Commit Graph

3685 Commits

Author SHA1 Message Date
Pierre-Yves MORDRET aeb068c572 i2c: i2c-stm32f7: add driver
This patch adds initial support for the STM32F7 I2C controller.

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-09-14 17:34:43 +02:00
Pierre-Yves MORDRET df8c847b53 i2c: i2c-stm32f4: use generic definition of speed enum
This patch uses a more generic definition of speed enum for i2c-stm32f4
driver.

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Reviewed-by: Ludovic BARRE <ludovic.barre@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-09-14 17:34:29 +02:00
Thor Thayer 0560ad5762 i2c: altera: Add Altera I2C Controller driver
Add driver support for the Altera I2C Controller. The I2C
controller is soft IP for use in FPGAs.

Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-09-13 23:37:16 +02:00
Linus Torvalds d2d8f51e28 Merge branch 'i2c/for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:

 - new drivers for Spreadtrum I2C, Intel Cherry Trail Whiskey Cove SMBUS

 - quite some driver updates

 - cleanups for the i2c-mux subsystem

 - some subsystem-wide constification

 - further cleanup of include/linux/i2c

* 'i2c/for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits)
  i2c: sprd: Fix undefined reference errors
  i2c: nomadik: constify amba_id
  i2c: versatile: Make i2c_algo_bit_data const
  i2c: busses: make i2c_adapter_quirks const
  i2c: busses: make i2c_adapter const
  i2c: busses: make i2c_algorithm const
  i2c: Add Spreadtrum I2C controller driver
  dt-bindings: i2c: Add Spreadtrum I2C controller documentation
  i2c-cht-wc: make cht_wc_i2c_adap_driver static
  MAINTAINERS: Add entry for drivers/i2c/busses/i2c-cht-wc.c
  i2c: aspeed: Retain delay/setup/hold values when configuring bus frequency
  dt-bindings: i2c: eeprom: Document vendor to be used and deprecated ones
  i2c: i801: Restore the presence state of P2SB PCI device after reading BAR
  MAINTAINERS: drop entry for Blackfin I2C and Sonic's email
  blackfin: merge the two TWI header files
  i2c: davinci: Preserve return value of devm_clk_get
  i2c: mediatek: Add i2c compatible for MediaTek MT7622
  dt-bindings: i2c: Add MediaTek MT7622 i2c binding
  dt-bindings: i2c: modify information formats
  i2c: mux: i2c-arb-gpio-challenge: allow compiling w/o OF support
  ...
2017-09-09 14:18:40 -07:00
Baolin Wang 8ce906c13c i2c: sprd: Fix undefined reference errors
Since the i2c driver of Spreadtrum can not be build as one module, thus
it should depend on CONFIG_I2C is build in.

Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-31 20:32:33 +02:00
Hans de Goede 231d069fcd i2c: designware: Round down ACPI provided clk to nearest supported clk
The Lenovo Miix2 8 DSDT contains an i2c clk / bus speed of 1700000 Hz
for one if its devices, which is not supported.

This is the second DSDT to show up with an unsupported clk in a short
time, remove the hardcoded fix for DSDTs with a 1 MiHz clock and simply
always round down the clk to the nearest supported value.

Reported-by: russianneuromancer@ya.ru
Fixes: 682c6c2188 ("i2c: designware: Some broken DSTDs use 1MiHz ...")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-31 20:27:39 +02:00
Arvind Yadav 2601a0032f i2c: nomadik: constify amba_id
amba_id are not supposed to change at runtime. All functions
working with const amba_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-29 22:35:14 +02:00
Bhumika Goyal a89c22d59e i2c: versatile: Make i2c_algo_bit_data const
Make this const as it is only used in a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-29 22:34:12 +02:00
Bhumika Goyal ae3923a284 i2c: busses: make i2c_adapter_quirks const
Make these const as they are only stored as a reference in the quirks
field of an i2c_adapter structure, which is const. Done using
Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-29 22:32:47 +02:00
Bhumika Goyal 329430ccfc i2c: busses: make i2c_adapter const
Make these const as they are only used in a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-29 22:26:08 +02:00
Bhumika Goyal ad3caf8abc i2c: busses: make i2c_algorithm const
Make these const as they are only stored in the algo field of
i2c_adapter structure, which is const.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-29 22:20:20 +02:00
Stephen Douthit ba201c4f5e i2c: ismt: Return EMSGSIZE for block reads with bogus length
Compare the number of bytes actually seen on the wire to the byte
count field returned by the slave device.

Previously we just overwrote the byte count returned by the slave
with the real byte count and let the caller figure out if the
message was sane.

Signed-off-by: Stephen Douthit <stephend@adiengineering.com>
Tested-by: Dan Priamo <danp@adiengineering.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
2017-08-29 22:13:50 +02:00
Stephen Douthit b6c159a9cb i2c: ismt: Don't duplicate the receive length for block reads
According to Table 15-14 of the C2000 EDS (Intel doc #510524) the
rx data pointed to by the descriptor dptr contains the byte count.

desc->rxbytes reports all bytes read on the wire, including the
"byte count" byte.  So if a device sends 4 bytes in response to a
block read, on the wire and in the DMA buffer we see:

count data1 data2 data3 data4
 0x04  0xde  0xad  0xbe  0xef

That's what we want to return in data->block to the next level.

Instead we were actually prefixing that with desc->rxbytes:

bad
count count data1 data2 data3 data4
 0x05  0x04  0xde  0xad  0xbe  0xef

This was discovered while developing a BMC solution relying on the
ipmi_ssif.c driver which was trying to interpret the bogus length
field as part of the IPMI response.

Signed-off-by: Stephen Douthit <stephend@adiengineering.com>
Tested-by: Dan Priamo <danp@adiengineering.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
2017-08-29 22:12:30 +02:00
Baolin Wang 8b9ec07198 i2c: Add Spreadtrum I2C controller driver
This patch adds the I2C controller driver for Spreadtrum SC9860 platform.

Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-29 12:13:35 +02:00
Colin Ian King 5ca21c13c9 i2c-cht-wc: make cht_wc_i2c_adap_driver static
The structure cht_wc_i2c_adap_driver is local to the source
and does not need to be in global scope, so make it static.

Cleans up sparse warning:
symbol 'cht_wc_i2c_adap_driver' was not declared. Should it be static?

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-29 12:09:06 +02:00
Andrew Jeffery 95fd3ad9cd i2c: aspeed: Retain delay/setup/hold values when configuring bus frequency
In addition to the base, low and high clock configuration, the AC timing
register #1 on the AST2400 houses fields controlling:

1. tBUF: Minimum delay between Stop and Start conditions
2. tHDSTA: Hold time for the Start condition
3. tACST: Setup time for Start and Stop conditions, and hold time for the
   Repeated Start condition

These values are defined in hardware on the AST2500 and therefore don't
need to be set.

aspeed_i2c_init_clk() was performing a direct write of the generated
clock values rather than a read/mask/modify/update sequence to retain
tBUF, tHDSTA and tACST, and therefore cleared the tBUF, tHDSTA and tACST
fields on the AST2400. This resulted in a delay/setup/hold time of 1
base clock, which in some configurations is not enough for some devices
(e.g. the MAX31785 fan controller, with an APB of 48MHz and a desired
bus speed of 100kHz).

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-28 18:05:03 +02:00
Qiuxu Zhuo bfd4473b85 i2c: i801: Restore the presence state of P2SB PCI device after reading BAR
Sun, Yunying reported the following failure on Denverton micro-server:

 EDAC DEBUG: pnd2_init:
 EDAC DEBUG: pnd2_probe:
 EDAC DEBUG: dnv_rd_reg: Read b_cr_tolud_pci=00000000_80000000
 EDAC DEBUG: dnv_rd_reg: Read b_cr_touud_lo_pci=00000000_80000000
 EDAC DEBUG: dnv_rd_reg: Read b_cr_touud_hi_pci=00000000_00000004
 EDAC DEBUG: dnv_rd_reg: Read b_cr_asym_mem_region0_mchbar=00000000_00000000
 EDAC DEBUG: dnv_rd_reg: Read b_cr_asym_mem_region1_mchbar=00000000_00000000
 EDAC DEBUG: dnv_rd_reg: Read b_cr_mot_out_base_mchbar=00000000_00000000
 EDAC DEBUG: dnv_rd_reg: Read b_cr_mot_out_mask_mchbar=00000000_00000000
 EDAC pnd2: Failed to register device with error -19.

On Denverton micro-server, the presence of the P2SB bridge PCI device is
enabled or disabled by the item 'RelaxSecConf' in BIOS setup menu. When
'RelaxSecConf' is enabled, the P2SB PCI device is present and the pnd2_edac
EDAC driver also uses it to get BAR. Hiding the P2SB PCI device caused the
pnd2_edac EDAC driver failed to get BAR then reported the above failure.

Therefor, store the presence state of P2SB PCI device before unhiding it
for reading BAR and restore the presence state after reading BAR.

Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Reported-by: Yunying Sun <yunying.sun@intel.com>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-28 17:29:48 +02:00
Wolfram Sang a1cc5a57e4 blackfin: merge the two TWI header files
There seems to be no need for separate ones since all users include both
files anyhow. Merge them because include/linux/i2c is to be deprecated.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-27 15:37:18 +02:00
Franklin S Cooper Jr cc209ac81c i2c: davinci: Preserve return value of devm_clk_get
The i2c driver can run into driver dependency issues if its loaded
before a clock driver it depends on. Therefore, EPROBE_DEFER may be
returned by devm_clk_get and should be returned in probe to allow the
kernel to reprobe the driver at a later time. This patch allows the error
value returned by devm_clk_get to be passed through and not overwritten.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-27 15:34:09 +02:00
Jun Gao 1304fe0916 i2c: mediatek: Add i2c compatible for MediaTek MT7622
Add i2c compatible for MT7622. Compare to MT8173 i2c controller,
MT7622 limits message numbers to 255, and does not support 4GB
DMA mode.

Signed-off-by: Jun Gao <jun.gao@mediatek.com>
Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-27 15:31:00 +02:00
Wolfram Sang 8ce0436789 Merge branch 'i2c-mux/for-next' of https://github.com/peda-r/i2c-mux into i2c/for-4.14 2017-08-27 15:14:49 +02:00
Peter Rosin fabf08a0cd i2c: mux: i2c-arb-gpio-challenge: allow compiling w/o OF support
It simplifies some tests.

Signed-off-by: Peter Rosin <peda@axentia.se>
2017-08-22 08:37:03 +02:00
Hans de Goede ed1094012a i2c-cht-wc: Workaround CHT GPIO controller IRQ issues
The Cherry Trail Whiskey Cove PMIC's IRQ line is attached to one of
the GPIOs of the Cherry Trail SoC. The CHT GPIO controller sometimes
fails to deliver IRQs (seen when there is an IRQ storm on another pin).

This commit works around this by reducing the long timeout which was
a poor attempt to workaround this from 3s to 30ms and after that
manually checking the status register for transfer completion by
calling the threaded IRQ handler directly.

This is safe todo as the entire threaded IRQ handler is protected
by a mutex.

Note 30ms should be more then long enough, at 100KHz any smbus single
byte transaction should be finished in 4ms.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-17 21:53:03 +02:00
Hans de Goede 8de60c636e i2c-cht-wc: Ack read irqs after reading the data register
Testing has shown that writing 1 to clear the read-complete irq does
not work until the data register has been read first.

This commit fixes the driver to read the data register first, halving the
amount of interrupts in most cases since we mostly read on this i2c bus.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-17 21:53:02 +02:00
Hans de Goede a5a46bd008 i2c-cht-wc: Add locking to interrupt / smbus_xfer functions
Although unlikely without locking the smbux_xfer function may miss
the nack flag and further fixes in this patch-set add some more
complex constructions which need protection.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-17 21:53:02 +02:00
Eugeniu Rosca 75fdc51832 i2c: sh_mobile: avoid unused ret variable
Fix smatch warning:
drivers/i2c/busses/i2c-sh_mobile.c:564 \
  sh_mobile_i2c_request_dma_chan() warn: unused return: ret = PTR_ERR()

Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-17 21:52:57 +02:00
Eugeniu Rosca 8ae034c2ca i2c: rcar: avoid unused ret variable
Fix smatch warning:
drivers/i2c/busses/i2c-rcar.c:628 \
  rcar_i2c_request_dma_chan() warn: unused return: ret = PTR_ERR()

Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-17 21:52:36 +02:00
Jarkko Nikula 2a86cdd2e7 i2c: designware: Fix runtime PM for I2C slave mode
I2C slave controller must be powered and active all the time when I2C
slave backend is registered in order to let master address and
communicate with us.

Now if the controller is runtime PM capable it will be suspended after
probe and cannot ever respond to the master or generate interrupts.

Fix this by resuming the controller when I2C slave backend is registered
and let it suspend after unregistering.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-17 17:55:29 +02:00
Jarkko Nikula 733f656397 i2c: designware: Remove needless pm_runtime_put_noidle() call
I guess pm_runtime_put_noidle() call in i2c_dw_probe_slave() was copied
by accident from similar master mode adapter registration code. It is
unbalanced due missing pm_runtime_get_noresume() but harmless since it
doesn't decrease dev->power.usage_count below zero.

In theory we can hit similar needless runtime suspend/resume cycle
during slave mode adapter registration that was happening when
registering the master mode adapter. See commit cd998ded5c ("i2c:
designware: Prevent runtime suspend during adapter registration").

However, since we are slave, we can consider it as a wrong configuration
if we have other slaves attached under this adapter and can omit the
pm_runtime_get_noresume()/pm_runtime_put_noidle() calls for simplicity.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-17 17:55:20 +02:00
Arvind Yadav c6a6bdbdc6 i2c: taos-evm: constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-17 17:36:42 +02:00
Dan Carpenter be9bac020c i2c: mux: pinctrl: potential NULL dereference on error
If i2c_mux_alloc() fails then we'd have a NULL dereference here.

Fixes: c4aee3e1b0 ("i2c: mux: pinctrl: remove platform_data")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-08-17 14:19:56 +02:00
Brendan Higgins f1c0b7e448 i2c: aspeed: fixed potential null pointer dereference
Before I skipped null checks when the master is in the STOP state; this
fixes that.

Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Fixes: f327c686d3 ("i2c: aspeed: added driver for Aspeed I2C")
2017-08-14 22:08:13 +02:00
Brendan Higgins 87b59ff8d1 i2c: aspeed: add proper support fo 24xx clock params
24xx BMCs have larger clock divider granularity which can cause problems
when trying to set them as 25xx clock dividers; this adds clock setting
code specific to 24xx.

This also fixes a potential issue where clock dividers were rounded down
instead of up.

Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-14 22:05:56 +02:00
Philipp Zabel 94d3b651c0 i2c: tegra: explicitly request exclusive reset control
Commit a53e35db70 ("reset: Ensure drivers are explicit when requesting
reset lines") started to transition the reset control request API calls
to explicitly state whether the driver needs exclusive or shared reset
control behavior. Convert all drivers requesting exclusive resets to the
explicit API call so the temporary transition helpers can be removed.

No functional changes.

Cc: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-i2c@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-14 21:40:33 +02:00
Philipp Zabel 96ae9eab03 i2c: sun6i-pw2i: explicitly request exclusive reset control
Commit a53e35db70 ("reset: Ensure drivers are explicit when requesting
reset lines") started to transition the reset control request API calls
to explicitly state whether the driver needs exclusive or shared reset
control behavior. Convert all drivers requesting exclusive resets to the
explicit API call so the temporary transition helpers can be removed.

No functional changes.

Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: linux-i2c@vger.kernel.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-14 21:40:21 +02:00
Philipp Zabel 961e026a06 i2c: stm32f4: explicitly request exclusive reset control
Commit a53e35db70 ("reset: Ensure drivers are explicit when requesting
reset lines") started to transition the reset control request API calls
to explicitly state whether the driver needs exclusive or shared reset
control behavior. Convert all drivers requesting exclusive resets to the
explicit API call so the temporary transition helpers can be removed.

No functional changes.

Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: linux-i2c@vger.kernel.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-14 21:40:15 +02:00
Philipp Zabel 9024ca12ed i2c: mv64xxx: explicitly request exclusive reset control
Commit a53e35db70 ("reset: Ensure drivers are explicit when requesting
reset lines") started to transition the reset control request API calls
to explicitly state whether the driver needs exclusive or shared reset
control behavior. Convert all drivers requesting exclusive resets to the
explicit API call so the temporary transition helpers can be removed.

No functional changes.

Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-i2c@vger.kernel.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-14 21:40:07 +02:00
Anton Vasilyev 42543aeb48 i2c: simtec: use release_mem_region instead of release_resource
Use api pair of request_mem_region and release_mem_region
instead of release_resource.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-14 21:39:21 +02:00
Javier Martinez Canillas f4b17a14fa i2c: core: Make comment about I2C table requirement to reflect the code
I2C drivers were required to have an I2C device ID table even if were for
devices that would only be registered using a specific firmware interface
(e.g: OF or ACPI).

But commit da10c06a04 ("i2c: Make I2C ID tables non-mandatory for DT'ed
devices") changed the I2C core to relax the requirement and allow drivers
to avoid defining this table.

Unfortunately it only took into account drivers for OF-only devices and
forgot about ACPI-only ones, and this was fixed by commit c64ffff7a9
("i2c: core: Allow empty id_table in ACPI case as well").

