Commit Graph

2246 Commits

Author SHA1 Message Date
Suniel Mahesh d477bf3af1 cpufreq: dt: Fix sysfs duplicate filename creation for platform-device
ti-cpufreq and cpufreq-dt-platdev drivers are registering platform-device
with same name "cpufreq-dt" using platform_device_register_*() routines.
This is leading to build warnings appended below.

Providing hardware information to OPP framework along with the platform-
device creation should be done by ti-cpufreq driver before cpufreq-dt
driver comes into place.

This patch add's TI am33xx, am43 and dra7 platforms (which use opp-v2
property) to the blacklist of devices in cpufreq-dt-platform driver to
avoid creating platform-device twice and remove build warnings.

[    2.370167] ------------[ cut here ]------------
[    2.375087] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x58/0x78
[    2.383112] sysfs: cannot create duplicate filename '/devices/platform/cpufreq-dt'
[    2.391219] Modules linked in:
[    2.394506] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-next-20170912 #1
[    2.402006] Hardware name: Generic AM33XX (Flattened Device Tree)
[    2.408437] [<c0110a28>] (unwind_backtrace) from [<c010ca84>] (show_stack+0x10/0x14)
[    2.416568] [<c010ca84>] (show_stack) from [<c0827d64>] (dump_stack+0xac/0xe0)
[    2.424165] [<c0827d64>] (dump_stack) from [<c0137470>] (__warn+0xd8/0x104)
[    2.431488] [<c0137470>] (__warn) from [<c01374d0>] (warn_slowpath_fmt+0x34/0x44)
[    2.439351] [<c01374d0>] (warn_slowpath_fmt) from [<c03459d0>] (sysfs_warn_dup+0x58/0x78)
[    2.447938] [<c03459d0>] (sysfs_warn_dup) from [<c0345ab8>] (sysfs_create_dir_ns+0x80/0x98)
[    2.456719] [<c0345ab8>] (sysfs_create_dir_ns) from [<c082c554>] (kobject_add_internal+0x9c/0x2d4)
[    2.466124] [<c082c554>] (kobject_add_internal) from [<c082c7d8>] (kobject_add+0x4c/0x9c)
[    2.474712] [<c082c7d8>] (kobject_add) from [<c05803e4>] (device_add+0xcc/0x57c)
[    2.482489] [<c05803e4>] (device_add) from [<c0584b74>] (platform_device_add+0x100/0x220)
[    2.491085] [<c0584b74>] (platform_device_add) from [<c05855a8>] (platform_device_register_full+0xf4/0x118)
[    2.501305] [<c05855a8>] (platform_device_register_full) from [<c067023c>] (ti_cpufreq_init+0x150/0x22c)
[    2.511253] [<c067023c>] (ti_cpufreq_init) from [<c0101df4>] (do_one_initcall+0x3c/0x170)
[    2.519838] [<c0101df4>] (do_one_initcall) from [<c0c00eb4>] (kernel_init_freeable+0x1fc/0x2c4)
[    2.528974] [<c0c00eb4>] (kernel_init_freeable) from [<c083bcac>] (kernel_init+0x8/0x110)
[    2.537565] [<c083bcac>] (kernel_init) from [<c0107d18>] (ret_from_fork+0x14/0x3c)
[    2.545981] ---[ end trace 2fc00e213c13ab20 ]---
[    2.551051] ------------[ cut here ]------------
[    2.555931] WARNING: CPU: 0 PID: 1 at lib/kobject.c:240 kobject_add_internal+0x254/0x2d4
[    2.564578] kobject_add_internal failed for cpufreq-dt with -EEXIST, don't try to register
things with the same name in the same directory.
[    2.577977] Modules linked in:
[    2.581261] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W       4.13.0-next-20170912 #1
[    2.590013] Hardware name: Generic AM33XX (Flattened Device Tree)
[    2.596437] [<c0110a28>] (unwind_backtrace) from [<c010ca84>] (show_stack+0x10/0x14)
[    2.604573] [<c010ca84>] (show_stack) from [<c0827d64>] (dump_stack+0xac/0xe0)
[    2.612172] [<c0827d64>] (dump_stack) from [<c0137470>] (__warn+0xd8/0x104)
[    2.619494] [<c0137470>] (__warn) from [<c01374d0>] (warn_slowpath_fmt+0x34/0x44)
[    2.627362] [<c01374d0>] (warn_slowpath_fmt) from [<c082c70c>] (kobject_add_internal+0x254/0x2d4)
[    2.636666] [<c082c70c>] (kobject_add_internal) from [<c082c7d8>] (kobject_add+0x4c/0x9c)
[    2.645255] [<c082c7d8>] (kobject_add) from [<c05803e4>] (device_add+0xcc/0x57c)
[    2.653027] [<c05803e4>] (device_add) from [<c0584b74>] (platform_device_add+0x100/0x220)
[    2.661615] [<c0584b74>] (platform_device_add) from [<c05855a8>] (platform_device_register_full+0xf4/0x118)
[    2.671833] [<c05855a8>] (platform_device_register_full) from [<c067023c>] (ti_cpufreq_init+0x150/0x22c)
[    2.681779] [<c067023c>] (ti_cpufreq_init) from [<c0101df4>] (do_one_initcall+0x3c/0x170)
[    2.690377] [<c0101df4>] (do_one_initcall) from [<c0c00eb4>] (kernel_init_freeable+0x1fc/0x2c4)
[    2.699510] [<c0c00eb4>] (kernel_init_freeable) from [<c083bcac>] (kernel_init+0x8/0x110)
[    2.708106] [<c083bcac>] (kernel_init) from [<c0107d18>] (ret_from_fork+0x14/0x3c)
[    2.716217] ---[ end trace 2fc00e213c13ab21 ]---

