Commit Graph

16258 Commits

Author SHA1 Message Date
Linus Torvalds
8a5f06056a Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for x86:

   - Fix the swapped outb() parameters in the KASLR code

   - Fix the PKEY handling at fork which missed to preserve the pkey
     state for the child. Comes with a test case to validate that.

   - Fix the entry stack handling for XEN PV to respect that XEN PV
     systems enter the function already on the current thread stack and
     not on the trampoline.

   - Fix kexec load failure caused by using a stale value when the
     kexec_buf structure is reused for subsequent allocations.

   - Fix a bogus sizeof() in the memory encryption code

   - Enforce PCI dependency for the Intel Low Power Subsystem

   - Enforce PCI_LOCKLESS_CONFIG when PCI is enabled"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/Kconfig: Select PCI_LOCKLESS_CONFIG if PCI is enabled
  x86/entry/64/compat: Fix stack switching for XEN PV
  x86/kexec: Fix a kexec_file_load() failure
  x86/mm/mem_encrypt: Fix erroneous sizeof()
  x86/selftests/pkeys: Fork() to check for state being preserved
  x86/pkeys: Properly copy pkey state at fork()
  x86/kaslr: Fix incorrect i8254 outb() parameters
  x86/intel/lpss: Make PCI dependency explicit
2019-01-27 12:02:00 -08:00
Linus Torvalds
1fc7f56db7 Quite a few fixes for x86: nested virtualization save/restore, AMD nested virtualization
and virtual APIC, 32-bit fixes, an important fix to restore operation on older
 processors, and a bunch of hyper-v bugfixes.  Several are marked stable.
 
 There are also fixes for GCC warnings and for a GCC/objtool interaction.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJcTBqRAAoJEL/70l94x66DF8wH/0LKWQd4ay54OgpfdPRcUqXa
 yW10qqnO5OZfpI19UU2rfv2QXrdSOnDafgN6xiQ2Dz7m3JsZB7gBDsCCYKzeUgCz
 YB0UVcX1ZS+gr3igDDHIw3lWPBUqDIzKmEJO++9nAbDi4gOmWaPQ8vWrfORWAZcl
 yx2nCjeljjbO65UdRTdr3TkUNbpFlJ2NEUrzzco8OgChNB9QoxLTSJHrZxeZ7dNn
 J/ZDAaBwRxXN/aKH0A3+pwUFrP5nGuronT6nGo1048WWrlQzdMp7qh8fPtTBvWJ4
 uqUrrYc7jY/EhfZ4k/aAUGkAdt4IZI1KyHjhqtmB9zf+hezphUJv66QYQGVTFts=
 =yUth
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:
 "Quite a few fixes for x86: nested virtualization save/restore, AMD
  nested virtualization and virtual APIC, 32-bit fixes, an important fix
  to restore operation on older processors, and a bunch of hyper-v
  bugfixes. Several are marked stable.

  There are also fixes for GCC warnings and for a GCC/objtool interaction"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Mark expected switch fall-throughs
  KVM: x86: fix TRACE_INCLUDE_PATH and remove -I. header search paths
  KVM: selftests: check returned evmcs version range
  x86/kvm/hyper-v: nested_enable_evmcs() sets vmcs_version incorrectly
  KVM: VMX: Move vmx_vcpu_run()'s VM-Enter asm blob to a helper function
  kvm: selftests: Fix region overlap check in kvm_util
  kvm: vmx: fix some -Wmissing-prototypes warnings
  KVM: nSVM: clear events pending from svm_complete_interrupts() when exiting to L1
  svm: Fix AVIC incomplete IPI emulation
  svm: Add warning message for AVIC IPI invalid target
  KVM: x86: WARN_ONCE if sending a PV IPI returns a fatal error
  KVM: x86: Fix PV IPIs for 32-bit KVM host
  x86/kvm/hyper-v: recommend using eVMCS only when it is enabled
  x86/kvm/hyper-v: don't recommend doing reset via synthetic MSR
  kvm: x86/vmx: Use kzalloc for cached_vmcs12
  KVM: VMX: Use the correct field var when clearing VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL
  KVM: x86: Fix single-step debugging
  x86/kvm/hyper-v: don't announce GUEST IDLE MSR support
2019-01-27 09:21:00 -08:00
Linus Torvalds
6a2651b55b libnvdimm v5.0-rc4
* Fix support for NVDIMMs that implement the ACPI standard label
   methods.
 * Fix error handling for security overwrite (memory leak / userspace
   hang condition), and another one-line security cleanup
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcTOoMAAoJEB7SkWpmfYgCVxAP/0YiOcsf6gtloMIfKLZr7Y0N
 R/8gH6ChWqv+aXQJ7UOA7MDkSSzL5y9SXRFy8a7lO7jb/V4OiNpqEejB4++J9AZO
 n55V1J6nGrPo6qk7r1nm7KL6s2PX38UKJE2lc73D/geyVhAunhfCkDRUVNVFSpbo
 zwNrWb25NxnB5wgBzvg1nsmMOVp0yPGe+D+4UeIZKzXN6bkupAk0cgBIl3JComDy
 aad/id0loClhD6Wu7OJFRutC/eMokRNveEQUSK6fZrRqgJeonkjRetehGGzfdOtO
 W/YqlvwRe3fpuCAmJQfdMZba+h9WDmpwL1KA5txWJmA2oy4IF28xyhRoOAzkcx2/
 WAYv/Zad47Lr39t2zcupvqMj9DgxObBDmTbpkuGsYnvKGp6qEFfO7EEmoan8JuMN
 QURgCIWTwdDTqinETHi6OXgZLwOTyDV0COQV+YD6Jop8gh0UZNayLQGn79P2FJDm
 rF304QfzKrPcnGRfbJf3WTeofOHcfHp0Q0E6oyHvzhgxWy3gIDJo30+J0oLgk7cR
 5WZnlg1k6ySrrOzqAvdm/xKMX4lQ/OlZ2uswFenPBPO7OKzQ3cBCY2WCfUuLH9Xx
 RlK7t5O2MBwx8VtUDCbN/+AIlDRbPjS+r6NiJcHXFgnrMI9EDJqIFLZI500b5hkj
 np5nqzdEs4Akd7YANvKj
 =E4Rz
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-fixes-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fixes from Dan Williams:
 "A fix for namespace label support for non-Intel NVDIMMs that implement
  the ACPI standard label method.

  This has apparently never worked and could wait for v5.1. However it
  has enough visibility with hardware vendors [1] and distro bug
  trackers [2], and low enough risk that I decided it should go in for
  -rc4. The other fixups target the new, for v5.0, nvdimm security
  functionality. The larger init path fixup closes a memory leak and a
  potential userspace lockup due to missed notifications.

    [1] https://github.com/pmem/ndctl/issues/78
    [2] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1811785

  These have all soaked in -next for a week with no reported issues.

  Summary:

   - Fix support for NVDIMMs that implement the ACPI standard label
     methods.

