Commit Graph

655 Commits

Author SHA1 Message Date
Randy Dunlap 77cc23b8c7 kernel-doc: warn on badly formatted short description
Make kernel-doc warn when a function/struct/union/typedef does not contain
a properly formatted short description, such as:
 * scsi_devinfo: set up the dynamic device list
or
 * scsi_devinfo -

This warning is only generated when verbose (-v) mode is used.

Also explain the -v command line option in the -h output.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:17 -08:00
Randy Dunlap 792aa2f2cc kernel-doc: prevent duplicate description: output
Prevent duplicate output of a Description: section when there is a "blank"
("*") line between the initial function name/description line and the
"Description:" header.

Test case:  drivers/scsi/scsi_devinfo.c::scsi_init_devinfo().

Rob Landley hit this while he was producing SCSI kernel-doc.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:17 -08:00
Randy Dunlap 94b3e03c87 kernel-doc: fix for vunmap function prototype
Fix kernel-doc function prototype parsing which was exposed by vunmap() by
allowing more than one '*' before the function name.

Error(linux-2.6.24-mm1//mm/vmalloc.c:438): cannot understand prototype: 'struct page **vunmap(const void *addr) '

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:16 -08:00
Joern Engel 2b54aaef7a Claim maintainership for block2mtd and update email addresses
I have been prime author and maintainer of block2mtd from day one, but
neither MAINTAINERS nor the module source makes this fact clear.  And while
I'm at it, update my email addresses tree-wide, as the old address
currently bounces and change my name to "joern" as unicode will likely
continue to cause trouble until the end of this century.

Signed-off-by: Joern Engel <joern@lazybastard.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:09 -08:00
Paulo Marques f2df3f65d0 kallsyms should prefer non weak symbols
When resolving symbol names from addresses with aliased symbol names,
kallsyms_lookup always returns the first symbol, even if it is a weak
symbol.

This patch changes this by sorting the symbols with the weak symbols last
before feeding them to the kernel.  This way the kernel runtime isn't
changed at all, only the kallsyms build system is changed.

Another side effect is that the symbols get sorted by address, too.  So,
even if future binutils version have some bug in "nm" that makes it fail to
correctly sort symbols by address, the kernel won't be affected by this.

Mathieu says:

  I created a module in LTTng that uses kallsyms to get the symbol
  corresponding to a specific system call address.  Unfortunately, all the
  unimplemented syscalls were all referring to the (same) weak symbol
  identifying an unrelated system call rather that sys_ni (or whatever
  non-weak symbol would be expected).  Kallsyms was dumbly returning the first
  symbol that matched.

  This patch makes sure kallsyms returns the non-weak symbol when there is
  one, which seems to be the expected result.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Looks-great-to: Rusty Russell <rusty@rustcorp.com.au>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:07 -08:00
Robin Getz a3b81113fb remove support for un-needed _extratext section
When passing a zero address to kallsyms_lookup(), the kernel thought it was
a valid kernel address, even if it is not.  This is because is_ksym_addr()
called is_kernel_extratext() and checked against labels that don't exist on
many archs (which default as zero).  Since PPC was the only kernel which
defines _extra_text, (in 2005), and no longer needs it, this patch removes
_extra_text support.

For some history (provided by Jon):
 http://ozlabs.org/pipermail/linuxppc-dev/2005-September/019734.html
 http://ozlabs.org/pipermail/linuxppc-dev/2005-September/019736.html
 http://ozlabs.org/pipermail/linuxppc-dev/2005-September/019751.html

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jon Loeliger <jdl@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:01 -08:00
Bryan Wu ba3d05fb63 kbuild: add svn revision information to setlocalversion
follow git and mercurial style, include uncommitted changes detect

Cc: Frans Pop <elendil@planet.nl>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-03 08:59:50 +01:00
Sam Ravnborg fa95eb1f17 kbuild: do not warn about __*init/__*exit symbols being exported
We have several legitimate uses where we export symbols
annotated with one of:
__devinit, __cpuinit, __meminit and their exit counterpart.
So let's stop warning about those being exported in favour
of adding all sorts of workaround to silence the warning.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-03 08:58:08 +01:00
Sam Ravnborg 603d49885e kconfig: ignore select of unknown symbol
We have had warnings for a long time about select of unknow symbol
but the warnings does not really makes sense since we may
select a symbol that is relevant and defined in one
arch but not in another arch.
And as long as we do not use a common set of Kconfig files
for all archs lets just ignore this case.

Previously we have used this to find bad uses of
select but we need a more relaible method to do so.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-02-03 08:58:07 +01:00
Sam Ravnborg 36ef805bd5 kconfig: mark config as changed when loading an alternate config
Michal Zachar <mgzachar@mail.t-com.sk> reported that
menuconfig did not save the new config when loading
an alternate config unless he altered it manually.

Mark config as changed upon load of alternate config fixed this.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Roman Zippel <zippel@linux-m68k.org>
2008-02-03 08:58:07 +01:00
Sam Ravnborg e5f95c8b77 kbuild: print only total number of section mismatces found
We have too many section mismatches detected at the moment.
So silence modpost and prevent the option from being
set in a typical allyesconfig build.

Tell the user how to see all the deteils in the summary
message from modpost.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-03 08:58:07 +01:00
Greg Kroah-Hartman de6f92b9ee USB: handle idVendor of 0x0000
Some crazy devices in the wild have a vendor id of 0x0000.  If we try to
add a module alias with this id, we just can't do it due to a check in
the file2alias.c file.  Change the test to verify that both the vendor
and product ids are 0x0000 to show a real "blank" module alias.

Note, the module-init-tools package also needs to be changed to properly
generate the depmod tables.