Fixes: edeec420de (cpufreq: dt-cpufreq: platdev Automatically create device with OPP v2)
Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-09-26 01:10:08 +02:00
Dave Gerlach 039cc1c1eb cpufreq: ti-cpufreq: Support additional am43xx platforms
Rather than letting the ti-cpufreq driver match against 'ti,am4372'
machine compatible during probe let's match against 'ti,am43' so that we
can support both 'ti,am4372' and 'ti,am438x' platforms which both match
to this compatible.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-09-20 00:51:01 +02:00
Viresh Kumar ff76898c0a cpufreq: dt-platdev: Add some missing platforms to the blacklist
Commit edeec420de (cpufreq: dt-platdev: Automatically create cpufreq
device with OPP v2) missed adding few platforms to the blacklist which
create the cpufreq-dt device from their own drivers, after some
dependencies are sorted out.

And for those platforms, both the platform specific driver and the
cpufreq-dt-platdev driver try to create the cpufreq-dt device now.

Fix that by including those platforms in the blacklist. This doesn't include
the TI platforms, for which there is a separate patch.

Fixes: edeec420de (cpufreq: dt-cpufreq: platdev Automatically create device with OPP v2)
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-09-19 23:05:28 +02:00
Christoph Hellwig 6faadbbb7f dmi: Mark all struct dmi_system_id instances const
... and __initconst if applicable.

Based on similar work for an older kernel in the Grsecurity patch.

[JD: fix toshiba-wmi build]
[JD: add htcpen]
[JD: move __initconst where checkscript wants it]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
2017-09-14 11:59:30 +02:00
Linus Torvalds 53ac64aac9 ACPI updates for v4.14-rc1
- Update the ACPICA code in the kernel to upstream revision 20170728
    including:
    * Alias operator handling update (Bob Moore).
    * Deferred resolution of reference package elements (Bob Moore).
    * Support for the _DMA method in walk resources (Bob Moore).
    * Tables handling update and support for deferred table
      verification (Lv Zheng).
    * Update of SMMU models for IORT (Robin Murphy).
    * Compiler and disassembler updates (Alex James, Erik Schmauss,
      Ganapatrao Kulkarni, James Morse).
    * Tools updates (Erik Schmauss, Lv Zheng).
    * Assorted minor fixes and cleanups (Bob Moore, Kees Cook,
      Lv Zheng, Shao Ming).
 
  - Rework the initialization of non-wakeup GPEs with method handlers
    in order to address a boot crash on some systems with Thunderbolt
    devices connected at boot time where we miss an early hotplug
    event due to a delay in GPE enabling (Rafael Wysocki).
 
  - Rework the handling of PCI bridges when setting up ACPI-based
    device wakeup in order to avoid disabling wakeup for bridges
    prematurely (Rafael Wysocki).
 
  - Consolidate Apple DMI checks throughout the tree, add support for
    Apple device properties to the device properties framework and
    use these properties for the handling of I2C and SPI devices on
    Apple systems (Lukas Wunner).
 
  - Add support for _DMA to the ACPI-based device properties lookup
    code and make it possible to use the information from there to
    configure DMA regions on ARM64 systems (Lorenzo Pieralisi).
 
  - Fix several issues in the APEI code, add support for exporting
    the BERT error region over sysfs and update APEI MAINTAINERS
    entry with reviewers information (Borislav Petkov, Dongjiu Geng,
    Loc Ho, Punit Agrawal, Tony Luck, Yazen Ghannam).
 
  - Fix a potential initialization ordering issue in the ACPI EC
    driver and clean it up somewhat (Lv Zheng).
 
  - Update the ACPI SPCR driver to extend the existing XGENE 8250
    workaround in it to a new platform (m400) and to work around
    an Xgene UART clock issue (Graeme Gregory).
 
  - Add a new utility function to the ACPI core to support using
    ACPI OEM ID / OEM Table ID / Revision for system identification
    in blacklisting or similar and switch over the existing code
    already using this information to this new interface (Toshi Kani).
 
  - Fix an xpower PMIC issue related to GPADC reads that always return
    0 without extra pin manipulations (Hans de Goede).
 
  - Add statements to print debug messages in a couple of places in
    the ACPI core for easier diagnostics (Rafael Wysocki).
 
  - Clean up the ACPI processor driver slightly (Colin Ian King,
    Hanjun Guo).
 
  - Clean up the ACPI x86 boot code somewhat (Andy Shevchenko).
 
  - Add a quirk for Dell OptiPlex 9020M to the ACPI backlight
    driver (Alex Hung).
 
