OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
127f2fa31a
linux/include/scsi/scsi_device.h
James Bottomley 6f3a20242d [SCSI] allow REPORT LUN scanning even for LUN 0 PQ of 3 
Currently we just ignore the device, which means there are a few
arrays out there that we don't find.

This patch updates the scsi_report_lun_scan() to take a target instead
of a device so it can be called on a return of
SCSI_SCAN_TARGET_PRESENT, which is what a PQ 3 device returns.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-25 12:01:48 -05:00

306 lines
11 KiB
C
Raw Blame History

#ifndef _SCSI_SCSI_DEVICE_H
#define _SCSI_SCSI_DEVICE_H
#include <linux/device.h>
#include <linux/list.h>
#include <linux/spinlock.h>
#include <asm/atomic.h>
struct request_queue;
struct scsi_cmnd;
struct scsi_lun;
struct scsi_sense_hdr;
struct scsi_mode_data {
__u32 length;
__u16 block_descriptor_length;
__u8 medium_type;
__u8 device_specific;
__u8 header_length;
__u8 longlba:1;
};
/*
* sdev state: If you alter this, you also need to alter scsi_sysfs.c
* (for the ascii descriptions) and the state model enforcer:
* scsi_lib:scsi_device_set_state().
*/
enum scsi_device_state {
SDEV_CREATED = 1, /* device created but not added to sysfs
* Only internal commands allowed (for inq) */
SDEV_RUNNING, /* device properly configured
* All commands allowed */
SDEV_CANCEL, /* beginning to delete device
* Only error handler commands allowed */
SDEV_DEL, /* device deleted
* no commands allowed */
SDEV_QUIESCE, /* Device quiescent. No block commands
* will be accepted, only specials (which
* originate in the mid-layer) */
SDEV_OFFLINE, /* Device offlined (by error handling or
* user request */
SDEV_BLOCK, /* Device blocked by scsi lld. No scsi
* commands from user or midlayer should be issued
* to the scsi lld. */
};
struct scsi_device {
struct Scsi_Host *host;
struct request_queue *request_queue;
/* the next two are protected by the host->host_lock */
struct list_head siblings; /* list of all devices on this host */
struct list_head same_target_siblings; /* just the devices sharing same target id */
/* this is now protected by the request_queue->queue_lock */
unsigned int device_busy; /* commands actually active on
* low-level. protected by queue_lock. */
spinlock_t list_lock;
struct list_head cmd_list; /* queue of in use SCSI Command structures */
struct list_head starved_entry;
struct scsi_cmnd *current_cmnd; /* currently active command */
unsigned short queue_depth; /* How deep of a queue we want */
unsigned short last_queue_full_depth; /* These two are used by */
unsigned short last_queue_full_count; /* scsi_track_queue_full() */
unsigned long last_queue_full_time;/* don't let QUEUE_FULLs on the same
jiffie count on our counter, they
could all be from the same event. */
unsigned int id, lun, channel;
unsigned int manufacturer; /* Manufacturer of device, for using
* vendor-specific cmd's */
unsigned sector_size; /* size in bytes */
void *hostdata; /* available to low-level driver */
char devfs_name[256]; /* devfs junk */
char type;
char scsi_level;
char inq_periph_qual; /* PQ from INQUIRY data */
unsigned char inquiry_len; /* valid bytes in 'inquiry' */
unsigned char * inquiry; /* INQUIRY response data */
char * vendor; /* [back_compat] point into 'inquiry' ... */
char * model; /* ... after scan; point to static string */
char * rev; /* ... "nullnullnullnull" before scan */
unsigned char current_tag; /* current tag */
struct scsi_target *sdev_target; /* used only for single_lun */
unsigned int sdev_bflags; /* black/white flags as also found in
* scsi_devinfo.[hc]. For now used only to
* pass settings from slave_alloc to scsi
* core. */
unsigned writeable:1;
unsigned removable:1;
unsigned changed:1; /* Data invalid due to media change */
unsigned busy:1; /* Used to prevent races */
unsigned lockable:1; /* Able to prevent media removal */
unsigned locked:1; /* Media removal disabled */
unsigned borken:1; /* Tell the Seagate driver to be
* painfully slow on this device */
unsigned disconnect:1; /* can disconnect */
unsigned soft_reset:1; /* Uses soft reset option */
unsigned sdtr:1; /* Device supports SDTR messages */
