OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
0d0ffa94e0
linux/drivers/bluetooth
History
Sergio Cambra f4d6f7dce7 Bluetooth device 04ca:3008 should use ath3k 
Output of /sys/kernel/debug/usb/devices
T:  Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  6 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04ca ProdID=3008 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Sergio Cambra <sergio@programatica.es>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-10 02:51:03 -02:00
..
ath3k.c Bluetooth device 04ca:3008 should use ath3k 2013-01-10 02:51:03 -02:00
bcm203x.c Bluetooth: Use devm_kzalloc in bcm203x.c file. 2012-08-06 15:03:00 -03:00
bfusb.c Bluetooth: Use devm_kzalloc in bfusb.c file 2012-08-06 15:03:00 -03:00
bluecard_cs.c Bluetooth: bluecard_cs.c: removes unnecessary semicolon 2012-09-18 22:26:09 -03:00
bpa10x.c Bluetooth: Use devm_kzalloc in bpa10x.c file 2012-08-06 15:03:01 -03:00
bt3c_cs.c Bluetooth: Use devm_kzalloc in bt3c_cs.c file 2012-08-06 15:03:01 -03:00
btmrvl_debugfs.c simple_open: automatically convert to simple_open() 2012-04-05 15:25:50 -07:00
btmrvl_drv.h Bluetooth: btmrvl: Do not send vendor events to bluetooth stack 2012-06-19 00:19:11 -03:00
btmrvl_main.c Bluetooth: btmrvl: trivial style fixes 2012-07-09 09:45:10 -03:00
btmrvl_sdio.c Bluetooth: btmrv: Use %*ph specifier instead of print_hex_dump_bytes 2012-10-11 14:21:15 +08:00
btmrvl_sdio.h
btsdio.c Bluetooth: Use devm_kzalloc in btsdio.c file 2012-08-06 15:03:01 -03:00
btuart_cs.c Bluetooth: btuart_cs.c: removes unnecessary semicolon 2012-09-18 22:27:17 -03:00
btusb.c Bluetooth device 04ca:3008 should use ath3k 2013-01-10 02:51:03 -02:00
btwilink.c Bluetooth: Use module_platform_driver() in btwilink.c file 2012-09-08 16:53:47 -03:00
dtl1_cs.c Bluetooth: Use devm_kzalloc in dtl1_cs.c file 2012-08-06 15:03:02 -03:00
hci_ath.c tty: move the termios object into the tty 2012-07-16 13:00:41 -07:00
hci_bcsp.c Bluetooth: Remove 'register' usage from the subsystem 2012-06-05 06:34:07 +03:00
hci_h4.c Bluetooth: Remove 'register' usage from the subsystem 2012-06-05 06:34:07 +03:00
hci_h5.c Bluetooth: Introduce a flags variable to Three-wire UART state 2012-07-17 14:49:24 -03:00
hci_ldisc.c TTY: hci_ldisc, remove invalid check in open 2012-10-22 16:50:53 -07:00
hci_ll.c Bluetooth: hci_ll.c: removes unnecessary semicolon 2012-09-18 22:26:33 -03:00
hci_uart.h Bluetooth: Add delayed init sequence support for UART controllers 2012-07-17 14:48:29 -03:00
hci_vhci.c Bluetooth: hci_vhci.c: removes unnecessary semicolon 2012-09-18 22:26:43 -03:00
Kconfig Bluetooth: Initial skeleton for Three-wire UART (H5) support 2012-07-17 14:33:20 -03:00
Makefile Bluetooth: Initial skeleton for Three-wire UART (H5) support 2012-07-17 14:33:20 -03:00