  - Assorted fixes, cleanups and updates related to ACPI (Amitoj Kaur
    Chawla, Bhumika Goyal, Frank Rowand, Jean Delvare, Punit Agrawal,
    Ronald Tschalär, Sumeet Pawnikar).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJZrcE+AAoJEILEb/54YlRxVGAP/RKzkJlYlOIXtMjf4XWg5ZfJ
 RKZA68E9DW179KoBoTCVPD6/eD5UoEJ7fsWXFU2Hgp2xL3N1mZMAJHgAE4GoAwCx
 uImoYvQgdPna7DawzRIFkvkfceYxNyh+KaV9s7xne4hAwsB7JzP9yf5Ywll53+oF
 Le27/r6lDOaWhG7uYcxSabnQsWZQkBF5mj2GPzEpKDIHcLA1Vii0URzm7mAHdZsz
 vGjYhxrshKYEVdkLSRn536m1rEfp2fqsRJ5wqNAazZJr6Cs1WIfNVuv/RfduRJpG
 /zHIRAmgKV+3jp39cBpjdnexLczb1rGiCV1yZOvwCNM7jy4evL8vbL7VgcUCopaj
 fHbF34chNG/hKJd3Zn3RRCTNzCs6bv+txslOMARxji5eyr2Q4KuVnvg5LM4hxOUP
 23FvcYkBYWu4QCNLOTnC7y2OqK6WzOvDpfi7hf13Z42iNzeAUbwt1sVF0/OCwL51
 Og6blSy2x8FidKp8oaBBboBzHEiKWnXBj/Hw8KEHVcsqZv1ZC6igNRAL3tjxamU8
 98/Z2NSZHYPrrrn13tT9ywISYXReXzUF85787+0ofugvDe8/QyBH6UhzzZc/xKVA
 t329JEjEFZZSLgxMIIa9bXoQANxkeZEGsxN6FfwvQhyIVdagLF3UvCjZl/q2NScC
 9n++s32qfUBRHetGODWc
 =6Ke9
 -----END PGP SIGNATURE-----

Merge tag 'acpi-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These include a usual ACPICA code update (this time to upstream
  revision 20170728), a fix for a boot crash on some systems with
  Thunderbolt devices connected at boot time, a rework of the handling
  of PCI bridges when setting up device wakeup, new support for Apple
  device properties, support for DMA configurations reported via ACPI on
  ARM64, APEI-related updates, ACPI EC driver updates and assorted minor
  modifications in several places.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20170728
     including:
      * Alias operator handling update (Bob Moore).
      * Deferred resolution of reference package elements (Bob Moore).
      * Support for the _DMA method in walk resources (Bob Moore).
      * Tables handling update and support for deferred table
        verification (Lv Zheng).
      * Update of SMMU models for IORT (Robin Murphy).
      * Compiler and disassembler updates (Alex James, Erik Schmauss,
        Ganapatrao Kulkarni, James Morse).
      * Tools updates (Erik Schmauss, Lv Zheng).
      * Assorted minor fixes and cleanups (Bob Moore, Kees Cook, Lv
        Zheng, Shao Ming).

   - Rework the initialization of non-wakeup GPEs with method handlers
     in order to address a boot crash on some systems with Thunderbolt
     devices connected at boot time where we miss an early hotplug event
     due to a delay in GPE enabling (Rafael Wysocki).

   - Rework the handling of PCI bridges when setting up ACPI-based
     device wakeup in order to avoid disabling wakeup for bridges
     prematurely (Rafael Wysocki).

   - Consolidate Apple DMI checks throughout the tree, add support for
     Apple device properties to the device properties framework and use
     these properties for the handling of I2C and SPI devices on Apple
     systems (Lukas Wunner).

   - Add support for _DMA to the ACPI-based device properties lookup
     code and make it possible to use the information from there to
     configure DMA regions on ARM64 systems (Lorenzo Pieralisi).

   - Fix several issues in the APEI code, add support for exporting the
     BERT error region over sysfs and update APEI MAINTAINERS entry with
     reviewers information (Borislav Petkov, Dongjiu Geng, Loc Ho, Punit
     Agrawal, Tony Luck, Yazen Ghannam).

   - Fix a potential initialization ordering issue in the ACPI EC driver
     and clean it up somewhat (Lv Zheng).

   - Update the ACPI SPCR driver to extend the existing XGENE 8250
     workaround in it to a new platform (m400) and to work around an
     Xgene UART clock issue (Graeme Gregory).

   - Add a new utility function to the ACPI core to support using ACPI
     OEM ID / OEM Table ID / Revision for system identification in
     blacklisting or similar and switch over the existing code already
     using this information to this new interface (Toshi Kani).

   - Fix an xpower PMIC issue related to GPADC reads that always return
     0 without extra pin manipulations (Hans de Goede).

   - Add statements to print debug messages in a couple of places in the
     ACPI core for easier diagnostics (Rafael Wysocki).

   - Clean up the ACPI processor driver slightly (Colin Ian King, Hanjun
     Guo).

   - Clean up the ACPI x86 boot code somewhat (Andy Shevchenko).

   - Add a quirk for Dell OptiPlex 9020M to the ACPI backlight driver
     (Alex Hung).