Cc: Janusz <janumix@poczta.fm>
Cc: stable <stable@kernel.org>
Cc: Jon Masters <jcm@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:34:46 -08:00
Sam Ravnborg e241a63037 kbuild: warn about ld added unique sections
If there is a mixture of specifying sections for code in gcc
and assembler then if the assembler code do not add
the "ax" flags the linker will see this as two different sections
and generate unique sections for each. ld does so by adding a dot
and a number.
Teach modpost to warn if a section shows up that match this
pattern - but do this only for non-debug sections.

It will result in warnings like this:

WARNING: vmlinux.o (.sched.text.1): unexpected section name.
The (.[number]+) following section name are ld generated and not expected.
Did you forget to use "ax"/"aw" in a .S file?
Note that for example <linux/init.h> contains
section definitions for use in .S files.

All warnings seen with a defconfig build for:
x86 (32+64bit) and sparc64 has been fixed (via respective maintainers).

arm, powerpc (64 bit), s390 (32 bit), ia64, alpha, sh4 checked - no
warnings seen with a defconfig build.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:21:19 +01:00
Sam Ravnborg 588ccd732b kbuild: add verbose option to Section mismatch reporting in modpost
If the config option CONFIG_SECTION_MISMATCH is not set and
we see a Section mismatch present the following to the user:

modpost: Found 1 section mismatch(es).
To see additional details select "Enable full Section mismatch analysis"
in the Kernel Hacking menu (CONFIG_SECTION_MISMATCH).

If the option CONFIG_SECTION_MISMATCH is selected
then be verbose in the Section mismatch reporting from mdopost.
Sample outputs:

WARNING: o-x86_64/vmlinux.o(.text+0x7396): Section mismatch in reference from the function discover_ebda() to the variable .init.data:ebda_addr
The function  discover_ebda() references
the variable __initdata ebda_addr.
This is often because discover_ebda lacks a __initdata
annotation or the annotation of ebda_addr is wrong.

WARNING: o-x86_64/vmlinux.o(.data+0x74d58): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_plx9050_exit()
The variable pci_serial_quirks references
the function __devexit pci_plx9050_exit()
If the reference is valid then annotate the
variable with __exit* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

WARNING: o-x86_64/vmlinux.o(__ksymtab+0x630): Section mismatch in reference from the variable __ksymtab_arch_register_cpu to the function .cpuinit.text:arch_register_cpu()
The symbol arch_register_cpu is exported and annotated __cpuinit
Fix this by removing the __cpuinit annotation of arch_register_cpu or drop the export.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:21:18 +01:00
Jan Beulich f5eaa323eb kconfig: tristate choices with mixed tristate and boolean values
Change kconfig behavior so that mixing bool and tristate config
settings in a choice is possible and has the desired effect of offering
just the tristate options individually if the choice gets set to M, and
a normal boolean selection if the choice gets set to Y.

Also fix scripts/kconfig/conf's handling of children of choice values -
there may be more than one immediate child, and all of them need to be
processed.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: "Roman Zippel" <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:21:18 +01:00
Adrian Bunk 3ff6eecca4 remove __attribute_used__
Remove the deprecated __attribute_used__.

[Introduce __section in a few places to silence checkpatch /sam]

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:21:18 +01:00
Daniel De Graaf bc395add94 kbuild: support ARCH=x86 in buildtar
Signed-off-by: Daniel De Graaf <danieldegraaf@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:21:18 +01:00
Adrian Bunk 9649ef878d kconfig: remove "enable"
Kconfig had a synonym "enable" for "select" that was neither documented
nor used.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:21:18 +01:00
Sam Ravnborg 58fb0d4f2f kbuild: simplified warning report in modpost
Refactor code so the warning report function
does nothing else than reporting warnings.
As a side effect some other code paths were cleaned
up by this.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:21:18 +01:00
Sam Ravnborg ff13f92690 kbuild: introduce a few helpers in modpost
Introducing helpers to retreive symbol and section
names cleaned up the code a bit.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:21:18 +01:00
Sam Ravnborg 157c23c80e kbuild: use simpler section mismatch warnings in modpost
The typical layout is now:
WARNING: vmlinux.o(.text+0x372ec): Section mismatch: reference to .devinit.text:pci_scan_one_pbm in 'psycho_scan_bus'

This is first step towards more readable warnings.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:21:18 +01:00
Sam Ravnborg 91341d4b2c kbuild: introduce new option to enhance section mismatch analysis
Setting the option DEBUG_SECTION_MISMATCH will
report additional section mismatch'es but this
should in the end makes it possible to get rid of
all of them.

See help text in lib/Kconfig.debug for details.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:21:18 +01:00
Sam Ravnborg eb8f689046 Use separate sections for __dev/__cpu/__mem code/data
Introducing separate sections for __dev* (HOTPLUG),
__cpu* (HOTPLUG_CPU) and __mem* (MEMORY_HOTPLUG)
allows us to do a much more reliable Section mismatch
check in modpost. We are no longer dependent on the actual
configuration of for example HOTPLUG.

This has the effect that all users see much more
Section mismatch warnings than before because they
were almost all hidden when HOTPLUG was enabled.
The advantage of this is that when building a piece
of code then it is much more likely that the Section
mismatch errors are spotted and the warnings will be
felt less random of nature.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Greg KH <greg@kroah.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Adrian Bunk <bunk@kernel.org>
2008-01-28 23:21:17 +01:00
Sam Ravnborg 6c5bd235bf kbuild: check section names consistently in modpost
Now that match() is introduced use it consistently so
we can share the section name definitions.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:40 +01:00
Sam Ravnborg 10668220a9 kbuild: introduce blacklisting in modpost
Change the logic in modpost so we identify all the
bad combinations of sections that refer to other
sections.
Compared to the previous approach we are much less
dependent on knowledge of what additional sections
the tool chain uses and thus we can keep the false
positives low.

