Commit Graph

256 Commits

Author SHA1 Message Date
Frank Rowand 0b3ce78e90 of: cache phandle nodes to reduce cost of of_find_node_by_phandle()
Create a cache of the nodes that contain a phandle property.  Use this
cache to find the node for a given phandle value instead of scanning
the devicetree to find the node.  If the phandle value is not found
in the cache, of_find_node_by_phandle() will fall back to the tree
scan algorithm.

The cache is initialized in of_core_init().

The cache is freed via a late_initcall_sync() if modules are not
enabled.

If the devicetree is created by the dtc compiler, with all phandle
property values auto generated, then the size required by the cache
could be 4 * (1 + number of phandles) bytes.  This results in an O(1)
node lookup cost for a given phandle value.  Due to a concern that the
phandle property values might not be consistent with what is generated
by the dtc compiler, a mask has been added to the cache lookup algorithm.
To maintain the O(1) node lookup cost, the size of the cache has been
increased by rounding the number of entries up to the next power of
two.

The overhead of finding the devicetree node containing a given phandle
value has been noted by several people in the recent past, in some cases
with a patch to add a hashed index of devicetree nodes, based on the
phandle value of the node.  One concern with this approach is the extra
space added to each node.  This patch takes advantage of the phandle
property values auto generated by the dtc compiler, which begin with
one and monotonically increase by one, resulting in a range of 1..n
for n phandle values.  This implementation should also provide a good
reduction of overhead for any range of phandle values that are mostly
in a monotonic range.

Performance measurements by Chintan Pandya <cpandya@codeaurora.org>
of several implementations of patches that are similar to this one
suggest an expected reduction of boot time by ~400ms for his test
system.  If the cache size was decreased to 64 entries, the boot
time was reduced by ~340 ms.  The measurements were on a 4.9.73 kernel
for arch/arm64/boot/dts/qcom/sda670-mtp.dts, contains 2371 nodes and
814 phandle values.

Reported-by: Chintan Pandya <cpandya@codeaurora.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-03-07 14:50:09 -06:00
Stephen Boyd bd6f2fd5a1 of: Support parsing phandle argument lists through a nexus node
Platforms like 96boards have a standardized connector/expansion
slot that exposes signals like GPIOs to expansion boards in an
SoC agnostic way. We'd like the DT overlays for the expansion
boards to be written once without knowledge of the SoC on the
other side of the connector. This avoids the unscalable
combinatorial explosion of a different DT overlay for each
expansion board and SoC pair.

We need a way to describe the GPIOs routed through the connector
in an SoC agnostic way. Let's introduce nexus property parsing
into the OF core to do this. This is largely based on the
interrupt nexus support we already have. This allows us to remap
a phandle list in a consumer node (e.g. reset-gpios) through a
connector in a generic way (e.g. via gpio-map). Do this in a
generic routine so that we can remap any sort of variable length
phandle list.

Taking GPIOs as an example, the connector would be a GPIO nexus,
supporting the remapping of a GPIO specifier space to multiple
GPIO providers on the SoC. DT would look as shown below, where
'soc_gpio1' and 'soc_gpio2' are inside the SoC, 'connector' is an
expansion port where boards can be plugged in, and
'expansion_device' is a device on the expansion board.

	soc {
		soc_gpio1: gpio-controller1 {
			#gpio-cells = <2>;
		};

		soc_gpio2: gpio-controller2 {
			#gpio-cells = <2>;
		};
	};

	connector: connector {
		#gpio-cells = <2>;
		gpio-map = <0 0 &soc_gpio1 1 0>,
			   <1 0 &soc_gpio2 4 0>,
			   <2 0 &soc_gpio1 3 0>,
			   <3 0 &soc_gpio2 2 0>;
		gpio-map-mask = <0xf 0x0>;
		gpio-map-pass-thru = <0x0 0x1>
	};

	expansion_device {
		reset-gpios = <&connector 2 GPIO_ACTIVE_LOW>;
	};

The GPIO core would use of_parse_phandle_with_args_map() instead
of of_parse_phandle_with_args() and arrive at the same type of
result, a phandle and argument list. The difference is that the
phandle and arguments will be remapped through the nexus node to
the underlying SoC GPIO controller node. In the example above,
we would remap 'reset-gpios' from <&connector 2 GPIO_ACTIVE_LOW>
to <&soc_gpio1 3 GPIO_ACTIVE_LOW>.

Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-02-12 08:37:58 -06:00
Linus Torvalds 2bed26606b DeviceTree updates for 4.16:
- Convert to use memblock_virt_alloc in DT code which supports bootmem
   arches. With this we can remove the arch specific
   early_init_dt_alloc_memory_arch() functions.
 
 - Enable running the DT unittests on UML
 
 - Use SPDX license tags on DT files
 
 - Fix early FDT kconfig ifdef logic
 
 - Clean-up unittest Makefile
 
 - Fix function comment for of_irq_parse_raw
 
 - Add missing documentation for linux,initrd-{start,end} properties
 
 - Clean-up of binding examples using uppercase hex
 
 - Add trivial devices W83773G and Infineon TLV493D-A1B6
 
 - Add missing STM32 SoC bindings
 
 - Various small binding doc fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJac0m3EBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcOmXA/9
 G/ZySEtV2RnW/z8bckNnG98F9M/yxFwKARYb4HPDGr4C6fYy9IO3sQ25Gjn9GgQm
 RzcOk40P+3YQvkb5eyha6zYYxrBwKNHjRoJJWpCpNAolJrYRgPn7gB9GLxs15mc8
 F1EdSrdJDsNxxrc44T6hJ2xfU/sY5Q7E9xVAKD9pStmENUhzyLnPuyT4UrqAnCVC
 1tqBjYgmHWsQxzgO9tSM629xKxgBVLPjoOULN8vWTcN+5RFQSgB/MFv611SKXo2h
 cIDH7Hm61MBMvblGTtEkz1pi+mF62BOvaHJdYKdAF0i1HrjIyIEysHC6rKrlYsF1
 B39HY8D+kIPr39OCdn6dONDtrWkmPSc/MYfqLjFDPIwgNtgDRkv9kugEi39/LTKP
 htpcD9zctRQLuDJtW+1TyQvNtEHEPY2QhRjKb1SdD4xK/phMcEhc8+sW88jFygtP
 xlNb12FCCjw83k801oX1QHgWR8mQg0cj2hrJxrMIJ+Hrb23TvBdN+wtPc6WkKjol
 zqHZ9vFK4z8LIPR6jPLsz9vAIBHcXKVWgSGSf41MhTSZYTOznR7HG1wgTcq4XMld
 VpKdWKbRa3B/ZqP01eCHmBLIt/f0pcieoa7b20uIf2PjWQmzRkaX9A0yfWrYsV/V
 JQogXMCSe7zfZBxrLRx37UP7hqMEIgWeTN+Ek0a4dOI=
 =v6gj
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:

 - Convert to use memblock_virt_alloc in DT code which supports
   bootmem arches. With this we can remove the arch specific
   early_init_dt_alloc_memory_arch() functions.

 - Enable running the DT unittests on UML

 - Use SPDX license tags on DT files

 - Fix early FDT kconfig ifdef logic

 - Clean-up unittest Makefile

 - Fix function comment for of_irq_parse_raw

 - Add missing documentation for linux,initrd-{start,end} properties

 - Clean-up of binding examples using uppercase hex

 - Add trivial devices W83773G and Infineon TLV493D-A1B6

 - Add missing STM32 SoC bindings

 - Various small binding doc fixes

* tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (23 commits)
  xtensa: remove arch specific early DT functions
  x86: remove arch specific early_init_dt_alloc_memory_arch
  nios2: remove arch specific early_init_dt_alloc_memory_arch
  mips: remove arch specific early_init_dt_alloc_memory_arch
  metag: remove arch specific early DT functions
  cris: remove arch specific early DT functions
  libfdt: remove unnecessary include directive from <linux/libfdt.h>
  of: unittest: refactor Makefile
  of/fdt: use memblock_virt_alloc for early alloc
  of: Use SPDX license tag for DT files
  of/fdt: Fix #ifdef dependency of early flattree declarations
  dt-bindings: h8300 clocksource: correct spelling of pulse
  dt-bindings: imx6q-pcie: Add required property for i.MX6SX
  mmc: Don't reference Linux-specific OF_GPIO_ACTIVE_LOW flag in DT binding
  dt-bindings: Use lower case hex in unit-addresses
  dt-bindings: display: panel: Fix compatible string for Toshiba LT089AC29000
  dt-bindings: Add Infineon TLV493D-A1B6
  dt-bindings: mailbox: ti,message-manager: Fix interrupt name error
  dt-bindings: chosen: Document linux,initrd-{start,end}
  dt-bindings: arm: document supported STM32 SoC family
  ...
2018-02-01 10:57:45 -08:00
Rob Herring af6074fc9a of: Use SPDX license tag for DT files
Convert remaining DT files to use SPDX-License-Identifier tags.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-01-08 08:22:45 -06:00
Suzuki K Poulose a0e71cd9b1 of: Add helper for mapping device node to logical CPU number
Add a helper to map a device node to a logical CPU number to avoid
duplication. Currently this is open coded in different places (e.g
gic-v3, coresight). The helper tries to map device node to a "possible"
logical CPU id, which may not be online yet. It is the responsibility
of the user to make sure that the CPU is online. The helper uses
of_cpu_device_node_get() to retrieve the device node for a given CPU
(which uses per_cpu data if available else falls back to slower
of_get_cpu_node()).