   - Fix error handling for security overwrite (memory leak / userspace
     hang condition), and another one-line security cleanup"

* tag 'libnvdimm-fixes-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  acpi/nfit: Fix command-supported detection
  acpi/nfit: Block function zero DSMs
  libnvdimm/security: Require nvdimm_security_setup_events() to succeed
  nfit_test: fix security state pull for nvdimm security nfit_test
2019-01-27 09:11:51 -08:00
Vitaly Kuznetsov
35b531a1e7 KVM: selftests: check returned evmcs version range
Check that KVM_CAP_HYPERV_ENLIGHTENED_VMCS returns correct version range.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-25 19:11:38 +01:00
Ben Gardon
94a980c39c kvm: selftests: Fix region overlap check in kvm_util
Fix a call to userspace_mem_region_find to conform to its spec of
taking an inclusive, inclusive range. It was previously being called
with an inclusive, exclusive range. Also remove a redundant region bounds
check in vm_userspace_mem_region_add. Region overlap checking is already
performed by the call to userspace_mem_region_find.

Tested: Compiled tools/testing/selftests/kvm with -static
	Ran all resulting test binaries on an Intel Haswell test machine
	All tests passed

Signed-off-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-25 19:11:36 +01:00
Linus Torvalds
8f45fa2724 linux-kselftest-5.0-rc4
This Kselftest update for Linux 5.0-rc4 consists of fixes to rtc, seccomp
 and other tests.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAlxHTz0ACgkQCwJExA0N
 Qxzt9hAAutAJagSuFROtzJN//x7oGQl5v1DnbLERI388vK4a+vL3bEsHh7QRlUbe
 x3mu6PZCQ/kFl5f7mrICuBPRWxSJA4rDVGeLWJlKUKqoB/rW/W1bvCBVPXCO2XMc
 FLxAXDd/bL/NsDOBJUjkk1mHYcfmB8dqPlLZM/ArbZbQLRBKXocTP7VclNtrZmgJ
 vIB3WU+JfgW4Bx8DlkZbiWohe+vazfDYbBoYMmh4OrCwuxOZL0T6cAd3qddCoP/N
 SOpryfCMHN8TX5f3L+BFqkF2vk7EbKRGxVW1bOJ9SXIN1/XCKTp9/VqVrryJ4Dx2
 Hf6YNnoRGGphFErJ+9IRF3qLWxObkHYRWwKL4ZEqkB7VxIHNqpfYO9t5H8lhzFoy
 rhSQM0a9UNoCplKfzsLx5uRGC+/dPPVDCashF6grpqws3nDBIYwTdN3bdtYBkhjL
 V1AYslysX+frxzTtPdRvJI2w8Y7BUjRBjuFkXJxTsfPzyPa/oyIx8QEP1yifTJu4
 4ijfsZbmSoCynCK9ckw7DL2IOLHUrVbr2jldPsbPROo+Vy0nDhILbvbm+bYQXchM
 OmBRnX9NbWLrnI3ZeF4tuKbz1R4Ax/Z1qRWzZoKo9V469l5wSTkYHkZFPcmwNWyo
 vvSSJ0YmtKkLclrT4/GYvL2qVYXAGFy2HV44Ag5S3b+KehkIZFI=
 =xk1L
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "Fixes to rtc, seccomp and other tests"

* tag 'linux-kselftest-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/seccomp: Abort without user notification support
  selftests: gpio-mockup-chardev: Check asprintf() for error
  selftests: seccomp: use LDLIBS instead of LDFLAGS
  selftests/vm/gup_benchmark.c: match gup struct to kernel
  tools/testing/selftests/x86/unwind_vdso.c: Remove duplicate header
  x86/mpx/selftests: fix spelling mistake "succeded" -> "succeeded"
  selftests: rtc: rtctest: add alarm test on minute boundary
  selftests: rtc: rtctest: fix alarm tests
2019-01-23 14:02:14 +13:00
Dave Jiang
266c7bf52a nfit_test: fix security state pull for nvdimm security nfit_test
The override status function needs to be updated to use the proper
request parameter in order to get the security state.

Fixes: 3c13e2ac74 ("...Add test support for Intel nvdimm security DSMs")
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-01-21 09:56:29 -08:00
Linus Torvalds
7d0ae236ed Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Fix endless loop in nf_tables, from Phil Sutter.

 2) Fix cross namespace ip6_gre tunnel hash list corruption, from
    Olivier Matz.

 3) Don't be too strict in phy_start_aneg() otherwise we might not allow
    restarting auto negotiation. From Heiner Kallweit.

 4) Fix various KMSAN uninitialized value cases in tipc, from Ying Xue.

 5) Memory leak in act_tunnel_key, from Davide Caratti.

 6) Handle chip errata of mv88e6390 PHY, from Andrew Lunn.

 7) Remove linear SKB assumption in fou/fou6, from Eric Dumazet.

 8) Missing udplite rehash callbacks, from Alexey Kodanev.

 9) Log dirty pages properly in vhost, from Jason Wang.

10) Use consume_skb() in neigh_probe() as this is a normal free not a
    drop, from Yang Wei. Likewise in macvlan_process_broadcast().

11) Missing device_del() in mdiobus_register() error paths, from Thomas
    Petazzoni.

12) Fix checksum handling of short packets in mlx5, from Cong Wang.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (96 commits)
  bpf: in __bpf_redirect_no_mac pull mac only if present
  virtio_net: bulk free tx skbs
  net: phy: phy driver features are mandatory
  isdn: avm: Fix string plus integer warning from Clang
  net/mlx5e: Fix cb_ident duplicate in indirect block register
  net/mlx5e: Fix wrong (zero) TX drop counter indication for representor
  net/mlx5e: Fix wrong error code return on FEC query failure
  net/mlx5e: Force CHECKSUM_UNNECESSARY for short ethernet frames
  tools: bpftool: Cleanup license mess
  bpf: fix inner map masking to prevent oob under speculation
  bpf: pull in pkt_sched.h header for tooling to fix bpftool build
  selftests: forwarding: Add a test case for externally learned FDB entries
  selftests: mlxsw: Test FDB offload indication
  mlxsw: spectrum_switchdev: Do not treat static FDB entries as sticky
  net: bridge: Mark FDB entries that were added by user as such
  mlxsw: spectrum_fid: Update dummy FID index
  mlxsw: pci: Return error on PCI reset timeout
  mlxsw: pci: Increase PCI SW reset timeout
  mlxsw: pci: Ring CQ's doorbell before RDQ's
  MAINTAINERS: update email addresses of liquidio driver maintainers
  ...
2019-01-21 12:52:31 +13:00
David S. Miller
6436408e81 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2019-01-20

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix a out-of-bounds access in __bpf_redirect_no_mac, from Willem.

2) Fix bpf_setsockopt to reset sock dst on SO_MARK changes, from Peter.

3) Fix map in map masking to prevent out-of-bounds access under
   speculative execution, from Daniel.

4) Fix bpf_setsockopt's SO_MAX_PACING_RATE to support TCP internal
   pacing, from Yuchung.

5) Fix json writer license in bpftool, from Thomas.

6) Fix AF_XDP to check if an actually queue exists during umem
   setup, from Krzysztof.

7) Several fixes to BPF stackmap's build id handling. Another fix
   for bpftool build to account for libbfd variations wrt linking
   requirements, from Stanislav.

8) Fix BPF samples build with clang by working around missing asm
   goto, from Yonghong.

9) Fix libbpf to retry program load on signal interrupt, from Lorenz.

10) Various minor compile warning fixes in BPF code, from Mathieu.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19 16:38:12 -08:00
Thomas Gleixner
64cf548126 tools: bpftool: Cleanup license mess
Precise and non-ambiguous license information is important. The recent
relicensing of the bpftools introduced a license conflict.

