linux/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts

226 lines
4.7 KiB
Plaintext

/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "Iomega StorCenter ix2-200";
compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = &uart0;
};
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pinctrl-0 = < &pmx_led_sata_brt_ctrl_1
&pmx_led_sata_brt_ctrl_2
&pmx_led_backup_brt_ctrl_1
&pmx_led_backup_brt_ctrl_2
&pmx_led_power_brt_ctrl_1
&pmx_led_power_brt_ctrl_2
&pmx_led_health_brt_ctrl_1
&pmx_led_health_brt_ctrl_2
&pmx_led_rebuild_brt_ctrl_1
&pmx_led_rebuild_brt_ctrl_2 >;
pinctrl-names = "default";
pmx_button_reset: pmx-button-reset {
marvell,pins = "mpp12";
marvell,function = "gpio";
};
pmx_button_power: pmx-button-power {
marvell,pins = "mpp14";
marvell,function = "gpio";
};
pmx_led_backup: pmx-led-backup {
marvell,pins = "mpp15";
marvell,function = "gpio";
};
pmx_led_power: pmx-led-power {
marvell,pins = "mpp16";
marvell,function = "gpio";
};
pmx_button_otb: pmx-button-otb {
marvell,pins = "mpp35";
marvell,function = "gpio";
};
pmx_led_rebuild: pmx-led-rebuild {
marvell,pins = "mpp36";
marvell,function = "gpio";
};
pmx_led_health: pmx-led_health {
marvell,pins = "mpp37";
marvell,function = "gpio";
};
pmx_led_sata_brt_ctrl_1: pmx-led-sata-brt-ctrl-1 {
marvell,pins = "mpp38";
marvell,function = "gpio";
};
pmx_led_sata_brt_ctrl_2: pmx-led-sata-brt-ctrl-2 {
marvell,pins = "mpp39";
marvell,function = "gpio";
};
pmx_led_backup_brt_ctrl_1: pmx-led-backup-brt-ctrl-1 {
marvell,pins = "mpp40";
marvell,function = "gpio";
};
pmx_led_backup_brt_ctrl_2: pmx-led-backup-brt-ctrl-2 {
marvell,pins = "mpp41";
marvell,function = "gpio";
};
pmx_led_power_brt_ctrl_1: pmx-led-power-brt-ctrl-1 {
marvell,pins = "mpp42";
marvell,function = "gpio";
};
pmx_led_power_brt_ctrl_2: pmx-led-power-brt-ctrl-2 {
marvell,pins = "mpp43";
marvell,function = "gpio";
};
pmx_led_health_brt_ctrl_1: pmx-led-health-brt-ctrl-1 {
marvell,pins = "mpp44";
marvell,function = "gpio";
};
pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 {
marvell,pins = "mpp45";
marvell,function = "gpio";
};
pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
marvell,pins = "mpp46";
marvell,function = "gpio";
};
pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
};
i2c@11000 {
status = "okay";
lm63: lm63@4c {
compatible = "national,lm63";
reg = <0x4c>;
};
};
serial@12000 {
status = "ok";
};
sata@80000 {
status = "okay";
nr-ports = <2>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = < &pmx_led_backup &pmx_led_power
&pmx_led_rebuild &pmx_led_health >;
pinctrl-names = "default";
power_led {
label = "status:white:power_led";
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
rebuild_led {
label = "status:white:rebuild_led";
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
};
health_led {
label = "status:red:health_led";
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
};
backup_led {
label = "status:blue:backup_led";
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_button_reset &pmx_button_power
&pmx_button_otb>;
pinctrl-names = "default";
Power {
label = "Power Button";
linux,code = <KEY_POWER>;
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
Reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
OTB {
label = "OTB Button";
linux,code = <KEY_COPY>;
gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
};
};
gpio-poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
};
};
&nand {
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
read-only;
};
partition@a0000 {
label = "env";
reg = <0xa0000 0x20000>;
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x100000 0x300000>;
};
partition@400000 {
label = "rootfs";
reg = <0x400000 0x1C00000>;
};
};
&mdio {
status = "okay";
ethphy1: ethernet-phy@11 {
reg = <11>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
speed = <1000>;
duplex = <1>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};