c4574aa00e
There are general changes pending to make the /aliases/serial* entries number the serial ports on the system. On Tegra, so far the ports have been just numbered dynamically as they are configured so that makes them change. To avoid this, add specific aliases per board to keep the old numbers. This allows us to change the numbering by default on future SoCs while keeping the numbering on existing boards. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Thierry Reding <treding@nvidia.com>
1157 lines
30 KiB
Plaintext
1157 lines
30 KiB
Plaintext
/dts-v1/;
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include "tegra124.dtsi"
|
|
|
|
/ {
|
|
model = "NVIDIA Tegra124 Venice2";
|
|
compatible = "nvidia,venice2", "nvidia,tegra124";
|
|
|
|
aliases {
|
|
rtc0 = "/i2c@0,7000d000/pmic@40";
|
|
rtc1 = "/rtc@0,7000e000";
|
|
serial0 = &uarta;
|
|
};
|
|
|
|
memory {
|
|
reg = <0x0 0x80000000 0x0 0x80000000>;
|
|
};
|
|
|
|
host1x@0,50000000 {
|
|
hdmi@0,54280000 {
|
|
status = "okay";
|
|
|
|
vdd-supply = <&vdd_3v3_hdmi>;
|
|
pll-supply = <&vdd_hdmi_pll>;
|
|
hdmi-supply = <&vdd_5v0_hdmi>;
|
|
|
|
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
|
|
nvidia,hpd-gpio =
|
|
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
sor@0,54540000 {
|
|
status = "okay";
|
|
|
|
nvidia,dpaux = <&dpaux>;
|
|
nvidia,panel = <&panel>;
|
|
};
|
|
|
|
dpaux@0,545c0000 {
|
|
vdd-supply = <&vdd_3v3_panel>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
pinmux: pinmux@0,70000868 {
|
|
pinctrl-names = "boot";
|
|
pinctrl-0 = <&pinmux_boot>;
|
|
|
|
pinmux_boot: common {
|
|
dap_mclk1_pw4 {
|
|
nvidia,pins = "dap_mclk1_pw4";
|
|
nvidia,function = "extperiph1";
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
dap1_din_pn1 {
|
|
nvidia,pins = "dap1_din_pn1";
|
|
nvidia,function = "i2s0";
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
dap1_dout_pn2 {
|
|
nvidia,pins = "dap1_dout_pn2",
|
|
"dap1_fs_pn0",
|
|
"dap1_sclk_pn3";
|
|
nvidia,function = "i2s0";
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
dap2_din_pa4 {
|
|
nvidia,pins = "dap2_din_pa4";
|
|
nvidia,function = "i2s1";
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
dap2_dout_pa5 {
|
|
nvidia,pins = "dap2_dout_pa5",
|
|
"dap2_fs_pa2",
|
|
"dap2_sclk_pa3";
|
|
nvidia,function = "i2s1";
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
dvfs_pwm_px0 {
|
|
nvidia,pins = "dvfs_pwm_px0",
|
|
"dvfs_clk_px2";
|
|
nvidia,function = "cldvfs";
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
ulpi_clk_py0 {
|
|
nvidia,pins = "ulpi_clk_py0",
|
|
"ulpi_nxt_py2",
|
|
"ulpi_stp_py3";
|
|
nvidia,function = "spi1";
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
ulpi_dir_py1 {
|
|
nvidia,pins = "ulpi_dir_py1";
|
|
nvidia,function = "spi1";
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
cam_i2c_scl_pbb1 {
|
|
nvidia,pins = "cam_i2c_scl_pbb1",
|
|
"cam_i2c_sda_pbb2";
|
|
nvidia,function = "i2c3";
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,lock = <TEGRA_PIN_DISABLE>;
|
|
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
gen2_i2c_scl_pt5 {
|
|
nvidia,pins = "gen2_i2c_scl_pt5",
|
|
"gen2_i2c_sda_pt6";
|
|
nvidia,function = "i2c2";
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,lock = <TEGRA_PIN_DISABLE>;
|
|
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
pg4 {
|
|
nvidia,pins = "pg4",
|
|
"pg5",
|
|
"pg6",
|
|
"pi3";
|
|
