Commit Graph

25 Commits

Author SHA1 Message Date
Oleksij Rempel 8bc85a8714 spi: loopback-test: implement testing with no CS
To run spi-loopback-tests on HW without modifications, we need to
disable Chip Select. This should avoid surprising side effects for
SPI devices by testing patterns.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-26 13:08:56 +01:00
Colin Ian King 59a8831da3 spi: loopback-test: make several module parameters static
Several module parameters are local to the source, so make them
static. Cleans up several sparse warnings such as:

"symbol 'loop_req' was not declared. Should it be static?"

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-18 14:10:01 +01:00
Oleksij Rempel f12a616e0c spi: loopback-test: provide loop_req option.
Provide a module parameter to request internal loop by the SPI master
controller.
This should make loop testing easier without extra HW modification.

For test automation a logic analyzer is recommended for host
controller-independent verification.
An example test rig configuration and procedure:
  i.MX6S RIoRBoard           Logic Analyzer
  -----------------------------------------
  (J13  4) GND ------------- GND
  (J13  6) CSPI3-CLK ------> PIN 3
  (J13  8) CSPI3-MOSI <----- PIN 2
     ^ - internal loop configured by SPI_LOOP
     |   or can be user external jamper.
  (J13 10) CSPI3-MISO -----> PIN 1

grab some data and decode it:
sigrok-cli -d fx2lafw --time 160000 --config samplerate=10m  \
  --channels 0-2 -o dump.sr
sigrok-cli -i dump.sr -P spi:mosi=1:clk=2 > result_for_regression_tests

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-17 15:27:26 +01:00
Arvind Yadav 704c3098e4 spi: loopback-test: Fix kfree() NULL pointer error.
Here, rx/tx allocation can fail. So avoid kvfree call
with NULL pointer.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-28 20:16:41 +01:00
Colin Ian King 478de2ba0d spi: loopback-test: fix spelling mistake: "reruning" -> "rerunning"
trivial fix to spelling mistake in dev_info error message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-28 20:03:09 +01:00
Mark Brown d8f520727f Merge remote-tracking branches 'spi/topic/spidev', 'spi/topic/spidev-test', 'spi/topic/sunxi', 'spi/topic/tegra' and 'spi/topic/test' into spi-next 2017-04-26 15:58:16 +01:00
Colin Ian King 905e0b5ef9 spi: loopback-test: fix spelling mistake: "minimam" -> "minimum"
trivial fix to spelling mistake in dev_err error message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-30 11:15:53 +01:00
Colin Ian King d2c14c64d6 spi: loopback-test: fix potential integer overflow on multiple
A multiplication of 8U * xfer-len with the type of a 32 bit unsigned int
is evaluated using 32 bit arithmetic and then used in a context that
expects an expression of type unsigned long long (64 bits).  Avoid any
potential overflow by casting BITS_PER_BYTE to unsigned long long.

Detected by CoverityScan, CID#1419691 ("Unintentional integer overflow")

Fixes: ea9936f324 ("spi: loopback-test: add elapsed time check")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-20 16:11:39 +00:00
Akinobu Mita 8687113e15 spi: loopback-test: add test spi_message with delay after transfers
This adds a new test to check whether the spi_transfer.delay_usecs
setting has properly taken effect.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-17 21:54:12 +00:00
Akinobu Mita ea9936f324 spi: loopback-test: add elapsed time check
This adds checks whether the elapsed time is longer than the minimam
estimated time.  The estimated time is calculated with the total
transfer length per clock rate and optional spi_transfer.delay_usecs.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-17 21:54:08 +00:00
Akinobu Mita 8916671e93 spi: loopback-test: add ability to test zero-length transfer
The spi-loopback-test module currently cannot test the spi_message
including a zero-length transfer.  Because the zero-length transfer is
treated as a special value in several meanings.

1. The number of spi_transfer to execute in one test case is described
by spi_test.transfer_count.  It is normally computed by counting number
of transfers with len > 0 in spi_test.transfers array.

This change stops the detection for the number of spi_transfer.  Each
spi_test.transfer_count needs to be filled by hand now.

2. The spi_test.iterate_len is a list of transfer length to iterate on.
This list is terminated by zero, so zero-length transfer cannot be
included.

This changes the terminal value from 0 to -1.

3. The length for the spi_transfer masked by spi_test.iterate_transfer_mask
is iterated.  Before starting the iteration, the default value which
is statically initialized is applied.  In order to specify the default
value, zero-length is reserved.

Currently, the default values are always '1'.  So this removes this
trick and add '1' to iterate_len list.

By applying all these changes, the spi-loopback-test can execute spi
messages with zero-length transfer.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-17 21:54:00 +00:00
Akinobu Mita 8494801db1 spi: loopback-test: don't skip comparing the first byte of rx_buf
When the loopback parameter is set, rx_buf are compared with tx_buf
after the spi_message is executed.  But the first byte of buffer is
not checked.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-17 21:53:56 +00:00
Akinobu Mita c4e121aeb7 spi: loopback-test: correct mismatched test description and configuration
The test "two tx-transfers - alter first" actually alters the second
not the first transfer.  Similarly the test "two tx-transfers - alter
second" actually alters the first not the second transfer.