The files have now:

     SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause

and

     * This program is free software; you can redistribute it and/or
     * modify it under the terms of the GNU General Public License
     * as published by the Free Software Foundation; either version
     * 2 of the License, or (at your option) any later version

Amazingly about 20 people acked that change and neither they nor the
committer noticed. Oh well.

Digging deeper: The files were imported from the iproute2 repository with
the GPL V2 or later boiler plate text in commit b66e907cfe ("tools:
bpftool: copy JSON writer from iproute2 repository")

Looking at the iproute2 repository at

  git://git.kernel.org/pub/scm/network/iproute2/iproute2.git

the following commit is the equivivalent:

  commit d9d8c839 ("json_writer: add SPDX Identifier (GPL-2/BSD-2)")

That commit explicitly removes the boiler plate and relicenses the code
uner GPL-2.0-only and BSD-2-Clause. As Steven wrote the original code and
also the relicensing commit, it's assumed that the relicensing was intended
to do exaclty that. Just the kernel side update failed to remove the boiler
plate. Do so now.

Fixes: 907b223651 ("tools: bpftool: dual license all files")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Sean Young <sean@mess.org>
Cc: Jiri Benc <jbenc@redhat.com>
Cc: David Calavera <david.calavera@gmail.com>
Cc: Andrey Ignatov <rdna@fb.com>
Cc: Joe Stringer <joe@wand.net.nz>
Cc: David Ahern <dsahern@gmail.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Petar Penkov <ppenkov@stanford.edu>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
CC: okash.khawaja@gmail.com
Cc: netdev@vger.kernel.org
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-18 15:26:54 -08:00
Daniel Borkmann
ad6dd7a9c4 bpf: pull in pkt_sched.h header for tooling to fix bpftool build
Dan reported that bpftool does not compile for him:

  $ make tools/bpf
    DESCEND  bpf

  Auto-detecting system features:
  ..                        libbfd: [ on  ]
  ..        disassembler-four-args: [ OFF ]

    DESCEND  bpftool

  Auto-detecting system features:
  ..                        libbfd: [ on  ]
  ..        disassembler-four-args: [ OFF ]

    CC       /opt/linux.git/tools/bpf/bpftool/net.o
  In file included from /opt/linux.git/tools/include/uapi/linux/pkt_cls.h:6:0,
                 from /opt/linux.git/tools/include/uapi/linux/tc_act/tc_bpf.h:14,
                 from net.c:13:
  net.c: In function 'show_dev_tc_bpf':
  net.c:164:21: error: 'TC_H_CLSACT' undeclared (first use in this function)
    handle = TC_H_MAKE(TC_H_CLSACT, TC_H_MIN_INGRESS);
  [...]

Fix it by importing pkt_sched.h header copy into tooling
infrastructure.

Fixes: 49a249c387 ("tools/bpftool: copy a few net uapi headers to tools directory")
Fixes: f6f3bac08f ("tools/bpf: bpftool: add net support")
Reported-by: Dan Gilson <dan_gilson@yahoo.com>
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=202315
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-18 15:16:36 -08:00
Ido Schimmel
479a2b761d selftests: forwarding: Add a test case for externally learned FDB entries
Test that externally learned FDB entries can roam, but not age out.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18 15:12:16 -08:00
Ido Schimmel
72159272fc selftests: mlxsw: Test FDB offload indication
Test that externally learned FDB entries added from user space are
marked as offloaded.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18 15:12:16 -08:00
Linus Torvalds
c5b709804e powerpc fixes for 5.0 #3
A couple of weeks of fixes.
 
 There's one fix for an oops on Power9 machines with Open CAPI adapters.
 
 And a fix for probable memory corruption in some of the new NPU code, caught by
 smatch though and not seen in the wild.
 
 Plus a few other minor fixes.
 
 There's one non-fix which is the perf_regs change. That was sent during the
 merge window but I accidentally only merged the first of two patches in the
 series. It's been in linux-next so hopefully doesn't conflict with anything in
 acme's tree.
 
 Thanks to:
  Alexey Kardashevskiy, Andrew Donnellan, Breno Leitao, Christian Lamparter,
  Christophe Leroy, Dan Carpenter, Frederic Barrat, Greg Kurz, Jason A.
  Donenfeld, Madhavan Srinivasan.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcQcioAAoJEFHr6jzI4aWAMxoP/j2w/p1z5As/rMQRH9L0wTDV
 Z/69GkRnj+rkRSNBWJ2T/0KY6c1mXPH4R2nvmFNfdEYzXWLh+Ymn65RQ3ifQnb56
 C5PPjVOPruiCjKAWiNYGr8S+Ev8IehZU0zXXToCwV1MKCMU0QcO6Q1HtEVI56WhV
 xtQfBJz1tkPJ4Ep9HZ7go7p6SKaFmmWh/Z8pg02s5DOlGN4bKFQ3Qc+XnNPw5vc8
 LgjrwrOIQ7D+lXa6saQWbV16ktLzzpsxDfxXHXNTz0bOjyuQAXfdnfGJnEoDowYa
 Pqio5fm1rcjXcHtqwuSsRWeYi+dzO+AYj0WUrqevcPSAMM0RwmqREcfBGLvAlPWA
 fYfuMMB5zhf9HkDHkx4+8pvZ6io+VDP5k5YF7ZnQfz8tVYAboTmRvIiGAM8ks8hC
 6DnNdV2WojBeoK2gWsgX+WAIc4Ynk+u0554kf884rtiK7TSCRq63JNTeTmIr8v/u
 7g5qwlC99RDYsl/ZkY2eQviiQo6dWXTwRCZ9lbk/iLivc90ulN7P+8r3oaQNV6ja
 zYpiLz95fpL7g5G0caW3AZTzfnJxOGioaCGOQc/hZHzhdc7p9zWH+7sd9mPMGayu
 iTMn66h2v8cf6o6u2peAf15NQvR0jHe8mIccUpRJTXWwnlVMI2WAcXqlpE+9fj5V
 gBZ0MuitQtX0qLEtFpUa
 =hlZ7
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "A couple of weeks of fixes.

  There's one fix for an oops on Power9 machines with Open CAPI
  adapters.

  And a fix for probable memory corruption in some of the new NPU code,
  caught by smatch though and not seen in the wild.

  Plus a few other minor fixes.

  There's one non-fix which is the perf_regs change. That was sent
  during the merge window but I accidentally only merged the first of
  two patches in the series. It's been in linux-next so hopefully
  doesn't conflict with anything in acme's tree.

  Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Breno Leitao,
  Christian Lamparter, Christophe Leroy, Dan Carpenter, Frederic Barrat,
  Greg Kurz, Jason A. Donenfeld, Madhavan Srinivasan"

* tag 'powerpc-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/syscalls: Fix syscall tracing
  powerpc/pseries: Fix build break due to pnv_npu2_init()
  powerpc/4xx/ocm: Fix fix for phys_addr_t printf warnings
  powerpc/powernv/npu: Fix oops in pnv_try_setup_npu_table_group()
  powerpc/tm: Limit TM code inside PPC_TRANSACTIONAL_MEM
  powerpc/8xx: fix setting of pagetable for Abatron BDI debug tool.
  powerpc/powernv/npu: Allocate enough memory in pnv_try_setup_npu_table_group()
  powerpc/perf: Update perf_regs structure to include MMCRA
2019-01-19 05:55:42 +12:00
Kees Cook
3d244c192a selftests/seccomp: Abort without user notification support
In the face of missing user notification support, the self test needs
to stop executing a test (ASSERT_*) instead of just reporting and
continuing (EXPECT_*). This adjusts the user notification tests to do
that where needed.