nvidia,function = "spi4";
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
pg7 {
|
|
nvidia,pins = "pg7";
|
|
nvidia,function = "spi4";
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
ph1 {
|
|
nvidia,pins = "ph1";
|
|
nvidia,function = "pwm1";
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
pk0 {
|
|
nvidia,pins = "pk0",
|
|
"kb_row15_ps7",
|
|
"clk_32k_out_pa0";
|
|
nvidia,function = "soc";
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
sdmmc1_clk_pz0 {
|
|
nvidia,pins = "sdmmc1_clk_pz0";
|
|
nvidia,function = "sdmmc1";
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
sdmmc1_cmd_pz1 {
|
|
nvidia,pins = "sdmmc1_cmd_pz1",
|
|
"sdmmc1_dat0_py7",
|
|
"sdmmc1_dat1_py6",
|
|
"sdmmc1_dat2_py5",
|
|
"sdmmc1_dat3_py4";
|
|
nvidia,function = "sdmmc1";
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
sdmmc3_clk_pa6 {
|
|
nvidia,pins = "sdmmc3_clk_pa6";
|
|
nvidia,function = "sdmmc3";
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
sdmmc3_cmd_pa7 {
|
|
nvidia,pins = "sdmmc3_cmd_pa7",
|
|
"sdmmc3_dat0_pb7",
|
|
"sdmmc3_dat1_pb6",
|
|
"sdmmc3_dat2_pb5",
|
|
"sdmmc3_dat3_pb4",
|
|
"sdmmc3_clk_lb_out_pee4",
|
|
"sdmmc3_clk_lb_in_pee5";
|
|
nvidia,function = "sdmmc3";
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
sdmmc4_clk_pcc4 {
|
|
nvidia,pins = "sdmmc4_clk_pcc4";
|
|
nvidia,function = "sdmmc4";
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
sdmmc4_cmd_pt7 {
|
|
nvidia,pins = "sdmmc4_cmd_pt7",
|
|
"sdmmc4_dat0_paa0",
|
|
"sdmmc4_dat1_paa1",
|
|
"sdmmc4_dat2_paa2",
|
|
"sdmmc4_dat3_paa3",
|
|
"sdmmc4_dat4_paa4",
|
|
"sdmmc4_dat5_paa5",
|
|
"sdmmc4_dat6_paa6",
|
|
"sdmmc4_dat7_paa7";
|
|
nvidia,function = "sdmmc4";
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
pwr_i2c_scl_pz6 {
|
|
nvidia,pins = "pwr_i2c_scl_pz6",
|
|
"pwr_i2c_sda_pz7";
|
|
nvidia,function = "i2cpwr";
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,lock = <TEGRA_PIN_DISABLE>;
|
|
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
jtag_rtck {
|
|
nvidia,pins = "jtag_rtck";
|
|
nvidia,function = "rtck";
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
clk_32k_in {
|
|
nvidia,pins = "clk_32k_in";
|
|
nvidia,function = "clk";
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
core_pwr_req {
|
|
nvidia,pins = "core_pwr_req";
|
|
nvidia,function = "pwron";
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
cpu_pwr_req {
|
|
nvidia,pins = "cpu_pwr_req";
|
|
nvidia,function = "cpu";
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
pwr_int_n {
|
|
nvidia,pins = "pwr_int_n";
|
|
nvidia,function = "pmi";
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
reset_out_n {
|
|
nvidia,pins = "reset_out_n";
|
|
nvidia,function = "reset_out_n";
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
clk3_out_pee0 {
|
|
nvidia,pins = "clk3_out_pee0";
|
|
nvidia,function = "extperiph3";
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
dap4_din_pp5 {
|
|
nvidia,pins = "dap4_din_pp5";
|
|
nvidia,function = "i2s3";
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
dap4_dout_pp6 {
|
|
nvidia,pins = "dap4_dout_pp6",
|
|
"dap4_fs_pp4",
|
|
"dap4_sclk_pp7";
|
|
nvidia,function = "i2s3";
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
gen1_i2c_sda_pc5 {
|
|
nvidia,pins = "gen1_i2c_sda_pc5",
|
|
"gen1_i2c_scl_pc4";
|
|
nvidia,function = "i2c1";
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,lock = <TEGRA_PIN_DISABLE>;