Cc: devicetree@vger.kernel.org
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-01-02 16:43:12 +00:00
Linus Torvalds c633e898bd DeviceTree fixes for 4.15:
- Remove mc13892 as a trivial device
 
 - Improve of_find_node_by_name() documentation
 
 - Fix unit test dtc warnings
 
 - Clean-ups of USB binding documentation
 
 - Fix potential NULL deref in of_pci_map_rid
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJaEx6REBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcOnnRAA
 kP/o4X2Zo2VCZMHkLunDIwXXmNAn+Eh6WzbzWROn/J8A3sBH2jMJWzQrfBQqdUTC
 KXtJkDxmIFqtaUI6aD5ZekLZ/dE/iDAwzYtHMwmcw73g2An1+mxeLnv7GGTD3V9Y
 kiAeLqD3d1dS1ee+d/+g4t8Lj5W+8ClFyZk/CJ5oBRtWfyh/53vZsw/PuCSooXFY
 gFn/5YRctQyk5x/F/ELGRSuN54Lz9+wHG2pJc83+hRSbpvPJWiisXdGH/dhGO+V8
 YhbSldtjfUZBNgFwdJJQISYw/6jA7iETwIy69cIHkJ674/dkyyw4IzgvjVocQN5e
 Q7egpeh/3YXNSSZe+gSqj6LjERrX8RIlHFhS28qgliA3UrtnPgw3RbhEaO2CSBHz
 /MoYK/ZjTwXYgDjjSP05WQ+MsnogiAYUhMx4GNcAq092BDOd9f0pzIiapLwrzje3
 rWHixC4lMsU97X5jJhu+Er6d8AKl2mDoI2J3UCOsxlM0sIsTTk10qCpXwIes2TKk
 qMSCUZfwTO239w2DUG/TokXi8Q1v28TiKT1JE6yaQe6VDXHPRfxnGrJ57b4HZYPr
 139jXxJ6Zs+qOpfKI8c11VpYHxxR4uSMIXECyCUEpdASNP5TmcRnMj9c3RtxsK3o
 CB4/Pjk5BA4svnzi2Aec/49ubkoSl0YKrmFyG7xDY+w=
 =pnqr
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-fixes-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree fixes from Rob Herring:

 - Remove mc13892 as a trivial device

 - Improve of_find_node_by_name() documentation

 - Fix unit test dtc warnings

 - Clean-ups of USB binding documentation

 - Fix potential NULL deref in of_pci_map_rid

* tag 'devicetree-fixes-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: trivial-devices: Remove fsl,mc13892
  of: Document exactly what of_find_node_by_name() puts
  of: unittest: disable interrupts_property warning
  of: unittest: let dtc generate __local_fixups__
  dt-bindings: usb: document hub and host-controller properties
  dt-bindings: usb: clean up compatible property
  dt-bindings: usb: fix reg-property port-number range
  dt-bindings: usb: fix example hub node name
  of/pci: Fix theoretical NULL dereference
2017-11-20 21:38:41 -10:00
Stephen Boyd 02a876b504 of: Document exactly what of_find_node_by_name() puts
It isn't clear if this function of_node_put()s the 'from'
argument, or the node it searches. Clearly indicate which
variable is touched. Fold in some more fixes from Randy too
because we're in the area.

Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-20 12:15:44 -06:00
Linus Torvalds 37cb8e1f8e DeviceTree for 4.15:
- kbuild cleanups and improvements for dtbs
 
 - Code clean-up of overlay code and fixing for some long standing memory
   leak and race condition in applying overlays
 
 - Improvements to DT memory usage making sysfs/kobjects optional and
   skipping unflattening of disabled nodes. This is part of kernel
   tinification efforts.
 
 - Final piece of removing storing the full path for every DT node. The
   prerequisite conversion of printk's to use device_node format
   specifier happened in 4.14.
 
 - Sync with current upstream dtc. This brings additional checks to dtb
   compiling.
 
 - Binding doc tree wide removal of leading 0s from examples
 
 - RTC binding documentation adding missing devices and some
   consolidation of duplicated bindings
 
 - Vendor prefix documentation for nutsboard, Silicon Storage Technology,
   shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH,
   Opal Kelly, and Next Thing
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJaCwaSEBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcNzeA/8
 C8uQhSsX2+UQZvFzcEA8KQAMGT3kYdrcf+gidRKwCEUWg1qscUEpTb3n3Rm5NUbU
 RPD1s6GSlh6fJCMHDTQ6Tti/T59L7nZa2/AIGmUishGu4x4q1o18AobpFJmYP/EM
 SJPwnmm5RV9WcZFao1y+sY3Xtn8DStxHO4cS+dyF5/EvPN9D8nbLJfu7bgTBAZww
 HktIMB9kx+GTipRQZBvBwXoy5MJjthIZub4XwzesA4tGananj4cXlc0xaVxpdYy3
 5bO6q5F7cbrZ2uyrF+oIChpCENK4VaXh80m0WHc8EzaG++shzEkR4he1vYkwnV+I
 OYo4vsUg9dP8rBksUG1eYhS8fJKPvEBRNP7ETT5utVBy5I/tDEbo/crmQZRTIDIC
 hZbhcdZlISZj0DzkMK2ZHQV9UYtRWzXrJbZHFIPP12GCyvXVxYJUIWb9iYnUYSon
 KugygsFSpZHMWmfAhemw5/ctJZ19qhM5UIl2KZk5tMBHAf466ILmZjg0me6fYkOp
 eADfwHJ1dLMdK79CVMHSfp+vArcZXp35B16c3sWpJB36Il97Mc/9siEufCL4GKX7
 IBBnQBlbpSBKBejWVyI7Ip/Xp5u4qAQD+ZMJ9oLqBRqfWerHbDuOERlEOgwGqJYr
 9v4HvP7V8eVUvAdqXka4EBfCyAgUzXDAxG2Dfmv9vGU=
 =jgpN
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:
 "A bigger diffstat than usual with the kbuild changes and a tree wide
  fix in the binding documentation.

  Summary:

   - kbuild cleanups and improvements for dtbs

   - Code clean-up of overlay code and fixing for some long standing
     memory leak and race condition in applying overlays

   - Improvements to DT memory usage making sysfs/kobjects optional and
     skipping unflattening of disabled nodes. This is part of kernel
     tinification efforts.

   - Final piece of removing storing the full path for every DT node.
     The prerequisite conversion of printk's to use device_node format
     specifier happened in 4.14.

   - Sync with current upstream dtc. This brings additional checks to
     dtb compiling.

   - Binding doc tree wide removal of leading 0s from examples

   - RTC binding documentation adding missing devices and some
     consolidation of duplicated bindings

   - Vendor prefix documentation for nutsboard, Silicon Storage
     Technology, shimafuji, Tecon Microprocessor Technologies, DH
     electronics GmbH, Opal Kelly, and Next Thing"

* tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
  dt-bindings: usb: add #phy-cells to usb-nop-xceiv
  dt-bindings: Remove leading zeros from bindings notation
  kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib
  MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry
  kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile
  .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore
  .gitignore: sort normal pattern rules alphabetically
  dt-bindings: add vendor prefix for Next Thing Co.
  scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9
  of: dynamic: fix memory leak related to properties of __of_node_dup
  of: overlay: make pr_err() string unique
  of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove
  of: overlay: remove unneeded check for NULL kbasename()
  of: overlay: remove a dependency on device node full_name
  of: overlay: simplify applying symbols from an overlay
  of: overlay: avoid race condition between applying multiple overlays
  of: overlay: loosen overly strict phandle clash check
  of: overlay: expand check of whether overlay changeset can be removed
  of: overlay: detect cases where device tree may become corrupt
  of: overlay: minor restructuring
  ...
2017-11-14 18:25:40 -08:00
Frank Rowand e0a58f3e08 of: overlay: remove a dependency on device node full_name
The "%pOF" printf format was recently added to print the
full name of a device tree node, with the intent of changing
the node full_name field to contain only the node name instead
of the full path of the node.

dup_and_fixup_symbol_prop() duplicates a property from the
"/__symbols__" node of an overlay device tree.  The value
of each duplicated property must be fixed up to include
the full path of a node in the live device tree.  The
current code uses the node's full_name for that purpose.
Update the code to use the "%pOF" printf format to
determine the node's full path.

Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-17 20:47:37 -05:00
Rob Herring b56b5528f5 of: make kobject and bin_attribute support configurable
Having device_nodes be kobjects is only needed if sysfs or OF_DYNAMIC is
enabled. Otherwise, having a kobject in struct device_node is
unnecessary bloat in minimal kernel configurations.

Likewise, bin_attribute is only needed in struct property when sysfs is
enabled, so we can make it configurable too.

Tested-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-16 13:37:38 -05:00
Rob Herring bd82bbf38c of: fix missing kobject init for !SYSFS && OF_DYNAMIC config
The ref counting is broken for OF_DYNAMIC when sysfs is disabled because
the kobject initialization is skipped. Only the properties
add/remove/update should be skipped for !SYSFS config.

Tested-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-16 13:37:36 -05:00
Sergey Senozhatsky db179e0d0d of: do not leak console options
Do not strdup() console options. It seems that the only reason for
it to be strdup()-ed was a compilation warning: printk, UART and
console drivers, for some reason, expect char pointer instead of
const char pointer. So we can just pass `of_stdout_options', but
need to cast it to char pointer. A better fix would be to change
printk, console drivers and UART to accept const char `options';
but that will take time - there are lots of drivers to update.

The patch also fixes a possible memory leak: add_preferred_console()
can fail, but we don't kfree() options.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-12 12:22:04 -05:00
Sergei Shtylyov b0d9d92f9c of: base: use of_property_read_string()
of_alias_scan() can use of_property_read_string() -- using the modern DT API
adds some prop sanity checks as a bonus; it does add couple LoCs but only
because the original code violated the 80-column limit...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-07-24 09:50:34 -05:00
Sergei Shtylyov 8832963d89 of: base: use of_property_read_u32()
of_n_{addr|size}_cells() predate of_property_read_u32(), so they have to
basically open-code it. Using the modern DT API saves several LoCs and also
adds some prop sanity checks as a bonus...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-07-24 09:50:07 -05:00
Rob Herring 0d638a07d3 of: Convert to using %pOF instead of full_name
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.

Signed-off-by: Rob Herring <robh@kernel.org>
2017-07-18 17:09:18 -05:00
Rob Herring a4485b545e Merge branch 'dt/property-move' into dt/next 2017-07-05 08:31:52 -05:00
Rob Herring b8ba92b101 Merge branch 'topic/of-graph-base' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into dt/property-move
OF graph changes for ALSA conflict with the move of graph functions into
property.c.
2017-07-05 08:24:05 -05:00
Rob Herring 27497e11b5 of: find_node_by_full_name rewrite to compare each level
find_node_by_full_name() does the same thing as of_find_node_by_path(),
but takes no locks and doesn't work on aliases. Refactor
of_find_node_opts_by_path() into __of_find_node_by_full_path() and
replace find_node_by_full_name() with it.

Signed-off-by: Rob Herring <robh@kernel.org>
2017-06-22 12:38:29 -05:00
Rob Herring 95e6b1fa33 of: use kbasename instead of open coding
Several places in DT code open code the equivalent of kbasename.
Replace them.

The behavior for root nodes in node_name_cmp will be slightly different.
Instead of comparing "/", "" will be compared. The comparison will be
the same.

