Commit Graph

667 Commits

Author SHA1 Message Date
David S. Miller 24d559cac4 [SPARC64]: store-init needs trailing membar.
The manual says that it is required and we actually have crash reports
where loads see stale data due to not having membars here.

In one case the networking does:

	memset(skb, 0, offsetof(struct sk_buff, truesize));

and then some code later checks skb->nohdr for zero, but it's still
the value that was there before the memset().

Note that arch/sparc64/lib/xor.S already got this right.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-19 13:27:33 -07:00
David S. Miller db2f9f6d91 [SPARC64]: Use Kconfig.preempt
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-17 15:23:22 -07:00
David S. Miller d1acb4210a [SPARC64]: Get DEBUG_PAGEALLOC working again.
We have to make sure to use base-pagesize TLB entries even during the
early transition period where we need TLB miss handling but don't have
the kernel page tables setup yet for the linear region.

Also, it is necessary therefore to not use the 4MB TSB for these
translations, and instead use the normal kernel TSB.  This allows us
to also get rid of the 4MB tsb for debug builds which shrinks the
kernel a little bit.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-16 17:20:28 -07:00
David S. Miller bb8236f2b9 [SPARC64]: Add missing HPAGE_MASK masks on address parameters.
These pte loops all assume the passed in address is HPAGE
aligned, make sure that is actually true.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-12 22:55:39 -07:00
David S. Miller 50d266a3a1 [SPARC]: Hook up missing syscalls.
sys_mbind
sys_get_mempolicy
sys_set_mempolicy
sys_kexec_load
sys_move_pages
sys_getcpu
sys_epoll_pwait

This work is largely a result of David Woodhouse's most
excellent missing syscalls patch.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-12 19:58:18 -07:00
Mathieu Desnoyers c0a79b229a [SPARC64]: Fix atomicity of TIF update in flush_thread()
Fix atomicity of TIF update in flush_thread() for sparc64

Fixes correctly the race by using *_ti_thread_flag.

Race :

parent process executing :
sys_ptrace()
 (lock_kernel())
 (ptrace_get_task_struct(pid))
 arch_ptrace()
   ptrace_detach()
     ptrace_disable(child);
       clear_singlestep(child);
         clear_tsk_thread_flag(child, TIF_SINGLESTEP);
         (which clears the TIF_SINGLESTEP flag atomically from a different
          process)
 (put_task_struct(child))
 (unlock_kernel())

And at the same time, in the child process :
sys_execve()
 do_execve()
   search_binary_handler()
     load_elf_binary()
       flush_old_exec()
         flush_thread()
           doing a non-atomic thread flag update

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-10 00:19:49 -08:00
David S. Miller f6d0f9ea55 [SPARC]: Provide pci_device_to_OF_node() just like powerpc.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-02 15:22:51 -08:00
David S. Miller 45bcca67ed [SPARC]: Handle unresolvable resources better in of_device.c
Just leave them as zero if we couldn't calculate it.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-02 15:22:50 -08:00
David S. Miller b85cdd490a [SPARC]: Fix bus handling in build_device_resources().
We mistakedly modify 'bus' in the innermost loop.  What
should happen is that at each register index iteration,
we start with the same 'bus'.

So preserve it's value at the top level, and use a loop
local variable 'dbus' for iteration.

This bug causes registers other than the first to be
decoded improperly.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-02 15:22:49 -08:00
David S. Miller 5f1ef5108a [SPARC64]: Update defconfig.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-28 09:51:15 -08:00
David S. Miller bb4c18cbba [SPARC64]: Fix PCI interrupts on E450 et al.
When the PCI controller OBP node lacks an interrupt-map
and interrupt-map-mask property, we need to form the
INO by hand.  The PCI swizzle logic was not doing that
properly.

This was a regression added by the of_device code.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-27 09:46:52 -08:00
David S. Miller c5b002c1bf [SPARC64]: Update defconfig.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-26 11:35:50 -08:00
David S. Miller abfd336cd7 [SPARC64]: Fix arch_teardown_msi_irq().
Need to use get_irq_msi() not get_irq_data().