|
|
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
uart2_cts_n_pj5 {
|
|
nvidia,pins = "uart2_cts_n_pj5";
|
|
nvidia,function = "uartb";
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
uart2_rts_n_pj6 {
|
|
nvidia,pins = "uart2_rts_n_pj6";
|
|
nvidia,function = "uartb";
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
uart2_rxd_pc3 {
|
|
nvidia,pins = "uart2_rxd_pc3";
|
|
nvidia,function = "irda";
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
uart2_txd_pc2 {
|
|
nvidia,pins = "uart2_txd_pc2";
|
|
nvidia,function = "irda";
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
uart3_cts_n_pa1 {
|
|
nvidia,pins = "uart3_cts_n_pa1",
|
|
"uart3_rxd_pw7";
|
|
nvidia,function = "uartc";
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
uart3_rts_n_pc0 {
|
|
nvidia,pins = "uart3_rts_n_pc0",
|
|
"uart3_txd_pw6";
|
|
nvidia,function = "uartc";
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
hdmi_cec_pee3 {
|
|
nvidia,pins = "hdmi_cec_pee3";
|
|
nvidia,function = "cec";
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,lock = <TEGRA_PIN_DISABLE>;
|
|
nvidia,open-drain = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
hdmi_int_pn7 {
|
|
nvidia,pins = "hdmi_int_pn7";
|
|
nvidia,function = "rsvd1";
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
ddc_scl_pv4 {
|
|
nvidia,pins = "ddc_scl_pv4",
|
|
"ddc_sda_pv5";
|
|
nvidia,function = "i2c4";
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,lock = <TEGRA_PIN_DISABLE>;
|
|
nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
pj7 {
|
|
nvidia,pins = "pj7",
|
|
"pk7";
|
|
nvidia,function = "uartd";
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
pb0 {
|
|
nvidia,pins = "pb0",
|
|
"pb1";
|
|
nvidia,function = "uartd";
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
ph0 {
|
|
nvidia,pins = "ph0";
|
|
nvidia,function = "pwm0";
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
kb_row10_ps2 {
|
|
nvidia,pins = "kb_row10_ps2";
|
|
nvidia,function = "uarta";
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
kb_row9_ps1 {
|
|
nvidia,pins = "kb_row9_ps1";
|
|
nvidia,function = "uarta";
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
kb_row6_pr6 {
|
|
nvidia,pins = "kb_row6_pr6";
|
|
nvidia,function = "displaya_alt";
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
usb_vbus_en0_pn4 {
|
|
nvidia,pins = "usb_vbus_en0_pn4",
|
|
"usb_vbus_en1_pn5";
|
|
nvidia,function = "usb";
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,lock = <TEGRA_PIN_DISABLE>;
|
|
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
drive_sdio1 {
|
|
nvidia,pins = "drive_sdio1";
|
|
nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
|
|
nvidia,schmitt = <TEGRA_PIN_DISABLE>;
|
|
nvidia,pull-down-strength = <32>;
|
|
nvidia,pull-up-strength = <42>;
|
|
nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
|
|
nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
|
|
};
|
|
drive_sdio3 {
|
|
nvidia,pins = "drive_sdio3";
|
|
nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
|
|
nvidia,schmitt = <TEGRA_PIN_DISABLE>;
|
|
nvidia,pull-down-strength = <20>;
|
|
nvidia,pull-up-strength = <36>;
|
|
nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
|
|
nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
|
|
};
|
|
drive_gma {
|
|
nvidia,pins = "drive_gma";
|
|
nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
|
|
