b488893a39
This is the largest patch in the set. Make all (I hope) the places where the pid is shown to or get from user operate on the virtual pids. The idea is: - all in-kernel data structures must store either struct pid itself or the pid's global nr, obtained with pid_nr() call; - when seeking the task from kernel code with the stored id one should use find_task_by_pid() call that works with global pids; - when showing pid's numerical value to the user the virtual one should be used, but however when one shows task's pid outside this task's namespace the global one is to be used; - when getting the pid from userspace one need to consider this as the virtual one and use appropriate task/pid-searching functions. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: nuther build fix] [akpm@linux-foundation.org: yet nuther build fix] [akpm@linux-foundation.org: remove unneeded casts] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
564 lines
18 KiB
C
564 lines
18 KiB
C
/*
|
|
* Architecture-specific signal handling support.
|
|
*
|
|
* Copyright (C) 1999-2004 Hewlett-Packard Co
|
|
* David Mosberger-Tang <davidm@hpl.hp.com>
|
|
*
|
|
* Derived from i386 and Alpha versions.
|
|
*/
|
|
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/smp.h>
|
|
#include <linux/stddef.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/binfmts.h>
|
|
#include <linux/unistd.h>
|
|
#include <linux/wait.h>
|
|
|
|
#include <asm/ia32.h>
|
|
#include <asm/intrinsics.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/rse.h>
|
|
#include <asm/sigcontext.h>
|
|
|
|
#include "sigframe.h"
|
|
|
|
#define DEBUG_SIG 0
|
|
#define STACK_ALIGN 16 /* minimal alignment for stack pointer */
|
|
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
|
|
|
|
#if _NSIG_WORDS > 1
|
|
# define PUT_SIGSET(k,u) __copy_to_user((u)->sig, (k)->sig, sizeof(sigset_t))
|
|
# define GET_SIGSET(k,u) __copy_from_user((k)->sig, (u)->sig, sizeof(sigset_t))
|
|
#else
|
|
# define PUT_SIGSET(k,u) __put_user((k)->sig[0], &(u)->sig[0])
|
|
# define GET_SIGSET(k,u) __get_user((k)->sig[0], &(u)->sig[0])
|
|
#endif
|
|
|
|
asmlinkage long
|
|
sys_sigaltstack (const stack_t __user *uss, stack_t __user *uoss, long arg2,
|
|
long arg3, long arg4, long arg5, long arg6, long arg7,
|
|
struct pt_regs regs)
|
|
{
|
|
return do_sigaltstack(uss, uoss, regs.r12);
|
|
}
|
|
|
|
static long
|
|
restore_sigcontext (struct sigcontext __user *sc, struct sigscratch *scr)
|
|
{
|
|
unsigned long ip, flags, nat, um, cfm, rsc;
|
|
long err;
|
|
|
|
/* Always make any pending restarted system calls return -EINTR */
|
|
current_thread_info()->restart_block.fn = do_no_restart_syscall;
|
|
|
|
/* restore scratch that always needs gets updated during signal delivery: */
|
|
err = __get_user(flags, &sc->sc_flags);
|
|
err |= __get_user(nat, &sc->sc_nat);
|
|
