1559 lines
40 KiB
C
1559 lines
40 KiB
C
/*
|
|
* Driver for A2 audio system used in SGI machines
|
|
* Copyright (c) 2001, 2002, 2003 Ladislav Michl <ladis@linux-mips.org>
|
|
*
|
|
* Based on Ulf Carlsson's code.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Supported devices:
|
|
* /dev/dsp standard dsp device, (mostly) OSS compatible
|
|
* /dev/mixer standard mixer device, (mostly) OSS compatible
|
|
*
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/poll.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/sound.h>
|
|
#include <linux/soundcard.h>
|
|
#include <linux/mutex.h>
|
|
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/sgi/hpc3.h>
|
|
#include <asm/sgi/ip22.h>
|
|
|
|
#include "hal2.h"
|
|
|
|
#if 0
|
|
#define DEBUG(args...) printk(args)
|
|
#else
|
|
#define DEBUG(args...)
|
|
#endif
|
|
|
|
#if 0
|
|
#define DEBUG_MIX(args...) printk(args)
|
|
#else
|
|
#define DEBUG_MIX(args...)
|
|
#endif
|
|
|
|
/*
|
|
* Before touching these look how it works. It is a bit unusual I know,
|
|
* but it helps to keep things simple. This driver is considered complete
|
|
* and I won't add any new features although hardware has many cool
|
|
* capabilities.
|
|
* (Historical note: HAL2 driver was first written by Ulf Carlsson - ALSA
|
|
* 0.3 running with 2.2.x kernel. Then ALSA changed completely and it
|
|
* seemed easier to me to write OSS driver from scratch - this one. Now
|
|
* when ALSA is official part of 2.6 kernel it's time to write ALSA driver
|
|
* using (hopefully) final version of ALSA interface)
|
|
*/
|
|
#define H2_BLOCK_SIZE 1024
|
|
#define H2_ADC_BUFSIZE 8192
|
|
#define H2_DAC_BUFSIZE 16834
|
|
|
|
struct hal2_pbus {
|
|
struct hpc3_pbus_dmacregs *pbus;
|
|
int pbusnr;
|
|
unsigned int ctrl; /* Current state of pbus->pbdma_ctrl */
|
|
};
|
|
|
|
struct hal2_desc {
|
|
struct hpc_dma_desc desc;
|
|
u32 cnt; /* don't touch, it is also padding */
|
|
};
|
|
|
|
struct hal2_codec {
|
|
unsigned char *buffer;
|
|
struct hal2_desc *desc;
|
|
int desc_count;
|
|
int tail, head; /* tail index, head index */
|
|
struct hal2_pbus pbus;
|
|
unsigned int format; /* Audio data format */
|
|
int voices; /* mono/stereo */
|
|
unsigned int sample_rate;
|
|
unsigned int master; /* Master frequency */
|
|
unsigned short mod; /* MOD value */
|
|
unsigned short inc; /* INC value */
|
|
|
|
wait_queue_head_t dma_wait;
|
|
spinlock_t lock;
|
|
struct mutex sem;
|
|
|
|
int usecount; /* recording and playback are
|
|
* independent */
|
|
};
|
|
|
|
#define H2_MIX_OUTPUT_ATT 0
|
|
#define H2_MIX_INPUT_GAIN 1
|
|
#define H2_MIXERS 2
|
|
struct hal2_mixer {
|
|
int modcnt;
|
|
unsigned int master;
|
|
unsigned int volume[H2_MIXERS];
|
|
};
|
|
|
|
struct hal2_card {
|
|
int dev_dsp; /* audio device */
|
|
int dev_mixer; /* mixer device */
|
|
int dev_midi; /* midi device */
|
|
|
|
struct hal2_ctl_regs *ctl_regs; /* HAL2 ctl registers */
|
|
struct hal2_aes_regs *aes_regs; /* HAL2 aes registers */
|
|
struct hal2_vol_regs *vol_regs; /* HAL2 vol registers */
|
|
struct hal2_syn_regs *syn_regs; /* HAL2 syn registers */
|
|
|
|
struct hal2_codec dac;
|
|
struct hal2_codec adc;
|
|
struct hal2_mixer mixer;
|
|
};
|
|
|
|
#define H2_INDIRECT_WAIT(regs) while (regs->isr & H2_ISR_TSTATUS);
|
|
|
|
#define H2_READ_ADDR(addr) (addr | (1<<7))
|
|
#define H2_WRITE_ADDR(addr) (addr)
|
|
|
|
static char *hal2str = "HAL2";
|
|
|
|
/*
|
|
* I doubt anyone has a machine with two HAL2 cards. It's possible to
|
|
* have two HPC's, so it is probably possible to have two HAL2 cards.
|
|
* Try to deal with it, but note that it is not tested.
|
|
*/
|
|
#define MAXCARDS 2
|
|
static struct hal2_card* hal2_card[MAXCARDS];
|
|
|
|
static const struct {
|
|
unsigned char idx:4, avail:1;
|
|
} mixtable[SOUND_MIXER_NRDEVICES] = {
|
|
[SOUND_MIXER_PCM] = { H2_MIX_OUTPUT_ATT, 1 }, /* voice */
|
|
[SOUND_MIXER_MIC] = { H2_MIX_INPUT_GAIN, 1 }, /* mic */
|
|
};
|
|
|
|
#define H2_SUPPORTED_FORMATS (AFMT_S16_LE | AFMT_S16_BE)
|
|
|
|
static inline void hal2_isr_write(struct hal2_card *hal2, u16 val)
|
|
{
|
|
hal2->ctl_regs->isr = val;
|
|
}
|
|
|
|
static inline u16 hal2_isr_look(struct hal2_card *hal2)
|
|
{
|
|
return hal2->ctl_regs->isr;
|
|
}
|
|
|
|
static inline u16 hal2_rev_look(struct hal2_card *hal2)
|
|
{
|
|
return hal2->ctl_regs->rev;
|
|
}
|
|
|
|
#ifdef HAL2_DUMP_REGS
|
|
static u16 hal2_i_look16(struct hal2_card *hal2, u16 addr)
|
|
{
|
|
struct hal2_ctl_regs *regs = hal2->ctl_regs;
|
|
|
|
regs->iar = H2_READ_ADDR(addr);
|
|
H2_INDIRECT_WAIT(regs);
|
|
return regs->idr0;
|
|
}
|
|
#endif
|
|
|
|
static u32 hal2_i_look32(struct hal2_card *hal2, u16 addr)
|
|
{
|
|
u32 ret;
|
|
struct hal2_ctl_regs *regs = hal2->ctl_regs;
|
|
|
|
regs->iar = H2_READ_ADDR(addr);
|
|
H2_INDIRECT_WAIT(regs);
|
|
ret = regs->idr0 & 0xffff;
|
|
regs->iar = H2_READ_ADDR(addr | 0x1);
|
|
H2_INDIRECT_WAIT(regs);
|
|
ret |= (regs->idr0 & 0xffff) << 16;
|
|
return ret;
|
|
}
|
|
|
|
static void hal2_i_write16(struct hal2_card *hal2, u16 addr, u16 val)
|
|
{
|
|
struct hal2_ctl_regs *regs = hal2->ctl_regs;
|
|
|
|
regs->idr0 = val;
|
|
regs->idr1 = 0;
|
|
regs->idr2 = 0;
|
|
regs->idr3 = 0;
|
|
regs->iar = H2_WRITE_ADDR(addr);
|
|
H2_INDIRECT_WAIT(regs);
|
|
}
|
|
|
|
static void hal2_i_write32(struct hal2_card *hal2, u16 addr, u32 val)
|
|
{
|
|
struct hal2_ctl_regs *regs = hal2->ctl_regs;
|
|
|
|
regs->idr0 = val & 0xffff;
|
|
regs->idr1 = val >> 16;
|
|
regs->idr2 = 0;
|
|
regs->idr3 = 0;
|
|
regs->iar = H2_WRITE_ADDR(addr);
|
|
H2_INDIRECT_WAIT(regs);
|
|
}
|
|
|
|
static void hal2_i_setbit16(struct hal2_card *hal2, u16 addr, u16 bit)
|
|
{
|
|
struct hal2_ctl_regs *regs = hal2->ctl_regs;
|
|
|
|
regs->iar = H2_READ_ADDR(addr);
|
|
H2_INDIRECT_WAIT(regs);
|
|
regs->idr0 = (regs->idr0 & 0xffff) | bit;
|
|
regs->idr1 = 0;
|
|
regs->idr2 = 0;
|
|
