linux/drivers/scsi/sun3_scsi.c

687 lines
15 KiB
C

/*
* Sun3 SCSI stuff by Erik Verbruggen (erik@bigmama.xtdnet.nl)
*
* Sun3 DMA routines added by Sam Creasey (sammy@sammy.net)
*
* VME support added by Sam Creasey
*
* TODO: modify this driver to support multiple Sun3 SCSI VME boards
*
* Adapted from mac_scsinew.c:
*/
/*
* Generic Macintosh NCR5380 driver
*
* Copyright 1998, Michael Schmitz <mschmitz@lbl.gov>
*
* derived in part from:
*/
/*
* Generic Generic NCR5380 driver
*
* Copyright 1995, Russell King
*/
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/dvma.h>
#include <scsi/scsi_host.h>
#include "sun3_scsi.h"
/* Definitions for the core NCR5380 driver. */
#define REAL_DMA
/* #define SUPPORT_TAGS */
/* minimum number of bytes to do dma on */
#define DMA_MIN_SIZE 129
/* #define MAX_TAGS 32 */
#define NCR5380_implementation_fields /* none */
#define NCR5380_read(reg) sun3scsi_read(reg)
#define NCR5380_write(reg, value) sun3scsi_write(reg, value)
#define NCR5380_queue_command sun3scsi_queue_command
#define NCR5380_bus_reset sun3scsi_bus_reset
#define NCR5380_abort sun3scsi_abort
#define NCR5380_show_info sun3scsi_show_info
#define NCR5380_info sun3scsi_info
#define NCR5380_dma_read_setup(instance, data, count) \
sun3scsi_dma_setup(data, count, 0)
#define NCR5380_dma_write_setup(instance, data, count) \
sun3scsi_dma_setup(data, count, 1)
#define NCR5380_dma_residual(instance) \
sun3scsi_dma_residual(instance)
#define NCR5380_dma_xfer_len(instance, cmd, phase) \
sun3scsi_dma_xfer_len(cmd->SCp.this_residual, cmd, !((phase) & SR_IO))
#define NCR5380_acquire_dma_irq(instance) (1)
#define NCR5380_release_dma_irq(instance)
#include "NCR5380.h"
extern int sun3_map_test(unsigned long, char *);
static int setup_can_queue = -1;
module_param(setup_can_queue, int, 0);
static int setup_cmd_per_lun = -1;
module_param(setup_cmd_per_lun, int, 0);
static int setup_sg_tablesize = -1;
module_param(setup_sg_tablesize, int, 0);
#ifdef SUPPORT_TAGS
static int setup_use_tagged_queuing = -1;
module_param(setup_use_tagged_queuing, int, 0);
#endif
static int setup_hostid = -1;
module_param(setup_hostid, int, 0);
/* #define RESET_BOOT */
#define AFTER_RESET_DELAY (HZ/2)
/* ms to wait after hitting dma regs */
#define SUN3_DMA_DELAY 10
/* dvma buffer to allocate -- 32k should hopefully be more than sufficient */
#define SUN3_DVMA_BUFSIZE 0xe000
static struct scsi_cmnd *sun3_dma_setup_done;
static unsigned char *sun3_scsi_regp;
static volatile struct sun3_dma_regs *dregs;
static struct sun3_udc_regs *udc_regs;
static unsigned char *sun3_dma_orig_addr = NULL;
static unsigned long sun3_dma_orig_count = 0;
static int sun3_dma_active = 0;
static unsigned long last_residual = 0;
static struct Scsi_Host *default_instance;
/*
* NCR 5380 register access functions
*/
static inline unsigned char sun3scsi_read(int reg)
{
return in_8(sun3_scsi_regp + reg);
}
static inline void sun3scsi_write(int reg, int value)
{
out_8(sun3_scsi_regp + reg, value);
}
#ifndef SUN3_SCSI_VME
/* dma controller register access functions */
static inline unsigned short sun3_udc_read(unsigned char reg)
{
unsigned short ret;
dregs->udc_addr = UDC_CSR;
udelay(SUN3_DMA_DELAY);
ret = dregs->udc_data;
udelay(SUN3_DMA_DELAY);
return ret;
}
static inline void sun3_udc_write(unsigned short val, unsigned char reg)
{
dregs->udc_addr = reg;
udelay(SUN3_DMA_DELAY);
dregs->udc_data = val;
udelay(SUN3_DMA_DELAY);
}
#endif
#ifdef RESET_BOOT
static void sun3_scsi_reset_boot(struct Scsi_Host *instance)
{
unsigned long end;
/*
* Do a SCSI reset to clean up the bus during initialization. No
* messing with the queues, interrupts, or locks necessary here.