But the latter didn't update the original comment, so it doesn't reflect
what the code does now.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-14 21:33:46 +02:00
Jarkko Nikula 4e2d93de07 i2c: designware: Fix standard mode speed when configuring the slave mode
Code sets bit DW_IC_CON_SPEED_FAST (0x4) always when configuring the slave
mode. This results incorrect register value DW_IC_CON_SPEED_HIGH (0x6)
when OR'ed together with DW_IC_CON_SPEED_STD (0x2).

Remove this and let the code set the speed mode bits according to clock
frequency or default to fast mode.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-14 21:13:29 +02:00
Jarkko Nikula 984277a041 i2c: designware: Fix oops from i2c_dw_irq_handler_slave
When i2c-designware is initialized in slave mode the
i2c-designware-slave.c: i2c_dw_irq_handler_slave() can hit a NULL
pointer dereference when I2C slave backend is not registered but code is
accessing the struct dw_i2c_dev.slave without testing is it NULL.

We might get spurious interrupts from other devices or from IRQ core
during unloading the driver when CONFIG_DEBUG_SHIRQ is set. Existing
check for enable and IRQ status is not enough since device can be power
gated and those bits may read 1.

Fix this by handling the interrupt only when also struct dw_i2c_dev.slave
is set.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-14 21:11:19 +02:00
Ulf Hansson a23318feef i2c: designware: Fix system suspend
The commit 8503ff1665 ("i2c: designware: Avoid unnecessary resuming
during system suspend"), may suggest to the PM core to try out the so
called direct_complete path for system sleep. In this path, the PM core
treats a runtime suspended device as it's already in a proper low power
state for system sleep, which makes it skip calling the system sleep
callbacks for the device, except for the ->prepare() and the ->complete()
callbacks.

However, the PM core may unset the direct_complete flag for a parent
device, in case its child device are being system suspended before. In this
scenario, the PM core invokes the system sleep callbacks, no matter if the
device is runtime suspended or not.

Particularly in cases of an existing i2c slave device, the above path is
triggered, which breaks the assumption that the i2c device is always
runtime resumed whenever the dw_i2c_plat_suspend() is being called.

More precisely, dw_i2c_plat_suspend() calls clk_core_disable() and
clk_core_unprepare(), for an already disabled/unprepared clock, leading to
a splat in the log about clocks calls being wrongly balanced and breaking
system sleep.

To still allow the direct_complete path in cases when it's possible, but
also to keep the fix simple, let's runtime resume the i2c device in the
->suspend() callback, before continuing to put the device into low power
state.

Note, in cases when the i2c device is attached to the ACPI PM domain, this
problem doesn't occur, because ACPI's ->suspend() callback, assigned to
acpi_subsys_suspend(), already calls pm_runtime_resume() for the device.

It should also be noted that this change does not fix commit 8503ff1665
("i2c: designware: Avoid unnecessary resuming during system suspend").
Because for the non-ACPI case, the system sleep support was already broken
prior that point.

Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-14 21:02:42 +02:00
Peter Rosin fc2046718a i2c: mux: pinctrl: drop the idle_state member
The information is available elsewhere.

Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-08-14 11:54:27 +02:00
Peter Rosin c4aee3e1b0 i2c: mux: pinctrl: remove platform_data
No platform (at least no upstreamed platform) has ever used this
platform_data. Just drop it and simplify the code.

Reviewed-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-08-14 11:54:17 +02:00
Wolfram Sang 26b1083b45 i2c: mux: mlxcpld: move header file out of I2C realm
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-08-14 11:54:10 +02:00
Wolfram Sang 2be03aedbb i2c: mux: pca954x: move header file out of I2C realm
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-08-14 11:54:03 +02:00
Wolfram Sang 885e42d9c2 i2c: mux: pca9541: sort include files
Make it consistent with the other drivers.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-08-14 11:53:58 +02:00
Hans de Goede 17a924bfe0 i2c-cht-wc: Add Intel Cherry Trail Whiskey Cove SMBUS controller driver
The Intel Cherry Trail Whiskey Cove PMIC does not contain a builtin
battery charger, instead boards with this PMIC use an external TI
bq24292i charger IC, which is connected to a SMBUS controller built into
the PMIC.

This commit adds an i2c-bus driver for the PMIC's builtin SMBUS
controller. The probe function for this i2c-bus will also register an
i2c-client for the TI bq24292i charger after the i2c-bus has been
registered.

Note that several device-properties are set on the client-device to
tell the bq24190 power-supply driver to integrate the Whiskey Cove PMIC
and e.g. use the PMIC's BC1.2 detection (through extcon) to determine
the maximum input current.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-13 21:36:22 +02:00
Andy Yan 0dbb9634e5 i2c: rk3x: add support for rv1108
Support for the i2c controller on rv1108 soc.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-12 16:39:47 +02:00
Masahiro Yamada 822c8d45a1 i2c: uniphier-f: add suspend / resume support
When resuming, set up registers that have been lost in the sleep state.
Also, add clock handling in the resume / suspend hooks.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-12 15:38:23 +02:00
Masahiro Yamada 9f9d6a4010 i2c: uniphier: add suspend / resume support
When resuming, set up registers that have been lost in the sleep state.
Also, add clock handling in the resume / suspend hooks.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-12 15:38:13 +02:00
Gustavo A. R. Silva 8dc0f8c73c i2c: constify internal structures
Check for i2c_algorithm and i2c_adapter_quirks structures that are only
stored in the algo and quirks fields of an i2c_adapter structure
correspondingly. These fields are declared const, so i2c_algorithm and
i2c_adapter_quirks structures that have this property can be declared
as const also.

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> (for designware)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-12 13:25:17 +02:00
Rob Herring 453a237ccf i2c: Convert to using %pOF instead of full_name
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-07-31 17:19:35 +02:00
Russell King 5871a1538c i2c: allow i2c-versatile for ARM MPS platforms
Allow i2c-versatile to be enabled for ARM MPS platforms.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-07-31 17:05:16 +02:00
Masahiro Yamada 9242e72aae i2c: use dev_get_drvdata() to get private data in suspend/resume hooks
Several drivers call to_platform_device() to get platform_device
and pass it to platform_get_drvdata().  In platform_get_drvdata(),
the platform_device is converted back to struct device again.

Use dev_get_drvdata() to avoid platform_device/device dance.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> (for DesignWare only)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-07-31 17:03:32 +02:00
Wolfram Sang c69b9e1278 Merge branch 'i2c-mux/for-current' of https://github.com/peda-r/i2c-mux into i2c/for-current 2017-07-31 16:12:19 +02:00
Jun Gao f2326401b8 i2c: mediatek: send i2c master code at 400k
The speed of sending i2c master code in high-speed mode depends on
source clock, clock-div and TIMING register. The source clock and
clock-div of different SoC are not all the same. In order to send
i2c master code at 400k in high-speed mode, a appropriate value
should be set to TIMING register for a certain source clock and
clock-div.

Signed-off-by: Jun Gao <jun.gao@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-07-31 16:02:59 +02:00
Hans de Goede 682c6c2188 i2c: designware: Some broken DSTDs use 1MiHz instead of 1MHz
At least the Acer Iconia Tab8 / aka W1-810 uses 1MiHz instead of
1MHz for one of its busses, fix this up to 1MHz instead of failing
the probe of that bus.

This fixes the accelerometer on the Acer Iconia Tab8 not working.

Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-07-31 15:55:41 +02:00
Hans de Goede 22acc37b86 i2c: designware: Print clock freq on invalid clock freq error
When we refuse to probe due to an invalid clock frequency, log
the frequency which is causing this error.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-07-31 15:55:41 +02:00
Andy Shevchenko c64ffff7a9 i2c: core: Allow empty id_table in ACPI case as well
For now empty ID table is not allowed with ACPI and prevents driver to
be probed.

Add a check to allow empty ID table.

This introduces a helper i2c_acpi_match_device().

Note, we rename some static function in i2c-core-acpi.c to distinguish
with public API.

Fixes: da10c06a04 ("i2c: Make I2C ID tables non-mandatory for DT'ed devices")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Rajmohan Mani <rajmohan.mani@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[wsa: needed to get some drivers probed again]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-07-31 15:50:33 +02:00
Chris Gorman d1510a2e5a i2c: mux: pinctrl: mention correct module name in Kconfig help text
Kconfig says the resulting module is pinctrl-i2cmux, but the module when
built is i2c-mux-pinctrl.

Fixes: ae58d1e406 ("i2c: Add generic I2C multiplexer using pinctrl API")
Signed-off-by: Chris Gorman <chrisjohgorman@gmail.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-07-17 06:24:37 +02:00
Linus Torvalds 235b84fc86 Merge branch 'i2c/for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
 "This pull request contains:

   - i2c core reorganization. One source file became too monolithic. It
     is now split up, yet we still have the same named object as the
     final output. This should ease maintenance.

   - new drivers: ZTE ZX2967 family, ASPEED 24XX/25XX

   - designware driver gained slave mode support

   - xgene-slimpro driver gained ACPI support

   - bigger overhaul for pca-platform driver

   - the algo-bit module now supports messages with enforced STOP

   - slightly bigger than usual set of driver updates and improvements

  and with much appreciated quality assurance from Andy Shevchenko"

* 'i2c/for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (51 commits)
  i2c: Provide a stub for i2c_detect_slave_mode()
  i2c: designware: Let slave adapter support be optional
  i2c: designware: Make HW init functions static
  i2c: designware: fix spelling mistakes
  i2c: pca-platform: propagate error from i2c_pca_add_numbered_bus
  i2c: pca-platform: correctly set algo_data.reset_chip
  i2c: acpi: Do not create i2c-clients for LNXVIDEO ACPI devices
  i2c: designware: enable SLAVE in platform module
  i2c: designware: add SLAVE mode functions
  i2c: zx2967: drop COMPILE_TEST dependency
  i2c: zx2967: always use the same device when printing errors
  i2c: pca-platform: use dev_warn/dev_info instead of printk
  i2c: pca-platform: use device managed allocations
  i2c: pca-platform: add devicetree awareness
  i2c: pca-platform: switch to struct gpio_desc
  dt-bindings: add bindings for i2c-pca-platform
  i2c: cadance: fix ctrl/addr reg write order
  i2c: zx2967: add i2c controller driver for ZTE's zx2967 family
  dt: bindings: add documentation for zx2967 family i2c controller
  i2c: algo-bit: add support for I2C_M_STOP
  ...
2017-07-12 10:04:56 -07:00
Jarkko Nikula 6e38cf3b44 i2c: designware: Let slave adapter support be optional
Only certain system configurations may use the I2C slave mode so let the
support be optional. This allow reducing module size if needed:

   text    data     bss     dec     hex filename
  10328    1336      16   11680    2da0 drivers/i2c/busses/i2c-designware-core.ko
   7222    1136       8    8366    20ae drivers/i2c/busses/i2c-designware-core.ko

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Luis Oliveira <lolivei@synopsys.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-07-04 16:12:45 +02:00
Jarkko Nikula 21bf440ce1 i2c: designware: Make HW init functions static
Recent i2c-designware slave support patches use master or slave HW init
functions through the function pointer so we can declare them static.

While at it, rename i2c_dw_init() as i2c_dw_init_master().

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Luis Oliveira <lolivei@synopsys.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-07-04 16:11:02 +02:00
Colin Ian King 9809cb831c i2c: designware: fix spelling mistakes
Trivial fixes to spelling mistakes in dev_dbg message

"STAUTS" -> "STATUS"
"SLAVE_ACTTVITY" -> "SLAVE_ACTIVITY"

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-07-04 16:08:34 +02:00
Chris Packham 78e6c5abeb i2c: pca-platform: propagate error from i2c_pca_add_numbered_bus
Rather than returning -ENODEV if i2c_pca_add_numbered_bus() fails,
propagate the error to aid debugging.

Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-07-04 16:03:42 +02:00
Chris Packham 2ec4d8831b i2c: pca-platform: correctly set algo_data.reset_chip
When device tree support was added the setting of algo_data.reset_chip
was moved. There were two problems with this. The first being that
i2c_pca_pf_resetchip was only used if platform data was provided. The
second that it was unconditionally overridden with
i2c_pca_pf_dummyreset. Ensure that however the reset gpio is defined the
correct reset_chip function is used.

Fixes: commit 4cc7229daa ("i2c: pca-platform: switch to struct gpio_desc")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-07-04 16:02:20 +02:00
Hans de Goede 3a4991a986 i2c: acpi: Do not create i2c-clients for LNXVIDEO ACPI devices
ACPI video devices get tagged by the kernel with the custom LNXVIDEO
HID so that normal pnp-id matching can be used and are handled by the
acpi-video driver.

Sometimes the ACPI nodes describing these contain a SERIAL_TYPE_I2C ACPI
resource. Before this commit the presence of this resource would cause the
i2c-core to create a /sys/bus/i2c/devices/i2c-LNXVIDEO:00 device for this
with a modalias of: "i2c:LNXVIDEO:00".

There is no i2c driver for this custom HID, the acpi-video driver binds
directly to the ACPI device /sys/bus/acpi/devices/LNXVIDEO\:00 which has
a modalias of "acpi:LNXVIDEO:" .

Not only is the creation of an i2c-client for this undesirable, it is
actually causing problems. This weird pseudo-resource claims an i2c
speed of 100KHz and typically points to the i2c bus which is used by the
touchscreen controller. Some touchscreen controllers only work properly at
400KHz, at 100KHz they cause errors like these:

i2c_designware 80860F41:03: i2c_dw_handle_tx_abort: lost arbitration
i2c_designware 80860F41:03: i2c_dw_handle_tx_abort: lost arbitration
i2c_designware 80860F41:03: i2c_dw_handle_tx_abort: lost arbitration
i2c_designware 80860F41:03: i2c_dw_handle_tx_abort: lost arbitration
silead_ts i2c-MSSL1680:00: Registers clear error -11

This commit makes the i2c-core ignore LNXVIDEO compatible ACPI devices
which has 2 positive results:

1) The bogus i2c-client for these is no longer created.
2) i2c_acpi_lookup_speed now ignores the 100KHz speed from the pseudo
i2c-resouce and properly returns 400KHz as speed for the touchscreen
i2c bus, fixing the touchscreen not working on various devies.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-07-04 15:57:34 +02:00
Linus Torvalds f4dd029ee0 Char/Misc patches for 4.13-rc1
Here is the "big" char/misc driver patchset for 4.13-rc1.
 
 Lots of stuff in here, a large thunderbolt update, w1 driver header
 reorg, the new mux driver subsystem, google firmware driver updates, and
 a raft of other smaller things.  Full details in the shortlog.
 
 All of these have been in linux-next for a while with the only reported
 issue being a merge problem with this tree and the jc-docs tree in the
 w1 documentation area.  The fix should be obvious for what to do when it
 happens, if not, we can send a follow-up patch for it afterward.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWVpXKA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynLrQCdG9SxRjAbOd6pT9Fr2NAzpUG84YsAoLw+I3iO
 EMi60UXWqAFJbtVMS9Aj
 =yrSq
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc updates from Greg KH:
 "Here is the "big" char/misc driver patchset for 4.13-rc1.

  Lots of stuff in here, a large thunderbolt update, w1 driver header
  reorg, the new mux driver subsystem, google firmware driver updates,
  and a raft of other smaller things. Full details in the shortlog.

  All of these have been in linux-next for a while with the only
  reported issue being a merge problem with this tree and the jc-docs
  tree in the w1 documentation area"

* tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (147 commits)
  misc: apds990x: Use sysfs_match_string() helper
  mei: drop unreachable code in mei_start
  mei: validate the message header only in first fragment.
  DocBook: w1: Update W1 file locations and names in DocBook
  mux: adg792a: always require I2C support
  nvmem: rockchip-efuse: add support for rk322x-efuse
  nvmem: core: add locking to nvmem_find_cell
  nvmem: core: Call put_device() in nvmem_unregister()
  nvmem: core: fix leaks on registration errors
  nvmem: correct Broadcom OTP controller driver writes
  w1: Add subsystem kernel public interface
  drivers/fsi: Add module license to core driver
  drivers/fsi: Use asynchronous slave mode
  drivers/fsi: Add hub master support
  drivers/fsi: Add SCOM FSI client device driver
  drivers/fsi/gpio: Add tracepoints for GPIO master
  drivers/fsi: Add GPIO based FSI master
  drivers/fsi: Document FSI master sysfs files in ABI
  drivers/fsi: Add error handling for slave
  drivers/fsi: Add tracepoints for low-level operations
  ...
2017-07-03 20:55:59 -07:00
Luis Oliveira 5b6d721b26 i2c: designware: enable SLAVE in platform module
- Slave mode selected in platform module if the support is detected in
  the DT.

Signed-off-by: Luis Oliveira <lolivei@synopsys.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-27 23:37:07 +02:00
Luis Oliveira 9f3e065c54 i2c: designware: add SLAVE mode functions
- Changes in Kconfig to enable I2C_DESIGNWARE_SLAVE support
- Slave functions added to core library file
- Slave abort sources added to common source file
- New driver: i2c-designware-slave added
- Changes in the Makefile to compile the I2C_DESIGNWARE_SLAVE module
  when supported by the architecture.

All the SLAVE flow is added but it is not enabled via platform
driver.