regs->idr3 = 0;
|
|
regs->iar = H2_WRITE_ADDR(addr);
|
|
H2_INDIRECT_WAIT(regs);
|
|
}
|
|
|
|
static void hal2_i_setbit32(struct hal2_card *hal2, u16 addr, u32 bit)
|
|
{
|
|
u32 tmp;
|
|
struct hal2_ctl_regs *regs = hal2->ctl_regs;
|
|
|
|
regs->iar = H2_READ_ADDR(addr);
|
|
H2_INDIRECT_WAIT(regs);
|
|
tmp = (regs->idr0 & 0xffff) | (regs->idr1 << 16) | bit;
|
|
regs->idr0 = tmp & 0xffff;
|
|
regs->idr1 = tmp >> 16;
|
|
regs->idr2 = 0;
|
|
regs->idr3 = 0;
|
|
regs->iar = H2_WRITE_ADDR(addr);
|
|
H2_INDIRECT_WAIT(regs);
|
|
}
|
|
|
|
static void hal2_i_clearbit16(struct hal2_card *hal2, u16 addr, u16 bit)
|
|
{
|
|
struct hal2_ctl_regs *regs = hal2->ctl_regs;
|
|
|
|
regs->iar = H2_READ_ADDR(addr);
|
|
H2_INDIRECT_WAIT(regs);
|
|
regs->idr0 = (regs->idr0 & 0xffff) & ~bit;
|
|
regs->idr1 = 0;
|
|
regs->idr2 = 0;
|
|
regs->idr3 = 0;
|
|
regs->iar = H2_WRITE_ADDR(addr);
|
|
H2_INDIRECT_WAIT(regs);
|
|
}
|
|
|
|
#if 0
|
|
static void hal2_i_clearbit32(struct hal2_card *hal2, u16 addr, u32 bit)
|
|
{
|
|
u32 tmp;
|
|
hal2_ctl_regs_t *regs = hal2->ctl_regs;
|
|
|
|
regs->iar = H2_READ_ADDR(addr);
|
|
H2_INDIRECT_WAIT(regs);
|
|
tmp = ((regs->idr0 & 0xffff) | (regs->idr1 << 16)) & ~bit;
|
|
regs->idr0 = tmp & 0xffff;
|
|
regs->idr1 = tmp >> 16;
|
|
regs->idr2 = 0;
|
|
regs->idr3 = 0;
|
|
regs->iar = H2_WRITE_ADDR(addr);
|
|
H2_INDIRECT_WAIT(regs);
|
|
}
|
|
#endif
|
|
|
|
#ifdef HAL2_DUMP_REGS
|
|
static void hal2_dump_regs(struct hal2_card *hal2)
|
|
{
|
|
DEBUG("isr: %08hx ", hal2_isr_look(hal2));
|
|
DEBUG("rev: %08hx\n", hal2_rev_look(hal2));
|
|
DEBUG("relay: %04hx\n", hal2_i_look16(hal2, H2I_RELAY_C));
|
|
DEBUG("port en: %04hx ", hal2_i_look16(hal2, H2I_DMA_PORT_EN));
|
|
DEBUG("dma end: %04hx ", hal2_i_look16(hal2, H2I_DMA_END));
|
|
DEBUG("dma drv: %04hx\n", hal2_i_look16(hal2, H2I_DMA_DRV));
|
|
DEBUG("syn ctl: %04hx ", hal2_i_look16(hal2, H2I_SYNTH_C));
|
|
DEBUG("aesrx ctl: %04hx ", hal2_i_look16(hal2, H2I_AESRX_C));
|
|
DEBUG("aestx ctl: %04hx ", hal2_i_look16(hal2, H2I_AESTX_C));
|
|
DEBUG("dac ctl1: %04hx ", hal2_i_look16(hal2, H2I_ADC_C1));
|
|
DEBUG("dac ctl2: %08x ", hal2_i_look32(hal2, H2I_ADC_C2));
|
|
DEBUG("adc ctl1: %04hx ", hal2_i_look16(hal2, H2I_DAC_C1));
|
|
DEBUG("adc ctl2: %08x ", hal2_i_look32(hal2, H2I_DAC_C2));
|
|
DEBUG("syn map: %04hx\n", hal2_i_look16(hal2, H2I_SYNTH_MAP_C));
|
|
DEBUG("bres1 ctl1: %04hx ", hal2_i_look16(hal2, H2I_BRES1_C1));
|
|
DEBUG("bres1 ctl2: %04x ", hal2_i_look32(hal2, H2I_BRES1_C2));
|
|
DEBUG("bres2 ctl1: %04hx ", hal2_i_look16(hal2, H2I_BRES2_C1));
|
|
DEBUG("bres2 ctl2: %04x ", hal2_i_look32(hal2, H2I_BRES2_C2));
|
|
DEBUG("bres3 ctl1: %04hx ", hal2_i_look16(hal2, H2I_BRES3_C1));
|
|
DEBUG("bres3 ctl2: %04x\n", hal2_i_look32(hal2, H2I_BRES3_C2));
|
|
}
|
|
#endif
|
|
|
|
static struct hal2_card* hal2_dsp_find_card(int minor)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < MAXCARDS; i++)
|
|
if (hal2_card[i] != NULL && hal2_card[i]->dev_dsp == minor)
|
|
return hal2_card[i];
|
|
return NULL;
|
|
}
|
|
|
|
static struct hal2_card* hal2_mixer_find_card(int minor)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < MAXCARDS; i++)
|
|
if (hal2_card[i] != NULL && hal2_card[i]->dev_mixer == minor)
|
|
return hal2_card[i];
|
|
return NULL;
|
|
}
|
|
|
|
static void hal2_inc_head(struct hal2_codec *codec)
|
|
{
|
|
codec->head++;
|
|
if (codec->head == codec->desc_count)
|
|
codec->head = 0;
|
|
}
|
|
|
|
static void hal2_inc_tail(struct hal2_codec *codec)
|
|
{
|
|
codec->tail++;
|
|
if (codec->tail == codec->desc_count)
|
|
codec->tail = 0;
|
|
}
|
|
|
|
static void hal2_dac_interrupt(struct hal2_codec *dac)
|
|
{
|
|
int running;
|
|
|
|
spin_lock(&dac->lock);
|
|
/* if tail buffer contains zero samples DMA stream was already
|
|
* stopped */
|
|
running = dac->desc[dac->tail].cnt;
|
|
dac->desc[dac->tail].cnt = 0;
|
|
dac->desc[dac->tail].desc.cntinfo = HPCDMA_XIE | HPCDMA_EOX;
|
|
/* we just proccessed empty buffer, don't update tail pointer */
|
|
if (running)
|
|
hal2_inc_tail(dac);
|
|
spin_unlock(&dac->lock);
|
|
|
|
wake_up(&dac->dma_wait);
|
|
}
|
|
|
|
static void hal2_adc_interrupt(struct hal2_codec *adc)
|
|
{
|
|
int running;
|
|
|
|
spin_lock(&adc->lock);
|
|
/* if head buffer contains nonzero samples DMA stream was already
|
|
* stopped */
|
|
running = !adc->desc[adc->head].cnt;
|
|
adc->desc[adc->head].cnt = H2_BLOCK_SIZE;
|
|
adc->desc[adc->head].desc.cntinfo = HPCDMA_XIE | HPCDMA_EOR;
|
|
/* we just proccessed empty buffer, don't update head pointer */
|
|
if (running)
|
|
hal2_inc_head(adc);
|
|
spin_unlock(&adc->lock);
|
|
|
|
wake_up(&adc->dma_wait);
|
|
}
|
|
|
|
static irqreturn_t hal2_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct hal2_card *hal2 = dev_id;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
|
|
/* decide what caused this interrupt */
|
|
if (hal2->dac.pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_INT) {
|
|
hal2_dac_interrupt(&hal2->dac);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
if (hal2->adc.pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_INT) {
|
|
hal2_adc_interrupt(&hal2->adc);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int hal2_compute_rate(struct hal2_codec *codec, unsigned int rate)
|
|
{
|
|
unsigned short mod;
|
|
|
|
DEBUG("rate: %d\n", rate);
|
|
|
|
if (rate < 4000) rate = 4000;
|
|
else if (rate > 48000) rate = 48000;
|
|
|
|
if (44100 % rate < 48000 % rate) {
|
|
mod = 4 * 44100 / rate;
|
|
codec->master = 44100;
|
|
} else {
|
|
mod = 4 * 48000 / rate;
|
|
codec->master = 48000;
|
|
}
|
|
|
|
codec->inc = 4;
|
|
codec->mod = mod;
|
|
rate = 4 * codec->master / mod;
|
|
|
|
DEBUG("real_rate: %d\n", rate);
|
|
|
|
return rate;
|
|
}
|
|
|
|
static void hal2_set_dac_rate(struct hal2_card *hal2)
|
|
{
|
|
unsigned int master = hal2->dac.master;
|
|
int inc = hal2->dac.inc;
