Commit Graph

4164 Commits

Author SHA1 Message Date
Preeti U Murthy f203891117 ppc/powernv: Set the runlatch bits correctly for offline cpus
Up until now we have been setting the runlatch bits for a busy CPU and
clearing it when a CPU enters idle state. The runlatch bit has thus
been consistent with the utilization of a CPU as long as the CPU is online.

However when a CPU is hotplugged out the runlatch bit is not cleared. It
needs to be cleared to indicate an unused CPU. Hence this patch has the
runlatch bit cleared for an offline CPU just before entering an idle state
and sets it immediately after it exits the idle state.

Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28 16:32:40 +10:00
Li Zhong 42dbfc8649 powerpc/pseries: Protect remove_memory() with device hotplug lock
While testing memory hot-remove, I found following dead lock:

Process #1141 is drmgr, trying to remove some memory, i.e. memory499.
It holds the memory_hotplug_mutex, and blocks when trying to remove file
"online" under dir memory499, in kernfs_drain(), at
        wait_event(root->deactivate_waitq,
                   atomic_read(&kn->active) == KN_DEACTIVATED_BIAS);

Process #1120 is trying to online memory499 by
   echo 1 > memory499/online

In .kernfs_fop_write, it uses kernfs_get_active() to increase
&kn->active, thus blocking process #1141. While itself is blocked later
when trying to acquire memory_hotplug_mutex, which is held by process

The backtrace of both processes are shown below:

[<c000000001b18600>] 0xc000000001b18600
[<c000000000015044>] .__switch_to+0x144/0x200
[<c000000000263ca4>] .online_pages+0x74/0x7b0
[<c00000000055b40c>] .memory_subsys_online+0x9c/0x150
[<c00000000053cbe8>] .device_online+0xb8/0x120
[<c00000000053cd04>] .online_store+0xb4/0xc0
[<c000000000538ce4>] .dev_attr_store+0x64/0xa0
[<c00000000030f4ec>] .sysfs_kf_write+0x7c/0xb0
[<c00000000030e574>] .kernfs_fop_write+0x154/0x1e0
[<c000000000268450>] .vfs_write+0xe0/0x260
[<c000000000269144>] .SyS_write+0x64/0x110
[<c000000000009ffc>] syscall_exit+0x0/0x7c

[<c000000001b18600>] 0xc000000001b18600
[<c000000000015044>] .__switch_to+0x144/0x200
[<c00000000030be14>] .__kernfs_remove+0x204/0x300
[<c00000000030d428>] .kernfs_remove_by_name_ns+0x68/0xf0
[<c00000000030fb38>] .sysfs_remove_file_ns+0x38/0x60
[<c000000000539354>] .device_remove_attrs+0x54/0xc0
[<c000000000539fd8>] .device_del+0x158/0x250
[<c00000000053a104>] .device_unregister+0x34/0xa0
[<c00000000055bc14>] .unregister_memory_section+0x164/0x170
[<c00000000024ee18>] .__remove_pages+0x108/0x4c0
[<c00000000004b590>] .arch_remove_memory+0x60/0xc0
[<c00000000026446c>] .remove_memory+0x8c/0xe0
[<c00000000007f9f4>] .pseries_remove_memblock+0xd4/0x160
[<c00000000007fcfc>] .pseries_memory_notifier+0x27c/0x290
[<c0000000008ae6cc>] .notifier_call_chain+0x8c/0x100
[<c0000000000d858c>] .__blocking_notifier_call_chain+0x6c/0xe0
[<c00000000071ddec>] .of_property_notify+0x7c/0xc0
[<c00000000071ed3c>] .of_update_property+0x3c/0x1b0
[<c0000000000756cc>] .ofdt_write+0x3dc/0x740
[<c0000000002f60fc>] .proc_reg_write+0xac/0x110
[<c000000000268450>] .vfs_write+0xe0/0x260
[<c000000000269144>] .SyS_write+0x64/0x110
[<c000000000009ffc>] syscall_exit+0x0/0x7c

This patch uses lock_device_hotplug() to protect remove_memory() called
in pseries_remove_memblock(), which is also stated before function
remove_memory():

 * NOTE: The caller must call lock_device_hotplug() to serialize hotplug
 * and online/offline operations before this call, as required by
 * try_offline_node().
 */
void __ref remove_memory(int nid, u64 start, u64 size)

With this lock held, the other process(#1120 above) trying to online the
memory block will retry the system call when calling
lock_device_hotplug_sysfs(), and finally find No such device error.

Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28 16:32:14 +10:00
Anton Blanchard 2d6b63bbdd powerpc/powernv: Fix little endian issues in OPAL dump code
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28 13:11:24 +10:00
Anton Blanchard 3441f04b4b powerpc/powernv: Create OPAL sglist helper functions and fix endian issues
We have two copies of code that creates an OPAL sg list. Consolidate
these into a common set of helpers and fix the endian issues.

The flash interface embedded a version number in the num_entries
field, whereas the dump interface did did not. Since versioning
wasn't added to the flash interface and it is impossible to add
this in a backwards compatible way, just remove it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28 13:11:23 +10:00
Anton Blanchard 14ad0c58d5 powerpc/powernv: Fix little endian issues in OPAL error log code
Fix little endian issues with the OPAL error log code.

Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28 13:11:23 +10:00
Anton Blanchard 56b4c99312 powerpc/powernv: Fix little endian issues with opal_do_notifier calls
The bitmap in opal_poll_events and opal_handle_interrupt is
big endian, so we need to byteswap it on little endian builds.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28 13:11:22 +10:00
Anton Blanchard 2bad742388 powerpc/powernv: Use uint64_t instead of size_t in OPAL APIs
Using size_t in our APIs is asking for trouble, especially
when some OPAL calls use size_t pointers.

Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28 13:11:21 +10:00
Wei Yang 4966bfa1b3 powerpc/powernv: Release the refcount for pci_dev
On PowerNV platform, we are holding an unnecessary refcount on a pci_dev, which
leads to the pci_dev is not destroyed when hotplugging a pci device.

This patch release the unnecessary refcount.

Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28 13:11:20 +10:00
Wei Yang 3f28c5af39 powerpc/powernv: Reduce multi-hit of iommu_add_device()
During the EEH hotplug event, iommu_add_device() will be invoked three times
and two of them will trigger warning or error.

The three times to invoke the iommu_add_device() are:

    pci_device_add
       ...
       set_iommu_table_base_and_group   <- 1st time, fail
    device_add
       ...
       tce_iommu_bus_notifier           <- 2nd time, succees
    pcibios_add_pci_devices
       ...
       pcibios_setup_bus_devices        <- 3rd time, re-attach

The first time fails, since the dev->kobj->sd is not initialized. The
dev->kobj->sd is initialized in device_add().
The third time's warning is triggered by the re-attach of the iommu_group.