nvidia,schmitt = <TEGRA_PIN_DISABLE>;
|
|
nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
|
|
nvidia,pull-down-strength = <1>;
|
|
nvidia,pull-up-strength = <2>;
|
|
nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
|
|
nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
|
|
nvidia,drive-type = <1>;
|
|
};
|
|
als_irq_l {
|
|
nvidia,pins = "gpio_x3_aud_px3";
|
|
nvidia,function = "gmi";
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
codec_irq_l {
|
|
nvidia,pins = "ph4";
|
|
nvidia,function = "gmi";
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
lcd_bl_en {
|
|
nvidia,pins = "ph2";
|
|
nvidia,function = "gmi";
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
touch_irq_l {
|
|
nvidia,pins = "gpio_w3_aud_pw3";
|
|
nvidia,function = "spi6";
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
tpm_davint_l {
|
|
nvidia,pins = "ph6";
|
|
nvidia,function = "gmi";
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
ts_irq_l {
|
|
nvidia,pins = "pk2";
|
|
nvidia,function = "gmi";
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
ts_reset_l {
|
|
nvidia,pins = "pk4";
|
|
nvidia,function = "gmi";
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
ts_shdn_l {
|
|
nvidia,pins = "pk1";
|
|
nvidia,function = "gmi";
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
ph7 {
|
|
nvidia,pins = "ph7";
|
|
nvidia,function = "gmi";
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
kb_col0_ap {
|
|
nvidia,pins = "kb_col0_pq0";
|
|
nvidia,function = "rsvd4";
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
lid_open {
|
|
nvidia,pins = "kb_row4_pr4";
|
|
nvidia,function = "rsvd3";
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
en_vdd_sd {
|
|
nvidia,pins = "kb_row0_pr0";
|
|
nvidia,function = "rsvd4";
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
ac_ok {
|
|
nvidia,pins = "pj0";
|
|
nvidia,function = "gmi";
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
sensor_irq_l {
|
|
nvidia,pins = "pi6";
|
|
nvidia,function = "gmi";
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
wifi_en {
|
|
nvidia,pins = "gpio_x7_aud_px7";
|
|
nvidia,function = "rsvd4";
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
wifi_rst_l {
|
|
nvidia,pins = "clk2_req_pcc5";
|
|
nvidia,function = "dap";
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
hp_det_l {
|
|
nvidia,pins = "ulpi_data1_po2";
|
|
nvidia,function = "spi3";
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
};
|
|
};
|
|
|
|
serial@0,70006000 {
|
|
status = "okay";
|
|
};
|
|
|
|
pwm@0,7000a000 {
|
|
status = "okay";
|
|
};
|
|
|
|
i2c@0,7000c000 {
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
|
|
acodec: audio-codec@10 {
|
|
compatible = "maxim,max98090";
|
|
reg = <0x10>;
|
|
interrupt-parent = <&gpio>;
|
|
interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
i2c@0,7000c400 {
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
|
|
trackpad@4b {
|
|
compatible = "atmel,maxtouch";
|
|
reg = <0x4b>;
|
|
interrupt-parent = <&gpio>;
|
|
interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>;
|
|
linux,gpio-keymap = <0 0 0 BTN_LEFT>;
|
|
};
|
|
};
|
|
|
|
i2c@0,7000c500 {
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
hdmi_ddc: i2c@0,7000c700 {
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
i2c@0,7000d000 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
pmic: pmic@40 {
|
|
compatible = "ams,as3722";
|
|
reg = <0x40>;
