075affcbe0
From the perspective of most users of recent systems, disabling Host Protected Area (HPA) can break vendor RAID formats, GPT partitions and risks corrupting firmware or overwriting vendor system recovery tools. Unfortunately the original (kernels < 2.6.30) behavior (unconditionally disabling HPA and using full disk capacity) was introduced at the time when the main use of HPA was to make the drive look small enough for the BIOS to allow the system to boot with large capacity drives. Thus to allow the maximum compatibility with the existing setups (using HPA and partitioned with HPA disabled) we automically disable HPA if any partitions overlapping HPA are detected. Additionally HPA can also be disabled using the "nohpa" module parameter (i.e. "ide_core.nohpa=0.0" to disable HPA on /dev/hda). v2: Fix ->resume HPA support. While at it: - remove stale "idebus=" entry from Documentation/kernel-parameters.txt Cc: Robert Hancock <hancockrwd@gmail.com> Cc: Frans Pop <elendil@planet.nl> Cc: "Andries E. Brouwer" <Andries.Brouwer@cwi.nl> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> [patch description was based on input from Alan Cox and Frans Pop] Emphatically-Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
803 lines
20 KiB
C
803 lines
20 KiB
C
/*
|
|
* Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
|
|
* Copyright (C) 1998-2002 Linux ATA Development
|
|
* Andre Hedrick <andre@linux-ide.org>
|
|
* Copyright (C) 2003 Red Hat
|
|
* Copyright (C) 2003-2005, 2007 Bartlomiej Zolnierkiewicz
|
|
*/
|
|
|
|
/*
|
|
* Mostly written by Mark Lord <mlord@pobox.com>
|
|
* and Gadi Oxman <gadio@netvision.net.il>
|
|
* and Andre Hedrick <andre@linux-ide.org>
|
|
*
|
|
* This is the IDE/ATA disk driver, as evolved from hd.c and ide.c.
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/string.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/major.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/genhd.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/ide.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/io.h>
|
|
#include <asm/div64.h>
|
|
|
|
#include "ide-disk.h"
|
|
|
|
static const u8 ide_rw_cmds[] = {
|
|
ATA_CMD_READ_MULTI,
|
|
ATA_CMD_WRITE_MULTI,
|
|
ATA_CMD_READ_MULTI_EXT,
|
|
ATA_CMD_WRITE_MULTI_EXT,
|
|
ATA_CMD_PIO_READ,
|
|
ATA_CMD_PIO_WRITE,
|
|
ATA_CMD_PIO_READ_EXT,
|
|
ATA_CMD_PIO_WRITE_EXT,
|
|
ATA_CMD_READ,
|
|
ATA_CMD_WRITE,
|
|
ATA_CMD_READ_EXT,
|
|
ATA_CMD_WRITE_EXT,
|
|
};
|
|
|
|
static void ide_tf_set_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 dma)
|
|
{
|
|
u8 index, lba48, write;
|
|
|
|
lba48 = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 2 : 0;
|
|
write = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 1 : 0;
|
|
|
|
if (dma) {
|
|
cmd->protocol = ATA_PROT_DMA;
|
|
index = 8;
|
|
} else {
|
|
cmd->protocol = ATA_PROT_PIO;
|
|
if (drive->mult_count) {
|
|
cmd->tf_flags |= IDE_TFLAG_MULTI_PIO;
|
|
index = 0;
|
|
} else
|
|
index = 4;
|
|
}
|
|
|
|
cmd->tf.command = ide_rw_cmds[index + lba48 + write];
|
|
}
|
|
|
|
/*
|
|
* __ide_do_rw_disk() issues READ and WRITE commands to a disk,
|
|
* using LBA if supported, or CHS otherwise, to address sectors.