Signed-off-by: Luis Oliveira <lolivei@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
[wsa: made a function static and one-lined a message]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-27 23:36:28 +02:00
Shawn Guo 86766a3e15 i2c: zx2967: drop COMPILE_TEST dependency
0-DAY kernel test reports the following build issue on IA64 architecture
with allmodconfig.

   drivers/i2c/busses/i2c-zx2967.c: In function 'zx2967_i2c_writesb':
>> drivers/i2c/busses/i2c-zx2967.c:87:2: error: implicit declaration of function 'writesb' [-Werror=implicit-function-declaration]
     writesb(i2c->reg_base + reg, data, len);
     ^~~~~~~
   drivers/i2c/busses/i2c-zx2967.c: In function 'zx2967_i2c_readsb':
>> drivers/i2c/busses/i2c-zx2967.c:93:2: error: implicit declaration of function 'readsb' [-Werror=implicit-function-declaration]
     readsb(i2c->reg_base + reg, data, len);
     ^~~~~~
   cc1: some warnings being treated as errors

It's caused by that writesb/readsb are unavailable on IA64 architecture.
Let's drop COMPILE_TEST dependency to avoid the build issue.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-27 23:21:01 +02:00
Wolfram Sang c3518a4ed8 i2c: zx2967: always use the same device when printing errors
Let's always use the platform device for dev_* and not sometimes the
adapter device as well. Also fix this checkpatch check:

CHECK: Macro argument 'i2c' may be better as '(i2c)' to avoid precedence issues

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-27 23:21:00 +02:00
Chris Packham df40f24775 i2c: pca-platform: use dev_warn/dev_info instead of printk
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-27 23:21:00 +02:00
Chris Packham fa70ca7c28 i2c: pca-platform: use device managed allocations
Switch to using the devm_ APIs and remove the now unnecessary error
handling and most of the device removal code.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
[wsa: adapted error handling I added in previous patch]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-27 21:50:21 +02:00
Chris Packham 0e8ce93bdc i2c: pca-platform: add devicetree awareness
Allow devices that use this driver to be registered via a
devicetree.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
[wsa: fixed leakage when registering GPIO failed]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-27 21:47:54 +02:00
Chris Packham 4cc7229daa i2c: pca-platform: switch to struct gpio_desc
Make use of struct gpio_desc which allows us to specify the active state
of the reset pin.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-27 21:37:33 +02:00
Matt Weber 8064c61698 i2c: cadance: fix ctrl/addr reg write order
The driver was clearing the hold bit in the control register before
writing to the address register which resulted in a stop condition
being generated rather than a repeated start.

This issue was only observed when a system was running much
slower than a normal processor would execute.  The IP data sheet
mentions a ordering of writing to the address register before
clearing the hold.

Fixes: df8eb5691c ("i2c: Add driver for Cadence I2C controller")
Signed-off-by: John Linn <john.linn@xilinx.com>
Signed-off-by: Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-23 20:56:21 +02:00
Baoyou Xie 9615a01f71 i2c: zx2967: add i2c controller driver for ZTE's zx2967 family
This patch adds i2c controller driver for ZTE's zx2967 family.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-23 20:52:22 +02:00
Jean Delvare 606fd2788b i2c: algo-bit: add support for I2C_M_STOP
Support for enforced STOPs will allow us to use SCCB compatible devices.

Based on a preliminary patch by Wolfram Sang.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-23 20:45:43 +02:00
Brendan Higgins f9eb91350b i2c: aspeed: added slave support for Aspeed I2C driver
Added slave support for Aspeed I2C controller. Supports fourteen busses
present in AST24XX and AST25XX BMC SoCs by Aspeed.

Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-23 20:39:38 +02:00
Brendan Higgins f327c686d3 i2c: aspeed: added driver for Aspeed I2C
Added initial master support for Aspeed I2C controller. Supports
fourteen busses present in AST24XX and AST25XX BMC SoCs by Aspeed.

Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-23 20:39:18 +02:00
Wolfram Sang b395ba2169 i2c: rcar: document HW incapabilities
Add recent findings (IGNORE_NAK) and document in a bit more detail why
the feature is not possible.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-23 20:30:46 +02:00
Michail Georgios Etairidis 6c782a5ea5 i2c: imx: Use correct function to write to register
The i2c-imx driver incorrectly uses readb()/writeb() to read and
write to the appropriate registers when performing a repeated start.
The appropriate imx_i2c_read_reg()/imx_i2c_write_reg() functions
should be used instead. Performing a repeated start results in
a kernel panic. The platform is imx.

Signed-off-by: Michail G Etairidis <m.etairidis@beck-ipc.com>
Fixes: ce1a78840f ("i2c: imx: add DMA support for freescale i2c driver")
Fixes: 054b62d9f2 ("i2c: imx: fix the i2c bus hang issue when do repeat restart")
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-22 10:52:02 +02:00
Arvind Yadav f64622167f i2c: emev2: Handle return value of clk_prepare_enable
clk_prepare_enable() can fail here and we must check its return value.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-19 22:18:55 +02:00
Luis Oliveira 04606ccc84 i2c: designware: introducing I2C_SLAVE definitions
- Definitions were added to core library
- A example was added to designware-core.txt Documentation that shows
  how the slave can be setup using DTS

SLAVE related definitions were added to the core of the controller.

Signed-off-by: Luis Oliveira <lolivei@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-19 18:26:24 +02:00
Luis Oliveira 90312351fd i2c: designware: MASTER mode as separated driver
- The functions related to I2C master mode of operation were transformed
  in a single driver.
- Common definitions were moved to i2c-designware-core.h
- The i2c-designware-core is now only a library file, the functions
  associated are in a source file called i2c-designware-common and
  are used by both i2c-designware-master and i2c-designware-slave.
- To decrease noise in namespace common i2c_dw_*() functions are
  now using ops to keep them private.
- Designware PCI driver had to be changed to match the previous ops
  functions implementation.

Almost all of the "core" source is now part of the "master" source. The
difference is the functions used by both modes and they are in the
"common" source file.

Signed-off-by: Luis Oliveira <lolivei@synopsys.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-19 18:24:59 +02:00
Luis Oliveira 89a1e1bd7b i2c: designware: refactoring of the i2c-designware
- Factor out all _master() part of code from i2c-designware-core
  and i2c-designware-platdrv to separate functions.
- Standardize all code related with MASTER mode.
- I have to take off DW_IC_INTR_TX_EMPTY from DW_IC_INTR_DEFAULT_MASK
  because it is master specific.

The purpose of this is to prepare the controller to have is I2C MASTER
flow in a separate driver. To do this first all the
functions/definitions related to the MASTER flow were identified.

Signed-off-by: Luis Oliveira <lolivei@synopsys.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-19 18:24:25 +02:00
Luis Oliveira e393f674c5 i2c: designware: Cleaning and comment style fixes.
The purpose of this commit is to fix some comments and styling in the
existing code due to the need of reuse this code. What is being made
here is:

- Sorted the headers files
- Corrected some comments style (capital letters, lowcase i2c)
- Reverse tree in the variables declaration
- Add/remove empty lines and tabs where needed
- Fix of misspelled word "endianness" and "transferred"
- Replaced the return variable "r" with the more standard "ret"

The value of this, besides the rules of coding style, is because I
will use this code after and it will make my future patch a lot bigger and
complicated to review. The work here won't bring any additional work to
backported fixes because is just style and reordering.

Signed-off-by: Luis Oliveira <lolivei@synopsys.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-19 18:23:59 +02:00
Arvind Yadav f27e7805ba i2c: at91: Fix compilation warning.
Replace '%d' by '%zu' to fix the following type of compilation warnings:

drivers/i2c/busses/i2c-at91.c:277:2: warning: format ‘%d’ expects argument of type ‘int’, but argument 5 has type ‘size_t’ [-Wformat=]
  dev_dbg(dev->dev, "wrote 0x%x, to go %d\n", *dev->buf, dev->buf_len);
  ^

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Tested-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-19 16:30:04 +02:00
Arvind Yadav 56a6cb8865 i2c: at91: Handle return value of clk_prepare_enable
clk_prepare_enable() can fail here and we must check its return value.
Also, add a missing clk_disable_unprepare().

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-19 16:28:58 +02:00
Wolfram Sang 5c8e3ab146 i2c: use proper name for the R-Car SoC
It is 'R-Car', not 'RCar'. No code or binding changes, only descriptive text.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-19 16:24:05 +02:00
George Cherian 227855b954 i2c: xlp9xx: Enable HWMON class probing for xlp9xx
Set I2C_CLASS_HWMON for xlp9xx to enable automatic probing of BMC
devices by the ipmi-ssif driver.

Signed-off-by: George Cherian <george.cherian@cavium.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-19 16:22:54 +02:00
Srinivas Pandruvada 09a1de04d5 i2c: i801: Add support for Intel Cannon Lake
Added SMBUS PCI Ids for SMBUS for Cannon Lake PCH.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[jarkko.nikula@linux.intel.com: Add entries to Documentation and Kconfig.
Cover Cannon Lake-H too]
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-19 16:17:41 +02:00
Arnd Bergmann 063345aede i2c: xgene-slimpro: include linux/io.h for memremap
The newly added support for the pcc mailbox fails to build
in some configurations:

drivers/i2c/busses/i2c-xgene-slimpro.c: In function 'xgene_slimpro_i2c_probe':
drivers/i2c/busses/i2c-xgene-slimpro.c:516:25: error: implicit declaration of function 'memremap'; did you mean 'memcmp'? [-Werror=implicit-function-declaration]
drivers/i2c/busses/i2c-xgene-slimpro.c:518:13: error: 'MEMREMAP_WB' undeclared (first use in this function)
drivers/i2c/busses/i2c-xgene-slimpro.c:518:13: note: each undeclared identifier is reported only once for each function it appears in

This includes the missing header file.

Fixes: df5da47fe7 ("i2c: xgene-slimpro: Add ACPI support by using PCC mailbox")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hoan Tran <hotran@apm.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-18 14:59:45 +02:00
Wolfram Sang d44005672d i2c: stub: fix build warning regression
Commit 6c42778780 ("i2c: stub: use pr_fmt") changed the DEBUG
handling and caused build warnings. Revert back to the original.

Fixes: 6c42778780 ("i2c: stub: use pr_fmt")
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-15 23:22:11 +02:00
Liwei Song 17e83549e1 i2c: ismt: fix wrong device address when unmap the data buffer
Fix the following kernel bug:

kernel BUG at drivers/iommu/intel-iommu.c:3260!
invalid opcode: 0000 [#5] PREEMPT SMP
Hardware name: Intel Corp. Harcuvar/Server, BIOS HAVLCRB0.X64.0013.D39.1608311820 08/31/2016
task: ffff880175389950 ti: ffff880176bec000 task.ti: ffff880176bec000
RIP: 0010:[<ffffffff8150a83b>]  [<ffffffff8150a83b>] intel_unmap+0x25b/0x260
RSP: 0018:ffff880176bef5e8  EFLAGS: 00010296
RAX: 0000000000000024 RBX: ffff8800773c7c88 RCX: 000000000000ce04
RDX: 0000000080000000 RSI: 0000000000000000 RDI: 0000000000000009
RBP: ffff880176bef638 R08: 0000000000000010 R09: 0000000000000004
R10: ffff880175389c78 R11: 0000000000000a4f R12: ffff8800773c7868
R13: 00000000ffffac88 R14: ffff8800773c7818 R15: 0000000000000001
FS:  00007fef21258700(0000) GS:ffff88017b5c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000066d6d8 CR3: 000000007118c000 CR4: 00000000003406e0
Stack:
 00000000ffffac88 ffffffff8199867f ffff880176bef5f8 ffff880100000030
 ffff880176bef668 ffff8800773c7c88 ffff880178288098 ffff8800772c0010
 ffff8800773c7818 0000000000000001 ffff880176bef648 ffffffff8150a86e
Call Trace:
 [<ffffffff8199867f>] ? printk+0x46/0x48
 [<ffffffff8150a86e>] intel_unmap_page+0xe/0x10
 [<ffffffffa039d99b>] ismt_access+0x27b/0x8fa [i2c_ismt]
 [<ffffffff81554420>] ? __pm_runtime_suspend+0xa0/0xa0
 [<ffffffff815544a0>] ? pm_suspend_timer_fn+0x80/0x80
 [<ffffffff81554420>] ? __pm_runtime_suspend+0xa0/0xa0
 [<ffffffff815544a0>] ? pm_suspend_timer_fn+0x80/0x80
 [<ffffffff8143dfd0>] ? pci_bus_read_dev_vendor_id+0xf0/0xf0
 [<ffffffff8172b36c>] i2c_smbus_xfer+0xec/0x4b0
 [<ffffffff810aa4d5>] ? vprintk_emit+0x345/0x530
 [<ffffffffa038936b>] i2cdev_ioctl_smbus+0x12b/0x240 [i2c_dev]
 [<ffffffff810aa829>] ? vprintk_default+0x29/0x40
 [<ffffffffa0389b33>] i2cdev_ioctl+0x63/0x1ec [i2c_dev]
 [<ffffffff811b04c8>] do_vfs_ioctl+0x328/0x5d0
 [<ffffffff8119d8ec>] ? vfs_write+0x11c/0x190
 [<ffffffff8109d449>] ? rt_up_read+0x19/0x20
 [<ffffffff811b07f1>] SyS_ioctl+0x81/0xa0
 [<ffffffff819a351b>] system_call_fastpath+0x16/0x6e

This happen When run "i2cdetect -y 0" detect SMBus iSMT adapter.

After finished I2C block read/write, when unmap the data buffer,
a wrong device address was pass to dma_unmap_single().

To fix this, give dma_unmap_single() the "dev" parameter, just like
what dma_map_single() does, then unmap can find the right devices.

Fixes: 13f35ac14c ("i2c: Adding support for Intel iSMT SMBus 2.0 host controller")
Signed-off-by: Liwei Song <liwei.song@windriver.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-15 16:07:03 +02:00
Wolfram Sang 916335036d i2c: rcar: use correct length when unmapping DMA
Because we need to transfer some bytes with PIO, the msg length is not
the length of the DMA buffer. Use the correct value which we used when
doing the mapping.

Fixes: 73e8b05283 ("i2c: rcar: add DMA support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-15 15:51:44 +02:00
Greg Kroah-Hartman 069a0f32c9 Merge 4.12-rc5 into char-misc-next
We want the char/misc driver fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-12 08:18:10 +02:00
Peter Rosin ac8498f0ce i2c: i2c-mux-gpmux: new driver
This is a general purpose i2c mux that uses a multiplexer controlled by
the multiplexer subsystem to do the muxing.

The user can select if the mux is to be mux-locked and parent-locked
as described in Documentation/i2c/i2c-topology.

Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03 19:29:26 +09:00
Michael Thalmeier f9831bfec7 i2c: mxs: change error printing to debug for mxs_i2c_pio_wait_xfer_end
Instead of printing errors after mxs_i2c_pio_wait_xfer_end returns with
an error code just print a debug message.

NAKs and timeouts can occur in this situation normally, so do not treat
them as errors.

Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-02 22:57:14 +02:00
Wolfram Sang 90b84c0574 i2c: sh_mobile: drop needless check for of_node
After removal of platform_data support, we can simplify OF handling.
of_match_device() evaluates to NULL if !CONFIG_OF or if there is no node
pointer for that device, so we can remove the check for the node ptr.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-02 22:52:51 +02:00
Wolfram Sang d2f31c49cf i2c: sh_mobile: remove platform_data
No platform currently upstream makes use of this platform_data anymore.
The ones that did are converted to DT meanwhile. So, remove it. The old
platforms likely don't have the 'clks_per_cnt' feature, otherwise it
would have been implemented by now. And in the unlikely case they need
to setup a different bus speed, we should rather go for a generic i2c
platform data just for that.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-02 22:50:13 +02:00
Wolfram Sang 6c42778780 i2c: stub: use pr_fmt
Instead of hard coding "i2c-stub:", let's use the pr_fmt mechanism to
achieve the same more easily. This makes it easier to stay consistent
when adding new messages. Also, remove an unneeded OOM message while we
are here.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-02 22:45:28 +02:00
Hoan Tran df5da47fe7 i2c: xgene-slimpro: Add ACPI support by using PCC mailbox
This patch adds ACPI support by using PCC mailbox communication
interface.

Signed-off-by: Hoan Tran <hotran@apm.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-02 22:27:25 +02:00
Hoan Tran d140bd42b2 i2c: xgene-slimpro: Use a single function to send command message
This patch refactors the code to use a single message function to
send command message.

Signed-off-by: Hoan Tran <hotran@apm.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-02 22:21:21 +02:00
Wolfram Sang 61e3d0f79d i2c: reformat core-base file header
Finally, apply modern comment rules to the file header. The old style
looked very non-Linuxish and challenged my eyes for some time now. I
also added my own copyright for the period of me being the maintainer.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-31 21:01:06 +02:00
Wolfram Sang 16210d0692 i2c: remove unneeded includes from core
They seem like cruft to me. I couldn't find any evidence that something
included from there is actually used.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-31 21:01:05 +02:00
Wolfram Sang 53f8f7c5cf i2c: break out ACPI support into separate file
Removes some ifdeffery. Also add the new file to the relevant
MAINTAINERS section.

Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-31 21:01:04 +02:00
Wolfram Sang 5bf4fa7dae i2c: break out OF support into separate file
Also removes some ifdeffery.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-31 21:01:04 +02:00
Wolfram Sang 22c78d1cce i2c: break out smbus support into separate file
Break out the exported SMBus functions and the emulation layer into a
separate file. This also involved splitting up the tracing header into
an I2C and an SMBus part.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-31 21:01:03 +02:00
Wolfram Sang e4991ecdc6 i2c: break out slave support into separate file
Also removes some ifdeffery.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-31 21:01:03 +02:00
Wolfram Sang 91ed53491f i2c: rename core source file to allow refactorization
The I2C core became quite huge and its monolithic structure makes
maintenance hard. So, prepare to break out some functionality into
separate files by renaming the source file. Note that we keep the
resulting object name constant to avoid regressions.

Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-31 21:01:03 +02:00
Jan Kiszka e2c824924c i2c: designware: Fix bogus sda_hold_time due to uninitialized vars
We need to initializes those variables to 0 for platforms that do not
provide ACPI parameters. Otherwise, we set sda_hold_time to random
values, breaking e.g. Galileo and IOT2000 boards.

Fixes: 9d64084330 ("i2c: designware: don't infer timings described by ACPI from clock rate")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-22 10:35:51 +02:00
Sebastian Reichel 5165da5923 i2c: i2c-tiny-usb: fix buffer not being DMA capable
Since v4.9 i2c-tiny-usb generates the below call trace
and longer works, since it can't communicate with the
USB device. The reason is, that since v4.9 the USB
stack checks, that the buffer it should transfer is DMA
capable. This was a requirement since v2.2 days, but it
usually worked nevertheless.

[   17.504959] ------------[ cut here ]------------
[   17.505488] WARNING: CPU: 0 PID: 93 at drivers/usb/core/hcd.c:1587 usb_hcd_map_urb_for_dma+0x37c/0x570
[   17.506545] transfer buffer not dma capable
[   17.507022] Modules linked in:
[   17.507370] CPU: 0 PID: 93 Comm: i2cdetect Not tainted 4.11.0-rc8+ #10
[   17.508103] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[   17.509039] Call Trace:
[   17.509320]  ? dump_stack+0x5c/0x78
[   17.509714]  ? __warn+0xbe/0xe0
[   17.510073]  ? warn_slowpath_fmt+0x5a/0x80
[   17.510532]  ? nommu_map_sg+0xb0/0xb0
[   17.510949]  ? usb_hcd_map_urb_for_dma+0x37c/0x570
[   17.511482]  ? usb_hcd_submit_urb+0x336/0xab0
[   17.511976]  ? wait_for_completion_timeout+0x12f/0x1a0
[   17.512549]  ? wait_for_completion_timeout+0x65/0x1a0
[   17.513125]  ? usb_start_wait_urb+0x65/0x160
[   17.513604]  ? usb_control_msg+0xdc/0x130
[   17.514061]  ? usb_xfer+0xa4/0x2a0
[   17.514445]  ? __i2c_transfer+0x108/0x3c0
[   17.514899]  ? i2c_transfer+0x57/0xb0
[   17.515310]  ? i2c_smbus_xfer_emulated+0x12f/0x590
[   17.515851]  ? _raw_spin_unlock_irqrestore+0x11/0x20
[   17.516408]  ? i2c_smbus_xfer+0x125/0x330
[   17.516876]  ? i2c_smbus_xfer+0x125/0x330
[   17.517329]  ? i2cdev_ioctl_smbus+0x1c1/0x2b0
[   17.517824]  ? i2cdev_ioctl+0x75/0x1c0
[   17.518248]  ? do_vfs_ioctl+0x9f/0x600
[   17.518671]  ? vfs_write+0x144/0x190
[   17.519078]  ? SyS_ioctl+0x74/0x80
[   17.519463]  ? entry_SYSCALL_64_fastpath+0x1e/0xad
[   17.519959] ---[ end trace d047c04982f5ac50 ]---

Cc: <stable@vger.kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Till Harbaum <till@harbaum.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-22 10:33:42 +02:00
Ard Biesheuvel 9d64084330 i2c: designware: don't infer timings described by ACPI from clock rate
Commit bd698d24b1 ("i2c: designware: Get selected speed mode
sda-hold-time via ACPI") updated the logic that reads the timing
parameters for various I2C bus rates from the DSDT, to only read
the timing parameters for the currently selected mode.

This causes a WARN_ON() splat on platforms that legally omit the clock
frequency from the ACPI description, because in the new situation, the
core I2C designware driver still accesses the fields in the driver
struct that we no longer populate, and proceeds to calculate them from
the clock frequency. Since the clock frequency is unspecified, the
driver complains loudly using a WARN_ON().

So revert back to the old situation, where the struct fields for all
timings are populated, but retain the new logic which chooses the SDA
hold time from the timing mode that is currently in use.

Fixes: bd698d24b1 ("i2c: designware: Get selected speed mode ...")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-19 14:36:24 +02:00
Tin Huynh 83345d51a4 i2c: xgene: Set ACPI_COMPANION_I2C
With ACPI, i2c-core requires ACPI companion to be set in order for it
to create slave device.
This patch sets the ACPI companion accordingly.

Signed-off-by: Tin Huynh <tnhuynh@apm.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-17 09:21:06 +02:00
Thomas Petazzoni 88ad60c23a i2c: mv64xxx: don't override deferred probing when getting irq
There is no reason to use platform_get_irq() for non-DT probing and
irq_of_parse_and_map() for DT probing. Indeed, platform_get_irq()
works fine for both.

In addition, using platform_get_irq() properly returns -EPROBE_DEFER
when the interrupt controller is not yet available, so instead of
inventing our own error code (-ENXIO), return the one provided by
platform_get_irq().

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-16 23:19:00 +02:00
Peter Rosin 9fce894d03 i2c: mux: only print failure message on error
As is, a failure message is printed unconditionally, which is confusing.
And noisy.

Fixes: 8d4d159f25 ("i2c: mux: provide more info on failure in i2c_mux_add_adapter")
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-05-15 18:49:11 +02:00
Peter Rosin a36d4637e4 i2c: mux: reg: rename label to indicate what it does
That maintains sanity if it is ever called from some other spot, and
also makes the label names coherent.

Signed-off-by: Peter Rosin <peda@axentia.se>
2017-05-15 18:49:10 +02:00
Peter Rosin 68118e0e73 i2c: mux: reg: put away the parent i2c adapter on probe failure
It is only prudent to let go of resources that are not used.

Fixes: b3fdd32799 ("i2c: mux: Add register-based mux i2c-mux-reg")
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-05-15 18:44:58 +02:00
Linus Torvalds 291b38a756 Annotation of module parameters that specify device settings
-----BEGIN PGP SIGNATURE-----
 
 iQIVAwUAWPiW6vSw1s6N8H32AQLOrw/+NTqGf7bjq+64YKS6NfR0XDgE+wNJltGO
 ck7zJW3NHIg76RNu8s0I9xg5aVmwizz3Z5DGROZquaolnezux4tQihZ3AFyxIzLc
 +Y3WHYagcML7yFfjl/WznCLRD5EW3yPln4lCvQO0nW/xICRYeRI057JaIbi2Dtek
 BhcXt3c4AjXDLdYJkgtHV3p2R2mt8hcdFdWqqx6s7JaIThZNRGNzxAgtbcB9k5IW
 HVG9ZEIL73VBYWHrYivzjHYF5rBnNCPt87eOwDQeTOSkhv8te+u9k+bH8vxZw1T0
 XUtDrLBndKiuVo2GUfLkkF8LItx3Q9eLCJYy0joaIliyPqTEsPx9KjQ+Af0cxS9s
 ZPCZ5SYf96stKmDeL5xaMfrAmeyVHJ4lc4JTOqdzbIT8blsOSfYO/03p0ALShSDv
 /RQLaKGlf8Bjoy8PwKFcXb4sIDufcd/U1Av/EMFXxOfgN/u2JUkGKq6EaIM5B68L
 fHPje+aR9VNELPmPjwNOWtmN4I79EH3EItQf7zv0KG+UeKhcHLx/EAcSJ3ZRKEkH
 Lathg7pPOEJGArPiVO79TZzBG01ADn1aiwv65XObMzNZ+54xI/mN/Y1DNF/kL5jU
 XzvNzEjFt8mwMIZGVNdAt4+pDyMfIZGZSyUkSRKFnaQZMIvQrfQIU9RLBYLX5eOx
 +/p0VkIwDpg=
 =lbS7
 -----END PGP SIGNATURE-----

Merge tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull hw lockdown support from David Howells:
 "Annotation of module parameters that configure hardware resources
  including ioports, iomem addresses, irq lines and dma channels.

  This allows a future patch to prohibit the use of such module
  parameters to prevent that hardware from being abused to gain access
  to the running kernel image as part of locking the kernel down under
  UEFI secure boot conditions.

  Annotations are made by changing:

        module_param(n, t, p)
        module_param_named(n, v, t, p)
        module_param_array(n, t, m, p)

  to:

        module_param_hw(n, t, hwtype, p)
        module_param_hw_named(n, v, t, hwtype, p)
        module_param_hw_array(n, t, hwtype, m, p)

  where the module parameter refers to a hardware setting

  hwtype specifies the type of the resource being configured. This can
  be one of:

        ioport          Module parameter configures an I/O port
        iomem           Module parameter configures an I/O mem address
        ioport_or_iomem Module parameter could be either (runtime set)
        irq             Module parameter configures an I/O port
        dma             Module parameter configures a DMA channel
        dma_addr        Module parameter configures a DMA buffer address
        other           Module parameter configures some other value

  Note that the hwtype is compile checked, but not currently stored (the
  lockdown code probably won't require it). It is, however, there for
  future use.

  A bonus is that the hwtype can also be used for grepping.

  The intention is for the kernel to ignore or reject attempts to set
  annotated module parameters if lockdown is enabled. This applies to
  options passed on the boot command line, passed to insmod/modprobe or
  direct twiddling in /sys/module/ parameter files.

  The module initialisation then needs to handle the parameter not being
  set, by (1) giving an error, (2) probing for a value or (3) using a
  reasonable default.

  What I can't do is just reject a module out of hand because it may
  take a hardware setting in the module parameters. Some important
  modules, some ipmi stuff for instance, both probe for hardware and
  allow hardware to be manually specified; if the driver is aborts with
  any error, you don't get any ipmi hardware.

  Further, trying to do this entirely in the module initialisation code
  doesn't protect against sysfs twiddling.

  [!] Note that in and of itself, this series of patches should have no
      effect on the the size of the kernel or code execution - that is
      left to a patch in the next series to effect. It does mark
      annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in
      an already existing field"

* tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits)
  Annotate hardware config module parameters in sound/pci/
  Annotate hardware config module parameters in sound/oss/
  Annotate hardware config module parameters in sound/isa/
  Annotate hardware config module parameters in sound/drivers/
  Annotate hardware config module parameters in fs/pstore/
  Annotate hardware config module parameters in drivers/watchdog/
  Annotate hardware config module parameters in drivers/video/
  Annotate hardware config module parameters in drivers/tty/
  Annotate hardware config module parameters in drivers/staging/vme/
  Annotate hardware config module parameters in drivers/staging/speakup/
  Annotate hardware config module parameters in drivers/staging/media/
  Annotate hardware config module parameters in drivers/scsi/
  Annotate hardware config module parameters in drivers/pcmcia/
  Annotate hardware config module parameters in drivers/pci/hotplug/
  Annotate hardware config module parameters in drivers/parport/
  Annotate hardware config module parameters in drivers/net/wireless/
  Annotate hardware config module parameters in drivers/net/wan/
  Annotate hardware config module parameters in drivers/net/irda/
  Annotate hardware config module parameters in drivers/net/hamradio/
  Annotate hardware config module parameters in drivers/net/ethernet/
  ...
2017-05-10 19:13:03 -07:00
Linus Torvalds dc9edaab90 More ACPI updates for v4.12-rc1
- Update the ACPICA code in the kernel to upstream revision
    20170303 which includes:
    * Minor fixes and improvements in the core code (Bob Moore,
      Seunghun Han).
    * Debugger fixes (Colin Ian King, Lv Zheng).
    * Compiler/disassembler improvements (Bob Moore, David Box,
      Lv Zheng).
    * Build-related update (Lv Zheng).
 
  - Add new device IDs and platform-related information to the
    ACPI drivers for Intel (LPSS) and AMD (APD) SoCs (Hanjun Guo,
    Hans de Goede).
 
  - Make it possible to quirk ACPI-enumerated devices as "always
    present" on platforms where they are incorrectly reported as not
    present by the AML and add the INT0002 device ID to the list of
    "always present" devices (Hans de Goede).
 
  - Fix the register information in the xpower PMIC driver and add
    comments to map the registers to symbols used by AML to it
    (Hans de Goede).
 
  - Move the code turning off unused ACPI power resources during
    system resume to a point after all devices have been resumed
    to avoid issues with power resources that do not behave as
    expected (Hans de Goede).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJZEkXjAAoJEILEb/54YlRxWQ4QAIymQKPRXS6g8/5qZ8w5YNY+
 gLHkEzANPW3JHTUwv2hxfPP4AWYnDwTSg5g3RVue0R+tj49ERNsDoaFXBJ8L3wlA
 bLr9VFXPtzX5yuFD1MGeDWeUqGwuTJztWcMAkzpRgbj+6ppjJForObM76XFB3Pmn
 t5XUs0Tjlahqhg59GCHkt+kGeL5BOayLvIQt17IxQiAzAi3SY4P/qcq6qG2hY7BX
 0PB/zodPfCQpbcReKMDGfQlhxSWgcoQiCoBmmx0YIQfTQzmvWUejek1GcSUfJu1C
 Hx/ndBiAWkJ7m77LMAyQT9FgRsp9GkDllYhXJ+rmAWFuqNrEpTFJjY6q3wXxMyMl
 T39BWPFfauatEmDYXXLWpUuFaxX+VJ5nNlUtHGDm3xP/NI4ARiAUowk6haFfR1nx
 YmBon4VPzG2cf6wnXKI2rdWIbkKLkDYLPpzBpvUxswkPNtEF2/272nPwo0nqfTms
 S3ddyRhYBnht1JgDPf/nAyUOK0jowxWlFEBsKvLUZ0faHuIhAS4FEO8DNxVnhP0b
 m1nlZFctJeRCcI11mva5Tob9w8w5Z7WslfoTLQ9eFBl6RJdmy05s8d/CQYI9hK15
 EmVIRRqJ+G4gNHdcV26+JKBWgrJv6WSmf32QBXDCT94C4iZrqxXmccvY7s2tZEJR
 7VEo/7Ck70xbNcvEOn3c
 =Ytsi
 -----END PGP SIGNATURE-----

Merge tag 'acpi-extra-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to upstream revision
  20170303 which adds a few minor fixes and improvements, update ACPI
  SoC drivers with new device IDs, platform-related information and
  similar, fix the register information in the xpower PMIC driver,
  introduce a concept of "always present" devices to the ACPI device
  enumeration code and use it to fix a problem with one platform, and
  fix a system resume issue related to power resources.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20170303
     which includes:
      * Minor fixes and improvements in the core code (Bob Moore,
        Seunghun Han).
      * Debugger fixes (Colin Ian King, Lv Zheng).
      * Compiler/disassembler improvements (Bob Moore, David Box, Lv
        Zheng).
      * Build-related update (Lv Zheng).

   - Add new device IDs and platform-related information to the ACPI
     drivers for Intel (LPSS) and AMD (APD) SoCs (Hanjun Guo, Hans de
     Goede).

   - Make it possible to quirk ACPI-enumerated devices as "always
     present" on platforms where they are incorrectly reported as not
     present by the AML and add the INT0002 device ID to the list of
     "always present" devices (Hans de Goede).

   - Fix the register information in the xpower PMIC driver and add
     comments to map the registers to symbols used by AML to it (Hans de
     Goede).

   - Move the code turning off unused ACPI power resources during system
     resume to a point after all devices have been resumed to avoid
     issues with power resources that do not behave as expected (Hans de
     Goede)"

* tag 'acpi-extra-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits)
  ACPI / power: Delay turning off unused power resources after suspend
  ACPI / PMIC: xpower: Fix power_table addresses
  ACPI / LPSS: Call pwm_add_table() for Bay Trail PWM device
  ACPICA: Update version to 20170303
  ACPICA: iasl: add ASL conversion tool
  ACPICA: Local cache support: Allow small cache objects
  ACPICA: Disassembler: Do not unconditionally remove temporary names
  ACPICA: iasl: Fix IORT SMMU GSI disassembling
  ACPICA: Cleanup AML opcode definitions, no functional change
  ACPICA: Debugger: Add interpreter blocking mark for single-step mode
  ACPICA: debugger: fix memory leak on Pathname
  ACPICA: Update for automatic repair code for objects returned by evaluate_object
  ACPICA: Namespace: fix operand cache leak
  ACPICA: Fix several incorrect invocations of ACPICA return macro
  ACPICA: Fix a module for excessive debug output
  ACPICA: Update some function headers, no funtional change
  ACPICA: Disassembler: Enhance resource descriptor detection
  i2c: designware: Add ACPI HID for Hisilicon Hip07/08 I2C controller
  ACPI / APD: Add clock frequency for Hisilicon Hip07/08 I2C controller
  ACPI / bus: Add INT0002 to list of always-present devices
  ...
2017-05-10 09:35:42 -07:00
Linus Torvalds 16a12fa9ae Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem updates from Dmitry Torokhov:

 - a big update from Mauro converting input documentation to ReST format

 - Synaptics PS/2 is now aware of SMBus companion devices, which means
   that we can now use native RMI4 protocol to handle touchpads, instead
   of relying on legacy PS/2 mode.