*/
printk( "Sun3 SCSI: resetting the SCSI bus..." );
/* switch off SCSI IRQ - catch an interrupt without IRQ bit set else */
// sun3_disable_irq( IRQ_SUN3_SCSI );
/* get in phase */
NCR5380_write( TARGET_COMMAND_REG,
PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) ));
/* assert RST */
NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST );
/* The min. reset hold time is 25us, so 40us should be enough */
udelay( 50 );
/* reset RST and interrupt */
NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE );
NCR5380_read( RESET_PARITY_INTERRUPT_REG );
for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); )
barrier();
/* switch on SCSI IRQ again */
// sun3_enable_irq( IRQ_SUN3_SCSI );
printk( " done\n" );
}
#endif
// safe bits for the CSR
#define CSR_GOOD 0x060f
static irqreturn_t scsi_sun3_intr(int irq, void *dummy)
{
unsigned short csr = dregs->csr;
int handled = 0;
#ifdef SUN3_SCSI_VME
dregs->csr &= ~CSR_DMA_ENABLE;
#endif
if(csr & ~CSR_GOOD) {
if(csr & CSR_DMA_BUSERR) {
printk("scsi%d: bus error in dma\n", default_instance->host_no);
}
if(csr & CSR_DMA_CONFLICT) {
printk("scsi%d: dma conflict\n", default_instance->host_no);
}
handled = 1;
}
if(csr & (CSR_SDB_INT | CSR_DMA_INT)) {
NCR5380_intr(irq, dummy);
handled = 1;
}
return IRQ_RETVAL(handled);
}
/*
* Debug stuff - to be called on NMI, or sysrq key. Use at your own risk;
* reentering NCR5380_print_status seems to have ugly side effects
*/
/* this doesn't seem to get used at all -- sam */
#if 0
void sun3_sun3_debug (void)
{
unsigned long flags;
if (default_instance) {
local_irq_save(flags);
NCR5380_print_status(default_instance);
local_irq_restore(flags);
}
}
#endif
/* sun3scsi_dma_setup() -- initialize the dma controller for a read/write */
static unsigned long sun3scsi_dma_setup(void *data, unsigned long count, int write_flag)
{
void *addr;
if(sun3_dma_orig_addr != NULL)
dvma_unmap(sun3_dma_orig_addr);
#ifdef SUN3_SCSI_VME
addr = (void *)dvma_map_vme((unsigned long) data, count);
#else
addr = (void *)dvma_map((unsigned long) data, count);
#endif
sun3_dma_orig_addr = addr;
sun3_dma_orig_count = count;
#ifndef SUN3_SCSI_VME
dregs->fifo_count = 0;
sun3_udc_write(UDC_RESET, UDC_CSR);
/* reset fifo */
dregs->csr &= ~CSR_FIFO;
dregs->csr |= CSR_FIFO;
#endif
/* set direction */
if(write_flag)
dregs->csr |= CSR_SEND;
else
dregs->csr &= ~CSR_SEND;
#ifdef SUN3_SCSI_VME
dregs->csr |= CSR_PACK_ENABLE;
dregs->dma_addr_hi = ((unsigned long)addr >> 16);
dregs->dma_addr_lo = ((unsigned long)addr & 0xffff);
dregs->dma_count_hi = 0;
dregs->dma_count_lo = 0;
dregs->fifo_count_hi = 0;
dregs->fifo_count = 0;
#else
/* byte count for fifo */
dregs->fifo_count = count;
sun3_udc_write(UDC_RESET, UDC_CSR);
/* reset fifo */
dregs->csr &= ~CSR_FIFO;