Reviewed-by: Andy Shevchenko <andy.shevhchenko@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-06-22 12:37:46 -05:00
Frank Rowand 7ace5f4806 of: be consistent in form of file mode
checkpatch whined about using S_IRUGO instead of octal equivalent
when adding phandle sysfs code, so used octal in that pending patch.
Change other instances of the S_* constants in the same file to
the octal form.

Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-06-22 11:16:44 -05:00
Sakari Ailus 1df09bc66f of: Move OF property and graph API from base.c to property.c
base.c contains both core OF functions and increasingly other
functionality such as accessing properties and graphs, including
convenience functions. In the near future this would also include OF
specific implementation of the fwnode property and graph APIs.

Create driver/of/property.c to contain procedures for accessing and
interpreting device tree properties. The procedures are moved from
drivers/of/base.c, with no changes other than copying only the includes
required by the moved procedures.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-06-01 08:50:45 -05:00
Kuninori Morimoto ac1e6958d3 of_graph: add of_graph_get_endpoint_count()
OF graph want to count its endpoint number, same as
of_get_child_count(). This patch adds of_graph_get_endpoint_count()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-17 10:21:16 +01:00
Kuninori Morimoto 0ef472a973 of_graph: add of_graph_get_port_parent()
Linux kernel already has of_graph_get_remote_port_parent(),
but, sometimes we want to get own port parent.
This patch adds of_graph_get_port_parent()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-17 10:21:12 +01:00
Kuninori Morimoto 4c9c3d595f of_graph: add of_graph_get_remote_endpoint()
It should use same method to get same result.
To getting remote-endpoint node,
let's use of_graph_get_remote_endpoint()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-17 10:21:08 +01:00
Kuninori Morimoto 00bab23f72 of-graph: export symbol of_phandle_iterator_init/next
of_for_each_phandle() uses of_phandle_iterator_init/next
but it isn't exported. So kernel module complile will say

ERROR: "of_phandle_iterator_init" [xxx.ko] undefined!
ERROR: "of_phandle_iterator_next" [xxx.ko] undefined!

This patch solved this issue

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-17 10:20:48 +01:00
Linus Torvalds 3ef2bc099d DeviceTree for 4.12:
- Fix sparse warnings in drivers/of/.
 
 - Add more overlay unittests.
 
 - Update dtc to v1.4.4-8-g756ffc4f52f6. This adds more checks on dts
 files such as unit-address formatting and stricter character sets for
 node and property names.
 
 - Add a common DT modalias function.
 
 - Move trivial-devices.txt up and out of i2c dir.
 
 - ARM NVIC interrupt controller binding.
 
 - Vendor prefixes for Sensirion, Dioo, Nordic, ROHM.
 
 - Correct some binding file locations.
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJZDM+bEBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcM7Yw/+
 NPgcfP2iFXWTC/D54neh/QliH7n5jO1YILQOd5ZJulTaKVCv1sNf4JCFVDQO/vuO
 592f2jq/blhhh8yKrH0uzHvTADYO7G+XEv3D64Lu/MpmnBHTjut9WeG5h8SZWJD+
 jGoz3Kx+Cmgxh/w1Ud/fh2qO3T0Es74TH+Ovi/AfpiywiYD8AqMlw0Tk+UtMRb12
 NsihgiYXo8nT/BKe9aOFxOJjV9Pp+pSmyX5Mu2IdOtLnl0MXk5Rvn0mXLU2/oN5n
 MONTyielvLB9opxaaSeSBadv3iXcVTagH6MinYjeQRwsLGWDy2YzxLccC/jBkyR5
 v8X/IJtpivUzCm3ji+mFEKje5u5c+N3ZLhKmTkeyNBJGwrnD7zj0gVcM5GGdK5aW
 Q4exqECklSgmpiCvlL1KWyXi3QsgMuu/wbsv5H5PgDe1wgMAtfKPrIm4kPpbLpW2
 Dp+scFfL1v9drfvbcEum6PNw2/EGZY/okaRlcr0zFn8eMsa+yBlPBIXNLzzO7arp
 6/lU6O5jDaSFRVKeKZ4qYSsc3GvN81XV+d9go6R3WR964xK4JdEkyt9Hntr1H0Hh
 lBwyhSWH4nWnsXunc4GepRPVw+cdnOQdrj6T68bqLM5Gd6XWjh88WIDXqLynH6Kn
 OBBBP/lOD7Su3antNkjnlaX9TP6BF8rNQePWne3AzzA=
 =ca1M
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:

 - fix sparse warnings in drivers/of/

 - add more overlay unittests

 - update dtc to v1.4.4-8-g756ffc4f52f6. This adds more checks on dts
   files such as unit-address formatting and stricter character sets for
   node and property names

 - add a common DT modalias function

 - move trivial-devices.txt up and out of i2c dir

 - ARM NVIC interrupt controller binding

 - vendor prefixes for Sensirion, Dioo, Nordic, ROHM

 - correct some binding file locations

* tag 'devicetree-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (24 commits)
  of: fix sparse warnings in fdt, irq, reserved mem, and resolver code
  of: fix sparse warning in of_pci_range_parser_one
  of: fix sparse warnings in of_find_next_cache_node
  of/unittest: Missing unlocks on error
  of: fix uninitialized variable warning for overlay test
  of: fix unittest build without CONFIG_OF_OVERLAY
  of: Add unit tests for applying overlays
  of: per-file dtc compiler flags
  fpga: region: add missing DT documentation for config complete timeout
  of: Add vendor prefix for ROHM Semiconductor
  of: fix "/cpus" reference leak in of_numa_parse_cpu_nodes()
  of: Add vendor prefix for Nordic Semiconductor
  dt-bindings: arm,nvic: Binding for ARM NVIC interrupt controller on Cortex-M
  dtc: update warning settings for new bus and node/property name checks
  scripts/dtc: Update to upstream version v1.4.4-8-g756ffc4f52f6
  scripts/dtc: automate getting dtc version and log in update script
  of: Add function for generating a DT modalias with a newline
  of: fix of_device_get_modalias returned length when truncating buffers
  Documentation: devicetree: move trivial-devices out of I2C realm
  dt-bindings: add vendor prefix for Dioo
  ..
2017-05-05 19:33:07 -07:00
Rob Herring 91d967497f of: fix sparse warnings in of_find_next_cache_node
sparse gives a warning that 'handle' is not a __be32:

../drivers/of/base.c:2261:61: warning: incorrect type in argument 1 (different base types)
../drivers/of/base.c:2261:61:    expected restricted __be32 const [usertype] *p
../drivers/of/base.c:2261:61:    got unsigned int const [usertype] *[assigned] handle

We could just change the type, but the code can be improved by using
of_parse_phandle instead of open coding it with of_get_property and
of_find_node_by_phandle.

Signed-off-by: Rob Herring <robh@kernel.org>
2017-05-04 12:58:48 -05:00
Alistair Popple 2475a2b6c8 drivers/of/base.c: Add of_property_read_u64_index
There is of_property_read_u32_index but no u64 variant. This patch
adds one similar to the u32 version for u64.

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-03 23:35:59 +10:00
Linus Torvalds be5165a51d DeviceTree updates for 4.11:
- Sync dtc to upstream commit 0931cea3ba20. This picks up overlay
   support in dtc.
 
 - Set dma_ops for reserved memory users.
 
 - Make references to IOMMU consistent in DT bindings.
 
 - Cleanup references to pm_power_off in bindings.
 
 - Move some display bindings that snuck into the old bindings/video/
   path.
 
 - Fix some wrong documentation paths caused from binding restructuring.
 
 - Vendor prefixes for Faraday and Fujitsu.
 
 - Fix an of_node ref counting leak in of_find_node_opts_by_path
 
 - Introduce new graph helper of_graph_get_remote_node() which will be
   used by DRM drivers in 4.12.
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJYrcjTEBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcOPjg/8
 CZgxb3humk7Kkt+I3IsZCxsXhgdk2+CPfCSHlK1bc5Jqg0TzepQvFt4ZkuRHkZy/
 pQLUpRnUEUl64aaE8WxZY8ELYZggWazcTnWgCOzvoYpqSD4dAkAsqeti1Qh9PGKz
 fNLnPWREftojFZ7wVQ8btxC1dINc9eC9eEHsIsS8S8UIgLgv/aN6PeG1Ll/UUa9d
 u9orY3lxrz8JvdZslGtd1XLZqehIG0AAXqYRasyKl6Sc1NgjdwJTrqoeHEnCYaBM
 0+JUOf8kjRa1QNYN4SpuQ1gpovS8tPUGuODrWF2FvaQIxYHTzF8MpLqTvjBzdsj6
 b1owHzMXOLlPqqmmQ+jkHY5phisM4heJCIanNerzfM9+lHvb6kB3EuoTkAGvzsr/
 HCJi/Wk8tVrw6MYdnav0NT6aLIgZmrVspeJKlS1IdIkpsxZ64DsgX/YS/qGn/fcx
 qMrDXh8gMFwJBENRCKmKYFu1kzJkBoVEXtGlIbRQDZwOIuHPJl/ed6naMSfyUmcL
 wEe1I3buyB38FVzUTM2y0K1LfFJSJqOFSWTy5WCcTyP4cbKUyEja8vzN1Cx8BDwf
 wYtGWQQcg1Pyo074De6ojXWPiiW8f64GLLjqPALjA+J6JtZY5PwAnGXV+1ZYgX+V
 hV+kXbS4UIjN1koxroJ7ahfouWdOignmpwdvomQPLG8=
 =D/BO
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:
 "Pretty standard stuff with dtc upstream sync being the biggest piece.

   - Sync dtc to upstream commit 0931cea3ba20. This picks up overlay
     support in dtc.

   - Set dma_ops for reserved memory users.

   - Make references to IOMMU consistent in DT bindings.

   - Cleanup references to pm_power_off in bindings.

   - Move some display bindings that snuck into the old bindings/video/
     path.

   - Fix some wrong documentation paths caused from binding
     restructuring.

   - Vendor prefixes for Faraday and Fujitsu.