|
|
*/
|
|
static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
|
|
sector_t block)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
u16 nsectors = (u16)rq->nr_sectors;
|
|
u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48);
|
|
u8 dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
|
|
struct ide_cmd cmd;
|
|
struct ide_taskfile *tf = &cmd.tf;
|
|
ide_startstop_t rc;
|
|
|
|
if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && lba48 && dma) {
|
|
if (block + rq->nr_sectors > 1ULL << 28)
|
|
dma = 0;
|
|
else
|
|
lba48 = 0;
|
|
}
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
|
|
cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
|
|
|
|
if (drive->dev_flags & IDE_DFLAG_LBA) {
|
|
if (lba48) {
|
|
pr_debug("%s: LBA=0x%012llx\n", drive->name,
|
|
(unsigned long long)block);
|
|
|
|
tf->nsect = nsectors & 0xff;
|
|
tf->lbal = (u8) block;
|
|
tf->lbam = (u8)(block >> 8);
|
|
tf->lbah = (u8)(block >> 16);
|
|
tf->device = ATA_LBA;
|
|
|
|
tf = &cmd.hob;
|
|
tf->nsect = (nsectors >> 8) & 0xff;
|
|
tf->lbal = (u8)(block >> 24);
|
|
if (sizeof(block) != 4) {
|
|
tf->lbam = (u8)((u64)block >> 32);
|
|
tf->lbah = (u8)((u64)block >> 40);
|
|
}
|
|
|
|
cmd.valid.out.hob = IDE_VALID_OUT_HOB;
|
|
cmd.valid.in.hob = IDE_VALID_IN_HOB;
|
|
cmd.tf_flags |= IDE_TFLAG_LBA48;
|
|
} else {
|
|
tf->nsect = nsectors & 0xff;
|
|
tf->lbal = block;
|
|
tf->lbam = block >>= 8;
|
|
tf->lbah = block >>= 8;
|
|
tf->device = ((block >> 8) & 0xf) | ATA_LBA;
|
|
}
|
|
} else {
|
|
unsigned int sect, head, cyl, track;
|
|
|
|
track = (int)block / drive->sect;
|
|
sect = (int)block % drive->sect + 1;
|
|
head = track % drive->head;
|
|
cyl = track / drive->head;
|
|
|
|
pr_debug("%s: CHS=%u/%u/%u\n", drive->name, cyl, head, sect);
|
|
|
|
tf->nsect = nsectors & 0xff;
|
|
tf->lbal = sect;
|
|
tf->lbam = cyl;
|
|
tf->lbah = cyl >> 8;
|
|
tf->device = head;
|
|
}
|
|
|
|
cmd.tf_flags |= IDE_TFLAG_FS;
|
|
|
|
if (rq_data_dir(rq))
|
|
cmd.tf_flags |= IDE_TFLAG_WRITE;
|
|
|
|
ide_tf_set_cmd(drive, &cmd, dma);
|
|
cmd.rq = rq;
|
|
|
|
if (dma == 0) {
|
|
ide_init_sg_cmd(&cmd, nsectors << 9);
|
|
ide_map_sg(drive, &cmd);
|
|
}
|
|
|
|
rc = do_rw_taskfile(drive, &cmd);
|
|
|
|
if (rc == ide_stopped && dma) {
|
|
/* fallback to PIO */
|
|
cmd.tf_flags |= IDE_TFLAG_DMA_PIO_FALLBACK;
|
|
ide_tf_set_cmd(drive, &cmd, 0);
|
|
ide_init_sg_cmd(&cmd, nsectors << 9);
|
|
rc = do_rw_taskfile(drive, &cmd);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* 268435455 == 137439 MB or 28bit limit
|
|
* 320173056 == 163929 MB or 48bit addressing
|
|
* 1073741822 == 549756 MB or 48bit addressing fake drive
|
|
*/
|
|
|
|
static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
|
|
sector_t block)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
|
|
BUG_ON(drive->dev_flags & IDE_DFLAG_BLOCKED);
|
|
|
|
if (!blk_fs_request(rq)) {
|
|
blk_dump_rq_flags(rq, "ide_do_rw_disk - bad command");
|
|
if (rq->errors == 0)
|
|
rq->errors = -EIO;
|
|
ide_complete_rq(drive, -EIO, ide_rq_bytes(rq));
|
|
return ide_stopped;
|
|
}
|
|
|
|
ledtrig_ide_activity();
|
|
|
|
pr_debug("%s: %sing: block=%llu, sectors=%lu, buffer=0x%08lx\n",
|
|
drive->name, rq_data_dir(rq) == READ ? "read" : "writ",
|
|
(unsigned long long)block, rq->nr_sectors,
|
|
(unsigned long)rq->buffer);
|
|
|
|
if (hwif->rw_disk)
|
|
hwif->rw_disk(drive, rq);
|
|
|
|
return __ide_do_rw_disk(drive, rq, block);
|
|
}
|
|
|
|
/*
|
|
* Queries for true maximum capacity of the drive.