 - we removed support from BMA180 accelerometer from input devices as it
   is now handled properly by IIO

 - update to TSC2007 to corretcly report pressure

 - other miscellaneous driver fixes.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (152 commits)
  Input: ar1021_i2c - use BIT to check for a bit
  Input: twl4030-pwrbutton - use input_set_capability() helper
  Input: twl4030-pwrbutton - use correct device for irq request
  Input: ar1021_i2c - enable touch mode during open
  Input: add uinput documentation
  dt-bindings: input: add bindings document for ar1021_i2c driver
  dt-bindings: input: rotary-encoder: fix typo
  Input: xen-kbdfront - add module parameter for setting resolution
  ARM: pxa/raumfeld: fix compile error in rotary controller resources
  Input: xpad - do not suggest writing to Dominic
  Input: xpad - don't use literal blocks inside footnotes
  Input: xpad - note that usb/devices is now at /sys/kernel/debug/
  Input: docs - freshen up introduction
  Input: docs - split input docs into kernel- and user-facing
  Input: docs - note that MT-A protocol is obsolete
  Input: docs - update joystick documentation a bit
  Input: docs - remove disclaimer/GPL notice
  Input: fix "Game console" heading level in joystick documentation
  Input: rotary-encoder - remove references to platform data from docs
  Input: move documentation for Amiga CD32
  ...
2017-05-03 12:38:20 -07:00
Linus Torvalds 14b730723a Merge branch 'i2c/for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wilfram Sang:
 "I2C has the following updates for you:

   - an immutable cross-subsystem branch fixing PMIC access on Intel
     Baytrail

   - bigger driver updates to the designware, meson, exynos5 drivers

   - new i2c_acpi_new_device() function to create devices from ACPI

   - struct i2c_driver has now a flag 'disable_i2c_core_irq_mapping' to
     allow custom IRQ mapping in case the default does not fit

   - mux subsystem centralized error messages in its core

   - new driver for ltc4306 i2c mux

   - usual set of small updates"

* 'i2c/for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (44 commits)
  i2c: thunderx: Enable HWMON class probing
  i2c: rcar: clarify PM handling with more comments
  i2c: rcar: fix resume by always initializing registers before transfer
  i2c: tegra: fix spelling mistake: "contoller" -> "controller"
  i2c: exynos5: use core helper to get driver data
  i2c: exynos5: de-duplicate error logs on clock setup
  i2c: exynos5: simplify clock frequency handling
  i2c: exynos5: simplify timings calculation
  i2c: designware-baytrail: fix potential null pointer dereference on dev
  i2c: designware: Get selected speed mode sda-hold-time via ACPI
  [media] cx231xx: stop double error reporting
  i2c: core: Allow drivers to disable i2c-core irq mapping
  i2c: core: Add new i2c_acpi_new_device helper function
  i2c: core: Allow getting ACPI info by index
  i2c: img-scb: use setup_timer
  i2c: i2c-scmi: add a MS HID
  i2c: mux: ltc4306: LTC4306 and LTC4305 I2C multiplexer/switch
  dt-bindings: i2c: mux: ltc4306: Add dt-bindings for I2C multiplexer/switch
  i2c: mux: reg: stop double error reporting
  i2c: mux: pinctrl: stop double error reporting
  ...
2017-05-03 12:18:47 -07:00
Hanjun Guo 58dd8abfad i2c: designware: Add ACPI HID for Hisilicon Hip07/08 I2C controller
Add ACPI HID HISI02A1 and HISI02A2 for Hisilicon Hip07/08,
which have different clock frequency.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-04-27 00:09:19 +02:00
Jan Glauber 889ef45cd4 i2c: thunderx: Enable HWMON class probing
Set I2C_CLASS_HWMON to enable automatic probing of BMC devices
by the ipmi-ssif driver.

Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-04-21 18:05:22 +02:00
Wolfram Sang 63a761eef5 i2c: rcar: clarify PM handling with more comments
PM handling is correct but might be a bit subtle. Add some comments for
clarification.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-04-21 14:08:57 +02:00
Wolfram Sang ae481cc139 i2c: rcar: fix resume by always initializing registers before transfer
Resume failed because of uninitialized registers. Instead of adding a
resume callback, we simply initialize registers before every transfer.
This lightweight change is more robust and will keep us safe if we ever
need support for power domains or dynamic frequency changes.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-04-21 14:08:52 +02:00
Colin Ian King 8c91fd5ee6 i2c: tegra: fix spelling mistake: "contoller" -> "controller"
trivial fix to spelling mistake in MODULE_DESCRIPTION text

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-04-21 14:04:57 +02:00
Andrzej Hajda b371f866d9 i2c: exynos5: use core helper to get driver data
Driver core provides of_device_get_match_data which can be used
to get driver data instead of custom helper.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-04-21 14:02:41 +02:00
Andrzej Hajda 70c8c4e9bf i2c: exynos5: de-duplicate error logs on clock setup
In case of clock setup error it is enough to log it once.
Moreover patch simplifies clock setup routines.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-04-21 14:02:11 +02:00
Andrzej Hajda b9d5b31a0d i2c: exynos5: simplify clock frequency handling
There is no need to keep separate settings for high and fast speed clock.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-04-21 14:01:16 +02:00
Andrzej Hajda b917d4fd50 i2c: exynos5: simplify timings calculation
Instead of using cryptic loop direct calculation of timings
can be used.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-04-21 14:00:16 +02:00
David Howells c78babcc7d Annotate hardware config module parameters in drivers/i2c/
When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image.  Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.

To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify.  The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.

Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.

This patch annotates drivers in drivers/i2c/.

Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Jean Delvare <jdelvare@suse.de>
cc: linux-i2c@vger.kernel.org
2017-04-20 12:02:32 +01:00
Colin Ian King c7f82ea860 i2c: designware-baytrail: fix potential null pointer dereference on dev
The assignment to addr requires a call to get_sem_addr that dereferences
dev, however, this dereference occurs before a null pointer check on dev.
Move this assignment after the null check on dev to avoid a potential null
pointer dereference.

Detected by CoverityScan, CID#1419700 ("Dereference before null check")

Fixes: fd476fa22a ("i2c: designware-baytrail: Add support for cherrytrail")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-04-19 21:00:13 +02:00
chin.yew.tan@intel.com bd698d24b1 i2c: designware: Get selected speed mode sda-hold-time via ACPI
Sda-hold-time is an important parameter for tuning i2c to meet the
electrical specification especially for high speed. I2C with incorrect
sda-hold-time may cause lost arbitration error. Instead of loading all
speed mode settings, only selected speed mode settings are loaded.

Signed-off-by: Tan Chin Yew <chin.yew.tan@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-04-19 20:54:21 +02:00
Wolfram Sang c99a30d8c4 Merge branch 'i2c/for-INT33FE' into i2c/for-4.12
Pull in the immutable branch with I2C ACPI core extensions to support
the INT33FE driver.
2017-04-16 22:03:54 +02:00
Hans de Goede d1d84bb953 i2c: core: Allow drivers to disable i2c-core irq mapping
By default the i2c-core will try to get an irq with index 0 on ACPI / of
instantiated devices. This is troublesome on some ACPI systems where the
irq info at index 0 in the CRS table may contain nonsense and/or point
to an irqchip for which there is no Linux driver.

If this happens then before this commit the driver's probe method would
never get called because i2c_device_probe will try to get an irq by
calling acpi_dev_gpio_irq_get which will always return -EPROBE in this
case, as it waits for a matching irqchip driver to load. Thus causing
the driver to not get a chance to bind.

This commit adds a new disable_i2c_core_irq_mapping flag to struct
i2c_driver which a driver can set to tell the core to skip irq mapping.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-04-16 22:02:25 +02:00
Hans de Goede 605f8fc224 i2c: core: Add new i2c_acpi_new_device helper function
By default the i2c subsys creates an i2c-client for the first I2cSerialBus
resource of an acpi_device, but some acpi_devices have multiple
I2cSerialBus resources and we may want to instantiate i2c-clients for
the others.

This commit adds a new i2c_acpi_new_device function which can be used to
create an i2c-client for any I2cSerialBus resource of an acpi_device.

Note that the other resources may even be on a different i2c bus, so just
retrieving the client address is not enough.

Here is an example DSDT excerpt from such a device:

Device (WIDR)
{
    Name (_HID, "INT33FE" /* XPOWER Battery Device */)
    Name (_CID, "INT33FE" /* XPOWER Battery Device */)
    Name (_DDN, "WC PMIC Battery Device")
<snip>
    Name (RBUF, ResourceTemplate ()
    {
        I2cSerialBusV2 (0x005E, ControllerInitiated, 0x000186A0,
            AddressingMode7Bit, "\\_SB.PCI0.I2C7",
            0x00, ResourceConsumer, , Exclusive,
            )
        I2cSerialBusV2 (0x0036, ControllerInitiated, 0x000186A0,
            AddressingMode7Bit, "\\_SB.PCI0.I2C1",
            0x00, ResourceConsumer, , Exclusive,
            )
        I2cSerialBusV2 (0x0022, ControllerInitiated, 0x00061A80,
            AddressingMode7Bit, "\\_SB.PCI0.I2C1",
            0x00, ResourceConsumer, , Exclusive,
            )
        I2cSerialBusV2 (0x0054, ControllerInitiated, 0x00061A80,
            AddressingMode7Bit, "\\_SB.PCI0.I2C1",
            0x00, ResourceConsumer, , Exclusive,
            )
        GpioInt (Level, ActiveLow, Exclusive, PullNone, 0x0000,
            "\\_SB.PCI0.I2C7.PMI5", 0x00, ResourceConsumer, ,
            )
            {   // Pin list
        0x0012
            }
        GpioInt (Edge, ActiveLow, ExclusiveAndWake, PullNone, 0x0000,
            "\\_SB.GPO1", 0x00, ResourceConsumer, ,
            )
            {   // Pin list
        0x0005
            }
        GpioInt (Level, ActiveLow, Exclusive, PullNone, 0x0000,
            "\\_SB.PCI0.I2C7.PMI5", 0x00, ResourceConsumer, ,
            )
            {   // Pin list
        0x0013
            }
    })
    Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
    {
        Return (RBUF) /* \_SB_.PCI0.I2C7.WIDR.RBUF */
    }
<snip>
}

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-04-16 22:02:02 +02:00
Hans de Goede 417f784379 i2c: core: Allow getting ACPI info by index
Modify struct i2c_acpi_lookup and i2c_acpi_fill_info() to allow
using them to get the info from a certain index in the ACPI-resource
list rather then taking the first I2cSerialBus resource.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-04-16 22:01:35 +02:00
Geliang Tang 879bce2285 i2c: img-scb: use setup_timer
Use setup_timer() instead of init_timer() to simplify the code.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-04-16 21:51:30 +02:00
Edgar Cherkasov e058e7a4bc i2c: i2c-scmi: add a MS HID
Description of the problem:
 - i2c-scmi driver contains only two identifiers "SMBUS01" and "SMBUSIBM";
 - the fist HID (SMBUS01) is clearly defined in "SMBus Control Method
   Interface Specification, version 1.0": "Each device must specify
   'SMBUS01' as its _HID and use a unique _UID value";
 - unfortunately, BIOS vendors (like AMI) seem to ignore this requirement
   and implement "SMB0001" HID instead of "SMBUS01";
 - I speculate that they do this because only "SMB0001" is hard coded in
   Windows SMBus driver produced by Microsoft.

This leads to following situation:
 - SMBus works out of box in Windows but not in Linux;
 - board vendors are forced to add correct "SMBUS01" HID to BIOS to make
   SMBus work in Linux. Moreover the same board vendors complain that
   tools (3-rd party ASL compiler) do not like the "SMBUS01" identifier
   and produce errors.  So they need to constantly patch the compiler for
   each new version of BIOS.

As it is very unlikely that BIOS vendors implement a correct HID in
future, I would propose to consider whether it is possible to work around
the problem by adding MS HID to the Linux i2c-scmi driver.

v2: move the definition of the new HID to the driver itself.

Signed-off-by: Edgar Cherkasov <echerkasov@dev.rtsoft.ru>
Signed-off-by: Michael Brunner <Michael.Brunner@kontron.com>
Acked-by: Viktor Krasnov <vkrasnov@dev.rtsoft.ru>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-04-16 21:48:06 +02:00
Wolfram Sang 69e620f866 Merge branch 'i2c-mux/for-next' of https://github.com/peda-r/i2c-mux into i2c/for-4.12
Pull in changes from the i2c-mux subsubsystem:

"Here are a new LTC4306/5 driver, a fix needed by the RT kernel and some
error message cleanup."
2017-04-16 21:44:37 +02:00
Michael Hennerich dbed8a803b i2c: mux: ltc4306: LTC4306 and LTC4305 I2C multiplexer/switch
This patch adds support for the Analog Devices / Linear Technology
LTC4306 and LTC4305 4/2 Channel I2C Bus Multiplexer/Switches.
The LTC4306 optionally provides two general purpose input/output pins
(GPIOs) that can be configured as logic inputs, opendrain outputs or
push-pull outputs via the generic GPIOLIB framework.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-04-12 17:10:31 +02:00
Dave Airlie b769fefb68 Linux 4.11-rc6
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJY6mY1AAoJEHm+PkMAQRiGB14IAImsH28JPjxJVDasMIRPBxVc
 euPPlZgoBieu7sNt+kEsEqdkXuu0MLk6gln0IGxWLeoB2S+u3Tz5LMa2YArVqV9Z
 tWzOnI9auE73P2Pz/tUMOdyMs5tO0PolQxX3uljbULBozOHjHRh13fsXchX2yQvl
 mFeFCDqpPV0KhWRH/ciA8uIHdvYPhMpkKgRtmR8jXL0yzqLp6+2J+Bs8nHG4NNng
 HMVxZPC8jOE/TgWq6k/GmXgxh3H/AideFdHFbLKYnIFJW41ZGOI8a262zq3NmjPd
 lywpVU7O7RMhSITY5PnuR3LpNV8ftw1hz2y6t35unyFK1P02adOSj5GJ3hGdhaQ=
 =Xz5O
 -----END PGP SIGNATURE-----

Backmerge tag 'v4.11-rc6' into drm-next

Linux 4.11-rc6

drm-misc needs 4.11-rc5, may as well fix conflicts with rc6.
2017-04-11 07:40:42 +10:00
Dmitry Torokhov 165fe9c9cd Merge branch 'ib/4.11-rc3-i2c-irq-resources' into next
Bring in changes to i2c to better manage device properties and to allow
specifying client interrupt through a resource structure.
2017-04-03 12:02:31 -07:00
Peter Rosin f089236114 i2c: mux: reg: stop double error reporting
i2c_mux_add_adapter already logs a message on failure.

Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-04-03 14:07:34 +02:00
Peter Rosin c99a23e55f i2c: mux: pinctrl: stop double error reporting
i2c_mux_add_adapter already logs a message on failure.

Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-04-03 14:07:34 +02:00
Peter Rosin 0756ac3235 i2c: mux: pca954x: stop double error reporting
i2c_mux_add_adapter already logs a message on failure.

Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-04-03 14:07:33 +02:00
Peter Rosin 664d9bbada i2c: mux: pca9541: stop double error reporting
i2c_mux_add_adapter already logs a message on failure.

Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-04-03 14:07:33 +02:00
Peter Rosin 1b00900fa0 i2c: mux: gpio: stop double error reporting
i2c_mux_add_adapter already logs a message on failure.

Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-04-03 14:07:32 +02:00
Peter Rosin 1144d13eaa i2c: arb: gpio-challenge: stop double error reporting
i2c_mux_add_adapter already logs a message on failure.

Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-04-03 14:07:32 +02:00
Peter Rosin 8d4d159f25 i2c: mux: provide more info on failure in i2c_mux_add_adapter
No callers then need to report any further info, thus reducing both the
amount of code and the log noise.

Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-04-03 14:07:31 +02:00
Dmitry Torokhov 4124c4eba4 i2c: allow attaching IRQ resources to i2c_board_info
Simple integer for interrupt number is not expressive enough, as it does
not convey interrupt trigger type that should be used. Let's allow
attaching array of resources to the board info and have i2c core parse
first IRQ resource and set up interrupt trigger as needed.

Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-01 09:36:19 -07:00
Dmitry Torokhov 0daaf99d84 i2c: copy device properties when using i2c_register_board_info()
This will allow marking device property lists as __initdata, the same as
board info structures themselves.

Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-01 09:36:12 -07:00
Dmitry Torokhov 00a06c22e9 i2c: export i2c_client_type structure
i2c bus has 2 different types of device belonging to the same bus and
bus notifiers use device type to distinguish between adapters and clients.
Previously we only had i2c_adapter_type exported, which made code wanting
to work with i2c_client devices test for type not equal to adapter type.
This unfortunately is not safe if we ever add another type to the bus,
so let's export i2c_client_type as well.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-01 09:35:08 -07:00
Heiner Kallweit cda816d163 i2c: meson: improve and simplify interrupt handler
The preceding changes in this patch series now allow to simplify
the interrupt handler significantly.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-30 17:31:29 +02:00
Heiner Kallweit 3911764cfb i2c: meson: remove meson_i2c_write_tokens
meson_i2c_write_tokens is always called directly after
meson_i2c_prepare_xfer (and only then). So we can simplify the code by
removing meson_i2c_write_tokens and moving the two statements of
meson_i2c_write_tokens to the end of meson_i2c_prepare_xfer.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-30 17:31:22 +02:00
Heiner Kallweit 3f205d7b47 i2c: meson: don't create separate token chain just for the stop command
We can directly add the stop token to the token chain including the
last transfer chunk. This is more efficient than creating a separate
token chain just for the stop command.
And it allows us to get rid of state STATE_STOP completely.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-30 17:31:15 +02:00
Heiner Kallweit 38ed55ca9e i2c: meson: improve interrupt handler and detect spurious interrupts
If state is STATE_IDLE no interrupt should occur. Return IRQ_NONE
if such a spurious interrupt is detected.
Not having to take care of STATE_IDLE later in the interrupt handler
allows to further simplify the interrupt handler in subsequent
patches of this series.