   - Assorted fixes, cleanups and updates related to ACPI (Amitoj Kaur
     Chawla, Bhumika Goyal, Frank Rowand, Jean Delvare, Punit Agrawal,
     Ronald Tschalär, Sumeet Pawnikar)"

* tag 'acpi-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits)
  ACPI / APEI: Suppress message if HEST not present
  intel_pstate: convert to use acpi_match_platform_list()
  ACPI / blacklist: add acpi_match_platform_list()
  ACPI, APEI, EINJ: Subtract any matching Register Region from Trigger resources
  ACPI: make device_attribute const
  ACPI / sysfs: Extend ACPI sysfs to provide access to boot error region
  ACPI: APEI: fix the wrong iteration of generic error status block
  ACPI / processor: make function acpi_processor_check_duplicates() static
  ACPI / EC: Clean up EC GPE mask flag
  ACPI: EC: Fix possible issues related to EC initialization order
  ACPI / PM: Add debug statements to acpi_pm_notify_handler()
  ACPI: Add debug statements to acpi_global_event_handler()
  ACPI / scan: Enable GPEs before scanning the namespace
  ACPICA: Make it possible to enable runtime GPEs earlier
  ACPICA: Dispatch active GPEs at init time
  ACPI: SPCR: work around clock issue on xgene UART
  ACPI: SPCR: extend XGENE 8250 workaround to m400
  ACPI / LPSS: Don't abort ACPI scan on missing mem resource
  mailbox: pcc: Drop uninformative output during boot
  ACPI/IORT: Add IORT named component memory address limits
  ...
2017-09-05 12:45:03 -07:00
Rafael J. Wysocki ab271bc95b Merge branch 'intel_pstate'
* intel_pstate:
  cpufreq: intel_pstate: Shorten a couple of long names
  cpufreq: intel_pstate: Simplify intel_pstate_adjust_pstate()
  cpufreq: intel_pstate: Improve IO performance with per-core P-states
  cpufreq: intel_pstate: Drop INTEL_PSTATE_HWP_SAMPLING_INTERVAL
  cpufreq: intel_pstate: Drop ->update_util from pstate_funcs
  cpufreq: intel_pstate: Do not use PID-based P-state selection
2017-09-04 00:05:42 +02:00
Rafael J. Wysocki 08a10002be Merge branch 'pm-cpufreq-sched'
* pm-cpufreq-sched:
  cpufreq: schedutil: Always process remote callback with slow switching
  cpufreq: schedutil: Don't restrict kthread to related_cpus unnecessarily
  cpufreq: Return 0 from ->fast_switch() on errors
  cpufreq: Simplify cpufreq_can_do_remote_dvfs()
  cpufreq: Process remote callbacks from any CPU if the platform permits
  sched: cpufreq: Allow remote cpufreq callbacks
  cpufreq: schedutil: Use unsigned int for iowait boost
  cpufreq: schedutil: Make iowait boost more energy efficient
2017-09-04 00:05:22 +02:00
Rafael J. Wysocki bd87c8fb9d Merge branch 'pm-cpufreq'
* pm-cpufreq: (33 commits)
  cpufreq: imx6q: Fix imx6sx low frequency support
  cpufreq: speedstep-lib: make several arrays static, makes code smaller
  cpufreq: ti: Fix 'of_node_put' being called twice in error handling path
  cpufreq: dt-platdev: Drop few entries from whitelist
  cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2
  ARM: ux500: don't select CPUFREQ_DT
  cpufreq: Convert to using %pOF instead of full_name
  cpufreq: Cap the default transition delay value to 10 ms
  cpufreq: dbx500: Delete obsolete driver
  mfd: db8500-prcmu: Get rid of cpufreq dependency
  cpufreq: enable the DT cpufreq driver on the Ux500
  cpufreq: Loongson2: constify platform_device_id
  cpufreq: dt: Add r8a7796 support to to use generic cpufreq driver
  cpufreq: remove setting of policy->cpu in policy->cpus during init
  cpufreq: mediatek: add support of cpufreq to MT7622 SoC
  cpufreq: mediatek: add cleanups with the more generic naming
  cpufreq: rcar: Add support for R8A7795 SoC
  cpufreq: dt: Add rk3328 compatible to use generic cpufreq driver
  cpufreq: s5pv210: add missing of_node_put()
  cpufreq: Allow dynamic switching with CPUFREQ_ETERNAL latency
  ...
2017-09-04 00:05:13 +02:00
Toshi Kani 5e93232194 intel_pstate: convert to use acpi_match_platform_list()
Convert to use acpi_match_platform_list() for the platform check.
There is no change in functionality.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-29 01:42:49 +02:00
Leonard Crestez fded5fc841 cpufreq: imx6q: Fix imx6sx low frequency support
This patch contains the minimal changes required to support imx6sx OPP
of 198 Mhz. Without this patch cpufreq still reports success but the
frequency is not changed, the "arm" clock will still be at 396000000 in
clk_summary.

In order to do this PLL1 needs to be still kept enabled while changing
the ARM clock. This is a hardware requirement: when ARM_PODF is changed
in CCM we need to check the busy bit of CCM_CDHIPR bit 16 arm_podf_busy,
and this bit is sync with PLL1 clock, so if PLL1 NOT enabled, this
bit will never get clear.