|
|
int mod = hal2->dac.mod;
|
|
|
|
DEBUG("master: %d inc: %d mod: %d\n", master, inc, mod);
|
|
|
|
hal2_i_write16(hal2, H2I_BRES1_C1, (master == 44100) ? 1 : 0);
|
|
hal2_i_write32(hal2, H2I_BRES1_C2, ((0xffff & (inc - mod - 1)) << 16) | inc);
|
|
}
|
|
|
|
static void hal2_set_adc_rate(struct hal2_card *hal2)
|
|
{
|
|
unsigned int master = hal2->adc.master;
|
|
int inc = hal2->adc.inc;
|
|
int mod = hal2->adc.mod;
|
|
|
|
DEBUG("master: %d inc: %d mod: %d\n", master, inc, mod);
|
|
|
|
hal2_i_write16(hal2, H2I_BRES2_C1, (master == 44100) ? 1 : 0);
|
|
hal2_i_write32(hal2, H2I_BRES2_C2, ((0xffff & (inc - mod - 1)) << 16) | inc);
|
|
}
|
|
|
|
static void hal2_setup_dac(struct hal2_card *hal2)
|
|
{
|
|
unsigned int fifobeg, fifoend, highwater, sample_size;
|
|
struct hal2_pbus *pbus = &hal2->dac.pbus;
|
|
|
|
DEBUG("hal2_setup_dac\n");
|
|
|
|
/* Now we set up some PBUS information. The PBUS needs information about
|
|
* what portion of the fifo it will use. If it's receiving or
|
|
* transmitting, and finally whether the stream is little endian or big
|
|
* endian. The information is written later, on the start call.
|
|
*/
|
|
sample_size = 2 * hal2->dac.voices;
|
|
/* Fifo should be set to hold exactly four samples. Highwater mark
|
|
* should be set to two samples. */
|
|
highwater = (sample_size * 2) >> 1; /* halfwords */
|
|
fifobeg = 0; /* playback is first */
|
|
fifoend = (sample_size * 4) >> 3; /* doublewords */
|
|
pbus->ctrl = HPC3_PDMACTRL_RT | HPC3_PDMACTRL_LD |
|
|
(highwater << 8) | (fifobeg << 16) | (fifoend << 24) |
|
|
(hal2->dac.format & AFMT_S16_LE ? HPC3_PDMACTRL_SEL : 0);
|
|
/* We disable everything before we do anything at all */
|
|
pbus->pbus->pbdma_ctrl = HPC3_PDMACTRL_LD;
|
|
hal2_i_clearbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECTX);
|
|
/* Setup the HAL2 for playback */
|
|
hal2_set_dac_rate(hal2);
|
|
/* Set endianess */
|
|
if (hal2->dac.format & AFMT_S16_LE)
|
|
hal2_i_setbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECTX);
|
|
else
|
|
hal2_i_clearbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECTX);
|
|
/* Set DMA bus */
|
|
hal2_i_setbit16(hal2, H2I_DMA_DRV, (1 << pbus->pbusnr));
|
|
/* We are using 1st Bresenham clock generator for playback */
|
|
hal2_i_write16(hal2, H2I_DAC_C1, (pbus->pbusnr << H2I_C1_DMA_SHIFT)
|
|
| (1 << H2I_C1_CLKID_SHIFT)
|
|
| (hal2->dac.voices << H2I_C1_DATAT_SHIFT));
|
|
}
|
|
|
|
static void hal2_setup_adc(struct hal2_card *hal2)
|
|
{
|
|
unsigned int fifobeg, fifoend, highwater, sample_size;
|
|
struct hal2_pbus *pbus = &hal2->adc.pbus;
|
|
|
|
DEBUG("hal2_setup_adc\n");
|
|
|
|
sample_size = 2 * hal2->adc.voices;
|
|
highwater = (sample_size * 2) >> 1; /* halfwords */
|
|
fifobeg = (4 * 4) >> 3; /* record is second */
|
|
fifoend = (4 * 4 + sample_size * 4) >> 3; /* doublewords */
|
|
pbus->ctrl = HPC3_PDMACTRL_RT | HPC3_PDMACTRL_RCV | HPC3_PDMACTRL_LD |
|
|
(highwater << 8) | (fifobeg << 16) | (fifoend << 24) |
|
|
(hal2->adc.format & AFMT_S16_LE ? HPC3_PDMACTRL_SEL : 0);
|
|
pbus->pbus->pbdma_ctrl = HPC3_PDMACTRL_LD;
|
|
hal2_i_clearbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECR);
|
|
/* Setup the HAL2 for record */
|
|
hal2_set_adc_rate(hal2);
|
|
/* Set endianess */
|
|
if (hal2->adc.format & AFMT_S16_LE)
|
|
hal2_i_setbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECR);
|
|
else
|
|
hal2_i_clearbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECR);
|
|
/* Set DMA bus */
|
|
hal2_i_setbit16(hal2, H2I_DMA_DRV, (1 << pbus->pbusnr));
|
|
/* We are using 2nd Bresenham clock generator for record */
|
|
hal2_i_write16(hal2, H2I_ADC_C1, (pbus->pbusnr << H2I_C1_DMA_SHIFT)
|
|
| (2 << H2I_C1_CLKID_SHIFT)
|
|
| (hal2->adc.voices << H2I_C1_DATAT_SHIFT));
|
|
}
|
|
|
|
static dma_addr_t hal2_desc_addr(struct hal2_codec *codec, int i)
|
|
{
|
|
if (--i < 0)
|
|
i = codec->desc_count - 1;
|
|
return codec->desc[i].desc.pnext;
|
|
}
|
|
|
|
static void hal2_start_dac(struct hal2_card *hal2)
|
|
{
|
|
struct hal2_codec *dac = &hal2->dac;
|
|
struct hal2_pbus *pbus = &dac->pbus;
|
|
|
|
pbus->pbus->pbdma_dptr = hal2_desc_addr(dac, dac->tail);
|
|
pbus->pbus->pbdma_ctrl = pbus->ctrl | HPC3_PDMACTRL_ACT;
|
|
/* enable DAC */
|
|
hal2_i_setbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECTX);
|
|
}
|
|
|
|
static void hal2_start_adc(struct hal2_card *hal2)
|
|
{
|
|
struct hal2_codec *adc = &hal2->adc;
|
|
struct hal2_pbus *pbus = &adc->pbus;
|
|
|
|
pbus->pbus->pbdma_dptr = hal2_desc_addr(adc, adc->head);
|
|
pbus->pbus->pbdma_ctrl = pbus->ctrl | HPC3_PDMACTRL_ACT;
|
|
/* enable ADC */
|
|
hal2_i_setbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECR);
|
|
}
|
|
|
|
static inline void hal2_stop_dac(struct hal2_card *hal2)
|
|
{
|
|
hal2->dac.pbus.pbus->pbdma_ctrl = HPC3_PDMACTRL_LD;
|
|
/* The HAL2 itself may remain enabled safely */
|
|
}
|
|
|
|
static inline void hal2_stop_adc(struct hal2_card *hal2)
|
|
{
|
|
hal2->adc.pbus.pbus->pbdma_ctrl = HPC3_PDMACTRL_LD;
|
|
}
|
|
|
|
static int hal2_alloc_dmabuf(struct hal2_codec *codec, int size,
|
|
int count, int cntinfo, int dir)
|
|
{
|
|
struct hal2_desc *desc, *dma_addr;
|
|
int i;
|
|
|
|
DEBUG("allocating %dk DMA buffer.\n", size / 1024);
|
|
|
|
codec->buffer = (unsigned char *)__get_free_pages(GFP_KERNEL | GFP_DMA,
|
|
get_order(size));
|
|
if (!codec->buffer)
|
|
return -ENOMEM;
|
|
desc = dma_alloc_coherent(NULL, count * sizeof(struct hal2_desc),
|
|
(dma_addr_t *)&dma_addr, GFP_KERNEL);
|
|
if (!desc) {
|
|
free_pages((unsigned long)codec->buffer, get_order(size));
|
|
return -ENOMEM;
|
|
}
|
|
codec->desc = desc;
|
|
for (i = 0; i < count; i++) {
|
|
desc->desc.pbuf = dma_map_single(NULL,
|
|
(void *)(codec->buffer + i * H2_BLOCK_SIZE),
|
|
H2_BLOCK_SIZE, dir);
|
|
desc->desc.cntinfo = cntinfo;
|
|
desc->desc.pnext = (i == count - 1) ?