err |= __get_user(ip, &sc->sc_ip); /* instruction pointer */
|
|
err |= __get_user(cfm, &sc->sc_cfm);
|
|
err |= __get_user(um, &sc->sc_um); /* user mask */
|
|
err |= __get_user(rsc, &sc->sc_ar_rsc);
|
|
err |= __get_user(scr->pt.ar_unat, &sc->sc_ar_unat);
|
|
err |= __get_user(scr->pt.ar_fpsr, &sc->sc_ar_fpsr);
|
|
err |= __get_user(scr->pt.ar_pfs, &sc->sc_ar_pfs);
|
|
err |= __get_user(scr->pt.pr, &sc->sc_pr); /* predicates */
|
|
err |= __get_user(scr->pt.b0, &sc->sc_br[0]); /* b0 (rp) */
|
|
err |= __get_user(scr->pt.b6, &sc->sc_br[6]); /* b6 */
|
|
err |= __copy_from_user(&scr->pt.r1, &sc->sc_gr[1], 8); /* r1 */
|
|
err |= __copy_from_user(&scr->pt.r8, &sc->sc_gr[8], 4*8); /* r8-r11 */
|
|
err |= __copy_from_user(&scr->pt.r12, &sc->sc_gr[12], 2*8); /* r12-r13 */
|
|
err |= __copy_from_user(&scr->pt.r15, &sc->sc_gr[15], 8); /* r15 */
|
|
|
|
scr->pt.cr_ifs = cfm | (1UL << 63);
|
|
scr->pt.ar_rsc = rsc | (3 << 2); /* force PL3 */
|
|
|
|
/* establish new instruction pointer: */
|
|
scr->pt.cr_iip = ip & ~0x3UL;
|
|
ia64_psr(&scr->pt)->ri = ip & 0x3;
|
|
scr->pt.cr_ipsr = (scr->pt.cr_ipsr & ~IA64_PSR_UM) | (um & IA64_PSR_UM);
|
|
|
|
scr->scratch_unat = ia64_put_scratch_nat_bits(&scr->pt, nat);
|
|
|
|
if (!(flags & IA64_SC_FLAG_IN_SYSCALL)) {
|
|
/* Restore most scratch-state only when not in syscall. */
|
|
err |= __get_user(scr->pt.ar_ccv, &sc->sc_ar_ccv); /* ar.ccv */
|
|
err |= __get_user(scr->pt.b7, &sc->sc_br[7]); /* b7 */
|
|
err |= __get_user(scr->pt.r14, &sc->sc_gr[14]); /* r14 */
|
|
err |= __copy_from_user(&scr->pt.ar_csd, &sc->sc_ar25, 2*8); /* ar.csd & ar.ssd */
|
|
err |= __copy_from_user(&scr->pt.r2, &sc->sc_gr[2], 2*8); /* r2-r3 */
|
|
err |= __copy_from_user(&scr->pt.r16, &sc->sc_gr[16], 16*8); /* r16-r31 */
|
|
}
|
|
|
|
if ((flags & IA64_SC_FLAG_FPH_VALID) != 0) {
|
|
struct ia64_psr *psr = ia64_psr(&scr->pt);
|
|
|
|
__copy_from_user(current->thread.fph, &sc->sc_fr[32], 96*16);
|
|
psr->mfh = 0; /* drop signal handler's fph contents... */
|
|
preempt_disable();
|
|
if (psr->dfh)
|
|
ia64_drop_fpu(current);
|
|
else {
|
|
/* We already own the local fph, otherwise psr->dfh wouldn't be 0. */
|
|
__ia64_load_fpu(current->thread.fph);
|
|
ia64_set_local_fpu_owner(current);
|
|
}
|
|
preempt_enable();
|
|
}
|
|
return err;
|
|
}
|
|
|
|
int
|
|
copy_siginfo_to_user (siginfo_t __user *to, siginfo_t *from)
|
|
{
|
|
if (!access_ok(VERIFY_WRITE, to, sizeof(siginfo_t)))
|
|
return -EFAULT;
|
|
if (from->si_code < 0) {
|
|
if (__copy_to_user(to, from, sizeof(siginfo_t)))
|
|
return -EFAULT;
|
|
return 0;
|
|
} else {
|
|
int err;
|
|
|
|
/*
|
|
* If you change siginfo_t structure, please be sure this code is fixed
|
|
* accordingly. It should never copy any pad contained in the structure
|
|
* to avoid security leaks, but must copy the generic 3 ints plus the
|
|
* relevant union member.