Keep pll1_sys explicitly enabled until after the rate is change to deal
with this. Otherwise from the clk framework perspective pll1_sys is
unused and gets turned off.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-29 00:22:52 +02:00
Colin Ian King 843791bb6c cpufreq: speedstep-lib: make several arrays static, makes code smaller
Don't populate arrays on the stack, instead make them static.
Makes the object code smaller by over 860 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  10716	   5196	      0	  15912	   3e28	drivers/cpufreq/speedstep-lib.o

After:
   text	   data	    bss	    dec	    hex	filename
   9690	   5356	      0	  15046	   3ac6	drivers/cpufreq/speedstep-lib.o

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-29 00:21:41 +02:00
Christophe Jaillet 9a6e91d08e cpufreq: ti: Fix 'of_node_put' being called twice in error handling path
If 'dev_pm_opp_set_supported_hw()' fails, 'opp_data->opp_node' refcount
will be decremented 2 times.
One, just a few lines above, and another one in the error handling path.

Fix it by simply moving the 'of_node_put' call of the normal path.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-25 01:43:07 +02:00
Viresh Kumar d79d148b64 cpufreq: dt-platdev: Drop few entries from whitelist
Drop few ARM (32 and 64 bit) platforms from the whitelist which always
use "operating-points-v2" property from their DT. They should continue
to work after this patch.

Tested on Hikey platform (only the "hisilicon,hi6220" entry).

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-25 01:41:03 +02:00
Viresh Kumar edeec420de cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2
The initial idea of creating the cpufreq-dt-platdev.c file was to keep a
list of platforms that use the "operating-points" (V1) bindings and
create cpufreq device for them only, as we weren't sure which platforms
would want the device to get created automatically as some had their own
cpufreq drivers as well, or wanted to initialize cpufreq after doing
some stuff from platform code.

But that wasn't the case with platforms using "operating-points-v2"
property. We wanted the device to get created automatically without the
need of adding them to the whitelist. Though, we will still have some
exceptions where we don't want to create the device automatically.

Rename the earlier platform list as *whitelist* and create a new
*blacklist* as well.

The cpufreq-dt device will get created if:
- The platform is there in the whitelist OR
- The platform has "operating-points-v2" property in CPU0's DT node and
  isn't part of the blacklist .

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-25 01:41:03 +02:00
Rob Herring cc5a7a7494 cpufreq: Convert to using %pOF instead of full_name
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-25 01:20:46 +02:00
Viresh Kumar e948bc8fbe cpufreq: Cap the default transition delay value to 10 ms
If transition_delay_us isn't defined by the cpufreq driver, the default
value of transition delay (time after which the cpufreq governor will
try updating the frequency again) is currently calculated by multiplying
transition_latency (nsec) with LATENCY_MULTIPLIER (1000) and then
converting this time to usec. That gives the exact same value as
transition_latency, just that the time unit is usec instead of nsec.

With acpi-cpufreq for example, transition_latency is set to around 10
usec and we get transition delay as 10 ms. Which seems to be a
reasonable amount of time to reevaluate the frequency again.

But for platforms where frequency switching isn't that fast (like ARM),
the transition_latency varies from 500 usec to 3 ms, and the transition
delay becomes 500 ms to 3 seconds. Of course, that is a pretty bad
default value to start with.

We can try to come across a better formula (instead of multiplying with
LATENCY_MULTIPLIER) to solve this problem, but will that be worth it ?

This patch tries a simple approach and caps the maximum value of default
transition delay to 10 ms. Of course, userspace can still come in and
change this value anytime or individual drivers can rather provide
transition_delay_us instead.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-22 15:50:03 +02:00
Linus Walleij 919096f7f3 cpufreq: dbx500: Delete obsolete driver
We have moved the Ux500 over to use the generic DT based
cpufreq driver, so delete the old custom driver.

At the same time select CPUFREQ_DT from the machine's
Kconfig in order to satisfy the "default ARCH_U8500"
selection on the old driver.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-22 15:50:02 +02:00
Rafael J. Wysocki 57ccaf3384 Merge back intel_pstate material for v4.14. 2017-08-21 01:50:20 +02:00
Linus Walleij ff6c349f74 cpufreq: enable the DT cpufreq driver on the Ux500
This enables the generic DT and OPP-based cpufreq driver on the
ST-Ericsson Ux500 series.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-18 01:46:40 +02:00
Arvind Yadav a804d51004 cpufreq: Loongson2: constify platform_device_id
platform_device_id are not supposed to change at runtime. All functions
working with platform_device_id provided by <linux/platform_device.h>
work with const platform_device_id. So mark the non-const structs as
const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-18 01:44:21 +02:00
Khiem Nguyen bea2ebca6b cpufreq: dt: Add r8a7796 support to to use generic cpufreq driver
This patch adds the r8a7796 support the generic cpufreq driver
by adding an appropriate compat string. This is in keeping
with support for other Renesas ARM and arm64 based SoCs.

Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@rvc.renesas.com>
[simon: new changelog]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-18 01:42:46 +02:00
Sudeep Holla b20a3f3d8a cpufreq: remove setting of policy->cpu in policy->cpus during init
policy->cpu is copied into policy->cpus in cpufreq_online() before
calling into cpufreq_driver->init(). So there's no need to set the
same in the individual driver init() functions again.

This patch removes the redundant setting of policy->cpu in policy->cpus
in intel_pstate and cppc drivers.

Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-18 01:41:37 +02:00
Doug Smythies c587c79f90 cpufreq: intel_pstate: report correct CPU frequencies during trace
The intel_pstate CPU frequency scaling driver has always
calculated CPU frequency incorrectly.  Recent changes have
eliminted most of the issues, however the frequency reported
in the trace buffer, if used, is incorrect.