   - Fix an of_node ref counting leak in of_find_node_opts_by_path

   - Introduce new graph helper of_graph_get_remote_node() which will be
     used by DRM drivers in 4.12"

* tag 'devicetree-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (27 commits)
  DT: add Faraday Tec. as vendor
  of: introduce of_graph_get_remote_node
  of: Add missing space at end of pr_fmt().
  of: make of_device_make_bus_id() static
  of: fix of_node leak caused in of_find_node_opts_by_path
  dt-bindings: net: remove reference to fixed link support
  dt-bindings: power: reset: qnap-poweroff: Drop reference to pm_power_off
  dt-bindings: power: reset: gpio-poweroff: Drop reference to pm_power_off
  dt-bindings: mfd: as3722: Drop reference to pm_power_off
  dt-bindings: display: move ANX7814 and SiI8620 bridge bindings
  of/unittest: Swap arguments of of_unittest_apply_overlay()
  Documentation: usb: fix wrong documentation paths
  serial: fsl-imx-uart.txt: Remove generic property
  devicetree: Add Fujitsu Ltd. vendor prefix
  Documentation: display: fix wrong documentation paths
  of: remove redundant memset in overlay
  bus:qcom : Fix typo in qcom,ebi2.txt
  dt-bindings: qman: Remove pool channel node
  Documentation: panel-dpi: fix path to display-timing.txt
  devicetree: bindings: clk: mvebu: fix description for sata1 on Armada XP
  ...
2017-02-22 19:23:14 -08:00
Linus Torvalds ca78d3173c arm64 updates for 4.11:
- Errata workarounds for Qualcomm's Falkor CPU
 - Qualcomm L2 Cache PMU driver
 - Qualcomm SMCCC firmware quirk
 - Support for DEBUG_VIRTUAL
 - CPU feature detection for userspace via MRS emulation
 - Preliminary work for the Statistical Profiling Extension
 - Misc cleanups and non-critical fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCgAGBQJYpIxqAAoJELescNyEwWM0xdwH/AsTYAXPZDMdRnrQUyV0Fd2H
 /9pMzww6dHXEmCMKkImf++otUD6S+gTCJTsj7kEAXT5sZzLk27std5lsW7R9oPjc
 bGQMalZy+ovLR1gJ6v072seM3In4xph/qAYOpD8Q0AfYCLHjfMMArQfoLa8Esgru
 eSsrAgzVAkrK7XHi3sYycUjr9Hac9tvOOuQ3SaZkDz4MfFIbI4b43+c1SCF7wgT9
 tQUHLhhxzGmgxjViI2lLYZuBWsIWsE+algvOe1qocvA9JEIXF+W8NeOuCjdL8WwX
 3aoqYClC+qD/9+/skShFv5gM5fo0/IweLTUNIHADXpB6OkCYDyg+sxNM+xnEWQU=
 =YrPg
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
 - Errata workarounds for Qualcomm's Falkor CPU
 - Qualcomm L2 Cache PMU driver
 - Qualcomm SMCCC firmware quirk
 - Support for DEBUG_VIRTUAL
 - CPU feature detection for userspace via MRS emulation
 - Preliminary work for the Statistical Profiling Extension
 - Misc cleanups and non-critical fixes

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (74 commits)
  arm64/kprobes: consistently handle MRS/MSR with XZR
  arm64: cpufeature: correctly handle MRS to XZR
  arm64: traps: correctly handle MRS/MSR with XZR
  arm64: ptrace: add XZR-safe regs accessors
  arm64: include asm/assembler.h in entry-ftrace.S
  arm64: fix warning about swapper_pg_dir overflow
  arm64: Work around Falkor erratum 1003
  arm64: head.S: Enable EL1 (host) access to SPE when entered at EL2
  arm64: arch_timer: document Hisilicon erratum 161010101
  arm64: use is_vmalloc_addr
  arm64: use linux/sizes.h for constants
  arm64: uaccess: consistently check object sizes
  perf: add qcom l2 cache perf events driver
  arm64: remove wrong CONFIG_PROC_SYSCTL ifdef
  ARM: smccc: Update HVC comment to describe new quirk parameter
  arm64: do not trace atomic operations
  ACPI/IORT: Fix the error return code in iort_add_smmu_platform_device()
  ACPI/IORT: Fix iort_node_get_id() mapping entries indexing
  arm64: mm: enable CONFIG_HOLES_IN_ZONE for NUMA
  perf: xgene: Include module.h
  ...
2017-02-22 10:46:44 -08:00
Rob Herring b85ad49409 of: introduce of_graph_get_remote_node
The OF graph API leaves too much of the graph walking to clients when
in many cases the driver doesn't care about accessing the port or
endpoint nodes. The drivers typically just want the device connected via
a particular graph connection. of_graph_get_remote_node provides this
functionality.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-02-15 08:53:32 -06:00
Qi Hou 0549bde0fc of: fix of_node leak caused in of_find_node_opts_by_path
During stepping down the tree, parent node is gotten first and its refcount is
increased with of_node_get() in __of_get_next_child(). Since it just being used
as tmp node, its refcount must be decreased with of_node_put() after traversing
its child nodes.

Or, its refcount will never be descreased to ZERO, then it will never be freed,
as well as other related memory blocks.

To fix this, decrease refcount of parent with of_node_put() after
__of_find_node_by_path().

Signed-off-by: Qi Hou <qi.hou@windriver.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-02-09 09:11:30 -06:00
Sudeep Holla 5fa23530d4 of: base: add support to find the level of the last cache
It is useful to have helper function just to get the number of cache
levels for a given logical cpu. We can obtain the same by just checking
the level at which the last cache is present. This patch adds support
to find the level of the last cache for a given cpu.

It will be used on ARM64 platform where the device tree provides the
information for the additional non-architected/transparent/external
last level caches that are not integrated with the processors.

Cc: Mark Rutland <mark.rutland@arm.com>
Suggested-by: Rob Herring <robh+dt@kernel.org>
Acked-by: Rob Herring <robh+dt@kernel.org>
Tested-by: Tan Xiaojun <tanxiaojun@huawei.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
[will: use u32 instead of int for cache_level]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-01-17 12:09:33 +00:00
Paul Burton de96ec2a77 OF: Prevent unaligned access in of_alias_scan()
When allocating a struct alias_prop, of_alias_scan() only requested that
it be aligned on a 4 byte boundary. The struct contains pointers which
leads to us attempting 64 bit writes on 64 bit systems, and if the CPU
doesn't support unaligned memory accesses then this causes problems -
for example on some MIPS64r2 CPUs including the "mips64r2-generic" QEMU
emulated CPU it will trigger an address error exception.

Fix this by requesting alignment for the struct alias_prop allocation
matching that which the compiler expects, using the __alignof__ keyword.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14306/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03 16:34:48 +01:00
Linus Torvalds 6df8b74b17 DeviceTree updates for 4.10:
- Add various vendor prefixes.
 
 - Fix NUMA node handling when "numa=off" is passed on kernel command
   line.
 
 - Coding style Clean-up of overlay handling code.
 
 - DocBook fixes in DT platform driver code
 
 - Altera SoCFPGA binding addtions for freeze bridge, arria10 FPGA
   manager and FPGA bridges.
 
 - Couple of printk message fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJYUqo6EBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcMHiw//
 WIJH6XF8PkAEkITxChwb3kJ1y7PCtR7YmncMvnMRh9kIcyPwFjiDRqUz/0MiTHgD
 UJsFtX6057GWDd0mlUrQ8iFFlzdGLl2Xw4u6sr4bC7bGVK0Nj9QX+xrFmXCLtGj0
 wYkXIJXDXmLQJPKhG5np5jBYfJIaYr5FcNCwdOEljDDauHAg6f2hvgOby1X8FCOS
 oC3LCqvx4SWp9EcQAvOkKAJazsIlSAynb7EFwTaKo0RHJPzX/Uhp7RmyvAgeVZVE
 a2GS+YwboD3PMa7cjC3R7FwBXhuM/YQLLWfgSGwvr8nADP4a/iZNzJt1H0rU1LKP
 ukgSP5m58bt713H7Gr6OJ1ygAFmvFAzye+mXwHVxwqg3BFp141LCKoD0A2RO+zH8
 5cma2OTl9bQSWxtKJyLm4y9/QegaThyM/eZyk5j6XOjIEtlTS0h8H3ZHbU55k1HC
 7MJrnoAb3z5vGhxPplF1MOeGswz5vLME0e74Po0Nt8X7sdpj7zVWBL8AZh+Xyw2O
 d6oz9xYQVgJ5mqnnXXTWSqNfTM82+aUZV6SREaOJ1GjSy3pfd2s85N1oB8oIOb+o
 gRNYibbv/EvaOBqADwQoRWRTIW+0Vtf/vY1xVFB6Wd8XO2a/dmHZJ95jaPlAfwf3
 l5EqgsHP1kirkNYgCAUSpCkPf61gA+ZAWxjlfrARmCg=
 =1Sex
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:

 - add various vendor prefixes.

 - fix NUMA node handling when "numa=off" is passed on kernel command
   line.

 - coding style Clean-up of overlay handling code.

 - DocBook fixes in DT platform driver code

 - Altera SoCFPGA binding addtions for freeze bridge, arria10 FPGA
   manager and FPGA bridges.

 - a couple of printk message fixes.

* tag 'devicetree-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (33 commits)
  dt: pwm: bcm2835: fix typo in clocks property name
  devicetree: add vendor prefix for National Instruments
  Revert "of: base: add support to get machine model name"
  of: Fix issue where code would fall through to error case.
  drivers/of: fix missing pr_cont()s in of_print_phandle_args
  devicetree: bindings: Add vendor prefix for Oki
  devicetree: bindings: Add vendor prefix for Andes Technology Corporation
  dt-bindings: add MYIR Tech hardware vendor prefix
  add bindings document for altera freeze bridge
  ARM: socfpga: add bindings doc for arria10 fpga manager
  ARM: socfpga: add bindings document for fpga bridge drivers
  of: base: add support to get machine model name
  of/platform: clarify of_find_device_by_node refcounting
  of/platform: fix of_platform_device_destroy comment
  of: Remove unused variable overlay_symbols
  of: Move setting of pointer to beside test for non-null
  of: Add back an error message, restructured
  of: Update comments to reflect changes and increase clarity
  of: Remove redundant size check
  of: Update structure of code to be clearer, also remove BUG_ON()
  ...
2016-12-15 11:49:41 -08:00
Rob Herring 0a8b13eab1 Revert "of: base: add support to get machine model name"
This reverts commit e5269794d2.
2016-12-09 10:33:48 -06:00
Marcin Nowakowski 4aa6634440 drivers/of: fix missing pr_cont()s in of_print_phandle_args
Since the KERN_CONT changes, the current debug printks have a lot of
empty lines making the log messages very hard to read.

Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-12-09 10:32:40 -06:00
Sudeep Holla e5269794d2 of: base: add support to get machine model name
Currently platforms/drivers needing to get the machine model name are
replicating the same snippet of code. In some case, the OF reference
counting is either missing or incorrect.

This patch adds support to read the machine model name either using
the "model" or the "compatible" property in the device tree root node
to the core OF/DT code.

This can be used to remove all the duplicate code snippets doing exactly
same thing later.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-18 08:46:22 -06:00
Hans de Goede c6c7d83b9c Revert "console: don't prefer first registered if DT specifies stdout-path"
This reverts commit 05fd007e46 ("console: don't prefer first
registered if DT specifies stdout-path").

The reverted commit changes existing behavior on which many ARM boards
rely.  Many ARM small-board-computers, like e.g.  the Raspberry Pi have
both a video output and a serial console.  Depending on whether the user
is using the device as a more regular computer; or as a headless device
we need to have the console on either one or the other.

Many users rely on the kernel behavior of the console being present on
both outputs, before the reverted commit the console setup with no
console= kernel arguments on an ARM board which sets stdout-path in dt
would look like this:

  [root@localhost ~]# cat /proc/consoles
  ttyS0                -W- (EC p a)    4:64
  tty0                 -WU (E  p  )    4:1

Where as after the reverted commit, it looks like this:

  [root@localhost ~]# cat /proc/consoles
  ttyS0                -W- (EC p a)    4:64

This commit reverts commit 05fd007e46 ("console: don't prefer first
registered if DT specifies stdout-path") restoring the original
behavior.

Fixes: 05fd007e46 ("console: don't prefer first registered if DT specifies stdout-path")
Link: http://lkml.kernel.org/r/20161104121135.4780-2-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-11 08:12:37 -08:00
Paul Burton 05fd007e46 console: don't prefer first registered if DT specifies stdout-path
If a device tree specifies a preferred device for kernel console output
via the stdout-path or linux,stdout-path chosen node properties or the
stdout alias then the kernel ought to honor it & output the kernel
console to that device.  As it stands, this isn't the case.  Whilst we
parse the stdout-path properties & set an of_stdout variable from
of_alias_scan(), and use that from of_console_check() to determine
whether to add a console device as a preferred console whilst
registering it, we also prefer the first registered console if no other
has been selected at the time of its registration.

This means that if a console other than the one the device tree selects
via stdout-path is registered first, we will switch to using it & when
the stdout-path console is later registered the call to
add_preferred_console() via of_console_check() is too late to do
anything useful.  In practice this seems to mean that we switch to the
dummy console device fairly early & see no further console output:

    Console: colour dummy device 80x25
    console [tty0] enabled
    bootconsole [ns16550a0] disabled

Fix this by not automatically preferring the first registered console if
one is specified by the device tree.  This allows consoles to be
registered but not enabled, and once the driver for the console selected
by stdout-path calls of_console_check() the driver will be added to the
list of preferred consoles before any other console has been enabled.
When that console is then registered via register_console() it will be
enabled as expected.

Link: http://lkml.kernel.org/r/20160809151937.26118-1-paul.burton@imgtec.com
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ivan Delalande <colona@arista.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jan Kara <jack@suse.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Joe Perches <joe@perches.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:30 -07:00
Richard Fitzgerald a67e9472da of: Add array read functions with min/max size limits
Add a new set of array reading functions that take a minimum and
maximum size limit and will fail if the property size is not within
the size limits. This makes it more convenient for drivers that
use variable-size DT arrays which must be bounded at both ends -
data must be at least N entries but must not overflow the array
it is being copied into. It is also more efficient than making this
functionality out of existing public functions and avoids duplication.

The existing array functions have been left in the API, since there
are a very large number of clients of those functions and their
existing functionality is still useful. This avoids turning a small
API improvement into a major kernel rework.

The old functions have been turned into mininmal static inlines calling
the new functions. The old functions had no upper limit on the actual
size of the dts entry, to preserve this functionality rather than keeping
two near-identical implementations, if the new function is called with
max=0 there is no limit on the size of the dts entry but only the min
number of elements are read.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-09-15 08:33:01 -05:00
Richard Fitzgerald 79ac5d31df of: Make of_find_property_value_of_size take a length range
In preparation for adding variable-length array reads, change
of_find_property_value_of_size so that it takes an optional
maximum length. If the maximum is passed as 0, the behaviour is
unchanged and it will return a property if it's >= the requested
minimum length. If maximum is non-zero it will only return a
property whose length is min <= l <= max.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-09-15 08:32:57 -05:00
Lucas Stach 34276bb062 of: fix reference counting in of_graph_get_endpoint_by_regs
The called of_graph_get_next_endpoint() already decrements the refcount
of the prev node, so it is wrong to do it again in the calling function.

Use the for_each_endpoint_of_node() helper to interate through the
endpoint OF nodes, which already does the right thing and simplifies
the code a bit.

Fixes: 8ccd0d0ca0
(of: add helper for getting endpoint node of specific identifiers)
Cc: stable@vger.kernel.org
Reported-by: David Jander <david@protonic.nl>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-08-15 11:15:05 -05:00
Markus Elfring beab47d55b of: Delete an unnecessary check before the function call "of_node_put"
The of_node_put() function tests whether its argument is NULL
and then returns immediately.
Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-08-09 12:36:27 -05:00
Linus Torvalds bad60e6f25 powerpc updates for 4.8 # 1
Highlights:
  - PowerNV PCI hotplug support.
  - Lots more Power9 support.
  - eBPF JIT support on ppc64le.
  - Lots of cxl updates.
  - Boot code consolidation.
 
 Bug fixes:
  - Fix spin_unlock_wait() from Boqun Feng
  - Fix stack pointer corruption in __tm_recheckpoint() from Michael Neuling
  - Fix multiple bugs in memory_hotplug_max() from Bharata B Rao
  - mm: Ensure "special" zones are empty from Oliver O'Halloran
  - ftrace: Separate the heuristics for checking call sites from Michael Ellerman
  - modules: Never restore r2 for a mprofile-kernel style mcount() call from Michael Ellerman
  - Fix endianness when reading TCEs from Alexey Kardashevskiy
  - start rtasd before PCI probing from Greg Kurz
  - PCI: rpaphp: Fix slot registration for multiple slots under a PHB from Tyrel Datwyler
  - powerpc/mm: Add memory barrier in __hugepte_alloc() from Sukadev Bhattiprolu
 
 Cleanups & fixes:
  - Drop support for MPIC in pseries from Rashmica Gupta
  - Define and use PPC64_ELF_ABI_v2/v1 from Michael Ellerman
  - Remove unused symbols in asm-offsets.c from Rashmica Gupta
  - Fix SRIOV not building without EEH enabled from Russell Currey
  - Remove kretprobe_trampoline_holder. from Thiago Jung Bauermann
  - Reduce log level of PCI I/O space warning from Benjamin Herrenschmidt
  - Add array bounds checking to crash_shutdown_handlers from Suraj Jitindar Singh
  - Avoid -maltivec when using clang integrated assembler from Anton Blanchard
  - Fix array overrun in ppc_rtas() syscall from Andrew Donnellan
  - Fix error return value in cmm_mem_going_offline() from Rasmus Villemoes
  - export cpu_to_core_id() from Mauricio Faria de Oliveira
  - Remove old symbols from defconfigs from Andrew Donnellan
  - Update obsolete comments in setup_32.c about entry conditions from Benjamin Herrenschmidt
  - Add comment explaining the purpose of setup_kdump_trampoline() from Benjamin Herrenschmidt
  - Merge the RELOCATABLE config entries for ppc32 and ppc64 from Kevin Hao
  - Remove RELOCATABLE_PPC32 from Kevin Hao
  - Fix .long's in tlb-radix.c to more meaningful from Balbir Singh
 
 Minor cleanups & fixes:
  - Andrew Donnellan, Anna-Maria Gleixner, Anton Blanchard, Benjamin
    Herrenschmidt, Bharata B Rao, Christophe Leroy, Colin Ian King, Geliang
    Tang, Greg Kurz, Madhavan Srinivasan, Michael Ellerman, Michael Ellerman,
    Stephen Rothwell, Stewart Smith.
 
 Freescale updates from Scott:
  - "Highlights include more 8xx optimizations, device tree updates,
    and MVME7100 support."
 
 PowerNV PCI hotplug from Gavin Shan:
  - PCI: Add pcibios_setup_bridge()
  - Override pcibios_setup_bridge()
  - Remove PCI_RESET_DELAY_US
  - Move pnv_pci_ioda_setup_opal_tce_kill() around
  - Increase PE# capacity
  - Allocate PE# in reverse order
  - Create PEs in pcibios_setup_bridge()
  - Setup PE for root bus
  - Extend PCI bridge resources
  - Make pnv_ioda_deconfigure_pe() visible
  - Dynamically release PE
  - Update bridge windows on PCI plug
  - Delay populating pdn
  - Support PCI slot ID
  - Use PCI slot reset infrastructure
  - Introduce pnv_pci_get_slot_id()
  - Functions to get/set PCI slot state
  - PCI/hotplug: PowerPC PowerNV PCI hotplug driver
  - Print correct PHB type names
 
 Power9 idle support from Shreyas B. Prabhu:
  - set power_save func after the idle states are initialized
  - Use PNV_THREAD_WINKLE macro while requesting for winkle
  - make hypervisor state restore a function
  - Rename idle_power7.S to idle_book3s.S
  - Rename reusable idle functions to hardware agnostic names
  - Make pnv_powersave_common more generic
  - abstraction for saving SPRs before entering deep idle states
  - Add platform support for stop instruction
  - cpuidle/powernv: Use CPUIDLE_STATE_MAX instead of MAX_POWERNV_IDLE_STATES
  - cpuidle/powernv: cleanup cpuidle-powernv.c
  - cpuidle/powernv: Add support for POWER ISA v3 idle states
  - Use deepest stop state when cpu is offlined
 
 Power9 PMU from Madhavan Srinivasan:
  - factor out power8 pmu macros and defines
  - factor out power8 pmu functions
  - factor out power8 __init_pmu code
  - Add power9 event list macros for generic and cache events
  - Power9 PMU support
  - Export Power9 generic and cache events to sysfs
 