After applying this patch, the error

    iommu_tce: 0003:05:00.0 has not been added, ret=-14

and the warning

    [  204.123609] ------------[ cut here ]------------
    [  204.123645] WARNING: at arch/powerpc/kernel/iommu.c:1125
    [  204.123680] Modules linked in: xt_CHECKSUM nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6t_REJECT bnep bluetooth 6lowpan_iphc rfkill xt_conntrack ebtable_nat ebtable_broute bridge stp llc mlx4_ib ib_sa ib_mad ib_core ib_addr ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw bnx2x tg3 mlx4_core nfsd ptp mdio ses libcrc32c nfs_acl enclosure be2net pps_core shpchp lockd kvm uinput sunrpc binfmt_misc lpfc scsi_transport_fc ipr scsi_tgt
    [  204.124356] CPU: 18 PID: 650 Comm: eehd Not tainted 3.14.0-rc5yw+ #102
    [  204.124400] task: c0000027ed485670 ti: c0000027ed50c000 task.ti: c0000027ed50c000
    [  204.124453] NIP: c00000000003cf80 LR: c00000000006c648 CTR: c00000000006c5c0
    [  204.124506] REGS: c0000027ed50f440 TRAP: 0700   Not tainted  (3.14.0-rc5yw+)
    [  204.124558] MSR: 9000000000029032 <SF,HV,EE,ME,IR,DR,RI>  CR: 88008084  XER: 20000000
    [  204.124682] CFAR: c00000000006c644 SOFTE: 1
    GPR00: c00000000006c648 c0000027ed50f6c0 c000000001398380 c0000027ec260300
    GPR04: c0000027ea92c000 c00000000006ad00 c0000000016e41b0 0000000000000110
    GPR08: c0000000012cd4c0 0000000000000001 c0000027ec2602ff 0000000000000062
    GPR12: 0000000028008084 c00000000fdca200 c0000000000d1d90 c0000027ec281a80
    GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
    GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000001
    GPR24: 000000005342697b 0000000000002906 c000001fe6ac9800 c000001fe6ac9800
    GPR28: 0000000000000000 c0000000016e3a80 c0000027ea92c090 c0000027ea92c000
    [  204.125353] NIP [c00000000003cf80] .iommu_add_device+0x30/0x1f0
    [  204.125399] LR [c00000000006c648] .pnv_pci_ioda_dma_dev_setup+0x88/0xb0
    [  204.125443] Call Trace:
    [  204.125464] [c0000027ed50f6c0] [c0000027ed50f750] 0xc0000027ed50f750 (unreliable)
    [  204.125526] [c0000027ed50f750] [c00000000006c648] .pnv_pci_ioda_dma_dev_setup+0x88/0xb0
    [  204.125588] [c0000027ed50f7d0] [c000000000069cc8] .pnv_pci_dma_dev_setup+0x78/0x340
    [  204.125650] [c0000027ed50f870] [c000000000044408] .pcibios_setup_device+0x88/0x2f0
    [  204.125712] [c0000027ed50f940] [c000000000046040] .pcibios_setup_bus_devices+0x60/0xd0
    [  204.125774] [c0000027ed50f9c0] [c000000000043acc] .pcibios_add_pci_devices+0xdc/0x1c0
    [  204.125837] [c0000027ed50fa50] [c00000000086f970] .eeh_reset_device+0x36c/0x4f0
    [  204.125939] [c0000027ed50fb20] [c00000000003a2d8] .eeh_handle_normal_event+0x448/0x480
    [  204.126068] [c0000027ed50fbc0] [c00000000003a35c] .eeh_handle_event+0x4c/0x340
    [  204.126192] [c0000027ed50fc80] [c00000000003a74c] .eeh_event_handler+0xfc/0x1b0
    [  204.126319] [c0000027ed50fd30] [c0000000000d1ea0] .kthread+0x110/0x130
    [  204.126430] [c0000027ed50fe30] [c00000000000a460] .ret_from_kernel_thread+0x5c/0x7c
    [  204.126556] Instruction dump:
    [  204.126610] 7c0802a6 fba1ffe8 fbc1fff0 fbe1fff8 f8010010 f821ff71 7c7e1b78 60000000
    [  204.126787] 60000000 e87e0298 3143ffff 7d2a1910 <0b090000> 2fa90000 40de00c8 ebfe0218
    [  204.126966] ---[ end trace 6e7aefd80add2973 ]---

are cleared.

This patch removes iommu_add_device() in pnv_pci_ioda_dma_dev_setup(), which
revert part of the change in commit d905c5df(PPC: POWERNV: move
iommu_add_device earlier).

Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28 13:11:20 +10:00
Anton Blanchard cc146d1db0 powerpc/powernv: Fix little endian issues in OPAL flash code
With this patch I was able to update firmware on an LE kernel.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28 13:08:50 +10:00
Benjamin Herrenschmidt 298b34d7d5 powerpc/powernv: Fix kexec races going back to OPAL
We have a subtle race when sending CPUs back to OPAL on kexec.

We mark them as "in real mode" right before we send them down. Once
we've booted the new kernel, it might try to call opal_reinit_cpus()
to change endianness, and that requires all CPUs to be spinning inside
OPAL.

However there is no synchronization here and we've observed cases
where the returning CPUs hadn't established their new state inside
OPAL before opal_reinit_cpus() is called, causing it to fail.

The proper fix is to actually wait for them to go down all the way
from the kexec'ing kernel.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28 13:08:50 +10:00
Joel Stanley 63aecfb20a powerpc/powernv: Check sysparam size before creation
The size of the sysparam sysfs files is determined from the device tree
at boot. However the buffer is hard coded to 64 bytes. If we encounter a
parameter that is larger than 64, or miss-parse the device tree, the
buffer will overflow when reading or writing to the parameter.

Check it at discovery time, and if the parameter is too large, do not
create a sysfs entry for it.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28 13:08:49 +10:00
Joel Stanley 16003d235b powerpc/powernv: Fix typos in sysparam code
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28 13:08:49 +10:00
Joel Stanley 85390378f0 powerpc/powernv: Check sysfs size before copying
The sysparam code currently uses the userspace supplied number of
bytes when memcpy()ing in to a local 64-byte buffer.

Limit the maximum number of bytes by the size of the buffer.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28 13:08:48 +10:00
Joel Stanley b8569d2304 powerpc/powernv: Use ssize_t for sysparam return values
The OPAL calls are returning int64_t values, which the sysparam code
stores in an int, and the sysfs callback returns ssize_t. Make code a
easier to read by consistently using ssize_t.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28 13:08:48 +10:00
Joel Stanley ba9a32b176 powerpc/powernv: Fix sysparam sysfs error handling
When a sysparam query in OPAL returned a negative value (error code),
sysfs would spew out a decent chunk of memory; almost 64K more than
expected. This was traced to a sign/unsigned mix up in the OPAL sysparam
sysfs code at sys_param_show.

The return value of sys_param_show is a ssize_t, calculated using

  return ret ? ret : attr->param_size;

Alan Modra explains:

  "attr->param_size" is an unsigned int, "ret" an int, so the overall
  expression has type unsigned int.  Result is that ret is cast to
  unsigned int before being cast to ssize_t.

Instead of using the ternary operator, set ret to the param_size if an
error is not detected. The same bug exists in the sysfs write callback;
this patch fixes it in the same way.

A note on debugging this next time: on my system gcc will warn about
this if compiled with -Wsign-compare, which is not enabled by -Wall,
only -Wextra.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28 13:08:47 +10:00
Li Zhong 4fb8d027dc powerpc: Fix Oops in rtas_stop_self()
commit 41dd03a9 may cause Oops in rtas_stop_self().

The reason is that the rtas_args was moved into stack space. For a box
with more that 4GB RAM, the stack could easily be outside 32bit range,
but RTAS is 32bit.

So the patch moves rtas_args away from stack by adding static before
it.

Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28 13:08:47 +10:00
Linus Torvalds eeb91e4f9d More ACPI and power management fixes and updates for 3.15-rc1
- Fix for a recently introduced CPU hotplug regression in ARM KVM
    from Ming Lei.
 
  - Fixes for breakage in the at32ap, loongson2_cpufreq, and unicore32
    cpufreq drivers introduced during the 3.14 cycle (-stable material)
    from Chen Gang and Viresh Kumar.
 
  - New powernv cpufreq driver from Vaidyanathan Srinivasan, with bits
    from Gautham R Shenoy and Srivatsa S Bhat.
 
  - Exynos cpufreq driver fix preventing it from being included into
    multiplatform builds that aren't supported by it from Sachin Kamat.
 
  - cpufreq cleanups related to the usage of the driver_data field in
    struct cpufreq_frequency_table from Viresh Kumar.
 
  - cpufreq ppc driver cleanup from Sachin Kamat.
 
