349 lines
8.6 KiB
C
349 lines
8.6 KiB
C
/*
|
|
* linux/arch/arm/mach-omap2/usb-tusb6010.c
|
|
*
|
|
* Copyright (C) 2006 Nokia Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#include <linux/usb/musb.h>
|
|
|
|
#include <plat/gpmc.h>
|
|
#include <plat/mux.h>
|
|
|
|
|
|
static u8 async_cs, sync_cs;
|
|
static unsigned refclk_psec;
|
|
|
|
|
|
/* t2_ps, when quantized to fclk units, must happen no earlier than
|
|
* the clock after after t1_NS.
|
|
*
|
|
* Return a possibly updated value of t2_ps, converted to nsec.
|
|
*/
|
|
static unsigned
|
|
next_clk(unsigned t1_NS, unsigned t2_ps, unsigned fclk_ps)
|
|
{
|
|
unsigned t1_ps = t1_NS * 1000;
|
|
unsigned t1_f, t2_f;
|
|
|
|
if ((t1_ps + fclk_ps) < t2_ps)
|
|
return t2_ps / 1000;
|
|
|
|
t1_f = (t1_ps + fclk_ps - 1) / fclk_ps;
|
|
t2_f = (t2_ps + fclk_ps - 1) / fclk_ps;
|
|
|
|
if (t1_f >= t2_f)
|
|
t2_f = t1_f + 1;
|
|
|
|
return (t2_f * fclk_ps) / 1000;
|
|
}
|
|
|
|
/* NOTE: timings are from tusb 6010 datasheet Rev 1.8, 12-Sept 2006 */
|
|
|
|
static int tusb_set_async_mode(unsigned sysclk_ps, unsigned fclk_ps)
|
|
{
|
|
struct gpmc_timings t;
|
|
unsigned t_acsnh_advnh = sysclk_ps + 3000;
|
|
unsigned tmp;
|
|
|
|
memset(&t, 0, sizeof(t));
|
|
|
|
/* CS_ON = t_acsnh_acsnl */
|
|
t.cs_on = 8;
|
|
/* ADV_ON = t_acsnh_advnh - t_advn */
|
|
t.adv_on = next_clk(t.cs_on, t_acsnh_advnh - 7000, fclk_ps);
|
|
|
|
/*
|
|
* READ ... from omap2420 TRM fig 12-13
|
|
*/
|
|
|
|
/* ADV_RD_OFF = t_acsnh_advnh */
|
|
t.adv_rd_off = next_clk(t.adv_on, t_acsnh_advnh, fclk_ps);
|
|
|
|
/* OE_ON = t_acsnh_advnh + t_advn_oen (then wait for nRDY) */
|
|
t.oe_on = next_clk(t.adv_on, t_acsnh_advnh + 1000, fclk_ps);
|
|
|
|
/* ACCESS = counters continue only after nRDY */
|
|
tmp = t.oe_on * 1000 + 300;
|
|
t.access = next_clk(t.oe_on, tmp, fclk_ps);
|
|
|
|
/* OE_OFF = after data gets sampled */
|
|
tmp = t.access * 1000;
|
|
t.oe_off = next_clk(t.access, tmp, fclk_ps);
|
|
|
|
t.cs_rd_off = t.oe_off;
|
|
|
|
tmp = t.cs_rd_off * 1000 + 7000 /* t_acsn_rdy_z */;
|
|
t.rd_cycle = next_clk(t.cs_rd_off, tmp, fclk_ps);
|
|
|
|
/*
|
|
* WRITE ... from omap2420 TRM fig 12-15
|
|
*/
|
|
|
|
/* ADV_WR_OFF = t_acsnh_advnh */
|
|
t.adv_wr_off = t.adv_rd_off;
|
|
|
|
/* WE_ON = t_acsnh_advnh + t_advn_wen (then wait for nRDY) */
|
|
t.we_on = next_clk(t.adv_wr_off, t_acsnh_advnh + 1000, fclk_ps);
|
|
|
|
/* WE_OFF = after data gets sampled */
|
|
tmp = t.we_on * 1000 + 300;
|
|
t.we_off = next_clk(t.we_on, tmp, fclk_ps);
|
|
|
|
t.cs_wr_off = t.we_off;
|
|
|
|
tmp = t.cs_wr_off * 1000 + 7000 /* t_acsn_rdy_z */;
|
|
t.wr_cycle = next_clk(t.cs_wr_off, tmp, fclk_ps);
|
|
|
|
return gpmc_cs_set_timings(async_cs, &t);
|
|
}
|
|
|
|
static int tusb_set_sync_mode(unsigned sysclk_ps, unsigned fclk_ps)
|
|
{
|
|
struct gpmc_timings t;
|
|
unsigned t_scsnh_advnh = sysclk_ps + 3000;
|
|
