linux/drivers/usb/mtu3/mtu3_host.c

252 lines
6.3 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* mtu3_dr.c - dual role switch and host glue layer
*
* Copyright (C) 2016 MediaTek Inc.
*
* Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
*/
#include <linux/clk.h>
#include <linux/iopoll.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
#include "mtu3.h"
#include "mtu3_dr.h"
#define PERI_WK_CTRL1 0x404
#define UWK_CTL1_IS_C(x) (((x) & 0xf) << 26)
#define UWK_CTL1_IS_E BIT(25)
#define UWK_CTL1_IDDIG_C(x) (((x) & 0xf) << 11) /* cycle debounce */
#define UWK_CTL1_IDDIG_E BIT(10) /* enable debounce */
#define UWK_CTL1_IDDIG_P BIT(9) /* polarity */
#define UWK_CTL1_IS_P BIT(6) /* polarity for ip sleep */
/*
* ip-sleep wakeup mode:
* all clocks can be turn off, but power domain should be kept on
*/
static void ssusb_wakeup_ip_sleep_en(struct ssusb_mtk *ssusb)
{
u32 tmp;
struct regmap *pericfg = ssusb->pericfg;
regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
tmp &= ~UWK_CTL1_IS_P;
tmp &= ~(UWK_CTL1_IS_C(0xf));
tmp |= UWK_CTL1_IS_C(0x8);
regmap_write(pericfg, PERI_WK_CTRL1, tmp);
regmap_write(pericfg, PERI_WK_CTRL1, tmp | UWK_CTL1_IS_E);
regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
dev_dbg(ssusb->dev, "%s(): WK_CTRL1[P6,E25,C26:29]=%#x\n",
__func__, tmp);
}
static void ssusb_wakeup_ip_sleep_dis(struct ssusb_mtk *ssusb)
{
u32 tmp;
regmap_read(ssusb->pericfg, PERI_WK_CTRL1, &tmp);
tmp &= ~UWK_CTL1_IS_E;
regmap_write(ssusb->pericfg, PERI_WK_CTRL1, tmp);
}
int ssusb_wakeup_of_property_parse(struct ssusb_mtk *ssusb,
struct device_node *dn)
{
struct device *dev = ssusb->dev;
/*
* Wakeup function is optional, so it is not an error if this property
* does not exist, and in such case, no need to get relative
* properties anymore.
*/
ssusb->wakeup_en = of_property_read_bool(dn, "mediatek,enable-wakeup");
if (!ssusb->wakeup_en)
return 0;
ssusb->pericfg = syscon_regmap_lookup_by_phandle(dn,
"mediatek,syscon-wakeup");
if (IS_ERR(ssusb->pericfg)) {
dev_err(dev, "fail to get pericfg regs\n");
return PTR_ERR(ssusb->pericfg);
}
return 0;
}
static void host_ports_num_get(struct ssusb_mtk *ssusb)
{
u32 xhci_cap;
xhci_cap = mtu3_readl(ssusb->ippc_base, U3D_SSUSB_IP_XHCI_CAP);
ssusb->u2_ports = SSUSB_IP_XHCI_U2_PORT_NUM(xhci_cap);
ssusb->u3_ports = SSUSB_IP_XHCI_U3_PORT_NUM(xhci_cap);
dev_dbg(ssusb->dev, "host - u2_ports:%d, u3_ports:%d\n",
ssusb->u2_ports, ssusb->u3_ports);
}
/* only configure ports will be used later */
int ssusb_host_enable(struct ssusb_mtk *ssusb)
{
void __iomem *ibase = ssusb->ippc_base;
int num_u3p = ssusb->u3_ports;
int num_u2p = ssusb->u2_ports;
int u3_ports_disabed;
u32 check_clk;
u32 value;
int i;
/* power on host ip */
mtu3_clrbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);
/* power on and enable u3 ports except skipped ones */
u3_ports_disabed = 0;
for (i = 0; i < num_u3p; i++) {
if ((0x1 << i) & ssusb->u3p_dis_msk) {
u3_ports_disabed++;
continue;
}
value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
value &= ~(SSUSB_U3_PORT_PDN | SSUSB_U3_PORT_DIS);
value |= SSUSB_U3_PORT_HOST_SEL;
mtu3_writel(ibase, SSUSB_U3_CTRL(i), value);