The implmentation is changed to use a table based
lookup and we now check all combinations in first
pass so we no longer need separate passes for init
and exit sections.

Tested that the same warnings are generated for
an allyesconfig build without CONFIG_HOTPLUG.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Adrian Bunk <bunk@kernel.org>
2008-01-28 23:14:40 +01:00
Sam Ravnborg 5b24c0715f kbuild: code refactoring in modpost
Split a too long function up in smaller bits to make
prgram logic easier to follow.
A few related changes done due to parameter
changes.

No functional changes.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:40 +01:00
Sam Ravnborg 9ad21c3f3e kbuild: try harder to find symbol names in modpost
The relocation record sometimes contained an address
which was not an exactly match for a symbol.

Implment some simple logic such that if there
is a symbol within 20 bytes of the address contained
in the relocation record then print the name of this
symbol.

With this change modpost could find symbol names
for the remaining .init.text symbols in my
allyesconfig build for x86_64.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:40 +01:00
Sam Ravnborg d1f25e6658 kbuild: fix so modpost can now check any .o file
It is very convinient to say:
scripts/mod/modpost mm/built-in.o

to check if any section mismatch errors occured
in mm/ (as an example).
Fix it so this is possible again.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:40 +01:00
Randy Dunlap fa220d89ad kbuild: minor scripts/decodecode update
Remove the tmp file when exiting.  Noticed by Arjan van de Ven.
Catch mktemp failure and exit with message.
Trap kill or other signals and exit cleanly.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:40 +01:00
Roman Zippel 80daa56008 kconfig: use environment option
Use the environment option to provide the ARCH symbol
and the KERNELVERSION symbol.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:39 +01:00
Roman Zippel 93449082e9 kconfig: environment symbol support
Add the possibility to import a value from the environment into kconfig
via the option syntax. Beside flexibility this has the advantage
providing proper dependencies.
Documented the options syntax.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:39 +01:00
Roman Zippel 7a96292335 kconfig: explicitly introduce expression list
Rename E_CHOICE to E_LIST to explicitly add support for expression
lists. Add a helper macro expr_list_for_each_sym to more easily iterate
over the list.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:39 +01:00
EGRY Gabor 0ffce8d944 kconfig: gconfig: symbol fix
Gettext support for symbol names are unnecessary.

Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:39 +01:00
EGRY Gabor 534a450c38 kconfig: gettext support for config
Gettext support for conf.c

[Include locale.h by Kyle].

Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
2008-01-28 23:14:39 +01:00
EGRY Gabor 75c0a8a55c kconfig: gettext support for lxdialog
Gettext support for lxdialog.

Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:39 +01:00
EGRY Gabor 413f006bab kconfig: gettext support for menuconfig
Full gettext support for menuconfig.

Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:39 +01:00
EGRY Gabor c21a2d9589 kconfig: gettext support for xconfig
Full gettext support for xconfig.

Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:39 +01:00
EGRY Gabor 01771b0fef kconfig: macro fix in menu.c
This patch removes the indirect I18N support for config file.

Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:39 +01:00
EGRY Gabor 46d2631978 kconfig: gettext support for gconfig
Gettext support for menu and toolbar.

Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:39 +01:00
EGRY Gabor bb7ef3905a kconfig: missing macros in gconfig
This patch adds missing gettext macros.

Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:38 +01:00
EGRY Gabor f7a4b4cdc2 kconfig: whitespace removing
This patch removes the unnecessary whitespaces from
end of help lines of Kconfig files.

Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:38 +01:00
EGRY Gabor 1020026f99 kconfig: update-po-config info
This patch adds tracking messages.

Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:38 +01:00
Jan Beulich 1d3b3bfab1 kbuild: scripts/mkmakefile: dynamic determination of output directory
Rather than fixing the output directory in the generated Makefile,
determine it from the placement of Makefile. This allows moving
the build tree around or accessing it through different mount paths.

(The lastword definition is a compatibility one for make prior to 3.81;
newer make will simply ignore it and use the [faster] built-in.)

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:38 +01:00
Sam Ravnborg df578e7d83 kbuild: clean up modpost.c
akpm complained about overly long lines in modpost.c and
when started additional style issues were fixed:

o Updated my copyright
o Removed unneeded {}
o Drop assignments in if ()
o Spaces around operators
o Break long lines
o locate * near variable not type
o Fix a format specifier for sizeof()
o Corrected placement of '{' and '}'
o spaces to tabs (but use tabs only for indention)

modpost.c is not checkpatch clean. Readability were favoured
on top of checkpatch compliance.
But checkpatch were used to find additional stuff to clean up.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:38 +01:00
Ladislav Michl 07f7668858 kconfig: use C89 random functions in conf.c
rand and srand functions conform also to C89 in addition to POSIX.1-2001,
which makes them a bit more portable (work also on MinGW host). Linux man
page also says:
"The versions of rand() and srand() in the Linux C Library use the same
random number generator as random() and srandom()".