  - Intel BayTrail support for intel_idle and ACPI idle from Len Brown.
 
  - Intel CPU model 54 (Atom N2000 series) support for intel_idle from
    Jan Kiszka.
 
  - intel_idle fix for Intel Ivy Town residency targets from Len Brown.
 
  - turbostat updates (Intel Broadwell support and output cleanups)
    from Len Brown.
 
  - New cpuidle sysfs attribute for exporting C-states' target residency
    information to user space from Daniel Lezcano.
 
  - New kernel command line argument to prevent power domains enabled
    by the bootloader from being turned off even if they are not in use
    (for diagnostics purposes) from Tushar Behera.
 
  - Fixes for wakeup sysfs attributes documentation from Geert Uytterhoeven.
 
  - New ACPI video blacklist entry for ThinkPad Helix from Stephen Chandler
    Paul.
 
  - Assorted ACPI cleanups and a Kconfig help update from Jonghwan Choi,
    Zhihui Zhang, Hanjun Guo.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJTRxLAAAoJEILEb/54YlRxnCwP/16UwO/eVE8SIi0TqQboikFC
 k8u7F3zgDYG+xPSzXlCR+J7thTxGueQlrb+aM18PYuMVgaw2rpy7U7SIqEk8s6oR
 uFnzZCWKA5ZebbZn+NlodnQaJmbgJxwsVJDuuechUka/e67CaIc54JULi2ynZ0lz
 Kg/nU3NJhu4S81cT5SOTkJ9xE63oxHcCwKbNqEmxn7x7ddFzGK/DThG67NMEnW1F
 vHbBTSyI6vmXXg1f9aobUtuo3PfJkkx5jD+nR1H2e6wmB64tW7JPVKV3mi6LJfYM
 ui/8/gNb3PUMHMX1QbL9EFbPxl9miQx2NJ7dgFKa1HZ/WPyiXpJjz7uGr9O3Fau3
 cFVREdaW8p2TAYWOEgH8luohhdK0j8UEpR/sEm0TrTjsK8wqczVf/hz6RraVJZiN
 ck6eVHjY6m3/bFQauZQ/r+DNeeNcdr+iLejgjbh/MXuF3j0kx+1dkKkzCEU2TgEZ
 9etF0uzjlgyXySyxNKBeSW13+ssVA6kF5/BHns7LHoxTfGu7Y4oVaWUi+j74i66O
 bc+2ileNal71mS4v9gomnj6Ffj8oH8KXFA7k0sEsAdwLZNgThB5bTppmY/U7Y5Ce
 hTS81tcGe2vOVQzF9iFOF7LNKKussAVAtrgkkrA8lJLeOTfQbIo4+fMhORxf3X/p
 3O7R/jc4cT+IXK8a2xRt
 =hGKg
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.15-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more ACPI and power management fixes and updates from Rafael Wysocki:
 "This is PM and ACPI material that has emerged over the last two weeks
  and one fix for a CPU hotplug regression introduced by the recent CPU
  hotplug notifiers registration series.

  Included are intel_idle and turbostat updates from Len Brown (these
  have been in linux-next for quite some time), a new cpufreq driver for
  powernv (that might spend some more time in linux-next, but BenH was
  asking me so nicely to push it for 3.15 that I couldn't resist), some
  cpufreq fixes and cleanups (including fixes for some silly breakage in
  a couple of cpufreq drivers introduced during the 3.14 cycle),
  assorted ACPI cleanups, wakeup framework documentation fixes, a new
  sysfs attribute for cpuidle and a new command line argument for power
  domains diagnostics.

  Specifics:

   - Fix for a recently introduced CPU hotplug regression in ARM KVM
     from Ming Lei.

   - Fixes for breakage in the at32ap, loongson2_cpufreq, and unicore32
     cpufreq drivers introduced during the 3.14 cycle (-stable material)
     from Chen Gang and Viresh Kumar.

   - New powernv cpufreq driver from Vaidyanathan Srinivasan, with bits
     from Gautham R Shenoy and Srivatsa S Bhat.

   - Exynos cpufreq driver fix preventing it from being included into
     multiplatform builds that aren't supported by it from Sachin Kamat.

   - cpufreq cleanups related to the usage of the driver_data field in
     struct cpufreq_frequency_table from Viresh Kumar.

   - cpufreq ppc driver cleanup from Sachin Kamat.

   - Intel BayTrail support for intel_idle and ACPI idle from Len Brown.

   - Intel CPU model 54 (Atom N2000 series) support for intel_idle from
     Jan Kiszka.

   - intel_idle fix for Intel Ivy Town residency targets from Len Brown.

   - turbostat updates (Intel Broadwell support and output cleanups)
     from Len Brown.

   - New cpuidle sysfs attribute for exporting C-states' target
     residency information to user space from Daniel Lezcano.

   - New kernel command line argument to prevent power domains enabled
     by the bootloader from being turned off even if they are not in use
     (for diagnostics purposes) from Tushar Behera.

   - Fixes for wakeup sysfs attributes documentation from Geert
     Uytterhoeven.

   - New ACPI video blacklist entry for ThinkPad Helix from Stephen
     Chandler Paul.

   - Assorted ACPI cleanups and a Kconfig help update from Jonghwan
     Choi, Zhihui Zhang, Hanjun Guo"

* tag 'pm+acpi-3.15-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (28 commits)
  ACPI: Update the ACPI spec information in Kconfig
  arm, kvm: fix double lock on cpu_add_remove_lock
  cpuidle: sysfs: Export target residency information
  cpufreq: ppc: Remove duplicate inclusion of fsl_soc.h
  cpufreq: create another field .flags in cpufreq_frequency_table
  cpufreq: use kzalloc() to allocate memory for cpufreq_frequency_table
  cpufreq: don't print value of .driver_data from core
  cpufreq: ia64: don't set .driver_data to index
  cpufreq: powernv: Select CPUFreq related Kconfig options for powernv
  cpufreq: powernv: Use cpufreq_frequency_table.driver_data to store pstate ids
  cpufreq: powernv: cpufreq driver for powernv platform
  cpufreq: at32ap: don't declare local variable as static
  cpufreq: loongson2_cpufreq: don't declare local variable as static
  cpufreq: unicore32: fix typo issue for 'clk'
  cpufreq: exynos: Disable on multiplatform build
  PM / wakeup: Correct presence vs. emptiness of wakeup_* attributes
  PM / domains: Add pd_ignore_unused to keep power domains enabled
  ACPI / dock: Drop dock_device_ids[] table
  ACPI / video: Favor native backlight interface for ThinkPad Helix
  ACPI / thermal: Fix wrong variable usage in debug statement
  ...
2014-04-11 13:20:04 -07:00
Linus Torvalds 042f7b7cbd Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull more powerpc updates from Ben Herrenschmidt:
 "Here are a few more powerpc things for you.

  So you'll find here the conversion of the two new firmware sysfs
  interfaces to the new API for self-removing files that Greg and Tejun
  introduced, so they can finally remove the old one.

  I'm also reverting the hwmon driver for powernv.  I shouldn't have
  merged it, I got a bit carried away here.  I hadn't realized it was
  never CCed to the relevant maintainer(s) and list(s), and happens to
  have some issues so I'm taking it out and it will come back via the
  proper channels.

  The rest is a bunch of LE fixes (argh, some of the new stuff was
  broken on LE, I really need to start testing LE myself !) and various
  random fixes here and there.

