In cifs_unix_to_basic_fattr only update the cifs_fattr with an id if
it is valid after conversion.
Cc: Steve French <smfrench@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Use INVALID_UID and INVALID_GID instead of NO_CHANGE_64 to indicate
the value should not be changed.
In cifs_fill_unix_set_info convert from kuids and kgids into uids and
gids that will fit in FILE_UNIX_BASIC_INFO.
Cc: Steve French <smfrench@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Update id_mode_to_cifs_acl to take a kuid_t and a kgid_t.
Replace NO_CHANGE_32 with INVALID_UID and INVALID_GID, and tests for
NO_CHANGE_32 with uid_valid and gid_valid.
Carefully unpack the value returned from request_key. memcpy the
value into the expected type. The convert the uid/gid into a
kuid/kgid. And then only if the result is a valid kuid or kgid update
fuid/fgid.
Cc: Steve French <smfrench@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
keyring_alloc has been updated to take a kuid_t and kgid_t so
pass GLOBAL_ROOT_UID instead of 0 for the uid and GLOBAL_ROOT_GID
instead of 0 for the gid.
Cc: Steve French <smfrench@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The assumption that sizeof(uid_t) is the same as sizeof(gid_t) is
completely reasonable but since we can verify the condition at
compile time.
Cc: Steve French <smfrench@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The cifs protocol has a 64bit space for uids and gids, while linux
only supports a 32bit space today. Instead of silently truncating
64bit cifs ids, replace cifs ids that do not fit in the 32bit linux
id space with the default uid and gids for the cifs mount.
Cc: Steve French <smfrench@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Use uid_eq(uid, GLOBAL_ROOT_UID) instead of !uid.
Use gid_eq(gid, GLOBAL_ROOT_GID) instead of !gid.
Use uid_eq(uid, INVALID_UID) instead of uid == -1
Use gid_eq(uid, INVALID_GID) instead of gid == -1
Use uid = GLOBAL_ROOT_UID instead of uid = 0;
Use gid = GLOBAL_ROOT_GID instead of gid = 0;
Use !uid_eq(uid1, uid2) instead of uid1 != uid2.
Use !gid_eq(gid1, gid2) instead of gid1 != gid2.
Use uid_eq(uid1, uid2) instead of uid1 == uid2.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Change uid and gid in struct nfsd4_cb_sec to be of type kuid_t and
kgid_t.
In nfsd4_decode_cb_sec when reading uids and gids off the wire convert
them to kuids and kgids, and if they don't convert to valid kuids or
valid kuids ignore RPC_AUTH_UNIX and don't fill in any of the fields.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
In struct nfs4_ace remove the member who and replace it with an
anonymous union holding who_uid and who_gid. Allowing typesafe
storage uids and gids.
Add a helper pace_gt for sorting posix_acl_entries.
In struct posix_user_ace_state to replace uid with a union
of kuid_t uid and kgid_t gid.
Remove all initializations of the deprecated posic_acl_entry
e_id field. Which is not present when user namespaces are enabled.
Split find_uid into two functions find_uid and find_gid that work
in a typesafe manner.
In nfs4xdr update nfsd4_encode_fattr to deal with the changes
in struct nfs4_ace.
Rewrite nfsd4_encode_name to take a kuid_t and a kgid_t instead
of a generic id and flag if it is a group or a uid. Replace
the group flag with a test for a valid gid.
Modify nfsd4_encode_user to take a kuid_t and call the modifed
nfsd4_encode_name.
Modify nfsd4_encode_group to take a kgid_t and call the modified
nfsd4_encode_name.
Modify nfsd4_encode_aclname to take an ace instead of taking the
fields of an ace broken out. This allows it to detect if the ace is
for a user or a group and to pass the appropriate value while still
being typesafe.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
When reading uids and gids off the wire convert them to
kuids and kgids. If the conversion results in an invalid
result don't set the ATTR_UID or ATTR_GID.