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-26 11:35:48 -08:00
David S. Miller 5746c99dfa [SPARC64]: virt_irq_free only needed when CONFIG_PCI_MSI
Noticed by Meelis Roos.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-26 11:35:46 -08:00
David S. Miller 34cc560e6a [SPARC]: Re-export saved_command_line to modules.
This reverts some bogosity from the dynamic command-line
changes made on sparc32 and sparc64.

Drivers such as drivers/sbus/char/openprom.c reference
saved_command_line, and can be modular.

The boot_command_line is __initdata, yet the dynamic command-line
changes add modular exports of that symbol, obviously wrong.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-12 15:15:48 -08:00
David S. Miller 1b51d3a08b [SPARC64]: We do not need ZONE_DMA.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-12 15:15:46 -08:00
Arjan van de Ven 5dfe4c964a [PATCH] mark struct file_operations const 2
Many struct file_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

[akpm@osdl.org: sparc64 fix]
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:44 -08:00
Alon Bar-Lev 383464c0fb [PATCH] Dynamic kernel command-line: sparc64
Rename saved_command_line into boot_command_line.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:39 -08:00
Eric W. Biederman 0e25338bc1 [PATCH] signal: use kill_pgrp not kill_pg in the sunos compatibility code
I am slowly moving to a model where all process killing is struct pid based
instead of pid_t based.  The sunos compatibility code is one of the last users
of the old pid_t based kill_pg in the kernel.  By being complete I allow for
the future removal of kill_pg from the kernel, which will ensure I don't miss
something.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:31 -08:00
Linus Torvalds c827ba4cb4 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Update defconfig.
  [SPARC64]: Add PCI MSI support on Niagara.
  [SPARC64] IRQ: Use irq_desc->chip_data instead of irq_desc->handler_data
  [SPARC64]: Add obppath sysfs attribute for SBUS and PCI devices.
  [PARTITION]: Add whole_disk attribute.
2007-02-11 11:37:45 -08:00
Kyle McMartin d4d23add3a [PATCH] Common compat_sys_sysinfo
I noticed that almost all architectures implemented exactly the same
sys32_sysinfo...  except parisc, where a bug was to be found in handling of
the uptime.  So let's remove a whole whack of code for fun and profit.
Cribbed compat_sys_sysinfo from x86_64's implementation, since I figured it
would be the best tested.

This patch incorporates Arnd's suggestion of not using set_fs/get_fs, but
instead extracting out the common code from sys_sysinfo.

Cc: Christoph Hellwig <hch@infradead.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:32 -08:00
Tilman Schmidt 4564f9e5fd [PATCH] consolidate line discipline number definitions
The line discipline numbers N_* are currently defined for each architecture
individually, but (except for a seeming mistake) identically, in
asm/termios.h.  There is no obvious reason why these numbers should be
architecture specific, nor any apparent relationship with the termios
structure.  The total number of these, NR_LDISCS, is defined in linux/tty.h
anyway.  So I propose the following patch which moves the definitions of
the individual line disciplines to linux/tty.h too.

Three of these numbers (N_MASC, N_PROFIBUS_FDL, and N_SMSBLOCK) are unused
in the current kernel, but the patch still keeps the complete set in case
there are plans to use them yet.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:26 -08:00
Jean-Paul Saman 67d38229df [PATCH] disable init/initramfs.c: architectures
Update all arch/*/kernel/vmlinux.lds.S to not include space for initramfs
when CONFIG_BLK_DEV_INITRAMFS is not selected.  This saves another 4 kbytes
on most platfoms (some reserve PAGE_SIZE for initramfs).

Signed-off-by: Jean-Paul Saman <jean-paul.saman@nxp.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:25 -08:00
Christoph Lameter 5ac6da669e [PATCH] Set CONFIG_ZONE_DMA for arches with GENERIC_ISA_DMA
As Andi pointed out: CONFIG_GENERIC_ISA_DMA only disables the ISA DMA
channel management.  Other functionality may still expect GFP_DMA to
provide memory below 16M.  So we need to make sure that CONFIG_ZONE_DMA is
set independent of CONFIG_GENERIC_ISA_DMA.  Undo the modifications to
mm/Kconfig where we made ZONE_DMA dependent on GENERIC_ISA_DMA and set
theses explicitly in each arches Kconfig.

Reviews must occur for each arch in order to determine if ZONE_DMA can be
switched off.  It can only be switched off if we know that all devices
supported by a platform are capable of performing DMA transfers to all of
memory (Some arches already support this: uml, avr32, sh sh64, parisc and
IA64/Altix).