|
|
(u32)dma_addr : (u32)(dma_addr + i + 1);
|
|
desc->cnt = 0;
|
|
desc++;
|
|
}
|
|
codec->desc_count = count;
|
|
codec->head = codec->tail = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int hal2_alloc_dac_dmabuf(struct hal2_codec *codec)
|
|
{
|
|
return hal2_alloc_dmabuf(codec, H2_DAC_BUFSIZE,
|
|
H2_DAC_BUFSIZE / H2_BLOCK_SIZE,
|
|
HPCDMA_XIE | HPCDMA_EOX,
|
|
DMA_TO_DEVICE);
|
|
}
|
|
|
|
static int hal2_alloc_adc_dmabuf(struct hal2_codec *codec)
|
|
{
|
|
return hal2_alloc_dmabuf(codec, H2_ADC_BUFSIZE,
|
|
H2_ADC_BUFSIZE / H2_BLOCK_SIZE,
|
|
HPCDMA_XIE | H2_BLOCK_SIZE,
|
|
DMA_TO_DEVICE);
|
|
}
|
|
|
|
static void hal2_free_dmabuf(struct hal2_codec *codec, int size, int dir)
|
|
{
|
|
dma_addr_t dma_addr;
|
|
int i;
|
|
|
|
dma_addr = codec->desc[codec->desc_count - 1].desc.pnext;
|
|
for (i = 0; i < codec->desc_count; i++)
|
|
dma_unmap_single(NULL, codec->desc[i].desc.pbuf,
|
|
H2_BLOCK_SIZE, dir);
|
|
dma_free_coherent(NULL, codec->desc_count * sizeof(struct hal2_desc),
|
|
(void *)codec->desc, dma_addr);
|
|
free_pages((unsigned long)codec->buffer, get_order(size));
|
|
}
|
|
|
|
static void hal2_free_dac_dmabuf(struct hal2_codec *codec)
|
|
{
|
|
return hal2_free_dmabuf(codec, H2_DAC_BUFSIZE, DMA_TO_DEVICE);
|
|
}
|
|
|
|
static void hal2_free_adc_dmabuf(struct hal2_codec *codec)
|
|
{
|
|
return hal2_free_dmabuf(codec, H2_ADC_BUFSIZE, DMA_FROM_DEVICE);
|
|
}
|
|
|
|
/*
|
|
* Add 'count' bytes to 'buffer' from DMA ring buffers. Return number of
|
|
* bytes added or -EFAULT if copy_from_user failed.
|
|
*/
|
|
static int hal2_get_buffer(struct hal2_card *hal2, char *buffer, int count)
|
|
{
|
|
unsigned long flags;
|
|
int size, ret = 0;
|
|
unsigned char *buf;
|
|
struct hal2_desc *tail;
|
|
struct hal2_codec *adc = &hal2->adc;
|
|
|
|
DEBUG("getting %d bytes ", count);
|
|
|
|
spin_lock_irqsave(&adc->lock, flags);
|
|
tail = &adc->desc[adc->tail];
|
|
/* enable DMA stream if there are no data */
|
|
if (!tail->cnt && !(adc->pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_ISACT))
|
|
hal2_start_adc(hal2);
|
|
while (tail->cnt > 0 && count > 0) {
|
|
size = min((int)tail->cnt, count);
|
|
buf = &adc->buffer[(adc->tail + 1) * H2_BLOCK_SIZE - tail->cnt];
|
|
spin_unlock_irqrestore(&adc->lock, flags);
|
|
dma_sync_single(NULL, tail->desc.pbuf, size, DMA_FROM_DEVICE);
|
|
if (copy_to_user(buffer, buf, size)) {
|
|
ret = -EFAULT;
|
|
goto out;
|
|
}
|
|
spin_lock_irqsave(&adc->lock, flags);
|
|
tail->cnt -= size;
|
|
/* buffer is empty, update tail pointer */
|
|
if (tail->cnt == 0) {
|
|
tail->desc.cntinfo = HPCDMA_XIE | H2_BLOCK_SIZE;
|
|
hal2_inc_tail(adc);
|
|
tail = &adc->desc[adc->tail];
|
|
/* enable DMA stream again if needed */
|
|
if (!(adc->pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_ISACT))
|
|
hal2_start_adc(hal2);
|
|
}
|
|
buffer += size;
|
|
ret += size;
|
|
count -= size;
|
|
|
|
DEBUG("(%d) ", size);
|
|
}
|
|
spin_unlock_irqrestore(&adc->lock, flags);
|
|
out:
|
|
DEBUG("\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Add 'count' bytes from 'buffer' to DMA ring buffers. Return number of
|
|
* bytes added or -EFAULT if copy_from_user failed.
|
|
*/
|
|
static int hal2_add_buffer(struct hal2_card *hal2, char *buffer, int count)
|
|
{
|
|
unsigned long flags;
|
|
unsigned char *buf;
|
|
int size, ret = 0;
|
|
struct hal2_desc *head;
|
|
struct hal2_codec *dac = &hal2->dac;
|
|
|
|
DEBUG("adding %d bytes ", count);
|
|
|
|
spin_lock_irqsave(&dac->lock, flags);
|
|
head = &dac->desc[dac->head];
|
|
while (head->cnt == 0 && count > 0) {
|
|
size = min((int)H2_BLOCK_SIZE, count);
|
|
buf = &dac->buffer[dac->head * H2_BLOCK_SIZE];
|
|
spin_unlock_irqrestore(&dac->lock, flags);
|
|
if (copy_from_user(buf, buffer, size)) {
|
|
ret = -EFAULT;
|
|
goto out;
|
|
}
|
|
dma_sync_single(NULL, head->desc.pbuf, size, DMA_TO_DEVICE);
|
|
spin_lock_irqsave(&dac->lock, flags);
|
|
head->desc.cntinfo = size | HPCDMA_XIE;
|
|
head->cnt = size;
|
|
buffer += size;
|
|
ret += size;
|
|
count -= size;
|
|
hal2_inc_head(dac);
|
|
head = &dac->desc[dac->head];
|
|
|
|
DEBUG("(%d) ", size);
|
|
}
|
|
if (!(dac->pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_ISACT) && ret > 0)
|
|
hal2_start_dac(hal2);
|
|
spin_unlock_irqrestore(&dac->lock, flags);
|
|
out:
|
|
DEBUG("\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
#define hal2_reset_dac_pointer(hal2) hal2_reset_pointer(hal2, 1)
|
|
#define hal2_reset_adc_pointer(hal2) hal2_reset_pointer(hal2, 0)
|
|
static void hal2_reset_pointer(struct hal2_card *hal2, int is_dac)
|
|
{
|
|
int i;
|
|
struct hal2_codec *codec = (is_dac) ? &hal2->dac : &hal2->adc;
|
|
|
|
DEBUG("hal2_reset_pointer\n");
|
|
|
|
for (i = 0; i < codec->desc_count; i++) {
|
|
codec->desc[i].cnt = 0;
|
|
codec->desc[i].desc.cntinfo = HPCDMA_XIE | (is_dac) ?