* Use C89 conformant functions rand() and srand()

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:38 +01:00
Ladislav Michl 75ff4309cd kconfig: fix whitespace and sort includes in conf.c
Sort includes and remove leading whitespace.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org
2008-01-28 23:14:38 +01:00
Sam Ravnborg de83cf148a kconfig: delete unused FILE_ and SYMBOL_ flags
The *_PRINTED flags were never used - so delete them.
Do we need them later then we can re-add them.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:38 +01:00
Sam Ravnborg d6ee35764f kconfig: rename E_OR & friends to avoid name clash
We had macros named the same as a set of enumeration values.
It is legal code but very confusing to read - so rename
the macros from E_* to EXPR_*

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:38 +01:00
Jan Engelhardt d84876f9f8 kconfig: allow overriding symbols
Allow config variables in .config to override earlier ones in the same
file. In other words,

	# CONFIG_SECURITY is not defined
	CONFIG_SECURITY=y

will activate it. This makes it a bit easier to do

cat original-config myconfig myconfig2 ... >.config;
and run *config as expected.

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
2008-01-28 23:14:37 +01:00
Ladislav Michl 09af091f50 kconfig: make kconfig MinGW friendly
Kconfig is powerfull tool. So powerfull that more and more software
projects are using it for configuration. So instead of fixing some of
them one by one, lets fix it in kernel and wait for sync.

This work was originaly done for PTXdist - GPL licensed build system for
userlands and cross-compilers, but it will not hurt kernel kconfig
either. PTXdist menuconfig now works on Windows linked with PDCurses and
compiled using MinGW - there is no termios and signals.

* Do not include <sys/wait.h> and <signal.h> (comes from times when
  lxdialog was separate process)
* Do not mess with termios directly and let curses tell screen size.
  Comment to commit c8dc68ad0f says
  check for screen size could be removed later, but because it didn't
  happen for more than year I left it here as well.
* Save cursor position added by Sam

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:37 +01:00
Theodore Ts'o b052ce4c84 kbuild: fix false positive -dirty tag caused by make-kpkg
make-kpkg modifies scripts/package/Makefile and deletes
scripts/package/builddeb as part of its build process.  Ignore these
changes so the tree isn't marked as -dirty, when it is just an
artifact of make-kpkg.  (make-kpkg clean restores the files to their
original state, and these helper scripts won't affect the final
compiled kernel in any way.)

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:37 +01:00
Theodore Ts'o 4e7434ff02 kbuild: fix scripts/setlocalversion to avoid erroneous -dirty tag
If git's index file is out of date, and some files have been touched
such that their timestamp doesn't what is in the index, "git
diff-index HEAD" may show that a particular file is dirty, when in
fact it really isn't.  Running "git update-index" will update the
index to avoid these false positives.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:37 +01:00
Theodore Ts'o d882421f4e kbuild: change CONFIG_LOCALVERSION_AUTO to use a git-describe-ish format
Change the automatic local version to have the form -nnnnn-gSHA1SUMID,
where 'nnnnn' is the number of commits since the last tag (i.e.,
2.6.21-rc7).  This makes it much more likely that the package names created
for the kernel will look "newer" to a package manager.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:37 +01:00
Andreas Mohr 22d6a6a018 kbuild: eradicate bashisms in scripts/patch-kernel
Make the patch-kernel shell script sufficiently compatible with POSIX
shells, i.e., remove bashisms from scripts/patch-kernel.
This means that it now also works on dash 0.5.3-5
and still works on bash 3.1dfsg-8.

Full changelog:
- replaced non-standard "==" by standard "="
- replaced non-standard "source" statement by POSIX "dot" command
- use leading ./ on mktemp filename to force the tempfile to a local
  directory, so that the search path is not used
- replace bash syntax to remove leading dot by similar POSIX syntax
- added missing (optional/not required) $ signs to shell variable names

Signed-off-by: Andreas Mohr <andi@lisas.de>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:37 +01:00
Sam Ravnborg 9b213118fa kbuild: fix installing external modules
Eric Sandeen <sandeen@redhat.com> reported:
  Installing external modules is supposed to put them in some path
  under /lib/modules/<version>/extra/subdir/, but this change:
  http://linux.bkbits.net:8080/linux-2.6/?PAGE=cset&REV=1.1982.9.23
  makes them go under /lib/modules/<version>/extrasubdir

 (for example, make M=fs/ext3 modules_install puts ext3.ko in
 /lib/modules/<version>/extrafs/ext3.ko)

This was the case only when specifying a trailing slash to M=..

Fixed by removing trailing slash if present so
we correctly match dir part of target.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Eric Sandeen <sandeen@redhat.com>
2008-01-28 23:14:36 +01:00
Mike Frysinger 36091fd348 kbuild: fixup genksyms usage/getopt
The usage does not mention the "-a,--arch" or "-T,--dump-types" options, so
add them.  The calls to getopt() seem to mention options that no longer exist
(some "k" and "p" thingy) but omits the "h" option which means using '-h'
actually triggers the error code path, so update those as well.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:36 +01:00
Sam Ravnborg 0484f1299f kbuild: fix buglet in gcc-version.sh
Greg Schafer <gschafer@zip.com.au> reported:
====
$make mrproper
scripts/gcc-version.sh: [[: command not found

This is on a very old host with an ancient bash as /bin/sh. But I have
CONFIG_SHELL set and pointing to a modern bash. Something is wrong.

This doesn't happen with 2.6.23
====

Fixed using a more common string equality test.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Greg Schafer <gschafer@zip.com.au>
Cc: Jesper Juhl <jesper.juhl@gmail.com>
2008-01-28 23:14:36 +01:00
Robert P. J. Day 899c38420c Kbuild: Clarify the rpm-related make packaging targets
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:36 +01:00
Aron Griffis 3dce174cfc kbuild: support mercurial in setlocalversion
This represents mercurial changesets similarly to git.  For untagged
revisions, append the changeset id.  If there are uncommitted changes,
append -dirty.  For example, -hgc60016ba6237-dirty

Signed-off-by: Aron Griffis <aron@hp.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:36 +01:00
Andres Salomon 2f4b489b77 kconfig: use getopt() in conf.c for handling command line arguments
Switch from doing our own parsing of command line arguments to
using getopt(3) to do it.  Aside from simplifying things, this allows us to
specify multiple arguments; the old code could only accept two arguments
(input_mode and kconfig name).

