Commit Graph

71 Commits

Author SHA1 Message Date
Jason Baron e9d376f0fa dynamic debug: combine dprintk and dynamic printk
This patch combines Greg Bank's dprintk() work with the existing dynamic
printk patchset, we are now calling it 'dynamic debug'.

The new feature of this patchset is a richer /debugfs control file interface,
(an example output from my system is at the bottom), which allows fined grained
control over the the debug output. The output can be controlled by function,
file, module, format string, and line number.

for example, enabled all debug messages in module 'nf_conntrack':

echo -n 'module nf_conntrack +p' > /mnt/debugfs/dynamic_debug/control

to disable them:

echo -n 'module nf_conntrack -p' > /mnt/debugfs/dynamic_debug/control

A further explanation can be found in the documentation patch.

Signed-off-by: Greg Banks <gnb@sgi.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:38:26 -07:00
H. Peter Anvin 0f5e2d2484 bzip2/lzma: handle failures from bzip2 and lzma correctly
Impact: Bug fix

If bzip2 or lzma fails (for example, if they aren't installed on the
system), we need to propagate the failure out to "make".  However,
they were masked by being followed by a semicolon.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-01-04 15:53:35 -08:00
Alain Knaff bc22c17e12 bzip2/lzma: library support for gzip, bzip2 and lzma decompression
Impact: Replaces inflate.c with a wrapper around zlib_inflate; new library code

This is the first part of the bzip2/lzma patch

The bzip patch is based on an idea by Christian Ludwig, includes support for
compressing the kernel with bzip2 or lzma rather than gzip. Both
compressors give smaller sizes than gzip.  Lzma's decompresses faster
than bzip2.

It also supports ramdisks and initramfs' compressed using these two
compressors.

The functionality has been successfully used for a couple of years by
the udpcast project

This version applies to "tip" kernel 2.6.28

This part contains:
- changed inflate.c to accomodate rest of patch
- implementation of bzip2 compression (not used at this stage yet)
- implementation of lzma compression (not used at this stage yet)
- Makefile routines to support bzip2 and lzma kernel compression

Signed-off-by: Alain Knaff <alain@knaff.lu>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-01-04 15:53:34 -08:00
Sam Ravnborg d8672b40d3 kbuild: expand -I in KBUILD_CPPFLAGS
kbuild failed to expand include flags in KBUILD_CPPFLAGS
resulting in code like this in arch Makefiles:

ifeq ($(KBUILD_SRC),)
KBUILD_CPPFLAGS += -Iinclude/foo
else
KBUILD_CPPFLAGS += -I$(srctree)/include/foo
endif

Move use of LINUXINCLUDE into Makefile.lib to allow
us to expand -I directives of KBUILD_CPPFLAGS so
we can avoid the above code.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-03 21:31:59 +01:00
Jason Baron 346e15beb5 driver core: basic infrastructure for per-module dynamic debug messages
Base infrastructure to enable per-module debug messages.

I've introduced CONFIG_DYNAMIC_PRINTK_DEBUG, which when enabled centralizes
control of debugging statements on a per-module basis in one /proc file,
currently, <debugfs>/dynamic_printk/modules. When, CONFIG_DYNAMIC_PRINTK_DEBUG,
is not set, debugging statements can still be enabled as before, often by
defining 'DEBUG' for the proper compilation unit. Thus, this patch set has no
affect when CONFIG_DYNAMIC_PRINTK_DEBUG is not set.

The infrastructure currently ties into all pr_debug() and dev_dbg() calls. That
is, if CONFIG_DYNAMIC_PRINTK_DEBUG is set, all pr_debug() and dev_dbg() calls
can be dynamically enabled/disabled on a per-module basis.

Future plans include extending this functionality to subsystems, that define 
their own debug levels and flags.

Usage:

Dynamic debugging is controlled by the debugfs file, 
<debugfs>/dynamic_printk/modules. This file contains a list of the modules that
can be enabled. The format of the file is as follows:

	<module_name> <enabled=0/1>
		.
		.
		.

	<module_name> : Name of the module in which the debug call resides
	<enabled=0/1> : whether the messages are enabled or not

For example:

	snd_hda_intel enabled=0
	fixup enabled=1
	driver enabled=0

Enable a module:

	$echo "set enabled=1 <module_name>" > dynamic_printk/modules

Disable a module:

	$echo "set enabled=0 <module_name>" > dynamic_printk/modules

Enable all modules:

	$echo "set enabled=1 all" > dynamic_printk/modules

Disable all modules:

	$echo "set enabled=0 all" > dynamic_printk/modules

Finally, passing "dynamic_printk" at the command line enables
debugging for all modules. This mode can be turned off via the above
disable command.