|
|
*/
|
|
err = __put_user(from->si_signo, &to->si_signo);
|
|
err |= __put_user(from->si_errno, &to->si_errno);
|
|
err |= __put_user((short)from->si_code, &to->si_code);
|
|
switch (from->si_code >> 16) {
|
|
case __SI_FAULT >> 16:
|
|
err |= __put_user(from->si_flags, &to->si_flags);
|
|
err |= __put_user(from->si_isr, &to->si_isr);
|
|
case __SI_POLL >> 16:
|
|
err |= __put_user(from->si_addr, &to->si_addr);
|
|
err |= __put_user(from->si_imm, &to->si_imm);
|
|
break;
|
|
case __SI_TIMER >> 16:
|
|
err |= __put_user(from->si_tid, &to->si_tid);
|
|
err |= __put_user(from->si_overrun, &to->si_overrun);
|
|
err |= __put_user(from->si_ptr, &to->si_ptr);
|
|
break;
|
|
case __SI_RT >> 16: /* Not generated by the kernel as of now. */
|
|
case __SI_MESGQ >> 16:
|
|
err |= __put_user(from->si_uid, &to->si_uid);
|
|
err |= __put_user(from->si_pid, &to->si_pid);
|
|
err |= __put_user(from->si_ptr, &to->si_ptr);
|
|
break;
|
|
case __SI_CHLD >> 16:
|
|
err |= __put_user(from->si_utime, &to->si_utime);
|
|
err |= __put_user(from->si_stime, &to->si_stime);
|
|
err |= __put_user(from->si_status, &to->si_status);
|
|
default:
|
|
err |= __put_user(from->si_uid, &to->si_uid);
|
|
err |= __put_user(from->si_pid, &to->si_pid);
|
|
break;
|
|
}
|
|
return err;
|
|
}
|
|
}
|
|
|
|
long
|
|
ia64_rt_sigreturn (struct sigscratch *scr)
|
|
{
|
|
extern char ia64_strace_leave_kernel, ia64_leave_kernel;
|
|
struct sigcontext __user *sc;
|
|
struct siginfo si;
|
|
sigset_t set;
|
|
long retval;
|
|
|
|
sc = &((struct sigframe __user *) (scr->pt.r12 + 16))->sc;
|
|
|
|
/*
|
|
* When we return to the previously executing context, r8 and r10 have already
|
|
* been setup the way we want them. Indeed, if the signal wasn't delivered while
|
|
* in a system call, we must not touch r8 or r10 as otherwise user-level state
|
|
* could be corrupted.
|
|
*/
|
|
retval = (long) &ia64_leave_kernel;
|
|
if (test_thread_flag(TIF_SYSCALL_TRACE)
|
|
|| test_thread_flag(TIF_SYSCALL_AUDIT))
|
|
/*
|
|
* strace expects to be notified after sigreturn returns even though the
|
|
* context to which we return may not be in the middle of a syscall.
|
|
* Thus, the return-value that strace displays for sigreturn is
|
|
* meaningless.
|
|
*/
|
|
retval = (long) &ia64_strace_leave_kernel;
|
|
|
|
if (!access_ok(VERIFY_READ, sc, sizeof(*sc)))
|
|
goto give_sigsegv;
|
|
|
|
if (GET_SIGSET(&set, &sc->sc_mask))
|
|
goto give_sigsegv;
|
|
|
|
sigdelsetmask(&set, ~_BLOCKABLE);
|
|
|
|
spin_lock_irq(¤t->sighand->siglock);
|
|
{
|
|
current->blocked = set;
|
|
recalc_sigpending();
|
|
}
|
|
spin_unlock_irq(¤t->sighand->siglock);
|
|
|
|
if (restore_sigcontext(sc, scr))
|
|
goto give_sigsegv;
|
|
|
|
#if DEBUG_SIG
|
|
printk("SIG return (%s:%d): sp=%lx ip=%lx\n",
|
|
current->comm, current->pid, scr->pt.r12, scr->pt.cr_iip);
|
|
#endif
|
|
/*
|
|
* It is more difficult to avoid calling this function than to
|
|
* call it and ignore errors.
|
|
*/
|
|
do_sigaltstack(&sc->sc_stack, NULL, scr->pt.r12);
|
|
return retval;
|
|
|
|
give_sigsegv:
|
|
si.si_signo = SIGSEGV;
|
|
si.si_errno = 0;
|
|
si.si_code = SI_KERNEL;
|
|
si.si_pid = task_pid_vnr(current);
|
|
si.si_uid = current->uid;
|
|
si.si_addr = sc;
|
|
force_sig_info(SIGSEGV, &si, current);
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* This does just the minimum required setup of sigcontext.