It remains desireable that cpu->pstate.scaling still be a nice
round number for things such as when setting max and min frequencies.
So the proposal is to just fix the reported frequency in the trace data.

Fixes what remains of [1].

Link: https://bugzilla.kernel.org/show_bug.cgi?id=96521 # [1]
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-11 01:25:53 +02:00
Sean Wang ccc03d86e2 cpufreq: mediatek: add support of cpufreq to MT7622 SoC
MT7622 is a 64-bit ARMv8 based dual-core SoC (2 * Cortex-A53) with a
single cluster. The hardware is also compatible with the current driver,
so add MT7622 as one of the compatible string list.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-10 01:29:53 +02:00
Sean Wang 862e0104f4 cpufreq: mediatek: add cleanups with the more generic naming
Since more MediaTek SoCs can be supported with the cpufreq driver and not
limited to MT8173, a couple of cleanups are done here with renaming those
functions and related structures with "mtk" instead of "mt8173".

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-10 01:29:53 +02:00
Viresh Kumar 209887e6b9 cpufreq: Return 0 from ->fast_switch() on errors
CPUFREQ_ENTRY_INVALID is a special symbol which is used to specify that
an entry in the cpufreq table is invalid. But using it outside of the
scope of the cpufreq table looks a bit incorrect.

We can represent an invalid frequency by writing it as 0 instead if we
need. Note that it is already done that way for the return value of the
->get() callback.

Lets do the same for ->fast_switch() and not use CPUFREQ_ENTRY_INVALID
outside of the scope of cpufreq table.

Also update the comment over cpufreq_driver_fast_switch() to clearly
mention what this returns.

None of the drivers return CPUFREQ_ENTRY_INVALID as of now from
->fast_switch() callback and so we don't need to update any of those.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-10 01:26:35 +02:00
Rafael J. Wysocki d77d4888cb cpufreq: intel_pstate: Shorten a couple of long names
The names of the INTEL_PSTATE_DEFAULT_SAMPLING_INTERVAL symbol and
the get_target_pstate_use_cpu_load() function don't need to be so
long any more, so make them shorter.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-10 01:09:16 +02:00
Rafael J. Wysocki a891283e56 cpufreq: intel_pstate: Simplify intel_pstate_adjust_pstate()
Since there is only one P-state selection routine in intel_pstate
now, make intel_pstate_adjust_pstate() call it directly and drop
the target_pstate argument from that function.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-10 01:08:56 +02:00
Khiem Nguyen 034def597b cpufreq: rcar: Add support for R8A7795 SoC
After the commit "a399dc9fc50 cpufreq: shmobile: Use generic platdev
driver", will use cpufreq-dt-platdev driver to enable cpufreq-dt support.
Hence, follow the implementation to support new R8A7795 SoC.

Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@rvc.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-08 17:09:54 +02:00
Rafael J. Wysocki 3714c281c6 Merge v4.13 intel_pstate fixes. 2017-08-04 14:28:58 +02:00
Finley Xiao 319af40a00 cpufreq: dt: Add rk3328 compatible to use generic cpufreq driver
This patch adds the rk3328 compatible string for supporting
the generic cpufreq driver on RK3328.

Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-04 14:22:43 +02:00
Srinivas Pandruvada 7bde2d5001 cpufreq: intel_pstate: Improve IO performance with per-core P-states
In the current implementation, the response latency between seeing
SCHED_CPUFREQ_IOWAIT set and the actual P-state adjustment can be up
to 10ms.  It can be reduced by bumping up the P-state to the max at
the time SCHED_CPUFREQ_IOWAIT is passed to intel_pstate_update_util().
With this change, the IO performance improves significantly.

For a simple "grep -r . linux" (Here linux is the kernel source
folder) with caches dropped every time on a Broadwell Xeon workstation
with per-core P-states, the user and system time is shorter by as much
as 30% - 40%.

The same performance difference was not observed on clients that don't
support per-core P-state.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-04 13:58:57 +02:00
Rafael J. Wysocki 8a05c3115d Merge branches 'pm-cpufreq-x86', 'pm-cpufreq-docs' and 'intel_pstate'
* pm-cpufreq-x86:
  cpufreq: x86: Make scaling_cur_freq behave more as expected

* pm-cpufreq-docs:
  cpufreq: docs: Add missing cpuinfo_cur_freq description

* intel_pstate:
  cpufreq: intel_pstate: Drop ->get from intel_pstate structure
2017-08-03 20:29:24 +02:00
Viresh Kumar 99d14d0e16 cpufreq: Process remote callbacks from any CPU if the platform permits
On many platforms, CPUs can do DVFS across cpufreq policies. i.e CPU
from policy-A can change frequency of CPUs belonging to policy-B.

This is quite common in case of ARM platforms where we don't
configure any per-cpu register.

Add a flag to identify such platforms and update
cpufreq_can_do_remote_dvfs() to allow remote callbacks if this flag is
set.

Also enable the flag for cpufreq-dt driver which is used only on ARM
platforms currently.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Saravana Kannan <skannan@codeaurora.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-01 14:24:54 +02:00
Viresh Kumar 674e75411f sched: cpufreq: Allow remote cpufreq callbacks
With Android UI and benchmarks the latency of cpufreq response to
certain scheduling events can become very critical. Currently, callbacks
into cpufreq governors are only made from the scheduler if the target
CPU of the event is the same as the current CPU. This means there are
certain situations where a target CPU may not run the cpufreq governor
for some time.