  Finally one bit that's not strictly a fix, which is the HVC OPAL
  change to "kick" the HVC thread when the firmware tells us there is
  new incoming data.  I don't feel like waiting for this one, it's
  simple enough, and it makes a big difference in console responsiveness
  which is good for my nerves"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (26 commits)
  powerpc/powernv Adapt opal-elog and opal-dump to new sysfs_remove_file_self
  Revert "powerpc/powernv: hwmon driver for power values, fan rpm and temperature"
  power, sched: stop updating inside arch_update_cpu_topology() when nothing to be update
  powerpc/le: Avoid creatng R_PPC64_TOCSAVE relocations for modules.
  arch/powerpc: Use RCU_INIT_POINTER(x, NULL) in platforms/cell/spu_syscalls.c
  powerpc/opal: Add missing include
  powerpc: Convert last uses of __FUNCTION__ to __func__
  powerpc: Add lq/stq emulation
  powerpc/powernv: Add invalid OPAL call
  powerpc/powernv: Add OPAL message log interface
  powerpc/book3s: Fix mc_recoverable_range buffer overrun issue.
  powerpc: Remove dead code in sycall entry
  powerpc: Use of_node_init() for the fakenode in msi_bitmap.c
  powerpc/mm: NUMA pte should be handled via slow path in get_user_pages_fast()
  powerpc/powernv: Fix endian issues with sensor code
  powerpc/powernv: Fix endian issues with OPAL async code
  tty/hvc_opal: Kick the HVC thread on OPAL console events
  powerpc/powernv: Add opal_notifier_unregister() and export to modules
  powerpc/ppc64: Do not turn AIL (reloc-on interrupts) too early
  powerpc/ppc64: Gracefully handle early interrupts
  ...
2014-04-09 08:35:31 -07:00
Stewart Smith cc4f265ad9 powerpc/powernv Adapt opal-elog and opal-dump to new sysfs_remove_file_self
We are currently using sysfs_schedule_callback() which is deprecated
and about to be removed. Switch to the new interface instead.

Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09 13:51:50 +10:00
Monam Agarwal 282efb7023 arch/powerpc: Use RCU_INIT_POINTER(x, NULL) in platforms/cell/spu_syscalls.c
Here rcu_assign_pointer() is ensuring that the
initialization of a structure is carried out before storing a pointer
to that structure.
So, rcu_assign_pointer(p, NULL) can always safely be converted to
RCU_INIT_POINTER(p, NULL).

Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09 12:53:40 +10:00
Joe Perches aba6f4f2e6 powerpc: Convert last uses of __FUNCTION__ to __func__
Just about all of these have been converted to __func__,
so convert the last uses.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09 12:53:32 +10:00
Joel Stanley e28b05e7ae powerpc/powernv: Add invalid OPAL call
This call will not be understood by OPAL, and cause it to add an error
to it's log. Among other things, this is useful for testing the
behaviour of the log as it fills up.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09 12:53:23 +10:00
Joel Stanley bfc36894a4 powerpc/powernv: Add OPAL message log interface
OPAL provides an in-memory circular buffer containing a message log
populated with various runtime messages produced by the firmware.

Provide a sysfs interface /sys/firmware/opal/msglog for userspace to
view the messages.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09 12:53:19 +10:00
Mahesh Salgaonkar 6e556b4710 powerpc/book3s: Fix mc_recoverable_range buffer overrun issue.
Currently we wrongly allocate mc_recoverable_range buffer (to hold
recoverable ranges) based on size of the property "mcheck-recoverable-ranges".
This results in allocating less memory to hold available recoverable range
entries from /proc/device-tree/ibm,opal/mcheck-recoverable-ranges.

This patch fixes this issue by allocating mc_recoverable_range buffer based
on number of entries of recoverable ranges instead of device property size.
Without this change we end up allocating less memory and run into memory
corruption issue.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09 12:53:15 +10:00
Anton Blanchard 9000c17dc0 powerpc/powernv: Fix endian issues with sensor code
One OPAL call and one device tree property needed byte swapping.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09 12:52:49 +10:00
Rafael J. Wysocki fe10739284 Merge branch 'pm-cpufreq'
* pm-cpufreq:
  cpufreq: ppc: Remove duplicate inclusion of fsl_soc.h
  cpufreq: create another field .flags in cpufreq_frequency_table
  cpufreq: use kzalloc() to allocate memory for cpufreq_frequency_table
  cpufreq: don't print value of .driver_data from core
  cpufreq: ia64: don't set .driver_data to index
  cpufreq: powernv: Select CPUFreq related Kconfig options for powernv
  cpufreq: powernv: Use cpufreq_frequency_table.driver_data to store pstate ids
  cpufreq: powernv: cpufreq driver for powernv platform
  cpufreq: at32ap: don't declare local variable as static
  cpufreq: loongson2_cpufreq: don't declare local variable as static
  cpufreq: unicore32: fix typo issue for 'clk'
  cpufreq: exynos: Disable on multiplatform build
2014-04-08 13:28:02 +02:00
Josh Triplett 527518f1a9 ppc: make PPC_BOOK3S_64 select IRQ_WORK
Fix breakage which will be exposed by the patch "kconfig: make allnoconfig
disable options behind EMBEDDED and EXPERT".

arch/powerpc/kernel/mce.c, compiled in for PPC_BOOK3S_64, calls
functions only built when IRQ_WORK, so select it.  Fixes the following
build error:

  arch/powerpc/kernel/built-in.o: In function `.machine_check_queue_event':
  (.text+0x11260): undefined reference to `.irq_work_queue'

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:09 -07:00
Gautham R. Shenoy 81f359027a cpufreq: powernv: Select CPUFreq related Kconfig options for powernv
Enable CPUFreq for PowerNV. Select "performance", "powersave",
"userspace" and "ondemand" governors. Choose "ondemand" to be the
default governor.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-07 14:35:28 +02:00
Anton Blanchard bb4398e1de powerpc/powernv: Fix endian issues with OPAL async code
OPAL defines opal_msg as a big endian struct so we have to
byte swap it on little endian builds.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-07 10:34:27 +10:00
Benjamin Herrenschmidt 798af00c4d powerpc/powernv: Add opal_notifier_unregister() and export to modules
opal_notifier_register() is missing a pending "unregister" variant
and should be exposed to modules.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-07 10:33:16 +10:00
Greg Kurz a08a53ea4c powerpc/le: Enable RTAS events support
The current kernel code assumes big endian and parses RTAS events all
wrong. The most visible effect is that we cannot honor EPOW events,
meaning, for example, we cannot shut down a guest properly from the
hypervisor.

This new patch is largely inspired by Nathan's work: we get rid of all
the bit fields in the RTAS event structures (even the unused ones, for
consistency). We also introduce endian safe accessors for the fields used
by the kernel (trivial rtas_error_type() accessor added for consistency).

Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-07 10:33:12 +10:00
Linus Torvalds b9f2b21a32 Devicetree changes for v3.15
Updates to devicetree core code. This branch contains the following notable changes:
 * Add reserved memory binding
 * Make struct device_node a kobject and remove legacy /proc/device-tree
 * ePAPR conformance fixes
 * Update in-kernel DTC copy to version v1.4.0
 * Preparation changes for dynamic device tree overlays
 * minor bug fixes and documentation changes
 
 The most significant change in this branch is the conversion of struct
 device_node to be a kobject that is exposed via sysfs and removal of the
 old /proc/device-tree code. This simplifies the device tree handling
 code and tightens up the lifecycle on device tree nodes.
 