|
|
interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
ams,system-power-controller;
|
|
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&as3722_default>;
|
|
|
|
as3722_default: pinmux {
|
|
gpio0 {
|
|
pins = "gpio0";
|
|
function = "gpio";
|
|
bias-pull-down;
|
|
};
|
|
|
|
gpio1_2_4_7 {
|
|
pins = "gpio1", "gpio2", "gpio4", "gpio7";
|
|
function = "gpio";
|
|
bias-pull-up;
|
|
};
|
|
|
|
gpio3_6 {
|
|
pins = "gpio3", "gpio6";
|
|
bias-high-impedance;
|
|
};
|
|
|
|
gpio5 {
|
|
pins = "gpio5";
|
|
function = "clk32k-out";
|
|
};
|
|
};
|
|
|
|
regulators {
|
|
vsup-sd2-supply = <&vdd_5v0_sys>;
|
|
vsup-sd3-supply = <&vdd_5v0_sys>;
|
|
vsup-sd4-supply = <&vdd_5v0_sys>;
|
|
vsup-sd5-supply = <&vdd_5v0_sys>;
|
|
vin-ldo0-supply = <&vdd_1v35_lp0>;
|
|
vin-ldo1-6-supply = <&vdd_3v3_run>;
|
|
vin-ldo2-5-7-supply = <&vddio_1v8>;
|
|
vin-ldo3-4-supply = <&vdd_3v3_sys>;
|
|
vin-ldo9-10-supply = <&vdd_5v0_sys>;
|
|
vin-ldo11-supply = <&vdd_3v3_run>;
|
|
|
|
sd0 {
|
|
regulator-name = "+VDD_CPU_AP";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-min-microamp = <3500000>;
|
|
regulator-max-microamp = <3500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
ams,ext-control = <2>;
|
|
};
|
|
|
|
sd1 {
|
|
regulator-name = "+VDD_CORE";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-min-microamp = <2500000>;
|
|
regulator-max-microamp = <2500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
ams,ext-control = <1>;
|
|
};
|
|
|
|
vdd_1v35_lp0: sd2 {
|
|
regulator-name = "+1.35V_LP0(sd2)";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
sd3 {
|
|
regulator-name = "+1.35V_LP0(sd3)";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vdd_1v05_run: sd4 {
|
|
regulator-name = "+1.05V_RUN";
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
};
|
|
|
|
vddio_1v8: sd5 {
|
|
regulator-name = "+1.8V_VDDIO";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sd6 {
|
|
regulator-name = "+VDD_GPU_AP";
|
|
regulator-min-microvolt = <650000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-min-microamp = <3500000>;
|
|
regulator-max-microamp = <3500000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo0 {
|
|
regulator-name = "+1.05V_RUN_AVDD";
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
ams,ext-control = <1>;
|
|
};
|
|
|
|
ldo1 {
|
|
regulator-name = "+1.8V_RUN_CAM";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo2 {
|
|
regulator-name = "+1.2V_GEN_AVDD";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo3 {
|
|
regulator-name = "+1.00V_LP0_VDD_RTC";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
ams,enable-tracking;
|
|
};
|
|
|
|
vdd_run_cam: ldo4 {
|
|
regulator-name = "+3.3V_RUN_CAM";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
ldo5 {
|
|
regulator-name = "+1.2V_RUN_CAM_FRONT";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
vddio_sdmmc3: ldo6 {
|
|
regulator-name = "+VDDIO_SDMMC3";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
ldo7 {
|
|
regulator-name = "+1.05V_RUN_CAM_REAR";
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
};
|
|
|
|
ldo9 {
|
|
regulator-name = "+2.8V_RUN_TOUCH";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
ldo10 {
|
|
regulator-name = "+2.8V_RUN_CAM_AF";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
ldo11 {
|
|
regulator-name = "+1.8V_RUN_VPP_FUSE";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
spi@0,7000d400 {
|
|
