/* * MUSB OTG driver virtual root hub support * * Copyright 2005 Mentor Graphics Corporation * Copyright (C) 2005-2006 by Texas Instruments * Copyright (C) 2006-2007 Nokia Corporation * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA * 02110-1301 USA * * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include "musb_core.h" static void musb_port_suspend(struct musb *musb, bool do_suspend) { u8 power; void __iomem *mbase = musb->mregs; if (!is_host_active(musb)) return; /* NOTE: this doesn't necessarily put PHY into low power mode, * turning off its clock; that's a function of PHY integration and * MUSB_POWER_ENSUSPEND. PHY may need a clock (sigh) to detect * SE0 changing to connect (J) or wakeup (K) states. */ power = musb_readb(mbase, MUSB_POWER); if (do_suspend) { int retries = 10000; power &= ~MUSB_POWER_RESUME; power |= MUSB_POWER_SUSPENDM; musb_writeb(mbase, MUSB_POWER, power); /* Needed for OPT A tests */ power = musb_readb(mbase, MUSB_POWER); while (power & MUSB_POWER_SUSPENDM) { power = musb_readb(mbase, MUSB_POWER); if (retries-- < 1) break; } DBG(3, "Root port suspended, power %02x\n", power); musb->port1_status |= USB_PORT_STAT_SUSPEND; switch (musb->xceiv->state) { case OTG_STATE_A_HOST: musb->xceiv->state = OTG_STATE_A_SUSPEND; musb->is_active = is_otg_enabled(musb) && musb->xceiv->host->b_hnp_enable; musb_platform_try_idle(musb, 0); break; #ifdef CONFIG_USB_MUSB_OTG case OTG_STATE_B_HOST: musb->xceiv->state = OTG_STATE_B_WAIT_ACON; musb->is_active = is_otg_enabled(musb) && musb->xceiv->host->b_hnp_enable; musb_platform_try_idle(musb, 0); break; #endif default: DBG(1, "bogus rh suspend? %s\n", otg_state_string(musb)); } } else if (power & MUSB_POWER_SUSPENDM) { power &= ~MUSB_POWER_SUSPENDM; power |= MUSB_POWER_RESUME; musb_writeb(mbase, MUSB_POWER, power); DBG(3, "Root port resuming, power %02x\n", power); /* later, GetPortStatus will stop RESUME signaling */ musb->port1_status |= MUSB_PORT_STAT_RESUME; musb->rh_timer = jiffies + msecs_to_jiffies(20); } } static void musb_port_reset(struct musb *musb, bool do_reset) { u8 power; void __iomem *mbase = musb->mregs; #ifdef CONFIG_USB_MUSB_OTG if (musb->xceiv->state == OTG_STATE_B_IDLE) { DBG(2, "HNP: Returning from HNP; no hub reset from b_idle\n"); musb->port1_status &= ~USB_PORT_STAT_RESET; return; } #endif if (!is_host_active(musb)) return; /* NOTE: caller guarantees it will turn off the reset when * the appropriate amount of time has passed */ power = musb_readb(mbase, MUSB_POWER); if (do_reset) { /* * If RESUME is set, we must make sure it stays minimum 20 ms. * Then we must clear RESUME and wait a bit to let musb start * generating SOFs. If we don't do this, OPT HS A 6.8 tests * fail with "Error! Did not receive an SOF before suspend * detected". */ if (power & MUSB_POWER_RESUME) { while (time_before(jiffies, musb->rh_timer)) msleep(1); musb_writeb(mbase, MUSB_POWER, power & ~MUSB_POWER_RESUME); msleep(1); } musb->ignore_disconnect = true; power &= 0xf0; musb_writeb(mbase, MUSB_POWER, power | MUSB_POWER_RESET); musb->port1_status |= USB_PORT_STAT_RESET; musb->port1_status &= ~USB_PORT_STAT_ENABLE; musb->rh_timer = jiffies + msecs_to_jiffies(50); } else { DBG(4, "root port reset stopped\n"); musb_writeb(mbase, MUSB_POWER, power & ~MUSB_POWER_RESET); musb->ignore_disconnect = false; power = musb_readb(mbase, MUSB_POWER); if (power & MUSB_POWER_HSMODE) { DBG(4, "high-speed device connected\n"); musb->port1_status |= USB_PORT_STAT_HIGH_SPEED; } musb->port1_status &= ~USB_PORT_STAT_RESET; musb->port1_status |= USB_PORT_STAT_ENABLE | (USB_PORT_STAT_C_RESET << 16) | (USB_PORT_STAT_C_ENABLE << 16); usb_hcd_poll_rh_status(musb_to_hcd(musb)); musb->vbuserr_retry = VBUSERR_RETRY_COUNT; } } void musb_root_disconnect(struct musb *musb) { musb->port1_status = (1 << USB_PORT_FEAT_POWER) | (1 << USB_PORT_FEAT_C_CONNECTION); usb_hcd_poll_rh_status(musb_to_hcd(musb)); musb->is_active = 0; switch (musb->xceiv->state) { case OTG_STATE_A_HOST: case OTG_STATE_A_SUSPEND: musb->xceiv->state = OTG_STATE_A_WAIT_BCON; musb->is_active = 0; break; case OTG_STATE_A_WAIT_VFALL: musb->xceiv->state = OTG_STATE_B_IDLE; break; default: DBG(1, "host disconnect (%s)\n", otg_state_string(musb)); } } /*---------------------------------------------------------------------*/ /* Caller may or may not hold musb->lock */ int musb_hub_status_data(struct usb_hcd *hcd, char *buf) { struct musb *musb = hcd_to_musb(hcd); int retval = 0; /* called in_irq() via usb_hcd_poll_rh_status() */ if (musb->port1_status & 