1007 lines
30 KiB
C
1007 lines
30 KiB
C
#include "headers.h"
|
|
|
|
#define STATUS_IMAGE_CHECKSUM_MISMATCH -199
|
|
#define EVENT_SIGNALED 1
|
|
|
|
static B_UINT16 CFG_CalculateChecksum(B_UINT8 *pu8Buffer, B_UINT32 u32Size)
|
|
{
|
|
B_UINT16 u16CheckSum=0;
|
|
while(u32Size--) {
|
|
u16CheckSum += (B_UINT8)~(*pu8Buffer);
|
|
pu8Buffer++;
|
|
}
|
|
return u16CheckSum;
|
|
}
|
|
BOOLEAN IsReqGpioIsLedInNVM(PMINI_ADAPTER Adapter, UINT gpios)
|
|
{
|
|
INT Status ;
|
|
Status = (Adapter->gpioBitMap & gpios) ^ gpios ;
|
|
if(Status)
|
|
return FALSE;
|
|
else
|
|
return TRUE;
|
|
}
|
|
|
|
static INT LED_Blink(PMINI_ADAPTER Adapter, UINT GPIO_Num, UCHAR uiLedIndex, ULONG timeout, INT num_of_time, LedEventInfo_t currdriverstate)
|
|
{
|
|
int Status = STATUS_SUCCESS;
|
|
BOOLEAN bInfinite = FALSE;
|
|
|
|
/*Check if num_of_time is -ve. If yes, blink led in infinite loop*/
|
|
if(num_of_time < 0)
|
|
{
|
|
bInfinite = TRUE;
|
|
num_of_time = 1;
|
|
}
|
|
while(num_of_time)
|
|
{
|
|
|
|
if(currdriverstate == Adapter->DriverState)
|
|
TURN_ON_LED(GPIO_Num, uiLedIndex);
|
|
|
|
/*Wait for timeout after setting on the LED*/
|
|
Status = wait_event_interruptible_timeout(Adapter->LEDInfo.notify_led_event,
|
|
currdriverstate != Adapter->DriverState || kthread_should_stop(),
|
|
msecs_to_jiffies(timeout));
|
|
|
|
if(kthread_should_stop())
|
|
{
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting");
|
|
Adapter->LEDInfo.led_thread_running= BCM_LED_THREAD_DISABLED;
|
|
TURN_OFF_LED(GPIO_Num, uiLedIndex);
|
|
Status=EVENT_SIGNALED;
|
|
break;
|
|
}
|
|
if(Status)
|
|
{
|
|
TURN_OFF_LED(GPIO_Num, uiLedIndex);
|
|
Status=EVENT_SIGNALED;
|
|
break;
|
|
}
|
|
|
|
TURN_OFF_LED(GPIO_Num, uiLedIndex);
|
|
Status = wait_event_interruptible_timeout(Adapter->LEDInfo.notify_led_event,
|
|
currdriverstate!= Adapter->DriverState || kthread_should_stop(),
|
|
msecs_to_jiffies(timeout));
|
|
if(bInfinite == FALSE)
|
|
num_of_time--;
|
|
}
|
|
return Status;
|
|
}
|
|
|
|
static INT ScaleRateofTransfer(ULONG rate)
|
|
{
|
|
if(rate <= 3)
|
|
return rate;
|
|
else if((rate > 3) && (rate <= 100))
|
|
return 5;
|
|
else if((rate > 100) && (rate <= 200))
|
|
return 6;
|
|
else if((rate > 200) && (rate <= 300))
|
|
return 7;
|
|
else if((rate > 300) && (rate <= 400))
|
|
return 8;
|
|
else if((rate > 400) && (rate <= 500))
|
|
return 9;
|
|
else if((rate > 500) && (rate <= 600))
|
|
return 10;
|
|
else
|
|
return MAX_NUM_OF_BLINKS;
|
|
}
|
|
|
|
|
|
|
|
static INT LED_Proportional_Blink(PMINI_ADAPTER Adapter, UCHAR GPIO_Num_tx,
|
|
UCHAR uiTxLedIndex, UCHAR GPIO_Num_rx, UCHAR uiRxLedIndex, LedEventInfo_t currdriverstate)
|
|
{
|
|
/* Initial values of TX and RX packets*/
|
|
ULONG64 Initial_num_of_packts_tx = 0, Initial_num_of_packts_rx = 0;
|
|
/*values of TX and RX packets after 1 sec*/
|
|
ULONG64 Final_num_of_packts_tx = 0, Final_num_of_packts_rx = 0;
|
|
/*Rate of transfer of Tx and Rx in 1 sec*/
|
|
ULONG64 rate_of_transfer_tx = 0, rate_of_transfer_rx = 0;
|
|
int Status = STATUS_SUCCESS;
|
|
INT num_of_time = 0, num_of_time_tx = 0, num_of_time_rx = 0;
|
|
UINT remDelay = 0;
|
|
BOOLEAN bBlinkBothLED = TRUE;
|
|
//UINT GPIO_num = DISABLE_GPIO_NUM;
|
|
ulong timeout = 0;
|
|
|
|
/*Read initial value of packets sent/received */
|
|
Initial_num_of_packts_tx = atomic_read(&Adapter->TxTotalPacketCount);
|
|
Initial_num_of_packts_rx = atomic_read(&Adapter->GoodRxPktCount);
|
|
/*Scale the rate of transfer to no of blinks.*/
|
|
num_of_time_tx= ScaleRateofTransfer((ULONG)rate_of_transfer_tx);
|
|
num_of_time_rx= ScaleRateofTransfer((ULONG)rate_of_transfer_rx);
|
|
|
|
while((Adapter->device_removed == FALSE))
|
|
{
|
|
#if 0
|
|
if(0 == num_of_time_tx && 0 == num_of_time_rx)
|
|
{
|
|
timeout = 1000;
|
|
Status = wait_event_interruptible_timeout(Adapter->LEDInfo.notify_led_event,
|
|
currdriverstate!= Adapter->DriverState || kthread_should_stop(),
|
|
msecs_to_jiffies (timeout));
|
|
if(kthread_should_stop())
|
|
{
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting");
|
|
Adapter->LEDInfo.led_thread_running= BCM_LED_THREAD_DISABLED;
|
|