 [updated: added fix for dangling select PROC_DEVICETREE]
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTOyNwAAoJEMWQL496c2LNZY0QAIreUrpo3/hKRau61EDPXkOA
 UFRyPUHD0k/dNXWWDbTfvKH/nAfzdVwejhePqEWiODiFOFkq7JyQlMKPA+CZuZj0
 ygN4215A1yj/hDf6JRD5Zn4WGpawDt9InlbZSps6P5dd8voV5t5dz6uzz+Y7uqaK
 CAjTDlBSmxEen5vRHiHQgKv74au/+b9yfSURjPQVWg46+wl3WJwjsdzerphm4unW
 tpEr8zkIsm51mqqAx4penIuiovh7+L2J5v4BFeg8o+kaZEuZpVxLHJPOuBd5hdom
 zeqEIj3AqHTh5suYIHe4aAbZ2wMP3kYGgkPGwfWLnwLyULxalcCtGZeaCi9nwTFj
 Fdj+7f17ocrt5mif0f5Deufi1LqJsDjhY6G9p7HuV7Y9hsMILpJIUoGENPji+TWj
 BA4L45eaPmNYdKJytEtFD7F2WnXeHZ6fDtYho/39DWW+Bt16IFX85T199irhxGG4
 byN6LRaahk2UeycSXkQHAlWOQHqzBcJJAkQLN2iahzyYRr9Dy+VI2E9clm53m49O
 YQYcONdUlMYrtfRwJpbB9XHM0HgZUvg0LT5z/iHQs9uJtoo33Oj+zxFixyZLQ9Dq
 qyLqQWEpV9gFLAo9tpf56gffkLiJRsHkX4UJ6oTtj4DY1WWU9H81jjCvv/7flzp/
 8ZyyZzANQf1DZ9kqO2v+
 =lyA5
 -----END PGP SIGNATURE-----

Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linux

Pull devicetree changes from Grant Likely:
 "Updates to devicetree core code.  This branch contains the following
  notable changes:

   - add reserved memory binding
   - make struct device_node a kobject and remove legacy
     /proc/device-tree
   - ePAPR conformance fixes
   - update in-kernel DTC copy to version v1.4.0
   - preparatory changes for dynamic device tree overlays
   - minor bug fixes and documentation changes

  The most significant change in this branch is the conversion of struct
  device_node to be a kobject that is exposed via sysfs and removal of
  the old /proc/device-tree code.  This simplifies the device tree
  handling code and tightens up the lifecycle on device tree nodes.

  [updated: added fix for dangling select PROC_DEVICETREE]"

* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: (29 commits)
  dt: Remove dangling "select PROC_DEVICETREE"
  of: Add support for ePAPR "stdout-path" property
  of: device_node kobject lifecycle fixes
  of: only scan for reserved mem when fdt present
  powerpc: add support for reserved memory defined by device tree
  arm64: add support for reserved memory defined by device tree
  of: add missing major vendors
  of: add vendor prefix for SMSC
  of: remove /proc/device-tree
  of/selftest: Add self tests for manipulation of properties
  of: Make device nodes kobjects so they show up in sysfs
  arm: add support for reserved memory defined by device tree
  drivers: of: add support for custom reserved memory drivers
  drivers: of: add initialization code for dynamic reserved memory
  drivers: of: add initialization code for static reserved memory
  of: document bindings for reserved-memory nodes
  Revert "of: fix of_update_property()"
  kbuild: dtbs_install: new make target
  ARM: mvebu: Allows to get the SoC ID even without PCI enabled
  of: Allows to use the PCI translator without the PCI core
  ...
2014-04-02 14:27:15 -07:00
Linus Torvalds e6d9bfc638 Merge branch 'powernv-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc non-virtualized cpuidle from Ben Herrenschmidt:
 "This is the branch I mentioned in my other pull request which contains
  our improved cpuidle support for the "powernv" platform
  (non-virtualized).

  It adds support for the "fast sleep" feature of the processor which
  provides higher power savings than our usual "nap" mode but at the
  cost of losing the timers while asleep, and thus exploits the new
  timer broadcast framework to work around that limitation.

  It's based on a tip timer tree that you seem to have already merged"

* 'powernv-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  cpuidle/powernv: Parse device tree to setup idle states
  cpuidle/powernv: Add "Fast-Sleep" CPU idle state
  powerpc/powernv: Add OPAL call to resync timebase on wakeup
  powerpc/powernv: Add context management for Fast Sleep
  powerpc: Split timer_interrupt() into timer handling and interrupt handling routines
  powerpc: Implement tick broadcast IPI as a fixed IPI message
  powerpc: Free up the slot of PPC_MSG_CALL_FUNC_SINGLE IPI message
2014-04-02 13:47:29 -07:00
Linus Torvalds 235c7b9feb Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull main powerpc updates from Ben Herrenschmidt:
 "This time around, the powerpc merges are going to be a little bit more
  complicated than usual.

  This is the main pull request with most of the work for this merge
  window.  I will describe it a bit more further down.

  There is some additional cpuidle driver work, however I haven't
  included it in this tree as it depends on some work in tip/timer-core
  which Thomas accidentally forgot to put in a topic branch.  Since I
  didn't want to carry all of that tip timer stuff in powerpc -next, I
  setup a separate branch on top of Thomas tree with just that cpuidle
  driver in it, and Stephen has been carrying that in next separately
  for a while now.  I'll send a separate pull request for it.

  Additionally, two new pieces in this tree add users for a sysfs API
  that Tejun and Greg have been deprecating in drivers-core-next.
  Thankfully Greg reverted the patch that removes the old API so this
  merge can happen cleanly, but once merged, I will send a patch
  adjusting our new code to the new API so that Greg can send you the
  removal patch.

  Now as for the content of this branch, we have a lot of perf work for
  power8 new counters including support for our new "nest" counters
  (also called 24x7) under pHyp (not natively yet).

  We have new functionality when running under the OPAL firmware
  (non-virtualized or KVM host), such as access to the firmware error
  logs and service processor dumps, system parameters and sensors, along
  with a hwmon driver for the latter.

  There's also a bunch of bug fixes accross the board, some LE fixes,
  and a nice set of selftests for validating our various types of copy
  loops.

  On the Freescale side, we see mostly new chip/board revisions, some
  clock updates, better support for machine checks and debug exceptions,
  etc..."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (70 commits)
  powerpc/book3s: Fix CFAR clobbering issue in machine check handler.
  powerpc/compat: 32-bit little endian machine name is ppcle, not ppc
  powerpc/le: Big endian arguments for ppc_rtas()
  powerpc: Use default set of netfilter modules (CONFIG_NETFILTER_ADVANCED=n)
  powerpc/defconfigs: Enable THP in pseries defconfig
  powerpc/mm: Make sure a local_irq_disable prevent a parallel THP split
  powerpc: Rate-limit users spamming kernel log buffer
  powerpc/perf: Fix handling of L3 events with bank == 1
  powerpc/perf/hv_{gpci, 24x7}: Add documentation of device attributes
  powerpc/perf: Add kconfig option for hypervisor provided counters
  powerpc/perf: Add support for the hv 24x7 interface
  powerpc/perf: Add support for the hv gpci (get performance counter info) interface
  powerpc/perf: Add macros for defining event fields & formats
  powerpc/perf: Add a shared interface to get gpci version and capabilities
  powerpc/perf: Add 24x7 interface headers
  powerpc/perf: Add hv_gpci interface header
  powerpc: Add hvcalls for 24x7 and gpci (Get Performance Counter Info)
  sysfs: create bin_attributes under the requested group
  powerpc/perf: Enable BHRB access for EBB events
  powerpc/perf: Add BHRB constraint and IFM MMCRA handling for EBB
  ...
2014-04-02 13:42:59 -07:00
Linus Torvalds 3e75c6de1a USB patches for 3.15-rc1
Here's the big USB pull request for 3.15-rc1.
 
 The normal set of patches, lots of controller driver updates, and a
 smattering of individual USB driver updates as well.
 
 All have been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iEYEABECAAYFAlM7AbcACgkQMUfUDdst+ymbZACgncdbZyPsVZ7ZUpBFNbO/vBVT
 T9UAmwciojEzjh7b+x4ylsWH+O3LWVN3
 =RpAF
 -----END PGP SIGNATURE-----

Merge tag 'usb-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB patches from Greg KH:
 "Here's the big USB pull request for 3.15-rc1.

  The normal set of patches, lots of controller driver updates, and a
  smattering of individual USB driver updates as well.