 Power9 preliminary interrupt & PCI support from Benjamin Herrenschmidt:
  - Add XICS emulation APIs
  - Move a few exception common handlers to make room
  - Add support for HV virtualization interrupts
  - Add mechanism to force a replay of interrupts
  - Add ICP OPAL backend
  - Discover IODA3 PHBs
  - pci: Remove obsolete SW invalidate
  - opal: Add real mode call wrappers
  - Rename TCE invalidation calls
  - Remove SWINV constants and obsolete TCE code
  - Rework accessing the TCE invalidate register
  - Fallback to OPAL for TCE invalidations
  - Use the device-tree to get available range of M64's
  - Check status of a PHB before using it
  - pci: Don't try to allocate resources that will be reassigned
 
 Other Power9:
  - Send SIGBUS on unaligned copy and paste from Chris Smart
  - Large Decrementer support from Oliver O'Halloran
  - Load Monitor Register Support from Jack Miller
 
 Performance improvements from Anton Blanchard:
  - Avoid load hit store in __giveup_fpu() and __giveup_altivec()
  - Avoid load hit store in setup_sigcontext()
  - Remove assembly versions of strcpy, strcat, strlen and strcmp
  - Align hot loops of some string functions
 
 eBPF JIT from Naveen N. Rao:
  - Fix/enhance 32-bit Load Immediate implementation
  - Optimize 64-bit Immediate loads
  - Introduce rotate immediate instructions
  - A few cleanups
  - Isolate classic BPF JIT specifics into a separate header
  - Implement JIT compiler for extended BPF
 
 Operator Panel driver from Suraj Jitindar Singh:
  - devicetree/bindings: Add binding for operator panel on FSP machines
  - Add inline function to get rc from an ASYNC_COMP opal_msg
  - Add driver for operator panel on FSP machines
 
 Sparse fixes from Daniel Axtens:
  - make some things static
  - Introduce asm-prototypes.h
  - Include headers containing prototypes
  - Use #ifdef __BIG_ENDIAN__ #else for REG_BYTE
  - kvm: Clarify __user annotations
  - Pass endianness to sparse
  - Make ppc_md.{halt, restart} __noreturn
 
 MM fixes & cleanups from Aneesh Kumar K.V:
  - radix: Update LPCR HR bit as per ISA
  - use _raw variant of page table accessors
  - Compile out radix related functions if RADIX_MMU is disabled
  - Clear top 16 bits of va only on older cpus
  - Print formation regarding the the MMU mode
  - hash: Update SDR1 size encoding as documented in ISA 3.0
  - radix: Update PID switch sequence
  - radix: Update machine call back to support new HCALL.
  - radix: Add LPID based tlb flush helpers
  - radix: Add a kernel command line to disable radix
  - Cleanup LPCR defines
 
 Boot code consolidation from Benjamin Herrenschmidt:
  - Move epapr_paravirt_early_init() to early_init_devtree()
  - cell: Don't use flat device-tree after boot
  - ge_imp3a: Don't use the flat device-tree after boot
  - mpc85xx_ds: Don't use the flat device-tree after boot
  - mpc85xx_rdb: Don't use the flat device-tree after boot
  - Don't test for machine type in rtas_initialize()
  - Don't test for machine type in smp_setup_cpu_maps()
  - dt: Add of_device_compatible_match()
  - Factor do_feature_fixup calls
  - Move 64-bit feature fixup earlier
  - Move 64-bit memory reserves to setup_arch()
  - Use a cachable DART
  - Move FW feature probing out of pseries probe()
  - Put exception configuration in a common place
  - Remove early allocation of the SMU command buffer
  - Move MMU backend selection out of platform code
  - pasemi: Remove IOBMAP allocation from platform probe()
  - mm/hash: Don't use machine_is() early during boot
  - Don't test for machine type to detect HEA special case
  - pmac: Remove spurrious machine type test
  - Move hash table ops to a separate structure
  - Ensure that ppc_md is empty before probing for machine type
  - Move 64-bit probe_machine() to later in the boot process
  - Move 32-bit probe() machine to later in the boot process
  - Get rid of ppc_md.init_early()
  - Move the boot time info banner to a separate function
  - Move setting of {i,d}cache_bsize to initialize_cache_info()
  - Move the content of setup_system() to setup_arch()
  - Move cache info inits to a separate function
  - Re-order the call to smp_setup_cpu_maps()
  - Re-order setup_panic()
  - Make a few boot functions __init
  - Merge 32-bit and 64-bit setup_arch()
 
 Other new features:
  - tty/hvc: Use IRQF_SHARED for OPAL hvc consoles from Sam Mendoza-Jonas
  - tty/hvc: Use opal irqchip interface if available from Sam Mendoza-Jonas
  - powerpc: Add module autoloading based on CPU features from Alastair D'Silva
  - crypto: vmx - Convert to CPU feature based module autoloading from Alastair D'Silva
  - Wake up kopald polling thread before waiting for events from Benjamin Herrenschmidt
  - xmon: Dump ISA 2.06 SPRs from Michael Ellerman
  - xmon: Dump ISA 2.07 SPRs from Michael Ellerman
  - Add a parameter to disable 1TB segs from Oliver O'Halloran
  - powerpc/boot: Add OPAL console to epapr wrappers from Oliver O'Halloran
  - Assign fixed PHB number based on device-tree properties from Guilherme G. Piccoli
  - pseries: Add pseries hotplug workqueue from John Allen
  - pseries: Add support for hotplug interrupt source from John Allen
  - pseries: Use kernel hotplug queue for PowerVM hotplug events from John Allen
  - pseries: Move property cloning into its own routine from Nathan Fontenot
  - pseries: Dynamic add entires to associativity lookup array from Nathan Fontenot
  - pseries: Auto-online hotplugged memory from Nathan Fontenot
  - pseries: Remove call to memblock_add() from Nathan Fontenot
 
 cxl:
  - Add set and get private data to context struct from Michael Neuling
  - make base more explicitly non-modular from Paul Gortmaker
  - Use for_each_compatible_node() macro from Wei Yongjun
  - Frederic Barrat
    - Abstract the differences between the PSL and XSL
    - Make vPHB device node match adapter's
  - Philippe Bergheaud
    - Add mechanism for delivering AFU driver specific events
    - Ignore CAPI adapters misplaced in switched slots
    - Refine slice error debug messages
  - Andrew Donnellan
    - static-ify variables to fix sparse warnings
    - PCI/hotplug: pnv_php: export symbols and move struct types needed by cxl
    - PCI/hotplug: pnv_php: handle OPAL_PCI_SLOT_OFFLINE power state
    - Add cxl_check_and_switch_mode() API to switch bi-modal cards
    - remove dead Kconfig options
    - fix potential NULL dereference in free_adapter()
  - Ian Munsie
    - Update process element after allocating interrupts
    - Add support for CAPP DMA mode
    - Fix allowing bogus AFU descriptors with 0 maximum processes
    - Fix allocating a minimum of 2 pages for the SPA
    - Fix bug where AFU disable operation had no effect
    - Workaround XSL bug that does not clear the RA bit after a reset
    - Fix NULL pointer dereference on kernel contexts with no AFU interrupts
    - powerpc/powernv: Split cxl code out into a separate file
    - Add cxl_slot_is_supported API
    - Enable bus mastering for devices using CAPP DMA mode
    - Move cxl_afu_get / cxl_afu_put to base
    - Allow a default context to be associated with an external pci_dev
    - Do not create vPHB if there are no AFU configuration records
    - powerpc/powernv: Add support for the cxl kernel api on the real phb
    - Add support for using the kernel API with a real PHB
    - Add kernel APIs to get & set the max irqs per context
    - Add preliminary workaround for CX4 interrupt limitation
    - Add support for interrupts on the Mellanox CX4
    - Workaround PE=0 hardware limitation in Mellanox CX4
    - powerpc/powernv: Fix pci-cxl.c build when CONFIG_MODULES=n
 
 selftests:
  - Test unaligned copy and paste from Chris Smart
  - Load Monitor Register Tests from Jack Miller
  - Cyril Bur
    - exec() with suspended transaction
    - Use signed long to read perf_event_paranoid
    - Fix usage message in context_switch
    - Fix generation of vector instructions/types in context_switch
  - Michael Ellerman
    - Use "Delta" rather than "Error" in normal output
    - Import Anton's mmap & futex micro benchmarks
    - Add a test for PROT_SAO
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXnWchAAoJEFHr6jzI4aWAe64P/36Vd9yJLptjkoyZp8/IQtu1
 Cv8buQwGdKuSMzdkcUAOXcC3fe2u70ZWXMKKLfY3koIV1IAiqdWk5/XWRKMP2XmE
 dG0LhSf0uu7uh+mE0WvQnRu46ImeKtQ+mPp4Hbs/s9SxMSeYjruv3vdWWmgUq0cl
 Gac2qJSRtAMmgLuHWMjf7N5mxOTOnKejU4o2i9cJ+YHmWKOdCigv2Ge1UadOQFlC
 E7tRPiUR3asfDfj+e+LVTTdToH6p8pk+mOUzIoZ8jIkQ+IXzi62UDl5+Rw9mqiuX
 1CtqEMUXxo2qwX+d4TcV/QUOp0YKPuIcUZ9NMMS+S3lOyJ4NFt+j2Izk7QJp5kNP
 gKVqB68TjDQsBuDr3P9ynlHbduxTIhZAqopbTrLe0FIg48nUe4n1yHJBVzqaVajX
 rFBJSsSUffBLAARNPSXJJhIgc2C1/qOC8dgMeDMcR2kPirDHaQZ/lY1yEpq1yiqR
 q6e3v5hvIAm4IjbYk0mF7TUxBrPGVE/ExyBINyASRoYxAJ1PyeD/iljZ9vI3asRA
 s+hhxT8H3f7lnqTrmJqMjHgAdGkmag07EdmvFNX4xK4aADSy7Y6g4dw25ffRopo9
 p9Jf9HX+dZv65Y3UjbV/6HuXcaSEBJJLSVWvii65PebqSN0LuHEFvNeIJ6Iblx0B
 AWh/hd0Iin2gdkcG39Mr
 =Z5kM
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Highlights:
   - PowerNV PCI hotplug support.
   - Lots more Power9 support.
   - eBPF JIT support on ppc64le.
   - Lots of cxl updates.
   - Boot code consolidation.