Reported-by: Shuah Khan <shuah@kernel.org>
Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Tested-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-01-17 11:00:23 -07:00
Stanislav Fomichev
f67ad87ab3 selftests/bpf: retry tests that expect build-id
While running test_progs in a loop I found out that I'm sometimes hitting
"Didn't find expected build ID from the map" error.

Looking at stack_map_get_build_id_offset() it seems that it is racy (by
design) and can sometimes return BPF_STACK_BUILD_ID_IP (i.e. can't trylock
current->mm->mmap_sem).

Let's retry this test a single time.

Fixes: 13790d1cc7 ("bpf: add selftest for stackmap with build_id in NMI context")
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-17 16:43:18 +01:00
Davide Caratti
91fa038d94 selftests: tc-testing: fix parsing of ife type
In iproute2 commit 90c5c969f0b9 ("fix print_0xhex on 32 bit"), the format
specifier for the ife type changed from 0x%X to %#llX, causing systematic
failures in the following TDC test cases:

 7682 - Create valid ife encode action with mark and pass control
 ef47 - Create valid ife encode action with mark and pipe control
 df43 - Create valid ife encode action with mark and continue control
 e4cf - Create valid ife encode action with mark and drop control
 ccba - Create valid ife encode action with mark and reclassify control
 a1cf - Create valid ife encode action with mark and jump control
 cb3d - Create valid ife encode action with mark value at 32-bit maximum
 95ed - Create valid ife encode action with prio and pass control
 aa17 - Create valid ife encode action with prio and pipe control
 74c7 - Create valid ife encode action with prio and continue control
 7a97 - Create valid ife encode action with prio and drop control
 f66b - Create valid ife encode action with prio and reclassify control
 3056 - Create valid ife encode action with prio and jump control
 7dd3 - Create valid ife encode action with prio value at 32-bit maximum
 05bb - Create valid ife encode action with tcindex and pass control
 ce65 - Create valid ife encode action with tcindex and pipe control
 09cd - Create valid ife encode action with tcindex and continue control
 8eb5 - Create valid ife encode action with tcindex and continue control
 451a - Create valid ife encode action with tcindex and drop control
 d76c - Create valid ife encode action with tcindex and reclassify control
 e731 - Create valid ife encode action with tcindex and jump control
 b7b8 - Create valid ife encode action with tcindex value at 16-bit maximum
 2a9c - Create valid ife encode action with mac src parameter
 cf5c - Create valid ife encode action with mac dst parameter
 2353 - Create valid ife encode action with mac src and mac dst parameters
 552c - Create valid ife encode action with mark and type parameters
 0421 - Create valid ife encode action with prio and type parameters
 4017 - Create valid ife encode action with tcindex and type parameters
 fac3 - Create valid ife encode action with index at 32-bit maximnum
 7c25 - Create valid ife decode action with pass control
 dccb - Create valid ife decode action with pipe control
 7bb9 - Create valid ife decode action with continue control
 d9ad - Create valid ife decode action with drop control
 219f - Create valid ife decode action with reclassify control
 8f44 - Create valid ife decode action with jump control
 b330 - Create ife encode action with cookie

Change 'matchPattern' values, allowing '0' and '0x0' if ife type is equal
to 0, and accepting both '0x' and '0X' otherwise, to let these tests pass
both with old and new tc binaries.
While at it, fix a small typo in test case fac3 ('maximnum'->'maximum').

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-16 14:05:42 -08:00
Geert Uytterhoeven
508cacd7da selftests: gpio-mockup-chardev: Check asprintf() for error
With gcc 7.3.0:

    gpio-mockup-chardev.c: In function ‘get_debugfs’:
    gpio-mockup-chardev.c:62:3: warning: ignoring return value of ‘asprintf’, declared with attribute warn_unused_result [-Wunused-result]
       asprintf(path, "%s/gpio", mnt_fs_get_target(fs));
       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Handle asprintf() failures to fix this.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-01-16 15:02:57 -07:00
Fathi Boudra
5bbc73a841 selftests: seccomp: use LDLIBS instead of LDFLAGS
seccomp_bpf fails to build due to undefined reference errors:

 aarch64-linaro-linux-gcc --sysroot=/build/tmp-rpb-glibc/sysroots/hikey
 -O2 -pipe -g -feliminate-unused-debug-types -Wl,-no-as-needed -Wall
 -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -lpthread seccomp_bpf.c -o
 /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf
 /tmp/ccrlR3MW.o: In function `tsync_sibling':
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1920: undefined reference to `sem_post'
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1920: undefined reference to `sem_post'
 /tmp/ccrlR3MW.o: In function `TSYNC_setup':
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1863: undefined reference to `sem_init'
 /tmp/ccrlR3MW.o: In function `TSYNC_teardown':
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1904: undefined reference to `sem_destroy'
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1897: undefined reference to `pthread_kill'
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1898: undefined reference to `pthread_cancel'
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1899: undefined reference to `pthread_join'
 /tmp/ccrlR3MW.o: In function `tsync_start_sibling':
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
 /tmp/ccrlR3MW.o: In function `TSYNC_siblings_fail_prctl':
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1978: undefined reference to `sem_wait'
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1990: undefined reference to `pthread_join'
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1992: undefined reference to `pthread_join'
 /tmp/ccrlR3MW.o: In function `tsync_start_sibling':
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
 /tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_with_ancestor':
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2016: undefined reference to `sem_wait'
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2032: undefined reference to `pthread_join'
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2034: undefined reference to `pthread_join'
 /tmp/ccrlR3MW.o: In function `tsync_start_sibling':
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
 /tmp/ccrlR3MW.o: In function `TSYNC_two_sibling_want_nnp':
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2046: undefined reference to `sem_wait'
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2058: undefined reference to `pthread_join'
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2060: undefined reference to `pthread_join'
 /tmp/ccrlR3MW.o: In function `tsync_start_sibling':
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
 /tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_with_no_filter':
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2073: undefined reference to `sem_wait'
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2098: undefined reference to `pthread_join'
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2100: undefined reference to `pthread_join'
 /tmp/ccrlR3MW.o: In function `tsync_start_sibling':
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
 /tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_with_one_divergence':
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2125: undefined reference to `sem_wait'
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2143: undefined reference to `pthread_join'
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2145: undefined reference to `pthread_join'
 /tmp/ccrlR3MW.o: In function `tsync_start_sibling':
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
 /tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_not_under_filter':
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2169: undefined reference to `sem_wait'
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2202: undefined reference to `pthread_join'
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2227: undefined reference to `pthread_join'
 /tmp/ccrlR3MW.o: In function `tsync_start_sibling':
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'

It's GNU Make and linker specific.

The default Makefile rule looks like:

$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)

When linking is done by gcc itself, no issue, but when it needs to be passed
to proper ld, only LDLIBS follows and then ld cannot know what libs to link
with.

More detail:
https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html

LDFLAGS
Extra flags to give to compilers when they are supposed to invoke the linker,
‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable
instead.

LDLIBS
Library flags or names given to compilers when they are supposed to invoke the
linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to
LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS
variable.

https://lkml.org/lkml/2010/2/10/362

tools/perf: libraries must come after objects

Link order matters, use LDLIBS instead of LDFLAGS to properly link against
libpthread.

Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-01-16 11:41:44 -07:00
Davide Caratti
5216bd7779 selftests: tc-testing: fix tunnel_key failure if dst_port is unspecified
After commit 1c25324caf ("net/sched: act_tunnel_key: Don't dump dst port
if it wasn't set"), act_tunnel_key doesn't dump anymore the destination
port, unless it was explicitly configured. This caused systematic failures
in the following TDC test case:

 7a88 - Add tunnel_key action with cookie parameter

Avoid matching zero values of TCA_TUNNEL_KEY_ENC_DST_PORT to let the test
pass again.

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-15 21:58:17 -08:00
Davide Caratti
e413615502 selftests: tc-testing: drop test on missing tunnel key id
After merge of commit 80ef0f22ce ("net/sched: act_tunnel_key: Allow
key-less tunnels"), act_tunnel_key does not reject anymore requests to
install 'set' rules where the key id is missing. Therefore, drop the
following TDC testcase:

 ba4e - Add tunnel_key set action with missing mandatory id parameter

because it's going to become a systematic fail as soon as userspace
iproute2 will start supporting key-less tunnels.

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-15 21:55:50 -08:00
Stanislav Fomichev
6e8ccb4f62 tools/bpf: properly account for libbfd variations
On some platforms, in order to link against libbfd, we need to
link against liberty and even possibly libz. Account for that
in the bpftool Makefile. We now have proper feature detection
for each case, so handle each one separately.

See recent commit 14541b1e7e ("perf build: Don't unconditionally link the
libbfd feature test to -liberty and -lz") where I fixed feature
detection.

v2 (addressed Jakub's nits):
  * better syntax for 'else ifeq'
  * no space between ifeq args
v3:
  * use LIBS, not EXTLIBS for -DHAVE_LIBBFD_SUPPORT

Fixes: 29a9c10e41 ("bpftool: make libbfd optional")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-16 00:53:48 +01:00
Dan Carpenter
5be99560c6 selftests/txtimestamp: Fix an equals vs assign bug
This should be == instead of =.

Fixes: b52354aa06 ("selftests: expand txtimestamp with ipv6 dgram + raw and pf_packet")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-15 13:33:44 -08:00
Alison Schofield
91cd63d320 selftests/vm/gup_benchmark.c: match gup struct to kernel
An expansion field was added to the kernel copy of this structure for
future use. See mm/gup_benchmark.c.

Add the same expansion field here, so that the IOCTL command decodes
correctly. Otherwise, it fails with EINVAL.

Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-01-15 13:48:24 -07:00
Lorenz Bauer
86edaed379 bpf: libbpf: retry loading program on EAGAIN
Commit c3494801cd ("bpf: check pending signals while
verifying programs") makes it possible for the BPF_PROG_LOAD
to fail with EAGAIN. Retry unconditionally in this case.

Fixes: c3494801cd ("bpf: check pending signals while verifying programs")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-15 21:35:34 +01:00
Stanislav Fomichev
1be72f29bf selftests/bpf: install with_tunnels.sh for test_flow_dissector.sh
test_flow_dissector.sh depends on both with_addr.sh and with_tunnels.sh
However, we install only with_addr.sh.

Add with_tunnels.sh to TEST_PROGS_EXTENDED to make sure it gets
installed as well.

Tested with: make TARGETS=bpf install INSTALL_PATH=$PWD/x

Fixes: ef4ab8447a ("selftests: bpf: install script with_addr.sh")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-15 20:53:30 +01:00
Linus Torvalds
e8746440bf Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Fix regression in multi-SKB responses to RTM_GETADDR, from Arthur
    Gautier.

 2) Fix ipv6 frag parsing in openvswitch, from Yi-Hung Wei.

 3) Unbounded recursion in ipv4 and ipv6 GUE tunnels, from Stefano
    Brivio.

 4) Use after free in hns driver, from Yonglong Liu.

 5) icmp6_send() needs to handle the case of NULL skb, from Eric
    Dumazet.

 6) Missing rcu read lock in __inet6_bind() when operating on mapped
    addresses, from David Ahern.

 7) Memory leak in tipc-nl_compat_publ_dump(), from Gustavo A. R. Silva.

 8) Fix PHY vs r8169 module loading ordering issues, from Heiner
    Kallweit.

 9) Fix bridge vlan memory leak, from Ido Schimmel.

10) Dev refcount leak in AF_PACKET, from Jason Gunthorpe.

11) Infoleak in ipv6_local_error(), flow label isn't completely
    initialized. From Eric Dumazet.

12) Handle mv88e6390 errata, from Andrew Lunn.

13) Making vhost/vsock CID hashing consistent, from Zha Bin.

14) Fix lack of UMH cleanup when it unexpectedly exits, from Taehee Yoo.

15) Bridge forwarding must clear skb->tstamp, from Paolo Abeni.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits)
  bnxt_en: Fix context memory allocation.
  bnxt_en: Fix ring checking logic on 57500 chips.
  mISDN: hfcsusb: Use struct_size() in kzalloc()
  net: clear skb->tstamp in bridge forwarding path
  net: bpfilter: disallow to remove bpfilter module while being used
  net: bpfilter: restart bpfilter_umh when error occurred
  net: bpfilter: use cleanup callback to release umh_info
  umh: add exit routine for UMH process
  isdn: i4l: isdn_tty: Fix some concurrency double-free bugs
  vhost/vsock: fix vhost vsock cid hashing inconsistent
  net: stmmac: Prevent RX starvation in stmmac_napi_poll()
  net: stmmac: Fix the logic of checking if RX Watchdog must be enabled
  net: stmmac: Check if CBS is supported before configuring
  net: stmmac: dwxgmac2: Only clear interrupts that are active
  net: stmmac: Fix PCI module removal leak
  tools/bpf: fix bpftool map dump with bitfields
  tools/bpf: test btf bitfield with >=256 struct member offset
  bpf: fix bpffs bitfield pretty print
  net: ethernet: mediatek: fix warning in phy_start_aneg
  tcp: change txhash on SYN-data timeout
  ...
2019-01-16 05:13:36 +12:00
Dave Hansen
e1812933b1 x86/selftests/pkeys: Fork() to check for state being preserved
There was a bug where the per-mm pkey state was not being preserved across
fork() in the child.  fork() is performed in the pkey selftests, but all of
the pkey activity is performed in the parent.  The child does not perform
any actions sensitive to pkey state.

To make the test more sensitive to these kinds of bugs, add a fork() where
the parent exits, and execution continues in the child.

To achieve this let the key exhaustion test not terminate at the first
allocation failure and fork after 2*NR_PKEYS loops and continue in the
child.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: hpa@zytor.com
Cc: peterz@infradead.org
Cc: mpe@ellerman.id.au
Cc: will.deacon@arm.com
Cc: luto@kernel.org
Cc: jroedel@suse.de
Cc: stable@vger.kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/20190102215657.585704B7@viggo.jf.intel.com
2019-01-15 10:33:45 +01:00
Sabyasachi Gupta
b686057e95 tools/testing/selftests/x86/unwind_vdso.c: Remove duplicate header
Remove sys/ucontext.h which is included more than once.

Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-01-14 18:50:42 -07:00
Colin Ian King
a180ac19ac x86/mpx/selftests: fix spelling mistake "succeded" -> "succeeded"
There is a spelling mistake eprintf error message, fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-01-14 18:50:17 -07:00
Alexandre Belloni
7b3027728f selftests: rtc: rtctest: add alarm test on minute boundary
Unfortunately, some RTC don't have a second resolution for alarm so also
test for alarm on a minute boundary.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-01-14 18:49:14 -07:00
Alexandre Belloni
fdac94489c selftests: rtc: rtctest: fix alarm tests
Return values for select are not checked properly and timeouts may not be
detected.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-01-14 18:49:05 -07:00
Linus Torvalds
40a31da414 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf tooling updates from Ingo Molnar:
 "Tooling changes only: fixes and a few stray improvements.