|
|
HPCDMA_EOX : H2_BLOCK_SIZE;
|
|
}
|
|
codec->head = codec->tail = 0;
|
|
}
|
|
|
|
static int hal2_sync_dac(struct hal2_card *hal2)
|
|
{
|
|
DECLARE_WAITQUEUE(wait, current);
|
|
struct hal2_codec *dac = &hal2->dac;
|
|
int ret = 0;
|
|
unsigned long flags;
|
|
signed long timeout = 1000 * H2_BLOCK_SIZE * 2 * dac->voices *
|
|
HZ / dac->sample_rate / 900;
|
|
|
|
while (dac->pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_ISACT) {
|
|
add_wait_queue(&dac->dma_wait, &wait);
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
schedule_timeout(timeout);
|
|
spin_lock_irqsave(&dac->lock, flags);
|
|
if (dac->desc[dac->tail].cnt)
|
|
ret = -ETIME;
|
|
spin_unlock_irqrestore(&dac->lock, flags);
|
|
if (signal_pending(current))
|
|
ret = -ERESTARTSYS;
|
|
if (ret) {
|
|
hal2_stop_dac(hal2);
|
|
hal2_reset_dac_pointer(hal2);
|
|
}
|
|
remove_wait_queue(&dac->dma_wait, &wait);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int hal2_write_mixer(struct hal2_card *hal2, int index, int vol)
|
|
{
|
|
unsigned int l, r, tmp;
|
|
|
|
DEBUG_MIX("mixer %d write\n", index);
|
|
|
|
if (index >= SOUND_MIXER_NRDEVICES || !mixtable[index].avail)
|
|
return -EINVAL;
|
|
|
|
r = (vol >> 8) & 0xff;
|
|
if (r > 100)
|
|
r = 100;
|
|
l = vol & 0xff;
|
|
if (l > 100)
|
|
l = 100;
|
|
|
|
hal2->mixer.volume[mixtable[index].idx] = l | (r << 8);
|
|
|
|
switch (mixtable[index].idx) {
|
|
case H2_MIX_OUTPUT_ATT:
|
|
|
|
DEBUG_MIX("output attenuator %d,%d\n", l, r);
|
|
|
|
if (r | l) {
|
|
tmp = hal2_i_look32(hal2, H2I_DAC_C2);
|
|
tmp &= ~(H2I_C2_L_ATT_M | H2I_C2_R_ATT_M | H2I_C2_MUTE);
|
|
|
|
/* Attenuator has five bits */
|
|
l = 31 * (100 - l) / 99;
|
|
r = 31 * (100 - r) / 99;
|
|
|
|
DEBUG_MIX("left: %d, right %d\n", l, r);
|
|
|
|
tmp |= (l << H2I_C2_L_ATT_SHIFT) & H2I_C2_L_ATT_M;
|
|
tmp |= (r << H2I_C2_R_ATT_SHIFT) & H2I_C2_R_ATT_M;
|
|
hal2_i_write32(hal2, H2I_DAC_C2, tmp);
|
|
} else
|
|
hal2_i_setbit32(hal2, H2I_DAC_C2, H2I_C2_MUTE);
|
|
break;
|
|
case H2_MIX_INPUT_GAIN:
|
|
|
|
DEBUG_MIX("input gain %d,%d\n", l, r);
|
|
|
|
tmp = hal2_i_look32(hal2, H2I_ADC_C2);
|
|
tmp &= ~(H2I_C2_L_GAIN_M | H2I_C2_R_GAIN_M);
|
|
|
|
/* Gain control has four bits */
|
|
l = 16 * l / 100;
|
|
r = 16 * r / 100;
|
|
|
|
DEBUG_MIX("left: %d, right %d\n", l, r);
|
|
|
|
tmp |= (l << H2I_C2_L_GAIN_SHIFT) & H2I_C2_L_GAIN_M;
|
|
tmp |= (r << H2I_C2_R_GAIN_SHIFT) & H2I_C2_R_GAIN_M;
|
|
hal2_i_write32(hal2, H2I_ADC_C2, tmp);
|
|
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void hal2_init_mixer(struct hal2_card *hal2)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < SOUND_MIXER_NRDEVICES; i++)
|
|
if (mixtable[i].avail)
|
|
hal2->mixer.volume[mixtable[i].idx] = 100 | (100 << 8);
|
|
|
|
/* disable attenuator */
|
|
hal2_i_write32(hal2, H2I_DAC_C2, 0);
|
|
/* set max input gain */
|
|
hal2_i_write32(hal2, H2I_ADC_C2, H2I_C2_MUTE |
|
|
(H2I_C2_L_GAIN_M << H2I_C2_L_GAIN_SHIFT) |
|
|
(H2I_C2_R_GAIN_M << H2I_C2_R_GAIN_SHIFT));
|
|
/* set max volume */
|
|
hal2->mixer.master = 0xff;
|
|
hal2->vol_regs->left = 0xff;
|
|
hal2->vol_regs->right = 0xff;
|
|
}
|
|
|
|
/*
|
|
* XXX: later i'll implement mixer for main volume which will be disabled
|
|
* by default. enabling it users will be allowed to have master volume level
|
|
* control on panel in their favourite X desktop
|
|
*/
|
|
static void hal2_volume_control(int direction)
|
|
{
|
|
unsigned int master = hal2_card[0]->mixer.master;
|
|
struct hal2_vol_regs *vol = hal2_card[0]->vol_regs;
|
|
|
|
/* volume up */
|
|
if (direction > 0 && master < 0xff)
|
|
master++;
|
|
/* volume down */
|
|
else if (direction < 0 && master > 0)
|
|
master--;
|
|
/* TODO: mute/unmute */
|
|
vol->left = master;
|
|
vol->right = master;
|
|
hal2_card[0]->mixer.master = master;
|
|
}
|
|
|
|
static int hal2_mixer_ioctl(struct hal2_card *hal2, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
int val;
|
|
|
|
if (cmd == SOUND_MIXER_INFO) {
|
|
mixer_info info;
|
|
|
|
memset(&info, 0, sizeof(info));
|
|
strlcpy(info.id, hal2str, sizeof(info.id));
|
|
strlcpy(info.name, hal2str, sizeof(info.name));
|
|
info.modify_counter = hal2->mixer.modcnt;
|
|
if (copy_to_user((void *)arg, &info, sizeof(info)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
if (cmd == SOUND_OLD_MIXER_INFO) {
|
|
_old_mixer_info info;
|
|
|
|
memset(&info, 0, sizeof(info));
|
|
strlcpy(info.id, hal2str, sizeof(info.id));
|
|
strlcpy(info.name, hal2str, sizeof(info.name));
|
|
if (copy_to_user((void *)arg, &info, sizeof(info)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
if (cmd == OSS_GETVERSION)
|
|
return put_user(SOUND_VERSION, (int *)arg);
|
|
|
|
if (_IOC_TYPE(cmd) != 'M' || _IOC_SIZE(cmd) != sizeof(int))
|
|
return -EINVAL;
|
|
|
|
if (_IOC_DIR(cmd) == _IOC_READ) {
|
|
switch (_IOC_NR(cmd)) {
|
|
/* Give the current record source */
|
|
case SOUND_MIXER_RECSRC:
|
|
val = 0; /* FIXME */
|
|
break;
|
|
/* Give the supported mixers, all of them support stereo */
|
|
case SOUND_MIXER_DEVMASK:
|
|
case SOUND_MIXER_STEREODEVS: {
|
|
int i;
|
|
|
|
for (val = i = 0; i < SOUND_MIXER_NRDEVICES; i++)
|
|
if (mixtable[i].avail)
|
|
val |= 1 << i;
|
|
break;
|
|
}
|
|
/* Arg contains a bit for each supported recording source */
|
|
case SOUND_MIXER_RECMASK:
|
|
val = 0;
|
|
break;
|
|
case SOUND_MIXER_CAPS:
|
|
val = 0;
|
|
break;
|
|
/* Read a specific mixer */
|
|
default: {
|
|
int i = _IOC_NR(cmd);
|
|
|
|
if (i >= SOUND_MIXER_NRDEVICES || !mixtable[i].avail)
|
|
return -EINVAL;
|
|
val = hal2->mixer.volume[mixtable[i].idx];
|
|
break;
|
|
}
|
|
}
|
|
return put_user(val, (int *)arg);