dregs->csr |= CSR_FIFO;
if(dregs->fifo_count != count) {
printk("scsi%d: fifo_mismatch %04x not %04x\n",
default_instance->host_no, dregs->fifo_count,
(unsigned int) count);
NCR5380_dprint(NDEBUG_DMA, default_instance);
}
/* setup udc */
udc_regs->addr_hi = (((unsigned long)(addr) & 0xff0000) >> 8);
udc_regs->addr_lo = ((unsigned long)(addr) & 0xffff);
udc_regs->count = count/2; /* count in words */
udc_regs->mode_hi = UDC_MODE_HIWORD;
if(write_flag) {
if(count & 1)
udc_regs->count++;
udc_regs->mode_lo = UDC_MODE_LSEND;
udc_regs->rsel = UDC_RSEL_SEND;
} else {
udc_regs->mode_lo = UDC_MODE_LRECV;
udc_regs->rsel = UDC_RSEL_RECV;
}
/* announce location of regs block */
sun3_udc_write(((dvma_vtob(udc_regs) & 0xff0000) >> 8),
UDC_CHN_HI);
sun3_udc_write((dvma_vtob(udc_regs) & 0xffff), UDC_CHN_LO);
/* set dma master on */
sun3_udc_write(0xd, UDC_MODE);
/* interrupt enable */
sun3_udc_write(UDC_INT_ENABLE, UDC_CSR);
#endif
return count;
}
#ifndef SUN3_SCSI_VME
static inline unsigned long sun3scsi_dma_count(struct Scsi_Host *instance)
{
unsigned short resid;
dregs->udc_addr = 0x32;
udelay(SUN3_DMA_DELAY);
resid = dregs->udc_data;
udelay(SUN3_DMA_DELAY);
resid *= 2;
return (unsigned long) resid;
}
#endif
static inline unsigned long sun3scsi_dma_residual(struct Scsi_Host *instance)
{
return last_residual;
}
static inline unsigned long sun3scsi_dma_xfer_len(unsigned long wanted,
struct scsi_cmnd *cmd,
int write_flag)
{
if (cmd->request->cmd_type == REQ_TYPE_FS)
return wanted;
else
return 0;
}
static inline int sun3scsi_dma_start(unsigned long count, unsigned char *data)
{
#ifdef SUN3_SCSI_VME
unsigned short csr;
csr = dregs->csr;
dregs->dma_count_hi = (sun3_dma_orig_count >> 16);
dregs->dma_count_lo = (sun3_dma_orig_count & 0xffff);
dregs->fifo_count_hi = (sun3_dma_orig_count >> 16);
dregs->fifo_count = (sun3_dma_orig_count & 0xffff);
/* if(!(csr & CSR_DMA_ENABLE))
* dregs->csr |= CSR_DMA_ENABLE;
*/
#else
sun3_udc_write(UDC_CHN_START, UDC_CSR);
#endif
return 0;
}
/* clean up after our dma is done */
static int sun3scsi_dma_finish(int write_flag)
{
unsigned short __maybe_unused count;
unsigned short fifo;
int ret = 0;
sun3_dma_active = 0;
#ifdef SUN3_SCSI_VME
dregs->csr &= ~CSR_DMA_ENABLE;
fifo = dregs->fifo_count;
if (write_flag) {
if ((fifo > 0) && (fifo < sun3_dma_orig_count))
fifo++;
}
last_residual = fifo;
/* empty bytes from the fifo which didn't make it */
if ((!write_flag) && (dregs->csr & CSR_LEFT)) {
unsigned char *vaddr;
vaddr = (unsigned char *)dvma_vmetov(sun3_dma_orig_addr);
vaddr += (sun3_dma_orig_count - fifo);
vaddr--;
switch (dregs->csr & CSR_LEFT) {
case CSR_LEFT_3:
*vaddr = (dregs->bpack_lo & 0xff00) >> 8;
vaddr--;
case CSR_LEFT_2:
*vaddr = (dregs->bpack_hi & 0x00ff);