|
|
* Specifically, it only installs data that is either not knowable at
|
|
* the user-level or that gets modified before execution in the
|
|
* trampoline starts. Everything else is done at the user-level.
|
|
*/
|
|
static long
|
|
setup_sigcontext (struct sigcontext __user *sc, sigset_t *mask, struct sigscratch *scr)
|
|
{
|
|
unsigned long flags = 0, ifs, cfm, nat;
|
|
long err;
|
|
|
|
ifs = scr->pt.cr_ifs;
|
|
|
|
if (on_sig_stack((unsigned long) sc))
|
|
flags |= IA64_SC_FLAG_ONSTACK;
|
|
if ((ifs & (1UL << 63)) == 0)
|
|
/* if cr_ifs doesn't have the valid bit set, we got here through a syscall */
|
|
flags |= IA64_SC_FLAG_IN_SYSCALL;
|
|
cfm = ifs & ((1UL << 38) - 1);
|
|
ia64_flush_fph(current);
|
|
if ((current->thread.flags & IA64_THREAD_FPH_VALID)) {
|
|
flags |= IA64_SC_FLAG_FPH_VALID;
|
|
__copy_to_user(&sc->sc_fr[32], current->thread.fph, 96*16);
|
|
}
|
|
|
|
nat = ia64_get_scratch_nat_bits(&scr->pt, scr->scratch_unat);
|
|
|
|
err = __put_user(flags, &sc->sc_flags);
|
|
err |= __put_user(nat, &sc->sc_nat);
|
|
err |= PUT_SIGSET(mask, &sc->sc_mask);
|
|
err |= __put_user(cfm, &sc->sc_cfm);
|
|
err |= __put_user(scr->pt.cr_ipsr & IA64_PSR_UM, &sc->sc_um);
|
|
err |= __put_user(scr->pt.ar_rsc, &sc->sc_ar_rsc);
|
|
err |= __put_user(scr->pt.ar_unat, &sc->sc_ar_unat); /* ar.unat */
|
|
err |= __put_user(scr->pt.ar_fpsr, &sc->sc_ar_fpsr); /* ar.fpsr */
|
|
err |= __put_user(scr->pt.ar_pfs, &sc->sc_ar_pfs);
|
|
err |= __put_user(scr->pt.pr, &sc->sc_pr); /* predicates */
|
|
err |= __put_user(scr->pt.b0, &sc->sc_br[0]); /* b0 (rp) */
|
|
err |= __put_user(scr->pt.b6, &sc->sc_br[6]); /* b6 */
|
|
err |= __copy_to_user(&sc->sc_gr[1], &scr->pt.r1, 8); /* r1 */
|
|
err |= __copy_to_user(&sc->sc_gr[8], &scr->pt.r8, 4*8); /* r8-r11 */
|
|
err |= __copy_to_user(&sc->sc_gr[12], &scr->pt.r12, 2*8); /* r12-r13 */
|
|
err |= __copy_to_user(&sc->sc_gr[15], &scr->pt.r15, 8); /* r15 */
|
|
err |= __put_user(scr->pt.cr_iip + ia64_psr(&scr->pt)->ri, &sc->sc_ip);
|
|
|
|
if (flags & IA64_SC_FLAG_IN_SYSCALL) {
|
|
/* Clear scratch registers if the signal interrupted a system call. */
|
|
err |= __put_user(0, &sc->sc_ar_ccv); /* ar.ccv */
|
|
err |= __put_user(0, &sc->sc_br[7]); /* b7 */
|
|
err |= __put_user(0, &sc->sc_gr[14]); /* r14 */
|
|
err |= __clear_user(&sc->sc_ar25, 2*8); /* ar.csd & ar.ssd */
|
|
err |= __clear_user(&sc->sc_gr[2], 2*8); /* r2-r3 */
|
|
err |= __clear_user(&sc->sc_gr[16], 16*8); /* r16-r31 */
|
|
} else {
|
|
/* Copy scratch regs to sigcontext if the signal didn't interrupt a syscall. */
|
|
err |= __put_user(scr->pt.ar_ccv, &sc->sc_ar_ccv); /* ar.ccv */
|
|
err |= __put_user(scr->pt.b7, &sc->sc_br[7]); /* b7 */
|
|
err |= __put_user(scr->pt.r14, &sc->sc_gr[14]); /* r14 */
|
|
err |= __copy_to_user(&sc->sc_ar25, &scr->pt.ar_csd, 2*8); /* ar.csd & ar.ssd */
|
|
err |= __copy_to_user(&sc->sc_gr[2], &scr->pt.r2, 2*8); /* r2-r3 */
|
|
err |= __copy_to_user(&sc->sc_gr[16], &scr->pt.r16, 16*8); /* r16-r31 */
|
|
}
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* Check whether the register-backing store is already on the signal stack.