|
|
* Returns maximum LBA address (> 0) of the drive, 0 if failed.
|
|
*/
|
|
static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48)
|
|
{
|
|
struct ide_cmd cmd;
|
|
struct ide_taskfile *tf = &cmd.tf;
|
|
u64 addr = 0;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
if (lba48)
|
|
tf->command = ATA_CMD_READ_NATIVE_MAX_EXT;
|
|
else
|
|
tf->command = ATA_CMD_READ_NATIVE_MAX;
|
|
tf->device = ATA_LBA;
|
|
|
|
cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
|
|
cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
|
|
if (lba48) {
|
|
cmd.valid.out.hob = IDE_VALID_OUT_HOB;
|
|
cmd.valid.in.hob = IDE_VALID_IN_HOB;
|
|
cmd.tf_flags = IDE_TFLAG_LBA48;
|
|
}
|
|
|
|
ide_no_data_taskfile(drive, &cmd);
|
|
|
|
/* if OK, compute maximum address value */
|
|
if (!(tf->status & ATA_ERR))
|
|
addr = ide_get_lba_addr(&cmd, lba48) + 1;
|
|
|
|
return addr;
|
|
}
|
|
|
|
/*
|
|
* Sets maximum virtual LBA address of the drive.
|
|
* Returns new maximum virtual LBA address (> 0) or 0 on failure.
|
|
*/
|
|
static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48)
|
|
{
|
|
struct ide_cmd cmd;
|
|
struct ide_taskfile *tf = &cmd.tf;
|
|
u64 addr_set = 0;
|
|
|
|
addr_req--;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
tf->lbal = (addr_req >> 0) & 0xff;
|
|
tf->lbam = (addr_req >>= 8) & 0xff;
|
|
tf->lbah = (addr_req >>= 8) & 0xff;
|
|
if (lba48) {
|
|
cmd.hob.lbal = (addr_req >>= 8) & 0xff;
|
|
cmd.hob.lbam = (addr_req >>= 8) & 0xff;
|
|
cmd.hob.lbah = (addr_req >>= 8) & 0xff;
|
|
tf->command = ATA_CMD_SET_MAX_EXT;
|
|
} else {
|
|
tf->device = (addr_req >>= 8) & 0x0f;
|
|
tf->command = ATA_CMD_SET_MAX;
|
|
}
|
|
tf->device |= ATA_LBA;
|
|
|
|
cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
|
|
cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
|
|
if (lba48) {
|
|
cmd.valid.out.hob = IDE_VALID_OUT_HOB;
|
|
cmd.valid.in.hob = IDE_VALID_IN_HOB;
|
|
cmd.tf_flags = IDE_TFLAG_LBA48;
|
|
}
|
|
|
|
ide_no_data_taskfile(drive, &cmd);
|
|
|
|
/* if OK, compute maximum address value */
|
|
if (!(tf->status & ATA_ERR))
|
|
addr_set = ide_get_lba_addr(&cmd, lba48) + 1;
|
|
|
|
return addr_set;
|
|
}
|
|
|
|
static unsigned long long sectors_to_MB(unsigned long long n)
|
|
{
|
|
n <<= 9; /* make it bytes */
|
|
do_div(n, 1000000); /* make it MB */
|
|
return n;
|
|
}
|
|
|
|
/*
|
|
* Some disks report total number of sectors instead of
|
|
* maximum sector address. We list them here.