vaddr--;
case CSR_LEFT_1:
*vaddr = (dregs->bpack_hi & 0xff00) >> 8;
break;
}
}
#else
// check to empty the fifo on a read
if(!write_flag) {
int tmo = 20000; /* .2 sec */
while(1) {
if(dregs->csr & CSR_FIFO_EMPTY)
break;
if(--tmo <= 0) {
printk("sun3scsi: fifo failed to empty!\n");
return 1;
}
udelay(10);
}
}
count = sun3scsi_dma_count(default_instance);
fifo = dregs->fifo_count;
last_residual = fifo;
/* empty bytes from the fifo which didn't make it */
if((!write_flag) && (count - fifo) == 2) {
unsigned short data;
unsigned char *vaddr;
data = dregs->fifo_data;
vaddr = (unsigned char *)dvma_btov(sun3_dma_orig_addr);
vaddr += (sun3_dma_orig_count - fifo);
vaddr[-2] = (data & 0xff00) >> 8;
vaddr[-1] = (data & 0xff);
}
#endif
dvma_unmap(sun3_dma_orig_addr);
sun3_dma_orig_addr = NULL;
#ifdef SUN3_SCSI_VME
dregs->dma_addr_hi = 0;
dregs->dma_addr_lo = 0;
dregs->dma_count_hi = 0;
dregs->dma_count_lo = 0;
dregs->fifo_count = 0;
dregs->fifo_count_hi = 0;
dregs->csr &= ~CSR_SEND;
/* dregs->csr |= CSR_DMA_ENABLE; */
#else
sun3_udc_write(UDC_RESET, UDC_CSR);
dregs->fifo_count = 0;
dregs->csr &= ~CSR_SEND;
/* reset fifo */
dregs->csr &= ~CSR_FIFO;
dregs->csr |= CSR_FIFO;
#endif
sun3_dma_setup_done = NULL;
return ret;
}
#include "atari_NCR5380.c"
#ifdef SUN3_SCSI_VME
#define SUN3_SCSI_NAME "Sun3 NCR5380 VME SCSI"
#define DRV_MODULE_NAME "sun3_scsi_vme"
#else
#define SUN3_SCSI_NAME "Sun3 NCR5380 SCSI"
#define DRV_MODULE_NAME "sun3_scsi"
#endif
#define PFX DRV_MODULE_NAME ": "
static struct scsi_host_template sun3_scsi_template = {
.module = THIS_MODULE,
.proc_name = DRV_MODULE_NAME,
.show_info = sun3scsi_show_info,
.name = SUN3_SCSI_NAME,
.info = sun3scsi_info,
.queuecommand = sun3scsi_queue_command,
.eh_abort_handler = sun3scsi_abort,
.eh_bus_reset_handler = sun3scsi_bus_reset,
.can_queue = 16,
.this_id = 7,
.sg_tablesize = SG_NONE,
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING
};
static int __init sun3_scsi_probe(struct platform_device *pdev)
{
struct Scsi_Host *instance;
int error;
struct resource *irq, *mem;
unsigned char *ioaddr;
int host_flags = 0;
#ifdef SUN3_SCSI_VME
int i;
#endif
if (setup_can_queue > 0)
sun3_scsi_template.can_queue = setup_can_queue;
if (setup_cmd_per_lun > 0)
sun3_scsi_template.cmd_per_lun = setup_cmd_per_lun;
if (setup_sg_tablesize >= 0)
sun3_scsi_template.sg_tablesize = setup_sg_tablesize;
if (setup_hostid >= 0)
sun3_scsi_template.this_id = setup_hostid & 7;
#ifdef SUN3_SCSI_VME
ioaddr = NULL;
for (i = 0; i < 2; i++) {
unsigned char x;
irq = platform_get_resource(pdev, IORESOURCE_IRQ, i);
mem = platform_get_resource(pdev, IORESOURCE_MEM, i);
if (!irq || !mem)
break;
ioaddr = sun3_ioremap(mem->start, resource_size(mem),
SUN3_PAGE_TYPE_VME16);