In addition move resetting REG_CTRL_START bit to the start of the
interrupt handler to ensure that the start bit is always reset.
Currently the start bit is not reset for STATE_STOP because
i2c->state is set to STATE_IDLE.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-30 17:31:08 +02:00
Heiner Kallweit e4d6bc380c i2c: meson: remove variable count from meson_i2c_xfer
Variable count has always the same value as i, so we don't need it.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-30 17:31:01 +02:00
Heiner Kallweit 47bb8f71ca i2c: meson: use full 12 bits for clock divider
The clock divider has 12 bits, splitted into a 10 bit field and a
2 bit field. The extra 2 bits aren't used currently.

Change this to use the full 12 bits and warn if the requested
frequency is too low.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-30 17:30:54 +02:00
Heiner Kallweit 39b2ca6853 i2c: meson: use i2c core for DT clock-frequency parsing
We don't have to parse the DT manually to retrieve the bus frequency
and we don't have to maintain an own default for the bus frequency.
Let the i2c core do this for us.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-30 17:30:47 +02:00
Heiner Kallweit 09af1c2fa4 i2c: meson: set clock divider in probe instead of setting it for each transfer
The bus frequency is fixed to what is set DT, therefore we can set
the clock divider in probe already and we don't have to set it for
each transfer.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-30 17:30:39 +02:00
Heiner Kallweit a55cc70af6 i2c: meson: remove member irq from struct meson_i2c
Member irq can be replaced with a local variable in probe
because it's nowhere else accessed.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-30 17:30:32 +02:00
Heiner Kallweit 8edf52a1e9 i2c: meson: use min instead of min_t where min_t isn't needed
Use min instead of min_t where min_t isn't needed.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-30 17:30:25 +02:00
Mike Looijmans dbe4d69d25 i2c: mux: pca954x: Add missing pca9546 definition to chip_desc
The spec for the pca9546 was missing. This chip is the same as the pca9545
except that it lacks interrupt lines. While the i2c_device_id table mapped
the pca9546 to the pca9545 definition the compatible table did not.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-03-24 12:22:18 +01:00
Andy Shevchenko e88162f9da Revert "i2c: mux: pca954x: Add ACPI support for pca954x"
In ACPI world any ID should be carefully chosen and registered
officially. The commit bbf9d262a1 seems did a wrong assumption because
PCA is the registered PNP ID for "PHILIPS BU ADD ON CARD". I'm pretty
sure this prefix has nothing to do with the driver in question.

Moreover, newer ACPI specification has a support of _DSD method and
special device IDs to allow drivers be enumerated via compatible string.
The slight change to support this kind of enumeration will be added in
sequential patch against pca954x.c.

Revert the commit bbf9d262a1 for good.

Cc: Tin Huynh <tnhuynh@apm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-03-23 22:12:22 +01:00
Jan Glauber 346e400cfc i2c: thunderx: ACPI support for clock settings
Add support for reading the system clock and the TWSI clock
frequency from ACPI DSDT.

TWSI clock was already covered by using device_property_read().

Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-23 21:49:27 +01:00
Jayachandran C 4165bd4b91 i2c: xlp9xx: update for ARCH_THUNDER2
ARCH_VULCAN arm64 platform (for Broadcom Vulcan ARM64 processors) has
been discontinued. Cavium's ThunderX2 CN99XX (ARCH_THUNDER2) will be
the next revision of the platform.

Update compile dependencies and ACPI ID to reflect this change. There
is not need to retain ARCH_VULCAN since the Vulcan processor was never
in production and the config option will be removed soon.

Signed-off-by: Jayachandran C <jnair@caviumnetworks.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-23 21:44:21 +01:00
Philipp Zabel 074363a5a0 i2c: mv64xxx: simplify optional reset handling
As of commit bb475230b8 ("reset: make optional functions really
optional"), the reset framework API calls use NULL pointers to describe
optional, non-present reset controls.

This allows to return errors from devm_reset_control_get_optional and to
call reset_control_(de)assert unconditionally.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-23 21:40:29 +01:00
Jon Hunter 1ae5214a22 i2c: tegra-bpmp: Enable Tegra BPMP I2C adapter
Enable the Tegra BPMP I2C adapter by default if the Tegra BPMP itself
is enabled. This adapter is used as the I2C interface for the PMIC on
the Tegra186 Jetson-TX2 platform.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-23 21:08:46 +01:00
Dave Airlie 65d1086c44 Linux 4.11-rc3
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJYzznuAAoJEHm+PkMAQRiGAzMIAJDBo5otTMMLhg8eKj8Cnab4
 2NyaoWDN6mtU427rzEKEfZlTtp3gIBVdFex5x442weIdw6BgRQW0dvF/uwEn08yI
 9Wx7VJmIUyH9M8VmhDtkUTFrhwUGr29qb3JhENMd7tv/CiJaehGRHCT3xqo5BDdu
 xiyPcwSkwP/NH24TS91G87gV6r0I0oKLSAxu+KifEFESrb8gaZaduslzpEj3m/Ds
 o9EPpfzaiGAdW5EdNfPtviYbBk7ZOXwtxdMV+zlvsLcaqtYnFEsJZd2WyZL0zGML
 VXBVxaYtlyTeA7Mt8YYUL+rDHELSOtCeN5zLfxUvYt+Yc0Y6LFBLDOE5h8b3eCw=
 =uKUo
 -----END PGP SIGNATURE-----

BackMerge tag 'v4.11-rc3' into drm-next

Linux 4.11-rc3 as requested by Daniel
2017-03-23 12:05:13 +10:00
Hans de Goede a3d411fb38 i2c: designware: Disable pm for PMIC i2c-bus even if there is no _SEM method
Cherrytrail devices use the dw i2c-bus with uid 7 to access their PMIC.
Even if the i2c-bus to the PMIC is not shared with the SoC's P-Unit
and i2c-designware-baytrail.c thus does not set the pm_disabled flag,
we still need to disable pm so that ACPI PMIC opregions can access the
PMIC during late-suspend and early-resume.

This fixes errors like these blocking suspend:

  i2c_designware 808622C1:06: timeout waiting for bus ready
  ACPI Exception: AE_ERROR, Returned by Handler for [UserDefinedRegion]
  acpi 80860F14:02: Failed to change power state to D3hot
  PM: late suspend of devices failed

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-22 09:53:48 +01:00
Hans de Goede 41c80b8a63 i2c: designware: Never suspend i2c-busses used for accessing the system PMIC
Currently we are already setting a pm_runtime_disabled flag and disabling
runtime-pm for i2c-busses used for accessing the system PMIC on x86.
But this is not enough, there are ACPI opregions which may want to access
the PMIC during late-suspend and early-resume, so we need to completely
disable pm to be safe.

This commit renames the flag from pm_runtime_disabled to pm_disabled and
adds the following new behavior if the flag is set:

1) Call dev_pm_syscore_device(dev, true) which disables normal suspend /
   resume and remove the pm_runtime_disabled check from dw_i2c_plat_resume
   since that will now never get called. This fixes suspend_late handlers
   which use ACPI PMIC opregions causing errors like these:

  PM: Suspending system (freeze)
  PM: suspend of devices complete after 1127.751 msecs
  i2c_designware 808622C1:06: timeout waiting for bus ready
  ACPI Exception: AE_ERROR, Returned by Handler for [UserDefinedRegion]
  acpi 80860F14:02: Failed to change power state to D3hot
  PM: late suspend of devices failed

2) Set IRQF_NO_SUSPEND irq flag. This fixes resume_early handlers which
   handlers which use ACPI PMIC opregions causing errors like these:

  PM: resume from suspend-to-idle
  i2c_designware 808622C1:06: controller timed out
  ACPI Exception: AE_ERROR, Returned by Handler for [UserDefinedRegion]

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-22 09:53:24 +01:00
Oliver Neukum 78c43af2c1 i2c-designware: increase timeout of semaphore transfer
Our testing shows the semaphore failing to be transferred on CherryTrail
in about 0.5% of all cases. The existing timeout needs to be lengthened
to accommodate the worst cases.

V2: Rebased on https://cgit.freedesktop.org/drm-intel/commit/?h=topic/designware-baytrail

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-22 09:45:00 +01:00
Wolfram Sang a528fab6cc Merge tag 'topic/designware-baytrail-2017-03-02' of git://anongit.freedesktop.org/git/drm-intel into i2c/for-next
Pull immutable branch as a common base for further development:

"Baytrail PMIC vs. PMU race fixes from Hans de Goede

This time the right version (v4), with the compile fix."
2017-03-22 09:32:44 +01:00
Julia Cartwright 743cc37561 i2c: mux: pca954x: make use of raw_spinlock variants
The pca954x i2c mux driver currently implements an irq_chip for handling
interrupts; due to how irq_chip handling is done, it's necessary for the
irq_chip methods to be invoked from hardirq context, even on a a
real-time kernel.  Because the spinlock_t type becomes a "sleeping"
spinlock w/ RT kernels, it is not suitable to be used with irq_chips.

A quick audit of the operations under the lock reveal that they do only
minimal, bounded work, and are therefore safe to do under a raw spinlock.

Signed-off-by: Julia Cartwright <julia@ni.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-03-15 23:22:43 +01:00
Daniel Vetter f103560cf7 Merge tag 'topic/designware-baytrail-2017-03-02' of git://anongit.freedesktop.org/git/drm-intel into drm-intel-next-queued
Baytrail PMIC vs. PMU race fixes from Hans de Goede

This time the right version (v4), with the compile fix.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2017-03-13 09:26:06 +01:00
Wolfram Sang 806dbb20ef Revert "i2c: copy device properties when using i2c_register_board_info()"
This reverts commit b0c1e95ab4. It
contains a flaw and the next version has more features added which makes
me want to move it to the next cycle.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-09 16:41:48 +01:00
Wolfram Sang e61dfc836b Merge branch 'i2c-mux/for-current' of https://github.com/peda-r/i2c-mux into i2c/for-current 2017-03-09 16:34:41 +01:00
Wolfram Sang 8ce0928e68 Revert "i2c: add missing of_node_put in i2c_mux_del_adapters"
This reverts commit 02dbfa5e55. I grabbed
the wrong version from the list and will pull the proper one from Peter
Rosin's mux tree.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-09 16:33:50 +01:00
Javier Martinez Canillas 9ad2247442 i2c: exynos5: Avoid transaction timeouts due TRANSFER_DONE_AUTO not set
After commit 7999eecb7e ("i2c: exynos5: fix arbitration lost handling"),
some I2C transactions are failing because the TRANSFER_DONE_AUTO field is
not set in the I2C_TRANS_STATUS register so the i2c->status value is left
to -EINVAL causing the i2c->msg_complete completion to never be signaled.

For example, when reading the time of an I2C rtc on an Exynos5800 machine:

$ cat /sys/class/rtc/rtc0/time
[   25.924594] exynos5-hsi2c 12e10000.i2c: rx timeout
[   65.028365] max77686-rtc max77802-rtc: Fail to read time reg(-22)
cat: /sys/class/rtc/rtc0/time: Invalid argument

The Exynos5422 manual states clearly that most I2C_TRANS_STATUS reg bits
(including TRANSFER_DONE_AUTO) are cleared after the register is read. So
reading has side effects and should only be done if HSI2C_INT_I2C was set.

Fixes: 7999eecb7e ("i2c: exynos5: fix arbitration lost handling")
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-09 15:50:16 +01:00
Zhangfei Gao ab809fd81f i2c: designware: add reset interface
Some platforms like hi3660 need do reset first to allow accessing registers

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ramiro Oliveira <ramiro.oliveira@synopsys.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-08 18:15:18 +01:00
Heiner Kallweit 3b0277f198 i2c: meson: fix wrong variable usage in meson_i2c_put_data
Most likely a copy & paste error.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Fixes: 30021e3707 ("i2c: add support for Amlogic Meson I2C controller")
2017-03-08 18:06:47 +01:00
Dmitry Torokhov b0c1e95ab4 i2c: copy device properties when using i2c_register_board_info()
This will allow marking device property lists as __initdata, the same as
board info structures themselves.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-08 18:05:09 +01:00
Wolfram Sang 1945250d97 i2c: m65xx: drop superfluous quirk structure
All length fields in Linux I2C are u16, so a HW length limitation of 16
bit lengths is not a limitation. Remove the quirk structure.

Tested-by: Jun Gao <jun.gao@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-08 18:03:41 +01:00
Jaedon Shin 2de3ec4f1d i2c: brcmstb: Fix START and STOP conditions
The BSC data buffers to send and receive data are each of size 32 bytes
or 8 bytes 'xfersz' depending on SoC. The problem observed for all the
combined message transfer was if length of data transfer was a multiple
of 'xfersz' a repeated START was being transmitted by BSC driver. Fixed
this by appropriately setting START/STOP conditions for such transfers.

Fixes: dd1aa2524b ("i2c: brcmstb: Add Broadcom settop SoC i2c controller driver")
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Acked-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-08 18:00:49 +01:00
Qi Hou 02dbfa5e55 i2c: add missing of_node_put in i2c_mux_del_adapters
Refcount of of_node is increased with of_node_get() in i2c_mux_add_adapter().
It must be decreased with of_node_put() in i2c_mux_del_adapters().

Signe-off-by: Qi Hou <qi.hou@windriver.com>
Reviewed-by: Zhang Xiao <xiao.zhang@windriver.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-08 17:59:12 +01:00
Chris Brandt 2501c1bb05 i2c: riic: fix restart condition
While modifying the driver to use the STOP interrupt, the completion of the
intermediate transfers need to wake the driver back up in order to initiate
the next transfer (restart condition). Otherwise you get never ending
interrupts and only the first transfer sent.

Fixes: 71ccea095e ("i2c: riic: correctly finish transfers")
Reported-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-08 17:54:59 +01:00
Qi Hou 2e1e4949f9 i2c: add missing of_node_put in i2c_mux_del_adapters
Refcount of of_node is increased with of_node_get() in i2c_mux_add_adapter().
It must be decreased with of_node_put() in i2c_mux_del_adapters().

Cc: stable@vger.kernel.org
Signed-off-by: Qi Hou <qi.hou@windriver.com>
Reviewed-by: Zhang Xiao <xiao.zhang@windriver.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-03-03 10:50:28 +01:00
Hans de Goede d93a6ed370 i2c: designware-baytrail: Call pmic_bus_access_notifier_chain
Call the iosf_mbi pmic_bus_access_notifier_chain on bus acquire / release.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=155241
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: tagorereddy <tagore.chandan@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210102802.20898-11-hdegoede@redhat.com
2017-03-02 15:46:36 +01:00
Hans de Goede 5b2cacceb7 i2c: designware-baytrail: Acquire P-Unit access on bus acquire
Acquire P-Unit access to stop others from accessing the P-Unit while the
PMIC i2c bus is in use. This is necessary because accessing the P-Unit
from the kernel may result in the P-Unit trying to access the PMIC i2c
bus, which results in a hang when it happens while we own the PMIC i2c
bus semaphore.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=155241
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: tagorereddy <tagore.chandan@gmail.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210102802.20898-10-hdegoede@redhat.com
2017-03-02 15:46:35 +01:00
Hans de Goede fd476fa22a i2c: designware-baytrail: Add support for cherrytrail
The cherrytrail punit has the pmic i2c bus access semaphore at a
different register address.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210102802.20898-9-hdegoede@redhat.com
2017-03-02 15:46:34 +01:00
Hans de Goede 519e23a7f5 i2c: designware-baytrail: Fix race when resetting the semaphore
Use iosf_mbi_modify instead of iosf_mbi_read + iosf_mbi_write so that
we keep the iosf_mbi_lock locked during the read-modify-write done to
reset the semaphore.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210102802.20898-8-hdegoede@redhat.com
2017-03-02 15:46:34 +01:00
Hans de Goede 086cb4afef i2c: designware-baytrail: Disallow the CPU to enter C6 or C7 while holding the punit semaphore
On my cherrytrail tablet with axp288 pmic, just doing a bunch of repeated
reads from the pmic, e.g. "i2cdump -y 14 0x34" would lookup the tablet in
1 - 3 runs guaranteed.

This seems to be causes by the cpu trying to enter C6 or C7 while we hold
the punit bus semaphore, at which point everything just hangs.

Avoid this by disallowing the CPU to enter C6 or C7 before acquiring the
punit bus semaphore.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=109051
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210102802.20898-7-hdegoede@redhat.com
2017-03-02 15:46:33 +01:00
Hans de Goede e234ed2f06 i2c: designware-baytrail: Only check iosf_mbi_available() for shared hosts
If (!shared_host) simply return 0, this avoids delaying the probe if
iosf_mbi_available() returns false when an i2c bus is not using the
punit semaphore.

