/* * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8]) * MMC (Microscheduled Management Command) handling * * Copyright (C) 2005-2006 Intel Corporation * Inaky Perez-Gonzalez * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License version * 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA * 02110-1301, USA. * * * WUIEs and MMC IEs...well, they are almost the same at the end. MMC * IEs are Wireless USB IEs that go into the MMC period...[what is * that? look in Design-overview.txt]. * * * This is a simple subsystem to keep track of which IEs are being * sent by the host in the MMC period. * * For each WUIE we ask to send, we keep it in an array, so we can * request its removal later, or replace the content. They are tracked * by pointer, so be sure to use the same pointer if you want to * remove it or update the contents. * * FIXME: * - add timers that autoremove intervalled IEs? */ #include #include "wusbhc.h" /* Initialize the MMCIEs handling mechanism */ int wusbhc_mmcie_create(struct wusbhc *wusbhc) { u8 mmcies = wusbhc->mmcies_max; wusbhc->mmcie = kcalloc(mmcies, sizeof(wusbhc->mmcie[0]), GFP_KERNEL); if (wusbhc->mmcie == NULL) return -ENOMEM; mutex_init(&wusbhc->mmcie_mutex); return 0; } /* Release resources used by the MMCIEs handling mechanism */ void wusbhc_mmcie_destroy(struct wusbhc *wusbhc) { kfree(wusbhc->mmcie); } /* * Add or replace an MMC Wireless USB IE. * * @interval: See WUSB1.0[8.5.3.1] * @repeat_cnt: See WUSB1.0[8.5.3.1] * @handle: See WUSB1.0[8.5.3.1] * @wuie: Pointer to the header of the WUSB IE data to add. * MUST BE allocated in a kmalloc buffer (no stack or * vmalloc). * THE CALLER ALWAYS OWNS THE POINTER (we don't free it * on remove, we just forget about it). * @returns: 0 if ok, < 0 errno code on error. * * Goes over the *whole* @wusbhc->mmcie array looking for (a) the * first free spot and (b) if @wuie is already in the array (aka: * transmitted in the MMCs) the spot were it is. * * If present, we "overwrite it" (update). * * * NOTE: Need special ordering rules -- see below WUSB1.0 Table 7-38. * The host uses the handle as the 'sort' index. We * allocate the last one always for the WUIE_ID_HOST_INFO, and * the rest, first come first serve in inverse order. * * Host software must make sure that it adds the other IEs in * the right order... the host hardware is responsible for * placing the WCTA IEs in the right place with the other IEs * set by host software. * * NOTE: we can access wusbhc->wa_descr without locking because it is * read only. */ int wusbhc_mmcie_set(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt, struct wuie_hdr *wuie) { int result = -ENOBUFS; unsigned handle, itr; /* Search a handle, taking into account the ordering */ mutex_lock(&wusbhc->mmcie_mutex); switch (wuie->bIEIdentifier) { case WUIE_ID_HOST_INFO: /* Always last */ handle = wusbhc->mmcies_max - 1; break; case WUIE_ID_ISOCH_DISCARD: dev_err(wusbhc->dev, "Special ordering case for WUIE ID 0x%x " "unimplemented\n", wuie->bIEIdentifier); result = -ENOSYS; goto error_unlock; default: /* search for it or find the last empty slot */ handle = ~0; for (itr = 0; itr < wusbhc->mmcies_max - 1; itr++) { if (wusbhc->mmcie[itr] == wuie) { handle = itr; break; } if (wusbhc->mmcie[itr] == NULL) handle = itr; } if (handle == ~0) goto error_unlock; } result = (wusbhc->mmcie_add)(wusbhc, interval, repeat_cnt, handle, wuie); if (result >= 0) wusbhc->mmcie[handle] = wuie; error_unlock: mutex_unlock(&wusbhc->mmcie_mutex); return result; } EXPORT_SYMBOL_GPL(wusbhc_mmcie_set); /* * Remove an MMC IE previously added with wusbhc_mmcie_set() * * @wuie Pointer used to add the WUIE */ void wusbhc_mmcie_rm(struct wusbhc *wusbhc, struct wuie_hdr *wuie) { int result; unsigned handle, itr; mutex_lock(&wusbhc->mmcie_mutex); for (itr = 0; itr < wusbhc->mmcies_max; itr++) { if (wusbhc->mmcie[itr] == wuie) { handle = itr; goto found; } } mutex_unlock(&wusbhc->mmcie_mutex); return; found: result = (wusbhc->mmcie_rm)(wusbhc, handle); if (result == 0) wusbhc->mmcie[itr] = NULL; mutex_unlock(&wusbhc->mmcie_mutex); } EXPORT_SYMBOL_GPL(wusbhc_mmcie_rm); /* * wusbhc_start - start transmitting MMCs and accepting connections * @wusbhc: the HC to start * @chid: the CHID to use for this host * * Establishes a cluster reservation, enables device connections, and * starts MMCs with appropriate DNTS parameters. */ int wusbhc_start(struct wusbhc *wusbhc, const struct wusb_ckhdid *chid) { int result; struct device *dev = wusbhc->dev; WARN_ON(wusbhc->wuie_host_info != NULL); result = wusbhc_rsv_establish(wusbhc); if (result < 0) { dev_err(dev, "cannot establish cluster reservation: %d\n", result); goto error_rsv_establish; } result = wusbhc_devconnect_start(wusbhc, chid); if (result < 0) { dev_err(dev, "error enabling device connections: %d\n", result); goto error_devconnect_start; } result = wusbhc_sec_start(wusbhc); if (result < 0) { dev_err(dev, "error starting security in the HC: %d\n", result); goto error_sec_start; } /* FIXME: the choice of the DNTS parameters is somewhat * arbitrary */ result = wusbhc->set_num_dnts(wusbhc, 0, 15); if (result < 0) { dev_err(dev, "Cannot set DNTS parameters: %d\n", result); goto error_set_num_dnts; } result = wusbhc->start(wusbhc); if (result < 0) { dev_err(dev, "error starting wusbch: %d\n", result); goto error_wusbhc_start; } wusbhc->active = 1; return 0; error_wusbhc_start: wusbhc_sec_stop(wusbhc); error_set_num_dnts: error_sec_start: wusbhc_devconnect_stop(wusbhc); error_devconnect_start: wusbhc_rsv_terminate(wusbhc); error_rsv_establish: return result; } /* * Disconnect all from the WUSB Channel * * Send a Host Disconnect IE in the MMC, wait, don't send it any more */ static int __wusbhc_host_disconnect_ie(struct wusbhc *wusbhc) { int result = -ENOMEM; struct wuie_host_disconnect *host_disconnect_ie; might_sleep(); host_disconnect_ie = kmalloc(sizeof(*host_disconnect_ie), GFP_KERNEL); if (host_disconnect_ie == NULL) goto error_alloc; host_disconnect_ie->hdr.bLength = sizeof(*host_disconnect_ie); host_disconnect_ie->hdr.bIEIdentifier = WUIE_ID_HOST_DISCONNECT; result = wusbhc_mmcie_set(wusbhc, 0, 0, &host_disconnect_ie->hdr); if (result < 0) goto error_mmcie_set; /* WUSB1.0[8.5.3.1 & 7.5.2] */ msleep(100); wusbhc_mmcie_rm(wusbhc, &host_disconnect_ie->hdr); error_mmcie_set: kfree(host_disconnect_ie); error_alloc: return result; } /* * wusbhc_stop - stop transmitting MMCs * @wusbhc: the HC to stop * * Stops the WUSB channel and removes the cluster reservation. */ void wusbhc_stop(struct wusbhc *wusbhc) { if (wusbhc->active) { wusbhc->active = 0; wusbhc->stop(wusbhc, WUSB_CHANNEL_STOP_DELAY_MS); wusbhc_sec_stop(wusbhc); wusbhc_devconnect_stop(wusbhc); wusbhc_rsv_terminate(wusbhc); } } EXPORT_SYMBOL_GPL(wusbhc_stop); /* * Change the CHID in a WUSB Channel * * If it is just a new CHID, send a Host Disconnect IE and then change * the CHID IE. */ static int __wusbhc_chid_change(struct wusbhc *wusbhc, const struct wusb_ckhdid *chid) { int result = -ENOSYS; struct device *dev = wusbhc->dev; dev_err(dev, "%s() not implemented yet\n", __func__); return result; BUG_ON(wusbhc->wuie_host_info == NULL); __wusbhc_host_disconnect_ie(wusbhc); wusbhc->wuie_host_info->CHID = *chid; result = wusbhc_mmcie_set(wusbhc, 0, 0, &wusbhc->wuie_host_info->hdr); if (result < 0) dev_err(dev, "Can't update Host Info WUSB IE: %d\n", result); return result; } /* * Set/reset/update a new CHID * * Depending on the previous state of the MMCs, start, stop or change * the sent MMC. This effectively switches the host controller on and * off (radio wise). */ int wusbhc_chid_set(struct wusbhc *wusbhc, const struct wusb_ckhdid *chid) { int result = 0; if (memcmp(chid, &wusb_ckhdid_zero, sizeof(chid)) == 0) chid = NULL; mutex_lock(&wusbhc->mutex); if (wusbhc->active) { if (chid) result = __wusbhc_chid_change(wusbhc, chid); else wusbhc_stop(wusbhc); } else { if (chid) wusbhc_start(wusbhc, chid); } mutex_unlock(&wusbhc->mutex); return result; } EXPORT_SYMBOL_GPL(wusbhc_chid_set);