unsigned tmp;
|
|
|
|
memset(&t, 0, sizeof(t));
|
|
t.cs_on = 8;
|
|
|
|
/* ADV_ON = t_acsnh_advnh - t_advn */
|
|
t.adv_on = next_clk(t.cs_on, t_scsnh_advnh - 7000, fclk_ps);
|
|
|
|
/* GPMC_CLK rate = fclk rate / div */
|
|
t.sync_clk = 12 /* 11.1 nsec */;
|
|
tmp = (t.sync_clk * 1000 + fclk_ps - 1) / fclk_ps;
|
|
if (tmp > 4)
|
|
return -ERANGE;
|
|
if (tmp <= 0)
|
|
tmp = 1;
|
|
t.page_burst_access = (fclk_ps * tmp) / 1000;
|
|
|
|
/*
|
|
* READ ... based on omap2420 TRM fig 12-19, 12-20
|
|
*/
|
|
|
|
/* ADV_RD_OFF = t_scsnh_advnh */
|
|
t.adv_rd_off = next_clk(t.adv_on, t_scsnh_advnh, fclk_ps);
|
|
|
|
/* OE_ON = t_scsnh_advnh + t_advn_oen * fclk_ps (then wait for nRDY) */
|
|
tmp = (t.adv_rd_off * 1000) + (3 * fclk_ps);
|
|
t.oe_on = next_clk(t.adv_on, tmp, fclk_ps);
|
|
|
|
/* ACCESS = number of clock cycles after t_adv_eon */
|
|
tmp = (t.oe_on * 1000) + (5 * fclk_ps);
|
|
t.access = next_clk(t.oe_on, tmp, fclk_ps);
|
|
|
|
/* OE_OFF = after data gets sampled */
|
|
tmp = (t.access * 1000) + (1 * fclk_ps);
|
|
t.oe_off = next_clk(t.access, tmp, fclk_ps);
|
|
|
|
t.cs_rd_off = t.oe_off;
|
|
|
|
tmp = t.cs_rd_off * 1000 + 7000 /* t_scsn_rdy_z */;
|
|
t.rd_cycle = next_clk(t.cs_rd_off, tmp, fclk_ps);
|
|
|
|
/*
|
|
* WRITE ... based on omap2420 TRM fig 12-21
|
|
*/
|
|
|
|
/* ADV_WR_OFF = t_scsnh_advnh */
|
|
t.adv_wr_off = t.adv_rd_off;
|
|
|
|
/* WE_ON = t_scsnh_advnh + t_advn_wen * fclk_ps (then wait for nRDY) */
|
|
tmp = (t.adv_wr_off * 1000) + (3 * fclk_ps);
|
|
t.we_on = next_clk(t.adv_wr_off, tmp, fclk_ps);
|
|
|
|
/* WE_OFF = number of clock cycles after t_adv_wen */
|
|
tmp = (t.we_on * 1000) + (6 * fclk_ps);
|
|
t.we_off = next_clk(t.we_on, tmp, fclk_ps);
|
|
|
|
t.cs_wr_off = t.we_off;
|
|
|
|
tmp = t.cs_wr_off * 1000 + 7000 /* t_scsn_rdy_z */;
|
|
t.wr_cycle = next_clk(t.cs_wr_off, tmp, fclk_ps);
|
|
|
|
return gpmc_cs_set_timings(sync_cs, &t);
|
|
}
|
|
|
|
extern unsigned long gpmc_get_fclk_period(void);
|
|
|
|
/* tusb driver calls this when it changes the chip's clocking */
|
|
int tusb6010_platform_retime(unsigned is_refclk)
|
|
{
|
|
static const char error[] =
|
|
KERN_ERR "tusb6010 %s retime error %d\n";
|
|
|
|
unsigned fclk_ps = gpmc_get_fclk_period();
|
|
unsigned sysclk_ps;
|
|
int status;
|
|
|
|
if (!refclk_psec || fclk_ps == 0)
|
|
return -ENODEV;
|
|
|
|
sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60;
|
|
|
|
status = tusb_set_async_mode(sysclk_ps, fclk_ps);
|
|
if (status < 0) {
|
|
printk(error, "async", status);
|
|
goto done;
|
|
}
|
|
status = tusb_set_sync_mode(sysclk_ps, fclk_ps);
|
|
if (status < 0)
|
|
printk(error, "sync", status);
|
|
done:
|
|
return status;
|
|
}
|
|
EXPORT_SYMBOL_GPL(tusb6010_platform_retime);
|
|
|
|
static struct resource tusb_resources[] = {
|
|
/* Order is significant! The start/end fields
|
|
* are updated during setup..