|
|
}
|
|
|
|
if (_IOC_DIR(cmd) != (_IOC_WRITE|_IOC_READ))
|
|
return -EINVAL;
|
|
|
|
hal2->mixer.modcnt++;
|
|
|
|
if (get_user(val, (int *)arg))
|
|
return -EFAULT;
|
|
|
|
switch (_IOC_NR(cmd)) {
|
|
/* Arg contains a bit for each recording source */
|
|
case SOUND_MIXER_RECSRC:
|
|
return 0; /* FIXME */
|
|
default:
|
|
return hal2_write_mixer(hal2, _IOC_NR(cmd), val);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hal2_open_mixdev(struct inode *inode, struct file *file)
|
|
{
|
|
struct hal2_card *hal2 = hal2_mixer_find_card(iminor(inode));
|
|
|
|
if (hal2) {
|
|
file->private_data = hal2;
|
|
return nonseekable_open(inode, file);
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int hal2_release_mixdev(struct inode *inode, struct file *file)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int hal2_ioctl_mixdev(struct inode *inode, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
return hal2_mixer_ioctl((struct hal2_card *)file->private_data, cmd, arg);
|
|
}
|
|
|
|
static int hal2_ioctl(struct inode *inode, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
int val;
|
|
struct hal2_card *hal2 = (struct hal2_card *) file->private_data;
|
|
|
|
switch (cmd) {
|
|
case OSS_GETVERSION:
|
|
return put_user(SOUND_VERSION, (int *)arg);
|
|
|
|
case SNDCTL_DSP_SYNC:
|
|
if (file->f_mode & FMODE_WRITE)
|
|
return hal2_sync_dac(hal2);
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_SETDUPLEX:
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_GETCAPS:
|
|
return put_user(DSP_CAP_DUPLEX | DSP_CAP_MULTI, (int *)arg);
|
|
|
|
case SNDCTL_DSP_RESET:
|
|
if (file->f_mode & FMODE_READ) {
|
|
hal2_stop_adc(hal2);
|
|
hal2_reset_adc_pointer(hal2);
|
|
}
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
hal2_stop_dac(hal2);
|
|
hal2_reset_dac_pointer(hal2);
|
|
}
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_SPEED:
|
|
if (get_user(val, (int *)arg))
|
|
return -EFAULT;
|
|
if (file->f_mode & FMODE_READ) {
|
|
hal2_stop_adc(hal2);
|
|
val = hal2_compute_rate(&hal2->adc, val);
|
|
hal2->adc.sample_rate = val;
|
|
hal2_set_adc_rate(hal2);
|
|
}
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
hal2_stop_dac(hal2);
|
|
val = hal2_compute_rate(&hal2->dac, val);
|
|
hal2->dac.sample_rate = val;
|
|
hal2_set_dac_rate(hal2);
|
|
}
|
|
return put_user(val, (int *)arg);
|
|
|
|
case SNDCTL_DSP_STEREO:
|
|
if (get_user(val, (int *)arg))
|
|
return -EFAULT;
|
|
if (file->f_mode & FMODE_READ) {
|
|
hal2_stop_adc(hal2);
|
|
hal2->adc.voices = (val) ? 2 : 1;
|
|
hal2_setup_adc(hal2);
|
|
}
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
hal2_stop_dac(hal2);
|
|
hal2->dac.voices = (val) ? 2 : 1;
|
|
hal2_setup_dac(hal2);
|
|
}
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_CHANNELS:
|
|
if (get_user(val, (int *)arg))
|
|
return -EFAULT;
|
|
if (val != 0) {
|
|
if (file->f_mode & FMODE_READ) {
|
|
hal2_stop_adc(hal2);
|
|
hal2->adc.voices = (val == 1) ? 1 : 2;
|
|
hal2_setup_adc(hal2);
|
|
}
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
hal2_stop_dac(hal2);
|
|
hal2->dac.voices = (val == 1) ? 1 : 2;
|
|
hal2_setup_dac(hal2);
|
|
}
|
|
}
|
|
val = -EINVAL;
|
|
if (file->f_mode & FMODE_READ)
|
|
val = hal2->adc.voices;
|
|
if (file->f_mode & FMODE_WRITE)
|
|
val = hal2->dac.voices;
|
|
return put_user(val, (int *)arg);
|
|
|
|
case SNDCTL_DSP_GETFMTS: /* Returns a mask */
|
|
return put_user(H2_SUPPORTED_FORMATS, (int *)arg);
|
|
|
|
case SNDCTL_DSP_SETFMT: /* Selects ONE fmt*/
|
|
if (get_user(val, (int *)arg))
|
|
return -EFAULT;
|
|
if (val != AFMT_QUERY) {
|
|
if (!(val & H2_SUPPORTED_FORMATS))
|
|
return -EINVAL;
|
|
if (file->f_mode & FMODE_READ) {
|
|
hal2_stop_adc(hal2);
|
|
hal2->adc.format = val;
|
|
hal2_setup_adc(hal2);
|
|
}
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
hal2_stop_dac(hal2);
|
|
hal2->dac.format = val;
|
|
hal2_setup_dac(hal2);
|
|
}
|
|
} else {
|
|
val = -EINVAL;
|
|
if (file->f_mode & FMODE_READ)
|
|
val = hal2->adc.format;
|
|
if (file->f_mode & FMODE_WRITE)
|
|
val = hal2->dac.format;
|
|
}
|
|
return put_user(val, (int *)arg);
|
|
|
|
case SNDCTL_DSP_POST:
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_GETOSPACE: {
|
|
audio_buf_info info;
|
|
int i;
|
|
unsigned long flags;
|
|
struct hal2_codec *dac = &hal2->dac;
|
|
|
|
if (!(file->f_mode & FMODE_WRITE))
|
|
return -EINVAL;
|
|
info.fragments = 0;
|
|
spin_lock_irqsave(&dac->lock, flags);
|
|
for (i = 0; i < dac->desc_count; i++)
|
|
if (dac->desc[i].cnt == 0)
|
|
info.fragments++;
|
|
spin_unlock_irqrestore(&dac->lock, flags);
|
|
info.fragstotal = dac->desc_count;
|
|
info.fragsize = H2_BLOCK_SIZE;
|
|
info.bytes = info.fragsize * info.fragments;
|
|
|
|
return copy_to_user((void *)arg, &info, sizeof(info)) ? -EFAULT : 0;
|
|
}
|
|
|
|
case SNDCTL_DSP_GETISPACE: {
|
|
audio_buf_info info;
|
|
int i;
|
|
unsigned long flags;
|
|
struct hal2_codec *adc = &hal2->adc;
|
|
|
|
if (!(file->f_mode & FMODE_READ))
|
|
return -EINVAL;
|
|
info.fragments = 0;
|
|
info.bytes = 0;
|
|
spin_lock_irqsave(&adc->lock, flags);
|
|
for (i = 0; i < adc->desc_count; i++)
|
|
if (adc->desc[i].cnt > 0) {
|
|
info.fragments++;
|
|
info.bytes += adc->desc[i].cnt;
|
|
}
|
|
spin_unlock_irqrestore(&adc->lock, flags);
|
|
info.fragstotal = adc->desc_count;
|
|
info.fragsize = H2_BLOCK_SIZE;
|
|
|
|
return copy_to_user((void *)arg, &info, sizeof(info)) ? -EFAULT : 0;
|
|
}
|
|
|
|
case SNDCTL_DSP_NONBLOCK:
|
|
file->f_flags |= O_NONBLOCK;
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_GETBLKSIZE:
|
|
return put_user(H2_BLOCK_SIZE, (int *)arg);