The mismatches for the two symmetrical tests cancel each other's
mistakes.  But it's better to fix the mismatches to avoid confusion.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-17 21:53:53 +00:00
Frode Isaksen e542f7e63c spi: loopback-test: fix compile error on x86
Fix compile error caused by missing vmalloc() definition
on x86 (and maybe other platforms) by including vmalloc.h.

Signed-off-by: Frode Isaksen <fisaksen@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-17 13:06:12 +00:00
Frode Isaksen 576333a1fb spi: loopback-test: add option to use vmalloc'ed buffers
Using vmalloc'ed buffers will use one SG entry for each page,
that may provoke DMA errors for large transfers.
Also vmalloc'ed buffers may cause errors on CPU's with VIVT cache.
Add this option to catch these errors when testing.
Note that to catch VIVT cache errors, checking the rx range
has to be disabled, so this option has been added as well.

Signed-off-by: Frode Isaksen <fisaksen@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15 19:35:53 +00:00
Baoyou Xie dc34b89a8c spi: loopback-test: mark rx_ranges_cmp() static
We get 1 warning when building kernel with W=1:
drivers/spi/spi-loopback-test.c:408:5: warning: no previous prototype for 'rx_ranges_cmp' [-Wmissing-prototypes]

In fact, this function is only used in the file in which it is
declared and don't need a declaration, but can be made static.
So this patch marks it 'static'.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01 20:54:54 +01:00
Colin Ian King b7ddfb9f49 spi: loopback-test: fix spelling mistake: "missmatch" -> "mismatch"
trivial fix to spelling mistake in dev_err message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-28 19:40:53 +01:00
Arnd Bergmann ebea7c0545 spi: fix counting in spi-loopback-test code
These variables are always used uninitialized:

drivers/spi/spi-loopback-test.c: In function 'spi_test_run_iter':
drivers/spi/spi-loopback-test.c:768:17: warning: 'rx_count' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/spi/spi-loopback-test.c:762:17: warning: 'tx_count' may be used uninitialized in this function [-Wmaybe-uninitialized]

Adding an explicit initialization seems to be the only
workable solution here, to make the code behave correctly
and build without warning.

Fixes: 84e0c4e5e2 ("spi: add loopback test driver to allow for spi_master regression tests")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-15 18:13:53 +00:00
Dan Carpenter 8caad1da22 spi: loopback: fix typo in MODULE_PARM_DESC
There should be an 's' on "dump_message" so it matches the module_param.

Fixes: 84e0c4e5e2 ('spi: add loopback test driver to allow for spi_master regression tests')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-08 12:53:35 +00:00
Martin Sperl 1e8db97f0e spi: loopback-test: spi_check_rx_ranges can get always done
The spi_check_rx_ranges can always get executed independent of
if we have a real loopback situation.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-05 19:12:47 +00:00
Martin Sperl 339ec3ce54 spi: loopback-test: rename method spi_test_fill_tx to spi_test_fill_pattern
Rename method spi_test_fill_tx to spi_test_fill_pattern
to better describe what it does.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-05 19:05:23 +00:00
Martin Sperl e6520a3c88 spi: loopback-test: write rx pattern also when running without tx_buf
Currently the rx_buf does not get set with the
SPI_TEST_PATTERN_UNWRITTEN when tx_buf == NULL in the transfer.

Reorder code so that it gets done also under this specific condition.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-05 19:05:23 +00:00
Martin Sperl fc8773e195 spi: loopback: match configuration of test to description
The test "two tx+rx transfers - alter second" actually modifies
the first not the second transfer, which - in conjunction with
testing the read data - results also in overwriting data read
earlier.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-13 20:10:14 +00:00
Martin Sperl d58b9fda12 spi: loopback: fix printk format issues with size_t
Fixes the reported printk format issues reported by kbuild-test-robot.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-13 20:10:14 +00:00
Martin Sperl 84e0c4e5e2 spi: add loopback test driver to allow for spi_master regression tests
This driver is submitting lots of distinct spi-messages messages
with all kinds of alignments and length pattern.
Also distinct kinds of transfer pattern tests are implemented
(rx, tx, rx/tx, tx+tx, tx+rx,...)

Right now on a raspberry pi 752 distinct spi_messages are executed
in 13 different scenarios.

Configuration of additional test-pattern is easy, so that when
new bugs in drivers get detected the relevant transfer pattern can
also get added to the test framework, so that such situations are
detected in other drivers as well.

The idea behind this driver is to make it possible to also detect
regressions in spi_master implementations when changes occur.
Potentially these tests could get executed automatically in a
test-server-farm.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-12 23:05:18 +00:00