|
|
*/
|
|
{ /* Asynchronous access */
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{ /* Synchronous access */
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{ /* IRQ */
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static u64 tusb_dmamask = ~(u32)0;
|
|
|
|
static struct platform_device tusb_device = {
|
|
.name = "musb_hdrc",
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &tusb_dmamask,
|
|
.coherent_dma_mask = 0xffffffff,
|
|
},
|
|
.num_resources = ARRAY_SIZE(tusb_resources),
|
|
.resource = tusb_resources,
|
|
};
|
|
|
|
|
|
/* this may be called only from board-*.c setup code */
|
|
int __init
|
|
tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
|
|
unsigned ps_refclk, unsigned waitpin,
|
|
unsigned async, unsigned sync,
|
|
unsigned irq, unsigned dmachan)
|
|
{
|
|
int status;
|
|
static char error[] __initdata =
|
|
KERN_ERR "tusb6010 init error %d, %d\n";
|
|
|
|
/* ASYNC region, primarily for PIO */
|
|
status = gpmc_cs_request(async, SZ_16M, (unsigned long *)
|
|
&tusb_resources[0].start);
|
|
if (status < 0) {
|
|
printk(error, 1, status);
|
|
return status;
|
|
}
|
|
tusb_resources[0].end = tusb_resources[0].start + 0x9ff;
|
|
async_cs = async;
|
|
gpmc_cs_write_reg(async, GPMC_CS_CONFIG1,
|
|
GPMC_CONFIG1_PAGE_LEN(2)
|
|
| GPMC_CONFIG1_WAIT_READ_MON
|
|
| GPMC_CONFIG1_WAIT_WRITE_MON
|
|
| GPMC_CONFIG1_WAIT_PIN_SEL(waitpin)
|
|
| GPMC_CONFIG1_READTYPE_ASYNC
|
|
| GPMC_CONFIG1_WRITETYPE_ASYNC
|
|
| GPMC_CONFIG1_DEVICESIZE_16
|
|
| GPMC_CONFIG1_DEVICETYPE_NOR
|
|
| GPMC_CONFIG1_MUXADDDATA);
|
|
|
|
|
|
/* SYNC region, primarily for DMA */
|
|
status = gpmc_cs_request(sync, SZ_16M, (unsigned long *)
|
|
&tusb_resources[1].start);
|
|
if (status < 0) {
|
|
printk(error, 2, status);
|
|
return status;
|
|
}
|
|
tusb_resources[1].end = tusb_resources[1].start + 0x9ff;
|
|
sync_cs = sync;
|
|
gpmc_cs_write_reg(sync, GPMC_CS_CONFIG1,
|
|
GPMC_CONFIG1_READMULTIPLE_SUPP
|
|
| GPMC_CONFIG1_READTYPE_SYNC
|
|
| GPMC_CONFIG1_WRITEMULTIPLE_SUPP
|
|
| GPMC_CONFIG1_WRITETYPE_SYNC
|
|
| GPMC_CONFIG1_CLKACTIVATIONTIME(1)
|
|
| GPMC_CONFIG1_PAGE_LEN(2)
|
|
| GPMC_CONFIG1_WAIT_READ_MON
|
|
| GPMC_CONFIG1_WAIT_WRITE_MON
|
|
| GPMC_CONFIG1_WAIT_PIN_SEL(waitpin)
|
|
| GPMC_CONFIG1_DEVICESIZE_16
|
|
| GPMC_CONFIG1_DEVICETYPE_NOR
|
|
| GPMC_CONFIG1_MUXADDDATA
|
|
/* fclk divider gets set later */
|
|
);
|
|
|
|
/* IRQ */
|
|
status = gpio_request(irq, "TUSB6010 irq");
|
|
if (status < 0) {
|
|
printk(error, 3, status);
|
|
return status;
|
|
}
|
|
gpio_direction_input(irq);
|
|
tusb_resources[2].start = irq + IH_GPIO_BASE;
|
|
|
|
/* set up memory timings ... can speed them up later */
|
|
if (!ps_refclk) {
|
|
printk(error, 4, status);
|
|
return -ENODEV;
|
|
}
|
|
refclk_psec = ps_refclk;
|
|
status = tusb6010_platform_retime(1);
|
|
if (status < 0) {
|
|
printk(error, 5, status);
|
|
return status;
|
|
}
|
|
|
|
/* finish device setup ... */
|
|
if (!data) {
|
|
printk(error, 6, status);
|
|
return -ENODEV;
|
|
}
|
|
tusb_device.dev.platform_data = data;
|
|
|
|
/* REVISIT let the driver know what DMA channels work */
|
|
if (!dmachan)
|
|
tusb_device.dev.dma_mask = NULL;
|
|
else {
|
|
/* assume OMAP 2420 ES2.0 and later */
|
|
if (dmachan & (1 << 0))
|
|
omap_cfg_reg(AA10_242X_DMAREQ0);
|
|
if (dmachan & (1 << 1))
|
|
omap_cfg_reg(AA6_242X_DMAREQ1);
|
|
if (dmachan & (1 << 2))
|
|
omap_cfg_reg(E4_242X_DMAREQ2);
|
|
if (dmachan & (1 << 3))
|
|
omap_cfg_reg(G4_242X_DMAREQ3);
|
|
if (dmachan & (1 << 4))
|
|
omap_cfg_reg(D3_242X_DMAREQ4);
|
|
if (dmachan & (1 << 5))
|
|
omap_cfg_reg(E3_242X_DMAREQ5);
|
|
}
|
|
|
|
/* so far so good ... register the device */
|
|
status = platform_device_register(&tusb_device);
|
|
if (status < 0) {
|
|
printk(error, 7, status);
|
|
return status;
|
|
}
|
|
return 0;
|
|
}
|