set.
In this case we actually disable the interrupt on the hardware level
_after_ it occurred.

On enable_irq, we need to re-trigger the interrupt. On i386 this relies
on a hardware resend mechanism (send_IPI_self()).

Actually we only need the resend for edge type interrupts. Level type
interrupts come back once enable_irq() re-enables the interrupt line.

I assume that the interrupt in question is level triggered because it is
shared and above the legacy irqs 0-15:

	17:         12   IO-APIC-fasteoi   eth1, eth0

Looking into the IO_APIC code, the resend via send_IPI_self() happens
unconditionally. So the resend is done for level and edge interrupts.
This makes the problem more mysterious.

The code in question lib8390.c does

	disable_irq();
	fiddle_with_the_network_card_hardware()
	enable_irq();

The fiddle_with_the_network_card_hardware() might cause interrupts,
which are cleared in the same code path again,

Marcin found that when he disables the irq line on the hardware level
(removing the delayed disable) the card is kept alive.

So the difference is that we can get a resend on enable_irq, when an
interrupt happens during the time, where we are in the disabled region.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-01 20:46:22 -07:00
Al Viro 0af3678f7c rip some includes from linux/interrupt.h
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-28 19:42:22 -07:00
Andi Kleen 42ee2b7414 x86_64: Report the pending irq if available in smp_affinity
Otherwise smp_affinity would only update after the next interrupt
on x86 systems.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-21 18:37:07 -07:00
Alan Cox 4f27c00bf8 Improve behaviour of spurious IRQ detect
Currently we handle spurious IRQ activity based upon seeing a lot of
invalid interrupts, and we clear things back on the base of lots of valid
interrupts.

Unfortunately in some cases you get legitimate invalid interrupts caused by
timing asynchronicity between the PCI bus and the APIC bus when disabling
interrupts and pulling other tricks.  In this case although the spurious
IRQs are not a problem our unhandled counters didn't clear and they act as
a slow running timebomb.  (This is effectively what the serial port/tty
problem that was fixed by clearing counters when registering a handler
showed up)

It's easy enough to add a second parameter - time.  This means that if we
see a regular stream of harmless spurious interrupts which are not harming
processing we don't go off and do something stupid like disable the IRQ
after a month of running.  OTOH lockups and performance killers show up a
lot more than 10/second

[akpm@linux-foundation.org: cleanup]
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:46 -07:00
Linus Torvalds 92ea77275b Fix crash with irqpoll due to the IRQF_IRQPOLL flag testing
With irqpoll enabled, trying to test the IRQF_IRQPOLL flag in the
actions would cause a NULL pointer dereference if no action was
installed (for example, the driver might have been unloaded with
interrupts still pending).

So be a bit more careful about testing the flag by making sure to test
for that case.

(The actual _change_ is trivial, the patch is more than a one-liner
because I rewrote the testing to also be much more readable.

Original (discarded) bugfix by Bernhard Walle.

Cc: Bernhard Walle <bwalle@suse.de>
Tested-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-24 08:37:14 -07:00
John Keller 25d61578da [IA64] SN: validate smp_affinity mask on intr redirect
On SN, only allow one bit to be set in the smp_affinty mask when
redirecting an interrupt.  Currently setting multiple bits is allowed, but
only the first bit is used in determining the CPU to redirect to.  This has
caused confusion among some customers.

[akpm@linux-foundation.org: fixes]
Signed-off-by: John Keller <jpk@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-05-11 09:35:38 -07:00
Jeff Dike cb0c78cc94 Fix Linuxdoc comment
A linuxdoc comment had fallen out of date - it refers to an argument which no
longer exists.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:48 -07:00
Bernhard Walle d85a60d85e Add IRQF_IRQPOLL flag (common code)
irqpoll is broken on some architectures that don't use the IRQ 0 for the timer
interrupt like IA64.  This patch adds a IRQF_IRQPOLL flag.

Each architecture is handled in a separate pach.  As I left the irq == 0 as
condition, this should not break existing architectures that use timer_irq ==
0 and that I did't address with that patch (because I don't know).

This patch:

This patch adds a IRQF_IRQPOLL flag that the interrupt registration code could
use for the interrupt it wants to use for IRQ polling.

Because this must not be the timer interrupt, an additional flag was added
instead of re-using the IRQF_TIMER constant.  Until all architectures will
have an IRQF_IRQPOLL interrupt, irq == 0 will stay as alternative as it should
not break anything.

Also, note_interrupt() is called on CPU-specific interrupts to be used as
interrupt source for IRQ polling.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Grant Grundler <grundler@google.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:22 -07:00
Ravikiran G Thirumalai e729aa16b1 Pad irq_desc to internode cacheline size
We noticed a drop in n/w performance due to the irq_desc being cacheline
aligned rather than internode aligned.  We see 50% of expected performance
when two e1000 nics local to two different nodes have consecutive irq
descriptors allocated, due to false sharing.