|
|
|
|
case SNDCTL_DSP_SETFRAGMENT:
|
|
return 0;
|
|
|
|
case SOUND_PCM_READ_RATE:
|
|
val = -EINVAL;
|
|
if (file->f_mode & FMODE_READ)
|
|
val = hal2->adc.sample_rate;
|
|
if (file->f_mode & FMODE_WRITE)
|
|
val = hal2->dac.sample_rate;
|
|
return put_user(val, (int *)arg);
|
|
|
|
case SOUND_PCM_READ_CHANNELS:
|
|
val = -EINVAL;
|
|
if (file->f_mode & FMODE_READ)
|
|
val = hal2->adc.voices;
|
|
if (file->f_mode & FMODE_WRITE)
|
|
val = hal2->dac.voices;
|
|
return put_user(val, (int *)arg);
|
|
|
|
case SOUND_PCM_READ_BITS:
|
|
return put_user(16, (int *)arg);
|
|
}
|
|
|
|
return hal2_mixer_ioctl(hal2, cmd, arg);
|
|
}
|
|
|
|
static ssize_t hal2_read(struct file *file, char *buffer,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
ssize_t err;
|
|
struct hal2_card *hal2 = (struct hal2_card *) file->private_data;
|
|
struct hal2_codec *adc = &hal2->adc;
|
|
|
|
if (!count)
|
|
return 0;
|
|
if (mutex_lock_interruptible(&adc->sem))
|
|
return -EINTR;
|
|
if (file->f_flags & O_NONBLOCK) {
|
|
err = hal2_get_buffer(hal2, buffer, count);
|
|
err = err == 0 ? -EAGAIN : err;
|
|
} else {
|
|
do {
|
|
/* ~10% longer */
|
|
signed long timeout = 1000 * H2_BLOCK_SIZE *
|
|
2 * adc->voices * HZ / adc->sample_rate / 900;
|
|
unsigned long flags;
|
|
DECLARE_WAITQUEUE(wait, current);
|
|
ssize_t cnt = 0;
|
|
|
|
err = hal2_get_buffer(hal2, buffer, count);
|
|
if (err > 0) {
|
|
count -= err;
|
|
cnt += err;
|
|
buffer += err;
|
|
err = cnt;
|
|
}
|
|
if (count > 0 && err >= 0) {
|
|
add_wait_queue(&adc->dma_wait, &wait);
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
schedule_timeout(timeout);
|
|
spin_lock_irqsave(&adc->lock, flags);
|
|
if (!adc->desc[adc->tail].cnt)
|
|
err = -EAGAIN;
|
|
spin_unlock_irqrestore(&adc->lock, flags);
|
|
if (signal_pending(current))
|
|
err = -ERESTARTSYS;
|
|
remove_wait_queue(&adc->dma_wait, &wait);
|
|
if (err < 0) {
|
|
hal2_stop_adc(hal2);
|
|
hal2_reset_adc_pointer(hal2);
|
|
}
|
|
}
|
|
} while (count > 0 && err >= 0);
|
|
}
|
|
mutex_unlock(&adc->sem);
|
|
|
|
return err;
|
|
}
|
|
|
|
static ssize_t hal2_write(struct file *file, const char *buffer,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
ssize_t err;
|
|
char *buf = (char*) buffer;
|
|
struct hal2_card *hal2 = (struct hal2_card *) file->private_data;
|
|
struct hal2_codec *dac = &hal2->dac;
|
|
|
|
if (!count)
|
|
return 0;
|
|
if (mutex_lock_interruptible(&dac->sem))
|
|
return -EINTR;
|
|
if (file->f_flags & O_NONBLOCK) {
|
|
err = hal2_add_buffer(hal2, buf, count);
|
|
err = err == 0 ? -EAGAIN : err;
|
|
} else {
|
|
do {
|
|
/* ~10% longer */
|
|
signed long timeout = 1000 * H2_BLOCK_SIZE *
|
|
2 * dac->voices * HZ / dac->sample_rate / 900;
|
|
unsigned long flags;
|
|
DECLARE_WAITQUEUE(wait, current);
|
|
ssize_t cnt = 0;
|
|
|
|
err = hal2_add_buffer(hal2, buf, count);
|
|
if (err > 0) {
|
|
count -= err;
|
|
cnt += err;
|
|
buf += err;
|
|
err = cnt;
|
|
}
|
|
if (count > 0 && err >= 0) {
|
|
add_wait_queue(&dac->dma_wait, &wait);
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
schedule_timeout(timeout);
|
|
spin_lock_irqsave(&dac->lock, flags);
|
|
if (dac->desc[dac->head].cnt)
|
|
err = -EAGAIN;
|
|
spin_unlock_irqrestore(&dac->lock, flags);
|
|
if (signal_pending(current))
|
|
err = -ERESTARTSYS;
|
|
remove_wait_queue(&dac->dma_wait, &wait);
|
|
if (err < 0) {
|
|
hal2_stop_dac(hal2);
|
|
hal2_reset_dac_pointer(hal2);
|
|
}
|
|
}
|
|
} while (count > 0 && err >= 0);
|
|
}
|
|
mutex_unlock(&dac->sem);
|
|
|
|
return err;
|
|
}
|
|
|
|
static unsigned int hal2_poll(struct file *file, struct poll_table_struct *wait)
|
|
{
|
|
unsigned long flags;
|
|
unsigned int mask = 0;
|
|
struct hal2_card *hal2 = (struct hal2_card *) file->private_data;
|
|
|
|
if (file->f_mode & FMODE_READ) {
|
|
struct hal2_codec *adc = &hal2->adc;
|
|
|
|
poll_wait(file, &adc->dma_wait, wait);
|
|
spin_lock_irqsave(&adc->lock, flags);
|
|
if (adc->desc[adc->tail].cnt > 0)
|
|
mask |= POLLIN;
|
|
spin_unlock_irqrestore(&adc->lock, flags);
|
|
}
|
|
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
struct hal2_codec *dac = &hal2->dac;
|
|
|
|
poll_wait(file, &dac->dma_wait, wait);
|
|
spin_lock_irqsave(&dac->lock, flags);
|
|
if (dac->desc[dac->head].cnt == 0)
|
|
mask |= POLLOUT;
|
|
spin_unlock_irqrestore(&dac->lock, flags);
|
|
}
|
|
|
|
return mask;
|
|
}
|
|
|
|
static int hal2_open(struct inode *inode, struct file *file)
|
|
{
|
|
int err;
|
|
struct hal2_card *hal2 = hal2_dsp_find_card(iminor(inode));
|
|
|
|
if (!hal2)
|
|
return -ENODEV;
|
|
file->private_data = hal2;
|
|
if (file->f_mode & FMODE_READ) {
|
|
struct hal2_codec *adc = &hal2->adc;
|
|
|
|
if (adc->usecount)
|
|
return -EBUSY;
|
|
/* OSS spec wanted us to use 8 bit, 8 kHz mono by default,
|
|
* but HAL2 can't do 8bit audio */
|
|
adc->format = AFMT_S16_BE;
|
|
adc->voices = 1;
|
|
adc->sample_rate = hal2_compute_rate(adc, 8000);
|
|
hal2_set_adc_rate(hal2);
|
|
err = hal2_alloc_adc_dmabuf(adc);
|
|
if (err)
|
|
return err;
|
|
hal2_setup_adc(hal2);
|
|
adc->usecount++;
|
|
}
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
struct hal2_codec *dac = &hal2->dac;
|
|
|
|
if (dac->usecount)
|
|
return -EBUSY;
|
|
dac->format = AFMT_S16_BE;
|
|
dac->voices = 1;
|
|
dac->sample_rate = hal2_compute_rate(dac, 8000);
|
|
hal2_set_dac_rate(hal2);
|
|
err = hal2_alloc_dac_dmabuf(dac);
|
|
if (err)
|
|
return err;
|
|
hal2_setup_dac(hal2);
|
|
dac->usecount++;
|
|
}
|
|
|
|
return nonseekable_open(inode, file);
|
|
}
|
|
|
|
static int hal2_release(struct inode *inode, struct file *file)
|
|
{
|
|