One testcase to show this behavior is where a task starts running on
CPU0, then a new task is also spawned on CPU0 by a task on CPU1. If the
system is configured such that the new tasks should receive maximum
demand initially, this should result in CPU0 increasing frequency
immediately. But because of the above mentioned limitation though, this
does not occur.

This patch updates the scheduler core to call the cpufreq callbacks for
remote CPUs as well.

The schedutil, ondemand and conservative governors are updated to
process cpufreq utilization update hooks called for remote CPUs where
the remote CPU is managed by the cpufreq policy of the local CPU.

The intel_pstate driver is updated to always reject remote callbacks.

This is tested with couple of usecases (Android: hackbench, recentfling,
galleryfling, vellamo, Ubuntu: hackbench) on ARM hikey board (64 bit
octa-core, single policy). Only galleryfling showed minor improvements,
while others didn't had much deviation.

The reason being that this patch only targets a corner case, where
following are required to be true to improve performance and that
doesn't happen too often with these tests:

- Task is migrated to another CPU.
- The task has high demand, and should take the target CPU to higher
  OPPs.
- And the target CPU doesn't call into the cpufreq governor until the
  next tick.

Based on initial work from Steve Muckle.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Saravana Kannan <skannan@codeaurora.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-01 14:24:53 +02:00
Rafael J. Wysocki f5c13f44c7 cpufreq: intel_pstate: Drop INTEL_PSTATE_HWP_SAMPLING_INTERVAL
After commit 62611cb912 (intel_pstate: delete scheduler hook in HWP
mode) the INTEL_PSTATE_HWP_SAMPLING_INTERVAL is not used anywhere in
the code, so drop it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-01 14:14:03 +02:00
Rafael J. Wysocki 22baebd489 cpufreq: intel_pstate: Drop ->get from intel_pstate structure
The ->get callback in the intel_pstate structure was mostly there
for the scaling_cur_freq sysfs attribute to work, but after commit
f8475cef90 (x86: use common aperfmperf_khz_on_cpu() to calculate
KHz using APERF/MPERF) that attribute uses arch_freq_get_on_cpu()
provided by the x86 arch code on all processors supported by
intel_pstate, so it doesn't need the ->get callback from the
driver any more.

Moreover, the very presence of the ->get callback in the intel_pstate
structure causes the cpuinfo_cur_freq attribute to be present when
intel_pstate operates in the active mode, which is bogus, because
the role of that attribute is to return the current CPU frequency
as seen by the hardware.  For intel_pstate, though, this is just an
average frequency and not really current, but computed for the
previous sampling interval (the actual current frequency may be
way different at the point this value is obtained by reading from
cpuinfo_cur_freq), and after commit 82b4e03e01 (intel_pstate: skip
scheduler hook when in "performance" mode) the value in
cpuinfo_cur_freq may be stale or just 0, depending on the driver's
operation mode.  In fact, however, on the hardware supported by
intel_pstate there is no way to read the current CPU frequency
from it, so the cpuinfo_cur_freq attribute should not be present
at all when this driver is in use.

For this reason, drop intel_pstate_get() and clear the ->get
callback pointer pointing to it, so that the cpuinfo_cur_freq is
not present for intel_pstate in the active mode any more.

Fixes: 82b4e03e01 (intel_pstate: skip scheduler hook when in "performance" mode)
Reported-by: Huaisheng Ye <yehs1@lenovo.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2017-07-27 23:51:58 +02:00
Julia Lawall 38c1c6a9f3 cpufreq: s5pv210: add missing of_node_put()
for_each_compatible_node performs an of_node_get on each iteration, so a
return from the loop requires an of_node_put.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
local idexpression n;
expression e,e1,e2;
statement S;
iterator i1;
iterator name for_each_compatible_node;
@@

 for_each_compatible_node(n,e1,e2) {
   ...
(
   of_node_put(n);
|
   e = n
|
   return n;
|
   i1(...,n,...) S
|
+  of_node_put(n);
?  return ...;
)
   ...
 }
// </smpl>

Additionally, call of_node_put on the previous value of np, obtained from
of_find_compatible_node, that is no longer accessible at the point of the
for_each_compatible_node.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-26 22:54:01 +02:00
Rafael J. Wysocki c4f3f70cac cpufreq: intel_pstate: Drop ->update_util from pstate_funcs
All systems use the same P-state selection "powersave" algorithm
in the active mode if HWP is not used, so there's no need to provide
a pointer for it in struct pstate_funcs any more.

Drop ->update_util from struct pstate_funcs and make
intel_pstate_set_update_util_hook() use intel_pstate_update_util()
directly.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-26 20:42:50 +02:00
Rafael J. Wysocki 9d0ef7af1f cpufreq: intel_pstate: Do not use PID-based P-state selection
All systems with a defined ACPI preferred profile that are not
"servers" have been using the load-based P-state selection algorithm
in intel_pstate since 4.12-rc1 (mobile systems and laptops have been
using it since 4.10-rc1) and no problems with it have been reported
to date.  In particular, no regressions with respect to the PID-based
P-state selection have been reported.  Also testing indicates that
the P-state selection algorithm based on CPU load is generally on par
with the PID-based algorithm performance-wise, and for some workloads
it turns out to be better than the other one, while being more
straightforward and easier to understand at the same time.