return EVENT_SIGNALED;
|
|
}
|
|
if(Status)
|
|
return EVENT_SIGNALED;
|
|
|
|
}
|
|
#endif
|
|
|
|
timeout = 50;
|
|
#if 0
|
|
/*Turn on LED if Tx is high bandwidth*/
|
|
if(num_of_time_tx > MAX_NUM_OF_BLINKS)
|
|
{
|
|
TURN_ON_LED(1<<GPIO_Num_tx, uiTxLedIndex);
|
|
num_of_time_tx = 0;
|
|
bBlinkBothLED = FALSE;
|
|
num_of_time = num_of_time_rx;
|
|
}
|
|
/*Turn on LED if Rx is high bandwidth*/
|
|
if(num_of_time_rx > MAX_NUM_OF_BLINKS)
|
|
{
|
|
TURN_ON_LED(1<<GPIO_Num_rx, uiRxLedIndex);
|
|
num_of_time_rx = 0;
|
|
bBlinkBothLED = FALSE;
|
|
num_of_time = num_of_time_tx;
|
|
}
|
|
#endif
|
|
/*Blink Tx and Rx LED when both Tx and Rx is in normal bandwidth*/
|
|
if(bBlinkBothLED)
|
|
{
|
|
/*Assign minimum number of blinks of either Tx or Rx.*/
|
|
if(num_of_time_tx > num_of_time_rx)
|
|
num_of_time = num_of_time_rx;
|
|
else
|
|
num_of_time = num_of_time_tx;
|
|
if(num_of_time > 0)
|
|
{
|
|
/*Blink both Tx and Rx LEDs*/
|
|
if(LED_Blink(Adapter, 1<<GPIO_Num_tx, uiTxLedIndex, timeout, num_of_time,currdriverstate)
|
|
== EVENT_SIGNALED)
|
|
{
|
|
return EVENT_SIGNALED;
|
|
}
|
|
if(LED_Blink(Adapter, 1<<GPIO_Num_rx, uiRxLedIndex, timeout, num_of_time,currdriverstate)
|
|
== EVENT_SIGNALED)
|
|
{
|
|
return EVENT_SIGNALED;
|
|
}
|
|
|
|
}
|
|
|
|
if(num_of_time == num_of_time_tx)
|
|
{
|
|
/*Blink pending rate of Rx*/
|
|
if(LED_Blink(Adapter, (1 << GPIO_Num_rx), uiRxLedIndex, timeout,
|
|
num_of_time_rx-num_of_time,currdriverstate) == EVENT_SIGNALED)
|
|
{
|
|
return EVENT_SIGNALED;
|
|
}
|
|
num_of_time = num_of_time_rx;
|
|
}
|
|
else
|
|
{
|
|
/*Blink pending rate of Tx*/
|
|
if(LED_Blink(Adapter, 1<<GPIO_Num_tx, uiTxLedIndex, timeout,
|
|
num_of_time_tx-num_of_time,currdriverstate) == EVENT_SIGNALED)
|
|
{
|
|
return EVENT_SIGNALED;
|
|
}
|
|
num_of_time = num_of_time_tx;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if(num_of_time == num_of_time_tx)
|
|
{
|
|
/*Blink pending rate of Rx*/
|
|
if(LED_Blink(Adapter, 1<<GPIO_Num_tx, uiTxLedIndex, timeout, num_of_time,currdriverstate)
|
|
== EVENT_SIGNALED)
|
|
{
|
|
return EVENT_SIGNALED;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/*Blink pending rate of Tx*/
|
|
if(LED_Blink(Adapter, 1<<GPIO_Num_rx, uiRxLedIndex, timeout,
|
|
num_of_time,currdriverstate) == EVENT_SIGNALED)
|
|
{
|
|
return EVENT_SIGNALED;
|
|
}
|
|
}
|
|
}
|
|
/* If Tx/Rx rate is less than maximum blinks per second,
|
|
* wait till delay completes to 1 second
|
|
*/
|
|
remDelay = MAX_NUM_OF_BLINKS - num_of_time;
|
|
if(remDelay > 0)
|
|
{
|
|
timeout= 100 * remDelay;
|
|
Status = wait_event_interruptible_timeout(Adapter->LEDInfo.notify_led_event,
|
|
currdriverstate!= Adapter->DriverState ||kthread_should_stop() ,
|
|
msecs_to_jiffies (timeout));
|
|
|
|
if(kthread_should_stop())
|
|
{
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting");
|
|
Adapter->LEDInfo.led_thread_running= BCM_LED_THREAD_DISABLED;
|
|
return EVENT_SIGNALED;
|
|
}
|
|
if(Status)
|
|
return EVENT_SIGNALED;
|
|
}
|
|
|
|
/*Turn off both Tx and Rx LEDs before next second*/
|
|
TURN_OFF_LED(1<<GPIO_Num_tx, uiTxLedIndex);
|
|
TURN_OFF_LED(1<<GPIO_Num_rx, uiTxLedIndex);
|
|
|
|
/*
|
|
* Read the Tx & Rx packets transmission after 1 second and
|
|
* calculate rate of transfer
|
|
*/
|
|
Final_num_of_packts_tx = atomic_read(&Adapter->TxTotalPacketCount);
|
|
rate_of_transfer_tx = Final_num_of_packts_tx - Initial_num_of_packts_tx;
|
|
Final_num_of_packts_rx = atomic_read(&Adapter->GoodRxPktCount);
|
|
rate_of_transfer_rx = Final_num_of_packts_rx - Initial_num_of_packts_rx;
|
|
|
|
/*Read initial value of packets sent/received */
|
|
Initial_num_of_packts_tx = Final_num_of_packts_tx;
|
|
Initial_num_of_packts_rx = Final_num_of_packts_rx ;
|
|
|
|
/*Scale the rate of transfer to no of blinks.*/
|
|
num_of_time_tx= ScaleRateofTransfer((ULONG)rate_of_transfer_tx);
|
|
num_of_time_rx= ScaleRateofTransfer((ULONG)rate_of_transfer_rx);
|
|
|
|
}
|
|
return Status;
|
|
}
|
|
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Procedure: ValidateDSDParamsChecksum
|
|
//
|
|
// Description: Reads DSD Params and validates checkusm.