  Most of the diffstat is dominated by a PowerPC related fix of system
  call trace output beautification that allows us to (again) use the
  UAPI header version and sync up with the kernel's version of PowerPC
  system call names in the arch/powerpc/kernel/syscalls/syscall.tbl
  header"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  tools headers powerpc: Remove unistd.h
  perf powerpc: Rework syscall table generation
  perf symbols: Add 'arch_cpu_idle' to the list of kernel idle symbols
  tools include uapi: Sync linux/if_link.h copy with the kernel sources
  tools include uapi: Sync linux/vhost.h with the kernel sources
  tools include uapi: Sync linux/fs.h copy with the kernel sources
  perf beauty: Switch from using uapi/linux/fs.h to uapi/linux/mount.h
  tools include uapi: Grab a copy of linux/mount.h
  perf top: Lift restriction on using callchains without "sym" in --sort
  tools lib traceevent: Remove tep_data_event_from_type() API
  tools lib traceevent: Rename tep_is_file_bigendian() to tep_file_bigendian()
  tools lib traceevent: Changed return logic of tep_register_event_handler() API
  tools lib traceevent: Changed return logic of trace_seq_printf() and trace_seq_vprintf() APIs
  tools lib traceevent: Rename struct cmdline to struct tep_cmdline
  tools lib traceevent: Initialize host_bigendian at tep_handle allocation
  tools lib traceevent: Introduce new libtracevent API: tep_override_comm()
  perf tests: Add a test for the ARM 32-bit [vectors] page
  perf tools: Make find_vdso_map() more modular
  perf trace: Fix alignment for [continued] lines
  perf trace: Fix ')' placement in "interrupted" syscall lines
  ...
2019-01-11 09:44:05 -08:00
Yonghong Song
298e59d322 tools/bpf: fix bpftool map dump with bitfields
Commit 8772c8bc09 ("tools: bpftool: support pretty print
with kind_flag set") added bpftool map dump with kind_flag
support. When bitfield_size can be retrieved directly from
btf_member, function btf_dumper_bitfield() is called to
dump the bitfield. The implementation passed the
wrong parameter "bit_offset" to the function. The excepted
value is the bit_offset within a byte while the passed-in
value is the struct member offset.

This commit fixed the bug with passing correct "bit_offset"
with adjusted data pointer.

Fixes: 8772c8bc09 ("tools: bpftool: support pretty print with kind_flag set")
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-11 10:40:54 +01:00
Yonghong Song
e43207fa2e tools/bpf: test btf bitfield with >=256 struct member offset
This patch modified test_btf pretty print test to cover
the bitfield with struct member equal to or greater 256.

Without the previous kernel patch fix, the modified test will fail:

  $ test_btf -p
  ......
  BTF pretty print array(#1)......unexpected pprint output
  expected: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x1}
      read: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x0}

  BTF pretty print array(#2)......unexpected pprint output
  expected: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x1}
      read: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x0}

  PASS:6 SKIP:0 FAIL:2

With the kernel fix, the modified test will succeed:
  $ test_btf -p
  ......
  BTF pretty print array(#1)......OK
  BTF pretty print array(#2)......OK
  PASS:8 SKIP:0 FAIL:0

Fixes: 9d5f9f701b ("bpf: btf: fix struct/union/fwd types with kind_flag")
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-11 10:40:54 +01:00
Linus Torvalds
4f548c25a3 RISC-V Updates for 4.21-rc2 v2
This tag contains a handful of updates that slipped through the cracks
 during the merge window due to the holidays.  The fixes are mostly
 independent, with the exception of one larger audit-related branch.
 There's more information about the audit branch in that merge, the rest
 are:
 
 * The BSS has been moved, which shrinks flat images.
 * A fix to test-bpf so it compiles on RV64I-based systems.
 * A fix to respect the kernel commandline when there is no device tree.
 * A fix to prevent CPUs from trying to put themselves to sleep when
   bringing down the system.
 * Support for MODULE_SECTIONS on RV32I-based systems.
 * [new in v2] The addition of an SBI earlycon driver.  This is
   definately a new feature, but I'd like to include it now because I
   dropped this patch when submitting the merge window PR that removed our
   EARLY_PRINTK support.
 
 As usual, I've tested this by booting a Fedora-based image on a recent
 QEMU (this time just whatever I had lying around).
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEAM520YNJYN/OiG3470yhUCzLq0EFAlw2fYgTHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRDvTKFQLMurQaNXD/47mGXSTUWfGeW9eHh1zFYMyYWertgs
 +nB0Gkmja2sUs5DHW+JFg5TPqKw8EAK3bgrjSrFXTGBRdGeCXcHDoK0n8cQ8eL2C
 smxO2ye18db+zP76loDmvAugKsguPa0Ne7aE/aZ0qaMPQH2c6kIYgNIE09ozQWTb
 yfk/srhgQvu6WFT8dhjqK1YtCE4qPB1U7UMno3TgL/DjRQr0+uNz9MUU4kRkxEl4
 fEtV7rhDUF6gwfb4WAvlTxBrxg/ZbytHXk9swedNDLfIP2vq5C6ALtGnPBshKHWZ
 z+splwYP0g/BZ4/lXJr4vIfxS+6OuFuR8eHCh/stFijL6TkpDZOOjAb576nrpiPT
 On1h6G5/6UIGTApgDhq27FJ6s3om2gw2XiM7kbl1DoDHT4giDB6c/eK2IASRd4zC
 FHk8ya+GBdp9QFJJyL6YX392nRFEg9pLRGMYEwrvcpn5v8jz3umozv2WnWwamiR0
 kwKBJrcj2Oii5a3aBoa2EdMomC1KHNF5nKoN5W6AozIzSSLOx0wSr58ULLoGC/2h
 8Mn8hfyUCs+v+5SnXk5drrV8mXBsWAEsOPZfsnw6RUqGsjEysj9Z2UEtYY8WLPM3
 GDpsXGK1nLzgusvUoITBJi+k4zNs9mP7PBtfEHBsPH/ij5R9doCvSGco4YOXONdp
 i5ToKwmFDBJTOw==
 =WPnn
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-4.21-rc2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
 "This tag contains a handful of updates that slipped through the cracks
  during the merge window due to the holidays. The fixes are mostly
  independent, with the exception of one larger audit-related branch.

  Core RISC-V updates:

   - The BSS has been moved, which shrinks flat images.

   - A fix to test-bpf so it compiles on RV64I-based systems.

   - A fix to respect the kernel commandline when there is no device
     tree.

   - A fix to prevent CPUs from trying to put themselves to sleep when
     bringing down the system.

   - Support for MODULE_SECTIONS on RV32I-based systems.

   - [new in v2] The addition of an SBI earlycon driver. This is
     definately a new feature, but I'd like to include it now because I
     dropped this patch when submitting the merge window PR that removed
     our EARLY_PRINTK support.

  RISC-V audit updates:

   - The addition of NR_syscalls into unistd.h, which is necessary for
     CONFIG_FTRACE_SYSCALLS.