|
|
*/
|
|
static const struct drive_list_entry hpa_list[] = {
|
|
{ "ST340823A", NULL },
|
|
{ "ST320413A", NULL },
|
|
{ "ST310211A", NULL },
|
|
{ NULL, NULL }
|
|
};
|
|
|
|
static u64 ide_disk_hpa_get_native_capacity(ide_drive_t *drive, int lba48)
|
|
{
|
|
u64 capacity, set_max;
|
|
|
|
capacity = drive->capacity64;
|
|
set_max = idedisk_read_native_max_address(drive, lba48);
|
|
|
|
if (ide_in_drive_list(drive->id, hpa_list)) {
|
|
/*
|
|
* Since we are inclusive wrt to firmware revisions do this
|
|
* extra check and apply the workaround only when needed.
|
|
*/
|
|
if (set_max == capacity + 1)
|
|
set_max--;
|
|
}
|
|
|
|
return set_max;
|
|
}
|
|
|
|
static u64 ide_disk_hpa_set_capacity(ide_drive_t *drive, u64 set_max, int lba48)
|
|
{
|
|
set_max = idedisk_set_max_address(drive, set_max, lba48);
|
|
if (set_max)
|
|
drive->capacity64 = set_max;
|
|
|
|
return set_max;
|
|
}
|
|
|
|
static void idedisk_check_hpa(ide_drive_t *drive)
|
|
{
|
|
u64 capacity, set_max;
|
|
int lba48 = ata_id_lba48_enabled(drive->id);
|
|
|
|
capacity = drive->capacity64;
|
|
set_max = ide_disk_hpa_get_native_capacity(drive, lba48);
|
|
|
|
if (set_max <= capacity)
|
|
return;
|
|
|
|
drive->probed_capacity = set_max;
|
|
|
|
printk(KERN_INFO "%s: Host Protected Area detected.\n"
|
|
"\tcurrent capacity is %llu sectors (%llu MB)\n"
|
|
"\tnative capacity is %llu sectors (%llu MB)\n",
|
|
drive->name,
|
|
capacity, sectors_to_MB(capacity),
|
|
set_max, sectors_to_MB(set_max));
|
|
|
|
if ((drive->dev_flags & IDE_DFLAG_NOHPA) == 0)
|
|
return;
|
|
|
|
set_max = ide_disk_hpa_set_capacity(drive, set_max, lba48);
|
|
if (set_max)
|
|
printk(KERN_INFO "%s: Host Protected Area disabled.\n",
|
|
drive->name);
|
|
}
|
|
|
|
static int ide_disk_get_capacity(ide_drive_t *drive)
|
|
{
|
|
u16 *id = drive->id;
|
|
int lba;
|
|
|
|
if (ata_id_lba48_enabled(id)) {
|
|
/* drive speaks 48-bit LBA */
|
|
lba = 1;
|
|
drive->capacity64 = ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
|
|
} else if (ata_id_has_lba(id) && ata_id_is_lba_capacity_ok(id)) {
|
|
/* drive speaks 28-bit LBA */
|
|
lba = 1;
|
|
drive->capacity64 = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
|
|
} else {
|
|
/* drive speaks boring old 28-bit CHS */
|
|
lba = 0;
|
|
drive->capacity64 = drive->cyl * drive->head * drive->sect;
|
|
}
|
|
|
|
drive->probed_capacity = drive->capacity64;
|
|
|
|
if (lba) {
|
|
drive->dev_flags |= IDE_DFLAG_LBA;
|
|
|
|
/*
|
|
* If this device supports the Host Protected Area feature set,
|
|
* then we may need to change our opinion about its capacity.