|
|
//
|
|
// Arguments:
|
|
// Adapter - Pointer to Adapter structure.
|
|
// ulParamOffset - Start offset of the DSD parameter to be read and validated.
|
|
// usParamLen - Length of the DSD Parameter.
|
|
//
|
|
// Returns:
|
|
// <OSAL_STATUS_CODE>
|
|
//-----------------------------------------------------------------------------
|
|
|
|
static INT ValidateDSDParamsChecksum(
|
|
PMINI_ADAPTER Adapter,
|
|
ULONG ulParamOffset,
|
|
USHORT usParamLen )
|
|
{
|
|
INT Status = STATUS_SUCCESS;
|
|
PUCHAR puBuffer = NULL;
|
|
USHORT usChksmOrg = 0;
|
|
USHORT usChecksumCalculated = 0;
|
|
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread:ValidateDSDParamsChecksum: 0x%lx 0x%X",ulParamOffset, usParamLen);
|
|
|
|
puBuffer = OsalMemAlloc(usParamLen,"!MEM");
|
|
if(!puBuffer)
|
|
{
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: ValidateDSDParamsChecksum Allocation failed");
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
//
|
|
// Read the DSD data from the parameter offset.
|
|
//
|
|
if(STATUS_SUCCESS != BeceemNVMRead(Adapter,(PUINT)puBuffer,ulParamOffset,usParamLen))
|
|
{
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: ValidateDSDParamsChecksum BeceemNVMRead failed");
|
|
Status=STATUS_IMAGE_CHECKSUM_MISMATCH;
|
|
goto exit;
|
|
}
|
|
|
|
//
|
|
// Calculate the checksum of the data read from the DSD parameter.
|
|
//
|
|
usChecksumCalculated = CFG_CalculateChecksum(puBuffer,usParamLen);
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: usCheckSumCalculated = 0x%x\n", usChecksumCalculated);
|
|
|
|
//
|
|
// End of the DSD parameter will have a TWO bytes checksum stored in it. Read it and compare with the calculated
|
|
// Checksum.
|
|
//
|
|
if(STATUS_SUCCESS != BeceemNVMRead(Adapter,(PUINT)&usChksmOrg,ulParamOffset+usParamLen,2))
|
|
{
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: ValidateDSDParamsChecksum BeceemNVMRead failed");
|
|
Status=STATUS_IMAGE_CHECKSUM_MISMATCH;
|
|
goto exit;
|
|
}
|
|
usChksmOrg = ntohs(usChksmOrg);
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: usChksmOrg = 0x%x", usChksmOrg);
|
|
|
|
//
|
|
// Compare the checksum calculated with the checksum read from DSD section
|
|
//
|
|
if(usChecksumCalculated ^ usChksmOrg)
|
|
{
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: ValidateDSDParamsChecksum: Checksums don't match");
|
|
Status = STATUS_IMAGE_CHECKSUM_MISMATCH;
|
|
goto exit;
|
|
}
|
|
|
|
exit:
|
|
if(puBuffer)
|
|
{
|
|
OsalMemFree(puBuffer, usParamLen);
|
|
}
|
|
return Status;
|
|
}
|
|
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Procedure: ValidateHWParmStructure
|
|
//
|
|
// Description: Validates HW Parameters.
|
|
//
|
|
// Arguments:
|
|
// Adapter - Pointer to Adapter structure.
|
|
// ulHwParamOffset - Start offset of the HW parameter Section to be read and validated.
|
|
//
|
|
// Returns:
|
|
// <OSAL_STATUS_CODE>
|
|
//-----------------------------------------------------------------------------
|
|
|
|
static INT ValidateHWParmStructure(PMINI_ADAPTER Adapter, ULONG ulHwParamOffset)
|
|
{
|
|
|
|
INT Status = STATUS_SUCCESS ;
|
|
USHORT HwParamLen = 0;
|
|
// Add DSD start offset to the hwParamOffset to get the actual address.