   - The definition of CREATE_TRACE_POINTS so __tracepoint_sys_{enter,exit}
     get defined.

   - A fix for trace_sys_exit() so we can enable HAVE_SYSCALL_TRACEPOINTS

  As usual, I've tested this by booting a Fedora-based image on a recent
  QEMU (this time just whatever I had lying around).

* tag 'riscv-for-linus-4.21-rc2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  tty/serial: Add RISC-V SBI earlycon support
  riscv: add HAVE_SYSCALL_TRACEPOINTS to Kconfig
  riscv: fix trace_sys_exit hook
  riscv: define CREATE_TRACE_POINTS in ptrace.c
  riscv: define NR_syscalls in unistd.h
  riscv: audit: add audit hook in do_syscall_trace_enter/exit()
  riscv: add audit support
  RISC-V: Support MODULE_SECTIONS mechanism on RV32
  MAINTAINERS: SiFive drivers: add myself as a SiFive driver maintainer
  MAINTAINERS: SiFive drivers: change the git tree to a SiFive git tree
  riscv: don't stop itself in smp_send_stop
  arch: riscv: support kernel command line forcing when no DTB passed
  tools uapi: fix RISC-V 64-bit support
  RISC-V: Make BSS section as the last section in vmlinux.lds.S
2019-01-10 13:36:53 -08:00
Anders Roxell
f98937c6bb selftests: bpf: install files tcp_(server|client)*.py
When test_tcpbpf_user runs it complains that it can't find files
tcp_server.py and tcp_client.py.

Rework so that tcp_server.py and tcp_client.py gets installed, added them
to the variable TEST_PROGS_EXTENDED.

Fixes: d6d4f60c3a ("bpf: add selftest for tcpbpf")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-10 15:56:52 +01:00
Stanislav Fomichev
e3ca63de8a selftests/bpf: add missing executables to .gitignore
We build test_libbpf with CXX to make sure linking against C++ works.

$ make -s -C tools/lib/bpf
$ git status -sb
? tools/lib/bpf/test_libbpf
$ make -s -C tools/testing/selftests/bpf
$ git status -sb
? tools/lib/bpf/test_libbpf
? tools/testing/selftests/bpf/test_libbpf

Fixes: 8c4905b995 ("libbpf: make sure bpf headers are c++ include-able")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-10 15:53:02 +01:00
Ravi Bangoria
15c03092a9 tools headers powerpc: Remove unistd.h
We use syscall.tbl to generate system call table on powerpc.

The unistd.h copy is no longer required now. Remove it.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20190110094936.3132-2-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-10 10:42:08 -03:00
Ravi Bangoria
0206131811 perf powerpc: Rework syscall table generation
Commit aff8503932 ("powerpc: add system call table generation
support") changed how systemcall table is generated for powerpc.
Incorporate these changes into perf as well.

Committer testing:

  $ podman run --entrypoint=/bin/sh --privileged -v /home/acme/git:/git --rm -ti docker.io/acmel/linux-perf-tools-build-ubuntu:18.04-x-powerpc64
  perfbuilder@d7a7af166a80:/git/perf$ head -2 /etc/os-release
  NAME="Ubuntu"
  VERSION="18.04.1 LTS (Bionic Beaver)"
  perfbuilder@d7a7af166a80:/git/perf$
  perfbuilder@d7a7af166a80:/git/perf$ make ARCH=powerpc CROSS_COMPILE=powerpc64-linux-gnu- EXTRA_CFLAGS= -C /git/linux/tools/perf O=/tmp/build/perf
  make: Entering directory '/git/linux/tools/perf'
    BUILD:   Doing 'make -j8' parallel build
    HOSTCC   /tmp/build/perf/fixdep.o
    HOSTLD   /tmp/build/perf/fixdep-in.o
    LINK     /tmp/build/perf/fixdep
  Warning: Kernel ABI header at 'tools/include/uapi/linux/mman.h' differs from latest version at 'include/uapi/linux/mman.h'
  diff -u tools/include/uapi/linux/mman.h include/uapi/linux/mman.h
  sh: 1: command: Illegal option -c

  Auto-detecting system features:
  ...                         dwarf: [ on  ]
  ...            dwarf_getlocations: [ on  ]
  ...                         glibc: [ on  ]
  ...                          gtk2: [ OFF ]
  ...                      libaudit: [ OFF ]
  ...                        libbfd: [ OFF ]
  ...                        libelf: [ on  ]
  ...                       libnuma: [ OFF ]
  ...        numa_num_possible_cpus: [ OFF ]
  ...                       libperl: [ OFF ]
  ...                     libpython: [ OFF ]
  ...                      libslang: [ OFF ]
  ...                     libcrypto: [ OFF ]
  ...                     libunwind: [ OFF ]
  ...            libdw-dwarf-unwind: [ on  ]
  ...                          zlib: [ on  ]
  ...                          lzma: [ OFF ]
  ...                     get_cpuid: [ OFF ]
  ...                           bpf: [ on  ]

  Makefile.config:445: No sys/sdt.h found, no SDT events are defined, please install systemtap-sdt-devel or systemtap-sdt-dev
  Makefile.config:491: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR
  Makefile.config:583: No libcrypto.h found, disables jitted code injection, please install libssl-devel or libssl-dev
  Makefile.config:598: slang not found, disables TUI support. Please install slang-devel, libslang-dev or libslang2-dev
  Makefile.config:612: GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev
  Makefile.config:639: Missing perl devel files. Disabling perl scripting support, please install perl-ExtUtils-Embed/libperl-dev
  Makefile.config:666: No python interpreter was found: disables Python support - please install python-devel/python-dev
  Makefile.config:721: No bfd.h/libbfd found, please install binutils-dev[el]/zlib-static/libiberty-dev to gain symbol demangling
  Makefile.config:750: No liblzma found, disables xz kernel module decompression, please install xz-devel/liblzma-dev
  Makefile.config:763: No numa.h found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev
  Makefile.config:814: No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-dev[el]/libbabeltrace-ctf-dev
  Makefile.config:840: No alternatives command found, you need to set JDIR= to point to the root of your Java directory
    GEN      /tmp/build/perf/common-cmds.h
  <SNIP>
    CC       /tmp/build/perf/util/syscalltbl.o
  <SNIP>
    LD       /tmp/build/perf/libperf-in.o
    AR       /tmp/build/perf/libperf.a
    LINK     /tmp/build/perf/perf
  make: Leaving directory '/git/linux/tools/perf'
  perfbuilder@d7a7af166a80:/git/perf$ head /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_64.c
  static const char *syscalltbl_powerpc_64[] = {
  	[0] = "restart_syscall",
  	[1] = "exit",
  	[2] = "fork",
  	[3] = "read",
  	[4] = "write",
  	[5] = "open",
  	[6] = "close",
  	[7] = "waitpid",
  	[8] = "creat",
  perfbuilder@d7a7af166a80:/git/perf$ tail /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_64.c
  	[381] = "pwritev2",
  	[382] = "kexec_file_load",
  	[383] = "statx",
  	[384] = "pkey_alloc",
  	[385] = "pkey_free",
  	[386] = "pkey_mprotect",
  	[387] = "rseq",
  	[388] = "io_pgetevents",
  };
  #define SYSCALLTBL_POWERPC_64_MAX_ID 388
  perfbuilder@d7a7af166a80:/git/perf$ head /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_32.c
  static const char *syscalltbl_powerpc_32[] = {
  	[0] = "restart_syscall",
  	[1] = "exit",
  	[2] = "fork",
  	[3] = "read",
  	[4] = "write",
  	[5] = "open",
  	[6] = "close",
  	[7] = "waitpid",
  	[8] = "creat",
  perfbuilder@d7a7af166a80:/git/perf$ tail /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_32.c
  	[381] = "pwritev2",
  	[382] = "kexec_file_load",
  	[383] = "statx",
  	[384] = "pkey_alloc",
  	[385] = "pkey_free",
  	[386] = "pkey_mprotect",
  	[387] = "rseq",
  	[388] = "io_pgetevents",
  };
  #define SYSCALLTBL_POWERPC_32_MAX_ID 388
  perfbuilder@d7a7af166a80:/git/perf$