|
|
*/
|
|
if (ata_id_hpa_enabled(id))
|
|
idedisk_check_hpa(drive);
|
|
}
|
|
|
|
/* limit drive capacity to 137GB if LBA48 cannot be used */
|
|
if ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 &&
|
|
drive->capacity64 > 1ULL << 28) {
|
|
printk(KERN_WARNING "%s: cannot use LBA48 - full capacity "
|
|
"%llu sectors (%llu MB)\n",
|
|
drive->name, (unsigned long long)drive->capacity64,
|
|
sectors_to_MB(drive->capacity64));
|
|
drive->probed_capacity = drive->capacity64 = 1ULL << 28;
|
|
}
|
|
|
|
if ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) &&
|
|
(drive->dev_flags & IDE_DFLAG_LBA48)) {
|
|
if (drive->capacity64 > 1ULL << 28) {
|
|
printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode"
|
|
" will be used for accessing sectors "
|
|
"> %u\n", drive->name, 1 << 28);
|
|
} else
|
|
drive->dev_flags &= ~IDE_DFLAG_LBA48;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u64 ide_disk_set_capacity(ide_drive_t *drive, u64 capacity)
|
|
{
|
|
u64 set = min(capacity, drive->probed_capacity);
|
|
u16 *id = drive->id;
|
|
int lba48 = ata_id_lba48_enabled(id);
|
|
|
|
if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 ||
|
|
ata_id_hpa_enabled(id) == 0)
|
|
goto out;
|
|
|
|
/*
|
|
* according to the spec the SET MAX ADDRESS command shall be
|
|
* immediately preceded by a READ NATIVE MAX ADDRESS command
|
|
*/
|
|
capacity = ide_disk_hpa_get_native_capacity(drive, lba48);
|
|
if (capacity == 0)
|
|
goto out;
|
|
|
|
set = ide_disk_hpa_set_capacity(drive, set, lba48);
|
|
if (set) {
|
|
/* needed for ->resume to disable HPA */
|
|
drive->dev_flags |= IDE_DFLAG_NOHPA;
|
|
return set;
|
|
}
|
|
out:
|
|
return drive->capacity64;
|
|
}
|
|
|
|
static void idedisk_prepare_flush(struct request_queue *q, struct request *rq)
|
|
{
|
|
ide_drive_t *drive = q->queuedata;
|
|
struct ide_cmd *cmd = kmalloc(sizeof(*cmd), GFP_ATOMIC);
|
|
|
|
/* FIXME: map struct ide_taskfile on rq->cmd[] */
|
|
BUG_ON(cmd == NULL);
|
|
|
|
memset(cmd, 0, sizeof(*cmd));
|
|
if (ata_id_flush_ext_enabled(drive->id) &&
|
|
(drive->capacity64 >= (1UL << 28)))
|
|
cmd->tf.command = ATA_CMD_FLUSH_EXT;
|
|
else
|
|
cmd->tf.command = ATA_CMD_FLUSH;
|
|
cmd->valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
|
|
cmd->tf_flags = IDE_TFLAG_DYN;
|
|
cmd->protocol = ATA_PROT_NODATA;
|
|
|
|
rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
|
|
rq->cmd_flags |= REQ_SOFTBARRIER;
|
|
rq->special = cmd;
|
|
}
|
|
|
|
ide_devset_get(multcount, mult_count);
|
|
|
|
/*
|
|
* This is tightly woven into the driver->do_special can not touch.
|
|
* DON'T do it again until a total personality rewrite is committed.