Also move the if (!iosf_mbi_available()) check to above the
dev_info, so that we do not repeat the dev_info on every probe
until iosf_mbi_available() returns true.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210102802.20898-6-hdegoede@redhat.com
2017-03-02 15:46:32 +01:00
Hans de Goede 62aee93753 i2c: designware-baytrail: Pass dw_i2c_dev into helper functions
Pass dw_i2c_dev into the helper functions, this is a preparation patch
for the punit semaphore fixes done in the other patches in this set.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210102802.20898-5-hdegoede@redhat.com
2017-03-02 15:46:32 +01:00
Hans de Goede 86524e5402 i2c: designware: Rename accessor_flags to flags
Rename accessor_flags to flags, so that we can use the field for
other flags too. This is a preparation patch for adding cherrytrail
support to the punit semaphore code.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210102802.20898-4-hdegoede@redhat.com
2017-03-02 15:46:31 +01:00
Ingo Molnar 174cd4b1e5 sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>
Fix up affected files that include this signal functionality via sched.h.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:32 +01:00
Linus Torvalds 7067739df2 Merge branch 'i2c/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
 "I2C has for you two new drivers (Tegra BPMP and STM32F4), interrupt
  support for pca954x muxes, and a bunch of driver bugfixes and
  improvements. Nothing really special this cycle.

  A few commits have been added to my tree just recently. Those are the
  Tegra BPMP driver and a few straightforward bugfixes or cleanups which
  I prefer to have upstream rather soonish. The rest had proper
  linux-next exposure"

* 'i2c/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (25 commits)
  i2c: thunderx: Replace pci_enable_msix()
  i2c: exynos5: fix arbitration lost handling
  i2c: exynos5: disable fifo-almost-empty irq signal when necessary
  i2c: at91: ensure state is restored after suspending
  i2c: bcm2835: Avoid possible NULL ptr dereference
  i2c: Add Tegra BPMP I2C proxy driver
  dt-bindings: Add Tegra186 BPMP I2C binding
  misc: eeprom: at24: use device_property_*() functions instead of of_get_property()
  i2c: mux: pca954x: Add interrupt controller support
  dt: bindings: i2c-mux-pca954x: Add documentation for interrupt controller
  i2c: mux: pca954x: Add missing pca9542 definition to chip_desc
  i2c: riic: correctly finish transfers
  i2c: i801: Add support for Intel Gemini Lake
  i2c: mux: pca9541: Export OF device ID table as module aliases
  i2c: mux: pca954x: Export OF device ID table as module aliases
  i2c: mux: mlxcpld: remove unused including <linux/version.h>
  i2c: busses: constify i2c_algorithm structures
  i2c: i2c-mux-gpio: rename i2c-gpio-mux to i2c-mux-gpio
  i2c: sh_mobile: document support for r8a7796 (R-Car M3-W)
  i2c: i2c-cros-ec-tunnel: Reduce logging noise
  ...
2017-02-25 14:21:18 -08:00
Jan Glauber 4c21541d8d i2c: thunderx: Replace pci_enable_msix()
Using pci_alloc_irq_vectors() instead of the deprecated
pci_enable_msix() allows to remove the msix_entry from
struct octeon_i2c and thus to get rid of the config symbol check.

Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-23 13:03:56 +01:00
Andrzej Hajda 7999eecb7e i2c: exynos5: fix arbitration lost handling
In case of arbitration lost adequate interrupt sometimes is not signaled.
As a result transfer timeouts and is not retried, as it should. To avoid
such cases code is added to check transaction status in case of every
interrupt.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Tested-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-23 13:01:22 +01:00
Andrzej Hajda fd1c9c8568 i2c: exynos5: disable fifo-almost-empty irq signal when necessary
Fifo-almost-empty irq signal should be disabled as soon as possible,
to avoid unnecessary interrupt storm. The best moment is when there is
no more data to feed fifo.
This patch fixes system stalls caused by IRQ storm.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-23 12:59:48 +01:00
Linus Torvalds 786856b6d1 Generic device properties framework updates for v4.11-rc1
Allow built-in (static) device properties to be declared
 as constant, make it possible to save memory by discarding
 alternative (but unused) built-in (static) property sets and
 add support for automatic handling of built-in properties
 to the I2C code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJYq3L9AAoJEILEb/54YlRxxIEP/j3uTccEqJ0h8EzdqyxXAdd6
 jbKYomuPzVKVOiq6MJFkddikumAq5x9D4DCatoSJb5eCZw/tgq7G3OJZHgzUtJfO
 t8ggNSEjtHGNIy0HnV4f9GdhcylUXA75C4o7XqOMdkunXzCK0ifF+NkPIxIgCoGl
 ABjDkmxIaY6Ybax+/Fc3IOvYGzE5gC9kBL1wgTqSEtZyD+CYhb47pvH3HdGBAVqc
 gxNVmc7ukmOnqTFuQXmmPzNRrVysznn/CKsxpQ3GlTJ+XNvC29XEobeBF3Nnapeu
 RYlA0IXwJVTK6X4DcZ8rydQ9ikXGXyNo/E/jxWaWBFahULFrjFf1G9WCw+Y+H4DH
 2CcxgSTE0ZuPr87Eyg6B9xlBLTbpq55jkiDrn6bSqbKMcMsoa6VZf5HLcW7QbboN
 kIa0SmZH9dmtqOVU8KE4HYrnkO5tsUZKIlHlP4c72MYH+SJZFweF4XxkAFUE7f7i
 r87I7NNp5LnILkf/pGEd0vrmfQ4TjU0TqW1upM2qDvtXTk+NDcZvvRGEl1gR/ROY
 sVhbA6MqbltAcWDAQ1RlmZw+lcSOMhPm/W47qIH8tfInabP2WuIjmtLekrduY4nl
 x13tnC/1w69ehZz5jGSBhJDgDMUvb8/HQZTKx6Kh2qJhuvd0njT2O0YQwQdISpAC
 f2+LyYefQbN7SyCMrSab
 =+P7T
 -----END PGP SIGNATURE-----

Merge tag 'device-properties-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull device property updates from Rafael J. Wysocki:
 "Generic device properties framework updates for v4.11-rc1

  Allow built-in (static) device properties to be declared as constant,
  make it possible to save memory by discarding alternative (but unused)
  built-in (static) property sets and add support for automatic handling
  of built-in properties to the I2C code"

* tag 'device-properties-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  i2c: allow specify device properties in i2c_board_info
  device property: export code duplicating array of property entries
  device property: constify property arrays values
  device property: allow to constify properties
2017-02-20 18:06:09 -08:00
Linus Torvalds 43e31e4047 ACPI updates for v4.11-rc1
- Update of the ACPICA code in the kernel to upstream revision
    20170119 including:
    * Fixes related to the handling of the bit width and bit offset
      fields in Generic Address Structure (Lv Zheng).
    * ACPI resources handling fix related to invalid resource
      descriptors (Bob Moore).
    * Fix to enable implicit result conversion for several ASL
      library functions (Bob Moore).
    * Support for method invocations as target operands in AML
      (Bob Moore).
    * Fix to use a correct operand type for DeRefOf() in some
      situations (Bob Moore).
    * Utilities updates (Bob Moore, Lv Zheng).
    * Disassembler/debugger updates (David Box, Lv Zheng).
    * Build fixes (Colin Ian King, Lv Zheng).
    * Update of copyright notices in all files (Bob Moore).
 
  - Fix for modalias handling for SPI and I2C devices with
    DT-compatible identification strings (Dan O'Donovan).
 
  - Fixes for the ACPI EC and button drivers (Lv Zheng).
 
  - ACPI processor handling fix related to CPU hotplug (online/offline)
    on x86 (Vitaly Kuznetsov).
 
  - Suspend quirk to save/restore NVS memory over S3 transitions for
    Lenovo G50-45 (Zhang Rui).
 
  - Message formatting fix for the ACPI APEI code (Colin Ian King).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJYq3J5AAoJEILEb/54YlRx9UcP/0434BwmytZkmo5vKGtmzyuE
 G4RoVNgCegq6BX8KxbML6UHHb+z7XlSHgH3mTU+Csin3OOQ4w3rgDyhwUEK2mWBO
 5bU1hwHRZfy4cpPGrAVDdAXSARJRaRBrl4Y8nZx2SD34WCVzMZJVEvBPPkjVFJP0
 1XQuGvteORcuOD5Sc1XfEStsJUVo5Uim9IaF0tHrdXhkrlsNWgMTIxt9TIKdUOJ0
 JtPK/qNQz5xK4DYo5ny9yLEAxhUFmHoQZzRLWST27eeIxtSZLAErk/Jp64sSQ1uK
 tsHD++7PrjfniHxp+uVPZKi3BexM1CyvQ7sv/amQILgH4cUhWBx7kNZtb85muwWw
 OlgkFZino19oKmdu0w/1KgLAQ71PDo+oMcc+yR1PFWwGhaYR3n/MEsjmQI8/VvcA
 PrCOOrsrW4CNZGf6nN9xunsXMMXacWMdQBV0TspXRRmtFnXdSixp7AurJl8UFg7u
 7j8vUgn2HVOIvEnBxVQCOFT2nZLyEzRL+gXNjWxGs3WJsUlYGKjD7f/SGgo3ztQh
 4VxX0aXWk1vSQ/X1sszhF4GWHIgeeYYY06gvH0cXImRZhI5X0hrLuJrNt5vxoP+u
 RzsXGuHZ5VA0YxEHOPq/o7EmG1va0JnbuyGFvdR3QUOsqIG1Z/+5DZzdJybm0chq
 E+/X0juoMuY/ZB0BXi6t
 =aJJ+
 -----END PGP SIGNATURE-----

Merge tag 'acpi-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to upstream revision
  20170119, which among other things updates copyright notices in all of
  the ACPICA files, fix a couple of issues in the ACPI EC and button
  drivers, fix modalias handling for non-discoverable devices with
  DT-compatible identification strings, add a suspend quirk for one
  platform and fix a message in the APEI code.

  Specifics:

   - Update of the ACPICA code in the kernel to upstream revision
     20170119 including:

      + Fixes related to the handling of the bit width and bit offset
        fields in Generic Address Structure (Lv Zheng)
      + ACPI resources handling fix related to invalid resource
        descriptors (Bob Moore)
      + Fix to enable implicit result conversion for several ASL library
        functions (Bob Moore)
      + Support for method invocations as target operands in AML (Bob
        Moore)
      + Fix to use a correct operand type for DeRefOf() in some
        situations (Bob Moore)
      + Utilities updates (Bob Moore, Lv Zheng)
      + Disassembler/debugger updates (David Box, Lv Zheng)
      + Build fixes (Colin Ian King, Lv Zheng)
      + Update of copyright notices in all files (Bob Moore)

   - Fix for modalias handling for SPI and I2C devices with
     DT-compatible identification strings (Dan O'Donovan)

   - Fixes for the ACPI EC and button drivers (Lv Zheng)

   - ACPI processor handling fix related to CPU hotplug (online/offline)
     on x86 (Vitaly Kuznetsov)

   - Suspend quirk to save/restore NVS memory over S3 transitions for
     Lenovo G50-45 (Zhang Rui)

   - Message formatting fix for the ACPI APEI code (Colin Ian King)"

* tag 'acpi-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
  ACPICA: Update version to 20170119
  ACPICA: Tools: Update common signon, remove compilation bit width
  ACPICA: Source tree: Update copyright notices to 2017
  ACPICA: Linuxize: Restore and fix Intel compiler build
  x86/ACPI: keep x86_cpu_to_acpiid mapping valid on CPU hotplug
  spi: acpi: Initialize modalias from of_compatible
  i2c: acpi: Initialize info.type from of_compatible
  ACPI / bus: Introduce acpi_of_modalias() equiv of of_modalias_node()
  ACPI: save NVS memory for Lenovo G50-45
  ACPI, APEI, EINJ: fix malformed newline escape
  ACPI / button: Remove lid_init_state=method mode
  ACPI / button: Change default behavior to lid_init_state=open
  ACPI / EC: Use busy polling mode when GPE is not enabled
  ACPI / EC: Remove old CLEAR_ON_RESUME quirk
  ACPICA: Update version to 20161222
  ACPICA: Parser: Update parse info table for some operators
  ACPICA: Fix a problem with recent extra support for control method invocations
  ACPICA: Parser: Allow method invocations as target operands
  ACPICA: Fix for implicit result conversion for the ToXXX functions
  ACPICA: Resources: Not a valid resource if buffer length too long
  ..
2017-02-20 17:55:15 -08:00
Alexandre Belloni e3ccc921b7 i2c: at91: ensure state is restored after suspending
When going to suspend, the I2C registers may be lost because the power to
VDDcore is cut. Restore them when resuming.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-20 19:23:52 +01:00
Stefan Wahren ababb08938 i2c: bcm2835: Avoid possible NULL ptr dereference
Since commit e247454103 ("bcm2835: Fix hang for writing messages
larger than 16 bytes") the interrupt handler is prone to a possible
NULL pointer dereference. This could happen if an interrupt fires
before curr_msg is set by bcm2835_i2c_xfer_msg() and randomly occurs
on the RPi 3. Even this is an unexpected behavior the driver must
handle that with an error instead of a crash.

Reported-by: Peter Robinson <pbrobinson@gmail.com>
Fixes: e247454103 ("bcm2835: Fix hang for writing messages larger than 16 bytes")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-20 19:19:54 +01:00
Shardar Shariff Md 0297ffa69c i2c: Add Tegra BPMP I2C proxy driver
Add Tegra BPMP I2C driver. The BPMP is the boot and power management
processor embedded in Tegra SoCs. In newer SoC versions, access to one
of the I2C busses goes via the BPMP, requiring a different "proxy" I2C
driver that accesses the bus via the real I2C driver embedded in the
BPMP firmware.

Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-20 19:12:38 +01:00
Rafael J. Wysocki a74d1cafc2 Merge branches 'acpi-bus', 'acpi-sleep' and 'acpi-processor'
* acpi-bus:
  spi: acpi: Initialize modalias from of_compatible
  i2c: acpi: Initialize info.type from of_compatible
  ACPI / bus: Introduce acpi_of_modalias() equiv of of_modalias_node()

* acpi-sleep:
  ACPI: save NVS memory for Lenovo G50-45

* acpi-processor:
  x86/ACPI: keep x86_cpu_to_acpiid mapping valid on CPU hotplug
2017-02-20 14:28:03 +01:00
Jarkko Nikula 12688dc21f Revert "i2c: designware: detect when dynamic tar update is possible"
This reverts commit 63d0f0a695.

It caused a regression on platforms where I2C controller is synthesized
with dynamic TAR update disabled. Detection code is testing is bit
DW_IC_CON_10BITADDR_MASTER in register DW_IC_CON read-only but fails to
restore original value in case bit is read-write.

Instead of fixing this we revert the commit since it was preparation for
the commit 0317e6c0f1 ("i2c: designware: do not disable adapter after
transfer") which was also reverted.

Reported-by: Shah Nehal-Bakulchandra <Nehal-bakulchandra.Shah@amd.com>
Reported-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Acked-By: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: <stable@vger.kernel.org> # v4.9+
Fixes: 63d0f0a695 ("i2c: designware: detect when dynamic tar update is possible")
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-14 22:10:26 +01:00
Wolfram Sang 465b2c4ab8 Merge branch 'i2c-mux/for-next' of https://github.com/peda-r/i2c-mux into i2c/for-4.11 2017-02-10 12:51:23 +01:00
Phil Reid f2114795f7 i2c: mux: pca954x: Add interrupt controller support
Various muxes can aggregate multiple interrupts from each i2c bus.
All of the muxes with interrupt support combine the active low irq lines
using an internal 'and' function and generate a combined active low
output. The muxes do provide the ability to read a control register to
determine which irq is active. By making the mux an irq controller isr
latency can potentially be reduced by reading the status register and
then only calling the registered isr on that bus segment.

As there is no irq masking on the mux irq are disabled until irq_unmask is
called at least once.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-02-10 08:23:51 +01:00
Phil Reid f8251f1dfd i2c: mux: pca954x: Add missing pca9542 definition to chip_desc
The spec for the pca954x was missing. This chip is the same as the pca9540
except that it has interrupt lines. While the i2c_device_id table mapped
the pca9542 to the pca9540 definition the compatible table did not. In
preparation for irq support add the pca9542 definition.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-02-10 08:23:50 +01:00
Chris Brandt 71ccea095e i2c: riic: correctly finish transfers
This fixes the condition where the controller has not fully completed its
final transfer and leaves the bus and controller in a undesirable state.

At the end of the last transmitted byte, the existing driver would just
signal for a STOP condition to be transmitted then immediately signal
completion. However, the full STOP procedure might not have fully taken
place by the time the runtime PM shuts off the peripheral clock, leaving
the bus in a suspended state.

Alternatively, the STOP condition on the bus may have completed, but when
the next transaction is requested by the upper layer, not all the
necessary register cleanup was finished from the last transfer which made
the driver return BUS BUSY when it really wasn't.

This patch now makes all transmit and receive transactions wait for the
STOP condition to fully complete before signaling a completed transaction.
With this new method, runtime PM no longer seems to be an issue.

Fixes: 310c18a414 ("i2c: riic: add driver")
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-09 17:43:31 +01:00
Mika Westerberg 9827f9eb79 i2c: i801: Add support for Intel Gemini Lake
Intel Gemini Lake has the same SMBus host controller than Intel Broxton.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-09 17:39:16 +01:00
Javier Martinez Canillas e278d64190 i2c: mux: pca9541: Export OF device ID table as module aliases
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the
device was registered via OF, this means that exporting the OF device ID
table device aliases in the module is not needed. But in order to change
how the core reports modaliases to user-space, it's better to export it.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-09 17:31:05 +01:00
Javier Martinez Canillas acf6ef1d6c i2c: mux: pca954x: Export OF device ID table as module aliases
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the
device was registered via OF, this means that exporting the OF device ID
table device aliases in the module is not needed. But in order to change
how the core reports modaliases to user-space, it's better to export it.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-09 17:31:05 +01:00
Wei Yongjun 1da8726700 i2c: mux: mlxcpld: remove unused including <linux/version.h>
Remove including <linux/version.h> that don't need it.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-09 17:29:21 +01:00
Ricardo Ribalda bbb27fc33d i2c: piix4: Request the SMBUS semaphore inside the mutex
SMBSLVCNT must be protected with the piix4_mutex_sb800 in order to avoid
multiple buses accessing to the semaphore at the same time.