[gkh: minor cleanups and tweaks to make the build work quietly]

Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16 09:24:47 -07:00
Steven Rostedt 656ee82cc8 kbuild: create new CFLAGS_REMOVE_(basename).o option
We currently have a way to add special CFLAGS to code, but we do not have a
way to remove them if needed.

With the case of ftrace, some files should simply not be profiled. Adding
the -pg flag to these files is simply a waste, and adding "notrace" to each
and every function is ugly.

Currently we put in "Makefile turd" [1] to stop the compiler from adding -pg
to certain files. This was clumsy and awkward.

This patch now adds the revese of CFLAGS_(basename).o with
CFLAGS_REMOVE_(basename).o.  This allows developers to prevent certain
CFLAGS from being used to compile files. For example, we can now do

CFLAGS_REMOVE_string.o = -pg

to remove the -pg option from the string.o file in the lib directory.

Note: a space delimited list of options may be added to the REMOVE macro.

[1] - what David Miller called the workaronud to remove -pg

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23 22:43:33 +02:00
Tejun Heo 551559e13a kbuild: implement modules.order
When multiple built-in modules (especially drivers) provide the same
capability, they're prioritized by link order specified by the order
listed in Makefile.  This implicit ordering is lost for loadable
modules.

When driver modules are loaded by udev, what comes first in
modules.alias file is selected.  However, the order in this file is
indeterministic (depends on filesystem listing order of installed
modules).  This causes confusion.

The solution is two-parted.  This patch updates kbuild such that it
generates and installs modules.order which contains the name of
modules ordered according to Makefile.  The second part is update to
depmod such that it generates output files according to this file.

Note that both obj-y and obj-m subdirs can contain modules and
ordering information between those two are lost from beginning.
Currently obj-y subdirs are put before obj-m subdirs.

Sam Ravnborg cleaned up Makefile modifications and suggested using awk
to remove duplicate lines from modules.order instead of using separate
C program.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Bill Nottingham <notting@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Jon Masters <jonathan@jonmasters.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:35 +01:00
Sam Ravnborg f77bf01425 kbuild: introduce ccflags-y, asflags-y and ldflags-y
Introduce ccflags-y, asflags-y and ldflags-y so we soon can
deprecate use of EXTRA_CFLAGS, EXTRA_AFLAGS and EXTRA_LDFLAGS.
This patch does not touch any in-tree users - thats next round.
Lets get this committed first and then fix the users of the
soon to be deprecated variants next.

The rationale behind this change is to introduce support for
makefile fragments like:

ccflags-$(CONFIG_WHATEVER_DEBUG) := -DDEBUG

As a replacement for the uglier:
ifeq ($(CONFIG_WHATEVER_DEBUG),y)
        EXTRA_CFLAGS := -DDEBUG
endif

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-15 22:25:06 +02:00
Sam Ravnborg 06c5040cdb kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP
The variable CPPFLAGS is a wellknown variable and the usage by
kbuild may result in unexpected behaviour.

This patch replace use of CPPFLAGS with KBUILD_CPPFLAGS all over the
tree and enabling one to use:
make CPPFLAGS=...
to specify additional CPP commandline options.

Patch was tested on following architectures:
alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k, s390

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-15 22:17:25 +02:00
Sam Ravnborg 222d394d30 kbuild: enable 'make AFLAGS=...' to add additional options to AS
The variable AFLAGS is a wellknown variable and the usage by
kbuild may result in unexpected behaviour.
On top of that several people over time has asked for a way to
pass in additional flags to gcc.

This patch replace use of AFLAGS with KBUILD_AFLAGS all over
the tree.

Patch was tested on following architectures:
alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k, s390

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-15 21:59:31 +02:00
Sam Ravnborg a0f97e06a4 kbuild: enable 'make CFLAGS=...' to add additional options to CC
The variable CFLAGS is a wellknown variable and the usage by
kbuild may result in unexpected behaviour.
On top of that several people over time has asked for a way to
pass in additional flags to gcc.

This patch replace use of CFLAGS with KBUILD_CFLAGS all over the
tree and enabling one to use:
make CFLAGS=...
to specify additional gcc commandline options.

One usecase is when trying to find gcc bugs but other
use cases has been requested too.