|
|
ulHwParamOffset += DSD_START_OFFSET;
|
|
|
|
/*Read the Length of HW_PARAM structure*/
|
|
BeceemNVMRead(Adapter,(PUINT)&HwParamLen,ulHwParamOffset,2);
|
|
HwParamLen = ntohs(HwParamLen);
|
|
if(0==HwParamLen || HwParamLen > Adapter->uiNVMDSDSize)
|
|
{
|
|
return STATUS_IMAGE_CHECKSUM_MISMATCH;
|
|
}
|
|
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread:HwParamLen = 0x%x", HwParamLen);
|
|
Status =ValidateDSDParamsChecksum(Adapter,ulHwParamOffset,HwParamLen);
|
|
return Status;
|
|
} /* ValidateHWParmStructure() */
|
|
|
|
static int ReadLEDInformationFromEEPROM(PMINI_ADAPTER Adapter, UCHAR GPIO_Array[])
|
|
{
|
|
int Status = STATUS_SUCCESS;
|
|
|
|
ULONG dwReadValue = 0;
|
|
USHORT usHwParamData = 0;
|
|
USHORT usEEPROMVersion = 0;
|
|
UCHAR ucIndex = 0;
|
|
UCHAR ucGPIOInfo[32] = {0};
|
|
|
|
BeceemNVMRead(Adapter,(PUINT)&usEEPROMVersion,EEPROM_VERSION_OFFSET,2);
|
|
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"usEEPROMVersion: Minor:0x%X Major:0x%x",usEEPROMVersion&0xFF, ((usEEPROMVersion>>8)&0xFF));
|
|
|
|
|
|
if(((usEEPROMVersion>>8)&0xFF) < EEPROM_MAP5_MAJORVERSION)
|
|
{
|
|
BeceemNVMRead(Adapter,(PUINT)&usHwParamData,EEPROM_HW_PARAM_POINTER_ADDRESS,2);
|
|
usHwParamData = ntohs(usHwParamData);
|
|
dwReadValue = usHwParamData;
|
|
}
|
|
else
|
|
{
|
|
//
|
|
// Validate Compatibility section and then read HW param if compatibility section is valid.
|
|
//
|
|
Status = ValidateDSDParamsChecksum(Adapter,
|
|
DSD_START_OFFSET,
|
|
COMPATIBILITY_SECTION_LENGTH_MAP5);
|
|
|
|
if(Status != STATUS_SUCCESS)
|
|
{
|
|
return Status;
|
|
}
|
|
BeceemNVMRead(Adapter,(PUINT)&dwReadValue,EEPROM_HW_PARAM_POINTER_ADDRRES_MAP5,4);
|
|
dwReadValue = ntohl(dwReadValue);
|
|
}
|
|
|
|
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: Start address of HW_PARAM structure = 0x%lx",dwReadValue);
|
|
|
|
//
|
|
// Validate if the address read out is within the DSD.
|
|
// Adapter->uiNVMDSDSize gives whole DSD size inclusive of Autoinit.
|
|
// lower limit should be above DSD_START_OFFSET and
|
|
// upper limit should be below (Adapter->uiNVMDSDSize-DSD_START_OFFSET)
|
|
//
|
|
if(dwReadValue < DSD_START_OFFSET ||
|
|
dwReadValue > (Adapter->uiNVMDSDSize-DSD_START_OFFSET))
|
|
{
|
|
return STATUS_IMAGE_CHECKSUM_MISMATCH;
|
|
}
|
|
|
|
Status = ValidateHWParmStructure(Adapter, dwReadValue);
|
|
if(Status){
|
|
return Status;
|
|
}
|
|
|
|
/*
|
|
Add DSD_START_OFFSET to the offset read from the EEPROM.
|
|
This will give the actual start HW Parameters start address.
|
|
To read GPIO section, add GPIO offset further.
|
|
*/
|
|
|
|
dwReadValue += DSD_START_OFFSET; // = start address of hw param section.
|
|
dwReadValue += GPIO_SECTION_START_OFFSET; // = GPIO start offset within HW Param section.