  All have been in linux-next for a while"

* tag 'usb-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (249 commits)
  xhci: Transition maintainership to Mathias Nyman.
  USB: disable reset-resume when USB_QUIRK_RESET is set
  USB: unbind all interfaces before rebinding any
  usb: phy: Add ulpi IDs for SMSC USB3320 and TI TUSB1210
  usb: gadget: tcm_usb_gadget: stop format strings
  usb: gadget: f_fs: add missing spinlock and mutex unlock
  usb: gadget: composite: switch over to ERR_CAST()
  usb: gadget: inode: switch over to memdup_user()
  usb: gadget: f_subset: switch over to PTR_RET
  usb: gadget: lpc32xx_udc: fix wrong clk_put() sequence
  USB: keyspan: remove dead debugging code
  USB: serial: add missing newlines to dev_<level> messages.
  USB: serial: add missing braces
  USB: serial: continue to write on errors
  USB: serial: continue to read on errors
  USB: serial: make bulk_out_size a lower limit
  USB: cypress_m8: fix potential scheduling while atomic
  devicetree: bindings: document lsi,zevio-usb
  usb: chipidea: add support for USB OTG controller on LSI Zevio SoCs
  usb: chipidea: imx: Use dev_name() for ci_hdrc name to distinguish USBs
  ...
2014-04-01 17:06:09 -07:00
Linus Torvalds 4b1779c2cf PCI changes for the v3.15 merge window:
Enumeration
     - Increment max correctly in pci_scan_bridge() (Andreas Noever)
     - Clarify the "scan anyway" comment in pci_scan_bridge() (Andreas Noever)
     - Assign CardBus bus number only during the second pass (Andreas Noever)
     - Use request_resource_conflict() instead of insert_ for bus numbers (Andreas Noever)
     - Make sure bus number resources stay within their parents bounds (Andreas Noever)
     - Remove pci_fixup_parent_subordinate_busnr() (Andreas Noever)
     - Check for child busses which use more bus numbers than allocated (Andreas Noever)
     - Don't scan random busses in pci_scan_bridge() (Andreas Noever)
     - x86: Drop pcibios_scan_root() check for bus already scanned (Bjorn Helgaas)
     - x86: Use pcibios_scan_root() instead of pci_scan_bus_with_sysdata() (Bjorn Helgaas)
     - x86: Use pcibios_scan_root() instead of pci_scan_bus_on_node() (Bjorn Helgaas)
     - x86: Merge pci_scan_bus_on_node() into pcibios_scan_root() (Bjorn Helgaas)
     - x86: Drop return value of pcibios_scan_root() (Bjorn Helgaas)
 
   NUMA
     - x86: Add x86_pci_root_bus_node() to look up NUMA node from PCI bus (Bjorn Helgaas)
     - x86: Use x86_pci_root_bus_node() instead of get_mp_bus_to_node() (Bjorn Helgaas)
     - x86: Remove mp_bus_to_node[], set_mp_bus_to_node(), get_mp_bus_to_node() (Bjorn Helgaas)
     - x86: Use NUMA_NO_NODE, not -1, for unknown node (Bjorn Helgaas)
     - x86: Remove acpi_get_pxm() usage (Bjorn Helgaas)
     - ia64: Use NUMA_NO_NODE, not MAX_NUMNODES, for unknown node (Bjorn Helgaas)
     - ia64: Remove acpi_get_pxm() usage (Bjorn Helgaas)
     - ACPI: Fix acpi_get_node() prototype (Bjorn Helgaas)
 
   Resource management
     - i2o: Fix and refactor PCI space allocation (Bjorn Helgaas)
     - Add resource_contains() (Bjorn Helgaas)
     - Add %pR support for IORESOURCE_UNSET (Bjorn Helgaas)
     - Mark resources as IORESOURCE_UNSET if we can't assign them (Bjorn Helgaas)
     - Don't clear IORESOURCE_UNSET when updating BAR (Bjorn Helgaas)
     - Check IORESOURCE_UNSET before updating BAR (Bjorn Helgaas)
     - Don't try to claim IORESOURCE_UNSET resources (Bjorn Helgaas)
     - Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit (Bjorn Helgaas)
     - Don't enable decoding if BAR hasn't been assigned an address (Bjorn Helgaas)
     - Add "weak" generic pcibios_enable_device() implementation (Bjorn Helgaas)
     - alpha, microblaze, sh, sparc, tile: Use default pcibios_enable_device() (Bjorn Helgaas)
     - s390: Use generic pci_enable_resources() (Bjorn Helgaas)
     - Don't check resource_size() in pci_bus_alloc_resource() (Bjorn Helgaas)
     - Set type in __request_region() (Bjorn Helgaas)
     - Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region() (Bjorn Helgaas)
     - Change pci_bus_alloc_resource() type_mask to unsigned long (Bjorn Helgaas)
     - Log IDE resource quirk in dmesg (Bjorn Helgaas)
     - Revert "[PATCH] Insert GART region into resource map" (Bjorn Helgaas)
 
   PCI device hotplug
     - Make check_link_active() non-static (Rajat Jain)
     - Use link change notifications for hot-plug and removal (Rajat Jain)
     - Enable link state change notifications (Rajat Jain)
     - Don't disable the link permanently during removal (Rajat Jain)
     - Don't check adapter or latch status while disabling (Rajat Jain)
     - Disable link notification across slot reset (Rajat Jain)
     - Ensure very fast hotplug events are also processed (Rajat Jain)
     - Add hotplug_lock to serialize hotplug events (Rajat Jain)
     - Remove a non-existent card, regardless of "surprise" capability (Rajat Jain)
     - Don't turn slot off when hot-added device already exists (Yijing Wang)
 
   MSI
     - Keep pci_enable_msi() documentation (Alexander Gordeev)
     - ahci: Fix broken single MSI fallback (Alexander Gordeev)
     - ahci, vfio: Use pci_enable_msi_range() (Alexander Gordeev)
     - Check kmalloc() return value, fix leak of name (Greg Kroah-Hartman)
     - Fix leak of msi_attrs (Greg Kroah-Hartman)
     - Fix pci_msix_vec_count() htmldocs failure (Masanari Iida)
 
   Virtualization
     - Device-specific ACS support (Alex Williamson)
 
   Freescale i.MX6
     - Wait for retraining (Marek Vasut)
 
   Marvell MVEBU
     - Use Device ID and revision from underlying endpoint (Andrew Lunn)
     - Fix incorrect size for PCI aperture resources (Jason Gunthorpe)
     - Call request_resource() on the apertures (Jason Gunthorpe)
     - Fix potential issue in range parsing (Jean-Jacques Hiblot)
 
   Renesas R-Car
     - Check platform_get_irq() return code (Ben Dooks)
     - Add error interrupt handling (Ben Dooks)
     - Fix bridge logic configuration accesses (Ben Dooks)
     - Register each instance independently (Magnus Damm)
     - Break out window size handling (Magnus Damm)
     - Make the Kconfig dependencies more generic (Magnus Damm)
 
   Synopsys DesignWare
     - Fix RC BAR to be single 64-bit non-prefetchable memory (Mohit Kumar)
 