Note some subtle changes:
 - The argument '-?' is no longer supported.
 - '-h' is not treated as an error, so output goes to stdout, and we
   exit with '0'.
 - There is no compatibility checking amongst arguments; the last option
   will simply override earlier options.  For example, 'conf -n -y foo'
   is perfectly valid now (input_mode will be set_yes).  Previously, that
   would have been an error ("can't find file -y").

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:36 +01:00
Andi Kleen 666ab414fe kbuild: fix a buffer overflow in modpost
When passing an file name > 1k the stack could be overflowed.
Not really a security issue, but still better plugged.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:36 +01:00
Andi Kleen 58b7a68de3 kbuild: fix format string warnings in modpost
Fix wrong format strings in modpost exposed by the previous patch.
Including one missing argument -- some random data was printed instead.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:36 +01:00
Andi Kleen 6d9a89ea4b kbuild: declare the modpost error functions as printf like
This way gcc can warn for wrong format strings
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:36 +01:00
Sam Ravnborg 6e588f6dcf kconfig: if ncurses-devel is missing then say so
With this patch when ncurses-devel (or whatever it is named)
is missing trying to run menuconfig will result in this:

$ make menuconfig
  HOSTCC  scripts/kconfig/conf.o
  HOSTCC  scripts/kconfig/kxgettext.o
 *** Unable to find the ncurses libraries or the
 *** required header files.
 *** 'make menuconfig' requires the ncurses libraries.
 ***
 *** Install ncurses (ncurses-devel) and try again.
 ***
make[1]: *** [scripts/kconfig/dochecklxdialog] Error 1
make: *** [menuconfig] Error 2

Much better than before where we just listed some build errors.
The other *config targets will work indepenednt on ncurses
being present or not.

Includes improvements suggested by: Frans Pop <elendil@planet.nl>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Frans Pop <elendil@planet.nl>
2008-01-28 23:14:36 +01:00
Tejun Heo 551559e13a kbuild: implement modules.order
When multiple built-in modules (especially drivers) provide the same
capability, they're prioritized by link order specified by the order
listed in Makefile.  This implicit ordering is lost for loadable
modules.

When driver modules are loaded by udev, what comes first in
modules.alias file is selected.  However, the order in this file is
indeterministic (depends on filesystem listing order of installed
modules).  This causes confusion.

The solution is two-parted.  This patch updates kbuild such that it
generates and installs modules.order which contains the name of
modules ordered according to Makefile.  The second part is update to
depmod such that it generates output files according to this file.

Note that both obj-y and obj-m subdirs can contain modules and
ordering information between those two are lost from beginning.
Currently obj-y subdirs are put before obj-m subdirs.

Sam Ravnborg cleaned up Makefile modifications and suggested using awk
to remove duplicate lines from modules.order instead of using separate
C program.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Bill Nottingham <notting@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Jon Masters <jonathan@jonmasters.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:35 +01:00
Johannes Berg e662af4281 kernel-doc: new P directive for DOC: sections
The !P directive includes the contents of a DOC: section
given by title, e.g.
!Pfilename Title of the section

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:35 +01:00
Johannes Berg 2e95972c44 kernel-doc: use no-doc option
When asked by a template to include all functions from a file,
it will also include DOC: sections wreaking havoc in the generated
docbook file. This patch makes it use the new -no-doc-sections
flag for kernel-doc to avoid this.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:35 +01:00
Johannes Berg 4b44595a7b kernel-doc: process functions, not DOC:
This flag is necessary for the next patch for docproc to output
only the functions and not DOC: sections when a function list
is requested.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:35 +01:00
Johannes Berg b112e0f73f kernel-doc: single DOC: selection
Currently, DOC: sections are always output even if only a single
function is requested, fix this and also make it possible to just
output a single DOC: section by giving its title as the function
name to output.

Also fixes docbook XML well-formedness for sections with examples.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:35 +01:00
Johannes Berg 1b9bc22d71 kernel-doc: init kernel version
The kernel-doc script triggers a perl warning when invoked
without KERNELVERSION in the environment, rather make it use
the string "unknown kernel version" instead.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:35 +01:00
Johannes Berg 5c98fc0360 kernel-doc: fix xml output mode
After Randy's patch fixing the HTML output in DOC: sections
(6b5b55f6c4) the same bug remained in XML
mode, this fixes it.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:35 +01:00
Paul Mundt 870e6f7e15 kconfig: obey KCONFIG_ALLCONFIG choices with randconfig.
Currently when using KCONFIG_ALLCONFIG with randconfig the choice options
are clobbered.  As recommended by Roman, this adds an is_new test to see
whether to select a new option or obey the existing one.

This is a resend of the earlier patch a couple of weeks ago, since there
was no reply.  Original thread is at http://lkml.org/lkml/2007/11/28/94

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-23 12:54:37 -08:00
Nathan Lynch 8998979cc1 fix bloat-o-meter for ppc64
bloat-o-meter assumes that a '.' anywhere in a symbol's name means that it
is static and prepends 'static.' to the first part of the symbol name,
discarding the portion of the name that follows the '.'.  However, the
names of function entry points begin with '.' in the ppc64 ABI.  This
causes all function text size changes to be accounted to a single 'static.'
entry in the output when comparing ppc64 kernels.