In order to switch ZONE_DMA off conditionally, one would have to establish
a scheme by which one can assure that no drivers are enabled that are only
capable of doing I/O to a part of memory, or one needs to provide an
alternate means of performing an allocation from a specific range of memory
(like provided by alloc_pages_range()) and insure that all drivers use that
call.  In that case the arches alloc_dma_coherent() may need to be modified
to call alloc_pages_range() instead of relying on GFP_DMA.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:19 -08:00
Christoph Lameter 9617729941 [PATCH] Drop free_pages()
nr_free_pages is now a simple access to a global variable.  Make it a macro
instead of a function.

The nr_free_pages now requires vmstat.h to be included.  There is one
occurrence in power management where we need to add the include.  Directly
refrer to global_page_state() there to clarify why the #include was added.

[akpm@osdl.org: arm build fix]
[akpm@osdl.org: sparc64 build fix]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:18 -08:00
David S. Miller 784020fb95 [SPARC64]: Update defconfig.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10 23:50:38 -08:00
David S. Miller 35a17eb6a8 [SPARC64]: Add PCI MSI support on Niagara.
This is kind of hokey, we could use the hardware provided facilities
much better.

MSIs are assosciated with MSI Queues.  MSI Queues generate interrupts
when any MSI assosciated with it is signalled.  This suggests a
two-tiered IRQ dispatch scheme:

	MSI Queue interrupt --> queue interrupt handler
		MSI dispatch --> driver interrupt handler

But we just get one-level under Linux currently.  What I'd like to do
is possibly stick the IRQ actions into a per-MSI-Queue data structure,
and dispatch them form there, but the generic IRQ layer doesn't
provide a way to do that right now.

So, the current kludge is to "ACK" the interrupt by processing the
MSI Queue data structures and ACK'ing them, then we run the actual
handler like normal.

We are wasting a lot of useful information, for example the MSI data
and address are provided with ever MSI, as well as a system tick if
available.  If we could pass this into the IRQ handler it could help
with certain things, in particular for PCI-Express error messages.

The MSI entries on sparc64 also tell you exactly which bus/device/fn
sent the MSI, which would be great for error handling when no
registered IRQ handler can service the interrupt.

We override the disable/enable IRQ chip methods in sun4v_msi, so we
have to call {mask,unmask}_msi_irq() directly from there.  This is
another ugly wart.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10 23:50:37 -08:00
David S. Miller 68c9218694 [SPARC64] IRQ: Use irq_desc->chip_data instead of irq_desc->handler_data
Otherwise we can't use the generic MSI code.

Furthermore, properly use the {get,set}_irq_foo() abstracted
interfaces instead of direct accesses to irq_desc[]->foo.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10 23:50:36 -08:00
Fabio Massimo Di Nitto cf69eab231 [SPARC64]: Add obppath sysfs attribute for SBUS and PCI devices.
Signed-off-by: Fabio Massimo Di Nitto <fabbione@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10 23:50:35 -08:00
David S. Miller 86d43258bc [SPARC64]: Set g4/g5 properly in sun4v dtlb-prot handling.
Mirror the logic in the sun4u handler, we have to update
both registers even when we branch out to window fault
fixup handling.

The way it works is that if we are in etrap processing a
fault already, g4/g5 holds the original fault information.
If we take a window spill fault while doing etrap, then
we put the window spill fault info into g4/g5 and this is
what the top-level fault handler ends up processing first.

Then we retry the originally faulting instruction, and
process the original fault at that time.

This is all necessary because of how constrained the trap
registers are in these code paths.  These cases trigger
very rarely, so even if there is some performance implication
it's doesn't happen very often.  In fact the rarity is why
it took so long to trigger and find this particular bug.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-01-26 18:56:01 -08:00
Gautham R Shenoy b282b6f8a8 [PATCH] Change cpu_up and co from __devinit to __cpuinit
Compiling the kernel with CONFIG_HOTPLUG = y and CONFIG_HOTPLUG_CPU = n
with CONFIG_RELOCATABLE = y generates the following modpost warnings

