9552203cb0
This commit adds the stdout-path property in /chosen for all Armada boards that were not yet carrying this property, and gets rid of /chosen/bootargs which becomes unneeded: earlyprintk should not be used by default, and the console= parameter is replaced by the /chosen/stdout-path property. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
306 lines
7.0 KiB
Plaintext
306 lines
7.0 KiB
Plaintext
/*
|
|
* Device Tree file for NETGEAR ReadyNAS 104
|
|
*
|
|
* Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include "armada-370.dtsi"
|
|
|
|
/ {
|
|
model = "NETGEAR ReadyNAS 104";
|
|
compatible = "netgear,readynas-104", "marvell,armada370", "marvell,armada-370-xp";
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x20000000>; /* 512 MB */
|
|
};
|
|
|
|
soc {
|
|
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
|
|
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
|
|
|
|
pcie-controller {
|
|
status = "okay";
|
|
|
|
/* Connected to FL1009 USB 3.0 controller */
|
|
pcie@1,0 {
|
|
/* Port 0, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
|
|
/* Connected to Marvell 88SE9215 SATA controller */
|
|
pcie@2,0 {
|
|
/* Port 1, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
internal-regs {
|
|
serial@12000 {
|
|
status = "okay";
|
|
};
|
|
|
|
mdio {
|
|
pinctrl-0 = <&mdio_pins>;
|
|
pinctrl-names = "default";
|
|
phy0: ethernet-phy@0 { /* Marvell 88E1318 */
|
|
reg = <0>;
|
|
};
|
|
|
|
phy1: ethernet-phy@1 { /* Marvell 88E1318 */
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
ethernet@70000 {
|
|
pinctrl-0 = <&ge0_rgmii_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
phy = <&phy0>;
|
|
phy-mode = "rgmii-id";
|
|
};
|
|
|
|
ethernet@74000 {
|
|
pinctrl-0 = <&ge1_rgmii_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
phy = <&phy1>;
|
|
phy-mode = "rgmii-id";
|
|
};
|
|
|
|
usb@50000 {
|
|
status = "okay";
|
|
};
|
|
|
|
i2c@11000 {
|
|
compatible = "marvell,mv64xxx-i2c";
|
|
clock-frequency = <100000>;
|
|
status = "okay";
|
|
|
|
isl12057: isl12057@68 {
|
|
compatible = "isil,isl12057";
|
|
reg = <0x68>;
|
|
isil,irq2-can-wakeup-machine;
|
|
};
|
|
|
|
g762: g762@3e {
|
|
compatible = "gmt,g762";
|
|
reg = <0x3e>;
|
|
clocks = <&g762_clk>; /* input clock */
|
|
fan_gear_mode = <0>;
|
|
fan_startv = <1>;
|
|
pwm_polarity = <0>;
|
|
};
|
|
|
|
pca9554: pca9554@23 {
|
|
compatible = "nxp,pca9554";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
reg = <0x23>;
|
|
};
|
|
};
|
|
|
|
nand@d0000 {
|
|
status = "okay";
|
|
num-cs = <1>;
|
|
marvell,nand-keep-config;
|
|
marvell,nand-enable-arbiter;
|
|
nand-on-flash-bbt;
|
|
|
|
/* Use Hardware BCH ECC */
|
|
nand-ecc-strength = <4>;
|
|
nand-ecc-step-size = <512>;
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x0000000 0x180000>; /* 1.5MB */
|
|
read-only;
|
|
};
|
|
|
|
partition@180000 {
|
|
label = "u-boot-env";
|
|
reg = <0x180000 0x20000>; /* 128KB */
|
|
read-only;
|
|
};
|
|
|
|
partition@200000 {
|
|
label = "uImage";
|
|
reg = <0x0200000 0x600000>; /* 6MB */
|
|
};
|
|
|
|
partition@800000 {
|
|
label = "minirootfs";
|
|
reg = <0x0800000 0x400000>; /* 4MB */
|
|
};
|
|
|
|
/* Last MB is for the BBT, i.e. not writable */
|
|
partition@c00000 {
|
|
label = "ubifs";
|
|
reg = <0x0c00000 0x7400000>; /* 116MB */
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
clocks {
|
|
g762_clk: g762-oscillator {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <8192>;
|
|
};
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-0 = <&backup_led_pin &power_led_pin>;
|
|
pinctrl-names = "default";
|
|
|
|
blue-backup-led {
|
|
label = "rn104:blue:backup";
|
|
gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
blue-power-led {
|
|
label = "rn104:blue:pwr";
|
|
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "keep";
|
|
};
|
|
|
|
blue-sata1-led {
|
|
label = "rn104:blue:sata1";
|
|
gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
|
|
default-state = "off";
|
|
};
|
|
|
|
blue-sata2-led {
|
|
label = "rn104:blue:sata2";
|
|
gpios = <&pca9554 1 GPIO_ACTIVE_LOW>;
|
|
default-state = "off";
|
|
};
|
|
|
|
blue-sata3-led {
|
|
label = "rn104:blue:sata3";
|
|
gpios = <&pca9554 2 GPIO_ACTIVE_LOW>;
|
|
default-state = "off";
|
|
};
|
|
|
|
blue-sata4-led {
|
|
label = "rn104:blue:sata4";
|
|
gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-0 = <&backup_button_pin
|
|
&power_button_pin
|
|
&reset_button_pin>;
|
|
pinctrl-names = "default";
|
|
|
|
backup-button {
|
|
label = "Backup Button";
|
|
linux,code = <KEY_COPY>;
|
|
gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
power-button {
|
|
label = "Power Button";
|
|
linux,code = <KEY_POWER>;
|
|
gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reset-button {
|
|
label = "Reset Button";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
gpio-poweroff {
|
|
compatible = "gpio-poweroff";
|
|
pinctrl-0 = <&poweroff>;
|
|
pinctrl-names = "default";
|
|
gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
poweroff: poweroff {
|
|
marvell,pins = "mpp60";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
backup_button_pin: backup-button-pin {
|
|
marvell,pins = "mpp52";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
power_button_pin: power-button-pin {
|
|
marvell,pins = "mpp62";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
backup_led_pin: backup-led-pin {
|
|
marvell,pins = "mpp63";
|
|
marvell,function = "gpo";
|
|
};
|
|
|
|
power_led_pin: power-led-pin {
|
|
marvell,pins = "mpp64";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
reset_button_pin: reset-button-pin {
|
|
marvell,pins = "mpp65";
|
|
marvell,function = "gpio";
|
|
};
|
|
};
|