Change getsizes() to ignore the first character of the symbol name when
searching for '.'.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17 19:28:17 -08:00
Guillaume Chazarain 971edcfc8b kbuild: re-enable Makefile generation in a new O=... directory
The commit:
18c32dac75 "kbuild: fix
building with O=.. options"
disabled the creation of a Makefile in a new O=... directory. Restore it.

Signed-off-by: Guillaume Chazarain <guichaz@yahoo.fr>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-12-13 19:19:20 +01:00
Sam Ravnborg 18c32dac75 kbuild: fix building with O=.. options
The check introduced in commit:
4f1127e204 "kbuild: fix
infinite make recursion"

caused certain external modules not to build and
also caused 'make targz-pkg' to fail.
This is a minimal fix so we revert to previous
behaviour - but we do not overwrite the Makefile
in the top-level directory.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Jay Cliburn <jacliburn@bellsouth.net>
Cc: Jay Cliburn <jacliburn@bellsouth.net>
2007-12-09 08:55:13 +01:00
Andy Whitcroft 8905a67c63 update checkpatch.pl to version 0.12
This version brings a new terse output mode as well as many improvements to
the unary detection and bare type regcognition.  It also brings the usual
updates for false positives, though these seem to be slowing markedly
now that the unary detector is no longer just putting its finger in the
air and guessing.  Of note:

  - new --terse mode producing a single line per report
  - loosening of the block brace checks
  - new checks for enum/union/struch brace placements
  - hugely expanded "bare type" detection
  - checks for inline usage
  - better handling of already open comment blocks
  - handle patches which introduce or remove lines without newlines

Andy Whitcroft (19):
      Version: 0.12
      style fixes as spotted by checkpatch
      add a --terse options of a single line of output per report
      block brace checks should only apply for single line blocks
      all new bare type detector
      check spacing for open braces with enum, union and struct
      check for LINUX_VERSION_CODE
      macros definition bracketing checks need to ignore -ve context
      clean up the mail-back mode, -q et al
      expand possible type matching to declarations
      allow const and sparse annotations on possible types
      handle possible types as regular types everywhere
      prefer plain inline over __inline__ and __inline
      all new open comment detection
      fix up conditional extraction for if assignment checks
      add const to the possible type matcher
      unary checks: a for loop is a conditional too
      possible types: detect function pointer definitions
      handle missind newlines at end of file, report addition

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29 09:24:51 -08:00
Sam Ravnborg 6840999b19 x86: simplify "make ARCH=x86" and fix kconfig all.config
Simplify "make ARCH=x86" and fix kconfig so we again can set 64BIT in
all.config.

For a fix the diffstat is nice:
 6 files changed, 3 insertions(+), 36 deletions(-)

The patch reverts these commits:
 - 0f855aa64b ("kconfig: add helper to set
   config symbol from environment variable")
 - 2a113281f5 ("kconfig: use $K64BIT to
   set 64BIT with all*config targets")

Roman Zippel pointed out that kconfig supported string compares so
the additional complexity introduced by the above two patches were
not needed.

With this patch we have following behaviour:

  # make {allno,allyes,allmod,rand}config [ARCH=...]
  option \ host arch      | 32bit         | 64bit
  =====================================================
  ./.                     | 32bit         | 64bit
  ARCH=x86                | 32bit         | 32bit
  ARCH=i386               | 32bit         | 32bit
  ARCH=x86_64             | 64bit         | 64bit

The general rule are that ARCH= and native architecture takes
precedence over the configuration.

So make ARCH=i386 [whatever] will always build a 32-bit kernel
no matter what the configuration says.  The configuration will
be updated to 32-bit if it was configured to 64-bit and the
other way around.

This behaviour is consistent with previous behaviour so no
suprises here.

make ARCH=x86 will per default result in a 32-bit kernel but as
the only ARCH= value x86 allow the user to select between 32-bit
and 64-bit using menuconfig.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Herrmann <aherrman@arcor.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-17 08:35:43 -08:00
Sam Ravnborg daa93fab82 x86: enable "make ARCH=x86"
After unification of the Kconfig files and
introducing K64BIT support in kconfig
it required only trivial changes to enable
"make ARCH=x86".

With this patch you can build for x86_64 in several ways:
1) make ARCH=x86_64
2) make ARCH=x86 K64BIT=y
3) make ARCH=x86 menuconfig
   => select 64-bit

Likewise for i386 with the addition that
i386 is default is you say ARCH=x86.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-12 21:02:20 +01:00
Sam Ravnborg 2a113281f5 kconfig: use $K64BIT to set 64BIT with all*config targets
The variable K64BIT can now be used to select the
value of CONFIG_64BIT.

This is for example useful for powerpc to generate
allmodconfig for both bit sizes - like this:
make ARCH=powerpc K64BIT=y
make ARCH=powerpc K64BIT=n

To use this the Kconfig file must use "64BIT" as the
config value to select between 32 and 64 bit.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2007-11-12 21:02:20 +01:00
Sam Ravnborg 0f855aa64b kconfig: add helper to set config symbol from environment variable
Add conf_set_env_sym() that can set an already defined symbol
based on the value of an environment variable.