When putting kuids and kgids onto the wire first convert
them to uids and gids the other side will understand.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
When reading uids and gids off the wire convert them to kuids and
kgids.
When putting kuids and kgids onto the wire first convert them to uids
and gids the other side will understand.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
These trivial macros that don't currently do anything are the last
vestiages of an old attempt at uid mapping that was removed from the
kernel in September of 2002. Remove them to make it clear what the
code is currently doing.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Convert nfsd_map_name_to_uid to return a kuid_t value.
Convert nfsd_map_name_to_gid to return a kgid_t value.
Convert nfsd_map_uid_to_name to take a kuid_t parameter.
Convert nfsd_map_gid_to_name to take a kgid_t paramater.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
u32 and uid_t have the same size and semantics so this change
should have no operational effect. This just removes the WTF
factor when looking at variables that hold both uids and gids
whos type is uid_t.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
- Use uid_eq and gid_eq when comparing kuids and kgids.
- Use make_kuid(&init_user_ns, -2) and make_kgid(&init_user_ns, -2) as
the initial uid and gid on nfs inodes, instead of using the typeunsafe
value of -2.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
When reading uids and gids off the wire convert them to
kuids and kgids.
When putting kuids and kgids onto the wire first convert
them to uids and gids the other side will understand.
When printing kuids and kgids convert them to values in
the initial user namespace then use normal printf formats.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
When reading uids and gids off the wire convert them to
kuids and kgids.
When putting kuids and kgids onto the wire first convert
them to uids and gids the other side will understand.
Add an additional failure mode incoming for uids or gids
that are invalid.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
When reading uids and gids off the wire convert them to
kuids and kgids.
When putting kuids and kgids onto the wire first convert
them to uids and gids the other side will understand.
Add an additional failure mode for incoming uid or
gids that are invalid.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Convert nfs_map_name_to_uid to return a kuid_t value.
Convert nfs_map_name_to_gid to return a kgid_t value.
Convert nfs_map_uid_to_name to take a kuid_t paramater.
Convert nfs_map_gid_to_name to take a kgid_t paramater.
Tweak nfs_fattr_map_owner_to_name to use a kuid_t intermediate value.
Tweak nfs_fattr_map_group_to_name to use a kgid_t intermediate value.
Which makes these functions properly handle kuids and kgids, including
erroring of the generated kuid or kgid is invalid.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
- Use kuid_t and kgit in struct nfsacl_encode_desc.
- Convert from kuids and kgids when generating on the wire values.
- Convert on the wire values to kuids and kgids when read.
- Modify cmp_acl_entry to be type safe comparison on posix acls.
Only acls with type ACL_USER and ACL_GROUP can appear more
than once and as such need to compare more than their tag.
- The e_id field is being removed from posix acls so don't initialize it.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
ncpfs does not natively support uids and gids so this conversion was
simply a matter of updating the the type of the mounteduid, the uid
and the gid on the superblock. Fixing the ioctls that read them,
updating the mount option parser and the mount option printer.
Cc: Petr Vandrovec <petr@vandrovec.name>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
When reading dinodes from the disk convert uids and gids
into kuids and kgids to store in vfs data structures.
When writing to dinodes to the disk convert kuids and kgids
in the in memory structures into plain uids and gids.
For now all on disk data structures are assumed to be
stored in the initial user namespace.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Where kuid_t values are compared use uid_eq and where kgid_t values
are compared use gid_eq. This is unfortunately necessary because
of the type safety that keeps someone from accidentally mixing
kuids and kgids with other types.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Remove the QUOTA_USER and QUOTA_GRUP defines. Remove
the last vestigal users of QUOTA_USER and QUOTA_GROUP.
Now that struct kqid is used throughout the gfs2 quota
code the need there is to use QUOTA_USER and QUOTA_GROUP
and the defines are just extraneous and confusing.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
- Change qd_id in struct gfs2_qutoa_data to struct kqid.
- Remove the now unnecessary QDF_USER bit field in qd_flags.