|
|
*/
|
|
static int set_multcount(ide_drive_t *drive, int arg)
|
|
{
|
|
struct request *rq;
|
|
int error;
|
|
|
|
if (arg < 0 || arg > (drive->id[ATA_ID_MAX_MULTSECT] & 0xff))
|
|
return -EINVAL;
|
|
|
|
if (drive->special.b.set_multmode)
|
|
return -EBUSY;
|
|
|
|
rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
|
|
rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
|
|
|
|
drive->mult_req = arg;
|
|
drive->special.b.set_multmode = 1;
|
|
error = blk_execute_rq(drive->queue, NULL, rq, 0);
|
|
blk_put_request(rq);
|
|
|
|
return (drive->mult_count == arg) ? 0 : -EIO;
|
|
}
|
|
|
|
ide_devset_get_flag(nowerr, IDE_DFLAG_NOWERR);
|
|
|
|
static int set_nowerr(ide_drive_t *drive, int arg)
|
|
{
|
|
if (arg < 0 || arg > 1)
|
|
return -EINVAL;
|
|
|
|
if (arg)
|
|
drive->dev_flags |= IDE_DFLAG_NOWERR;
|
|
else
|
|
drive->dev_flags &= ~IDE_DFLAG_NOWERR;
|
|
|
|
drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ide_do_setfeature(ide_drive_t *drive, u8 feature, u8 nsect)
|
|
{
|
|
struct ide_cmd cmd;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
cmd.tf.feature = feature;
|
|
cmd.tf.nsect = nsect;
|
|
cmd.tf.command = ATA_CMD_SET_FEATURES;
|
|
cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
|
|
cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
|
|
|
|
return ide_no_data_taskfile(drive, &cmd);
|
|
}
|
|
|
|
static void update_ordered(ide_drive_t *drive)
|
|
{
|
|
u16 *id = drive->id;
|
|
unsigned ordered = QUEUE_ORDERED_NONE;
|
|
prepare_flush_fn *prep_fn = NULL;
|
|
|
|
if (drive->dev_flags & IDE_DFLAG_WCACHE) {
|
|
unsigned long long capacity;
|
|
int barrier;
|
|
/*
|
|
* We must avoid issuing commands a drive does not
|
|
* understand or we may crash it. We check flush cache
|
|
* is supported. We also check we have the LBA48 flush
|
|
* cache if the drive capacity is too large. By this
|
|
* time we have trimmed the drive capacity if LBA48 is
|
|
* not available so we don't need to recheck that.
|
|
*/
|
|
capacity = ide_gd_capacity(drive);
|
|
barrier = ata_id_flush_enabled(id) &&
|
|
(drive->dev_flags & IDE_DFLAG_NOFLUSH) == 0 &&
|
|
((drive->dev_flags & IDE_DFLAG_LBA48) == 0 ||
|
|
capacity <= (1ULL << 28) ||
|
|
ata_id_flush_ext_enabled(id));
|
|
|
|
printk(KERN_INFO "%s: cache flushes %ssupported\n",
|
|
drive->name, barrier ? "" : "not ");
|
|
|
|
if (barrier) {
|
|
ordered = QUEUE_ORDERED_DRAIN_FLUSH;
|
|
prep_fn = idedisk_prepare_flush;
|
|
}
|
|
} else
|
|
ordered = QUEUE_ORDERED_DRAIN;
|
|
|
|
blk_queue_ordered(drive->queue, ordered, prep_fn);
|
|
}
|
|
|
|
ide_devset_get_flag(wcache, IDE_DFLAG_WCACHE);
|
|
|
|
static int set_wcache(ide_drive_t *drive, int arg)
|
|
{
|
|
int err = 1;
|
|
|
|
if (arg < 0 || arg > 1)
|
|
return -EINVAL;
|
|
|
|
if (ata_id_flush_enabled(drive->id)) {
|
|
err = ide_do_setfeature(drive,
|
|
arg ? SETFEATURES_WC_ON : SETFEATURES_WC_OFF, 0);
|
|
if (err == 0) {
|
|
if (arg)
|
|
drive->dev_flags |= IDE_DFLAG_WCACHE;
|
|
else
|
|