Moreover, the PID-based P-state selection algorithm in intel_pstate
is known to be unstable in some situation and generally problematic,
the issues with it are hard to address and it has become a
significant maintenance burden.

For these reasons, make intel_pstate use the "powersave" P-state
selection algorithm based on CPU load in the active mode on all
systems and drop the PID-based P-state selection code along with
all things related to it from the driver.  Also update the
documentation accordingly.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-26 20:42:50 +02:00
Viresh Kumar fc4c709fc8 cpufreq: Allow dynamic switching with CPUFREQ_ETERNAL latency
With the recent updates, CPUFREQ_ETERNAL is only used by the drivers
which don't know their transition latency but want to use dynamic
switching.

Anyway, the routine cpufreq_policy_transition_delay_us() caps the value
of transition latency to 10 ms now and that can be used safely with such
platforms.

Remove the check from cpufreq_init_governor() and allow dynamic
switching for such configurations as well.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-26 00:15:47 +02:00
Viresh Kumar fe829ed8ef cpufreq: Add CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING cpufreq driver flag
The policy->transition_latency field is used for multiple purposes
today and its not straight forward at all. This is how it is used:

A. Set the correct transition_latency value.

B. Set it to CPUFREQ_ETERNAL because:
   1. We don't want automatic dynamic switching (with
      ondemand/conservative) to happen at all.
   2. We don't know the transition latency.

This patch handles the B.1. case in a more readable way. A new flag for
the cpufreq drivers is added to disallow use of cpufreq governors which
have dynamic_switching flag set.

All the current cpufreq drivers which are setting transition_latency
unconditionally to CPUFREQ_ETERNAL are updated to use it. They don't
need to set transition_latency anymore.

There shouldn't be any functional change after this patch.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-26 00:15:46 +02:00
Viresh Kumar ed4676e254 cpufreq: Replace "max_transition_latency" with "dynamic_switching"
There is no limitation in the ondemand or conservative governors which
disallow the transition_latency to be greater than 10 ms.

The max_transition_latency field is rather used to disallow automatic
dynamic frequency switching for platforms which didn't wanted these
governors to run.

Replace max_transition_latency with a boolean (dynamic_switching) and
check for transition_latency == CPUFREQ_ETERNAL along with that. This
makes it pretty straight forward to read/understand now.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-26 00:15:45 +02:00
Viresh Kumar 768608a578 cpufreq: arm_big_little: Make ->get_transition_latency() mandatory
All users of arm_big_little driver are defining it and there is no need
to keep it optional.

Make it mandatory to remove the always true conditional statement.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-26 00:15:44 +02:00
Viresh Kumar b8b78825a2 cpufreq: Don't set transition_latency for setpolicy drivers
The transition_latency field isn't used for drivers with ->setpolicy()
callback present and there is no point setting it from the drivers.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-26 00:15:43 +02:00
Viresh Kumar aa7519af45 cpufreq: Use transition_delay_us for legacy governors as well
The policy->transition_delay_us field is used only by the schedutil
governor currently, and this field describes how fast the driver wants
the cpufreq governor to change CPUs frequency. It should rather be a
common thing across all governors, as it doesn't have any schedutil
dependency here.

Create a new helper cpufreq_policy_transition_delay_us() to get the
transition delay across all governors.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-22 02:25:20 +02:00
Viresh Kumar 2d04503632 cpufreq: governor: Drop min_sampling_rate
The cpufreq core and governors aren't supposed to set a limit on how
fast we want to try changing the frequency. This is currently done for
the legacy governors with help of min_sampling_rate.

At worst, we may end up setting the sampling rate to a value lower than
the rate at which frequency can be changed and then one of the CPUs in
the policy will be only changing frequency for ever.

But that is something for the user to decide and there is no need to
have special handling for such cases in the core. Leave it for the user
to figure out.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-22 02:25:20 +02:00
Marc Gonzalez 9dbd224f9e cpufreq: dt: Don't use generic platdev driver for tango
On tango platforms, firmware configures the CPU clock, and Linux is
then only allowed to use the cpu_clk_divider to change the frequency.
Build the OPP table dynamically at init, in order to support whatever
firmware throws at us.

Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-22 02:20:59 +02:00
Sean Wang 501c574f4e cpufreq: mediatek: Add support of cpufreq to MT2701/MT7623 SoC
MT2701/MT7623 is a 32-bit ARMv7 based quad-core (4 * Cortex-A7) with
single cluster and this hardware is also compatible with the existing
driver through enabling CPU frequency feature with operating-points-v2
bindings. Also, this driver actually supports all MediaTek SoCs, the
Kconfig menu entry and file name itself should be updated with more
generic name to drop "MT8173"

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-22 02:19:37 +02:00
Rafael J. Wysocki ffa64d5e0d Merge branches 'intel_pstate' and 'pm-domains'
* intel_pstate:
  cpufreq: intel_pstate: Correct the busy calculation for KNL

* pm-domains:
  PM / Domains: defer dev_pm_domain_set() until genpd->attach_dev succeeds if present
2017-07-20 18:57:15 +02:00