|
|
*/
|
|
static inline int
|
|
rbs_on_sig_stack (unsigned long bsp)
|
|
{
|
|
return (bsp - current->sas_ss_sp < current->sas_ss_size);
|
|
}
|
|
|
|
static long
|
|
force_sigsegv_info (int sig, void __user *addr)
|
|
{
|
|
unsigned long flags;
|
|
struct siginfo si;
|
|
|
|
if (sig == SIGSEGV) {
|
|
/*
|
|
* Acquiring siglock around the sa_handler-update is almost
|
|
* certainly overkill, but this isn't a
|
|
* performance-critical path and I'd rather play it safe
|
|
* here than having to debug a nasty race if and when
|
|
* something changes in kernel/signal.c that would make it
|
|
* no longer safe to modify sa_handler without holding the
|
|
* lock.
|
|
*/
|
|
spin_lock_irqsave(¤t->sighand->siglock, flags);
|
|
current->sighand->action[sig - 1].sa.sa_handler = SIG_DFL;
|
|
spin_unlock_irqrestore(¤t->sighand->siglock, flags);
|
|
}
|
|
si.si_signo = SIGSEGV;
|
|
si.si_errno = 0;
|
|
si.si_code = SI_KERNEL;
|
|
si.si_pid = task_pid_vnr(current);
|
|
si.si_uid = current->uid;
|
|
si.si_addr = addr;
|
|
force_sig_info(SIGSEGV, &si, current);
|
|
return 0;
|
|
}
|
|
|
|
static long
|
|
setup_frame (int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set,
|
|
struct sigscratch *scr)
|
|
{
|
|
extern char __kernel_sigtramp[];
|
|
unsigned long tramp_addr, new_rbs = 0, new_sp;
|
|
struct sigframe __user *frame;
|
|
long err;
|
|
|
|
new_sp = scr->pt.r12;
|
|
tramp_addr = (unsigned long) __kernel_sigtramp;
|
|
if ((ka->sa.sa_flags & SA_ONSTACK) && sas_ss_flags(new_sp) == 0) {
|
|
new_sp = current->sas_ss_sp + current->sas_ss_size;
|
|
/*
|
|
* We need to check for the register stack being on the signal stack
|
|
* separately, because it's switched separately (memory stack is switched
|
|
* in the kernel, register stack is switched in the signal trampoline).