drive->dev_flags &= ~IDE_DFLAG_WCACHE;
|
|
}
|
|
}
|
|
|
|
update_ordered(drive);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int do_idedisk_flushcache(ide_drive_t *drive)
|
|
{
|
|
struct ide_cmd cmd;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
if (ata_id_flush_ext_enabled(drive->id))
|
|
cmd.tf.command = ATA_CMD_FLUSH_EXT;
|
|
else
|
|
cmd.tf.command = ATA_CMD_FLUSH;
|
|
cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
|
|
cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
|
|
|
|
return ide_no_data_taskfile(drive, &cmd);
|
|
}
|
|
|
|
ide_devset_get(acoustic, acoustic);
|
|
|
|
static int set_acoustic(ide_drive_t *drive, int arg)
|
|
{
|
|
if (arg < 0 || arg > 254)
|
|
return -EINVAL;
|
|
|
|
ide_do_setfeature(drive,
|
|
arg ? SETFEATURES_AAM_ON : SETFEATURES_AAM_OFF, arg);
|
|
|
|
drive->acoustic = arg;
|
|
|
|
return 0;
|
|
}
|
|
|
|
ide_devset_get_flag(addressing, IDE_DFLAG_LBA48);
|
|
|
|
/*
|
|
* drive->addressing:
|
|
* 0: 28-bit
|
|
* 1: 48-bit
|
|
* 2: 48-bit capable doing 28-bit
|
|
*/
|
|
static int set_addressing(ide_drive_t *drive, int arg)
|
|
{
|
|
if (arg < 0 || arg > 2)
|
|
return -EINVAL;
|
|
|
|
if (arg && ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48) ||
|
|
ata_id_lba48_enabled(drive->id) == 0))
|
|
return -EIO;
|
|
|
|
if (arg == 2)
|
|
arg = 0;
|
|
|
|
if (arg)
|
|
drive->dev_flags |= IDE_DFLAG_LBA48;
|
|
else
|
|
drive->dev_flags &= ~IDE_DFLAG_LBA48;
|
|
|
|
return 0;
|
|
}
|
|
|
|
ide_ext_devset_rw(acoustic, acoustic);
|
|
ide_ext_devset_rw(address, addressing);
|
|
ide_ext_devset_rw(multcount, multcount);
|
|
ide_ext_devset_rw(wcache, wcache);
|
|
|
|
ide_ext_devset_rw_sync(nowerr, nowerr);
|
|
|
|
static int ide_disk_check(ide_drive_t *drive, const char *s)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
static void ide_disk_setup(ide_drive_t *drive)
|
|
{
|
|
struct ide_disk_obj *idkp = drive->driver_data;
|
|
struct request_queue *q = drive->queue;
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
u16 *id = drive->id;
|
|
char *m = (char *)&id[ATA_ID_PROD];
|
|
unsigned long long capacity;
|
|
|
|
ide_proc_register_driver(drive, idkp->driver);
|
|
|
|
if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0)
|
|
return;
|
|
|
|
if (drive->dev_flags & IDE_DFLAG_REMOVABLE) {
|
|
/*
|
|
* Removable disks (eg. SYQUEST); ignore 'WD' drives
|
|
*/
|
|
if (m[0] != 'W' || m[1] != 'D')
|
|
drive->dev_flags |= IDE_DFLAG_DOORLOCKING;
|
|
}
|
|
|
|
(void)set_addressing(drive, 1);
|
|
|
|
if (drive->dev_flags & IDE_DFLAG_LBA48) {
|
|
int max_s = 2048;
|
|
|
|
if (max_s > hwif->rqsize)
|
|
max_s = hwif->rqsize;
|
|
|
|
blk_queue_max_sectors(q, max_s);
|
|
}
|
|
|
|
printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name,
|
|
q->max_sectors / 2);
|
|
|
|
if (ata_id_is_ssd(id))
|
|
queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
|
|
|
|
/* calculate drive capacity, and select LBA if possible */
|
|
ide_disk_get_capacity(drive);
|
|
|
|
/*
|
|