unsigned wdtr:1; /* Device supports WDTR messages */
unsigned ppr:1; /* Device supports PPR messages */
unsigned tagged_supported:1; /* Supports SCSI-II tagged queuing */
unsigned simple_tags:1; /* simple queue tag messages are enabled */
unsigned ordered_tags:1;/* ordered queue tag messages are enabled */
unsigned single_lun:1; /* Indicates we should only allow I/O to
* one of the luns for the device at a
* time. */
unsigned was_reset:1; /* There was a bus reset on the bus for
* this device */
unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
* because we did a bus reset. */
unsigned use_10_for_rw:1; /* first try 10-byte read / write */
unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
unsigned skip_ms_page_8:1; /* do not use MODE SENSE page 0x08 */
unsigned skip_ms_page_3f:1; /* do not use MODE SENSE page 0x3f */
unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
unsigned no_start_on_add:1; /* do not issue start on add */
unsigned allow_restart:1; /* issue START_UNIT in error handler */
unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
unsigned select_no_atn:1;
unsigned fix_capacity:1; /* READ_CAPACITY is too high by 1 */
unsigned retry_hwerror:1; /* Retry HARDWARE_ERROR */
unsigned int device_blocked; /* Device returned QUEUE_FULL. */
unsigned int max_device_blocked; /* what device_blocked counts down from */
#define SCSI_DEFAULT_DEVICE_BLOCKED 3
atomic_t iorequest_cnt;
atomic_t iodone_cnt;
atomic_t ioerr_cnt;
int timeout;
struct device sdev_gendev;
struct class_device sdev_classdev;
enum scsi_device_state sdev_state;
unsigned long sdev_data[0];
} __attribute__((aligned(sizeof(unsigned long))));
#define to_scsi_device(d) \
container_of(d, struct scsi_device, sdev_gendev)
#define class_to_sdev(d) \
container_of(d, struct scsi_device, sdev_classdev)
#define transport_class_to_sdev(class_dev) \
to_scsi_device(class_dev->dev)
/*
* scsi_target: representation of a scsi target, for now, this is only
* used for single_lun devices. If no one has active IO to the target,
* starget_sdev_user is NULL, else it points to the active sdev.
*/
struct scsi_target {
struct scsi_device *starget_sdev_user;
struct list_head siblings;
struct list_head devices;
struct device dev;
unsigned int reap_ref; /* protected by the host lock */
unsigned int channel;
unsigned int id; /* target id ... replace
* scsi_device.id eventually */
unsigned long create:1; /* signal that it needs to be added */
char scsi_level;
void *hostdata; /* available to low-level driver */
unsigned long starget_data[0]; /* for the transport */
/* starget_data must be the last element!!!! */
} __attribute__((aligned(sizeof(unsigned long))));
#define to_scsi_target(d) container_of(d, struct scsi_target, dev)
static inline struct scsi_target *scsi_target(struct scsi_device *sdev)
{
return to_scsi_target(sdev->sdev_gendev.parent);
}
#define transport_class_to_starget(class_dev) \
to_scsi_target(class_dev->dev)
extern struct scsi_device *__scsi_add_device(struct Scsi_Host *,
uint, uint, uint, void *hostdata);
extern int scsi_add_device(struct Scsi_Host *host, uint channel,
uint target, uint lun);
extern void scsi_remove_device(struct scsi_device *);
extern int scsi_device_cancel(struct scsi_device *, int);
extern int scsi_device_get(struct scsi_device *);
extern void scsi_device_put(struct scsi_device *);
extern struct scsi_device *scsi_device_lookup(struct Scsi_Host *,
uint, uint, uint);
extern struct scsi_device *__scsi_device_lookup(struct Scsi_Host *,
uint, uint, uint);
extern struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *,
uint);
extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *,
uint);
extern void starget_for_each_device(struct scsi_target *, void *,
void (*fn)(struct scsi_device *, void *));
/* only exposed to implement shost_for_each_device */
extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *,
struct scsi_device *);
/**
* shost_for_each_device - iterate over all devices of a host
* @sdev: iterator
* @host: host whiches devices we want to iterate over
*
* This traverses over each devices of @shost. The devices have
* a reference that must be released by scsi_host_put when breaking
* out of the loop.