|
|
*/
|
|
if (!rbs_on_sig_stack(scr->pt.ar_bspstore))
|
|
new_rbs = (current->sas_ss_sp + sizeof(long) - 1) & ~(sizeof(long) - 1);
|
|
}
|
|
frame = (void __user *) ((new_sp - sizeof(*frame)) & -STACK_ALIGN);
|
|
|
|
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
|
|
return force_sigsegv_info(sig, frame);
|
|
|
|
err = __put_user(sig, &frame->arg0);
|
|
err |= __put_user(&frame->info, &frame->arg1);
|
|
err |= __put_user(&frame->sc, &frame->arg2);
|
|
err |= __put_user(new_rbs, &frame->sc.sc_rbs_base);
|
|
err |= __put_user(0, &frame->sc.sc_loadrs); /* initialize to zero */
|
|
err |= __put_user(ka->sa.sa_handler, &frame->handler);
|
|
|
|
err |= copy_siginfo_to_user(&frame->info, info);
|
|
|
|
err |= __put_user(current->sas_ss_sp, &frame->sc.sc_stack.ss_sp);
|
|
err |= __put_user(current->sas_ss_size, &frame->sc.sc_stack.ss_size);
|
|
err |= __put_user(sas_ss_flags(scr->pt.r12), &frame->sc.sc_stack.ss_flags);
|
|
err |= setup_sigcontext(&frame->sc, set, scr);
|
|
|
|
if (unlikely(err))
|
|
return force_sigsegv_info(sig, frame);
|
|
|
|
scr->pt.r12 = (unsigned long) frame - 16; /* new stack pointer */
|
|
scr->pt.ar_fpsr = FPSR_DEFAULT; /* reset fpsr for signal handler */
|
|
scr->pt.cr_iip = tramp_addr;
|
|
ia64_psr(&scr->pt)->ri = 0; /* start executing in first slot */
|
|
ia64_psr(&scr->pt)->be = 0; /* force little-endian byte-order */
|
|
/*
|
|
* Force the interruption function mask to zero. This has no effect when a
|
|
* system-call got interrupted by a signal (since, in that case, scr->pt_cr_ifs is
|
|
* ignored), but it has the desirable effect of making it possible to deliver a
|
|
* signal with an incomplete register frame (which happens when a mandatory RSE
|
|
* load faults). Furthermore, it has no negative effect on the getting the user's
|
|
* dirty partition preserved, because that's governed by scr->pt.loadrs.
|
|
*/
|
|
scr->pt.cr_ifs = (1UL << 63);
|
|
|
|
/*
|
|
* Note: this affects only the NaT bits of the scratch regs (the ones saved in
|
|
* pt_regs), which is exactly what we want.
|
|
*/
|
|
scr->scratch_unat = 0; /* ensure NaT bits of r12 is clear */
|
|
|
|
#if DEBUG_SIG
|
|
printk("SIG deliver (%s:%d): sig=%d sp=%lx ip=%lx handler=%p\n",
|
|
current->comm, current->pid, sig, scr->pt.r12, frame->sc.sc_ip, frame->handler);
|
|
#endif
|
|
return 1;
|
|
}
|
|
|
|
static long
|
|
handle_signal (unsigned long sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *oldset,
|
|
struct sigscratch *scr)
|
|
{
|
|
if (IS_IA32_PROCESS(&scr->pt)) {
|
|
/* send signal to IA-32 process */
|
|
if (!ia32_setup_frame1(sig, ka, info, oldset, &scr->pt))
|
|
return 0;
|
|
} else
|
|
/* send signal to IA-64 process */
|
|
if (!setup_frame(sig, ka, info, oldset, scr))
|
|
return 0;
|
|
|
|
spin_lock_irq(¤t->sighand->siglock);
|
|
sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask);
|
|
if (!(ka->sa.sa_flags & SA_NODEFER))
|
|
sigaddset(¤t->blocked, sig);
|
|
recalc_sigpending();
|
|
spin_unlock_irq(¤t->sighand->siglock);
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Note that `init' is a special process: it doesn't get signals it doesn't want to
|
|
* handle. Thus you cannot kill init even with a SIGKILL even by mistake.
|
|
*/
|
|
void
|
|
ia64_do_signal (struct sigscratch *scr, long in_syscall)
|
|
{
|
|
struct k_sigaction ka;
|
|
sigset_t *oldset;
|
|
siginfo_t info;
|
|
long restart = in_syscall;
|
|
long errno = scr->pt.r8;
|
|
# define ERR_CODE(c) (IS_IA32_PROCESS(&scr->pt) ? -(c) : (c))
|
|
|
|
/*
|
|
* In the ia64_leave_kernel code path, we want the common case to go fast, which
|
|
* is why we may in certain cases get here from kernel mode. Just return without
|
|
* doing anything if so.
|
|
*/
|
|
if (!user_mode(&scr->pt))
|
|
return;
|
|
|
|
if (test_thread_flag(TIF_RESTORE_SIGMASK))
|
|
oldset = ¤t->saved_sigmask;
|
|
else
|
|
oldset = ¤t->blocked;
|
|
|
|
/*
|
|
* This only loops in the rare cases of handle_signal() failing, in which case we
|
|
* need to push through a forced SIGSEGV.