Patch was tested on following architectures:
alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k

Test was simple to do a defconfig build, apply the patch and check
that nothing got rebuild.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-14 22:21:35 +02:00
Sam Ravnborg 836caba77c kbuild: kill backward compatibility checks
These checks has been present for several kernel releases (> 5).
So lets just get rid of them.
With this we no longer check for use of:
EXTRA_TARGETS, O_TARGET, L_TARGET, list-multi, export-objs

There were three remaining in-tree users of O_TARGET in some
unmaintained sh64 code - mail sent to the maintainer + list.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:20:32 +02:00
Sam Ravnborg f5fb976520 kbuild: fix directory traversal bug
Previously kbuild choked over the following:
obj-y += ../../../arch/i386/kernel/bootflag.o

This has resulted in some rather ugly workarounds in
current x86_64 tree.
This patch fixes kbuild to allow the above and enable
potential cleanups in x86_64 and maybe in other places.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:15:31 +02:00
Sam Ravnborg 5e8d780d74 kbuild: fix ia64 breakage after introducing make -rR
kbuild used $¤(*F to get filename of target without extension.
This was used in several places all over kbuild, but introducing
make -rR broke his for all cases where we specified full path to
target/prerequsite. It is assumed that make -rR disables old style
suffix-rules which is why is suddenly failed.

ia64 was impacted by this change because several div* routines in
arch/ia64/lib are build using explicit paths and then kbuild failed.

Thanks to David Mosberger-Tang <David.Mosberger@acm.org> for an explanation
what was the root-cause and for testing on ia64.

This patch also fixes two uses of $(*F) in arch/um

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-07-01 09:58:02 +02:00
Linus Torvalds d38b69689c Revert "kbuild: fix make -rR breakage"
This reverts commit e5c44fd88c.

Thanks to Daniel Ritz and Michal Piotrowski for noticing the problem.

Daniel says:

  "[The] reason is a recent change that made modules always shows as
   module.mod.  it breaks modprobe and probably many scripts..besides
   lsmod looking horrible

   stuff like this in modprobe.conf:
        install pcmcia_core /sbin/modprobe --ignore-install pcmcia_core; /sbin/modprobe pcmcia
   makes modprobe fork/exec endlessly calling itself...until oom
   interrupts it"

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 16:59:26 -07:00
Sam Ravnborg e5c44fd88c kbuild: fix make -rR breakage
make failed to supply the filename when using make -rR and using $(*F)
to get target filename without extension.
This bug was not reproduceable in small scale but using:
$(basename $(notdir $@)) fixes it with same functionality.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-24 23:13:59 +02:00
Sam Ravnborg d9df92e22a kbuild: properly pass options to hostcc when doing make O=..
This fix a longstanding bug where proper options was not
passed to hostcc in case of a make O=.. build.
This bug showed up in (not yet merged) klibc, and is not known
to have any counterpart in-kernel.
Fixed by moving the flags macro to Kbuild.include so it can be used
by both Makefile.lib and Makefile.host.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-04-07 08:36:49 +02:00
Ustyugov Roman f83b5e323f kbuild: set correct KBUILD_MODNAME when using well known kernel symbols as module names
This patch fixes a problem when we use well known kernel symbols as module
names.

For example, if module source name is current.c, idle_stack.c or etc.,
we have a bad KBUILD_MODNAME value.
For example, KBUILD_MODNAME will be "get_current()" instead of "current", or
"(init_thread_union.stack)" instead of "idle_task".

The trick is to define a stringify macro on the commandline - named
KBUILD_STR for namespace reasons - and then to stringify the module
name.

There are a few uses of KBUILD_MODNAME throughout the tree but the usage
is for debug and will not be harmed by this change so left untouched for now.

While at it KBUILD_BASENAME was changed too. Any spinlock usage in the
unix module would have created wrong section names without it.
Usage in spinlock.h fixed so it no longer stringify KBUILD_BASENAME.

Original patch from Ustyogov Roman - all bugs introduced by me.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-12-26 00:33:41 +01:00
Sam Ravnborg 8ec4b4ff1c kbuild: introduce Kbuild.include
Kbuild.include is a placeholder for definitions originally present in
both the top-level Makefile and scripts/Makefile.build.
There were a slight difference in the filechk definition, so the most videly
used version was kept and usr/Makefile was adopted for this syntax.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
2005-07-25 20:10:36 +00:00
Sam Ravnborg 7c6b155fb4 kbuild: drop descend - converting existing users
There was only two users left of descend. Fix them so they
use $(clean)= and $(build)=.
Drop definition of descend.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
2005-07-25 12:51:08 +00:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00