status = "okay";
|
|
|
|
cros_ec: cros-ec@0 {
|
|
compatible = "google,cros-ec-spi";
|
|
spi-max-frequency = <4000000>;
|
|
interrupt-parent = <&gpio>;
|
|
interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
|
|
reg = <0>;
|
|
|
|
google,cros-ec-spi-msg-delay = <2000>;
|
|
|
|
i2c-tunnel {
|
|
compatible = "google,cros-ec-i2c-tunnel";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
google,remote-bus = <0>;
|
|
|
|
charger: bq24735@9 {
|
|
compatible = "ti,bq24735";
|
|
reg = <0x9>;
|
|
interrupt-parent = <&gpio>;
|
|
interrupts = <TEGRA_GPIO(J, 0)
|
|
GPIO_ACTIVE_HIGH>;
|
|
ti,ac-detect-gpios = <&gpio
|
|
TEGRA_GPIO(J, 0)
|
|
GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
battery: sbs-battery@b {
|
|
compatible = "sbs,sbs-battery";
|
|
reg = <0xb>;
|
|
sbs,i2c-retry-count = <2>;
|
|
sbs,poll-retry-count = <1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
spi@0,7000da00 {
|
|
status = "okay";
|
|
spi-max-frequency = <25000000>;
|
|
spi-flash@0 {
|
|
compatible = "winbond,w25q32dw";
|
|
reg = <0>;
|
|
spi-max-frequency = <20000000>;
|
|
};
|
|
};
|
|
|
|
pmc@0,7000e400 {
|
|
nvidia,invert-interrupt;
|
|
nvidia,suspend-mode = <1>;
|
|
nvidia,cpu-pwr-good-time = <500>;
|
|
nvidia,cpu-pwr-off-time = <300>;
|
|
nvidia,core-pwr-good-time = <641 3845>;
|
|
nvidia,core-pwr-off-time = <61036>;
|
|
nvidia,core-power-req-active-high;
|
|
nvidia,sys-clock-req-active-high;
|
|
};
|
|
|
|
hda@0,70030000 {
|
|
status = "okay";
|
|
};
|
|
|
|
sdhci@0,700b0400 {
|
|
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
|
|
power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
|
|
wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
bus-width = <4>;
|
|
vqmmc-supply = <&vddio_sdmmc3>;
|
|
};
|
|
|
|
sdhci@0,700b0600 {
|
|
status = "okay";
|
|
bus-width = <8>;
|
|
};
|
|
|
|
ahub@0,70300000 {
|
|
i2s@0,70301100 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
usb@0,7d000000 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb-phy@0,7d000000 {
|
|
status = "okay";
|
|
vbus-supply = <&vdd_usb1_vbus>;
|
|
};
|
|
|
|
usb@0,7d004000 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb-phy@0,7d004000 {
|
|
status = "okay";
|
|
vbus-supply = <&vdd_run_cam>;
|
|
};
|
|
|
|
usb@0,7d008000 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb-phy@0,7d008000 {
|
|
status = "okay";
|
|
vbus-supply = <&vdd_usb3_vbus>;
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
|
|
enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
|
|
power-supply = <&vdd_led>;
|
|
pwms = <&pwm 1 1000000>;
|
|
|
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
|
default-brightness-level = <6>;
|
|
};
|
|
|
|
clocks {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
clk32k_in: clock@0 {
|
|
compatible = "fixed-clock";
|
|
reg = <0>;
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
power {
|
|
label = "Power";
|
|
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_POWER>;
|
|
debounce-interval = <10>;
|
|
gpio-key,wakeup;
|
|
};
|
|
};
|
|
|
|
panel: panel {
|
|
compatible = "lg,lp129qe", "simple-panel";
|
|
|
|
backlight = <&backlight>;
|
|
ddc-i2c-bus = <&dpaux>;
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
vdd_mux: regulator@0 {
|
|
compatible = "regulator-fixed";
|
|
reg = <0>;
|
|
regulator-name = "+VDD_MUX";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vdd_5v0_sys: regulator@1 {
|
|
compatible = "regulator-fixed";