|
|
|
|
/* Read the GPIO values for 32 GPIOs from EEPROM and map the function
|
|
* number to GPIO pin number to GPIO_Array
|
|
*/
|
|
BeceemNVMRead(Adapter, (UINT *)ucGPIOInfo,dwReadValue,32);
|
|
for(ucIndex = 0; ucIndex < 32; ucIndex++)
|
|
{
|
|
|
|
switch(ucGPIOInfo[ucIndex])
|
|
{
|
|
case RED_LED:
|
|
{
|
|
GPIO_Array[RED_LED] = ucIndex;
|
|
Adapter->gpioBitMap |= (1<<ucIndex);
|
|
break;
|
|
}
|
|
case BLUE_LED:
|
|
{
|
|
GPIO_Array[BLUE_LED] = ucIndex;
|
|
Adapter->gpioBitMap |= (1<<ucIndex);
|
|
break;
|
|
}
|
|
case YELLOW_LED:
|
|
{
|
|
GPIO_Array[YELLOW_LED] = ucIndex;
|
|
Adapter->gpioBitMap |= (1<<ucIndex);
|
|
break;
|
|
}
|
|
case GREEN_LED:
|
|
{
|
|
GPIO_Array[GREEN_LED] = ucIndex;
|
|
Adapter->gpioBitMap |= (1<<ucIndex);
|
|
break;
|
|
}
|
|
default:
|
|
break;
|
|
}
|
|
|
|
}
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"GPIO's bit map correspond to LED :0x%X",Adapter->gpioBitMap);
|
|
return Status;
|
|
}
|
|
|
|
|
|
static int ReadConfigFileStructure(PMINI_ADAPTER Adapter, BOOLEAN *bEnableThread)
|
|
{
|
|
int Status = STATUS_SUCCESS;
|
|
UCHAR GPIO_Array[NUM_OF_LEDS+1]; /*Array to store GPIO numbers from EEPROM*/
|
|
#ifndef BCM_SHM_INTERFACE
|
|
UINT uiIndex = 0;
|
|
UINT uiNum_of_LED_Type = 0;
|
|
PUCHAR puCFGData = NULL;
|
|
UCHAR bData = 0;
|
|
#endif
|
|
memset(GPIO_Array, DISABLE_GPIO_NUM, NUM_OF_LEDS+1);
|
|
|
|
if(!Adapter->pstargetparams || IS_ERR(Adapter->pstargetparams))
|
|
{
|
|
BCM_DEBUG_PRINT (Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Target Params not Avail.\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
/*Populate GPIO_Array with GPIO numbers for LED functions*/
|
|
/*Read the GPIO numbers from EEPROM*/
|
|
Status = ReadLEDInformationFromEEPROM(Adapter, GPIO_Array);
|
|
if(Status == STATUS_IMAGE_CHECKSUM_MISMATCH)
|
|
{
|
|
*bEnableThread = FALSE;
|
|
return STATUS_SUCCESS;
|
|
}
|
|
else if(Status)
|
|
{
|
|
*bEnableThread = FALSE;
|
|
return Status;
|
|
}
|
|
#ifdef BCM_SHM_INTERFACE
|
|
*bEnableThread = FALSE;
|
|
return Status ;
|
|
#else
|
|
/*
|
|
* CONFIG file read successfully. Deallocate the memory of
|
|
* uiFileNameBufferSize
|
|
*/
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: Config file read successfully\n");
|
|
puCFGData = (PUCHAR) &Adapter->pstargetparams->HostDrvrConfig1;
|
|
|
|
/*
|
|
* Offset for HostDrvConfig1, HostDrvConfig2, HostDrvConfig3 which
|
|
* will have the information of LED type, LED on state for different
|
|
* driver state and LED blink state.
|
|
*/
|
|
|
|
for(uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++)
|
|
{
|
|
bData = *puCFGData;
|
|
|
|
/*Check Bit 8 for polarity. If it is set, polarity is reverse polarity*/
|
|
if(bData & 0x80)
|
|
{
|
|
Adapter->LEDInfo.LEDState[uiIndex].BitPolarity = 0;
|
|
/*unset the bit 8*/
|
|
bData = bData & 0x7f;
|
|
}
|
|
|
|
Adapter->LEDInfo.LEDState[uiIndex].LED_Type = bData;
|
|
if(bData <= NUM_OF_LEDS)
|
|
Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num = GPIO_Array[bData];
|
|
else
|
|
Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num = DISABLE_GPIO_NUM;
|
|
|
|
puCFGData++;
|
|
bData = *puCFGData;
|
|
Adapter->LEDInfo.LEDState[uiIndex].LED_On_State = bData;
|
|
puCFGData++;
|
|
bData = *puCFGData;
|
|
Adapter->LEDInfo.LEDState[uiIndex].LED_Blink_State= bData;
|
|
puCFGData++;
|
|
}
|
|
|
|
/*Check if all the LED settings are disabled. If it is disabled, dont launch the LED control thread.*/
|
|
for(uiIndex = 0; uiIndex<NUM_OF_LEDS; uiIndex++)
|
|
{
|
|
if((Adapter->LEDInfo.LEDState[uiIndex].LED_Type == DISABLE_GPIO_NUM) ||
|
|
(Adapter->LEDInfo.LEDState[uiIndex].LED_Type == 0x7f) ||
|
|
(Adapter->LEDInfo.LEDState[uiIndex].LED_Type == 0))
|
|
uiNum_of_LED_Type++;
|
|
}
|
|
if(uiNum_of_LED_Type >= NUM_OF_LEDS)
|
|
*bEnableThread = FALSE;
|
|
#endif
|
|
|
|
#if 0
|
|
for(uiIndex=0; uiIndex<NUM_OF_LEDS; uiIndex++)
|
|
{
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LEDState[%d].LED_Type = %x\n", uiIndex,
|
|
Adapter->LEDInfo.LEDState[uiIndex].LED_Type);
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LEDState[%d].LED_On_State = %x\n", uiIndex,
|
|
Adapter->LEDInfo.LEDState[uiIndex].LED_On_State);
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LEDState[%d].LED_Blink_State = %x\n", uiIndex,
|
|
Adapter->LEDInfo.LEDState[uiIndex].LED_Blink_State);
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LEDState[%d].GPIO_Num = %x\n", uiIndex,
|
|
Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num);
|
|
}
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: Polarity = %d\n",
|
|
Adapter->LEDInfo.BitPolarty);
|
|
#endif
|
|
return Status;
|
|
}
|
|
//--------------------------------------------------------------------------
|
|
// Procedure: LedGpioInit
|
|
//
|
|
// Description: Initializes LED GPIOs. Makes the LED GPIOs to OUTPUT mode and make the
|
|
// initial state to be OFF.
|
|
//
|
|
// Arguments:
|
|
// Adapter - Pointer to MINI_ADAPTER structure.
