linux/arch/arm/mach-omap2/pm.h
Linus Torvalds a11da7df65 ARM: arm-soc: power management and clock changes
This branch contains a largeish set of updates of power management and
 clock setup. The bulk of it is for OMAP/AM33xx platforms, but also a
 few around hotplug/suspend/resume on Exynos.
 
 It includes a split-up of some of the OMAP clock data into separate
 files which adds to the diffstat, but gross delta is fairly reasonable.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQySrdAAoJEIwa5zzehBx3XBMQAJCgrE/I1vbuiENiVMLpQkN7
 0Y5t89SwoALnme5jsM8vW/H0o6b163FfH+249UNs6dyk6MdCqqSv8cQVvSfCKRKn
 m4JTXS6njSnYgU025klNU9W3FyMuFcgH8b63+c5+sCcqfvdkxrjpNoKqAYNxQlgJ
 6DHgHCKZP3JB1e2EFqViw0GJgZIjTNxlWvx8XLcAShSapQ+Ovq/iAcKo41o7ZadB
 4zV//VkBMv0TLNTs6SoR0EO8qM+2nIUKE8fgPrRxvvb98tuasKPvlSq9VUeIjnYk
 kWjNTQYbD1IkrAMPYrwcpLU3xkEr14wrKDBtPK6GdCDcXzdyKq3fzROOXNsqrLmn
 Y8PkY+J39B59F0DKjyrCjasZyi0tQQV6ps5Xm2X2CB003GWEbo1yu+BodShYEyaL
 7OvkLiVpOtq+LOYcsScHtOGdO9le2O3yZevNRvlrCDCvJUYbXNjaM9ZrWcQuTlJc
 oseYNSRPaIP5PMv2c+Xup9qh/dyAjj8g6gSi9BlDvwVOu/+Cf3laaCAXaFph22jT
 /m8fW2paiP5UJ0gSt1MLAGFxKi0YI/Qxck8G11LJxUwMZd3SIfOPUAY27tnNC4yL
 GRynOi3BFRMUAe/Leu2qgwEyoME5nHn+OmAKb36WTYH/HL+PGzHq84e+Wfdan8ha
 YcSKc1A52LSoYTi4XTUX
 =h2Qo
 -----END PGP SIGNATURE-----

Merge tag 'pm-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC power management and clock changes from Olof Johansson:
 "This branch contains a largeish set of updates of power management and
  clock setup.  The bulk of it is for OMAP/AM33xx platforms, but also a
  few around hotplug/suspend/resume on Exynos.

  It includes a split-up of some of the OMAP clock data into separate
  files which adds to the diffstat, but gross delta is fairly reasonable."

* tag 'pm-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits)
  ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h
  ASoC: OMAP: mcbsp fixes for enabling ARM multiplatform support
  watchdog: OMAP: fixup for ARM multiplatform support
  ARM: EXYNOS: Add flush_cache_all in suspend finisher
  ARM: EXYNOS: Remove scu_enable from cpuidle
  ARM: EXYNOS: Fix soft reboot hang after suspend/resume
  ARM: EXYNOS: Add support for rtc wakeup
  ARM: EXYNOS: fix the hotplug for Cortex-A15
  ARM: OMAP2+: omap_device: Correct resource handling for DT boot
  ARM: OMAP2+: hwmod: Add possibility to count hwmod resources based on type
  ARM: OMAP2+: hwmod: Add support for per hwmod/module context lost count
  ARM: OMAP2+: PRM: initialize some PRM functions early
  ARM: OMAP2+: voltage: fixup oscillator handling when CONFIG_PM=n
  ARM: OMAP4: USB: power down MUSB PHY during boot
  ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts
  ARM: OMAP2xxx: clock: drop obsolete clock data
  ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts
  ARM: OMAP3+: DPLL: drop !CONFIG_COMMON_CLK sections
  ARM: AM33xx: clock: drop obsolete clock data
  ARM: OMAP3xxx: clk: drop obsolete clock data
  ...
2012-12-13 10:58:20 -08:00