  Bug fixes:
   - Fix spin_unlock_wait() from Boqun Feng
   - Fix stack pointer corruption in __tm_recheckpoint() from Michael
     Neuling
   - Fix multiple bugs in memory_hotplug_max() from Bharata B Rao
   - mm: Ensure "special" zones are empty from Oliver O'Halloran
   - ftrace: Separate the heuristics for checking call sites from
     Michael Ellerman
   - modules: Never restore r2 for a mprofile-kernel style mcount() call
     from Michael Ellerman
   - Fix endianness when reading TCEs from Alexey Kardashevskiy
   - start rtasd before PCI probing from Greg Kurz
   - PCI: rpaphp: Fix slot registration for multiple slots under a PHB
     from Tyrel Datwyler
   - powerpc/mm: Add memory barrier in __hugepte_alloc() from Sukadev
     Bhattiprolu

  Cleanups & fixes:
   - Drop support for MPIC in pseries from Rashmica Gupta
   - Define and use PPC64_ELF_ABI_v2/v1 from Michael Ellerman
   - Remove unused symbols in asm-offsets.c from Rashmica Gupta
   - Fix SRIOV not building without EEH enabled from Russell Currey
   - Remove kretprobe_trampoline_holder from Thiago Jung Bauermann
   - Reduce log level of PCI I/O space warning from Benjamin
     Herrenschmidt
   - Add array bounds checking to crash_shutdown_handlers from Suraj
     Jitindar Singh
   - Avoid -maltivec when using clang integrated assembler from Anton
     Blanchard
   - Fix array overrun in ppc_rtas() syscall from Andrew Donnellan
   - Fix error return value in cmm_mem_going_offline() from Rasmus
     Villemoes
   - export cpu_to_core_id() from Mauricio Faria de Oliveira
   - Remove old symbols from defconfigs from Andrew Donnellan
   - Update obsolete comments in setup_32.c about entry conditions from
     Benjamin Herrenschmidt
   - Add comment explaining the purpose of setup_kdump_trampoline() from
     Benjamin Herrenschmidt
   - Merge the RELOCATABLE config entries for ppc32 and ppc64 from Kevin
     Hao
   - Remove RELOCATABLE_PPC32 from Kevin Hao
   - Fix .long's in tlb-radix.c to more meaningful from Balbir Singh

  Minor cleanups & fixes:
   - Andrew Donnellan, Anna-Maria Gleixner, Anton Blanchard, Benjamin
     Herrenschmidt, Bharata B Rao, Christophe Leroy, Colin Ian King,
     Geliang Tang, Greg Kurz, Madhavan Srinivasan, Michael Ellerman,
     Michael Ellerman, Stephen Rothwell, Stewart Smith.

  Freescale updates from Scott:
   - "Highlights include more 8xx optimizations, device tree updates,
     and MVME7100 support."

  PowerNV PCI hotplug from Gavin Shan:
   - PCI: Add pcibios_setup_bridge()
   - Override pcibios_setup_bridge()
   - Remove PCI_RESET_DELAY_US
   - Move pnv_pci_ioda_setup_opal_tce_kill() around
   - Increase PE# capacity
   - Allocate PE# in reverse order
   - Create PEs in pcibios_setup_bridge()
   - Setup PE for root bus
   - Extend PCI bridge resources
   - Make pnv_ioda_deconfigure_pe() visible
   - Dynamically release PE
   - Update bridge windows on PCI plug
   - Delay populating pdn
   - Support PCI slot ID
   - Use PCI slot reset infrastructure
   - Introduce pnv_pci_get_slot_id()
   - Functions to get/set PCI slot state
   - PCI/hotplug: PowerPC PowerNV PCI hotplug driver
   - Print correct PHB type names

  Power9 idle support from Shreyas B. Prabhu:
   - set power_save func after the idle states are initialized
   - Use PNV_THREAD_WINKLE macro while requesting for winkle
   - make hypervisor state restore a function
   - Rename idle_power7.S to idle_book3s.S
   - Rename reusable idle functions to hardware agnostic names
   - Make pnv_powersave_common more generic
   - abstraction for saving SPRs before entering deep idle states
   - Add platform support for stop instruction
   - cpuidle/powernv: Use CPUIDLE_STATE_MAX instead of MAX_POWERNV_IDLE_STATES
   - cpuidle/powernv: cleanup cpuidle-powernv.c
   - cpuidle/powernv: Add support for POWER ISA v3 idle states
   - Use deepest stop state when cpu is offlined

  Power9 PMU from Madhavan Srinivasan:
   - factor out power8 pmu macros and defines
   - factor out power8 pmu functions
   - factor out power8 __init_pmu code
   - Add power9 event list macros for generic and cache events
   - Power9 PMU support
   - Export Power9 generic and cache events to sysfs

  Power9 preliminary interrupt & PCI support from Benjamin Herrenschmidt:
   - Add XICS emulation APIs
   - Move a few exception common handlers to make room
   - Add support for HV virtualization interrupts
   - Add mechanism to force a replay of interrupts
   - Add ICP OPAL backend
   - Discover IODA3 PHBs
   - pci: Remove obsolete SW invalidate
   - opal: Add real mode call wrappers
   - Rename TCE invalidation calls
   - Remove SWINV constants and obsolete TCE code
   - Rework accessing the TCE invalidate register
   - Fallback to OPAL for TCE invalidations
   - Use the device-tree to get available range of M64's
   - Check status of a PHB before using it
   - pci: Don't try to allocate resources that will be reassigned

  Other Power9:
   - Send SIGBUS on unaligned copy and paste from Chris Smart
   - Large Decrementer support from Oliver O'Halloran
   - Load Monitor Register Support from Jack Miller

  Performance improvements from Anton Blanchard:
   - Avoid load hit store in __giveup_fpu() and __giveup_altivec()
   - Avoid load hit store in setup_sigcontext()
   - Remove assembly versions of strcpy, strcat, strlen and strcmp
   - Align hot loops of some string functions

  eBPF JIT from Naveen N. Rao:
   - Fix/enhance 32-bit Load Immediate implementation
   - Optimize 64-bit Immediate loads
   - Introduce rotate immediate instructions
   - A few cleanups
   - Isolate classic BPF JIT specifics into a separate header
   - Implement JIT compiler for extended BPF

  Operator Panel driver from Suraj Jitindar Singh:
   - devicetree/bindings: Add binding for operator panel on FSP machines
   - Add inline function to get rc from an ASYNC_COMP opal_msg
   - Add driver for operator panel on FSP machines

  Sparse fixes from Daniel Axtens:
   - make some things static
   - Introduce asm-prototypes.h
   - Include headers containing prototypes
   - Use #ifdef __BIG_ENDIAN__ #else for REG_BYTE
   - kvm: Clarify __user annotations
   - Pass endianness to sparse
   - Make ppc_md.{halt, restart} __noreturn

  MM fixes & cleanups from Aneesh Kumar K.V:
   - radix: Update LPCR HR bit as per ISA
   - use _raw variant of page table accessors
   - Compile out radix related functions if RADIX_MMU is disabled
   - Clear top 16 bits of va only on older cpus
   - Print formation regarding the the MMU mode
   - hash: Update SDR1 size encoding as documented in ISA 3.0
   - radix: Update PID switch sequence
   - radix: Update machine call back to support new HCALL.
   - radix: Add LPID based tlb flush helpers
   - radix: Add a kernel command line to disable radix
   - Cleanup LPCR defines

  Boot code consolidation from Benjamin Herrenschmidt:
   - Move epapr_paravirt_early_init() to early_init_devtree()
   - cell: Don't use flat device-tree after boot
   - ge_imp3a: Don't use the flat device-tree after boot
   - mpc85xx_ds: Don't use the flat device-tree after boot
   - mpc85xx_rdb: Don't use the flat device-tree after boot
   - Don't test for machine type in rtas_initialize()
   - Don't test for machine type in smp_setup_cpu_maps()
   - dt: Add of_device_compatible_match()
   - Factor do_feature_fixup calls
   - Move 64-bit feature fixup earlier
   - Move 64-bit memory reserves to setup_arch()
   - Use a cachable DART
   - Move FW feature probing out of pseries probe()
   - Put exception configuration in a common place
   - Remove early allocation of the SMU command buffer
   - Move MMU backend selection out of platform code
   - pasemi: Remove IOBMAP allocation from platform probe()
   - mm/hash: Don't use machine_is() early during boot
   - Don't test for machine type to detect HEA special case
   - pmac: Remove spurrious machine type test
   - Move hash table ops to a separate structure
   - Ensure that ppc_md is empty before probing for machine type
   - Move 64-bit probe_machine() to later in the boot process
   - Move 32-bit probe() machine to later in the boot process
   - Get rid of ppc_md.init_early()
   - Move the boot time info banner to a separate function
   - Move setting of {i,d}cache_bsize to initialize_cache_info()
   - Move the content of setup_system() to setup_arch()
   - Move cache info inits to a separate function
   - Re-order the call to smp_setup_cpu_maps()
   - Re-order setup_panic()
   - Make a few boot functions __init
   - Merge 32-bit and 64-bit setup_arch()

  Other new features:
   - tty/hvc: Use IRQF_SHARED for OPAL hvc consoles from Sam Mendoza-Jonas
   - tty/hvc: Use opal irqchip interface if available from Sam Mendoza-Jonas
   - powerpc: Add module autoloading based on CPU features from Alastair D'Silva
   - crypto: vmx - Convert to CPU feature based module autoloading from Alastair D'Silva
   - Wake up kopald polling thread before waiting for events from Benjamin Herrenschmidt
   - xmon: Dump ISA 2.06 SPRs from Michael Ellerman
   - xmon: Dump ISA 2.07 SPRs from Michael Ellerman
   - Add a parameter to disable 1TB segs from Oliver O'Halloran
   - powerpc/boot: Add OPAL console to epapr wrappers from Oliver O'Halloran
   - Assign fixed PHB number based on device-tree properties from Guilherme G. Piccoli
   - pseries: Add pseries hotplug workqueue from John Allen
   - pseries: Add support for hotplug interrupt source from John Allen
   - pseries: Use kernel hotplug queue for PowerVM hotplug events from John Allen
   - pseries: Move property cloning into its own routine from Nathan Fontenot
   - pseries: Dynamic add entires to associativity lookup array from Nathan Fontenot
   - pseries: Auto-online hotplugged memory from Nathan Fontenot
   - pseries: Remove call to memblock_add() from Nathan Fontenot