|
|
//
|
|
// Returns: VOID
|
|
//
|
|
//-----------------------------------------------------------------------------
|
|
|
|
static VOID LedGpioInit(PMINI_ADAPTER Adapter)
|
|
{
|
|
UINT uiResetValue = 0;
|
|
UINT uiIndex = 0;
|
|
|
|
/* Set all LED GPIO Mode to output mode */
|
|
if(rdmalt(Adapter, GPIO_MODE_REGISTER, &uiResetValue, sizeof(uiResetValue)) <0)
|
|
BCM_DEBUG_PRINT (Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: RDM Failed\n");
|
|
for(uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++)
|
|
{
|
|
if(Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM)
|
|
uiResetValue |= (1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num);
|
|
TURN_OFF_LED(1<<Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num,uiIndex);
|
|
}
|
|
if(wrmalt(Adapter, GPIO_MODE_REGISTER, &uiResetValue, sizeof(uiResetValue)) < 0)
|
|
BCM_DEBUG_PRINT (Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: WRM Failed\n");
|
|
|
|
Adapter->LEDInfo.bIdle_led_off = FALSE;
|
|
}
|
|
//-----------------------------------------------------------------------------
|
|
|
|
static INT BcmGetGPIOPinInfo(PMINI_ADAPTER Adapter, UCHAR *GPIO_num_tx, UCHAR *GPIO_num_rx ,UCHAR *uiLedTxIndex, UCHAR *uiLedRxIndex,LedEventInfo_t currdriverstate)
|
|
{
|
|
UINT uiIndex = 0;
|
|
|
|
*GPIO_num_tx = DISABLE_GPIO_NUM;
|
|
*GPIO_num_rx = DISABLE_GPIO_NUM;
|
|
|
|
for(uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++)
|
|
{
|
|
|
|
if((currdriverstate == NORMAL_OPERATION)||
|
|
(currdriverstate == IDLEMODE_EXIT)||
|
|
(currdriverstate == FW_DOWNLOAD))
|
|
{
|
|
if(Adapter->LEDInfo.LEDState[uiIndex].LED_Blink_State & currdriverstate)
|
|
{
|
|
if(Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM)
|
|
{
|
|
if(*GPIO_num_tx == DISABLE_GPIO_NUM)
|
|
{
|
|
*GPIO_num_tx = Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num;
|
|
*uiLedTxIndex = uiIndex;
|
|
}
|
|
else
|
|
{
|
|
*GPIO_num_rx = Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num;
|
|
*uiLedRxIndex = uiIndex;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if(Adapter->LEDInfo.LEDState[uiIndex].LED_On_State & currdriverstate)
|
|
{
|
|
if(Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM)
|
|
{
|
|
*GPIO_num_tx = Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num;
|
|
*uiLedTxIndex = uiIndex;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return STATUS_SUCCESS ;
|
|
}
|
|
static VOID LEDControlThread(PMINI_ADAPTER Adapter)
|
|
{
|
|
UINT uiIndex = 0;
|
|
UCHAR GPIO_num = 0;
|
|
UCHAR uiLedIndex = 0 ;
|
|
UINT uiResetValue = 0;
|
|
LedEventInfo_t currdriverstate = 0;
|
|
ulong timeout = 0;
|
|
|
|
INT Status = 0;
|
|
|
|
UCHAR dummyGPIONum = 0;
|
|
UCHAR dummyIndex = 0;
|
|
|
|
//currdriverstate = Adapter->DriverState;
|
|
Adapter->LEDInfo.bIdleMode_tx_from_host = FALSE;
|
|
|
|
/*Wait till event is triggered*/
|
|
//wait_event(Adapter->LEDInfo.notify_led_event,
|
|
// currdriverstate!= Adapter->DriverState);
|
|
|
|
GPIO_num = DISABLE_GPIO_NUM ;
|
|
|
|
while(TRUE)
|
|
{
|
|
/*Wait till event is triggered*/
|
|
if( (GPIO_num == DISABLE_GPIO_NUM)
|
|
||
|
|
((currdriverstate != FW_DOWNLOAD) &&
|
|
(currdriverstate != NORMAL_OPERATION) &&
|
|
(currdriverstate != LOWPOWER_MODE_ENTER))
|
|
||
|
|
(currdriverstate == LED_THREAD_INACTIVE) )
|
|
{
|
|
Status = wait_event_interruptible(Adapter->LEDInfo.notify_led_event,
|
|
currdriverstate != Adapter->DriverState || kthread_should_stop());
|
|
}
|
|
|
|
if(kthread_should_stop() || Adapter->device_removed )
|
|
{
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting");
|
|
Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED;
|
|
TURN_OFF_LED(1<<GPIO_num, uiLedIndex);
|
|
return ;//STATUS_FAILURE;
|
|
}
|
|
#if 0
|
|
if(Adapter->device_removed)
|
|
{
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"Device removed hence exiting from Led Thread..");
|
|
return ; //-ENODEV;
|
|
}
|
|
#endif
|
|
#if 0
|
|
if((GPIO_num != DISABLE_GPIO_NUM) &&
|
|
((currdriverstate != FW_DOWNLOAD) &&
|