   Miscellaneous
     - Remove unused SR-IOV VF Migration support (Bjorn Helgaas)
     - Enable INTx if BIOS left them disabled (Bjorn Helgaas)
     - Fix hex vs decimal typo in cpqhpc_probe() (Dan Carpenter)
     - Clean up par-arch object file list (Liviu Dudau)
     - Set IORESOURCE_ROM_SHADOW only for the default VGA device (Sander Eikelenboom)
     - ACPI, ARM, drm, powerpc, pcmcia, PCI: Use list_for_each_entry() for bus traversal (Yijing Wang)
     - Fix pci_bus_b() build failure (Paul Gortmaker)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJTOdAZAAoJEFmIoMA60/r8VYUQALRrReyMBk3pjRt/fKIX4Kwi
 ydSo/YJeeKTN8K93fLw8bb8bdPItJScJFTfEa4Q2SpZezR/ecGXLowisy0BBaPHK
 qtOyB8EqjkLS17GfyecIe9Nd2SIAI2De/0bchK3kDtIX1YlZB/k/tD3eCPMHDnnl
 m8c5kAHKPQYd8g01I+S8nrtGHk/A33grfYpJXPZbcqyhE0lWU3SI8KDAGbcKzNHE
 23Do0yNyd4nHIdixWlhETcNvzHn35Q/O38JJwW9Mf1aI9gusYuml6GFefCgu/iov
 lxqp3CEW7iPZgQEgNbrQ0HzWn/durL2Trd6S/Yh6f2xbm1LGYKWh3LZUFLd3AQDd
 INEpUgKsyb//nF3dtiyGnZlp0QykoqFyLo2AEDrb+ILTd4up5DeRY/m1UpjAXR5p
 QicBmrDksHrSivPmMZwLx1DFQYKjQbdx5lOqy9hQM/Jmsr+N3/l7QBrbQWXks3JZ
 NNAyn4RZHQB7UDQS/MmVPArs+JK5qaEDQD57QuOTlqgP19VY9C9E/l/aEqefjdFo
 XOAm7CwGpB/iBAkIbE6ROEDiJArigRVHEfxLYeE/jtGOdRDCD1deWk+g3S8DWD7m
 ZxWSgIVB00PMAmomczdg59YVFBhocgwPUa8/cw6yqzx2QKP4mWXIFZ/Sjau5I3tn
 WWoxXlUirZfTJc29XnVy
 =3mNS
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:
 "Enumeration
   - Increment max correctly in pci_scan_bridge() (Andreas Noever)
   - Clarify the "scan anyway" comment in pci_scan_bridge() (Andreas Noever)
   - Assign CardBus bus number only during the second pass (Andreas Noever)
   - Use request_resource_conflict() instead of insert_ for bus numbers (Andreas Noever)
   - Make sure bus number resources stay within their parents bounds (Andreas Noever)
   - Remove pci_fixup_parent_subordinate_busnr() (Andreas Noever)
   - Check for child busses which use more bus numbers than allocated (Andreas Noever)
   - Don't scan random busses in pci_scan_bridge() (Andreas Noever)
   - x86: Drop pcibios_scan_root() check for bus already scanned (Bjorn Helgaas)
   - x86: Use pcibios_scan_root() instead of pci_scan_bus_with_sysdata() (Bjorn Helgaas)
   - x86: Use pcibios_scan_root() instead of pci_scan_bus_on_node() (Bjorn Helgaas)
   - x86: Merge pci_scan_bus_on_node() into pcibios_scan_root() (Bjorn Helgaas)
   - x86: Drop return value of pcibios_scan_root() (Bjorn Helgaas)

  NUMA
   - x86: Add x86_pci_root_bus_node() to look up NUMA node from PCI bus (Bjorn Helgaas)
   - x86: Use x86_pci_root_bus_node() instead of get_mp_bus_to_node() (Bjorn Helgaas)
   - x86: Remove mp_bus_to_node[], set_mp_bus_to_node(), get_mp_bus_to_node() (Bjorn Helgaas)
   - x86: Use NUMA_NO_NODE, not -1, for unknown node (Bjorn Helgaas)
   - x86: Remove acpi_get_pxm() usage (Bjorn Helgaas)
   - ia64: Use NUMA_NO_NODE, not MAX_NUMNODES, for unknown node (Bjorn Helgaas)
   - ia64: Remove acpi_get_pxm() usage (Bjorn Helgaas)
   - ACPI: Fix acpi_get_node() prototype (Bjorn Helgaas)

  Resource management
   - i2o: Fix and refactor PCI space allocation (Bjorn Helgaas)
   - Add resource_contains() (Bjorn Helgaas)
   - Add %pR support for IORESOURCE_UNSET (Bjorn Helgaas)
   - Mark resources as IORESOURCE_UNSET if we can't assign them (Bjorn Helgaas)
   - Don't clear IORESOURCE_UNSET when updating BAR (Bjorn Helgaas)
   - Check IORESOURCE_UNSET before updating BAR (Bjorn Helgaas)
   - Don't try to claim IORESOURCE_UNSET resources (Bjorn Helgaas)
   - Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit (Bjorn Helgaas)
   - Don't enable decoding if BAR hasn't been assigned an address (Bjorn Helgaas)
   - Add "weak" generic pcibios_enable_device() implementation (Bjorn Helgaas)
   - alpha, microblaze, sh, sparc, tile: Use default pcibios_enable_device() (Bjorn Helgaas)
   - s390: Use generic pci_enable_resources() (Bjorn Helgaas)
   - Don't check resource_size() in pci_bus_alloc_resource() (Bjorn Helgaas)
   - Set type in __request_region() (Bjorn Helgaas)
   - Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region() (Bjorn Helgaas)
   - Change pci_bus_alloc_resource() type_mask to unsigned long (Bjorn Helgaas)
   - Log IDE resource quirk in dmesg (Bjorn Helgaas)
   - Revert "[PATCH] Insert GART region into resource map" (Bjorn Helgaas)

  PCI device hotplug
   - Make check_link_active() non-static (Rajat Jain)
   - Use link change notifications for hot-plug and removal (Rajat Jain)
   - Enable link state change notifications (Rajat Jain)
   - Don't disable the link permanently during removal (Rajat Jain)
   - Don't check adapter or latch status while disabling (Rajat Jain)
   - Disable link notification across slot reset (Rajat Jain)
   - Ensure very fast hotplug events are also processed (Rajat Jain)
   - Add hotplug_lock to serialize hotplug events (Rajat Jain)
   - Remove a non-existent card, regardless of "surprise" capability (Rajat Jain)
   - Don't turn slot off when hot-added device already exists (Yijing Wang)

  MSI
   - Keep pci_enable_msi() documentation (Alexander Gordeev)
   - ahci: Fix broken single MSI fallback (Alexander Gordeev)
   - ahci, vfio: Use pci_enable_msi_range() (Alexander Gordeev)
   - Check kmalloc() return value, fix leak of name (Greg Kroah-Hartman)
   - Fix leak of msi_attrs (Greg Kroah-Hartman)
   - Fix pci_msix_vec_count() htmldocs failure (Masanari Iida)

  Virtualization
   - Device-specific ACS support (Alex Williamson)

  Freescale i.MX6
   - Wait for retraining (Marek Vasut)

  Marvell MVEBU
   - Use Device ID and revision from underlying endpoint (Andrew Lunn)
   - Fix incorrect size for PCI aperture resources (Jason Gunthorpe)
   - Call request_resource() on the apertures (Jason Gunthorpe)
   - Fix potential issue in range parsing (Jean-Jacques Hiblot)

  Renesas R-Car
   - Check platform_get_irq() return code (Ben Dooks)
   - Add error interrupt handling (Ben Dooks)
   - Fix bridge logic configuration accesses (Ben Dooks)
   - Register each instance independently (Magnus Damm)
   - Break out window size handling (Magnus Damm)
   - Make the Kconfig dependencies more generic (Magnus Damm)

  Synopsys DesignWare
   - Fix RC BAR to be single 64-bit non-prefetchable memory (Mohit Kumar)

  Miscellaneous
   - Remove unused SR-IOV VF Migration support (Bjorn Helgaas)
   - Enable INTx if BIOS left them disabled (Bjorn Helgaas)
   - Fix hex vs decimal typo in cpqhpc_probe() (Dan Carpenter)
   - Clean up par-arch object file list (Liviu Dudau)
   - Set IORESOURCE_ROM_SHADOW only for the default VGA device (Sander Eikelenboom)
   - ACPI, ARM, drm, powerpc, pcmcia, PCI: Use list_for_each_entry() for bus traversal (Yijing Wang)
   - Fix pci_bus_b() build failure (Paul Gortmaker)"