152 lines
4.0 KiB
C

/*
* OMAP2/3 Power Management Routines
*
* Copyright (C) 2008 Nokia Corporation
* Jouni Hogander
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ARCH_ARM_MACH_OMAP2_PM_H
#define __ARCH_ARM_MACH_OMAP2_PM_H
#include <linux/err.h>
#include "powerdomain.h"
#ifdef CONFIG_CPU_IDLE
extern int __init omap3_idle_init(void);
extern int __init omap4_idle_init(void);
#else
static inline int omap3_idle_init(void)
{
return 0;
}
static inline int omap4_idle_init(void)
{
return 0;
}
#endif
extern void *omap3_secure_ram_storage;
extern void omap3_pm_off_mode_enable(int);
extern void omap_sram_idle(void);
extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
extern int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused);
extern int (*omap_pm_suspend)(void);
#if defined(CONFIG_PM_OPP)
extern int omap3_opp_init(void);
extern int omap4_opp_init(void);
#else
static inline int omap3_opp_init(void)
{
return -EINVAL;
}
static inline int omap4_opp_init(void)
{
return -EINVAL;
}
#endif
extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
#ifdef CONFIG_PM_DEBUG
extern u32 enable_off_mode;
#else
#define enable_off_mode 0
#endif
#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
#else
#define pm_dbg_update_time(pwrdm, prev) do {} while (0);
#endif /* CONFIG_PM_DEBUG */
/* 24xx */
extern void omap24xx_idle_loop_suspend(void);
extern unsigned int omap24xx_idle_loop_suspend_sz;
extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
void __iomem *sdrc_power);
extern unsigned int omap24xx_cpu_suspend_sz;
/* 3xxx */
extern void omap34xx_cpu_suspend(int save_state);
/* omap3_do_wfi function pointer and size, for copy to SRAM */
extern void omap3_do_wfi(void);
extern unsigned int omap3_do_wfi_sz;
/* ... and its pointer from SRAM after copy */
extern void (*omap3_do_wfi_sram)(void);
/* save_secure_ram_context function pointer and size, for copy to SRAM */
extern int save_secure_ram_context(u32 *addr);
extern unsigned int save_secure_ram_context_sz;
extern void omap3_save_scratchpad_contents(void);
#define PM_RTA_ERRATUM_i608 (1 << 0)
#define PM_SDRC_WAKEUP_ERRATUM_i583 (1 << 1)
#define PM_PER_MEMORIES_ERRATUM_i582 (1 << 2)
#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
extern u16 pm34xx_errata;
#define IS_PM34XX_ERRATUM(id) (pm34xx_errata & (id))
extern void enable_omap3630_toggle_l2_on_restore(void);
#else
#define IS_PM34XX_ERRATUM(id) 0
static inline void enable_omap3630_toggle_l2_on_restore(void) { }
#endif /* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */
#define PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD (1 << 0)
#if defined(CONFIG_ARCH_OMAP4)
extern u16 pm44xx_errata;
#define IS_PM44XX_ERRATUM(id) (pm44xx_errata & (id))
#else
#define IS_PM44XX_ERRATUM(id) 0
#endif
#ifdef CONFIG_POWER_AVS_OMAP
extern int omap_devinit_smartreflex(void);
extern void omap_enable_smartreflex_on_init(void);
#else
static inline int omap_devinit_smartreflex(void)
{
return -EINVAL;
}
static inline void omap_enable_smartreflex_on_init(void) {}
#endif
#ifdef CONFIG_TWL4030_CORE
extern int omap3_twl_init(void);
extern int omap4_twl_init(void);
extern int omap3_twl_set_sr_bit(bool enable);
#else
static inline int omap3_twl_init(void)
{
return -EINVAL;
}
static inline int omap4_twl_init(void)
{
return -EINVAL;
}
#endif
#ifdef CONFIG_PM
extern void omap_pm_setup_oscillator(u32 tstart, u32 tshut);
extern void omap_pm_get_oscillator(u32 *tstart, u32 *tshut);
extern void omap_pm_setup_sr_i2c_pcb_length(u32 mm);
#else
static inline void omap_pm_setup_oscillator(u32 tstart, u32 tshut) { }
static inline void omap_pm_get_oscillator(u32 *tstart, u32 *tshut) { *tstart = *tshut = 0; }
static inline void omap_pm_setup_sr_i2c_pcb_length(u32 mm) { }
#endif
#endif