Fixes: 701dc207bf ("i2c: piix4: Avoid race conditions with IMC")
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-09 17:13:01 +01:00
Ricardo Ribalda f43128c752 i2c: piix4: Fix request_region size
Since '701dc207bf55 ("i2c: piix4: Avoid race conditions with IMC")' we
are using the SMBSLVCNT register at offset 0x8. We need to request it.

Fixes: 701dc207bf ("i2c: piix4: Avoid race conditions with IMC")
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-09 17:10:38 +01:00
Bhumika Goyal 92d9d0dfb0 i2c: busses: constify i2c_algorithm structures
Declare i2c_algorithm structures as const as they are only stored in the
algo field of an i2c_adapter structure. This field is of type const, so
i2c_algorithm structures having this property can be made const too.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> for
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-09 17:06:52 +01:00
Dmitry Torokhov d3e1b617ae i2c: allow specify device properties in i2c_board_info
With many drivers converting to using generic device properties, it is
useful to provide array of device properties when instantiating new i2c
client via i2c_board_info and have them automatically added to the device
in question.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-08 13:34:41 +01:00
Dan O'Donovan 622b307712 i2c: acpi: Initialize info.type from of_compatible
When using devicetree i2c_board_info.type is set to the compatible
string with the vendor prefix removed. For I2C devices described via
ACPI the i2c_board_info.type string is set to the ACPI device name. When
using ACPI and DT ids this string ends up something like "PRP0001:00".

If the of_compatible property is present try to use that instead. This
makes it easier to instantiate i2c drivers through ACPI with DT ids.

Signed-off-by: Dan O'Donovan <dan@emutex.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07 13:31:50 +01:00
Guenter Roeck 22ae11245e i2c: i2c-cros-ec-tunnel: Reduce logging noise
If an i2c access through i2c-cros-ec-tunnel returns an error, the following
log message is seen on the console.

cros-ec-i2c-tunnel ff200000.spi:ec@0:i2c-tunnel:
			Error parsing EC i2c message -121

This can happen a lot if, for example, the i2c-detect command is executed.

Since it is perfectly normal for an i2c controller to report an error,
drop the message. Also, report -ENXIO instead of -EREMOTEIO if the access
error is due to NAK from the device, and return -EIO instead of -EREMOTEIO
for other errors, as suggested in Documentation/i2c/fault-codes.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-28 22:16:38 +01:00
Luis Oliveira cefae80249 i2c: core: helper function to detect slave mode
This function has the purpose of mode detection by checking the
device nodes for a reg matching with the I2C_OWN_SLAVE_ADDREESS flag.
Currently only checks using OF functions (ACPI slave not supported yet).

Signed-off-by: Luis Oliveira <lolivei@synopsys.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-28 22:12:37 +01:00
Gao Pan e13fe92bb5 i2c: imx-lpi2c: add VLLS mode support
When system enters VLLS mode, module power is turned off. As a result,
all registers are reset to HW default value. After exiting VLLS mode,
registers are still in default mode. As a result, the pinctrl settings
are incorrect, which will affect the module function.

The patch recovers the pinctrl setting when exit VLLS mode.

Signed-off-by: Gao Pan <pandy.gao@nxp.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
[wsa: added missing include]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-26 00:24:23 +01:00
Bhumika Goyal 50b918c5a6 i2c: omap: constify dev_pm_ops structures
Declare dev_pm_ops structures as const as they are only stored in the pm
field of a device_driver structure. This field is of type const, so
dev_pm_ops structures having similar properties can be declared const
too.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-25 22:17:24 +01:00
Grzegorz Jaszczyk a4f64ae2b5 i2c: mv64xxx: add suspend/resume support
This commit implements suspend/resume support in the mv64xxx I2C
controller driver. There is no need to implement a ->suspend() hook, as
calling mv64xxx_i2c_hw_init() at ->resume() time is enough.

Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
Reviewed-by: Lior Amsalem <alior@marvell.com>
Tested-by: Lior Amsalem <alior@marvell.com>
[Thomas: switch to dev_pm_ops, fix build warning when !PM.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-25 22:17:23 +01:00
M'boumba Cedric Madianga 62817fc8d2 i2c: stm32f4: add driver
This patch adds support for the STM32F4 I2C controller.

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-25 22:16:59 +01:00
Mike Looijmans 0e1929dede i2c: i2c-cadence: Initialize configuration before probing devices
The cadence I2C driver calls cdns_i2c_writereg(..) to setup a workaround
in the controller, but did so after calling i2c_add_adapter() which starts
probing devices on the bus. Change the order so that the configuration is
completely finished before using the adapter.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-25 22:07:40 +01:00
Ricardo Ribalda 701dc207bf i2c: piix4: Avoid race conditions with IMC
On AMD's SB800 and upwards, the SMBus is shared with the Integrated
Micro Controller (IMC).

The platform provides a hardware semaphore to avoid race conditions
among them. (Check page 288 of the SB800-Series Southbridges Register
Reference Guide http://support.amd.com/TechDocs/45482.pdf)

Without this patch, many access to the SMBus end with an invalid
transaction or even with the bus stalled.

Reported-by: Alexandre Desnoyers <alex@qtec.com>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>:
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-12 20:52:12 +01:00
Colin Ian King 2659161dd4 i2c: fix spelling mistake: "insufficent" -> "insufficient"
Trivial fix to spelling mistake in WARN message, insufficient has
an insufficient number of i's in the spelling.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-12 20:24:43 +01:00
John Garry 6f724fb303 i2c: print correct device invalid address
In of_i2c_register_device(), when the check for
device address validity fails we print the info.addr,
which has not been assigned properly.

Fix this by printing the actual invalid address.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Fixes: b4e2f6ac12 ("i2c: apply DT flags when probing")
Cc: stable@kernel.org
2017-01-12 20:06:15 +01:00
Dmitry Torokhov 331c342552 i2c: do not enable fall back to Host Notify by default
Falling back unconditionally to HostNotify as primary client's interrupt
breaks some drivers which alter their functionality depending on whether
interrupt is present or not, so let's introduce a board flag telling I2C
core explicitly if we want wired interrupt or HostNotify-based one:
I2C_CLIENT_HOST_NOTIFY.

For DT-based systems we introduce "host-notify" property that we convert
to I2C_CLIENT_HOST_NOTIFY board flag.

Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-12 20:06:15 +01:00
Vlad Tsyrklevich 30f939feae i2c: fix kernel memory disclosure in dev interface
i2c_smbus_xfer() does not always fill an entire block, allowing
kernel stack memory disclosure through the temp variable. Clear
it before it's read to.

Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
2017-01-12 20:06:10 +01:00
Linus Torvalds 7c0f6ba682 Replace <asm/uaccess.h> with <linux/uaccess.h> globally
This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
  sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-24 11:46:01 -08:00
Peter Rosin 649ac63a9a i2c: mux: mlxcpld: fix i2c mux selection caching
smbus functions return -ve on error, 0 on success.  However,
__i2c_transfer() have a different return signature - -ve on error, or
number of buffers transferred (which may be zero or greater).

The upshot of this is that the sense of the test is reversed when using
the mux on a bus supporting the master_xfer method: we cache the value
and never retry if we fail to transfer any buffers, but if we succeed,
we clear the cached value.

Fix this by making mlxcpld_mux_reg_write() return a -ve error code for
all failure cases, just as was done in commit 7f638c1cb0 ("i2c: mux:
pca954x: fix i2c mux selection caching").

This also aligns the implementations of these two muxes in this area.

Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-18 08:54:38 +01:00
Tin Huynh 8e598769c5 i2c: designware: fix wrong Tx/Rx FIFO for ACPI
ACPI always sets Tx/Rx FIFO to 32. This configuration will
cause problem if the IP core supports a FIFO size of less than 32.
The driver should read the FIFO size from the IP and select the smaller
one of the two.

Signed-off-by: Tin Huynh <tnhuynh@apm.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-17 19:38:03 +01:00
Tin Huynh 1635c5d04e i2c: xgene: Fix missing code of DTB support
In DTB case, i2c-core doesn't create slave device which is installed
on i2c-xgene bus because of missing code in this driver.
This patch fixes this issue.

Signed-off-by: Tin Huynh <tnhuynh@apm.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-17 19:35:41 +01:00
Russell King 7f638c1cb0 i2c: mux: pca954x: fix i2c mux selection caching
smbus functions return -ve on error, 0 on success.  However,
__i2c_transfer() have a different return signature - -ve on error, or
number of buffers transferred (which may be zero or greater.)

The upshot of this is that the sense of the test is reversed when using
the mux on a bus supporting the master_xfer method: we cache the value
and never retry if we fail to transfer any buffers, but if we succeed,
we clear the cached value.

Fix this by making pca954x_reg_write() return a negative error code for
all failure cases.

Fixes: 463e8f845c ("i2c: mux: pca954x: retry updating the mux selection on failure")
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-17 19:29:44 +01:00
Jan Glauber 493ff7e2cd i2c: octeon: thunderx: Limit register access retries
Do not infinitely retry register readq and writeq operations
in order to not lock up the CPU in case the TWSI gets stuck.

Return -EIO in case of a failed data read. For all other
cases just return so subsequent operations will fail
and trigger the recovery.

Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-17 19:27:44 +01:00
Linus Torvalds 179a7ba680 This release has a few updates:
o STM can hook into the function tracer
  o Function filtering now supports more advance glob matching
  o Ftrace selftests updates and added tests
  o Softirq tag in traces now show only softirqs
  o ARM nop added to non traced locations at compile time
  o New trace_marker_raw file that allows for binary input
  o Optimizations to the ring buffer
  o Removal of kmap in trace_marker
  o Wakeup and irqsoff tracers now adhere to the set_graph_notrace file
  o Other various fixes and clean ups
 
 Note, there are two patches marked for stable. These were discovered
 near the end of the 4.9 rc release cycle. By the time I had them tested
 it was just a matter of days before 4.9 would be released, and I
 figured I would just submit them in the merge window. They are old
 bugs and not critical. Nothing non-root could abuse.
 -----BEGIN PGP SIGNATURE-----
 
 iQExBAABCAAbBQJYUrFHFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
 2+AIAIr20kSQV/nA5htGAeCTobVk3WUxY6bvjd9mIJDKPP19akNLyREW0G3KnfCr
 yhx4aFRZG98fRu/6F8qieRosyN36lADDVYHelMFHMpcTOpE2aZGjaaOuNGxOEA9v
 FmMPTX+K3+dzKyFP4l68R3+5JuQ1/AqLTioTWeLW8IDQ2OOVsjD8+0BuXrNKMJDY
 o6U4Hk5U/vn+zHc6BmgBzloAXemBd7iJ1t5V3FRRGvm8yv3HU85Twc5ofGeYTWvB
 J8PboEywRlIzxg0Kd8mxnMI5PgaKZSEc2ub8E7cY/CZ5PYpDE2xDA2hJmJgfYp00
 1VW+DHRpRZfElsCcya6S6P4bs5Y=
 =MGZ/
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "This release has a few updates:

   - STM can hook into the function tracer
   - Function filtering now supports more advance glob matching
   - Ftrace selftests updates and added tests
   - Softirq tag in traces now show only softirqs
   - ARM nop added to non traced locations at compile time
   - New trace_marker_raw file that allows for binary input
   - Optimizations to the ring buffer
   - Removal of kmap in trace_marker
   - Wakeup and irqsoff tracers now adhere to the set_graph_notrace file
   - Other various fixes and clean ups"

* tag 'trace-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (42 commits)
  selftests: ftrace: Shift down default message verbosity
  kprobes/trace: Fix kprobe selftest for newer gcc
  tracing/kprobes: Add a helper method to return number of probe hits
  tracing/rb: Init the CPU mask on allocation
  tracing: Use SOFTIRQ_OFFSET for softirq dectection for more accurate results
  tracing/fgraph: Have wakeup and irqsoff tracers ignore graph functions too
  fgraph: Handle a case where a tracer ignores set_graph_notrace
  tracing: Replace kmap with copy_from_user() in trace_marker writing
  ftrace/x86_32: Set ftrace_stub to weak to prevent gcc from using short jumps to it
  tracing: Allow benchmark to be enabled at early_initcall()
  tracing: Have system enable return error if one of the events fail
  tracing: Do not start benchmark on boot up
  tracing: Have the reg function allow to fail
  ring-buffer: Force rb_end_commit() and rb_set_commit_to_write() inline
  ring-buffer: Froce rb_update_write_stamp() to be inlined
  ring-buffer: Force inline of hotpath helper functions
  tracing: Make __buffer_unlock_commit() always_inline
  tracing: Make tracepoint_printk a static_key
  ring-buffer: Always inline rb_event_data()
  ring-buffer: Make rb_reserve_next_event() always inlined
  ...
2016-12-15 13:49:34 -08:00
Linus Torvalds 8600b697cd Merge branch 'i2c/for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:

 - the first series of making i2c_device_id optional instead of
   mandatory (in favor of alternatives like of_device_id).

   This involves adding a new probe callback (probe_new) which removes
   some peculiarities I2C had for a long time now. The new probe is
   matching the other subsystems now and the old one will be removed
   once all users are converted. It is expected to take a while but
   there is ongoing interest in that.

 - SMBus Host Notify introduced 4.9 got refactored. They are now using
   interrupts instead of the alert callback which solves multiple
   issues.

 - new drivers for iMX LowPower I2C, Mellanox CPLD and its I2C mux

 - significant refactoring for bcm2835 driver

 - the usual set of driver updates and improvements

* 'i2c/for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (46 commits)
  i2c: fsl-lpi2c: read lpi2c fifo size in probe()
  i2c: octeon: thunderx: Remove double-check after interrupt
  i2c: octeon: thunderx: TWSI software reset in recovery
  i2c: cadence: Allow Cadence I2C to be selected for Cadence Xtensa CPUs
  i2c: sh_mobile: Add per-Generation fallback bindings
  i2c: rcar: Add per-Generation fallback bindings
  i2c: imx-lpi2c: add low power i2c bus driver
  dt-bindings: i2c: imx-lpi2c: add devicetree bindings
  i2c: designware-pcidrv: Add 10bit address feature to medfield/merrifield
  i2c: pxa: Add support for the I2C units found in Armada 3700
  i2c: pxa: Add definition of fast and high speed modes via the regs layout
  dt-bindings: i2c: pxa: Update the documentation for the Armada 3700
  i2c: qup: support SMBus block read
  i2c: qup: add ACPI support
  i2c: designware: Consolidate default functionality bits
  i2c: i2c-mux-gpio: update mux with gpiod_set_array_value_cansleep
  i2c: mux: pca954x: Add ACPI support for pca954x
  i2c: use an IRQ to report Host Notify events, not alert
  i2c: i801: remove SMBNTFDDAT reads as they always seem to return 0
  i2c: i801: use the BIT() macro for FEATURES_* also
  ...
2016-12-15 12:56:35 -08:00
Gao Pan 6eb89ef029 i2c: fsl-lpi2c: read lpi2c fifo size in probe()
The lpi2c fifo size is a read only parameter resides Parameter
Register. It's better to read lpi2c tx/rx fifo size in probe()
other than just define a macro for it.

Signed-off-by: Gao Pan <pandy.gao@nxp.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-11 23:06:39 +01:00
Jan Glauber 38190dfb70 i2c: octeon: thunderx: Remove double-check after interrupt
Commit 1bb1ff3e7c ("i2c: octeon: Improve performance if interrupt is
early") added a double-check around the wait_event_timeout() condition.
The performance problem that this commit tried to work-around
could not be reproduced. It also makes the wait condition more
complicated then it should be. Therefore remove the double-check.

Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-11 22:59:10 +01:00
Jan Glauber ccee1a4cdc i2c: octeon: thunderx: TWSI software reset in recovery
I've seen i2c recovery reporting long loops of:

[ 1035.887818] i2c i2c-4: SCL is stuck low, exit recovery
[ 1037.999748] i2c i2c-4: SCL is stuck low, exit recovery
[ 1040.111694] i2c i2c-4: SCL is stuck low, exit recovery
...

Add a TWSI software reset which clears the status and
STA,STP,IFLG in SW_TWSI_EOP_TWSI_CTL.

With this the recovery works fine and above message is not seen.

Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-11 22:58:34 +01:00
Jan Kotas f8989783d7 i2c: cadence: Allow Cadence I2C to be selected for Cadence Xtensa CPUs
This patch allows Cadence I2C controller to be selected in systems using Cadence Xtensa processors.

Signed-off-by: Jan Kotas <jank@cadence.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-11 22:56:30 +01:00
Simon Horman b880ccaf17 i2c: sh_mobile: Add per-Generation fallback bindings
Add per-Generation fallback bindings for R-Car SoCs.

This is in keeping with the compatibility string scheme is being adopted
for drivers for Renesas SoCs.

Also, improve readability by listing the rmobile fallback compatibility
string after the more-specific compatibility strings they provide a
fallback for.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-11 22:52:28 +01:00