* tag 'pci-v3.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (108 commits)
  Revert "[PATCH] Insert GART region into resource map"
  PCI: Log IDE resource quirk in dmesg
  PCI: Change pci_bus_alloc_resource() type_mask to unsigned long
  PCI: Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region()
  resources: Set type in __request_region()
  PCI: Don't check resource_size() in pci_bus_alloc_resource()
  s390/PCI: Use generic pci_enable_resources()
  tile PCI RC: Use default pcibios_enable_device()
  sparc/PCI: Use default pcibios_enable_device() (Leon only)
  sh/PCI: Use default pcibios_enable_device()
  microblaze/PCI: Use default pcibios_enable_device()
  alpha/PCI: Use default pcibios_enable_device()
  PCI: Add "weak" generic pcibios_enable_device() implementation
  PCI: Don't enable decoding if BAR hasn't been assigned an address
  PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabled
  PCI: Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit
  PCI: Don't try to claim IORESOURCE_UNSET resources
  PCI: Check IORESOURCE_UNSET before updating BAR
  PCI: Don't clear IORESOURCE_UNSET when updating BAR
  PCI: Mark resources as IORESOURCE_UNSET if we can't assign them
  ...

Conflicts:
	arch/x86/include/asm/topology.h
	drivers/ata/ahci.c
2014-04-01 15:14:04 -07:00
Benjamin Herrenschmidt cd42748535 Merge remote-tracking branch 'scott/next' into next
Freescale updates from Scott. Mostly support for critical
and machine check exceptions on 64-bit BookE, some new
PCI suspend/resume work and misc bits.
2014-03-24 10:26:10 +11:00
Cody P Schafer 30daeb6c8f powerpc/perf: Add kconfig option for hypervisor provided counters
The commit adds a Kconfig option which allows the hv_gpci and hv_24x7
PMUs, added in the preceeding commits, to be built.

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-24 09:48:32 +11:00
Neelesh Gupta 7224adbbb8 powerpc/powernv: Enable fetching of platform sensor data
This patch enables fetching of various platform sensor data through
OPAL and expects a sensor handle from the driver to pass to OPAL.

Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-24 09:48:21 +11:00
Neelesh Gupta 4029cd6654 powerpc/powernv: Enable reading and updating of system parameters
This patch enables reading and updating of system parameters through
OPAL call.

Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-24 09:47:30 +11:00
Neelesh Gupta 8d72482322 powerpc/powernv: Infrastructure to support OPAL async completion
This patch adds support for notifying the clients of their request
completion. Clients request for the token before making OPAL call
and then wait for the response.

This patch uses messaging infrastructure to pull the data to linux
by registering itself for the message type OPAL_MSG_ASYNC_COMP.

Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-24 09:45:22 +11:00
Wang Dongsheng 48b16180d0 fsl/pci: The new pci suspend/resume implementation
If we do nothing in suspend/resume, some platform PCIe ip-block
can't guarantee the link back to L0 state from sleep, then, when
we read the EP device will hang. Only we send pme turnoff message
in pci controller suspend, and send pme exit message in resume, the
link state will be normal.

When we send pme turnoff message in pci controller suspend, the
links will into l2/l3 ready, then, host cannot communicate with
ep device, but pci-driver will call back EP device to save them
state. So we need to change platform_driver->suspend/resume to
syscore->suspend/resume.

So the new suspend/resume implementation, send pme turnoff message
in suspend, and send pme exit message in resume. And add a PME handler,
to response PME & message interrupt.

Change platform_driver->suspend/resume to syscore->suspend/resume.
pci-driver will call back EP device, to save EP state in
pci_pm_suspend_noirq, so we need to keep the link, until
pci_pm_suspend_noirq finish.

Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-03-19 22:37:44 -05:00
Zhao Qiang 0f5a869600 Corenet: Add QE platform support for Corenet
There is QE on platform T104x, add support.
Call funcs qe_ic_init and qe_init if CONFIG_QUICC_ENGINE is defined.

Signed-off-by: Zhao Qiang <B45475@freescale.com>
[scottwood@freesacle.com: whitespace fix]
Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-03-19 19:37:59 -05:00
Zhao Qiang 706f4aa035 QE: split function mpc85xx_qe_init() into two functions.
New QE doesn't have par_io, it doesn't need to init par_io
for new QE.
Split function mpc85xx_qe_init() into mpc85xx_qe_init()
and mpc85xx_qe_par_io_init().
Call mpc85xx_qe_init() for both new and old while
mpc85xx_qe_par_io_init() after mpc85xx_qe_init() for old.

Signed-off-by: Zhao Qiang <B45475@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-03-19 19:37:31 -05:00
Sebastian Siewior b0ad062cc4 powerpc: 85xx rdb: move np pointer to avoid builderror
If CONFIG_UCC_GETH or CONFIG_SERIAL_QE is not defined then we get a
warning about an used variable which leads to a build error.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-03-19 19:02:42 -05:00
Luis Henriques 3cae801695 powerpc/kconfig: Remove TSI108_BRIDGE duplicates
The MPC7448HPC2 and PPC_HOLLY config options contain TSI108_BRIDGE
duplicates since commit:

commit 3490cba56f
Author: Jon Loeliger <jdl@jdl.com>
Date:   Wed Jan 23 12:42:50 2008 -0600

    [POWERPC] Add initial iomega StorCenter board port.

This patch cleans these duplicates.

Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-03-19 16:14:44 -05:00
Grant Likely 75b57ecf9d of: Make device nodes kobjects so they show up in sysfs
Device tree nodes are already treated as objects, and we already want to
expose them to userspace which is done using the /proc filesystem today.
Right now the kernel has to do a lot of work to keep the /proc view in
sync with the in-kernel representation. If device_nodes are switched to
be kobjects then the device tree code can be a whole lot simpler. It
also turns out that switching to using /sysfs from /proc results in
smaller code and data size, and the userspace ABI won't change if
/proc/device-tree symlinks to /sys/firmware/devicetree/base.

v7: Add missing sysfs_bin_attr_init()
v6: Add __of_add_property() early init fixes from Pantelis
v5: Rename firmware/ofw to firmware/devicetree
    Fix updating property values in sysfs
v4: Fixed build error on Powerpc
    Fixed handling of dynamic nodes on powerpc
v3: Fixed handling of duplicate attribute and child node names
v2: switch to using sysfs bin_attributes which solve the problem of
    reporting incorrect property size.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
2014-03-11 20:48:26 +00:00
Ingo Molnar a02ed5e3e0 Merge branch 'sched/urgent' into sched/core
Pick up fixes before queueing up new changes.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-03-11 11:34:27 +01:00
Johannes Weiner e97ca8e5b8 mm: fix GFP_THISNODE callers and clarify
GFP_THISNODE is for callers that implement their own clever fallback to
remote nodes.  It restricts the allocation to the specified node and
does not invoke reclaim, assuming that the caller will take care of it
when the fallback fails, e.g.  through a subsequent allocation request
without GFP_THISNODE set.

However, many current GFP_THISNODE users only want the node exclusive
aspect of the flag, without actually implementing their own fallback or
triggering reclaim if necessary.  This results in things like page
migration failing prematurely even when there is easily reclaimable
memory available, unless kswapd happens to be running already or a
concurrent allocation attempt triggers the necessary reclaim.

Convert all callsites that don't implement their own fallback strategy
to __GFP_THISNODE.  This restricts the allocation a single node too, but
at the same time allows the allocator to enter the slowpath, wake
kswapd, and invoke direct reclaim if necessary, to make the allocation
happen when memory is full.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-10 17:26:19 -07:00