Unknown symbols are silently ignored.
A warning is printed if the value of the environment variable
is unexpected.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2007-11-12 21:02:20 +01:00
Sam Ravnborg 9c900a9c9d kconfig: factor out code in confdata.c
This patch introduce no functional changes.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2007-11-12 21:02:19 +01:00
Sam Ravnborg 47572387d5 x86: move i386 and x86_64 Kconfig files to x86 directory
After a small change in kconfig Makefile we could
move all x86 Kconfig files to x86 directory.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-25 22:37:02 +02:00
Sam Ravnborg e703f75d62 kconfig: small code refactoring in kconfig Makefile
Do not hardcode the arch/$(ARCH)/Kconfig name all over

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-25 22:35:18 +02:00
Sam Ravnborg 2266cfd50d x86: move defconfig files for i386 and x86_64 to x86
With some small changes to kconfig makefile we can now
locate the defconfig files for i386 and x86_64 in
the configs/ subdirectory under x86.
make ARCH=i386 defconfig and make defconfig
works as expected also after this change.
But arch maintainers shall now update a defconfig file in
the configs/ directory.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-25 22:27:41 +02:00
Rusty Russell b01d9f2863 Module autoprobing support for virtio drivers.
This adds the logic to convert the virtio ids into module aliases, and
includes a modalias entry in sysfs and the env var to make probing work.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:55 +10:00
Linus Torvalds cfa76f024f Merge branch 'master' of hera.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6
* 'master' of hera.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6: (29 commits)
  [PARISC] fix uninitialized variable warning in asm/rtc.h
  [PARISC] Port checkstack.pl to parisc
  [PARISC] Make palo target work when $obj != $src
  [PARISC] Zap unused variable warnings in pci.c
  [PARISC] Fix tests in palo target
  [PARISC] Fix palo target
  [PARISC] Restore palo target
  [PARISC] Attempt to clean up parisc/Makefile
  [PARISC] Fix infinite loop in /proc/iomem
  [PARISC] Quiet sysfs_create_link __must_check warnings in pdc_stable
  [PARISC] Squelch pci_enable_device __must_check warning in superio
  [PARISC] Kill off broken irqstack code
  [PARISC] Remove hardcoded uses of PAGE_SIZE
  [PARISC] Clean up pointless ASM_PAGE_SIZE_DIV use
  [PARISC] Kill off the last vestiges of ASM_PAGE_SIZE
  [PARISC] Kill off ASM_PAGE_SIZE use
  [PARISC] Beautify parisc vmlinux.lds.S
  [PARISC] Clean up a resource_size_t warning in sba_iommu
  [PARISC] Kill incorrect cast warning in unwinder
  [PARISC] Kill zone_to_nid printk warning
  ...

Fixed trivial conflict in include/asm-parisc/tlbflush.h manually
2007-10-20 20:19:15 -07:00
Kyle McMartin 562d139cc5 [PARISC] Port checkstack.pl to parisc
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2007-10-20 13:18:56 -07:00
Randy Dunlap a54bb701c2 kconfig: set title bar in xconfig
Put kernel version info on title bar in xconfig (qconf) instead of
defaulting to "qconf".

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-20 20:16:50 +02:00
Linus Torvalds e8b8c97773 Revert "kconfig: tristate choices with mixed tristate and boolean values"
This reverts commit a5bf3d891a.

David Brownell notes that this causes a regression visible in the
drivers/usb/gadget Kconfig file:

  "That Kconfig hasn't changed (other than adding new drivers), and it's
   worked that way for several years now ...  so the issue seems to be
   changes in menuconfig/kconfig/etc semantics.

   The issue is that when USB_GADGET=m, it's no longer possible to
   configure peripheral controller drivers as modules ...  the
   controller drivers can now only be configured for static linkage.

   It should be making a choice of one of the controller drivers which
   could work on the target system, and allow that driver to be linked
   either as a module (ok iff USB_GADGET=m) or statically."

Reverting this commit resolves the problem, and also fixes a second
problem that David noticed: various dependent options couldn't be enabled.

Tested-and-reported-by: David Brownell <david-b@pacbell.net>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Jan Beulich <jbeulich@novell.com>,
Cc: Andrew Morton <akpm@linux-foundation.org>,
Cc: Sam Ravnborg <sam@ravnborg.org>,
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 21:25:45 -07:00
Linus Torvalds 4800be295c Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
  kbuild: fix first module build
  kconfig: update kconfig-language text
  kbuild: introduce cc-cross-prefix
  kbuild: disable depmod in cross-compile kernel build
  kbuild: make deb-pkg - add 'Provides:' line
  kconfig: comment typo in scripts/kconfig/Makefile.
  kbuild: stop docproc segfaulting when SRCTREE isn't set.
  kbuild: modpost problem when symbols move from one module to another
  kbuild: cscope - filter out .tmp_* in find_sources
  kbuild: mailing list has moved
  kbuild: check asm symlink when building a kernel
2007-10-19 13:47:38 -07:00
Sam Ravnborg 910b40468a kbuild: introduce cc-cross-prefix
cc-cross-prefix is useful for the architecture that like
to provide a default CROSS_COMPILE value,
but may have several to select between.

Sample usage:

ifneq ($(SUBARCH),$(ARCH))
        ifeq ($(CROSS_COMPILE),)
               CROSS_COMPILE := $(call cc-cross-prefix, m68k-linux-gnu- m68k-linux-)
        endif
endif

Actual usage by the different archs will taken care of later.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-19 21:46:01 +02:00
Joern Engel 477116e69d fix a trivial typo in scripts/checkstack.pl
Trivial change in a comment.