|
(currdriverstate != NORMAL_OPERATION) &&
|
|
(currdriverstate != IDLEMODE_EXIT)))
|
|
TURN_OFF_LED(1<<GPIO_num, uiLedIndex);
|
|
#endif
|
|
|
|
if(GPIO_num != DISABLE_GPIO_NUM)
|
|
{
|
|
TURN_OFF_LED(1<<GPIO_num, uiLedIndex);
|
|
}
|
|
|
|
if(Adapter->LEDInfo.bLedInitDone == FALSE)
|
|
{
|
|
LedGpioInit(Adapter);
|
|
Adapter->LEDInfo.bLedInitDone = TRUE;
|
|
}
|
|
|
|
switch(Adapter->DriverState)
|
|
{
|
|
case DRIVER_INIT:
|
|
{
|
|
currdriverstate = DRIVER_INIT;//Adapter->DriverState;
|
|
#if 0
|
|
LedGpioInit(Adapter);
|
|
Adapter->LEDInfo.bLedInitDone = TRUE;
|
|
#endif
|
|
BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyIndex, currdriverstate);
|
|
|
|
if(GPIO_num != DISABLE_GPIO_NUM)
|
|
{
|
|
TURN_ON_LED(1<<GPIO_num, uiLedIndex);
|
|
}
|
|
}
|
|
break;
|
|
case FW_DOWNLOAD:
|
|
{
|
|
//BCM_DEBUG_PRINT (Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: FW_DN_DONE called\n");
|
|
currdriverstate = FW_DOWNLOAD;
|
|
#if 0
|
|
if(Adapter->LEDInfo.bLedInitDone == FALSE)
|
|
{
|
|
LedGpioInit(Adapter);
|
|
Adapter->LEDInfo.bLedInitDone = TRUE;
|
|
}
|
|
#endif
|
|
BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyIndex, currdriverstate);
|
|
|
|
if(GPIO_num != DISABLE_GPIO_NUM)
|
|
{
|
|
timeout = 50;
|
|
LED_Blink(Adapter, 1<<GPIO_num, uiLedIndex, timeout, -1,currdriverstate);
|
|
}
|
|
}
|
|
break;
|
|
case FW_DOWNLOAD_DONE:
|
|
{
|
|
currdriverstate = FW_DOWNLOAD_DONE;
|
|
BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyIndex,currdriverstate);
|
|
if(GPIO_num != DISABLE_GPIO_NUM)
|
|
{
|
|
TURN_ON_LED(1<<GPIO_num, uiLedIndex);
|
|
}
|
|
}
|
|
break;
|
|
|
|
case SHUTDOWN_EXIT:
|
|
#if 0
|
|
if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_PMU_SHUTDOWN)
|
|
{
|
|
LedGpioInit(Adapter);
|
|
}
|
|
#endif
|
|
//no break, continue to NO_NETWORK_ENTRY state as well.
|
|
|
|
case NO_NETWORK_ENTRY:
|
|
{
|
|
currdriverstate = NO_NETWORK_ENTRY;
|
|
BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex,&dummyGPIONum,currdriverstate);
|
|
if(GPIO_num != DISABLE_GPIO_NUM)
|
|
{
|
|
TURN_ON_LED(1<<GPIO_num, uiLedIndex);
|
|
}
|
|
}
|
|
break;
|
|
case NORMAL_OPERATION:
|
|
{
|
|
UCHAR GPIO_num_tx = DISABLE_GPIO_NUM;
|
|
UCHAR GPIO_num_rx = DISABLE_GPIO_NUM;
|
|
UCHAR uiLEDTx = 0;
|
|
UCHAR uiLEDRx = 0;
|
|
currdriverstate = NORMAL_OPERATION;
|
|
Adapter->LEDInfo.bIdle_led_off = FALSE;
|
|
|
|
BcmGetGPIOPinInfo(Adapter, &GPIO_num_tx, &GPIO_num_rx, &uiLEDTx,&uiLEDRx,currdriverstate);
|
|
if((GPIO_num_tx == DISABLE_GPIO_NUM) && (GPIO_num_rx == DISABLE_GPIO_NUM))
|
|
{
|
|
GPIO_num = DISABLE_GPIO_NUM ;
|
|
}
|
|
else
|
|
{
|
|
/*If single LED is selected, use same for both Tx and Rx*/
|
|
if(GPIO_num_tx == DISABLE_GPIO_NUM)
|
|
{
|
|
GPIO_num_tx = GPIO_num_rx;
|
|
uiLEDTx = uiLEDRx;
|
|
}
|
|
else if(GPIO_num_rx == DISABLE_GPIO_NUM)
|
|
{
|
|
GPIO_num_rx = GPIO_num_tx;
|
|
uiLEDRx = uiLEDTx;
|
|
}
|
|
/*Blink the LED in proportionate to Tx and Rx transmissions.*/
|
|
LED_Proportional_Blink(Adapter, GPIO_num_tx, uiLEDTx, GPIO_num_rx, uiLEDRx,currdriverstate);
|
|
}
|
|
}
|
|
break;
|
|
case LOWPOWER_MODE_ENTER:
|
|
{
|
|
currdriverstate = LOWPOWER_MODE_ENTER;
|
|
if( DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING == Adapter->ulPowerSaveMode)
|
|
{
|
|
/* Turn OFF all the LED */
|
|
uiResetValue = 0;
|
|
for(uiIndex =0; uiIndex < NUM_OF_LEDS; uiIndex++)
|
|
{
|
|
if(Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM)
|
|
TURN_OFF_LED((1<<Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num),uiIndex);
|
|
}
|
|
|
|
}
|
|
/* Turn off LED And WAKE-UP for Sendinf IDLE mode ACK */
|
|
Adapter->LEDInfo.bLedInitDone = FALSE;
|
|
Adapter->LEDInfo.bIdle_led_off = TRUE;
|
|
wake_up(&Adapter->LEDInfo.idleModeSyncEvent);
|
|
GPIO_num = DISABLE_GPIO_NUM;
|
|
break;
|
|
}
|
|
case IDLEMODE_CONTINUE:
|
|
{
|
|
currdriverstate = IDLEMODE_CONTINUE;
|
|
GPIO_num = DISABLE_GPIO_NUM;
|
|
}
|
|
break;
|
|
case IDLEMODE_EXIT:
|
|
{
|
|
#if 0
|
|
UCHAR GPIO_num_tx = DISABLE_GPIO_NUM;
|
|
