linux/drivers/usb
Anand Gadiyar 07a8cdd2bb usb: musb: do not use dma for control transfers
The Inventra DMA engine used with the MUSB controller in many
SoCs cannot use DMA for control transfers on EP0, but can use
DMA for all other transfers.

The USB core maps urbs for DMA if hcd->self.uses_dma is true.
(hcd->self.uses_dma is true for MUSB as well).

Split the uses_dma flag into two - one that says if the
controller needs to use PIO for control transfers, and
another which says if the controller uses DMA (for all
other transfers).

Also, populate this flag for all MUSB by default.

(Tested on OMAP3 and OMAP4 boards, with EHCI and MUSB HCDs
simultaneously in use).

Signed-off-by: Maulik Mankad <x0082077@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Praveena NADAHALLY <praveen.nadahally@stericsson.com>
Cc: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-22 12:55:02 +02:00
..
atm Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6 2010-10-23 11:47:02 -07:00
c67x00 usb: makefile cleanup 2010-10-22 10:22:07 -07:00
class Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 2010-10-22 20:30:48 -07:00
core usb: musb: do not use dma for control transfers 2010-11-22 12:55:02 +02:00
early usb: makefile cleanup 2010-10-22 10:22:07 -07:00
gadget BKL: remove extraneous #include <smp_lock.h> 2010-11-17 08:59:32 -08:00
host BKL: remove extraneous #include <smp_lock.h> 2010-11-17 08:59:32 -08:00
image SCSI host lock push-down 2010-11-16 13:33:23 -08:00
misc usb: misc: iowarrior: fix information leak to userland 2010-11-11 07:14:07 -08:00
mon BKL: remove extraneous #include <smp_lock.h> 2010-11-17 08:59:32 -08:00
musb usb: musb: do not use dma for control transfers 2010-11-22 12:55:02 +02:00
otg usb: otg: twl4030-usb: switch over to defines in twl.h 2010-10-29 00:28:51 +02:00
serial BKL: remove extraneous #include <smp_lock.h> 2010-11-17 08:59:32 -08:00
storage SCSI host lock push-down 2010-11-16 13:33:23 -08:00
wusbcore usb: makefile cleanup 2010-10-22 10:22:07 -07:00
Kconfig USB: add USB EHCI support for MPC5121 SoC 2010-10-22 10:21:58 -07:00
Makefile USB: drivers/usb/Makefile: conditionally descend to 'early' 2010-08-10 14:35:38 -07:00
README
usb-skeleton.c llseek: automatically add .llseek fop 2010-10-15 15:53:27 +02:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.