}
/* power on and enable all u2 ports */
for (i = 0; i < num_u2p; i++) {
value = mtu3_readl(ibase, SSUSB_U2_CTRL(i));
value &= ~(SSUSB_U2_PORT_PDN | SSUSB_U2_PORT_DIS);
value |= SSUSB_U2_PORT_HOST_SEL;
mtu3_writel(ibase, SSUSB_U2_CTRL(i), value);
}
check_clk = SSUSB_XHCI_RST_B_STS;
if (num_u3p > u3_ports_disabed)
check_clk = SSUSB_U3_MAC_RST_B_STS;
return ssusb_check_clocks(ssusb, check_clk);
}
int ssusb_host_disable(struct ssusb_mtk *ssusb, bool suspend)
{
void __iomem *ibase = ssusb->ippc_base;
int num_u3p = ssusb->u3_ports;
int num_u2p = ssusb->u2_ports;
u32 value;
int ret;
int i;
/* power down and disable u3 ports except skipped ones */
for (i = 0; i < num_u3p; i++) {
if ((0x1 << i) & ssusb->u3p_dis_msk)
continue;
value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
value |= SSUSB_U3_PORT_PDN;
value |= suspend ? 0 : SSUSB_U3_PORT_DIS;
mtu3_writel(ibase, SSUSB_U3_CTRL(i), value);
}
/* power down and disable all u2 ports */
for (i = 0; i < num_u2p; i++) {
value = mtu3_readl(ibase, SSUSB_U2_CTRL(i));
value |= SSUSB_U2_PORT_PDN;
value |= suspend ? 0 : SSUSB_U2_PORT_DIS;
mtu3_writel(ibase, SSUSB_U2_CTRL(i), value);
}
/* power down host ip */
mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);
if (!suspend)
return 0;
/* wait for host ip to sleep */
ret = readl_poll_timeout(ibase + U3D_SSUSB_IP_PW_STS1, value,
(value & SSUSB_IP_SLEEP_STS), 100, 100000);
if (ret)
dev_err(ssusb->dev, "ip sleep failed!!!\n");
return ret;
}
static void ssusb_host_setup(struct ssusb_mtk *ssusb)
{
struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
host_ports_num_get(ssusb);
/*
* power on host and power on/enable all ports
* if support OTG, gadget driver will switch port0 to device mode
*/
ssusb_host_enable(ssusb);
if (otg_sx->manual_drd_enabled)
ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_HOST);
/* if port0 supports dual-role, works as host mode by default */
ssusb_set_vbus(&ssusb->otg_switch, 1);
}
static void ssusb_host_cleanup(struct ssusb_mtk *ssusb)
{
if (ssusb->is_host)
ssusb_set_vbus(&ssusb->otg_switch, 0);
ssusb_host_disable(ssusb, false);
}
/*
* If host supports multiple ports, the VBUSes(5V) of ports except port0
* which supports OTG are better to be enabled by default in DTS.
* Because the host driver will keep link with devices attached when system
* enters suspend mode, so no need to control VBUSes after initialization.
*/
int ssusb_host_init(struct ssusb_mtk *ssusb, struct device_node *parent_dn)
{
struct device *parent_dev = ssusb->dev;
int ret;
ssusb_host_setup(ssusb);
ret = of_platform_populate(parent_dn, NULL, NULL, parent_dev);
if (ret) {
dev_dbg(parent_dev, "failed to create child devices at %pOF\n",
parent_dn);
return ret;
}
dev_info(parent_dev, "xHCI platform device register success...\n");
return 0;
}
void ssusb_host_exit(struct ssusb_mtk *ssusb)
{
of_platform_depopulate(ssusb->dev);
ssusb_host_cleanup(ssusb);
}
int ssusb_wakeup_enable(struct ssusb_mtk *ssusb)
{
if (ssusb->wakeup_en)
ssusb_wakeup_ip_sleep_en(ssusb);
return 0;
}
void ssusb_wakeup_disable(struct ssusb_mtk *ssusb)
{
if (ssusb->wakeup_en)
ssusb_wakeup_ip_sleep_dis(ssusb);
}