dregs = (struct sun3_dma_regs *)(ioaddr + 8);
if (sun3_map_test((unsigned long)dregs, &x)) {
unsigned short oldcsr;
oldcsr = dregs->csr;
dregs->csr = 0;
udelay(SUN3_DMA_DELAY);
if (dregs->csr == 0x1400)
break;
dregs->csr = oldcsr;
}
iounmap(ioaddr);
ioaddr = NULL;
}
if (!ioaddr)
return -ENODEV;
#else
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!irq || !mem)
return -ENODEV;
ioaddr = ioremap(mem->start, resource_size(mem));
dregs = (struct sun3_dma_regs *)(ioaddr + 8);
udc_regs = dvma_malloc(sizeof(struct sun3_udc_regs));
if (!udc_regs) {
pr_err(PFX "couldn't allocate DVMA memory!\n");
iounmap(ioaddr);
return -ENOMEM;
}
#endif
sun3_scsi_regp = ioaddr;
instance = scsi_host_alloc(&sun3_scsi_template,
sizeof(struct NCR5380_hostdata));
if (!instance) {
error = -ENOMEM;
goto fail_alloc;
}
default_instance = instance;
instance->io_port = (unsigned long)ioaddr;
instance->irq = irq->start;
#ifdef SUPPORT_TAGS
host_flags |= setup_use_tagged_queuing > 0 ? FLAG_TAGGED_QUEUING : 0;
#endif
NCR5380_init(instance, host_flags);
error = request_irq(instance->irq, scsi_sun3_intr, 0,
"NCR5380", instance);
if (error) {
#ifdef REAL_DMA
pr_err(PFX "scsi%d: IRQ %d not free, bailing out\n",
instance->host_no, instance->irq);
goto fail_irq;
#else
pr_warn(PFX "scsi%d: IRQ %d not free, interrupts disabled\n",
instance->host_no, instance->irq);
instance->irq = NO_IRQ;
#endif
}
dregs->csr = 0;
udelay(SUN3_DMA_DELAY);
dregs->csr = CSR_SCSI | CSR_FIFO | CSR_INTR;
udelay(SUN3_DMA_DELAY);
dregs->fifo_count = 0;
#ifdef SUN3_SCSI_VME
dregs->fifo_count_hi = 0;
dregs->dma_addr_hi = 0;
dregs->dma_addr_lo = 0;
dregs->dma_count_hi = 0;
dregs->dma_count_lo = 0;
dregs->ivect = VME_DATA24 | (instance->irq & 0xff);
#endif
#ifdef RESET_BOOT
sun3_scsi_reset_boot(instance);
#endif
error = scsi_add_host(instance, NULL);
if (error)
goto fail_host;
platform_set_drvdata(pdev, instance);
scsi_scan_host(instance);
return 0;
fail_host:
if (instance->irq != NO_IRQ)
free_irq(instance->irq, instance);
fail_irq:
NCR5380_exit(instance);
scsi_host_put(instance);
fail_alloc:
if (udc_regs)
dvma_free(udc_regs);
iounmap(sun3_scsi_regp);
return error;
}
static int __exit sun3_scsi_remove(struct platform_device *pdev)
{
struct Scsi_Host *instance = platform_get_drvdata(pdev);
scsi_remove_host(instance);
if (instance->irq != NO_IRQ)
free_irq(instance->irq, instance);
NCR5380_exit(instance);
scsi_host_put(instance);
if (udc_regs)
dvma_free(udc_regs);
iounmap(sun3_scsi_regp);
return 0;
}
static struct platform_driver sun3_scsi_driver = {
.remove = __exit_p(sun3_scsi_remove),
.driver = {
.name = DRV_MODULE_NAME,
.owner = THIS_MODULE,
},
};
module_platform_driver_probe(sun3_scsi_driver, sun3_scsi_probe);
MODULE_ALIAS("platform:" DRV_MODULE_NAME);
MODULE_LICENSE("GPL");