linux/arch/s390/kernel/reipl.S

156 lines
4.8 KiB
ArmAsm

/*
* Copyright IBM Corp 2000, 2011
* Author(s): Holger Smolinski <Holger.Smolinski@de.ibm.com>,
* Denis Joseph Barrow,
*/
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/sigp.h>
#
# store_status
#
# Prerequisites to run this function:
# - Prefix register is set to zero
# - Original prefix register is stored in "dump_prefix_page"
# - Lowcore protection is off
#
ENTRY(store_status)
/* Save register one and load save area base */
stg %r1,__LC_SAVE_AREA_RESTART
lghi %r1,SAVE_AREA_BASE
/* General purpose registers */
stmg %r0,%r15,__LC_GPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
lg %r2,__LC_SAVE_AREA_RESTART
stg %r2,__LC_GPREGS_SAVE_AREA-SAVE_AREA_BASE+8(%r1)
/* Control registers */
stctg %c0,%c15,__LC_CREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
/* Access registers */
stam %a0,%a15,__LC_AREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
/* Floating point registers */
std %f0, 0x00 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
std %f1, 0x08 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
std %f2, 0x10 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
std %f3, 0x18 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
std %f4, 0x20 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
std %f5, 0x28 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
std %f6, 0x30 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
std %f7, 0x38 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
std %f8, 0x40 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
std %f9, 0x48 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
std %f10,0x50 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
std %f11,0x58 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
std %f12,0x60 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
std %f13,0x68 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
std %f14,0x70 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
std %f15,0x78 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
/* Floating point control register */
stfpc __LC_FP_CREG_SAVE_AREA-SAVE_AREA_BASE(%r1)
/* CPU timer */
stpt __LC_CPU_TIMER_SAVE_AREA-SAVE_AREA_BASE(%r1)
/* Saved prefix register */
larl %r2,dump_prefix_page
mvc __LC_PREFIX_SAVE_AREA-SAVE_AREA_BASE(4,%r1),0(%r2)
/* Clock comparator - seven bytes */
larl %r2,.Lclkcmp
stckc 0(%r2)
mvc __LC_CLOCK_COMP_SAVE_AREA-SAVE_AREA_BASE + 1(7,%r1),1(%r2)
/* Program status word */
epsw %r2,%r3
st %r2,__LC_PSW_SAVE_AREA-SAVE_AREA_BASE + 0(%r1)
st %r3,__LC_PSW_SAVE_AREA-SAVE_AREA_BASE + 4(%r1)
larl %r2,store_status
stg %r2,__LC_PSW_SAVE_AREA-SAVE_AREA_BASE + 8(%r1)
br %r14
.section .bss
.align 8
.Lclkcmp: .quad 0x0000000000000000
.previous
#
# do_reipl_asm
# Parameter: r2 = schid of reipl device
#
ENTRY(do_reipl_asm)
basr %r13,0
.Lpg0: lpswe .Lnewpsw-.Lpg0(%r13)
.Lpg1: brasl %r14,store_status
lctlg %c6,%c6,.Lall-.Lpg0(%r13)
lgr %r1,%r2
mvc __LC_PGM_NEW_PSW(16),.Lpcnew-.Lpg0(%r13)
stsch .Lschib-.Lpg0(%r13)
oi .Lschib+5-.Lpg0(%r13),0x84
.Lecs: xi .Lschib+27-.Lpg0(%r13),0x01
msch .Lschib-.Lpg0(%r13)
lghi %r0,5
.Lssch: ssch .Liplorb-.Lpg0(%r13)
jz .L001
brct %r0,.Lssch
bas %r14,.Ldisab-.Lpg0(%r13)
.L001: mvc __LC_IO_NEW_PSW(16),.Lionew-.Lpg0(%r13)
.Ltpi: lpswe .Lwaitpsw-.Lpg0(%r13)
.Lcont: c %r1,__LC_SUBCHANNEL_ID
jnz .Ltpi
clc __LC_IO_INT_PARM(4),.Liplorb-.Lpg0(%r13)
jnz .Ltpi
tsch .Liplirb-.Lpg0(%r13)
tm .Liplirb+9-.Lpg0(%r13),0xbf
jz .L002
bas %r14,.Ldisab-.Lpg0(%r13)
.L002: tm .Liplirb+8-.Lpg0(%r13),0xf3
jz .L003
bas %r14,.Ldisab-.Lpg0(%r13)
.L003: st %r1,__LC_SUBCHANNEL_ID
lhi %r1,0 # mode 0 = esa
slr %r0,%r0 # set cpuid to zero
sigp %r1,%r0,SIGP_SET_ARCHITECTURE # switch to esa mode
lpsw 0
.Ldisab: sll %r14,1
srl %r14,1 # need to kill hi bit to avoid specification exceptions.
st %r14,.Ldispsw+12-.Lpg0(%r13)
lpswe .Ldispsw-.Lpg0(%r13)
.align 8
.Lall: .quad 0x00000000ff000000
.align 16
/*
* These addresses have to be 31 bit otherwise
* the sigp will throw a specifcation exception
* when switching to ESA mode as bit 31 be set
* in the ESA psw.
* Bit 31 of the addresses has to be 0 for the
* 31bit lpswe instruction a fact they appear to have
* omitted from the pop.
*/
.Lnewpsw: .quad 0x0000000080000000
.quad .Lpg1
.Lpcnew: .quad 0x0000000080000000
.quad .Lecs
.Lionew: .quad 0x0000000080000000
.quad .Lcont
.Lwaitpsw: .quad 0x0202000080000000
.quad .Ltpi
.Ldispsw: .quad 0x0002000080000000
.quad 0x0000000000000000
.Liplccws: .long 0x02000000,0x60000018
.long 0x08000008,0x20000001
.Liplorb: .long 0x0049504c,0x0040ff80
.long 0x00000000+.Liplccws
.Lschib: .long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.Liplirb: .long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000