struct hal2_card *hal2 = (struct hal2_card *) file->private_data;
|
|
|
|
if (file->f_mode & FMODE_READ) {
|
|
struct hal2_codec *adc = &hal2->adc;
|
|
|
|
mutex_lock(&adc->sem);
|
|
hal2_stop_adc(hal2);
|
|
hal2_free_adc_dmabuf(adc);
|
|
adc->usecount--;
|
|
mutex_unlock(&adc->sem);
|
|
}
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
struct hal2_codec *dac = &hal2->dac;
|
|
|
|
mutex_lock(&dac->sem);
|
|
hal2_sync_dac(hal2);
|
|
hal2_free_dac_dmabuf(dac);
|
|
dac->usecount--;
|
|
mutex_unlock(&dac->sem);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct file_operations hal2_audio_fops = {
|
|
.owner = THIS_MODULE,
|
|
.llseek = no_llseek,
|
|
.read = hal2_read,
|
|
.write = hal2_write,
|
|
.poll = hal2_poll,
|
|
.ioctl = hal2_ioctl,
|
|
.open = hal2_open,
|
|
.release = hal2_release,
|
|
};
|
|
|
|
static const struct file_operations hal2_mixer_fops = {
|
|
.owner = THIS_MODULE,
|
|
.llseek = no_llseek,
|
|
.ioctl = hal2_ioctl_mixdev,
|
|
.open = hal2_open_mixdev,
|
|
.release = hal2_release_mixdev,
|
|
};
|
|
|
|
static void hal2_init_codec(struct hal2_codec *codec, struct hpc3_regs *hpc3,
|
|
int index)
|
|
{
|
|
codec->pbus.pbusnr = index;
|
|
codec->pbus.pbus = &hpc3->pbdma[index];
|
|
init_waitqueue_head(&codec->dma_wait);
|
|
mutex_init(&codec->sem);
|
|
spin_lock_init(&codec->lock);
|
|
}
|
|
|
|
static int hal2_detect(struct hal2_card *hal2)
|
|
{
|
|
unsigned short board, major, minor;
|
|
unsigned short rev;
|
|
|
|
/* reset HAL2 */
|
|
hal2_isr_write(hal2, 0);
|
|
/* release reset */
|
|
hal2_isr_write(hal2, H2_ISR_GLOBAL_RESET_N | H2_ISR_CODEC_RESET_N);
|
|
|
|
hal2_i_write16(hal2, H2I_RELAY_C, H2I_RELAY_C_STATE);
|
|
if ((rev = hal2_rev_look(hal2)) & H2_REV_AUDIO_PRESENT)
|
|
return -ENODEV;
|
|
|
|
board = (rev & H2_REV_BOARD_M) >> 12;
|
|
major = (rev & H2_REV_MAJOR_CHIP_M) >> 4;
|
|
minor = (rev & H2_REV_MINOR_CHIP_M);
|
|
|
|
printk(KERN_INFO "SGI HAL2 revision %i.%i.%i\n",
|
|
board, major, minor);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hal2_init_card(struct hal2_card **phal2, struct hpc3_regs *hpc3)
|
|
{
|
|
int ret = 0;
|
|
struct hal2_card *hal2;
|
|
|
|
hal2 = kzalloc(sizeof(struct hal2_card), GFP_KERNEL);
|
|
if (!hal2)
|
|
return -ENOMEM;
|
|
|
|
hal2->ctl_regs = (struct hal2_ctl_regs *)hpc3->pbus_extregs[0];
|
|
hal2->aes_regs = (struct hal2_aes_regs *)hpc3->pbus_extregs[1];
|
|
hal2->vol_regs = (struct hal2_vol_regs *)hpc3->pbus_extregs[2];
|
|
hal2->syn_regs = (struct hal2_syn_regs *)hpc3->pbus_extregs[3];
|
|
|
|
if (hal2_detect(hal2) < 0) {
|
|
ret = -ENODEV;
|
|
goto free_card;
|
|
}
|
|
|
|
hal2_init_codec(&hal2->dac, hpc3, 0);
|
|
hal2_init_codec(&hal2->adc, hpc3, 1);
|
|
|
|
/*
|
|
* All DMA channel interfaces in HAL2 are designed to operate with
|
|
* PBUS programmed for 2 cycles in D3, 2 cycles in D4 and 2 cycles
|
|
* in D5. HAL2 is a 16-bit device which can accept both big and little
|
|
* endian format. It assumes that even address bytes are on high
|
|
* portion of PBUS (15:8) and assumes that HPC3 is programmed to
|
|
* accept a live (unsynchronized) version of P_DREQ_N from HAL2.
|
|
*/
|
|
#define HAL2_PBUS_DMACFG ((0 << HPC3_DMACFG_D3R_SHIFT) | \
|
|
(2 << HPC3_DMACFG_D4R_SHIFT) | \
|
|
(2 << HPC3_DMACFG_D5R_SHIFT) | \
|
|
(0 << HPC3_DMACFG_D3W_SHIFT) | \
|
|
(2 << HPC3_DMACFG_D4W_SHIFT) | \
|
|
(2 << HPC3_DMACFG_D5W_SHIFT) | \
|
|
HPC3_DMACFG_DS16 | \
|
|
HPC3_DMACFG_EVENHI | \
|
|
HPC3_DMACFG_RTIME | \
|
|
(8 << HPC3_DMACFG_BURST_SHIFT) | \
|
|
HPC3_DMACFG_DRQLIVE)
|
|
/*
|
|
* Ignore what's mentioned in the specification and write value which
|
|
* works in The Real World (TM)
|
|
*/
|
|
hpc3->pbus_dmacfg[hal2->dac.pbus.pbusnr][0] = 0x8208844;
|
|
hpc3->pbus_dmacfg[hal2->adc.pbus.pbusnr][0] = 0x8208844;
|
|
|
|
if (request_irq(SGI_HPCDMA_IRQ, hal2_interrupt, IRQF_SHARED,
|
|
hal2str, hal2)) {
|
|
printk(KERN_ERR "HAL2: Can't get irq %d\n", SGI_HPCDMA_IRQ);
|
|
ret = -EAGAIN;
|
|
goto free_card;
|
|
}
|
|
|
|
hal2->dev_dsp = register_sound_dsp(&hal2_audio_fops, -1);
|
|
if (hal2->dev_dsp < 0) {
|
|
ret = hal2->dev_dsp;
|
|
goto free_irq;
|
|
}
|
|
|
|
hal2->dev_mixer = register_sound_mixer(&hal2_mixer_fops, -1);
|
|
if (hal2->dev_mixer < 0) {
|
|
ret = hal2->dev_mixer;
|
|
goto unregister_dsp;
|
|
}
|
|
|
|
hal2_init_mixer(hal2);
|
|
|
|
*phal2 = hal2;
|
|
return 0;
|
|
unregister_dsp:
|
|
unregister_sound_dsp(hal2->dev_dsp);
|
|
free_irq:
|
|
free_irq(SGI_HPCDMA_IRQ, hal2);
|
|
free_card:
|
|
kfree(hal2);
|
|
|
|
return ret;
|
|
}
|
|
|
|
extern void (*indy_volume_button)(int);
|
|
|
|
/*
|
|
* Assuming only one HAL2 card. Mail me if you ever meet machine with
|
|
* more than one.
|
|
*/
|
|
static int __init init_hal2(void)
|
|
{
|
|
int i, error;
|
|
|
|
for (i = 0; i < MAXCARDS; i++)
|
|
hal2_card[i] = NULL;
|
|
|
|
error = hal2_init_card(&hal2_card[0], hpc3c0);
|
|
|
|
/* let Indy's volume buttons work */
|
|
if (!error && !ip22_is_fullhouse())
|
|
indy_volume_button = hal2_volume_control;
|
|
|
|
return error;
|
|
|
|
}
|
|
|
|
static void __exit exit_hal2(void)
|
|
{
|
|
int i;
|
|
|
|
/* unregister volume butons callback function */
|
|
indy_volume_button = NULL;
|
|
|
|
for (i = 0; i < MAXCARDS; i++)
|
|
if (hal2_card[i]) {
|
|
free_irq(SGI_HPCDMA_IRQ, hal2_card[i]);
|
|
unregister_sound_dsp(hal2_card[i]->dev_dsp);
|
|
unregister_sound_mixer(hal2_card[i]->dev_mixer);
|
|
kfree(hal2_card[i]);
|
|
}
|
|
}
|
|
|
|
module_init(init_hal2);
|
|
module_exit(exit_hal2);
|
|
|
|
MODULE_DESCRIPTION("OSS compatible driver for SGI HAL2 audio");
|
|
MODULE_AUTHOR("Ladislav Michl");
|
|
MODULE_LICENSE("GPL");
|