WARNING: vmlinux - Section mismatch: reference to .init.data: from
.text between '_cpu_up' (at offset 0xc0141b7d) and 'cpu_up'
WARNING: vmlinux - Section mismatch: reference to .init.data: from
.text between '_cpu_up' (at offset 0xc0141b9c) and 'cpu_up'
WARNING: vmlinux - Section mismatch: reference to .init.text:__cpu_up
from .text between '_cpu_up' (at offset 0xc0141bd8) and 'cpu_up'
WARNING: vmlinux - Section mismatch: reference to .init.data: from
.text between '_cpu_up' (at offset 0xc0141c05) and 'cpu_up'
WARNING: vmlinux - Section mismatch: reference to .init.data: from
.text between '_cpu_up' (at offset 0xc0141c26) and 'cpu_up'
WARNING: vmlinux - Section mismatch: reference to .init.data: from
.text between '_cpu_up' (at offset 0xc0141c37) and 'cpu_up'

This is because cpu_up, _cpu_up and __cpu_up (in some architectures) are
defined as __devinit
AND
__cpu_up calls some __cpuinit functions.

Since __cpuinit would map to __init with this kind of a configuration,
we get a .text refering .init.data warning.

This patch solves the problem by converting all of __cpu_up, _cpu_up
and cpu_up from __devinit to __cpuinit. The approach is justified since
the callers of cpu_up are either dependent on CONFIG_HOTPLUG_CPU or
are of __init type.

Thus when CONFIG_HOTPLUG_CPU=y, all these cpu up functions would land up
in .text section, and when CONFIG_HOTPLUG_CPU=n, all these functions would
land up in .init section.

Tested on a i386 SMP machine running linux-2.6.20-rc3-mm1.

Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-11 18:18:20 -08:00
David S. Miller f4060c0dbb [SPARC64]: Handle ISA devices with no 'regs' property.
And this points out that the return value from
isa_dev_get_resource() and the 'pregs' arg to
isa_dev_get_irq() are totally unused.

Based upon a patch from Richard Mortimer <richm@oldelvet.org.uk>

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-31 14:06:07 -08:00
David S. Miller 55d0bef587 [SPARC64]: Update defconfig.
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-31 14:06:06 -08:00
David S. Miller e3a411a3df [SPARC64]: Fix of_iounmap() region release.
We need to pass in the resource otherwise we cannot
release the region properly.  We must know whether it is
an I/O or MEM resource.

Spotted by Eric Brower.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-31 14:06:05 -08:00
David S. Miller 6fc5bae797 [SPARC64]: Fix "mem=xxx" handling.
We were not being careful enough.  When we trim the physical
memory areas, we have to make sure we don't remove the kernel
image or initial ramdisk image ranges.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-31 14:06:04 -08:00
Soeren Sonnenburg 10f549fa15 [PATCH] make fn_keys work again on power/macbooks
The apple fn keys don't work anymore with 2.6.20-rc1.

The reason is that USB_HID_POWERBOOK appears in several files although
USB_HIDINPUT_POWERBOOK is the thing to be used.

The patch fixes this.

Cc: Greg KH <greg@kroah.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-30 10:55:55 -08:00
David S. Miller 5a089006bf [SPARC64]: Mirror x86_64's PERCPU_ENOUGH_ROOM definition.
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-17 14:06:59 -08:00
David S. Miller 729e7d7e4d [SPARC64]: Minor irq handling cleanups.
Use struct irq_chip instead of hw_interrupt_type.

Delete hw_resend_irq(), totally unused.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-17 14:06:56 -08:00
David S. Miller 15f1483404 [SPARC64]: Kill no-remapping-needed code in head.S
It branches around some necessary prom calls, which we would
need to do even if we are mapped at the correct location already.
So it doesn't work.

The idea was that this sort of thing could be used for the eventual
kexec implementation, but it is clear that this will need to be
done differently.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-17 14:06:55 -08:00
Robert P. J. Day 5cbded585d [PATCH] getting rid of all casts of k[cmz]alloc() calls
Run this:

	#!/bin/sh
	for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do
	  echo "De-casting $f..."
	  perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f
	done

And then go through and reinstate those cases where code is casting pointers
to non-pointers.

And then drop a few hunks which conflicted with outstanding work.

Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Greg KH <greg@kroah.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Paul Fulghum <paulkf@microgate.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Karsten Keil <kkeil@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Ian Kent <raven@themaw.net>
Cc: Steven French <sfrench@us.ibm.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 09:05:58 -08:00
David S. Miller f088258966 [SPARC64]: Fix several kprobes bugs.
- relbranch_fixup(), for non-branches, would end up setting
  regs->tnpc incorrectly, in fact it would set it equal to
  regs->tpc which would cause that instruction to execute twice

  Also, if this is not a PC-relative branch, we should just
  leave regs->tnpc as-is.  This covers cases like 'jmpl' which
  branch to absolute values.

- To be absolutely %100 safe, we need to flush the instruction
  cache for all assignments to kprobe->ainsn.insn[], including
  cases like add_aggr_kprobe()

- prev_kprobe's status field needs to be 'unsigned long' to match
  the type of the value it is saving

- jprobes were totally broken:
  = jprobe_return() can run in the stack frame of the jprobe handler,
    or in an even deeper stack frame, thus we'll be in the wrong
    register window than the one from the original probe state.

    So unwind using 'restore' instructions, if necessary, right
    before we do the jprobe_return() breakpoint trap.

  = There is no reason to save/restore the register window saved
    at %sp at jprobe trigger time.  Those registers cannot be
    modified by the jprobe handler.  Also, this code was saving
    and restoring "sizeof (struct sparc_stackf)" bytes.  Depending
    upon the caller, this could clobber unrelated stack frame
    pieces if there is only a basic 128-byte register window
    stored on the stack, without the argument save area.

    So just saving and restoring struct pt_regs is sufficient.

  = Kill the "jprobe_saved_esp", totally unused.

    Also, delete "jprobe_saved_regs_location", with the stack frame
    unwind now done explicitly by jprobe_return(), this check is
    superfluous.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-10 02:42:03 -08:00
David S. Miller 2f149228bb [SPARC64]: Update defconfig.
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-10 02:40:49 -08:00
Alexey Dobriyan 35bca36cf7 [SPARC{32,64}]: Propagate ptrace_traceme() return value.
ptrace_traceme() consolidation made

	ret = ptrace_traceme();

dead write.

Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-10 02:40:27 -08:00
Yan Burman 982c2064d9 [SPARC64]: Replace kmalloc+memset with kzalloc
Replace kmalloc+memset with kzalloc

Signed-off-by: Yan Burman <burman.yan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-10 02:40:18 -08:00
David S. Miller a2c1e064c4 [SPARC64]: Run ctrl-alt-del action for sun4v powerdown request.
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-10 02:39:51 -08:00
David S. Miller c449c38b5d [SPARC64]: Unaligned accesses to userspace are hard errors.
Userspace is forbidden from making unaligned loads and
stores.  So if we get an unaligned trap due to a
{get,put}_user(), signal a fault and run the exception
handler.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-10 02:39:39 -08:00
David S. Miller 6e7726e16f [SPARC64]: Call do_mathemu on illegal instruction traps too.
To add this logic, put the VIS instruction check at the
vis_emul() call site instead of inside of vis_emul().

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-10 02:39:32 -08:00
David S. Miller 042cf50cfd [SPARC64]: Update defconfig.
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-10 02:39:18 -08:00
David S. Miller 10e267234c [SPARC64]: Add irqtrace/stacktrace/lockdep support.
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-10 02:39:09 -08:00
David Howells f0d1b0b30d [PATCH] LOG2: Implement a general integer log2 facility in the kernel
This facility provides three entry points:

	ilog2()		Log base 2 of unsigned long
	ilog2_u32()	Log base 2 of u32
	ilog2_u64()	Log base 2 of u64

These facilities can either be used inside functions on dynamic data:

	int do_something(long q)
	{
		...;
		y = ilog2(x)
		...;
	}

Or can be used to statically initialise global variables with constant values:

	unsigned n = ilog2(27);

When performing static initialisation, the compiler will report "error:
initializer element is not constant" if asked to take a log of zero or of
something not reducible to a constant.  They treat negative numbers as
unsigned.

When not dealing with a constant, they fall back to using fls() which permits
them to use arch-specific log calculation instructions - such as BSR on
x86/x86_64 or SCAN on FRV - if available.

[akpm@osdl.org: MMC fix]
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David Howells <dhowells@redhat.com>
Cc: Wojtek Kaniewski <wojtekka@toxygen.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:51 -08:00