UCHAR GPIO_num_rx = DISABLE_GPIO_NUM;
|
|
UCHAR uiTxLedIndex = 0;
|
|
UCHAR uiRxLedIndex = 0;
|
|
|
|
currdriverstate = IDLEMODE_EXIT;
|
|
if(DEVICE_POWERSAVE_MODE_AS_PMU_SHUTDOWN == Adapter->ulPowerSaveMode)
|
|
{
|
|
LedGpioInit(Adapter);
|
|
}
|
|
BcmGetGPIOPinInfo(Adapter, &GPIO_num_tx, &GPIO_num_rx, &uiTxLedIndex,&uiRxLedIndex,currdriverstate);
|
|
|
|
Adapter->LEDInfo.bIdle_led_off = FALSE;
|
|
|
|
if((GPIO_num_tx == DISABLE_GPIO_NUM) && (GPIO_num_rx == DISABLE_GPIO_NUM))
|
|
{
|
|
GPIO_num = DISABLE_GPIO_NUM ;
|
|
}
|
|
else
|
|
{
|
|
timeout = 50;
|
|
if(Adapter->LEDInfo.bIdleMode_tx_from_host)
|
|
LED_Blink(Adapter, 1<<GPIO_num_tx, uiTxLedIndex, timeout, -1,currdriverstate);
|
|
else
|
|
LED_Blink(Adapter, 1<<GPIO_num_rx, uiRxLedIndex, timeout, -1,currdriverstate);
|
|
}
|
|
#endif
|
|
}
|
|
break;
|
|
case DRIVER_HALT:
|
|
{
|
|
currdriverstate = DRIVER_HALT;
|
|
GPIO_num = DISABLE_GPIO_NUM;
|
|
for(uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++)
|
|
{
|
|
if(Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num !=
|
|
DISABLE_GPIO_NUM)
|
|
TURN_OFF_LED((1<<Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num),uiIndex);
|
|
}
|
|
//Adapter->DriverState = DRIVER_INIT;
|
|
}
|
|
break;
|
|
case LED_THREAD_INACTIVE :
|
|
{
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"InActivating LED thread...");
|
|
currdriverstate = LED_THREAD_INACTIVE;
|
|
Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_RUNNING_INACTIVELY ;
|
|
Adapter->LEDInfo.bLedInitDone = FALSE ;
|
|
//disable ALL LED
|
|
for(uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++)
|
|
{
|
|
if(Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num !=
|
|
DISABLE_GPIO_NUM)
|
|
TURN_OFF_LED((1<<Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num),uiIndex);
|
|
}
|
|
}
|
|
break;
|
|
case LED_THREAD_ACTIVE :
|
|
{
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"Activating LED thread again...");
|
|
if(Adapter->LinkUpStatus == FALSE)
|
|
Adapter->DriverState = NO_NETWORK_ENTRY;
|
|
else
|
|
Adapter->DriverState = NORMAL_OPERATION;
|
|
|
|
Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_RUNNING_ACTIVELY ;
|
|
}
|
|
break;
|
|
//return;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED;
|
|
}
|
|
|
|
int InitLedSettings(PMINI_ADAPTER Adapter)
|
|
{
|
|
int Status = STATUS_SUCCESS;
|
|
BOOLEAN bEnableThread = TRUE;
|
|
UCHAR uiIndex = 0;
|
|
|
|
/*Initially set BitPolarity to normal polarity. The bit 8 of LED type
|
|
* is used to change the polarity of the LED.*/
|
|
|
|
for(uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {
|
|
Adapter->LEDInfo.LEDState[uiIndex].BitPolarity = 1;
|
|
}
|
|
|
|
/*Read the LED settings of CONFIG file and map it to GPIO numbers in EEPROM*/
|
|
Status = ReadConfigFileStructure(Adapter, &bEnableThread);
|
|
if(STATUS_SUCCESS != Status)
|
|
{
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: FAILED in ReadConfigFileStructure\n");
|
|
return Status;
|
|
}
|
|
|
|
if(Adapter->LEDInfo.led_thread_running)
|
|
{
|
|
if(bEnableThread)
|
|
;
|
|
else
|
|
{
|
|
Adapter->DriverState = DRIVER_HALT;
|
|
wake_up(&Adapter->LEDInfo.notify_led_event);
|
|
Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED;
|
|
}
|
|
|
|
}
|
|
|
|
else if(bEnableThread)
|
|
{
|
|
/*Create secondary thread to handle the LEDs*/
|
|
init_waitqueue_head(&Adapter->LEDInfo.notify_led_event);
|
|
init_waitqueue_head(&Adapter->LEDInfo.idleModeSyncEvent);
|
|
Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_RUNNING_ACTIVELY;
|
|
Adapter->LEDInfo.bIdle_led_off = FALSE;
|
|
Adapter->LEDInfo.led_cntrl_threadid = kthread_run((int (*)(void *))
|
|
LEDControlThread, Adapter, "led_control_thread");
|
|
if(IS_ERR(Adapter->LEDInfo.led_cntrl_threadid))
|
|
{
|
|
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Not able to spawn Kernel Thread\n");
|
|
Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED;
|
|
return PTR_ERR(Adapter->LEDInfo.led_cntrl_threadid);
|
|
}
|
|
}
|
|
return Status;
|
|
}
|