linux/drivers/net/irda/girbil-sir.c

259 lines
6.1 KiB
C

/*********************************************************************
*
* Filename: girbil.c
* Version: 1.2
* Description: Implementation for the Greenwich GIrBIL dongle
* Status: Experimental.
* Author: Dag Brattli <dagb@cs.uit.no>
* Created at: Sat Feb 6 21:02:33 1999
* Modified at: Fri Dec 17 09:13:20 1999
* Modified by: Dag Brattli <dagb@cs.uit.no>
*
* Copyright (c) 1999 Dag Brattli, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* Neither Dag Brattli nor University of Tromsø admit liability nor
* provide warranty for any of this software. This material is
* provided "AS-IS" and at no charge.
*
********************************************************************/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <net/irda/irda.h>
#include "sir-dev.h"
static int girbil_reset(struct sir_dev *dev);
static int girbil_open(struct sir_dev *dev);
static int girbil_close(struct sir_dev *dev);
static int girbil_change_speed(struct sir_dev *dev, unsigned speed);
/* Control register 1 */
#define GIRBIL_TXEN 0x01 /* Enable transmitter */
#define GIRBIL_RXEN 0x02 /* Enable receiver */
#define GIRBIL_ECAN 0x04 /* Cancel self emitted data */
#define GIRBIL_ECHO 0x08 /* Echo control characters */
/* LED Current Register (0x2) */
#define GIRBIL_HIGH 0x20
#define GIRBIL_MEDIUM 0x21
#define GIRBIL_LOW 0x22
/* Baud register (0x3) */
#define GIRBIL_2400 0x30
#define GIRBIL_4800 0x31
#define GIRBIL_9600 0x32
#define GIRBIL_19200 0x33
#define GIRBIL_38400 0x34
#define GIRBIL_57600 0x35
#define GIRBIL_115200 0x36
/* Mode register (0x4) */
#define GIRBIL_IRDA 0x40
#define GIRBIL_ASK 0x41
/* Control register 2 (0x5) */
#define GIRBIL_LOAD 0x51 /* Load the new baud rate value */
static struct dongle_driver girbil = {
.owner = THIS_MODULE,
.driver_name = "Greenwich GIrBIL",
.type = IRDA_GIRBIL_DONGLE,
.open = girbil_open,
.close = girbil_close,
.reset = girbil_reset,
.set_speed = girbil_change_speed,
};
static int __init girbil_sir_init(void)
{
return irda_register_dongle(&girbil);
}
static void __exit girbil_sir_cleanup(void)
{
irda_unregister_dongle(&girbil);
}
static int girbil_open(struct sir_dev *dev)
{
struct qos_info *qos = &dev->qos;
IRDA_DEBUG(2, "%s()\n", __func__);
/* Power on dongle */
sirdev_set_dtr_rts(dev, TRUE, TRUE);
qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
qos->min_turn_time.bits = 0x03;
irda_qos_bits_to_value(qos);
/* irda thread waits 50 msec for power settling */
return 0;
}
static int girbil_close(struct sir_dev *dev)
{
IRDA_DEBUG(2, "%s()\n", __func__);
/* Power off dongle */
sirdev_set_dtr_rts(dev, FALSE, FALSE);
return 0;
}
/*
* Function girbil_change_speed (dev, speed)
*
* Set the speed for the Girbil type dongle.
*
*/
#define GIRBIL_STATE_WAIT_SPEED (SIRDEV_STATE_DONGLE_SPEED + 1)
static int girbil_change_speed(struct sir_dev *dev, unsigned speed)
{
unsigned state = dev->fsm.substate;
unsigned delay = 0;
u8 control[2];
static int ret = 0;
IRDA_DEBUG(2, "%s()\n", __func__);
/* dongle alread reset - port and dongle at default speed */
switch(state) {
case SIRDEV_STATE_DONGLE_SPEED:
/* Set DTR and Clear RTS to enter command mode */
sirdev_set_dtr_rts(dev, FALSE, TRUE);
udelay(25); /* better wait a little while */
ret = 0;
switch (speed) {
default:
ret = -EINVAL;
/* fall through */
case 9600:
control[0] = GIRBIL_9600;
break;
case 19200:
control[0] = GIRBIL_19200;
break;
case 34800:
control[0] = GIRBIL_38400;
break;
case 57600:
control[0] = GIRBIL_57600;
break;
case 115200:
control[0] = GIRBIL_115200;
break;
}
control[1] = GIRBIL_LOAD;
/* Write control bytes */
sirdev_raw_write(dev, control, 2);
dev->speed = speed;
state = GIRBIL_STATE_WAIT_SPEED;
delay = 100;
break;
case GIRBIL_STATE_WAIT_SPEED:
/* Go back to normal mode */
sirdev_set_dtr_rts(dev, TRUE, TRUE);
udelay(25); /* better wait a little while */
break;
default:
IRDA_ERROR("%s - undefined state %d\n", __func__, state);
ret = -EINVAL;
break;
}
dev->fsm.substate = state;
return (delay > 0) ? delay : ret;
}
/*
* Function girbil_reset (driver)
*
* This function resets the girbil dongle.
*
* Algorithm:
* 0. set RTS, and wait at least 5 ms
* 1. clear RTS
*/
#define GIRBIL_STATE_WAIT1_RESET (SIRDEV_STATE_DONGLE_RESET + 1)
#define GIRBIL_STATE_WAIT2_RESET (SIRDEV_STATE_DONGLE_RESET + 2)
#define GIRBIL_STATE_WAIT3_RESET (SIRDEV_STATE_DONGLE_RESET + 3)
static int girbil_reset(struct sir_dev *dev)
{
unsigned state = dev->fsm.substate;
unsigned delay = 0;
u8 control = GIRBIL_TXEN | GIRBIL_RXEN;
int ret = 0;
IRDA_DEBUG(2, "%s()\n", __func__);
switch (state) {
case SIRDEV_STATE_DONGLE_RESET:
/* Reset dongle */
sirdev_set_dtr_rts(dev, TRUE, FALSE);
/* Sleep at least 5 ms */
delay = 20;
state = GIRBIL_STATE_WAIT1_RESET;
break;
case GIRBIL_STATE_WAIT1_RESET:
/* Set DTR and clear RTS to enter command mode */
sirdev_set_dtr_rts(dev, FALSE, TRUE);
delay = 20;
state = GIRBIL_STATE_WAIT2_RESET;
break;
case GIRBIL_STATE_WAIT2_RESET:
/* Write control byte */
sirdev_raw_write(dev, &control, 1);
delay = 20;
state = GIRBIL_STATE_WAIT3_RESET;
break;
case GIRBIL_STATE_WAIT3_RESET:
/* Go back to normal mode */
sirdev_set_dtr_rts(dev, TRUE, TRUE);
dev->speed = 9600;
break;
default:
IRDA_ERROR("%s(), undefined state %d\n", __func__, state);
ret = -1;
break;
}
dev->fsm.substate = state;
return (delay > 0) ? delay : ret;
}
MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
MODULE_DESCRIPTION("Greenwich GIrBIL dongle driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("irda-dongle-4"); /* IRDA_GIRBIL_DONGLE */
module_init(girbil_sir_init);
module_exit(girbil_sir_cleanup);