- Propopoage this change through the code generally making
things simpler along the way.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
- In quota_refresh_user_store convert the user supplied uid
into a kqid and pass it to gfs2_quota_refresh.
- In quota_refresh_group_store convert the user supplied gid
into a kqid and pass it to gfs2_quota_refresh.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Both qd_alloc and qd2offset perform the exact same computation
to get an index from a gfs2_quota_data. Make life a little
simpler and factor out this index computation.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
When a quota is queried return the uid or the gid in the mapped into
the caller's user namespace. In addition perform the munged version
of the mapping so that instead of -1 a value that does not map is
reported as the overflowuid or the overflowgid.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Split NO_QUOTA_CHANGE into NO_UID_QUTOA_CHANGE and NO_GID_QUTOA_CHANGE
so the constants may be well typed.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
In set_dqblk it is an error to look at fdq->d_id or fdq->d_flags.
Userspace quota applications do not set these fields when calling
quotactl(Q_XSETQLIM,...), and the kernel does not set those fields
when quota_setquota calls set_dqblk.
gfs2 never looks at fdq->d_id or fdq->d_flags after checking
to see if they match the id and type supplied to set_dqblk.
No other linux filesystem in set_dqblk looks at either fdq->d_id
or fdq->d_flags.
Therefore remove these bogus checks from gfs2 and allow normal
quota setting applications to work.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Convert between uid and gids stored in the on the wire format of dlm
locks aka struct ocfs2_meta_lvb and kuids and kgids stored in
inode->i_uid and inode->i_gid.
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Explicitly deal with the different kinds of acls because they need
different conversions.
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
- Change c_uid in struct coda_indoe_info from a vuid_t to a kuid_t.
- Initialize c_uid to GLOBAL_ROOT_UID instead of 0.
- Use uid_eq to compare cached kuids.
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Remove the slight chance that uids and gids in coda messages will be
interpreted in the wrong user namespace.
- Only allow processes in the initial user namespace to open the coda
character device to communicate with coda filesystems.
- Explicitly convert the uids in the coda header into the initial user
namespace.
- In coda_vattr_to_attr make kuids and kgids from the initial user
namespace uids and gids in struct coda_vattr that just came from
userspace.
- In coda_iattr_to_vattr convert kuids and kgids into uids and gids
in the intial user namespace and store them in struct coda_vattr for
sending to coda userspace programs.
Nothing needs to be changed with mounts as coda does not support
being mounted in anything other than the initial user namespace.
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Remove the slight chance that pids in coda messages will be
interpreted in the wrong pid namespace.
- Explicitly send all pids in coda messages in the initial pid
namespace.
- Only allow mounts from processes in the initial pid namespace.
- Only allow processes in the initial pid namespace to open the coda
character device to communicate with coda.
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Modify struct afs_file_status to store owner as a kuid_t and group as
a kgid_t.
In xdr_decode_AFSFetchStatus as owner is now a kuid_t and group is now
a kgid_t don't use the EXTRACT macro. Instead perform the work of
the extract macro explicitly. Read the value with ntohl and
convert it to the appropriate type with make_kuid or make_kgid.
Test if the value is different from what is stored in status and
update changed. Update the value in status.
In xdr_encode_AFS_StoreStatus call from_kuid or from_kgid as
we are computing the on the wire encoding.
Initialize uids with GLOBAL_ROOT_UID instead of 0.
Initialize gids with GLOBAL_ROOT_GID instead of 0.
Cc: David Howells <dhowells@redhat.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
rxrpc sockets only work in the initial network namespace so it isn't
possible to support afs in any other network namespace.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
While looking for kuid_t and kgid_t conversions I found this
structure that has never been used since it was added to the
kernel in 2007. The obvious for this structure to be used
is in xdr_encode_AFS_StoreStatus and that function uses a
small handful of local variables instead.
So remove the unnecessary structure to prevent confusion.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Eric W. Biederman