0xffff0000) { *buf = 0x02; retval = 1; } return retval; } int musb_hub_control( struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) { struct musb *musb = hcd_to_musb(hcd); u32 temp; int retval = 0; unsigned long flags; spin_lock_irqsave(&musb->lock, flags); if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) { spin_unlock_irqrestore(&musb->lock, flags); return -ESHUTDOWN; } /* hub features: always zero, setting is a NOP * port features: reported, sometimes updated when host is active * no indicators */ switch (typeReq) { case ClearHubFeature: case SetHubFeature: switch (wValue) { case C_HUB_OVER_CURRENT: case C_HUB_LOCAL_POWER: break; default: goto error; } break; case ClearPortFeature: if ((wIndex & 0xff) != 1) goto error; switch (wValue) { case USB_PORT_FEAT_ENABLE: break; case USB_PORT_FEAT_SUSPEND: musb_port_suspend(musb, false); break; case USB_PORT_FEAT_POWER: if (!(is_otg_enabled(musb) && hcd->self.is_b_host)) musb_set_vbus(musb, 0); break; case USB_PORT_FEAT_C_CONNECTION: case USB_PORT_FEAT_C_ENABLE: case USB_PORT_FEAT_C_OVER_CURRENT: case USB_PORT_FEAT_C_RESET: case USB_PORT_FEAT_C_SUSPEND: break; default: goto error; } DBG(5, "clear feature %d\n", wValue); musb->port1_status &= ~(1 << wValue); break; case GetHubDescriptor: { struct usb_hub_descriptor *desc = (void *)buf; desc->bDescLength = 9; desc->bDescriptorType = 0x29; desc->bNbrPorts = 1; desc->wHubCharacteristics = cpu_to_le16( 0x0001 /* per-port power switching */ | 0x0010 /* no overcurrent reporting */ ); desc->bPwrOn2PwrGood = 5; /* msec/2 */ desc->bHubContrCurrent = 0; /* workaround bogus struct definition */ desc->DeviceRemovable[0] = 0x02; /* port 1 */ desc->DeviceRemovable[1] = 0xff; } break; case GetHubStatus: temp = 0; *(__le32 *) buf = cpu_to_le32(temp); break; case GetPortStatus: if (wIndex != 1) goto error; /* finish RESET signaling? */ if ((musb->port1_status & USB_PORT_STAT_RESET) && time_after_eq(jiffies, musb->rh_timer)) musb_port_reset(musb, false); /* finish RESUME signaling? */ if ((musb->port1_status & MUSB_PORT_STAT_RESUME) && time_after_eq(jiffies, musb->rh_timer)) { u8 power; power = musb_readb(musb->mregs, MUSB_POWER); power &= ~MUSB_POWER_RESUME; DBG(4, "root port resume stopped, power %02x\n", power); musb_writeb(musb->mregs, MUSB_POWER, power); /* ISSUE: DaVinci (RTL 1.300) disconnects after * resume of high speed peripherals (but not full * speed ones). */ musb->is_active = 1; musb->port1_status &= ~(USB_PORT_STAT_SUSPEND | MUSB_PORT_STAT_RESUME); musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16; usb_hcd_poll_rh_status(musb_to_hcd(musb)); /* NOTE: it might really be A_WAIT_BCON ... */ musb->xceiv->state = OTG_STATE_A_HOST; } put_unaligned(cpu_to_le32(musb->port1_status & ~MUSB_PORT_STAT_RESUME), (__le32 *) buf); /* port change status is more interesting */ DBG(get_unaligned((u16 *)(buf+2)) ? 2 : 5, "port status %08x\n", musb->port1_status); break; case SetPortFeature: if ((wIndex & 0xff) != 1) goto error; switch (wValue) { case USB_PORT_FEAT_POWER: /* NOTE: this controller has a strange state machine * that involves "requesting sessions" according to * magic side effects from incompletely-described * rules about startup... * * This call is what really starts the host mode; be * very careful about side effects if you reorder any * initialization logic, e.g. for OTG, or change any * logic relating to VBUS power-up. */ if (!(is_otg_enabled(musb) && hcd->self.is_b_host)) musb_start(musb); break; case USB_PORT_FEAT_RESET: musb_port_reset(musb, true); break; case USB_PORT_FEAT_SUSPEND: musb_port_suspend(musb, true); break; case USB_PORT_FEAT_TEST: if (unlikely(is_host_active(musb))) goto error; wIndex >>= 8; switch (wIndex) { case 1: pr_debug("TEST_J\n"); temp = MUSB_TEST_J; break; case 2: pr_debug("TEST_K\n"); temp = MUSB_TEST_K; break; case 3: pr_debug("TEST_SE0_NAK\n"); temp = MUSB_TEST_SE0_NAK; break; case 4: pr_debug("TEST_PACKET\n"); temp = MUSB_TEST_PACKET; musb_load_testpacket(musb); break; case 5: pr_debug("TEST_FORCE_ENABLE\n"); temp = MUSB_TEST_FORCE_HOST | MUSB_TEST_FORCE_HS; musb_writeb(musb->mregs, MUSB_DEVCTL, MUSB_DEVCTL_SESSION); break; case 6: pr_debug("TEST_FIFO_ACCESS\n"); temp = MUSB_TEST_FIFO_ACCESS; break; default: goto error; } musb_writeb(musb->mregs, MUSB_TESTMODE, temp); break; default: goto error; } DBG(5, "set feature %d\n", wValue); musb->port1_status |= 1 << wValue; break; default: error: /* "protocol stall" on error */ retval = -EPIPE; } spin_unlock_irqrestore(&musb->lock, flags); return retval; }