*/
#define shost_for_each_device(sdev, shost) \
for ((sdev) = __scsi_iterate_devices((shost), NULL); \
(sdev); \
(sdev) = __scsi_iterate_devices((shost), (sdev)))
/**
* __shost_for_each_device - iterate over all devices of a host (UNLOCKED)
* @sdev: iterator
* @host: host whiches devices we want to iterate over
*
* This traverses over each devices of @shost. It does _not_ take a
* reference on the scsi_device, thus it the whole loop must be protected
* by shost->host_lock.
*
* Note: The only reason why drivers would want to use this is because
* they're need to access the device list in irq context. Otherwise you
* really want to use shost_for_each_device instead.
*/
#define __shost_for_each_device(sdev, shost) \
list_for_each_entry((sdev), &((shost)->__devices), siblings)
extern void scsi_adjust_queue_depth(struct scsi_device *, int, int);
extern int scsi_track_queue_full(struct scsi_device *, int);
extern int scsi_set_medium_removal(struct scsi_device *, char);
extern int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
unsigned char *buffer, int len, int timeout,
int retries, struct scsi_mode_data *data,
struct scsi_sense_hdr *);
extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout,
int retries);
extern int scsi_device_set_state(struct scsi_device *sdev,
enum scsi_device_state state);
extern int scsi_device_quiesce(struct scsi_device *sdev);
extern void scsi_device_resume(struct scsi_device *sdev);
extern void scsi_target_quiesce(struct scsi_target *);
extern void scsi_target_resume(struct scsi_target *);
extern void scsi_scan_target(struct device *parent, unsigned int channel,
unsigned int id, unsigned int lun, int rescan);
extern void scsi_target_reap(struct scsi_target *);
extern void scsi_target_block(struct device *);
extern void scsi_target_unblock(struct device *);
extern void scsi_remove_target(struct device *);
extern void int_to_scsilun(unsigned int, struct scsi_lun *);
extern const char *scsi_device_state_name(enum scsi_device_state);
extern int scsi_is_sdev_device(const struct device *);
extern int scsi_is_target_device(const struct device *);
extern int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
int data_direction, void *buffer, unsigned bufflen,
unsigned char *sense, int timeout, int retries,
int flag);
extern int scsi_execute_req(struct scsi_device *sdev, const unsigned char *cmd,
int data_direction, void *buffer, unsigned bufflen,
struct scsi_sense_hdr *, int timeout, int retries);
static inline int scsi_device_online(struct scsi_device *sdev)
{
return sdev->sdev_state != SDEV_OFFLINE;
}
/* accessor functions for the SCSI parameters */
static inline int scsi_device_sync(struct scsi_device *sdev)
{
return sdev->sdtr;
}
static inline int scsi_device_wide(struct scsi_device *sdev)
{
return sdev->wdtr;
}
static inline int scsi_device_dt(struct scsi_device *sdev)
{
return sdev->ppr;
}
static inline int scsi_device_dt_only(struct scsi_device *sdev)
{
if (sdev->inquiry_len < 57)
return 0;
return (sdev->inquiry[56] & 0x0c) == 0x04;
}
static inline int scsi_device_ius(struct scsi_device *sdev)
{
if (sdev->inquiry_len < 57)
return 0;
return sdev->inquiry[56] & 0x01;
}
static inline int scsi_device_qas(struct scsi_device *sdev)
{
if (sdev->inquiry_len < 57)
return 0;
return sdev->inquiry[56] & 0x02;
}
#endif /* _SCSI_SCSI_DEVICE_H */
Reference in New Issue View Git Blame Copy Permalink