|
|
reg = <1>;
|
|
regulator-name = "+5V_SYS";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
vin-supply = <&vdd_mux>;
|
|
};
|
|
|
|
vdd_3v3_sys: regulator@2 {
|
|
compatible = "regulator-fixed";
|
|
reg = <2>;
|
|
regulator-name = "+3.3V_SYS";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
vin-supply = <&vdd_mux>;
|
|
};
|
|
|
|
vdd_3v3_run: regulator@3 {
|
|
compatible = "regulator-fixed";
|
|
reg = <3>;
|
|
regulator-name = "+3.3V_RUN";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
vin-supply = <&vdd_3v3_sys>;
|
|
};
|
|
|
|
vdd_3v3_hdmi: regulator@4 {
|
|
compatible = "regulator-fixed";
|
|
reg = <4>;
|
|
regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vdd_3v3_run>;
|
|
};
|
|
|
|
vdd_led: regulator@5 {
|
|
compatible = "regulator-fixed";
|
|
reg = <5>;
|
|
regulator-name = "+VDD_LED";
|
|
gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
vin-supply = <&vdd_mux>;
|
|
};
|
|
|
|
vdd_5v0_ts: regulator@6 {
|
|
compatible = "regulator-fixed";
|
|
reg = <6>;
|
|
regulator-name = "+5V_VDD_TS_SW";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-boot-on;
|
|
gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
vin-supply = <&vdd_5v0_sys>;
|
|
};
|
|
|
|
vdd_usb1_vbus: regulator@7 {
|
|
compatible = "regulator-fixed";
|
|
reg = <7>;
|
|
regulator-name = "+5V_USB_HS";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
gpio-open-drain;
|
|
vin-supply = <&vdd_5v0_sys>;
|
|
};
|
|
|
|
vdd_usb3_vbus: regulator@8 {
|
|
compatible = "regulator-fixed";
|
|
reg = <8>;
|
|
regulator-name = "+5V_USB_SS";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
gpio-open-drain;
|
|
vin-supply = <&vdd_5v0_sys>;
|
|
};
|
|
|
|
vdd_3v3_panel: regulator@9 {
|
|
compatible = "regulator-fixed";
|
|
reg = <9>;
|
|
regulator-name = "+3.3V_PANEL";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
vin-supply = <&vdd_3v3_run>;
|
|
};
|
|
|
|
vdd_3v3_lp0: regulator@10 {
|
|
compatible = "regulator-fixed";
|
|
reg = <10>;
|
|
regulator-name = "+3.3V_LP0";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
/*
|
|
* TODO: find a way to wire this up with the USB EHCI
|
|
* controllers so that it can be enabled on demand.
|
|
*/
|
|
regulator-always-on;
|
|
gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
vin-supply = <&vdd_3v3_sys>;
|
|
};
|
|
|
|
vdd_hdmi_pll: regulator@11 {
|
|
compatible = "regulator-fixed";
|
|
reg = <11>;
|
|
regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
|
|
vin-supply = <&vdd_1v05_run>;
|
|
};
|
|
|
|
vdd_5v0_hdmi: regulator@12 {
|
|
compatible = "regulator-fixed";
|
|
reg = <12>;
|
|
regulator-name = "+5V_HDMI_CON";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
vin-supply = <&vdd_5v0_sys>;
|
|
};
|
|
};
|
|
|
|
sound {
|
|
compatible = "nvidia,tegra-audio-max98090-venice2",
|
|
"nvidia,tegra-audio-max98090";
|
|
nvidia,model = "NVIDIA Tegra Venice2";
|
|
|
|
nvidia,audio-routing =
|
|
"Headphones", "HPR",
|
|
"Headphones", "HPL",
|
|
"Speakers", "SPKR",
|
|
"Speakers", "SPKL",
|
|
"Mic Jack", "MICBIAS",
|
|
"IN34", "Mic Jack";
|
|
|
|
nvidia,i2s-controller = <&tegra_i2s1>;
|
|
nvidia,audio-codec = <&acodec>;
|
|
|
|
clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
|
|
<&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
|
|
<&tegra_car TEGRA124_CLK_EXTERN1>;
|
|
clock-names = "pll_a", "pll_a_out0", "mclk";
|
|
};
|
|
};
|
|
|
|
#include "cros-ec-keyboard.dtsi"
|