* if possible, give fdisk access to more of the drive,
|
|
* by correcting bios_cyls:
|
|
*/
|
|
capacity = ide_gd_capacity(drive);
|
|
|
|
if ((drive->dev_flags & IDE_DFLAG_FORCED_GEOM) == 0) {
|
|
if (ata_id_lba48_enabled(drive->id)) {
|
|
/* compatibility */
|
|
drive->bios_sect = 63;
|
|
drive->bios_head = 255;
|
|
}
|
|
|
|
if (drive->bios_sect && drive->bios_head) {
|
|
unsigned int cap0 = capacity; /* truncate to 32 bits */
|
|
unsigned int cylsz, cyl;
|
|
|
|
if (cap0 != capacity)
|
|
drive->bios_cyl = 65535;
|
|
else {
|
|
cylsz = drive->bios_sect * drive->bios_head;
|
|
cyl = cap0 / cylsz;
|
|
if (cyl > 65535)
|
|
cyl = 65535;
|
|
if (cyl > drive->bios_cyl)
|
|
drive->bios_cyl = cyl;
|
|
}
|
|
}
|
|
}
|
|
printk(KERN_INFO "%s: %llu sectors (%llu MB)",
|
|
drive->name, capacity, sectors_to_MB(capacity));
|
|
|
|
/* Only print cache size when it was specified */
|
|
if (id[ATA_ID_BUF_SIZE])
|
|
printk(KERN_CONT " w/%dKiB Cache", id[ATA_ID_BUF_SIZE] / 2);
|
|
|
|
printk(KERN_CONT ", CHS=%d/%d/%d\n",
|
|
drive->bios_cyl, drive->bios_head, drive->bios_sect);
|
|
|
|
/* write cache enabled? */
|
|
if ((id[ATA_ID_CSFO] & 1) || ata_id_wcache_enabled(id))
|
|
drive->dev_flags |= IDE_DFLAG_WCACHE;
|
|
|
|
set_wcache(drive, 1);
|
|
|
|
if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 &&
|
|
(drive->head == 0 || drive->head > 16)) {
|
|
printk(KERN_ERR "%s: invalid geometry: %d physical heads?\n",
|
|
drive->name, drive->head);
|
|
drive->dev_flags &= ~IDE_DFLAG_ATTACH;
|
|
} else
|
|
drive->dev_flags |= IDE_DFLAG_ATTACH;
|
|
}
|
|
|
|
static void ide_disk_flush(ide_drive_t *drive)
|
|
{
|
|
if (ata_id_flush_enabled(drive->id) == 0 ||
|
|
(drive->dev_flags & IDE_DFLAG_WCACHE) == 0)
|
|
return;
|
|
|
|
if (do_idedisk_flushcache(drive))
|
|
printk(KERN_INFO "%s: wcache flush failed!\n", drive->name);
|
|
}
|
|
|
|
static int ide_disk_init_media(ide_drive_t *drive, struct gendisk *disk)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int ide_disk_set_doorlock(ide_drive_t *drive, struct gendisk *disk,
|
|
int on)
|
|
{
|
|
struct ide_cmd cmd;
|
|
int ret;
|
|
|
|
if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) == 0)
|
|
return 0;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
cmd.tf.command = on ? ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK;
|
|
cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
|
|
cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
|
|
|
|
ret = ide_no_data_taskfile(drive, &cmd);
|
|
|
|
if (ret)
|
|
drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
|
|
|
|
return ret;
|
|
}
|
|
|
|
const struct ide_disk_ops ide_ata_disk_ops = {
|
|
.check = ide_disk_check,
|
|
.set_capacity = ide_disk_set_capacity,
|
|
.get_capacity = ide_disk_get_capacity,
|
|
.setup = ide_disk_setup,
|
|
.flush = ide_disk_flush,
|
|
.init_media = ide_disk_init_media,
|
|
.set_doorlock = ide_disk_set_doorlock,
|
|
.do_request = ide_do_rw_disk,
|
|
.ioctl = ide_disk_ioctl,
|
|
};
|