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Andre Haupt <andre@finow14.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:34 -07:00
Andy Whitcroft 6c72ffaab9 update checkpatch.pl to version 0.11
This version brings a more cautious checkpatch.pl by default.  The more
subjective checks are only applied with the --strict option.  It also
brings the usual slew of corrections for false positives.  Of note:

  - new tree detection, the source tree will be found via the executable
  - a major revamp of the unary detection to make it more parser like
  - a new summary at the bottom of the report
  - --strict option for subjective checks
  - --file to enable checking on complete files
  - support for use in emacs "compile" window

Andy Whitcroft (27):
      Version: 0.11
      fix up cat_vet for the case where there are no control characters
      any cast to a pointer introduces a type
      cpp unary operator detection needs to float
      attributes are also valid in type definitions
      sizeof may be a bareword and makes its argument unary
      unary checks for #ifdef et al need to find end of line
      add new --file mode to handle raw source files
      add --strict/--subjective which enables the subjective tests
      add some additional standard type suffixes
      cpp #elif is also a unary prefix
      case is not a function name
      widen asm volatile exceptions
      __kprobes is a type attribute
      typeof is a unary operator
      function open parenthesis checks should check all occurances
      expand sizeof() binary exceptions
      linux/irq.h should not be recommended
      work harder to find the kernel root and add --root=
      fix --emacs mode line numbers and string concatenation warnings
      add a summary to the bottom of the main report
      loosen assignment in if checks
      update operator spacing to maintain tabs in output
      revamp unary detection
      corruption/line wrapped patches need only reporting once
      revamp s/u/be/le 8/16/32/64 bit types
      handle missing ,1 in uni-diff header

Mike D. Day (2):
      Adds support to checkpatch.pl for running in the emacs compile window.
      checkpatch: Fix line number reporting

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:21 -07:00
bugme-daemon@bugzilla.kernel.org 6f67a00498 kbuild: make deb-pkg - add 'Provides:' line
http://bugzilla.kernel.org/show_bug.cgi?id=8941

Current Debian's kernel-modules depend on matching linux-image-$version, though
Linux's make deb-pkg build a .deb that 'Provides: kernel-image-$version' only.
The following patch adds the Debian-compliant 'Provides', leaving the default
one; hopely this will make way all happy.

Signed-off-by: paolo <oopla@users.sf.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-18 15:15:53 +02:00
Rob Landley e9e40e143c kconfig: comment typo in scripts/kconfig/Makefile.
Typo in comment in scripts/kconfig/Makefile.

Signed-off-by: Rob Landley <rob@landley.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-18 14:31:50 +02:00
Rob Landley bb13be5145 kbuild: stop docproc segfaulting when SRCTREE isn't set.
Prevent docproc from segfaulting when SRCTREE isn't set.

Signed-off-by: Rob Landley <rob@landley.net>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-18 13:42:53 +02:00
Trent Piepho 4b21960f90 kbuild: modpost problem when symbols move from one module to another
When part of build an external module tree, modpost first reads in the
kernel's and then the external tree's Module.symvers files.  From these files
it establishes a symbol => module mapping.  When it later reads in each module
built and processes the symbols it finds, it discovers the symbol=>module
mapping from Module.symvers and leaves it as it is.

The problem comes with a module has been re-named or a symbol has moved from
one module to another, since the Module.symvers file was generated.  modpost
does not update the symbol=>module mapping when it finds the new location of
the symbol when scanning the newly built modules.  This results in the module
containing incorrect dependency information and the new Module.symvers file
written by modpost will also contain the incorrect mappings, perpetuating the
problem to the next build, and so on.

When building the out of kernel development tree for kernel subsystem, like
v4l-dvb or ALSA, deleting the external Module.symvers file before building
(which the kernel build system doesn't do and shouldn't be necessary anyway),
won't fix the problem.  modpost still reads the kernel's Module.symvers, and
since we a building a kernel subsystem, it will define the same symbols as the
external modules.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-18 13:35:49 +02:00
Randy Dunlap 6b5b55f6c4 kernel-doc: fix doc blocks and html
Johannes Berg reports (Thanks!) that &struct names are not highlighted in
html output format when they are inside a DOC: block.

DOC: blocks were not escaped thru xml_escape() like other kernel-doc
comments were.  Fixed that.

However, that left a problem with <p> ($blankline_html) being processed
thru xml_escape(), converting it to &lt;p&gt;, which isn't good for the
generated html output (the <p> should remain unchanged), so this patch also
introduces the notion of "local" kernel-doc meta-characters
('\\\\mnemonic:'), which are converted to html just before writing the
stream to its output file.

Please report any problems that you (anyone) see in "highlighting" in any
output mode (text, man, html, xml).

Also update copyright to include me.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:43:05 -07:00
Andy Whitcroft 9c0ca6f9a0 update checkpatch.pl to version 0.10
This version brings a number of new checks, and a number of bug
fixes.  Of note:

  - better categorisation and space checks for dual use unary/binary
    operators
  - warn on deprecated use of {SPIN,RW}_LOCK_UNLOCKED
  - check if/for/while with trailing ';' for hanging statements
  - detect DOS line endings
  - detect redundant casts for kalloc()

Andy Whitcroft (18):
      Version: 0.10
      asmlinkage is also a storage type
      pull out inline specifiers
      allow only some operators before a unary operator
      parenthesised values may span line ends
      add additional attribute matching
      handle sparse annotations within pointer type space checks
      support alternative function definition syntax for typedefs
      check if/for/while with trailing ';' for hanging statements
      fix output format for case checks
      deprecate SPIN_LOCK_UNLOCKED and RW_LOCK_UNLOCKED
      allow complex macros with bracketing braces
      detect and report DOS line endings
      fastcall is a valid function attribute
      bracket spacing is ok for 'for'
      categorise operators into unary/binary/definitions
      add heuristic to pick up on unannotated types
      remove spurious warnings from cat_vet

Dave Jones (1):
      Make checkpatch warn about pointless casting of kalloc returns.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:56 -07:00
Mike Frysinger 1e9535a591 Add stack checking for Blackfin
Simply fill out the bits in checkstack.pl for Blackfin.  I thought I already
sent this, but I don't see it in -mm anywhere ...

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:54 -07:00