  cxl:
   - Add set and get private data to context struct from Michael Neuling
   - make base more explicitly non-modular from Paul Gortmaker
   - Use for_each_compatible_node() macro from Wei Yongjun
   - Frederic Barrat
   - Abstract the differences between the PSL and XSL
   - Make vPHB device node match adapter's
   - Philippe Bergheaud
   - Add mechanism for delivering AFU driver specific events
   - Ignore CAPI adapters misplaced in switched slots
   - Refine slice error debug messages
   - Andrew Donnellan
   - static-ify variables to fix sparse warnings
   - PCI/hotplug: pnv_php: export symbols and move struct types needed by cxl
   - PCI/hotplug: pnv_php: handle OPAL_PCI_SLOT_OFFLINE power state
   - Add cxl_check_and_switch_mode() API to switch bi-modal cards
   - remove dead Kconfig options
   - fix potential NULL dereference in free_adapter()
   - Ian Munsie
   - Update process element after allocating interrupts
   - Add support for CAPP DMA mode
   - Fix allowing bogus AFU descriptors with 0 maximum processes
   - Fix allocating a minimum of 2 pages for the SPA
   - Fix bug where AFU disable operation had no effect
   - Workaround XSL bug that does not clear the RA bit after a reset
   - Fix NULL pointer dereference on kernel contexts with no AFU interrupts
   - powerpc/powernv: Split cxl code out into a separate file
   - Add cxl_slot_is_supported API
   - Enable bus mastering for devices using CAPP DMA mode
   - Move cxl_afu_get / cxl_afu_put to base
   - Allow a default context to be associated with an external pci_dev
   - Do not create vPHB if there are no AFU configuration records
   - powerpc/powernv: Add support for the cxl kernel api on the real phb
   - Add support for using the kernel API with a real PHB
   - Add kernel APIs to get & set the max irqs per context
   - Add preliminary workaround for CX4 interrupt limitation
   - Add support for interrupts on the Mellanox CX4
   - Workaround PE=0 hardware limitation in Mellanox CX4
   - powerpc/powernv: Fix pci-cxl.c build when CONFIG_MODULES=n

  selftests:
   - Test unaligned copy and paste from Chris Smart
   - Load Monitor Register Tests from Jack Miller
   - Cyril Bur
   - exec() with suspended transaction
   - Use signed long to read perf_event_paranoid
   - Fix usage message in context_switch
   - Fix generation of vector instructions/types in context_switch
   - Michael Ellerman
   - Use "Delta" rather than "Error" in normal output
   - Import Anton's mmap & futex micro benchmarks
   - Add a test for PROT_SAO"

* tag 'powerpc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (263 commits)
  powerpc/mm: Parenthesise IS_ENABLED() in if condition
  tty/hvc: Use opal irqchip interface if available
  tty/hvc: Use IRQF_SHARED for OPAL hvc consoles
  selftests/powerpc: exec() with suspended transaction
  powerpc: Improve comment explaining why we modify VRSAVE
  powerpc/mm: Drop unused externs for hpte_init_beat[_v3]()
  powerpc/mm: Rename hpte_init_lpar() and move the fallback to a header
  powerpc/mm: Fix build break when PPC_NATIVE=n
  crypto: vmx - Convert to CPU feature based module autoloading
  powerpc: Add module autoloading based on CPU features
  powerpc/powernv/ioda: Fix endianness when reading TCEs
  powerpc/mm: Add memory barrier in __hugepte_alloc()
  powerpc/modules: Never restore r2 for a mprofile-kernel style mcount() call
  powerpc/ftrace: Separate the heuristics for checking call sites
  powerpc: Merge 32-bit and 64-bit setup_arch()
  powerpc/64: Make a few boot functions __init
  powerpc: Re-order setup_panic()
  powerpc: Re-order the call to smp_setup_cpu_maps()
  powerpc/32: Move cache info inits to a separate function
  powerpc/64: Move the content of setup_system() to setup_arch()
  ...
2016-07-30 21:01:36 -07:00
Benjamin Herrenschmidt b9c13fe32f dt: Add of_device_compatible_match()
This provides an equivalent of of_fdt_match() for non-flat trees.

This is more practical than matching an array of of_device_id structs
when converting a bunch of existing users of of_fdt_match().

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-20 14:29:56 +10:00
Rob Herring 606ad42aa3 of: use pr_fmt prefix for all console printing
Clean-up all the DT printk functions to use common pr_fmt prefix.

Some print statements such as kmalloc errors were redundant, so just
drop those.

Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Reviewed-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-07-18 16:57:42 -05:00
Frank Rowand d9fc880723 of: fix memory leak related to safe_name()
Fix a memory leak resulting from memory allocation in safe_name().
This patch fixes all call sites of safe_name().

Mathieu Malaterre reported the memory leak on boot:

On my PowerMac device-tree would generate a duplicate name:

[    0.023043] device-tree: Duplicate name in PowerPC,G4@0, renamed to "l2-cache#1"

in this case a newly allocated name is generated by `safe_name`. However
in this case it is never deallocated.

The bug was found using kmemleak reported as:

unreferenced object 0xdf532e60 (size 32):
  comm "swapper", pid 1, jiffies 4294892300 (age 1993.532s)
  hex dump (first 32 bytes):
    6c 32 2d 63 61 63 68 65 23 31 00 dd e4 dd 1e c2  l2-cache#1......
    ec d4 ba ce 04 ec cc de 8e 85 e9 ca c4 ec cc 9e  ................
  backtrace:
    [<c02d3350>] kvasprintf+0x64/0xc8
    [<c02d3400>] kasprintf+0x4c/0x5c
    [<c0453814>] safe_name.isra.1+0x80/0xc4
    [<c04545d8>] __of_attach_node_sysfs+0x6c/0x11c
    [<c075f21c>] of_core_init+0x8c/0xf8
    [<c0729594>] kernel_init_freeable+0xd4/0x208
    [<c00047e8>] kernel_init+0x24/0x11c
    [<c00158ec>] ret_from_kernel_thread+0x5c/0x64

Link: https://bugzilla.kernel.org/show_bug.cgi?id=120331

Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Reported-by: mathieu.malaterre@gmail.com
Tested-by: Mathieu Malaterre <mathieu.malaterre@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
2016-06-24 15:16:10 -05:00
Linus Torvalds e7f44b65b5 Devicetree for 4.7:
- Rewrite of the unflattening code to avoid recursion and lessen the
   stack usage.
 
 - Rewrite of the phandle args parsing code to get rid of the fixed args
   size. This is needed for IOMMU code.
 
 - Sync to latest dtc which adds more dts style checking. These warnings
   are enabled with "W=1" compiles.
 
 - Tegra documentation updates related to the above warnings.
 
 - A bunch of spelling and other doc fixes.
 
 - Various vendor prefix additions.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXP3OZAAoJEPr7XbWNvGHDEUAQAJLbR9Js7RENPGX/u0NSJNaJ
 yQhyNVsz/BkAWFfWT6YEfyNnDY0UcRs2N9RHb+z65TsX1jvJJxLRDLRfz+rExfiZ
 cA1RJaF77kPOdA0eZapJIzPvAf97Zik+nzKLsqUPUSYaIzghV5rN6aR2AjXN5AYv
 TMQP41NwNQkxfO5I+NOssEB8IBH+DlAzg0LYXw8wNsAJc8o+DgEQjU8cxCqR0NgE
 SbpbJNF8tRXEJckZRC+Q7Gyn2J7VglmM/5VTFbBBwgIly2lcLADPVuX/Z6hZE3OH
 K7mhNWBu61vI5lU6u7q64ePeb63j+Ut/RR0tTPgjsLg0Qg0ue+6iZ66S9ZHEicbU
 wT4A/hjSImvZoQGGMrtUF5HGcaoMHGLGFgFc/Ouox8OQflntQBzuEx/gOQpPXcIT
 vdwITNW8/OGV3rgtmRO9mbdSZiAHPsydoTkIl+Ucod3nTrlEEOwgQARYO+2CfSRj
 sknndj26Kf+0n0tSv2d4JAEdEozp2ZPyfiAfpPXW74jOmOxeswUb3Kxx8YMwhCEl
 +s96rm1vtpNmJzXtuPV3eB0TydWMQ/3NXN6XOS7qEN/5y1AbQqKEoIyJOziBQMxe
 c9Eh/YSjsm4uw3Q0wHOI3s4hTwWfuBmwpIsANJVKrRbftPF58bMUBYU/44ReTtA8
 iMsrqJpnSCcAyS8doWRY
 =s+gW
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:

 - Rewrite of the unflattening code to avoid recursion and lessen the
   stack usage.

 - Rewrite of the phandle args parsing code to get rid of the fixed args
   size.  This is needed for IOMMU code.

 - Sync to latest dtc which adds more dts style checking.  These
   warnings are enabled with "W=1" compiles.

 - Tegra documentation updates related to the above warnings.

 - A bunch of spelling and other doc fixes.

 - Various vendor prefix additions.

* tag 'devicetree-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (52 commits)
  devicetree: Add Creative Technology vendor id
  gpio: dt-bindings: add ibm,ppc4xx-gpio binding
  of/unittest: Remove unnecessary module.h header inclusion
  drivers/of: Fix build warning in populate_node()
  drivers/of: Fix depth when unflattening devicetree
  of: dynamic: changeset prop-update revert fix
  drivers/of: Export of_detach_node()
  drivers/of: Return allocated memory from of_fdt_unflatten_tree()
  drivers/of: Specify parent node in of_fdt_unflatten_tree()
  drivers/of: Rename unflatten_dt_node()
  drivers/of: Avoid recursively calling unflatten_dt_node()
  drivers/of: Split unflatten_dt_node()
  of: include errno.h in of_graph.h
  of: document refcount incrementation of of_get_cpu_node()
  Documentation: dt: soc: fix spelling mistakes
  Documentation: dt: power: fix spelling mistake
  Documentation: dt: pinctrl: fix spelling mistake
  Documentation: dt: opp: fix spelling mistake
  Documentation: dt: net: fix spelling mistakes
  Documentation: dt: mtd: fix spelling mistake
  ...
2016-05-20 14:51:34 -07:00
Suraj Jitindar Singh 201b3fe586 drivers/of: Add check for null property in of_remove_property()
The validity of the property input argument to of_remove_property() is
never checked within the function and thus it is possible to pass a null
value. It happens that this will be picked up in __of_remove_property()
as no matching property of the device node will be found and thus an
error will be returned, however once again there is no explicit check
for a null value. By the time this is detected 2 locks have already been
acquired which is completely unnecessary if the property to remove is
null.

Add an explicit check in the function of_remove_property() for a null
property value and return -ENODEV in this case, this is consistent with
what the previous return value would have been when the null value was
not detected and passed to __of_remove_property().

By moving an explicit check for the property paramenter into the
of_remove_property() function, this will remove the need to perform this
check in calling code before invocation of the of_remove_property()
function.

Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11 21:54:03 +10:00