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20190110094936.3132-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-10 10:34:52 -03:00
Arnaldo Carvalho de Melo
549aff770c perf symbols: Add 'arch_cpu_idle' to the list of kernel idle symbols
When testing 'perf top' on a armhf system (32-bit, Orange Pi Zero), I
noticed that 'arch_cpu_idle' dominated, add it to the list of idle
symbols, so that we can see what is that being done when not idle.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-4q2b5g4p2hrstrhp9t2mrlho@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-09 16:21:15 -03:00
Arnaldo Carvalho de Melo
498c203d85 tools include uapi: Sync linux/if_link.h copy with the kernel sources
To pick the changes from:

  a428afe82f ("net: bridge: add support for user-controlled bool options")
  a025fb5f49 ("geneve: Allow configuration of DF behaviour")
  b4d3069783 ("vxlan: Allow configuration of DF behaviour")

Silencing this tools/ build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/if_link.h' differs from latest version at 'include/uapi/linux/if_link.h'

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: Stefano Brivio <sbrivio@redhat.com>
Link: https://lkml.kernel.org/n/tip-wq410s2wuqv5k980bidw0ju8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-09 10:02:12 -03:00
Miles Chen
aff876dcf4 tools/vm/page_owner: use page_owner_sort in the use example
The example in comment does not useable because the output binary is
named "page_owner_sort", not "sort".

Also add a reference to Documentation/vm/page_owner.rst

Link: http://lkml.kernel.org/r/1546515361-8317-1-git-send-email-miles.chen@mediatek.com
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-08 17:15:11 -08:00
Ido Schimmel
4fabf3bf93 selftests: forwarding: Add a test for VLAN deletion
Add a VLAN on a bridge port, delete it and make sure the PVID VLAN is
not affected.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08 16:53:54 -05:00
Ido Schimmel
289fb44df4 selftests: forwarding: Fix test for different devices
When running the test on the Spectrum ASIC the generated packets are
counted on the ingress filter and injected back to the pipeline because
of the 'pass' action. The router block then drops the packets due to
checksum error, as the test generates packets with zero checksum.

When running the test on an emulator that is not as strict about
checksum errors the test fails since packets are counted twice. Once by
the emulated ASIC on its ingress filter and again by the kernel as the
emulator does not perform checksum validation and allows the packets to
be trapped by a matching host route.

Fix this by changing the action to 'drop', which will prevent the packet
from continuing further in the pipeline to the router block.

For veth pairs this change is essentially a NOP given packets are only
processed once (by the kernel).

Fixes: a0b61f3d8e ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08 16:53:54 -05:00
Ido Schimmel
16dc42e451 selftests: mlxsw: Add a test case for VLAN addition error flow
Add a test case for the issue fixed by previous commit. In case the
offloading of an unsupported VxLAN tunnel was triggered by adding the
mapped VLAN to a local port, then error should be returned to the user.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08 16:53:54 -05:00
Arnaldo Carvalho de Melo
ee412f1469 tools include uapi: Sync linux/vhost.h with the kernel sources
To get the changes in:

  4b86713236 ("vhost: split structs into a separate header file")

Silencing this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
  diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h

Those didn't touch things used in tools, i.e. the following continues
working:

  $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh
  static const char *vhost_virtio_ioctl_cmds[] = {
          [0x00] = "SET_FEATURES",
          [0x01] = "SET_OWNER",
          [0x02] = "RESET_OWNER",
          [0x03] = "SET_MEM_TABLE",
          [0x04] = "SET_LOG_BASE",
          [0x07] = "SET_LOG_FD",
          [0x10] = "SET_VRING_NUM",
          [0x11] = "SET_VRING_ADDR",
          [0x12] = "SET_VRING_BASE",
          [0x13] = "SET_VRING_ENDIAN",
          [0x14] = "GET_VRING_ENDIAN",
          [0x20] = "SET_VRING_KICK",
          [0x21] = "SET_VRING_CALL",
          [0x22] = "SET_VRING_ERR",
          [0x23] = "SET_VRING_BUSYLOOP_TIMEOUT",
          [0x24] = "GET_VRING_BUSYLOOP_TIMEOUT",
          [0x25] = "SET_BACKEND_FEATURES",
          [0x30] = "NET_SET_BACKEND",
          [0x40] = "SCSI_SET_ENDPOINT",
          [0x41] = "SCSI_CLEAR_ENDPOINT",
          [0x42] = "SCSI_GET_ABI_VERSION",
          [0x43] = "SCSI_SET_EVENTS_MISSED",
          [0x44] = "SCSI_GET_EVENTS_MISSED",
          [0x60] = "VSOCK_SET_GUEST_CID",
          [0x61] = "VSOCK_SET_RUNNING",
  };
  static const char *vhost_virtio_ioctl_read_cmds[] = {
          [0x00] = "GET_FEATURES",
          [0x12] = "GET_VRING_BASE",
          [0x26] = "GET_BACKEND_FEATURES",
  };
  $

At some point in the eBPFication of perf, using something like:

	# perf trace -e ioctl(cmd=VHOST_VRING*)

Will setup a BPF filter right at the raw_syscalls:sys_enter tracepoint,
i.e. filtering at the origin.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-g28usrt7l59lwq3wuh8vzbig@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08 14:09:33 -03:00
Arnaldo Carvalho de Melo
fdc42ca190 tools include uapi: Sync linux/fs.h copy with the kernel sources
To get the changes in:

  e262e32d6b ("vfs: Suppress MS_* flag defs within the kernel unless explicitly enabled")

That made the mount flags string table generator to switch to using
mount.h instead.

This silences the following perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
  diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-mosz81pa6iwxko4p2owbm3ss@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08 14:09:33 -03:00
Arnaldo Carvalho de Melo
1c23397d2a perf beauty: Switch from using uapi/linux/fs.h to uapi/linux/mount.h
As now we'll update our fs.h copy and what tools/perf/trace/beauty/mount_flags.sh
needs just got moved to mount.h, use that instead.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ls19h376xukeouxrw9dswkcn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08 14:09:33 -03:00
Arnaldo Carvalho de Melo
250bfc87dd tools include uapi: Grab a copy of linux/mount.h
We were using a copy of uapi/linux/fs.h to create the mount syscall
'flags' string table to use in 'perf trace', to convert from the number
obtained via the raw_syscalls:sys_enter into a string, using
tools/perf/trace/beauty/mount_flags.sh, but in e262e32d6b ("vfs:
Suppress MS_* flag defs within the kernel unless explicitly enabled")
those defines got moved to linux/mount.h, so grab a copy of mount.h too.

Keep the uapi/linux/fs.h as we'll use it for the SEEK_ constants.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-i2ricmpwpdrpukfq3298jr1z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08 14:09:28 -03:00