|
|
*/
|
|
while (1) {
|
|
int signr = get_signal_to_deliver(&info, &ka, &scr->pt, NULL);
|
|
|
|
/*
|
|
* get_signal_to_deliver() may have run a debugger (via notify_parent())
|
|
* and the debugger may have modified the state (e.g., to arrange for an
|
|
* inferior call), thus it's important to check for restarting _after_
|
|
* get_signal_to_deliver().
|
|
*/
|
|
if (IS_IA32_PROCESS(&scr->pt)) {
|
|
if (in_syscall) {
|
|
if (errno >= 0)
|
|
restart = 0;
|
|
else
|
|
errno = -errno;
|
|
}
|
|
} else if ((long) scr->pt.r10 != -1)
|
|
/*
|
|
* A system calls has to be restarted only if one of the error codes
|
|
* ERESTARTNOHAND, ERESTARTSYS, or ERESTARTNOINTR is returned. If r10
|
|
* isn't -1 then r8 doesn't hold an error code and we don't need to
|
|
* restart the syscall, so we can clear the "restart" flag here.
|
|
*/
|
|
restart = 0;
|
|
|
|
if (signr <= 0)
|
|
break;
|
|
|
|
if (unlikely(restart)) {
|
|
switch (errno) {
|
|
case ERESTART_RESTARTBLOCK:
|
|
case ERESTARTNOHAND:
|
|
scr->pt.r8 = ERR_CODE(EINTR);
|
|
/* note: scr->pt.r10 is already -1 */
|
|
break;
|
|
|
|
case ERESTARTSYS:
|
|
if ((ka.sa.sa_flags & SA_RESTART) == 0) {
|
|
scr->pt.r8 = ERR_CODE(EINTR);
|
|
/* note: scr->pt.r10 is already -1 */
|
|
break;
|
|
}
|
|
case ERESTARTNOINTR:
|
|
if (IS_IA32_PROCESS(&scr->pt)) {
|
|
scr->pt.r8 = scr->pt.r1;
|
|
scr->pt.cr_iip -= 2;
|
|
} else
|
|
ia64_decrement_ip(&scr->pt);
|
|
restart = 0; /* don't restart twice if handle_signal() fails... */
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Whee! Actually deliver the signal. If the delivery failed, we need to
|
|
* continue to iterate in this loop so we can deliver the SIGSEGV...
|
|
*/
|
|
if (handle_signal(signr, &ka, &info, oldset, scr)) {
|
|
/* a signal was successfully delivered; the saved
|
|
* sigmask will have been stored in the signal frame,
|
|
* and will be restored by sigreturn, so we can simply
|
|
* clear the TIF_RESTORE_SIGMASK flag */
|
|
if (test_thread_flag(TIF_RESTORE_SIGMASK))
|
|
clear_thread_flag(TIF_RESTORE_SIGMASK);
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Did we come from a system call? */
|
|
if (restart) {
|
|
/* Restart the system call - no handlers present */
|
|
if (errno == ERESTARTNOHAND || errno == ERESTARTSYS || errno == ERESTARTNOINTR
|
|
|| errno == ERESTART_RESTARTBLOCK)
|
|
{
|
|
if (IS_IA32_PROCESS(&scr->pt)) {
|
|
scr->pt.r8 = scr->pt.r1;
|
|
scr->pt.cr_iip -= 2;
|
|
if (errno == ERESTART_RESTARTBLOCK)
|
|
scr->pt.r8 = 0; /* x86 version of __NR_restart_syscall */
|
|
} else {
|
|
/*
|
|
* Note: the syscall number is in r15 which is saved in
|
|
* pt_regs so all we need to do here is adjust ip so that
|
|
* the "break" instruction gets re-executed.
|
|
*/
|
|
ia64_decrement_ip(&scr->pt);
|
|
if (errno == ERESTART_RESTARTBLOCK)
|
|
scr->pt.r15 = __NR_restart_syscall;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* if there's no signal to deliver, we just put the saved sigmask
|
|
* back */
|
|
if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
|
|
clear_thread_flag(TIF_RESTORE_SIGMASK);
|
|
sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
|
|
}
|
|
}
|