Note that this patch does away with cacheline padding for the UP case, as
it does not seem useful for UP configurations.

Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:09 -07:00
Ahmed S. Darwish f75d222b83 IRQ: check for PERCPU flag only when adding first irqaction
An irqaction structure won't be added to an IRQ descriptor irqaction list if
it doesn't agree with other irqactions on the IRQF_PERCPU flag.  Don't check
for this flag to change IRQ descriptor `status' for every irqaction added to
the list, Doing the check only for the first irqaction added is enough.

Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:06 -07:00
Dmitry Adamushko d2d9433a4c kernel/irq/proc.c: unprotected iteration over the IRQ action list in name_unique()
setup_irq() releases a desc->lock before calling register_handler_proc(), so
the iteration over the IRQ action list is not protected.

(akpm: the check itself is still racy, but at least it probably won't oops
now).

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:05 -07:00
Michael Ellerman 7fe3730de7 MSI: arch must connect the irq and the msi_desc
set_irq_msi() currently connects an irq_desc to an msi_desc. The archs call
it at some point in their setup routine, and then the generic code sets up the
reverse mapping from the msi_desc back to the irq.

set_irq_msi() should do both connections, making it the one and only call
required to connect an irq with it's MSI desc and vice versa.

The arch code MUST call set_irq_msi(), and it must do so only once it's sure
it's not going to fail the irq allocation.

Given that there's no need for the arch to return the irq anymore, the return
value from the arch setup routine just becomes 0 for success and anything else
for failure.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:38 -07:00
Tejun Heo 7f30e49ee1 [PATCH] irq-devres: fix failure path of devm_request_irq()
devres should be deallocated with devres_free() not kfree().  This bug
corrupts slab on IRQ request failure.  Fix it.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg KH <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-07 10:05:21 -07:00
Eric W. Biederman 2a786b452e [PATCH] genirq: Mask irqs when migrating them.
move_native_irqs tries to do the right thing when migrating irqs
by disabling them.  However disabling them is a software logical
thing, not a hardware thing.  This has always been a little flaky
and after Ingo's latest round of changes it is guaranteed to not
mask the apic.

So this patch fixes move_native_irq to directly call the mask and
unmask chip methods to guarantee that we mask the irq when we
are migrating it.  We must do this as it is required by
all code that call into the path.

Since we don't know the masked status when IRQ_DISABLED is
set so we will not be able to restore it.   The patch makes the code
just give up and trying again the next time this routing is called.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-26 10:34:08 -08:00
Jan Beulich 5575ddf75c [PATCH] small irq management simplification
Use mask_ack_irq() where possible.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:14:00 -08:00
Randy Dunlap 472900b8b0 [PATCH] IRQ kernel-doc fixes
Fix kernel-doc warnings in IRQ management.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:14:00 -08:00
Ingo Molnar 76d2160147 [PATCH] genirq: do not mask interrupts by default
Never mask interrupts immediately upon request.  Disabling interrupts in
high-performance codepaths is rare, and on the other hand this change could
recover lost edges (or even other types of lost interrupts) by conservatively
only masking interrupts after they happen.  (NOTE: with this change the
highlevel irq-disable code still soft-disables this IRQ line - and if such an
interrupt happens then the IRQ flow handler keeps the IRQ masked.)

Mark i8529A controllers as 'never loses an edge'.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:14:00 -08:00
Thomas Gleixner 771ee3b04e [PATCH] Add a function to handle interrupt affinity setting
Provide funtions to:
 - check, whether an interrupt can set the affinity
 - pin the interrupt to a given cpu

Necessary for the ability to setup clocksources more flexible (e.g.  use the
different HPET channels per CPU)

[akpm@osdl.org: alpha build fix]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:56 -08:00
Thomas Gleixner 950f4427c2 [PATCH] Add irq flag to disable balancing for an interrupt
Add a flag so we can prevent the irq balancing of an interrupt.  Move the
bits, so we have room for more :)

Necessary for the ability to setup clocksources more flexible (e.g.  use the
different HPET channels per CPU)

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:56 -08:00
Thomas Gleixner 38515e908b [PATCH] Scheduled removal of SA_xxx interrupt flags fixups
The obsolete SA_xxx interrupt flags have been used despite the scheduled
removal.  Fixup the remaining users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Greg KH <greg@kroah.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00
Alan Cox 3f05044715 [PATCH] kernel: shut up the IRQ mismatch messages
The problem is various drivers legally validly and sensibly try to claim
IRQs but the kernel insists on vomiting forth a giant irrelevant debugging
spew when the types clash.

Edit kernel/irq/manage.c go down to mismatch: in setup_irq() and ifdef out
the if clause that checks for mismatches.  It'll then just do the right
thing and work sanely.

For the current -mm kernel this will do the trick (and moves it into shared
irq debugging as in debug mode the info spew is useful).  I've had a
variant of this in my private tree for some time as I got fed up on the
mess on boxes where old legacy IRQs get reused.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:28 -08:00